-
Model-Based Iterative Reconstruction of Three-Dimensional Magnetisation in a Nanowire Structure Using Electron Holographic Vector Field Tomography
Authors:
Aurys Silinga,
András Kovács,
Stephen McVitie,
Rafal E. Dunin-Borkowski,
Kayla Fallon,
Trevor P. Almeida
Abstract:
Methods for characterisation of 3D magnetic spin structures are necessary to advance the performance of 3D magnetic nanoscale technologies. However, as the component dimensions approach the nanometre range, it becomes more challenging to analyse 3D magnetic configurations with the appropriate spatial resolution. In this paper, we present a method based on Lorentz transmission electron microscopy i…
▽ More
Methods for characterisation of 3D magnetic spin structures are necessary to advance the performance of 3D magnetic nanoscale technologies. However, as the component dimensions approach the nanometre range, it becomes more challenging to analyse 3D magnetic configurations with the appropriate spatial resolution. In this paper, we present a method based on Lorentz transmission electron microscopy in which model-based iterative reconstruction (MBIR) is used to reconstruct the most probable magnetisation in an exemplar nanostructure. This method is based on relating electron phase measurements to the magnetic configuration of the nanostructure, and therefore, the method is subject to certain limitations. In this proof-of-concept experiment, MBIR was tested on an L-shaped ferromagnetic cobalt nanowire, fabricated using focused electron beam induced deposition. Off-axis electron holography was used to acquire a tomographic tilt series of electron holograms, which were analysed to measure magnetic electron phase shift over two tilt arcs with up to $ \pm 60$ degree tilt range. Then, a 3D magnetisation vector field consistent with the tomographic phase measurements was reconstructed, revealing multiple magnetic domains within the nanowire. The reconstructed magnetisation is accurate for magnetic domains larger than 50 nm, and higher resolution can be achieved by the continued development of tomographic reconstruction algorithms.
△ Less
Submitted 2 May, 2025; v1 submitted 22 November, 2024;
originally announced November 2024.
-
Materials for Quantum Technologies: a Roadmap for Spin and Topology
Authors:
N. Banerjee,
C. Bell,
C. Ciccarelli,
T. Hesjedal,
F. Johnson,
H. Kurebayashi,
T. A. Moore,
C. Moutafis,
H. L. Stern,
I. J. Vera-Marun,
J. Wade,
C. Barton,
M. R. Connolly,
N. J. Curson,
K. Fallon,
A. J. Fisher,
D. A. Gangloff,
W. Griggs,
E. Linfield,
C. H. Marrows,
A. Rossi,
F. Schindler,
J. Smith,
T. Thomson,
O. Kazakova
Abstract:
This Roadmap provides an overview of the critical role of materials in exploiting spin and topology for next-generation quantum technologies including computing, sensing, information storage and networking devices. We explore the key materials systems that support spin and topological phenomena and discuss their figures of merit. Spin and topology-based quantum technologies have several advantages…
▽ More
This Roadmap provides an overview of the critical role of materials in exploiting spin and topology for next-generation quantum technologies including computing, sensing, information storage and networking devices. We explore the key materials systems that support spin and topological phenomena and discuss their figures of merit. Spin and topology-based quantum technologies have several advantages over their classical, charged-based counterparts, including non-volatility, faster data processing speeds, higher integration densities and lower power consumption. We discuss the main challenges facing the field, identify strategies to overcome them, and provide a realistic outlook on future possibilities of spin-based and topological materials in quantum technology applications.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Phase Coexistence and Transitions between Antiferromagnetic and Ferromagnetic States in a Synthetic Antiferromagnet
Authors:
Christopher E. A. Barker,
Kayla Fallon,
Craig Barton,
Eloi Haltz,
Trevor P. Almeida,
Sara Villa,
Colin Kirkbride,
Francesco Maccherozzi,
Brice Sarpi,
Sarnjeet S. Dhesi,
Damien McGrouther,
Stephen McVitie,
Thomas A. Moore,
Olga Kazakova,
Christopher H. Marrows
Abstract:
In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an anti…
▽ More
In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an antiferromagnetically (AF) aligned ground state but can be forced into a full ferromagnetic (FM) alignment by applying an out-of-plane field $\sim 100$~mT. We study the spin textures in these multilayers in their ground state as well as around the transition point between the AF and FM states, at fields $\sim 40$~mT, by imaging the spin textures using complementary methods: photo-emission electron, magnetic force, and Lorentz transmission electron microscopies. The transformation into a FM state by field proceeds by a nucleation and growth process, where first skyrmionic nuclei form, which broaden into regions containing a FM-aligned labyrinth pattern that eventually occupies the whole film. This process remarkably occurs without any significant change in the net magnetic moment of the multilayer. The mix of AF- and FM-aligned regions on the micron scale in the middle of this transition is reminiscent of a first-order phase transition that exhibits phase coexistence. These results are important for guiding the design of spintronic devices using chiral magnetic textures made from SAFs.
△ Less
Submitted 2 February, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
On the optimal arrangement of $2d$ lines in $\mathbb{C}^d$
Authors:
Kean Fallon,
Joseph W. Iverson
Abstract:
We show the optimal coherence of $2d$ lines in $\mathbb{C}^{d}$ is given by the Welch bound whenever a skew Hadamard of order $d+1$ exists. Our proof uses a variant of Hadamard doubling that converts any equiangular tight frame of size $\tfrac{d-1}{2} \times d$ into another one of size $d \times 2d$. Among $d < 150$, this produces equiangular tight frames of new sizes when $d = 11$, $35$, $39$,…
▽ More
We show the optimal coherence of $2d$ lines in $\mathbb{C}^{d}$ is given by the Welch bound whenever a skew Hadamard of order $d+1$ exists. Our proof uses a variant of Hadamard doubling that converts any equiangular tight frame of size $\tfrac{d-1}{2} \times d$ into another one of size $d \times 2d$. Among $d < 150$, this produces equiangular tight frames of new sizes when $d = 11$, $35$, $39$, $43$, $47$, $59$, $67$, $71$, $83$, $95$, $103$, $107$, $111$, $119$, $123$, $127$, $131$, and $143$.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
Rainbow numbers of $[m] \times [n]$ for $x_1 + x_2 = x_3$
Authors:
Kean Fallon,
Ethan Manhart,
Joe Miller,
Hunter Rehm,
Nathan Warnberg,
Laura Zinnel
Abstract:
Consider the set $[m]\times [n] = \{(i,j)\, : 1\le i \le m, 1\le j \le n\}$ and the equation $x_1+x_2 = x_3$, namely $eq$. The \emph{rainbow number of $[m] \times [n]$ for $eq$}, denoted $\text{rb}([m]\times [n],eq)$, is the smallest number of colors such that for every surjective $\text{rb}([m]\times[n], eq)$-coloring of $[m]\times [n]$ there must exist a solution to $eq$, with component-wise add…
▽ More
Consider the set $[m]\times [n] = \{(i,j)\, : 1\le i \le m, 1\le j \le n\}$ and the equation $x_1+x_2 = x_3$, namely $eq$. The \emph{rainbow number of $[m] \times [n]$ for $eq$}, denoted $\text{rb}([m]\times [n],eq)$, is the smallest number of colors such that for every surjective $\text{rb}([m]\times[n], eq)$-coloring of $[m]\times [n]$ there must exist a solution to $eq$, with component-wise addition, where every element of the solution set is assigned a distinct color. This paper determines that $\text{rb}([m]\times [n], eq) = m+n+1$ for all values of $m$ and $n$ that a greater than or equal to $2$.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
Counterexamples to Siegel's Conjecture
Authors:
Kean P. Fallon,
Madisyn Janusiak,
Edward D. Kim,
Avery McLain
Abstract:
We prove that the intersection of a Hirsch polytope and a cube may be a non-Hirsch polytope.
We prove that the intersection of a Hirsch polytope and a cube may be a non-Hirsch polytope.
△ Less
Submitted 30 November, 2019;
originally announced December 2019.
-
Rainbow numbers of $[n]$ for $\sum_{i=1}^{k-1} x_i = x_k$
Authors:
Kean Fallon,
Colin Giles,
Hunter Rehm,
Simon Wagner,
Nathan Warnberg
Abstract:
Consider the set $\{1,2,\dots,n\} = [n]$ and an equation $eq$. The rainbow number of $[n]$ for $eq$, denoted $\operatorname{rb}([n],eq)$, is the smallest number of colors such that for every exact $\operatorname{rb}([n], eq)$-coloring of $[n]$, there exists a solution to $eq$ with every member of the solution set assigned a distinct color. This paper focuses on linear equations and, in particular,…
▽ More
Consider the set $\{1,2,\dots,n\} = [n]$ and an equation $eq$. The rainbow number of $[n]$ for $eq$, denoted $\operatorname{rb}([n],eq)$, is the smallest number of colors such that for every exact $\operatorname{rb}([n], eq)$-coloring of $[n]$, there exists a solution to $eq$ with every member of the solution set assigned a distinct color. This paper focuses on linear equations and, in particular, establishes the rainbow number for the equations $\sum_{i=1}^{k-1} x_i = x_k$ for $k=3$ and $k=4$. The paper also establishes a general lower bound for $k \ge 5$.
△ Less
Submitted 5 June, 2020; v1 submitted 24 January, 2019;
originally announced January 2019.
-
Quantitative imaging of hybrid chiral spin textures in magnetic multilayer systems by Lorentz microscopy
Authors:
K. Fallon,
S. McVitie,
W. Legrand,
F. Ajejas,
D. Maccariello,
S. Collin,
V. Cros,
N. Reyren
Abstract:
Chiral magnetic textures in ultrathin perpendicularly magnetised multilayer film stacks with an interfacial Dzyaloshinskii-Moriya interaction have been the focus of much research recently. The chirality associated with the broken inversion symmetry at the interface between an ultrathin ferromagnetic layer and a heavy metal with large spin-orbit coupling supports homochiral Néel domain walls and he…
▽ More
Chiral magnetic textures in ultrathin perpendicularly magnetised multilayer film stacks with an interfacial Dzyaloshinskii-Moriya interaction have been the focus of much research recently. The chirality associated with the broken inversion symmetry at the interface between an ultrathin ferromagnetic layer and a heavy metal with large spin-orbit coupling supports homochiral Néel domain walls and hedgehog (Néel) skyrmions. Under spin-orbit torques these Néel type magnetic structures are predicted, and have been measured, to move at high velocities. However recent studies have indicated that some multilayered systems may possess a more complex hybrid domain wall configuration, due to the competition between interfacial DMI and interlayer dipolar fields. These twisted textures are expected to have thickness dependent Néel and Bloch contributions to the domain or skyrmion walls. In this work, we use the methods of Lorentz microscopy to measure quantitatively for the first time experimentally both; i) the contributions of the Néel and Bloch contributions and ii) their spatial spin variation at high resolution. These are compared with modelled and simulated structures which are in excellent agreement with our experimental results. Our quantitative analysis provides powerful direct evidence of the Bloch wall component which exists in these hybrid walls and will be significant when exploiting such phenomena in spintronic applications.
△ Less
Submitted 11 January, 2019;
originally announced January 2019.
-
Manipulating matter with strong coupling: harvesting triplet excitons in organic exciton microcavities
Authors:
Daniel Polak,
Rahul Jayaprakash,
Anastasia Leventis,
Kealan J. Fallon,
Harriet Coulthard,
Anthony J. Petty II,
John Anthony,
Hugo Bronstein,
David G. Lidzey,
Jenny Clark,
Andrew J. Musser
Abstract:
Exciton-polaritons are quasiparticles with mixed photon and exciton character that demonstrate rich quantum phenomena, novel optoelectronic devices and the potential to modify chemical properties of materials. Organic semiconductors are of current interest for their room-temperature polariton formation. However, within organic optoelectronic devices, it is often the 'dark' spin-1 triplet excitons…
▽ More
Exciton-polaritons are quasiparticles with mixed photon and exciton character that demonstrate rich quantum phenomena, novel optoelectronic devices and the potential to modify chemical properties of materials. Organic semiconductors are of current interest for their room-temperature polariton formation. However, within organic optoelectronic devices, it is often the 'dark' spin-1 triplet excitons that dominate operation. These triplets have been largely ignored in treatments of polariton physics. Here we demonstrate polariton population from the triplet manifold via triplet-triplet annihilation, leading to polariton emission that is longer-lived (>microseconds) even than exciton emission in bare films. This enhancement arises from spin-2 triplet-pair states, formed by singlet fission or triplet-triplet annihilation, feeding the polariton. This is possible due to state mixing, which -in the strong coupling regime- leads to sharing of photonic character with states that are formally non-emissive. Such 'photonic sharing' offers the enticing possibility of harvesting or manipulating even states that are formally dark.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
Antiferromagnetic-ferromagnetic phase domain development in nanopatterned FeRh islands
Authors:
R. C. Temple,
T. P. Almeida,
J. R. Massey,
K. Fallon,
R. Lamb,
S. A. Morley,
F. Maccherozzi,
S. S. Dhesi,
D. McGrouther,
S. McVitie,
T. A. Moore,
C. H. Marrows
Abstract:
The antiferromagnetic to ferromagnetic phase transition in B2-ordered FeRh is imaged in laterally confined nanopatterned islands using photoemission electron microscopy with x-ray magnetic circular dichroism contrast. The resulting magnetic images directly detail the progression in the shape and size of the FM phase domains during heating and cooling through the transition. In 5 um square islands…
▽ More
The antiferromagnetic to ferromagnetic phase transition in B2-ordered FeRh is imaged in laterally confined nanopatterned islands using photoemission electron microscopy with x-ray magnetic circular dichroism contrast. The resulting magnetic images directly detail the progression in the shape and size of the FM phase domains during heating and cooling through the transition. In 5 um square islands this domain development during heating is shown to proceed in three distinct modes: nucleation, growth, and merging, each with subsequently greater energy costs. In 0.5 um islands, which are smaller than the typical final domain size, the growth mode is stunted and the transition temperature was found to be reduced by 20 K. The modification to the transition temperature is found by high resolution scanning transmission electron microscopy to be due to a 100 nm chemically disordered edge grain present as a result of ion implantation damage during the patterning. FeRh has unique possibilities for magnetic memory applications; the inevitable changes to its magnetic properties due to subtractive nanofabrication will need to be addressed in future work in order to progress from sheet films to suitable patterned devices.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
A transmission electron microscope study of Néel skyrmion magnetic textures in multilayer thin film systems with large interfacial chiral interaction
Authors:
S. McVitie,
S. Hughes,
K. Fallon,
S. McFadzean,
D. McGrouther,
M. Krajnak,
W. Legrand,
D. Maccariello,
S. Collin,
K. Garcia,
N. Reyren,
V. Cros,
A. Fert,
K. Zeissler,
C. H. Marrows
Abstract:
Skyrmions in ultrathin ferromagnetic metal (FM)/heavy metal (HM) multilayer systems produced by conventional sputtering methods have recently generated huge interest due to their applications in the field of spintronics. The sandwich structure with two correctly-chosen heavy metal layers provides an additive interfacial exchange interaction which promotes domain wall or skyrmion spin textures that…
▽ More
Skyrmions in ultrathin ferromagnetic metal (FM)/heavy metal (HM) multilayer systems produced by conventional sputtering methods have recently generated huge interest due to their applications in the field of spintronics. The sandwich structure with two correctly-chosen heavy metal layers provides an additive interfacial exchange interaction which promotes domain wall or skyrmion spin textures that are Néel in character and with a fixed chirality. Lorentz transmission electron microscopy (TEM) is a high resolution method ideally suited to quantitatively image such chiral magnetic configurations. When allied with physical and chemical TEM analysis of both planar and cross-sectional samples, key length scales such as grain size and the chiral variation of the magnetisation variation have been identified and measured. We present data showing the importance of the grain size (mostly < 10nm) measured from direct imaging and its potential role in describing observed behaviour of isolated skyrmions (diameter < 100nm). In the latter the region in which the magnetization rotates is measured to be around 30 nm. Such quantitative information on the multiscale magnetisation variations in the system is key to understanding and exploiting the behaviour of skyrmions for future device applications.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Pinning and hysteresis in the field dependent diameter evolution of skyrmions in Pt/Co/Ir superlattice stacks
Authors:
K. Zeissler,
M. Mruczkiewicz,
S. Finizio,
J. Raabe,
P. M. Shepley,
A. V. Sadovnikov,
S. A. Nikitov,
K. Fallon,
S. McFadzean,
S. McVitie,
T. A. Moore,
G. Burnell,
C. H. Marrows
Abstract:
We have imaged Néel skyrmion bubbles in perpendicularly magnetised polycrystalline multilayers patterned into 1 μm diameter dots, using scanning transmission x-ray microscopy. The skyrmion bubbles can be nucleated by the application of an external magnetic field and are stable at zero field with a diameter of 260 nm. Applying an out of plane field that opposes the magnetisation of the skyrmion bub…
▽ More
We have imaged Néel skyrmion bubbles in perpendicularly magnetised polycrystalline multilayers patterned into 1 μm diameter dots, using scanning transmission x-ray microscopy. The skyrmion bubbles can be nucleated by the application of an external magnetic field and are stable at zero field with a diameter of 260 nm. Applying an out of plane field that opposes the magnetisation of the skyrmion bubble core moment applies pressure to the bubble and gradually compresses it to a diameter of approximately 100 nm. On removing the field the skyrmion bubble returns to its original diameter via a hysteretic pathway where most of the expansion occurs in a single abrupt step. This contradicts analytical models of homogeneous materials in which the skyrmion compression and expansion are reversible. Micromagnetic simulations incorporating disorder can explain this behaviour using an effective thickness modulation between 10 nm grains.
△ Less
Submitted 4 June, 2017;
originally announced June 2017.
