-
Experimentally Realizing Convolution Processing in the Photonic Synthetic Frequency Dimension
Authors:
Lingling Fan,
Kai Wang,
Heming Wang,
Avik Dutt,
Shanhui Fan
Abstract:
Convolution is an essential operation in signal and image processing and consumes most of the computing power in convolutional neural networks. Photonic convolution has the promise of addressing computational bottlenecks and outperforming electronic implementations. Performing photonic convolution in the synthetic frequency dimension, which harnesses the dynamics of light in the spectral degrees o…
▽ More
Convolution is an essential operation in signal and image processing and consumes most of the computing power in convolutional neural networks. Photonic convolution has the promise of addressing computational bottlenecks and outperforming electronic implementations. Performing photonic convolution in the synthetic frequency dimension, which harnesses the dynamics of light in the spectral degrees of freedom for photons, can lead to highly compact devices. Here we experimentally realize convolution operations in the synthetic frequency dimension. Using a modulated ring resonator, we synthesize arbitrary convolution kernels using a pre-determined modulation waveform with high accuracy. We demonstrate the convolution computation between input frequency combs and synthesized kernels. We also introduce the idea of an additive offset to broaden the kinds of kernels that can be implemented experimentally when the modulation strength is limited. Our work demonstrate the use of synthetic frequency dimension to efficiently encode data and implement computation tasks, leading to a compact and scalable photonic computation architecture.
△ Less
Submitted 11 August, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser
Authors:
A. X. Li,
C. Y. Qin,
H. Zhang,
S. Li,
L. L. Fan,
Q. S. Wang,
T. J. Xu,
N. W. Wang,
L. H. Yu,
Y. Xu,
Y. Q. Liu,
C. Wang,
X. L. Wang,
Z. X. Zhang,
X. Y. Liu,
P. L. Bai,
Z. B. Gan,
X. B. Zhang,
X. B. Wang,
C. Fan,
Y. J. Sun,
Y. H. Tang,
B. Yao,
X. Y. Liang,
Y. X. Leng
, et al. (3 additional authors not shown)
Abstract:
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 1…
▽ More
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Highly Distorted Lattices in Chemically Complex Alloys Produce Ultra-Elastic Materials with Extraordinary Elinvar Effects
Authors:
Q. F. He,
J. G. Wang,
H. A. Chen,
Z. Y. Ding,
Z. Q. Zhou,
L. H. Xiong,
J. H. Luan,
J. M. Pelletier,
J. C. Qiao,
Q. Wang,
L. L. Fan,
Y. Ren,
Q. S. Zeng,
C. T. Liu,
C. W. Pao,
D. J. Srolovitz,
Y. Yang
Abstract:
Conventional crystalline alloys usually possess a low atomic size difference in order to stabilize its crystalline structure. However, in this article, we report a single phase chemically complex alloy which possesses a large atomic size misfit usually unaffordable to conventional alloys. Consequently, this alloy develops a rather complex atomic-scale chemical order and a highly distorted crystall…
▽ More
Conventional crystalline alloys usually possess a low atomic size difference in order to stabilize its crystalline structure. However, in this article, we report a single phase chemically complex alloy which possesses a large atomic size misfit usually unaffordable to conventional alloys. Consequently, this alloy develops a rather complex atomic-scale chemical order and a highly distorted crystalline structure. As a result, this crystalline alloy displays an unusually high elastic strain limit (~2%), about ten times of that of conventional alloys, and an extremely low internal friction (< 2E-4) at room temperature. More interestingly, this alloy firmly maintains its elastic modulus even when the testing temperature rises from room temperature to 900 K, which is unmatched by the existing alloys hitherto reported. From an application viewpoint, our discovery may open up new opportunities to design high precision devices usable even under an extreme environment.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Maximal nighttime electrical power generation via optimal radiative cooling
Authors:
Lingling Fan,
Wei Li,
Weiliang Jin,
Meir Orenstein,
Shanhui Fan
Abstract:
We present a systematic optimization of nighttime thermoelectric power generation system utilizing radiative cooling. We show that an electrical power density over 2 W/m2, two orders of magnitude higher than the previously reported experimental result, is achievable using existing technologies. This system combines radiative cooling and thermoelectric power generation and operates at night when so…
▽ More
We present a systematic optimization of nighttime thermoelectric power generation system utilizing radiative cooling. We show that an electrical power density over 2 W/m2, two orders of magnitude higher than the previously reported experimental result, is achievable using existing technologies. This system combines radiative cooling and thermoelectric power generation and operates at night when solar energy harvesting is unavailable. The thermoelectric power generator (TEG) itself covers less than 1 percent of the system footprint area when achieving this optimal power generation, showing economic feasibility. We study the influence of emissivity spectra, thermal convection, thermoelectric figure of merit and the area ratio between the TEG and the radiative cooler on the power generation performance. We optimize the thermal radiation emitter attached to the cold side and propose practical material implementation. The importance of the optimal emitter is elucidated by the gain of 153% in power density compared to regular blackbody emitters.
△ Less
Submitted 10 August, 2020;
originally announced August 2020.
-
Nonreciprocal radiative heat transfer between two planar bodies
Authors:
Lingling Fan,
Yu Guo,
Georgia T. Papadakis,
Bo Zhao,
Zhexin Zhao,
Siddharth Buddhiraju,
Meir Orenstein,
Shanhui Fan
Abstract:
We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermod…
▽ More
We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermodynamics. We numerically demonstrate our findings in an example system consisting of magneto-optical materials. Our formalism applies to both near- and far-field regimes, opening opportunities for exploiting nonreciprocity in two-body radiative heat transfer systems.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Investigating on the nuclear obscuration in two types of Seyfert 2 galaxies
Authors:
X. W. Shu,
J. X. Wang,
P. Jiang,
L. L. Fan,
T. G. Wang
Abstract:
We build a large sample of Seyfert 2 galaxies (Sy2s) with both optical spectropolarimetric and X-ray data available, in which 29 Sy2s with the detection of polarized broad emission line (PBL) and 25 without. We find that for luminous Sy2s with L_[OIII] > 10^41 erg/s, sources with PBL have smaller X-ray absorption column density comparing with those without PBL (at 92.3% confidence level): most o…
▽ More
We build a large sample of Seyfert 2 galaxies (Sy2s) with both optical spectropolarimetric and X-ray data available, in which 29 Sy2s with the detection of polarized broad emission line (PBL) and 25 without. We find that for luminous Sy2s with L_[OIII] > 10^41 erg/s, sources with PBL have smaller X-ray absorption column density comparing with those without PBL (at 92.3% confidence level): most of the Sy2s with N_H<10^23.8 cm^-2 show PBL (86%, 12 out 14), while the fraction is much smaller for sources with heavier obscuration (54%, 15 out 28). The confidence level of the difference in absorption bounces up to 99.1% while using the "T" ratio (F_2-10keV/F_[O III]) as an indicator. We rule out observation or selection bias as the origin for the difference. Our results, for the first time with high statistical confidence, show that, in additional to the nuclei activity, the nuclear obscuration also plays an important role in the visibility of PBL in Sy2s. These results can be interpreted in the framework of the unified model. We can reach these results in the unified model if: a) the absorption column density is higher at large inclinations and b) the scattering region is obscured at large inclinations.
△ Less
Submitted 2 November, 2006; v1 submitted 14 March, 2006;
originally announced March 2006.
