-
Superconducting routing platform for large-scale integration of quantum technologies
Authors:
Candice Thomas,
Jean-Philippe Michel,
Edouard Deschaseaux,
Jean Charbonnier,
Richard Souil,
Elisa Vermande,
Alain Campo,
Thierry Farjot,
Guillaume Rodriguez,
Giovanni Romano,
Frédéric Gustavo,
Baptiste Jadot,
Vivien Thiney,
Yvain Thonnart,
Gérard Billiot,
Tristan Meunier,
Maud Vinet
Abstract:
To reach large-scale quantum computing, three-dimensional integration of scalable qubit arrays and their control electronics in multi-chip assemblies is promising. Within these assemblies, the use of superconducting interconnections, as routing layers, offers interesting perspective in terms of (1) thermal management to protect the qubits from control electronics self-heating, (2) passive device p…
▽ More
To reach large-scale quantum computing, three-dimensional integration of scalable qubit arrays and their control electronics in multi-chip assemblies is promising. Within these assemblies, the use of superconducting interconnections, as routing layers, offers interesting perspective in terms of (1) thermal management to protect the qubits from control electronics self-heating, (2) passive device performance with significant increase of quality factors and (3) density rise of low and high frequency signals thanks to minimal dispersion. We report on the fabrication, using 200 mm silicon wafer technologies, of a multi-layer routing platform designed for the hybridization of spin qubit and control electronics chips. A routing level couples the qubits and the control circuits through one layer of Al0.995Cu0.005 and superconducting layers of TiN, Nb or NbN, connected between them by W-based vias. Wafer-level parametric tests at 300 K validate the yield of these technologies and low temperature electrical measurements in cryostat are used to extract the superconducting properties of the routing layers. Preliminary low temperature radio-frequency characterizations of superconducting passive elements, embedded in these routing levels, are presented.
△ Less
Submitted 21 November, 2022; v1 submitted 20 June, 2022;
originally announced June 2022.
-
Superconducting V$_3$Si for quantum circuit applications
Authors:
Tom Doekle Vethaak,
Frederic Gustavo,
Thierry Farjot,
Tomas Kubart,
Patrice Gergaud,
Shi-Li Zhang,
François Lefloch,
Fabrice Nemouchi
Abstract:
V$_3$Si thin films are known to be superconducting with transition temperatures up to 15 K, depending on the annealing temperature and the properties of the substrate underneath. Here we investigate the film structural properties with the prospect of further integration in silicon technology for quantum circuits. Two challenges have been identified: (i) the large difference in thermal expansion ra…
▽ More
V$_3$Si thin films are known to be superconducting with transition temperatures up to 15 K, depending on the annealing temperature and the properties of the substrate underneath. Here we investigate the film structural properties with the prospect of further integration in silicon technology for quantum circuits. Two challenges have been identified: (i) the large difference in thermal expansion rate between V$_3$Si and the Si substrate leads to large thermal strains after thermal processing, and (ii) the undesired silicide phase VSi$_2$ forms when V$_3$Si is deposited on silicon. The first of these is studied by depositing layers of 200 nm V$_3$Si on wafers of sapphire and oxidized silicon, neither of which react with the silicide. These samples are then heated and cooled between room temperature and 860°C, during which in-situ XRD measurements are performed. Analysis reveals a highly non-linear stress development during heating with contributions from crystallization and subsequent grain growth, as well as the thermal expansion mismatch between silicide and substrate, while the film behaves thermoelastically during cooling. The second challenge is explored by depositing films of 20, 50, 100 and 200 nm of V$_3$Si on bulk silicon. For each thickness, six samples are prepared, which are then annealed at temperatures between 500 and 750°C, followed by measurements of their resistivity, residual resistance ratio and superconducting critical temperature. A process window is identified for silicide thicknesses of at least 100 nm, within which a trade-off needs to be made between the quality of the V$_3$Si film and its consumption by the formation of VSi$_2$.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Influence of substrate-induced thermal stress on the superconducting properties of V3Si thin films
Authors:
Tom Doekle Vethaak,
Frederic Gustavo,
Thierry Farjot,
Tomas Kubart,
Patrice Gergaud,
Shi-Li Zhang,
Fabrice Nemouchi,
François Lefloch
Abstract:
Thin films of superconducting V$_3$Si were prepared by means of RF sputtering from a compound V$_3$Si target at room temperature onto sapphire and oxide-coated silicon wafers, followed by rapid thermal processing under secondary vacuum. The superconducting properties of the films thus produced are found to improve with annealing temperature, which is ascribed to a reduction of defects in the polyc…
▽ More
Thin films of superconducting V$_3$Si were prepared by means of RF sputtering from a compound V$_3$Si target at room temperature onto sapphire and oxide-coated silicon wafers, followed by rapid thermal processing under secondary vacuum. The superconducting properties of the films thus produced are found to improve with annealing temperature, which is ascribed to a reduction of defects in the polycrystalline layer. Critical temperatures ($T_\text{c}$) up to $15.3\,$K were demonstrated after thermal processing, compared to less than $1\,$K after deposition. The $T_\text{c}$ was found to always be lower on the silicon wafers, by on average $1.9(3)\,$K for the annealed samples. This difference, as well as a broadening of the superconducting transitions, is nearly independent of the annealing conditions. In-situ XRD measurements reveal that the silicide layer becomes strained upon heating due to a mismatch between the thermal expansion of the substrate and that of V$_3$Si. Taking into account the volume reduction due to crystallization, this mismatch is initially larger on sapphire, though stress relaxation allows the silicide layer to be in a relatively unstrained state after cooling. On oxidized silicon however, no clear evidence of relaxation upon cooling is observed, and the V$_3$Si ends up with an out-of-plane strain of 0.3\% at room temperature. This strain increases as the sample is cooled down to cryogenic temperatures, though the deformation of the polycrystalline layer is expected to be highly inhomogeneous. Taking into account also the reported occurrence of a Martensitic transition just above the critical temperature, this extrapolated strain distribution is found to closely match an existing model of the strain dependence of A-15 superconducting compounds.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
