Showing 1–43 of 43 results for author: Fang, N X

Phase amplification microscopy towards femtometer accuracy

Authors: Nansen Zhou, Ting Huang, Helios Y. Li, Jiawen You, Jinsong Zhang, Yujie Nie, Qihang Zhang, Chaoran Huang, Zhaoli Gao, Jinlong Zhu, Qiwen Zhan, Jianbin Xu, Nicholas X. Fang, Renjie Zhou

Abstract: Quantum devices exploiting twistronics by stacking two-dimensional materials could enable breakthroughs in computing and sensing beyond the limits of current transistors. Scaling up these devices poses grand challenges for in situ metrology, because existing tools lack the accuracy for characterizing sub-atomic structures. Here we demonstrate a laser-based interferometric method, termed Phase Ampl… ▽ More Quantum devices exploiting twistronics by stacking two-dimensional materials could enable breakthroughs in computing and sensing beyond the limits of current transistors. Scaling up these devices poses grand challenges for in situ metrology, because existing tools lack the accuracy for characterizing sub-atomic structures. Here we demonstrate a laser-based interferometric method, termed Phase Amplification microscopy (Φ-Amp), which can push the measurement accuracy limit to the femtometer-level and beyond in ambient conditions. We show Φ-Amp amplifies weak phase signals from graphene by over 100 times through devising a phase cavity based on a novel phase-gain theory, enabling real-time, wide-field mapping of atomic layers with picometer-level accuracy. We quantified interlayer spacing differences between AB-stacked and 30-degree-twisted bilayer graphene to be ~ 0.71 Å, a subtle distortion driven by quantum interactions that was previously inaccessible to in situ metrology. We envision Φ-Amp as a transformative tool for both expediting wafer-scale atomic fabrication and advancing research in quantum materials by probing subatomic phenomena. △ Less

Submitted 26 May, 2025; originally announced May 2025.

Wave characteristics and anisotropic homogenization theory of soft matters layered structure

Authors: Rui. Guo, Kai Zhang, Nicholas X. Fang

Abstract: We investigate in this work the wave characteristics and homogenization theory of soft matter layered structure in the limit of low-frequency P-wave. Using the method of potentials, we derive closed-form dispersion relationship and identify three distinct modes of the soft matter layered structure: quasistatic mode, resonance mode, and slip mode. These modes differ based on their equivalent interf… ▽ More We investigate in this work the wave characteristics and homogenization theory of soft matter layered structure in the limit of low-frequency P-wave. Using the method of potentials, we derive closed-form dispersion relationship and identify three distinct modes of the soft matter layered structure: quasistatic mode, resonance mode, and slip mode. These modes differ based on their equivalent interface conditions: a continuous interface for quasistatic mode, a spring-like interface for resonance mode, and a slip like interface for slip mode. Additionally, we propose a simplified model capturing P-wave wave characteristics in the S-wave high-frequency regime. Our findings unify wave-structure relationships across solid, liquid, and soft matter composites, offering a predictive framework for engineering metamaterials with programmable wave responses. This study offers new insight on the fundamental understanding of layered media and providing direct design principles for applications in acoustic cloaking, vibration damping, and biomedical imaging. △ Less

Submitted 19 April, 2025; originally announced April 2025.

Comments: 10 pages, 4 figures

Duality Symmetry in Causality Constraints for Enhanced Acoustic Absorption

Authors: Sichao Qu, Min Yang, Sibo Huang, Shuohan Liu, Erqian Dong, Helios Y. Li, Ping Sheng, I. David Abrahams, Nicholas X. Fang

Abstract: We derive a generalized causality constraint for acoustic reflection and transmission for a flat slab with finite thickness, via the duality transformation. It is known that achieving the upper limit of the causality constraint necessitates a critical coupling condition to optimize absorption bandwidth within a specified material thickness. However, the importance of duality symmetry has been over… ▽ More We derive a generalized causality constraint for acoustic reflection and transmission for a flat slab with finite thickness, via the duality transformation. It is known that achieving the upper limit of the causality constraint necessitates a critical coupling condition to optimize absorption bandwidth within a specified material thickness. However, the importance of duality symmetry has been overlooked in this context. Our analytical model demonstrates that optimal absorption in a 2-port setup not only relies on the well-established critical coupling but also requires duality symmetry, defined as the invariance under duality transformation. To verify our theoretical prediction, we have experimentally realized customized metamaterials that exhibit quasi-duality symmetry. This was achieved by inducing global degeneracy between the first-order monopole and dipole resonances, consequently realizing an exceptionally large sound absorption capacity as permitted by the proposed causality constraint. Our findings elucidate the intrinsic connection between duality symmetry and scattering causality, and they facilitate the exploitation of the untapped potential in existing passive absorbers for wave transport control. △ Less

Submitted 15 April, 2025; v1 submitted 24 March, 2025; originally announced March 2025.

Comments: 14 Pages, 4 Figures, 5 Extended Data Items

Achieving Peta-Ohm Resistance for Semi-Insulating 4H-SiC Devices by Atomic Layer Deposition

Authors: Yuying Xi, Helios Y. Li, Guohui Li, Qingmei Su, Kaili Mao, Bingshe Xu, Yuying Hao, Nicholas X. Fang, Yanxia Cui

Abstract: Growing demands for precise current measurements, such as atto-ampere-level measurement of cross-cellular biological current transduction, have spotlighted a pressing need for low-noise resistors with ultra-high resistance immune to voltage fluctuations. Traditional semi-insulating materials, however, struggle to provide consistent resistance across varying voltages. To bridge this gap, we introdu… ▽ More Growing demands for precise current measurements, such as atto-ampere-level measurement of cross-cellular biological current transduction, have spotlighted a pressing need for low-noise resistors with ultra-high resistance immune to voltage fluctuations. Traditional semi-insulating materials, however, struggle to provide consistent resistance across varying voltages. To bridge this gap, we introduce a design that integrates semi-insulating 4H-SiC with atomic-level metal oxide interlayers and electrodes. The strategic adjustment of surface states via atomic-scale metal oxide layers optimizes the work functions on 4H-SiC surfaces, validated through density functional theory simulations. This design transcends conventional limitations, establishing an ideal Ohmic behavior and maintains Peta-Ohm-level resistance, unaffected by voltage variations. These on-chip devices with fine-tuned resistance are compatible with integrated circuit manufacturing processes, making them ideally suited for applications in precision electronics. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Reverberation Time Control by Acoustic Metamaterials in a Small Room

Authors: Sichao Qu, Min Yang, Yunfei Xu, Songwen Xiao, Nicholas X. Fang

Abstract: In recent years, metamaterials have gained considerable attention as a promising material technology due to their unique properties and customizable design, distinguishing them from traditional materials. This article delves into the value of acoustic metamaterials in room acoustics, particularly in small room acoustics that poses specific challenges due to their significant cavity resonant nature… ▽ More In recent years, metamaterials have gained considerable attention as a promising material technology due to their unique properties and customizable design, distinguishing them from traditional materials. This article delves into the value of acoustic metamaterials in room acoustics, particularly in small room acoustics that poses specific challenges due to their significant cavity resonant nature. Small rooms usually exhibit an inhomogeneous frequency response spectrum, requiring higher wall absorption with specific spectrum to achieve a uniform acoustic environment, i.e., a constant reverberation time over a wide audible frequency band. To tackle this issue, we developed a design that simultaneously incorporates numerous subwavelength acoustic resonators at different frequencies to achieve customized broadband absorption for the walls of a specific example room. The on-site experimental measurements agree well with the numerical predictions, attesting to the robustness of the design and method. The proposed method of reverse-engineering metamaterials by targeting specific acoustic requirements has broad applicability and unique advantages in small confined spaces with high acoustic requirements, such as recording studios, listening rooms, and car cabins. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 15 pages, 6 figures

Journal ref: Building and Environment 244 (2023): 110753

Ultra-broadband suppression of sound scattering via illusion metamaterials

Authors: Chenkai Liu, Chu Ma, Yun Lai, Nicholas X. Fang

Abstract: The scattering of waves is a ubiquitous phenomenon in physics, yet there are numerous scenarios, such as the pursuit of invisibility, where suppressing it is of utmost importance. In comparison to prior methods which are restricted by limited bandwidths, here we present a technique to suppress sound scattering across an ultra-broad spectrum by utilizing illusion metamaterials. This illusion metama… ▽ More The scattering of waves is a ubiquitous phenomenon in physics, yet there are numerous scenarios, such as the pursuit of invisibility, where suppressing it is of utmost importance. In comparison to prior methods which are restricted by limited bandwidths, here we present a technique to suppress sound scattering across an ultra-broad spectrum by utilizing illusion metamaterials. This illusion metamaterial, consisting of subwavelength tunnels with precisely crafted internal structures, has the ability to guide acoustic waves around the obstacles and recreate the incoming wavefront on the exit surface. Consequently, two ultra-broadband illusionary effects are produced: disappearing space and time shift. Simultaneously, all signs of sound scattering are removed across an exceptionally wide spectrum, ranging from the quasistatic limit to an upper limit of the spectrum, as confirmed by full-wave simulations and acoustic experiments. Our approach represents a major step forward in the development of broadband functional metamaterials and holds the potential to revolutionize various fields, including acoustic camouflage and reverberation control. △ Less

Submitted 21 April, 2023; originally announced May 2023.

Inverse design of artificial skins

Authors: Zhiguang Liu, Minkun Cai, Shenda Hong, Junli Shi, Sai Xie, Chang Liu, Huifeng Du, James D. Morin, Gang Li, Wang Liu, Hong Wang, Ke Tang, Nicholas X. Fang, Chuan Fei Guo

Abstract: Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specifi… ▽ More Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specific material. Target-oriented inverse design that shows far higher output efficiency has proven effective in other fields, but is still absent for artificial skins because of the difficulties in acquiring big data. Here, we report a property-to-structure inverse design of artificial skins based on small dataset machine learning, exhibiting a comprehensive efficiency at least four orders of magnitude higher than the conventional routine. The inverse routine can predict hundreds of solutions that overcome the intrinsic signal saturation problem for linear response in hours, and the solutions are valid to a variety of materials. Our results demonstrate that the inverse design allowed by small dataset is an efficient and powerful tool to target multifarious applications of artificial skins, which can potentially advance the fields of intelligent robots, advanced healthcare, and human-machine interfaces. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Transparent matte surfaces enabled by asymmetric diffusion of white light

Authors: Hongchen Chu, Xiang Xiong, Nicholas X. Fang, Feng Wu, Runqi Jia, Ruwen Peng, Mu Wang, Yun Lai

Abstract: The traditional wisdom for achieving transparency is to minimize disordered scattering within and on the surface of materials, so as to avoid translucency. However, the lack of disordered scattering also deprives the possibility of achieving a matte surface, resulting in the specular reflection and glare on transparent materials as a severe light pollution issue. In this work, we propose a solutio… ▽ More The traditional wisdom for achieving transparency is to minimize disordered scattering within and on the surface of materials, so as to avoid translucency. However, the lack of disordered scattering also deprives the possibility of achieving a matte surface, resulting in the specular reflection and glare on transparent materials as a severe light pollution issue. In this work, we propose a solution utilizing optical metasurfaces1-2 to overcome this long-existing dilemma. Our approach leverages an asymmetric background in metasurface design to achieve highly asymmetric diffusion of white light, maximizing diffusion in reflection while minimizing it in transmission across the entire visible spectrum. Using industrial lithography, we have created macroscale transparent matte surfaces with both strong matte appearance and clear transparency, defying the conventional belief that these two optical features are incompatible. These surfaces provide a remarkable phenomenon of switching between transparent or matte appearances via the brightness contrast between the front and rear ambient lights. They also support a unique application in transparent displays and augmented reality, offering perfectly preserved clarity, wide viewing angles, full color, and one-sided displays capabilities. Our findings usher in a new era of optical materials where the desirable properties of both transparent and matte appearances can be seamlessly merged. △ Less

Submitted 1 April, 2023; v1 submitted 22 March, 2023; originally announced March 2023.

Intersonic Detachment Surface Waves in Elastomer Frictional Sliding

Authors: Huifeng Du, Emmanuel Virot, Liying Wang, Sam Kharchenko, Md Arifur Rahman, David A. Weitz, Shmuel M. Rubinstein, Nicholas X. Fang

Abstract: Elastomeric materials when sliding on clean and rough surfaces generate wrinkles at the interface due to tangential stress gradients. These interfacial folds travel along the bottom of elastomer as surface detachment waves to facilitate the apparent sliding motion of elastomer. At very low sliding speed compared to elastic surface waves, the process is dominated by surface adhesion and relaxation… ▽ More Elastomeric materials when sliding on clean and rough surfaces generate wrinkles at the interface due to tangential stress gradients. These interfacial folds travel along the bottom of elastomer as surface detachment waves to facilitate the apparent sliding motion of elastomer. At very low sliding speed compared to elastic surface waves, the process is dominated by surface adhesion and relaxation effects, and the phenomenon is historically referred to as Schallamach waves. We report in this letter the observation of fast-traveling intersonic detachment waves exceeding the Rayleigh and shear wave velocities of the soft material in contact. The spatio-temporal analysis revealed the accelerating nature of the detachment wave, and the scaling of wave speed with the elastic modului of the material suggests that this process is governed by elasticity and inertia. Multiple wave signatures on the plot were connected to different stages of surface wrinkles, as they exhibited distinctive slopes (from which velocities were derived) in the generation, propagation and rebound phases. We also characterized the frequencies of wrinkle generation in addition to the speeds and found a consistent scaling law of these two wave characteristics as the stiffness of elastomer increased. Physical implications of this new finding may further promote our understanding of elastomer noise generation mechanisms, as at macroscopic sliding velocity, the frequency of elastomer instability readily enters human audible ranges and interacts with other vibratory frequencies to cooperatively create harsh and detrimental noises in disc braking, wiper blade and shoe squeaking among many other elastomer applications. △ Less

Submitted 26 October, 2021; originally announced October 2021.

First principles study of electron transport through diarythylene transition metal dichalcogenide molecular switch

Authors: A. Ramazani, F. Shayeganfar, V. Sundararaghavan, Nicholas Xuanlai Fang

Abstract: Computational methods are fast becoming an integral part of nanoelectronics design process. With increasing computational power, electron transport simulation methods such as Non-equilibrium Greens function (NEGF) methods now hold promise in study and design of new electronic devices. Single molecule circuits as optimized device size covers a significant electron transmission, which originated of… ▽ More Computational methods are fast becoming an integral part of nanoelectronics design process. With increasing computational power, electron transport simulation methods such as Non-equilibrium Greens function (NEGF) methods now hold promise in study and design of new electronic devices. Single molecule circuits as optimized device size covers a significant electron transmission, which originated of intrinsic molecular properties. In this study, we study and design a single molecule switch based on a transition metal dichalcogenide (TMD) electrode (molybdenum disulphide (MoS2)) and a photochromic molecule. The chosen molecule, Diarylethene, is one of the only few thermally irreversible photochromes. The 1T phase of TMD monolayer has metallic properties and can act as a conducting electrode for these molecular switches. Further, the 1T phase can be functionalized using thiol chemistry, which leads to the formation of covalent C-S bonds that enable further addition of functional photochromic groups to the TMD surface. In this report, we compare and contrast different chemistry and spacer groups with respect to their response as a molecular switch, focusing on the ON/OFF transmission ratio at the Fermi level. We identify chemistries for further experimentation. If experimentally realized, these switches are expected to become integral part of various applications including molecular memories, photon detectors and logic devices. △ Less

Submitted 27 September, 2021; originally announced September 2021.

Terahertz Nonlinear Optics in Two-dimensional Semi-Hydrogenated SiB

Authors: Ali Ramazani, Farzaneh Shayeganfar, Anshuman Kumar, Nicholas X Fang

Abstract: Phase transition and current of planar clusters with loops of Josephson $π$ junction is of great importance for application in the adiabatic quantum computation devices (AQC). Each $π$-ring possesses an orbital moment with a current. The orientation of these orbital moments is altered by self-interactions and controlled with a bias current. In the current research, we construct the phase diagram o… ▽ More Phase transition and current of planar clusters with loops of Josephson $π$ junction is of great importance for application in the adiabatic quantum computation devices (AQC). Each $π$-ring possesses an orbital moment with a current. The orientation of these orbital moments is altered by self-interactions and controlled with a bias current. In the current research, we construct the phase diagram of semi-hydrogenated SiB (H-SiB) semiconductor using a two-dimensional (2D) Ising model with considering nearest-neighbor and diagonal interactions of spin planes on the on the hexagonal lattice. Our findings reveal that by decreasing temperature, two phase transitions of order and disorder occur and at low temperatures a glassy state appears, where this model maps to spin qubit. We theoretically study the magnetostriction effect by considering of laser electromagnetic field coupled to the spin planes of electric polarization of magnetic insulator for both unstrained and strained H-SiB monolayers. The dynamic of laser-spin coupling and spin current shows nonlinear optical effects and high-harmonic generation (HHG) under both terahertz (THz) and gigahertz (GHz) electromagnetic waves. The findings of this research open an avenue for experimentalists how to detect HHG in the topological insulators, Dirac systems, Mott insulators, and superconducting memories. △ Less

Submitted 2 September, 2021; originally announced September 2021.

The Effect of Twisting Angle on the Electronic Properties and Electron Transport and Hall Effect in the Twisted Circular and Rectangular Graphene and Graphene/Boron-Nitride Channels

Authors: Farzaneh Shayeganfar, Ali Ramazani, Nicholas X Fang

Abstract: Twisted bilayer graphene (tBLG) including interlayer interaction and rotational disorder shows anomalous electron transport as a function of twist-angles (tAs). In this work, we address the electronic properties and electron transport of circular and rectangular twisted graphene nanoribbon (tGN) and twisted heterostructure of graphene/boron-nitride nanoribbon (thG/BNN) channels by applying the tig… ▽ More Twisted bilayer graphene (tBLG) including interlayer interaction and rotational disorder shows anomalous electron transport as a function of twist-angles (tAs). In this work, we address the electronic properties and electron transport of circular and rectangular twisted graphene nanoribbon (tGN) and twisted heterostructure of graphene/boron-nitride nanoribbon (thG/BNN) channels by applying the tight-binding Hamiltonian for two regimes of small and large tAs. Analysis of band structure reveals that the circular tGNs for small and large tAs have metallic behavior, while phase transition of metal to semiconductor occurs in rectangular case, sweeping small tAs to large ones. This implies a different transport mechanism depending on the tAs disorder, whiles the Klein paradox appears in the transmission and conductance of circular tGNs. We distinguish that the local electron states of rectangular tGNs with large tAs create degenerate multiflat bands, supporting decoupling of two ribbons and high conductance state. However, coupled two Dirac electron gases for small tAs of rectangular channel cause Klein paradox due to their resonant scattering. We compute the Hall conductivity in both tGNs for wide range of magnetic field. In circular tGNs the valance and conduction band energy is quantized into electron/hole-like Landau level, while for rectangular tGNs with applied magnetic field the Hall conductivity shows complex behavior. Moreover, we provide a platform for quantum transport and Hall effect of thG/BNN, which host a vast nontrivial emergent electronic state. Our findings suggest that circular/rectangular tGNs and thG/BNNs with new electron states of Moiré pattern besides the Klein paradox suitable for switching of several nanochannel. △ Less

Submitted 11 June, 2023; v1 submitted 1 September, 2021; originally announced September 2021.

Comments: I would like to withdraw this paper, because we totally improve the paper based on new approaches. Thanks

High temperature mid-IR polarizer via natural in-plane hyperbolic Van der Waals crystals

Authors: Nihar Ranjan Sahoo, Saurabh Dixit, Anuj Kumar Singh, Sang Hoon Nam, Nicholas X. Fang, Anshuman Kumar

Abstract: Integration of conventional mid to long-wavelength infrared polarizers with chip-scale platforms is restricted by their bulky size and complex fabrication. Van der Waals materials based polarizer can address these challenges due to its non-lithographic fabrication, ease of integration with chip-scale platforms, and room temperature operation. In the present work, mid-IR optical response of the sub… ▽ More Integration of conventional mid to long-wavelength infrared polarizers with chip-scale platforms is restricted by their bulky size and complex fabrication. Van der Waals materials based polarizer can address these challenges due to its non-lithographic fabrication, ease of integration with chip-scale platforms, and room temperature operation. In the present work, mid-IR optical response of the sub-wavelength thin films of $α$-MoO$_3$ is investigated for application towards high temperature mid-IR transmission and reflection type thin film polarizer. To our knowledge, this is the first report of above room temperature mid-IR optical response of $α$-MoO$_3$ to determine the thermal stability of the proposed device. We find that our $α$-MoO$_3$ based polarizer retains high extinction ratio with peak value exceeding 10 dB, up to a temperature of 140$^{\circ}$C. We explain our experimental findings by natural in-plane hyperbolic anisotropy of $α$-MoO$_3$ in the mid-IR, high temperature X-ray diffraction and Raman spectroscopic measurements. This work opens up new avenues for naturally in-plane hyperbolic van der Waals thin-films to realize sub-wavelength IR optical components without lithographic constraints. △ Less

Submitted 20 August, 2021; v1 submitted 19 August, 2021; originally announced August 2021.

Comments: Corrected affiliation

On the interplay between physical and content priors in deep learning for computational imaging

Authors: Mo Deng, Shuai Li, Iksung Kang, Nicholas X. Fang, George Barbastathis

Abstract: Deep learning (DL) has been applied extensively in many computational imaging problems, often leading to superior performance over traditional iterative approaches. However, two important questions remain largely unanswered: first, how well can the trained neural network generalize to objects very different from the ones in training? This is particularly important in practice, since large-scale an… ▽ More Deep learning (DL) has been applied extensively in many computational imaging problems, often leading to superior performance over traditional iterative approaches. However, two important questions remain largely unanswered: first, how well can the trained neural network generalize to objects very different from the ones in training? This is particularly important in practice, since large-scale annotated examples similar to those of interest are often not available during training. Second, has the trained neural network learnt the underlying (inverse) physics model, or has it merely done something trivial, such as memorizing the examples or point-wise pattern matching? This pertains to the interpretability of machine-learning based algorithms. In this work, we use the Phase Extraction Neural Network (PhENN), a deep neural network (DNN) for quantitative phase retrieval in a lensless phase imaging system as the standard platform and show that the two questions are related and share a common crux: the choice of the training examples. Moreover, we connect the strength of the regularization effect imposed by a training set to the training process with the Shannon entropy of images in the dataset. That is, the higher the entropy of the training images, the weaker the regularization effect can be imposed. We also discover that weaker regularization effect leads to better learning of the underlying propagation model, i.e. the weak object transfer function, applicable for weakly scattering objects under the weak object approximation. Finally, simulation and experimental results show that better cross-domain generalization performance can be achieved if DNN is trained on a higher-entropy database, e.g. the ImageNet, than if the same DNN is trained on a lower-entropy database, e.g. MNIST, as the former allows the underlying physics model be learned better than the latter. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Scalable additive manufacturing via integral image formation

Authors: Seok Kim, Jordan Jerome Handler, Young Tae Cho, George Barbastathis, Nicholas Xuanlai Fang

Abstract: Additive manufacturing techniques enable the fabrication of functional microstructures with mechanical and chemical properties tailored to their intended use. One common technique is stereolithography, which has recently been augmented in response to modern demands to support smaller features, larger build areas, and/or faster speeds. However, a limitation is that such systems typically utilize a… ▽ More Additive manufacturing techniques enable the fabrication of functional microstructures with mechanical and chemical properties tailored to their intended use. One common technique is stereolithography, which has recently been augmented in response to modern demands to support smaller features, larger build areas, and/or faster speeds. However, a limitation is that such systems typically utilize a single-aperture imaging configuration, which restricts their ability to produce microstructures at large volumes due to the tradeoff between the image resolution and image field area. In this paper, we demonstrate three versatile imaging functions based on the coupling a planar lens array, namely, parallel image transfer, kaleidoscopic superposition, and integral reconstruction, the combination of which is termed integral lithography. In this approach, the individual microlenses in the planar lens array maintain a high numerical aperture and are employed in the creation of digital light patterns that can expand the printable area by the number of microlenses (103-104). The proposed lens array-based integral imaging system provides the concurrent ability to scale-up and scale-down incoming image fields, thereby enabling the scalable stereolithographic fabrication of three-dimensional features that surpass the resolution-to-area scaling limit. The proposed system opens up new possibilities for producing periodic microarchitectures spanning four orders of magnitude from micrometers to centimeters that can be applied to biological scaffolds, metastructures, chemical reactors, and functional surfaces. △ Less

Submitted 10 November, 2019; originally announced November 2019.

Magnetically-defined topological edge plasmons in edgeless electron gas

Authors: Dafei Jin, Yang Xia, Thomas Christensen, Siqi Wang, King Yan Fong, Matthew Freeman, Geoffrey C. Gardner, Saeed Fallahi, Qing Hu, Yuan Wang, Lloyd Engel, Michael J. Manfra, Nicolas X. Fang, Xiang Zhang

Abstract: Topological materials bear gapped excitations in bulk yet protected gapless excitations at boundaries. Magnetoplasmons (MPs), as high-frequency density excitations of two-dimensional electron gas (2DEG) in a perpendicular magnetic field, embody a prototype of band topology for bosons. The time-reversal-breaking magnetic field opens a topological gap for bulk MPs up to the cyclotron frequency; topo… ▽ More Topological materials bear gapped excitations in bulk yet protected gapless excitations at boundaries. Magnetoplasmons (MPs), as high-frequency density excitations of two-dimensional electron gas (2DEG) in a perpendicular magnetic field, embody a prototype of band topology for bosons. The time-reversal-breaking magnetic field opens a topological gap for bulk MPs up to the cyclotron frequency; topologically-protected edge magnetoplasmons (EMPs) bridge the bulk gap and propagate unidirectionally along system's boundaries. However, all the EMPs known to date adhere to physical edges where the electron density terminates abruptly. This restriction has made device application extremely difficult. Here we demonstrate a new class of topological edge plasmons -- domain-boundary magnetoplasmons (DBMPs), within a uniform edgeless 2DEG. Such DBMPs arise at the domain boundaries of an engineered sign-changing magnetic field and are protected by the difference of gap Chern numbers (+/-1) across the magnetic domains. They propagate unidirectionally along the domain boundaries and are immune to domain defects. Moreover, they exhibit wide tunability in the microwave frequency range under an applied magnetic field or gate voltage. Our study opens a new direction to realize high-speed reconfigurable topological devices. △ Less

Submitted 7 March, 2018; originally announced March 2018.

Comments: 7 pages, 6 figures

Infrared Topological Plasmons in Graphene

Authors: Dafei Jin, Thomas Christensen, Marin Soljačić, Nicholas X. Fang, Ling Lu, Xiang Zhang

Abstract: We propose a two-dimensional plasmonic platform - periodically patterned monolayer graphene - which hosts topological one-way edge states operable up to infrared frequencies. We classify the band topology of this plasmonic system under time-reversal-symmetry breaking induced by a static magnetic field. At finite doping, the system supports topologically nontrivial bandgaps with mid-gap frequencies… ▽ More We propose a two-dimensional plasmonic platform - periodically patterned monolayer graphene - which hosts topological one-way edge states operable up to infrared frequencies. We classify the band topology of this plasmonic system under time-reversal-symmetry breaking induced by a static magnetic field. At finite doping, the system supports topologically nontrivial bandgaps with mid-gap frequencies up to tens of terahertz. By the bulk-edge correspondence, these bandgaps host topologically protected one-way edge plasmons, which are immune to backscattering from structural defects and subject only to intrinsic material and radiation loss. Our findings reveal a promising approach to engineer topologically robust chiral plasmonic devices and demonstrate a realistic example of high-frequency topological edge state. △ Less

Submitted 8 February, 2017; originally announced February 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 118, 245301 (2017)

Non-intuitive Computational Optimization of Illumination Patterns for Maximum Optical Force and Torque

Authors: Yoonkyung E. Lee, Owen D. Miller, M. T. Homer Reid, Steven G. Johnson, Nicholas X. Fang

Abstract: This paper aims to maximize optical force and torque on arbitrary micro- and nano-scale objects using numerically optimized structured illumination. By developing a numerical framework for computer-automated design of 3d vector-field illumination, we demonstrate a 20-fold enhancement in optical torque per intensity over circularly polarized plane wave on a model plasmonic particle. The nonconvex o… ▽ More This paper aims to maximize optical force and torque on arbitrary micro- and nano-scale objects using numerically optimized structured illumination. By developing a numerical framework for computer-automated design of 3d vector-field illumination, we demonstrate a 20-fold enhancement in optical torque per intensity over circularly polarized plane wave on a model plasmonic particle. The nonconvex optimization is efficiently performed by combining a compact cylindrical Bessel basis representation with a fast boundary element method and a standard derivative-free, local optimization algorithm. We analyze the optimization results for 2000 random initial configurations, discuss the tradeoff between robustness and enhancement, and compare the different effects of multipolar plasmon resonances on enhancing force and torque. All results are obtained using open-source computational software available online. △ Less

Submitted 26 January, 2017; originally announced January 2017.

Comments: 12 pages, 6 figures

Polaritons in layered 2D materials

Authors: Tony Low, Andrey Chaves, Joshua D. Caldwell, Anshuman Kumar, Nicholas X. Fang, Phaedon Avouris, Tony F. Heinz, Francisco Guinea, Luis Martin-Moreno, Frank Koppens

Abstract: In recent years, enhanced light-matter interactions through a plethora of dipole-type polaritonic excitations have been observed in two-dimensional (2D) layered materials. In graphene, electrically tunable and highly confined plasmon-polaritons were predicted and observed, opening up opportunities for optoelectronics, bio-sensing and other mid-infrared applications. In hexagonal boron nitride (hBN… ▽ More In recent years, enhanced light-matter interactions through a plethora of dipole-type polaritonic excitations have been observed in two-dimensional (2D) layered materials. In graphene, electrically tunable and highly confined plasmon-polaritons were predicted and observed, opening up opportunities for optoelectronics, bio-sensing and other mid-infrared applications. In hexagonal boron nitride (hBN), low-loss infrared-active phonon-polaritons exhibit hyperbolic behavior for some frequencies, allowing for ray-like propagation exhibiting high quality factors and hyperlensing effects. In transition metal dichalcogenides (TMDs), reduced screening in the 2D limit leads to optically prominent excitons with large binding energy, with these polaritonic modes having been recently observed with scanning near field optical microscopy (SNOM). Here, we review recent progress in state-of-the-art experiments, survey the vast library of polaritonic modes in 2D materials, their optical spectral properties, figures-of-merit and application space. Taken together, the emerging field of 2D material polaritonics and their hybrids provide enticing avenues for manipulating light-matter interactions across the visible, infrared to terahertz spectral ranges, with new optical control beyond what can be achieved using traditional bulk materials. △ Less

Submitted 7 July, 2017; v1 submitted 14 October, 2016; originally announced October 2016.

Journal ref: Nature Materials 16, 182--194 (2017)

Ultrafast fluorescent decay induced by metal-mediated dipole-dipole interaction in two-dimensional molecular aggregates

Authors: Qing Hu, Dafei Jin, Sang Hoon Nam, Jun Xiao, Yongmin Liu, Xiang Zhang, Nicholas X. Fang

Abstract: Two-dimensional molecular aggregate (2DMA), a thin sheet of strongly interacting dipole molecules self-assembled at close distance on an ordered lattice, is a fascinating fluorescent material. It is distinctively different from the single or colloidal dye molecules or quantum dots in most previous research. In this paper, we verify for the first time that when a 2DMA is placed at a nanometric dist… ▽ More Two-dimensional molecular aggregate (2DMA), a thin sheet of strongly interacting dipole molecules self-assembled at close distance on an ordered lattice, is a fascinating fluorescent material. It is distinctively different from the single or colloidal dye molecules or quantum dots in most previous research. In this paper, we verify for the first time that when a 2DMA is placed at a nanometric distance from a metallic substrate, the strong and coherent interaction between the dipoles inside the 2DMA dominates its fluorescent decay at picosecond timescale. Our streak-camera lifetime measurement and interacting lattice-dipole calculation reveal that the metal-mediated dipole-dipole interaction shortens the fluorescent lifetime to about one half and increases the energy dissipation rate by ten times than expected from the noninteracting single-dipole picture. Our finding can enrich our understanding of nanoscale energy transfer in molecular excitonic systems and may designate a new direction for developing fast and efficient optoelectronic devices. △ Less

Submitted 10 May, 2016; v1 submitted 27 March, 2016; originally announced March 2016.

Comments: 9 pages, 6 figures

Topological magnetoplasmon

Authors: Dafei Jin, Ling Lu, Zhong Wang, Chen Fang, John D. Joannopoulos, Marin Soljačić, Liang Fu, Nicholas X. Fang

Abstract: Classical wave fields are real-valued, ensuring the wave states at opposite frequencies and momenta to be inherently identical. Such a particle-hole symmetry can open up new possibilities for topological phenomena in classical systems. Here we show that the historically studied two-dimensional (2D) magnetoplasmon, which bears gapped bulk states and gapless one-way edge states near zero frequency,… ▽ More Classical wave fields are real-valued, ensuring the wave states at opposite frequencies and momenta to be inherently identical. Such a particle-hole symmetry can open up new possibilities for topological phenomena in classical systems. Here we show that the historically studied two-dimensional (2D) magnetoplasmon, which bears gapped bulk states and gapless one-way edge states near zero frequency, is topologically analogous to the 2D topological $p+\Ii p$ superconductor with chiral Majorana edge states and zero modes. We further predict a new type of one-way edge magnetoplasmon at the interface of opposite magnetic domains, and demonstrate the existence of zero-frequency modes bounded at the peripheries of a hollow disk. These findings can be readily verified in experiment, and can greatly enrich the topological phases in bosonic and classical systems. △ Less

Submitted 7 December, 2016; v1 submitted 1 February, 2016; originally announced February 2016.

Comments: 12 pages, 6 figures, 1 supporting material

Journal ref: Nat. Commun. 7, 13486 (2016)

Chiral plasmon in gapped Dirac systems

Authors: Anshuman Kumar, Andrei Nemilentsau, Kin Hung Fung, George Hanson, Nicholas X. Fang, Tony Low

Abstract: We study the electromagnetic response and surface electromagnetic modes in a generic gapped Dirac material under pumping with circularly polarized light. The valley imbalance due to pumping leads to a net Berry curvature, giving rise to a finite transverse conductivity. We discuss the appearance of nonreciprocal chiral edge modes, their hybridization and waveguiding in a nanoribbon geometry, and g… ▽ More We study the electromagnetic response and surface electromagnetic modes in a generic gapped Dirac material under pumping with circularly polarized light. The valley imbalance due to pumping leads to a net Berry curvature, giving rise to a finite transverse conductivity. We discuss the appearance of nonreciprocal chiral edge modes, their hybridization and waveguiding in a nanoribbon geometry, and giant polarization rotation in nanoribbon arrays. △ Less

Submitted 28 December, 2015; v1 submitted 2 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. B 93, 041413(R) (2016)

Quantum-Spillover-Enhanced Surface-Plasmonic Absorption at the Interface of Silver and High-Index Dielectrics

Authors: Dafei Jin, Qing Hu, Daniel Neuhauser, Felix von Cube, Yingyi Yang, Ritesh Sachan, Ting S. Luk, David C. Bell, Nicholas X. Fang

Abstract: We demonstrate an unexpectedly strong surface-plasmonic absorption at the interface of silver and high-index dielectrics based on electron and photon spectroscopy. The measured bandwidth and intensity of absorption deviate significantly from the classical theory. Our density-functional calculation well predicts the occurrence of this phenomenon. It reveals that due to the low metal-to-dielectric w… ▽ More We demonstrate an unexpectedly strong surface-plasmonic absorption at the interface of silver and high-index dielectrics based on electron and photon spectroscopy. The measured bandwidth and intensity of absorption deviate significantly from the classical theory. Our density-functional calculation well predicts the occurrence of this phenomenon. It reveals that due to the low metal-to-dielectric work function at such interfaces, conduction electrons can display a drastic quantum spillover, causing the interfacial electron-hole pair production to dominate the decay of surface plasmons. This finding can be of fundamental importance in understanding and designing quantum nano-plasmonic devices that utilize noble metals and high-index dielectrics. △ Less

Submitted 29 October, 2015; v1 submitted 29 April, 2015; originally announced April 2015.

Comments: 5 pages, 5 figures

Nonlocal description of sound propagation through an array of Helmholtz resonators

Authors: Navid Nemati, Anshuman Kumar, Denis Lafarge, Nicholas X. Fang

Abstract: A generalized macroscopic nonlocal theory of sound propagation in rigid-framed porous media saturated with a viscothermal fluid has been recently proposed, which takes into account both temporal and spatial dispersion. Here, we consider applying this theory capable to describe resonance effects, to the case of sound propagation through an array of Helmholtz resonators whose unusual metamaterial pr… ▽ More A generalized macroscopic nonlocal theory of sound propagation in rigid-framed porous media saturated with a viscothermal fluid has been recently proposed, which takes into account both temporal and spatial dispersion. Here, we consider applying this theory capable to describe resonance effects, to the case of sound propagation through an array of Helmholtz resonators whose unusual metamaterial properties such as negative bulk moduli, have been experimentally demonstrated. Three different calculations are performed, validating the results of the nonlocal theory, relating to the frequency-dependent Bloch wavenumber and bulk modulus of the first normal mode, for 1D propagation in 2D or 3D periodic structures. △ Less

Submitted 17 March, 2015; originally announced March 2015.

Comments: 19 pages

Tunable light-matter interaction and the role of hyperbolicity in graphene-hBN system

Authors: Anshuman Kumar, Tony Low, Kin Hung Fung, Phaedon Avouris, Nicholas X. Fang

Abstract: Hexagonal boron nitride (hBN) is a natural hyperbolic material which can also accommodate highly dispersive surface phonon-polariton modes. In this paper, we examine theoretically the mid-infrared optical properties of graphene-hBN heterostructures derived from their coupled plasmon-phonon modes. We found that the graphene plasmon couples differently with the phonons of the two Reststrahlen bands,… ▽ More Hexagonal boron nitride (hBN) is a natural hyperbolic material which can also accommodate highly dispersive surface phonon-polariton modes. In this paper, we examine theoretically the mid-infrared optical properties of graphene-hBN heterostructures derived from their coupled plasmon-phonon modes. We found that the graphene plasmon couples differently with the phonons of the two Reststrahlen bands, owing to their different hyperbolicity. This also leads to distinctively different interaction between an external quantum emitter and the plasmon-phonon modes in the two bands, leading to substantial modification of its spectrum. The coupling to graphene plasmons allows for additional gate tunability in the Purcell factor, and narrow dips in its emission spectra. △ Less

Submitted 16 February, 2015; originally announced February 2015.

Journal ref: Nano Lett., 2015, 15 (5), pp 3172-3180

Near-field Holographic Retrieval of an Isolated Subwavelength Hole in a Thin Metallic Film

Authors: Jun Xu, Hyungjin Ma, Nicholas X. Fang

Abstract: Using a holographic approach, we experimentally study the near-field intensity distribution of light squeezed through an isolated subwavelength plasmonic hole in a thin metallic film. Our experiments revealed an in-plane electric dipole moment excited near the isolated hole. By analyzing the fringe patterns formed between the in-plane dipole and plane wave illumination, both the transmission coeff… ▽ More Using a holographic approach, we experimentally study the near-field intensity distribution of light squeezed through an isolated subwavelength plasmonic hole in a thin metallic film. Our experiments revealed an in-plane electric dipole moment excited near the isolated hole. By analyzing the fringe patterns formed between the in-plane dipole and plane wave illumination, both the transmission coefficient and phase shift of the dipole can be retrieved. We also observed opposite phases of the excited dipoles from the subwavelength dent and protrusion in the metallic film, in good agreement with the prediction from our model. Our approach can be used to study the microscopic process of the light-structure interaction for the plasmonic and nanophotonic systems with potential applications in high density optical data storages. △ Less

Submitted 1 April, 2014; originally announced April 2014.

Comments: 9 pages and 9 figures

Position-sensitive spectral splitting with a plasmonic nanowire on silicon chip

Authors: Qing Hu, Di-Hu Xu, Yu Zhou, Ru-Wen Peng, Ren-Hao Fan, Nicholas X. Fang, Qian-Jin Wang, Xian-Rong uang, Mu Wang

Abstract: On-chip nanophotonics serves as the foundation for the new generation of information technology, but it is challenged by the diffraction limit of light. With the capabilities of confining light into (deep) subwavelength volumes, plasmonics makes it possible to dramatically miniaturize optical devices so as to integrate them into silicon chips. Here we demonstrate that by cascading nano-corrugation… ▽ More On-chip nanophotonics serves as the foundation for the new generation of information technology, but it is challenged by the diffraction limit of light. With the capabilities of confining light into (deep) subwavelength volumes, plasmonics makes it possible to dramatically miniaturize optical devices so as to integrate them into silicon chips. Here we demonstrate that by cascading nano-corrugation gratings with different periodicities on silver nanowires atop silicon, different colors can be spatially separated and chronologically released at different grating junctions. The released light frequency depends on the grating arrangement and corrugation periodicities. Hence the nanowire acts as a spectral splitter for sorting/demultiplexing photons at different nano-scale positions with a ten-femtosecond-level interval. Such nanowires can be constructed further into compact 2D networks or circuits. We believe that this study provides a new and promising approach for realizing spatiotemporal-sensitive spectral splitting and optical signal processing on nanoscales, and for general integration of nanophotonics with microelectronics. △ Less

Submitted 4 November, 2013; originally announced November 2013.

Journal ref: Sci. Rep. 3, 3095 (2013)

Efficient multiband absorber based on 1D periodic metal-dielectric photonic crystals with a reflective substrate

Authors: Yanxia Cui, Wenyan Wang, Yingran He, Yuying Hao, Yinyue Lin, Ximin Tian, Ju Xu, Ting Ji, Sailing He, Nicholas X. Fang

Abstract: We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized wit… ▽ More We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized with efficiencies higher than 95%. Moreover, those absorption peaks are insensitive to both polarization and incident angle. The influences of the geometrical parameters along with the refractive index of the dielectric on the device performance are discussed as well. Furthermore, it is found that the number of absorption peaks within each photonic band exactly corresponds to the number of the unit cells because the truncated photonic crystal lattices have the function of selecting resonant modes. It is also displayed that the total absorption efficiency gradually increases when there are more metal-dielectric unit cells placing on top of the metallic substrate. Our work is expected to have some potential applications in the areas of solar energy harvesting and thermal emission tailoring. △ Less

Submitted 14 October, 2013; v1 submitted 13 October, 2013; originally announced October 2013.

Comments: This paper has been withdrawn by the author because one of the authors would like his name being only acknowledged

Plasmonic angular momentum on metal-dielectric nano-wedges in a sectorial indefinite metamaterial

Authors: Dafei Jin, Nicholas X. Fang

Abstract: We present an analytical study to the structure-modulated plasmonic angular momentum trapped on periodic metal-dielectric nano-wedges in the core region of a sectorial indefinite metamaterial. Employing a transfer-matrix calculation and a conformal-mapping technique, our theory is capable of dealing with realistic configurations of arbitrary sector numbers and rounded wedge tips. We demonstrate th… ▽ More We present an analytical study to the structure-modulated plasmonic angular momentum trapped on periodic metal-dielectric nano-wedges in the core region of a sectorial indefinite metamaterial. Employing a transfer-matrix calculation and a conformal-mapping technique, our theory is capable of dealing with realistic configurations of arbitrary sector numbers and rounded wedge tips. We demonstrate that in the deep-subwavelength regime strong electric field carrying high azimuthal variation can exist within only ten-nanometer length scale close to the structural center, and is naturally bounded by a characteristic radius of the order of hundred-nanometer away from the center. These extreme confining properties suggest that the structure under investigation may be superior to the conventional metal-dielectric waveguides or cavities in terms of nanoscale photonic manipulation. △ Less

Submitted 18 September, 2013; originally announced September 2013.

Comments: 16 pages, 9 figures

Photon Emission Rate Engineering using Graphene Nanodisc Cavities

Authors: Anshuman Kumar, Kin Hung Fung, M. T. Homer Reid, Nicholas X. Fang

Abstract: In this work, we present a systematic study of the plasmon modes in a system of vertically stacked pair of graphene discs. Quasistatic approximation is used to model the eigenmodes of the system. Eigen-response theory is employed to explain the spatial dependence of the coupling between the plasmon modes and a quantum emitter. These results show a good match between the semi-analytical calculation… ▽ More In this work, we present a systematic study of the plasmon modes in a system of vertically stacked pair of graphene discs. Quasistatic approximation is used to model the eigenmodes of the system. Eigen-response theory is employed to explain the spatial dependence of the coupling between the plasmon modes and a quantum emitter. These results show a good match between the semi-analytical calculation and full-wave simulations. Secondly, we have shown that it is possible to engineer the decay rates of a quantum emitter placed inside and near this cavity, using Fermi level tuning, via gate voltages and variation of emitter location and polarization. We highlighted that by coupling to the bright plasmon mode, the radiative efficiency of the emitter can be enhanced compared to the single graphene disc case, whereas the dark plasmon mode suppresses the radiative efficiency. △ Less

Submitted 3 March, 2014; v1 submitted 9 September, 2013; originally announced September 2013.

Journal ref: Optics Express, Vol. 22, Issue 6, pp. 6400-6415, 2014

Ferroelectric-Gated Terahertz Plasmonics on Graphene

Authors: Dafei Jin, Anshuman Kumar, Kin Hung Fung, Jun Xu, Nicholas X. Fang

Abstract: Inspired by recent advancement of low-power ferroelectic-gated memories and transistors, we propose a design of ferroelectic-gated nanoplasmonic devices based on graphene sheets clamped in ferroelectric crystals. We show that the two-dimensional plasmons in graphene strongly couple with the phonon-polaritons in ferroelectrics at terahertz frequencies, leading to characteristic modal wavelength of… ▽ More Inspired by recent advancement of low-power ferroelectic-gated memories and transistors, we propose a design of ferroelectic-gated nanoplasmonic devices based on graphene sheets clamped in ferroelectric crystals. We show that the two-dimensional plasmons in graphene strongly couple with the phonon-polaritons in ferroelectrics at terahertz frequencies, leading to characteristic modal wavelength of the order of 100--200 nm at only 3--4 THz. By patterning the ferroelectrics into different domains, one can produce compact on-chip plasmonic waveguides, which exhibit negligible crosstalk even at 50 nm separation distance. Harnessing the memory effect of ferroelectrics, low-power electro-optical switching can be achieved on these plasmonic waveguides. △ Less

Submitted 22 January, 2013; originally announced January 2013.

Comments: 4 figures

Optical Curtain Effect: Extraordinary Optical Transmission Enhanced by Antireflection

Authors: Yanxia Cui, Jun Xu, Yinyue Lin, Guohui Li, Yuying Hao, Sailing He, Nicholas X. Fang

Abstract: In this paper, we employ an antireflective coating which comprises of inverted pi shaped metallic grooves to manipulate the behaviour of a TM-polarized plane wave transmitted through a periodic nanoslit array. At normal incidence, such scheme can not only retain the optical curtain effect in the output region, but also generate the extraordinary transmission of light through the nanoslits with the… ▽ More In this paper, we employ an antireflective coating which comprises of inverted pi shaped metallic grooves to manipulate the behaviour of a TM-polarized plane wave transmitted through a periodic nanoslit array. At normal incidence, such scheme can not only retain the optical curtain effect in the output region, but also generate the extraordinary transmission of light through the nanoslits with the total transmission efficiency as high as 90%. Besides, we show that the spatially invariant field distribution in the output region as well as the field distribution of resonant modes around the inverted pi shaped grooves can be reproduced immaculately when the system is excited by an array of point sources beneath the inverted pi shaped grooves. In further, we investigate the influence of center-groove and side-corners of the inverted pi shaped grooves on suppressing the reflection of light, respectively. Based on our work, it shows promising potential in applications of enhancing the extraction efficiency as well as controlling the beaming pattern of light emitting diodes. △ Less

Submitted 13 October, 2012; originally announced October 2012.

Comments: 20 pages, 5 figures

Prescribed pattern transformation in swelling gel tubes by elastic instability

Authors: Howon Lee, Jiaping Zhang, Hanqing Jiang, Nicholas X. Fang

Abstract: We present a study on swelling-induced circumferential buckling of tubular shaped gels. Inhomogeneous stress develops as gel swells under mechanical constraints, which gives rise to spontaneous buckling instability without external force. Full control over the post-buckling pattern is experimentally demonstrated. A simple analytical model is developed using elastic energy to predict stability and… ▽ More We present a study on swelling-induced circumferential buckling of tubular shaped gels. Inhomogeneous stress develops as gel swells under mechanical constraints, which gives rise to spontaneous buckling instability without external force. Full control over the post-buckling pattern is experimentally demonstrated. A simple analytical model is developed using elastic energy to predict stability and post-buckling patterns upon swelling. Analysis reveals that height to diameter ratio is the most critical design parameter to determine buckling pattern, which agrees well with experimental and numerical results. △ Less

Submitted 12 April, 2012; originally announced April 2012.

Comments: 32 pages, 7 figures

Electron-photon scattering mediated by localized plasmons: A quantitative analysis by eigen-response theory

Authors: Kin Hung Fung, Anil Kumar, Nicholas X. Fang

Abstract: We show that the scattering interaction between a high energy electron and a photon can be strongly enhanced by different types of localized plasmons in a non-trivial way. The scattering interaction is predicted by an eigen-response theory, numerically verified by finite-difference-time-domain simulation, and experimentally verified by cathodoluminescence spectroscopy. We find that the scattering… ▽ More We show that the scattering interaction between a high energy electron and a photon can be strongly enhanced by different types of localized plasmons in a non-trivial way. The scattering interaction is predicted by an eigen-response theory, numerically verified by finite-difference-time-domain simulation, and experimentally verified by cathodoluminescence spectroscopy. We find that the scattering interaction associated with dark plasmons can be as strong as that of bright plasmons. Such a strong interaction may offer new opportunities to improve single-plasmon detection and high-resolution characterization techniques for high quality plasmonic materials. △ Less

Submitted 15 January, 2013; v1 submitted 18 January, 2012; originally announced January 2012.

Comments: 4 pages, 4 figures (excluding Supporting Information)

Journal ref: Phys. Rev. B 89, 045408 (2014)

Ultra-broadband Light Absorption by a Sawtooth Anisotropic Metamaterial Slab

Authors: Yanxia Cui, Kin Hung Fung, Jun Xu, Hyungjin Ma, Yi Jin, Sailing He, Nicholas X. Fang

Abstract: We present an ultra broadband thin-film infrared absorber made of saw-toothed anisotropic metamaterial. Absorbtivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of… ▽ More We present an ultra broadband thin-film infrared absorber made of saw-toothed anisotropic metamaterial. Absorbtivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of the sawteeth of smaller widths, while light of longer wavelengths are trapped at lower parts of larger tooth widths. This phenomenon is explained by the slowlight modes in anisotropic metamaterial waveguide. Our study can be applied in the field of designing photovoltaic devices and thermal emitters. △ Less

Submitted 22 November, 2011; originally announced November 2011.

Comments: 12 pages, 4 pictures

A Thin Film Broadband Absorber Based on Multi-sized Nanoantennas

Authors: Yanxia Cui, Jun Xu, Kin Hung Fung, Yi Jin, Anil Kumar, Sailing He, Nicholas X. Fang

Abstract: We experimentally demonstrate an infrared broadband absorber for TM polarized light based on an array of nanostrip antennas of several different sizes. The broadband property is due to the collective effect of magnetic responses excited by these nano-antennas at distinct wavelengths. By manipulating the differences of the nanostrip widths, the measured spectra clearly validate our design for the p… ▽ More We experimentally demonstrate an infrared broadband absorber for TM polarized light based on an array of nanostrip antennas of several different sizes. The broadband property is due to the collective effect of magnetic responses excited by these nano-antennas at distinct wavelengths. By manipulating the differences of the nanostrip widths, the measured spectra clearly validate our design for the purpose of broadening the absorption band. The present broadband absorber works very well in a wide angular range. △ Less

Submitted 1 August, 2011; originally announced August 2011.

Comments: 3 pages, 4 figures

Zeeman Splitting of Photonic Angular Momentum States in Gyromagnetic Cylinder

Authors: Kin Hung Fung, Jin Wang, Hui Yuan Dong, Nicholas X. Fang

Abstract: We show that under the presence of a static magnetic field the photon eigen-frequencies of a circular gyromagnetic cylinder experience a splitting that is proportional to the angular momentum density of light at the cylinder surface. Such a splitting of the photonic states is similar to the Zeeman splitting of electronic states in atoms. This leads to some unusual decoupling properties of these no… ▽ More We show that under the presence of a static magnetic field the photon eigen-frequencies of a circular gyromagnetic cylinder experience a splitting that is proportional to the angular momentum density of light at the cylinder surface. Such a splitting of the photonic states is similar to the Zeeman splitting of electronic states in atoms. This leads to some unusual decoupling properties of these non-degenerate photonic angular momentum states, which are demonstrated through numerical simulations. △ Less

Submitted 1 November, 2011; v1 submitted 31 July, 2011; originally announced August 2011.

Comments: 4 pages, 4 figures (with a 4-page supplementary material)

Journal ref: Phys. Rev. B 84, 235122 (2011)

Direct metal nano-imprinting using embossed solid electrolyte stamp

Authors: A Kumar, K H Hsu, K E Jacobs, P M Ferreira, N X Fang

Abstract: In this paper, we report direct patterning of metal nanostructures using an embossed solid electrochemical stamp. Microforming of solid superionic stamps using Si templates-analogous to polymer patterning in nano-imprint lithography-is explored. Silver sulfide (Ag2S)-a superionic conductor with excellent micro-forming properties-is investigated as a candidate material. Important parameters of the… ▽ More In this paper, we report direct patterning of metal nanostructures using an embossed solid electrochemical stamp. Microforming of solid superionic stamps using Si templates-analogous to polymer patterning in nano-imprint lithography-is explored. Silver sulfide (Ag2S)-a superionic conductor with excellent micro-forming properties-is investigated as a candidate material. Important parameters of the superionic stamp, including mechanical behavior, material flow during forming, and feature recovery after embossing are studied. Excellent feature transferability during embossing as well as etching is observed. To illustrate the capability of this approach silver nano-antennas with gaps <10 nm were successfully fabricated. The possibility for large area patterning with stamp diameters >6 mm is also demonstrated. Embossing based metal patterning allows fabrication beyond two-dimensional nanofabrication and several patterning schemes are reported. △ Less

Submitted 9 February, 2011; originally announced February 2011.

Comments: 11 pages (double spaced), 7 figures, 1 table, continuation of work submitted to MRS Spring 2009

Excitation and Imaging of Resonant Optical Modes of Au Triangular Nano-Antennas Using Cathodoluminescence Spectroscopy

Authors: Anil Kumar, Kin-Hung Fung, James C. Mabon, Edmond Chow, Nicholas X. Fang

Abstract: Cathodoluminescence (CL) imaging spectroscopy is an important technique to understand resonant behavior of optical nanoantennas. We report high-resolution CL spectroscopy of triangular gold nanoantennas designed with near-vacuum effective index and very small metal-substrate interface. This design helped in addressing issues related to background luminescence and shifting of dipole modes beyond vi… ▽ More Cathodoluminescence (CL) imaging spectroscopy is an important technique to understand resonant behavior of optical nanoantennas. We report high-resolution CL spectroscopy of triangular gold nanoantennas designed with near-vacuum effective index and very small metal-substrate interface. This design helped in addressing issues related to background luminescence and shifting of dipole modes beyond visible spectrum. Spatial and spectral investigations of various plasmonic modes are reported. Out-of-plane dipole modes excited with vertically illuminated electron beam showed high-contrast tip illumination in panchromatic imaging. By tilting the nanostructures during fabrication, in-plane dipole modes of antennas were excited. Finite-difference time-domain simulations for electron and optical excitations of different modes showed excellent agreement with experimental results. Our approach of efficiently exciting antenna modes by using low index substrates is confirmed both with experiments and numerical simulations. This should provide further insights into better understanding of optical antennas for various applications. △ Less

Submitted 30 September, 2010; originally announced October 2010.

Comments: To be published in JVST B (accepted, Sep 2010) (15 pages, 6 figures, originally presented at EIPBN 2010)

First Jump of Microgel: Actuation Speed Enhancement by Elastic Instability

Authors: Howon Lee, Chunguang Xia, Nicholas X. Fang

Abstract: Swelling-induced snap-buckling in a 3D micro hydrogel device, inspired by the insect-trapping action of Venus flytrap, makes it possible to generate astonishingly fast actuation. We demonstrate that elastic energy is effectively stored and quickly released from the device by incorporating elastic instability. Utilizing its rapid actuation speed, the device can even jump by itself upon wetting. Swelling-induced snap-buckling in a 3D micro hydrogel device, inspired by the insect-trapping action of Venus flytrap, makes it possible to generate astonishingly fast actuation. We demonstrate that elastic energy is effectively stored and quickly released from the device by incorporating elastic instability. Utilizing its rapid actuation speed, the device can even jump by itself upon wetting. △ Less

Submitted 24 August, 2010; originally announced August 2010.

Comments: 4 pages, 3 figures

Journal ref: published in Soft Matter, 2010

Thin Film Absorbers Based on Plasmonic Phase Resonances

Authors: Yanxia Cui, Kin Hung Fung, Jun Xu, Sailing He, Nicholas X. Fang

Abstract: We demonstrate an efficient double-layer light absorber by exciting plasmonic phase resonances. We show that the addition of grooves can cause mode splitting of the plasmonic waveguide cavity modes and all the new resonant modes exhibit large absorptivity greater than 90%. Some of the generated absorption peaks have wide-angle characteristics. Furthermore, we find that the proposed structure is fa… ▽ More We demonstrate an efficient double-layer light absorber by exciting plasmonic phase resonances. We show that the addition of grooves can cause mode splitting of the plasmonic waveguide cavity modes and all the new resonant modes exhibit large absorptivity greater than 90%. Some of the generated absorption peaks have wide-angle characteristics. Furthermore, we find that the proposed structure is fairly insensitive to the alignment error between different layers. The proposed plasmonic nano-structure designs may have exciting potential applications in thin film solar cells, thermal emitters, novel infrared detectors, and highly sensitive bio-sensors. △ Less

Submitted 28 July, 2010; originally announced July 2010.

Comments: 16 pages, 4 figures

Plasmon Assisted Optical Curtains

Authors: Yanxia Cui, Jun Xu, Sailing He, Nicholas X. Fang

Abstract: We predict an optical curtain effect, i.e., formation of a spatially invariant light field as light emerges from a set of periodic metallic nano-objects. The underlying physical mechanism of generation of this unique optical curtain can be explained in both the spatial domain and the wave-vector domain. In particular, in each period we use one metallic nanostrip to equate the amplitudes of lights… ▽ More We predict an optical curtain effect, i.e., formation of a spatially invariant light field as light emerges from a set of periodic metallic nano-objects. The underlying physical mechanism of generation of this unique optical curtain can be explained in both the spatial domain and the wave-vector domain. In particular, in each period we use one metallic nanostrip to equate the amplitudes of lights impinging on the openings of two metallic nanoslits and also shift their phases by pi difference. We elaborate the influence on the output effect from some geometrical parameters like the periodicity, the slit height and so on. By controlling the light illuminated on metallic subwavelength apertures, it is practical to generate optical curtains of arbitrary forms, which may open new routes of plasmonic nano-lithography. △ Less

Submitted 29 March, 2010; originally announced May 2010.

Comments: 13 pages, 5 figures

Enhanced Surface Photon Drag on Plasmonic Metamaterials: A Fizeau-Doppler Shift Study

Authors: Leilei Yin, Nicholas X. Fang

Abstract: In this work, we numerically study the Fizeau-Doppler shift of surface modes in a moving plasmonic metamaterial. At proper surface plasmon resonance conditions, a slow group velocity is resulted in the metamaterials, and our simulation indicates a phase shift up to 4 orders of magnitude larger than the normal mode. In addition, both appreciable positive and negative photon drag could be observed… ▽ More In this work, we numerically study the Fizeau-Doppler shift of surface modes in a moving plasmonic metamaterial. At proper surface plasmon resonance conditions, a slow group velocity is resulted in the metamaterials, and our simulation indicates a phase shift up to 4 orders of magnitude larger than the normal mode. In addition, both appreciable positive and negative photon drag could be observed. We also found an abrupt transition in the sign of phase shift when silver film reaches a critical thickness. This opens new opportunities in applications such as compact optical gyroscopes and accelerometers. △ Less

Submitted 9 July, 2009; originally announced July 2009.

Comments: submitted to Applied Physics Letters