Showing 1–33 of 33 results for author: Evangelisti, F

Optimizing Multi-Task Learning for Accurate Spacecraft Pose Estimation

Authors: Francesco Evangelisti, Francesco Rossi, Tobia Giani, Ilaria Bloise, Mattia Varile

Abstract: Accurate satellite pose estimation is crucial for autonomous guidance, navigation, and control (GNC) systems in in-orbit servicing (IOS) missions. This paper explores the impact of different tasks within a multi-task learning (MTL) framework for satellite pose estimation using monocular images. By integrating tasks such as direct pose estimation, keypoint prediction, object localization, and segme… ▽ More Accurate satellite pose estimation is crucial for autonomous guidance, navigation, and control (GNC) systems in in-orbit servicing (IOS) missions. This paper explores the impact of different tasks within a multi-task learning (MTL) framework for satellite pose estimation using monocular images. By integrating tasks such as direct pose estimation, keypoint prediction, object localization, and segmentation into a single network, the study aims to evaluate the reciprocal influence between tasks by testing different multi-task configurations thanks to the modularity of the convolutional neural network (CNN) used in this work. The trends of mutual bias between the analyzed tasks are found by employing different weighting strategies to further test the robustness of the findings. A synthetic dataset was developed to train and test the MTL network. Results indicate that direct pose estimation and heatmap-based pose estimation positively influence each other in general, while both the bounding box and segmentation tasks do not provide significant contributions and tend to degrade the overall estimation accuracy. △ Less

Submitted 16 October, 2024; originally announced October 2024.

Journal ref: Proceedings of SPAICE2024: The First Joint European Space Agency / IAA Conference on AI in and for Space, 2024. 33-37

Track-based alignment for the BESIII CGEM detector in the cosmic-ray test

Authors: A. Q. Guo, L. H. Wu, L. L. Wang, R. E. Mitchell, A. Amoroso, R. Baldini Ferroli, I. Balossino, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, G. Cibinetto, A. Cotta Ramusino, F. Cossio, M. Y. Dong, M. Da Rocha Rolo, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, I. Garzia, M. Gatta , et al. (27 additional authors not shown)

Abstract: The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical tri… ▽ More The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical triple Gas Electron Multipliers (CGEM). The transverse plane spatial resolution of CGEM is required to be 120 $μ$m or better. To meet this goal, a careful calibration of the detector is necessary to fully exploit the potential of the CGEM detector. In all the calibrations, the detector alignment plays an important role to improve the detector precision. The track-based alignment for the CGEM detector with the Millepede algorithm is implemented to reduce the uncertainties of the hit position measurement. Using the cosmic-ray data taken in 2020 with the two layers setup, the displacement and rotation of the outer layer with respect to the inner layer is determined by a simultaneous fit applied to more than 160000 tracks. A good alignment precision has been achieved that guarantees the design request could be satisfied in the future. A further alignment is going to be performed using the combined information of tracks from cosmic-ray and collisions after the CGEM is installed into the BESIII detector. △ Less

Submitted 14 December, 2022; v1 submitted 2 November, 2022; originally announced November 2022.

The CGEM-IT readout chain

Authors: A. Amoroso, R. Baldini Ferroli, I. Balossino, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, R. Bugalho, A. Calcaterra, S. Cerioni, S. Chiozzi, G. Cibinetto, A. Cotta Ramusino, F. Cossio, M. Da Rocha Rolo, F. De Mori, M. Destefanis, A. Di Francesco, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, S. Garbolino, I. Garzia, M. Gatta , et al. (22 additional authors not shown)

Abstract: An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worked out for the readout of the CGEM detector, including a new ASIC, dubbed TIGER -Torino Integrated GEM Electronics for Readout, designed for the amplification and digitization of the CGEM output signals. The data output b… ▽ More An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worked out for the readout of the CGEM detector, including a new ASIC, dubbed TIGER -Torino Integrated GEM Electronics for Readout, designed for the amplification and digitization of the CGEM output signals. The data output by TIGER are collected and processed by a first FPGA-based module, GEM Read Out Card, in charge of configuration and control of the front-end ASICs. A second FPGA-based module, named GEM Data Concentrator, builds the trigger selected event packets containing the data and stores them via the main BESIII data acquisition system. The design of the electronics chain, including the power and signal distribution, will be presented together with its performance. △ Less

Submitted 17 August, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

The X/Gamma-ray Imaging Spectrometer (XGIS) on-board THESEUS: design, main characteristics, and concept of operation

Authors: Claudio Labanti, Lorenzo Amati, Filippo Frontera, Sandro Mereghetti, José Luis Gasent-Blesa, Christoph Tenzer, Piotr Orleanski, Irfan Kuvvetli, Riccardo Campana, Fabio Fuschino, Luca Terenzi, Enrico Virgilli, Gianluca Morgante, Mauro Orlandini, Reginald C. Butler, John B. Stephen, Natalia Auricchio, Adriano De Rosa, Vanni Da Ronco, Federico Evangelisti, Michele Melchiorri, Stefano Squerzanti, Mauro Fiorini, Giuseppe Bertuccio, Filippo Mele , et al. (36 additional authors not shown)

Abstract: THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Sof… ▽ More THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Soft X-ray Imager, SXI, 0.3 - 5 keV), a hard X-ray, partially-imaging spectroscopic instrument (X and Gamma Imaging Spectrometer, XGIS, 2 keV - 10 MeV), and an optical/near-IR telescope with both imaging and spectroscopic capability (InfraRed Telescope, IRT, 0.7 - 1.8 $μ$m). The spacecraft will be capable of performing fast repointing of the IRT to the error region provided by the monitors, thus allowing it to detect and localize the transient sources down to a few arcsec accuracy, for immediate identification and redshift determination. The prime goal of the XGIS will be to detect transient sources, with monitoring timescales down to milliseconds, both independently of, or following, up SXI detections, and identify the sources performing localisation at < 15 arcmin and characterize them over a broad energy band, thus providing also unique clues to their emission physics. The XGIS system consists of two independent but identical coded mask cameras, arranged to cover 2 steradians . The XGIS will exploit an innovative technology coupling Silicon Drift Detectors (SDD) with crystal scintillator bars and a very low-noise distributed front-end electronics (ORION ASICs), which will produce a position sensitive detection plane, with a large effective area over a huge energy band (from soft X-rays to soft gamma-rays) with timing resolution down to a few $μ$s.Here is presented an overview of the XGIS instrument design, its configuration, and capabilities. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: Proceedings of the SPIE 2020, paper 11444-303

The XGIS imaging system onboard the THESEUS mission

Authors: José Luis Gasent-Blesa, Víctor Reglero, Paul Connell, Benjamín Pinazo-Herrero, Javier Navarro-González, Pedro Rodríguez-Martínez, Alberto J. Castro-Tirado, María Dolores Caballero-García, Lorenzo Amati, Claudio Labanti, Sandro Mereghetti, Filippo Frontera, Riccardo Campana, Mauro Orlandini, John Stephen, Luca Terenzi, Federico Evangelisti, Stefano Squerzanti, Michele Melchiorri, Fabio Fuschino, Adriano De Rosa, Gianluca Morgante

Abstract: Within the scientific goals of the THESEUS ESA/M5 candidate mission, a critical item is a fast (within a few s) and accurate (<15 arcmin) Gamma-Ray Burst and high-energy transient location from a few keV up to hard X-ray energy band. For that purpose, the signal multiplexing based on coded masks is the selected option to achieve this goal. This contribution is implemented by the XGIS Imaging Syste… ▽ More Within the scientific goals of the THESEUS ESA/M5 candidate mission, a critical item is a fast (within a few s) and accurate (<15 arcmin) Gamma-Ray Burst and high-energy transient location from a few keV up to hard X-ray energy band. For that purpose, the signal multiplexing based on coded masks is the selected option to achieve this goal. This contribution is implemented by the XGIS Imaging System, based on that technique. The XGIS Imaging System has the heritage of previous payload developments: LEGRI/Minisat-01, INTEGRAL, UFFO/Lomonosov and ASIM/ISS. In particular the XGIS Imaging System is an upgrade of the ASIM system in operation since 2018 on the International Space Station. The scientific goal is similar: to detect a gamma-ray transient. But while ASIM focuses on Terrestrial Gamma-ray Flashes, THESEUS aims for the GRBs. For each of the two XGIS Cameras, the coded mask is located at 630 mm from the detector layer. The coding pattern is implemented in a Tungsten plate (1 mm thickness) providing a good multiplexing capability up to 150 keV. In that way both XGIS detector layers (based on Si and CsI detectors) have imaging capabilities at the medium - hard X-ray domain. This is an improvement achieved during the current THESEUS Phase-A. The mask is mounted on top of a collimator that provides the mechanical assembly support, as well as good cosmic X-ray background shielding. The XGIS Imaging System preliminary structural and thermal design, and the corresponding analyses, are included in this contribution, as it is a preliminary performance evaluation. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: Proceedings of the SPIE 2020, paper 11444-278

PARSIFAL: a toolkit for triple-GEM parametrized simulation

Authors: A. Amoroso, R. Baldini Ferroli, I. Balossino, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, A. Calcaterra, S. Cerioni, W. Cheng, G. Cibinetto, A. Cotta Ramusino, F. Cossio, M. Da Rocha Rolo, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, I. Garzia, M. Gatta, G. Giraudo, S. Gramigna , et al. (16 additional authors not shown)

Abstract: PARSIFAL (PARametrized SImulation by Farinelli And Lavezzi) is a fast and reliable software tool that reproduces the complete response of a triple-GEM detector to the passage of a charged particle, taking into account the main physical effects. Starting from the detector configuration and the particle information, PARSIFAL reproduces ionization, spatial and temporal diffusion, effect of magnetic f… ▽ More PARSIFAL (PARametrized SImulation by Farinelli And Lavezzi) is a fast and reliable software tool that reproduces the complete response of a triple-GEM detector to the passage of a charged particle, taking into account the main physical effects. Starting from the detector configuration and the particle information, PARSIFAL reproduces ionization, spatial and temporal diffusion, effect of magnetic field, if present, and GEM amplification to provide the dependable triple-GEM detector response. In the design and optimization stages of this kind of detectors, simulations play an important role. Accurate and robust software programs, such as GARFIELD++, can simulate the transport of electrons and ions in a gas medium and their interaction with the electric field, but they are CPU-time consuming. The necessity to reduce the processing time while maintaining the precision of a full simulation is the main driver of this work. For a given set of geometrical and electrical settings, GARFIELD++ is run once-and-for-all to provide the input parameters for PARSIFAL. Once PARSIFAL is initialized and run, it produces the detector output, including the signal induction and the output of the electronics. The results of the analysis of the simulated data obtained with PARSIFAL are compared with the results of the experimental data collected during a testbeam: some tuning factors are applied to the simulation to improve the agreement. This paper describes the structure of the code and the methodology used to match the output to the experimental data. △ Less

Submitted 7 June, 2023; v1 submitted 9 May, 2020; originally announced May 2020.

Comments: submitted to Computer Physics Communications, CPiC

Time performance of a triple-GEM detector at high rate

Authors: A. Amoroso, R. Baldini Ferroli, I. Balossino, M. Bertani, D. Bettoni, A. Bortone, A. Calcaterra, S. Cerioni, W. Cheng, G. Cibinetto, A. Cotta Ramusino, F. Cossio, M. Da Rocha Rolo, F. De Mori, A. Denig, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, B. Garillon, I. Garzia, M. Gatta, G. Giraudo , et al. (23 additional authors not shown)

Abstract: Gaseous detectors are used in high energy physics as trackers or, more generally, as devices for the measurement of the particle position. For this reason, they must provide high spatial resolution and they have to be able to operate in regions of intense radiation, i.e. around the interaction point of collider machines. Among these, Micro Pattern Gaseous Detectors (MPGD) are the latest frontier a… ▽ More Gaseous detectors are used in high energy physics as trackers or, more generally, as devices for the measurement of the particle position. For this reason, they must provide high spatial resolution and they have to be able to operate in regions of intense radiation, i.e. around the interaction point of collider machines. Among these, Micro Pattern Gaseous Detectors (MPGD) are the latest frontier and allow to overcome many limitations of the pre-existing detectors, such as the radiation tolerance and the rate capability. The gas Electron Multiplier (GEM) is a MPGD that exploits an intense electric field in a reduced amplification region in order to prevent discharges. Several amplification stages, like in a triple-GEM, allow to increase the detector gain and to reduce the discharge probability. Reconstruction techniques such as charge centroid (CC) and micro-Time Projection Chamber ($\upmu$TPC) are used to perform the position measurement. From literature triple-GEMs show a stable behaviour up to $10^8\,$Hz/cm$^2$. A testbeam with four planar triple-GEMs has been performed at the Mainz Microtron (MAMI) facility and their performance was evaluated in different beam conditions. In this article a focus on the time performance for the $\upmu$TPC clusterization is given and a new measurement of the triple-GEM limits at high rate will be presented. △ Less

Submitted 10 April, 2020; originally announced April 2020.

Triple GEM performance in magnetic field

Authors: M. Alexeev, A. Amoroso, S. Bagnasco, R. Baldini Ferroli, I. Balossino, G. Bencivenni, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, A. Calcaterra, M. Capodiferro, V. Carassiti, S. Cerioni, J. Chai, W. Cheng, S. Chiozzi, G. Cibinetto, A. Cotta Ramusino, G. Cotto, F. Cossio, M. Da Rocha Rolo, F. De Mori, M. Destefanis, D. Domenici , et al. (43 additional authors not shown)

Abstract: Performance of triple GEM prototypes in strong magnetic field has been evaluated bymeans of a muon beam at the H4 line of the SPS test area at CERN. Data have been reconstructedand analyzed offline with two reconstruction methods: the charge centroid and the micro-Time-Projection-Chamber exploiting the charge and the time measurement respectively. A combinationof the two reconstruction methods is… ▽ More Performance of triple GEM prototypes in strong magnetic field has been evaluated bymeans of a muon beam at the H4 line of the SPS test area at CERN. Data have been reconstructedand analyzed offline with two reconstruction methods: the charge centroid and the micro-Time-Projection-Chamber exploiting the charge and the time measurement respectively. A combinationof the two reconstruction methods is capable to guarantee a spatial resolution better than 150μmin magnetic field up to a 1 T. △ Less

Submitted 17 August, 2019; originally announced August 2019.

GRAAL: Gem Reconstruction And Analysis Library

Authors: R. Farinelli, M. Alexeev, A. Amoroso, S. Bagnasco, R. BaldiniFerroli, I. Balossino, M. Bertani, D. Bettoni, A. Bortone, F. Bianchi, A. Calcaterra, S. Cerioni, J. Chai, W. Cheng, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, G. Cotto, M. Da Rocha Rolo, F. De Mori, M. Destefanis, F. Evangelisti, L. Fava, G. Felici , et al. (25 additional authors not shown)

Abstract: MPGD are the new frontier in gas trackers. Among this kind of devices, theGEM chambers are widely used. The experimental signals acquired with the detector mustobviously be reconstructed and analysed. In this contribution, a new offline software to performreconstruction, alignment and analysis on the data collected with APV-25 and TIGER ASICswill be presented. GRAAL (Gem Reconstruction And Analysi… ▽ More MPGD are the new frontier in gas trackers. Among this kind of devices, theGEM chambers are widely used. The experimental signals acquired with the detector mustobviously be reconstructed and analysed. In this contribution, a new offline software to performreconstruction, alignment and analysis on the data collected with APV-25 and TIGER ASICswill be presented. GRAAL (Gem Reconstruction And Analysis Library) is able to measurethe performance of a MPGD detector with a strip segmented anode (presently). The code isdivided in three parts: reconstruction, where the hits are digitized and clusterized; tracking,where a procedure fits the points from the tracking system and uses that information to align thechamber with rotations and shifts; analysis, where the performance is evaluated (e.g. efficiency,spatial resolution,etc.). The user must set the geometry of the setup and then the programreturns automatically the analysis results, taking care of different conditions of gas mixture,electric field, magnetic field, geometries, strip orientation, dead strip, misalignment and manyothers. △ Less

Submitted 8 May, 2019; originally announced May 2019.

A fast and parametric digitization for triple-GEM detectors

Authors: R. Farinelli, M. Alexeev, A. Amoroso, S. Bagnasco, R. Baldini Ferrioli, I. Balossino, M. Bertani, D. Bettoni, A. Bortone, F. Bianchi, A. Calcaterra, S. Cerioni, J. Chai, W. Cheng, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, G. Cotto, M. Da Rocha Rolo, F. De Mori, M. Destefanis, F. Evangelisti, L. Fava, G. Felici , et al. (26 additional authors not shown)

Abstract: Triple-GEM detectors are a well known technology in high energy physics. In order to have a complete understanding of their behavior, in parallel with on beam testing, a Monte Carlo code has to be developed to simulate their response to the passage of particles. The software must take into account all the physical processes involved from the primary ionization up to the signal formation, e.g. the… ▽ More Triple-GEM detectors are a well known technology in high energy physics. In order to have a complete understanding of their behavior, in parallel with on beam testing, a Monte Carlo code has to be developed to simulate their response to the passage of particles. The software must take into account all the physical processes involved from the primary ionization up to the signal formation, e.g. the avalanche multiplication and the effect of the diffusion on the electrons. In the case of gas detectors, existing software such as Garfield already perform a very detailed simulation but are CPU time consuming. A description of a reliable but faster simulation is presented here: it uses a parametric description of the variables of interest obtained by suitable preliminary Garfield simulations and tuned to the test beam data. It can reproduce the real values of the charge measured by the strip, needed to reconstruct the position with the Charge Centroid method. In addition, particular attention was put to the simulation of the timing information, which permits to apply also the micro-Time Projection Chamber position reconstruction, for the first time on a triple-GEM. A comparison between simulation and experimental values of some sentinel variables in different conditions of magnetic field, high voltage settings and incident angle will be shown. △ Less

Submitted 12 April, 2019; originally announced April 2019.

A Cylindrical GEM Inner Tracker for the BESIII experiment at IHEP

Authors: R. Farinelli, M. Alexeev, A. Amoroso, F. Bianchi, M. Bertani, D. Bettoni, N. Canale, A. Calcaterra, V. Carassiti, S. Cerioni, J. Chai, S. Chiozzi, G. Cibinetto, A. Cotta Ramusino, F. Cossio, F. De Mori, M. Destefanis, T. Edisher, F. Evangelisti, L. Fava, G. Felici, E. Fioravanti, I. Garzia, M. Gatta, M. Greco , et al. (21 additional authors not shown)

Abstract: The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of… ▽ More The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of 10^33 cm-2 s-1 and aging effect, the MDC decreases its efficiency in the first layers up to 35% with respect to the value in 2014. Since BESIII has to take data up to 2022 with the chance to continue up to 2027, the Italian collaboration proposed to replace the inner part of the MDC with three independent layers of Cylindrical triple-GEM (CGEM). The CGEM-IT project will deploy several new features and innovation with respect the other current GEM based detector: the μTPC and analog readout, with time and charge measurements will allow to reach the 130 μm spatial resolution in 1 T magnetic field requested by the BESIII collaboration. In this proceeding, an update of the status of the project will be presented, with a particular focus on the results with planar and cylindrical prototypes with test beams data. These results are beyond the state of the art for GEM technology in magnetic field. △ Less

Submitted 2 July, 2018; originally announced July 2018.

Innovative design and construction technique for the Cylindrical GEM detector for the BESIII experiment

Authors: A. Amoroso, M. Alexeev, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti, I. Garzia , et al. (27 additional authors not shown)

Abstract: Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to creat… ▽ More Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to create very large area GEM foils (up to 50x100 cm2) and thanks to the small thickness of these foil is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by permaglass rings glued at the edges. These rings are use to assembly the CGEM together with a dedicated Vertical Insertion System and moreover there is placed the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this presentation will be presented an overview of the construction technique and the validation of this technique through the realization of a CGEM and its first tests. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Comments: Proceedings for "Technology and Instrumentation in Particle Physics 2017" (TIPP2017) Conference, 22-26 May 2017, Beijing, China

Test beam results of a Cylindrical GEM detector for the BESIII experiment

Authors: G. Mezzadri, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti , et al. (28 additional authors not shown)

Abstract: Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows t… ▽ More Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows to create very large area GEM foils (up to 50x100 $\mathrm{cm}^2$) and thanks to the small thickness of these foils is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by Permaglass rings glued at the edges. These rings are used to assembly the CGEM, together with a dedicated Vertical Insertion System and moreover they host the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this contribution an overview of the construction technique, the validation of this technique through the realization of a CGEM, and its first tests will be presented. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Comments: 10 pages, 7 figures. Proceedings of 5th International Conference on Micro-Pattern Gas Detectors (MPGD2017), Philadelphia 22-26 May 2017

Performance of the micro-TPC Reconstruction for GEM Detectors at High Rate

Authors: L. Lavezzi, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti , et al. (27 additional authors not shown)

Abstract: Gas detectors are one of the pillars of the research in fundamental physics. Since many years, a new concept of detectors, the Micro Pattern Gas Detectors, allows to overcome many of the problems of other types of commonly used detectors, as drift chambers and microstrips, reducing the discharge rate and increasing the radiation tolerance. Among these, one of the most commonly used is the Gas Elec… ▽ More Gas detectors are one of the pillars of the research in fundamental physics. Since many years, a new concept of detectors, the Micro Pattern Gas Detectors, allows to overcome many of the problems of other types of commonly used detectors, as drift chambers and microstrips, reducing the discharge rate and increasing the radiation tolerance. Among these, one of the most commonly used is the Gas Electron Multiplier. Commonly deployed as fast timing detectors and triggers, due to their fast response, high rate capability and high radiation hardness, they can also be used as trackers. The center of gravity readout technique allows to overcome the limit of the digital pads, whose spatial resolution is constrained by the pitch size. The presence of a high external magnetic field can distort the electronic cloud and affect the spatial resolution. The micro-TPC reconstruction method allows to reconstruct the three dimensional particle position as in a traditional Time Projection Chamber, but within a drift gap of a few millimeters. This method brings these detectors into a new perspective for what concerns the spatial resolution in strong magnetic field. In this report, the basis of this new technique will be shown and it will be compared to the traditional center of gravity. The results of a series of test beam performed with 10 x 10 cm2 planar prototypes in magnetic field will also be presented. This is one of the first implementations of this technique for GEM detectors in magnetic field and allows to reach unprecedented performance for gas detectors, up to a limit of 120 micron at 1T, one of the world's best results for MPGDs in strong magnetic field. The micro-TPC reconstruction has been recently tested at very high rates in a test beam at the MAMI facility; preliminary results of the test will be presented. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Comments: Proceedings for "2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)" (IEEE17) Conference, 21-28 October 2017, Atlanga, Georgia, USA (prepared for submission to IEEE Conference Record)

Test beam results with prototypes for the new Cylindrical GEM Inner Tracker of the BESIII experiment

Authors: L. Lavezzi, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti , et al. (27 additional authors not shown)

Abstract: A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150 GeV/c momentum, to evaluate the efficiency and resolution under different working conditions. The obtained efficiency was in the 96 - 98% range. Two complementary… ▽ More A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150 GeV/c momentum, to evaluate the efficiency and resolution under different working conditions. The obtained efficiency was in the 96 - 98% range. Two complementary algorithms for the position determination were developed: the charge centroid and the micro-TPC methods. With the former, resolutions <100 micron and <200 micron were achieved without and with magnetic field, respectively. The micro-TPC improved these results. By the end of 2016, the first cylindrical prototype was tested on the same beam line. It showed optimal stability under different settings. The comparison of its performance with respect to the planar chambers is ongoing. Here, the results of the planar prototype tests will be addressed. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Comments: Proceedings for "Incontri di Fisica delle Alte Energie 2017" (IFAE17) Conference, 19-21 April 2017, Trieste, Italy (prepared for submission to Nuovo Cimento C - Colloquia on Physics)

The new cylindrical GEM inner tracker of BESIII

Authors: L. Lavezzi, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti , et al. (27 additional authors not shown)

Abstract: The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a… ▽ More The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a 1T magnetic field. The simultaneous measurement of both the deposited charge and the signal time will permit to use a combination of two algorithms to evaluate the spatial position of the charged tracks inside the CGEM-IT: the charge centroid and the micro time projection chamber modes. They are complementary and can cope with the asymmetry of the electron avalanche when running in magnetic field and with non-orthogonal incident tracks. To evaluate the behavior under different working settings, both planar chambers and the first cylindrical prototype have been tested during various test beams at CERN with 150 GeV/c muons and pions. This paper reports the results obtained with the two reconstruction methods and a comparison between the planar and cylindrical chambers. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Comments: Proceedings for "Particles and Nuclei International Conference 2017" (PANIC17) Conference, 1-5 September 2017, Beijing, China (prepared for submission to International Journal of Modern Physics: Conference Series)

Development and Test of a uTPC Cluster Reconstruction for a Triple GEM Detector in Strong Magnetic Field

Authors: R. Farinelli, M. Alexeev, A. Amoroso, F. Bianchi, M. Bertani, D. Bettoni, N. Canale, A. Calcaterra, V. Carassiti, S. Cerioni, J. Chai, S. Chiozzi, G. Cibinetto, A. Cotta Ramusino, F. Cossio, F. De Mori, M. Destefanis, T. Edisher, F. Evangelisti, L. Fava, G. Felici, E. Fioravanti, I. Garzia, M. Gatta, M. Greco , et al. (21 additional authors not shown)

Abstract: Performance of triple GEM prototypes has been evaluated by means of a muon beam at the H4 line of the SPS test area at CERN. The data from two planar prototypes have been reconstructed and analyzed offline with two clusterization methods: the enter of gravity of the charge distribution and the micro Time Projection Chamber (\muTPC). Concerning the spatial resolution, the charge centroid cluster re… ▽ More Performance of triple GEM prototypes has been evaluated by means of a muon beam at the H4 line of the SPS test area at CERN. The data from two planar prototypes have been reconstructed and analyzed offline with two clusterization methods: the enter of gravity of the charge distribution and the micro Time Projection Chamber (\muTPC). Concerning the spatial resolution, the charge centroid cluster reconstruction performs extremely well with no magnetic field: the resolution is well below 100 \mum . Increasing the magnetic field intensity, the resolution degrades almost linearly as effect of the Lorentz force that displaces, broadens and asymmetrizes the electron avalanche. Tuning the electric fields of the GEM prototype we could achieve the unprecedented spatial resolution of 190 \mum at 1 Tesla. In order to boost the spatial resolution with strong magnetic field and inclined tracks a \muTPC cluster reconstruction has been investigated. Such a readout mode exploits the good time resolution of the GEM detector and electronics to reconstruct the trajectory of the particle inside the conversion gap. Beside the improvement of the spatial resolution, information on the track angle can be also extracted. The new clustering algorithm has been tested with diagonal tracks with no magnetic field showing a resolution between 100 um and 150 um for the incident angle ranging from 10° to 45° . Studies show similar performance with 1 Tesla magnetic field. This is the first use of a \muTPC readout with a triple GEM detector in magnetic field. This study has shown that a combined readout is capable to guarantee stable performance over a broad spectrum of particle momenta and incident angles, up to a 1 Tesla magnetic field. △ Less

Submitted 14 July, 2017; originally announced July 2017.

The Cylindrical GEM Inner Tracker of the BESIII experiment: prototype test beam results

Authors: L. Lavezzi, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, E. Fioravanti , et al. (27 additional authors not shown)

Abstract: A cylindrical GEM detector is under development, to serve as an upgraded inner tracker at the BESIII spectrometer. It will consist of three layers of cylindrically-shaped triple GEMs surrounding the interaction point. The experiment is taking data at the e+e- collider BEPCII in Beijing (China) and the GEM tracker will be installed in 2018. Tests on the performances of triple GEMs in strong magneti… ▽ More A cylindrical GEM detector is under development, to serve as an upgraded inner tracker at the BESIII spectrometer. It will consist of three layers of cylindrically-shaped triple GEMs surrounding the interaction point. The experiment is taking data at the e+e- collider BEPCII in Beijing (China) and the GEM tracker will be installed in 2018. Tests on the performances of triple GEMs in strong magnetic field have been run by means of the muon beam available in the H4 line of SPS (CERN) with both planar chambers and the first cylindrical prototype. Efficiencies and resolutions have been evaluated using different gains, gas mixtures, with and without magnetic field. The obtained efficiency is 97-98% on single coordinate view, in many operational arrangements. The spatial resolution for planar GEMs has been evaluated with two different algorithms for the position determination: the charge centroid and the micro time projection chamber (mu-TPC) methods. The two modes are complementary and are able to cope with the asymmetry of the electron avalanche when running in magnetic field, and with non-orthogonal incident tracks. With the charge centroid, a resolution lower than 100 micron has been reached without magnetic field and lower than 200 micron with a magnetic field up to 1 T. The mu-TPC mode showed to be able to improve those results. In the first beam test with the cylindrical prototype, the detector had a very good stability under different voltage configurations and particle intensities. The resolution evaluation is in progress. △ Less

Submitted 3 July, 2017; v1 submitted 7 June, 2017; originally announced June 2017.

Comments: Proceedings for "Instrumentation for Colliding Beam Physics" (INSTR17) Conference, 27 February - 3 March 2017, Novosibirsk, Russia (prepared for submission to JINST)

A custom readout electronics for the BESIII CGEM detector

Authors: M. Da Rocha Rolo, M. Alexeev, A. Amoroso, R. Baldini Ferroli, M. Bertani, D. Bettoni, F. Bianchi, R. Bugalho, A. Calcaterra, N. Canale, M. Capodiferro, V. Carassiti, S. Cerioni, JY. Chai, S. Chiozzi, G. Cibinetto, F. Cossio, A. Cotta Ramusino, F. De Mori, M. Destefanis, A. Di Francesco, J. Dong, F. Evangelisti, R. Farinelli, L. Fava , et al. (31 additional authors not shown)

Abstract: For the upgrade of the inner tracker of the BESIII spectrometer, planned for 2018, a lightweight tracker based on an innovative Cylindrical Gas Electron Multiplier (CGEM) detector is now under development. The analogue readout of the CGEM enables the use of a charge centroid algorithm to improve the spatial resolution to better than 130 um while loosening the pitch strip to 650 um, which allows to… ▽ More For the upgrade of the inner tracker of the BESIII spectrometer, planned for 2018, a lightweight tracker based on an innovative Cylindrical Gas Electron Multiplier (CGEM) detector is now under development. The analogue readout of the CGEM enables the use of a charge centroid algorithm to improve the spatial resolution to better than 130 um while loosening the pitch strip to 650 um, which allows to reduce the total number of channels to about 10 000. The channels are readout by 160 dedicated integrated 64-channel front-end ASICs, providing a time and charge measurement and featuring a fully-digital output. The energy measurement is extracted either from the time-over-threshold (ToT) or the 10-bit digitisation of the peak amplitude of the signal. The time of the event is generated by quad-buffered low-power TDCs, allowing for rates in excess of 60 kHz per channel. The TDCs are based on analogue interpolation techniques and produce a time stamp (or two, if working in ToT mode) of the event with a time resolution better than 50 ps. The front-end noise, based on a CSA and CR-RC2 shapers, dominate the channel intrinsic time jitter, which is less than 5 ns r.m.s.. The time information of the hit can be used to reconstruct the track path, operating the detector as a small TPC and hence improving the position resolution when the distribution of the cloud, due to large incident angle or magnetic field, is very broad. Event data is collected by an off-detector motherboard, where each GEM-ROC readout card handles 4 ASIC carrier PCBs (512 channels). Configuration upload and data readout between the off-detector electronics and the VME-based data collector cards are managed by bi-directional fibre optical links. △ Less

Submitted 28 June, 2017; v1 submitted 7 June, 2017; originally announced June 2017.

Comments: Proceedings for "Instrumentation for Colliding Beam Physics" (INSTR17) conference, 27 February - 3 March 2017, Novosibirsk, Russia. Updated version with minor corrections suggested by reviewers, to be published by JINST

The Physics of the B Factories

Authors: A. J. Bevan, B. Golob, Th. Mannel, S. Prell, B. D. Yabsley, K. Abe, H. Aihara, F. Anulli, N. Arnaud, T. Aushev, M. Beneke, J. Beringer, F. Bianchi, I. I. Bigi, M. Bona, N. Brambilla, J. B rodzicka, P. Chang, M. J. Charles, C. H. Cheng, H. -Y. Cheng, R. Chistov, P. Colangelo, J. P. Coleman, A. Drutskoy , et al. (2009 additional authors not shown)

Abstract: This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary… ▽ More This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026. △ Less

Submitted 31 October, 2015; v1 submitted 24 June, 2014; originally announced June 2014.

Comments: 928 pages, version 3 (arXiv:1406.6311v3) corresponds to the alpha, beta, gamma version of the book, the other versions use the phi1, phi2, phi3 notation

Report number: SLAC-PUB-15968, KEK Preprint 2014-3

Journal ref: Eur. Phys. J. C74 (2014) 3026

The LAUE project and its main results

Authors: E. Virgilli, F. Frontera, V. Valsan, V. Liccardo, V. Carassiti, S. Squerzanti, M. Statera, M. Parise, S. Chiozzi, F. Evangelisti, E. Caroli, J. Stephen, N. Auricchio, S. Silvestri, A. Basili, F. Cassese, L. Recanatesi, V. Guidi, V. Bellucci, R. Camattari, C. Ferrari, A. Zappettini, E. Buffagni, E. Bonnini, M. Pecora , et al. (2 additional authors not shown)

Abstract: We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made… ▽ More We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made of petals is feasible. Our goal is a lens in the 80-600 keV energy band. In addition to a detailed description of the new LARIX facility, in which the lens is being assembled, we will report the results of the project obtained so far. △ Less

Submitted 20 January, 2014; originally announced January 2014.

Comments: 17 pages, SPIE conference 2013 - San Diego, USA

SuperB Technical Design Report

Authors: SuperB Collaboration, M. Baszczyk, P. Dorosz, J. Kolodziej, W. Kucewicz, M. Sapor, A. Jeremie, E. Grauges Pous, G. E. Bruno, G. De Robertis, D. Diacono, G. Donvito, P. Fusco, F. Gargano, F. Giordano, F. Loddo, F. Loparco, G. P. Maggi, V. Manzari, M. N. Mazziotta, E. Nappi, A. Palano, B. Santeramo, I. Sgura, L. Silvestris , et al. (384 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch… ▽ More In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: 495 pages

Report number: INFN-13-01/PI, LAL 13-01, SLAC-R-1003

Development status of the LAUE project

Authors: F. Frontera, E. Virgilli, V. Liccardo, V. Valsan, V. Carassiti, S. Chiozzi, F. Evangelisti, S. Squerzanti, M. Statera, V. Guidi, C. Ferrari, R. A. Zappettini, E. Caroli, N. Auricchio, S. Silvestri, R. Camattari, F. Cassese, L. Recanatesi, M. Pecora, S. Mottini, B. Negri

Abstract: We present the status of LAUE, a project supported by the Italian Space Agency (ASI), and devoted to develop Laue lenses with long focal length (up to 100 meters), for hard X--/soft gamma--ray astronomy (80-600 keV). Thanks to their focusing capability, the design goal is to improve the sensitivity of the current instrumention in the above energy band by 2 orders of magnitude, down to a few times… ▽ More We present the status of LAUE, a project supported by the Italian Space Agency (ASI), and devoted to develop Laue lenses with long focal length (up to 100 meters), for hard X--/soft gamma--ray astronomy (80-600 keV). Thanks to their focusing capability, the design goal is to improve the sensitivity of the current instrumention in the above energy band by 2 orders of magnitude, down to a few times $10^{-8}$ photons/(cm$^2$ s keV). △ Less

Submitted 21 November, 2012; originally announced November 2012.

Comments: 9 pages, 9 figures, presented at the Space Telescopes and Instrumentation Symposium in Amsterdam, 2012: Ultraviolet to Gamma Ray Conference. Published in the Proceedings of the SPIE, Volume 8443, id. 84430B-84430B-9 (2012)

Implications of LHCb measurements and future prospects

Authors: LHCb collaboration, A. Bharucha, I. I. Bigi, C. Bobeth, M. Bobrowski, J. Brod, A. J. Buras, C. T. H. Davies, A. Datta, C. Delaunay, S. Descotes-Genon, J. Ellis, T. Feldmann, R. Fleischer, O. Gedalia, J. Girrbach, D. Guadagnoli, G. Hiller, Y. Hochberg, T. Hurth, G. Isidori, S. Jaeger, M. Jung, A. Kagan, J. F. Kamenik , et al. (741 additional authors not shown)

Abstract: During 2011 the LHCb experiment at CERN collected 1.0 fb-1 of sqrt{s} = 7 TeV pp collisions. Due to the large heavy quark production cross-sections, these data provide unprecedented samples of heavy flavoured hadrons. The first results from LHCb have made a significant impact on the flavour physics landscape and have definitively proved the concept of a dedicated experiment in the forward region a… ▽ More During 2011 the LHCb experiment at CERN collected 1.0 fb-1 of sqrt{s} = 7 TeV pp collisions. Due to the large heavy quark production cross-sections, these data provide unprecedented samples of heavy flavoured hadrons. The first results from LHCb have made a significant impact on the flavour physics landscape and have definitively proved the concept of a dedicated experiment in the forward region at a hadron collider. This document discusses the implications of these first measurements on classes of extensions to the Standard Model, bearing in mind the interplay with the results of searches for on-shell production of new particles at ATLAS and CMS. The physics potential of an upgrade to the LHCb detector, which would allow an order of magnitude more data to be collected, is emphasised. △ Less

Submitted 30 April, 2013; v1 submitted 16 August, 2012; originally announced August 2012.

Comments: v2: 180 pages; many figures. Updated for submission to EPJC; v3: published version

Report number: LHCb-PUB-2012-006; LHCb-PAPER-2012-031; CERN-PH-EP-2012-334

Journal ref: EPJ C 73 (2013) 2373

Laue lenses for hard X-/soft Gamma-rays: new prototype results

Authors: E. Virgilli, F. Frontera, V. Valsan, V. Liccardo, V. Carassiti, F. Evangelisti, S. Squerzanti

Abstract: We present the results obtained with the new Laue lens prototype built in the LARIX facility in the Physics Department of University of Ferrara. Following the results of the first prototype presented at the SPIE conference in Marseille, and also thanks to the methods adopted for improving the prototype (SPIE conference in San Diego, Ferrari et al. 2009) here we present the results of the new proto… ▽ More We present the results obtained with the new Laue lens prototype built in the LARIX facility in the Physics Department of University of Ferrara. Following the results of the first prototype presented at the SPIE conference in Marseille, and also thanks to the methods adopted for improving the prototype (SPIE conference in San Diego, Ferrari et al. 2009) here we present the results of the new prototype with improved performances in terms of point spread function (PSF) and spectral response. △ Less

Submitted 25 October, 2011; originally announced October 2011.

Comments: 9 pages,8 figures. Paper presented at the SPIE conference in San Diego, August 2011, on "Optics for EUV, X-ray, and Gamma-Ray Astronomy". To be published in the Proceedings of SPIE, vol. 8147, 2011

New results on focusing of gamma-rays with Laue lenses

Authors: F. Ferrari, F. Frontera, G. Loffredo, E. Virgilli, C. Guidorzi, V. Carassiti, F. Evangelisti, L. Landi, S. Chiozzi, S. Squerzanti, E. Caroli, J. B. Stephen, F. Schiavone, A. Basili, K. H. Andersen, P. Courtois

Abstract: We report on new results on the development activity of broad band Laue lenses for hard X-/gamma-ray astronomy (70/100-600 keV). After the development of a first prototype, whose performance was presented at the SPIE conference on Astronomical Telescopes held last year in Marseille (Frontera et al. 2008), we have improved the lens assembling technology. We present the development status of the n… ▽ More We report on new results on the development activity of broad band Laue lenses for hard X-/gamma-ray astronomy (70/100-600 keV). After the development of a first prototype, whose performance was presented at the SPIE conference on Astronomical Telescopes held last year in Marseille (Frontera et al. 2008), we have improved the lens assembling technology. We present the development status of the new lens prototype that is on the way to be assembled. △ Less

Submitted 13 October, 2009; originally announced October 2009.

Comments: 8 pages, 11 figures, to be Published in SPIE Proceedings, vol.7437-19, 2009

Focusing of gamma-rays with Laue lenses: first results

Authors: F. Frontera, G. Loffredo, A. Pisa, F. Nobili, V. Carassiti, F. Evangelisti, L. Landi, S. Squerzanti, E. Caroli, J. B. Stephen, K. H. Andersen, P. Courtois, N. Auricchio, L. Milani, B. Negri

Abstract: We report on the first results obtained from our development project of focusing gamma-rays ($>$60 keV) by using Laue lenses. The first lens prototype model has been assembled and tested. We describe the technique adopted and the lens focusing capabilities at about 100 keV. We report on the first results obtained from our development project of focusing gamma-rays ($>$60 keV) by using Laue lenses. The first lens prototype model has been assembled and tested. We describe the technique adopted and the lens focusing capabilities at about 100 keV. △ Less

Submitted 9 July, 2008; originally announced July 2008.

Comments: 8 pages 9 figures, to be published in SPIE Procs. 7011, 2008

Development status of a Laue lens project for gamma-ray astronomy

Authors: F. Frontera, G. Loffredo, A. Pisa, L. Milani, F. Nobili, N. Auricchio, V. Carassiti, F. Evangelisti, L. Landi, S. Squerzanti, K. H. Andersen, P. Courtois, L. Amati, E. Caroli, G. Landini, S. Silvestri, J. B. Stephen, J. M. Poulsen, B. Negri, G. Pareschi

Abstract: We report the status of the HAXTEL project, devoted to perform a design study and the development of a Laue lens prototype. After a summary of the major results of the design study, the approach adopted to develop a Demonstration Model of a Laue lens is discussed, the set up described, and some results presented. We report the status of the HAXTEL project, devoted to perform a design study and the development of a Laue lens prototype. After a summary of the major results of the design study, the approach adopted to develop a Demonstration Model of a Laue lens is discussed, the set up described, and some results presented. △ Less

Submitted 7 December, 2007; originally announced December 2007.

Comments: 11 pages, 11 figures, 2007 SPIE Conference on Optics for EUV, X-Ray, and Gamma-Ray Astronomy III

Journal ref: Proc.SPIE Int.Soc.Opt.Eng.6688:66880N,2007

Gamma-ray lens development status for a European Gamma-Ray Imager

Authors: F. Frontera, A. Pisa, V. Carassiti, F. Evangelisti, G. Loffredo, D. Pellicciotta, K. H. Andersen, P. Courtois, L. Amati, E. Caroli, T. Franceschini, G. Landini, S. Silvestri, J. B. Stephen

Abstract: A breakthrough in the sensitivity level of the hard X-/gamma-ray telescopes, which today are based on detectors that view the sky through (or not) coded masks, is expected when focusing optics will be available also in this energy range. Focusing techniques are now in an advanced stage of development. To date the most efficient technique to focus hard X-rays with energies above 100 keV appears t… ▽ More A breakthrough in the sensitivity level of the hard X-/gamma-ray telescopes, which today are based on detectors that view the sky through (or not) coded masks, is expected when focusing optics will be available also in this energy range. Focusing techniques are now in an advanced stage of development. To date the most efficient technique to focus hard X-rays with energies above 100 keV appears to be the Bragg diffraction from crystals in transmission configuration (Laue lenses). Crystals with mosaic structure appear to be the most suitable to build a Laue lens with a broad passband, even though other alternative structures are being investigated. The goal of our project is the development of a broad band focusing telescope based on gamma-ray lenses for the study of the continuum emission of celestial sources from 60 keV up to >600 keV. We will report details of our project, its development status and results of our assessment study of a lens configuration for the European Gamma Ray Imager (GRI) mission now under study for the ESA plan "Cosmic Vision 2015-2025". △ Less

Submitted 15 November, 2006; originally announced November 2006.

Comments: 12 pages, 12 figures

Journal ref: Proc.SPIE Int.Soc.Opt.Eng. 6266 (2006) 64

Conductance Quantization in Schottky-gated Si/SiGe Quantum Point Contacts

Authors: G. Scappucci, L. Di Gaspare, E. Giovine, A. Notargiacomo, R. Leoni, F. Evangelisti

Abstract: We report on the fabrication and electronic transport characterisation of Schottky-gated strongly confined Si/SiGe quantum point contacts (QPC). At zero magnetic field and T=450mK the QPC conductance as a function of gate voltage shows a quantization in units of e^2/h, indicative of transport through 1D modes which appear to lack both spin and valley degeneracy. We report on the fabrication and electronic transport characterisation of Schottky-gated strongly confined Si/SiGe quantum point contacts (QPC). At zero magnetic field and T=450mK the QPC conductance as a function of gate voltage shows a quantization in units of e^2/h, indicative of transport through 1D modes which appear to lack both spin and valley degeneracy. △ Less

Submitted 5 September, 2006; originally announced September 2006.

Comments: 2 pages, 2 figure, to be published in Proc. ICPS-28

Conductance quantization in etched Si/SiGe quantum point contacts

Authors: G. Scappucci, L. Di Gaspare, E. Giovine, A. Notargiacomo, R. Leoni, F. Evangelisti

Abstract: We fabricated strongly confined Schottky-gated quantum point contacts by etching Si/SiGe heterostructures and observed intriguing conductance quantization in units of approximately 1e2/h. Non-linear conductance measurements were performed depleting the quantum point contacts at fixed mode-energy separation. We report evidences of the formation of a half 1e2/h plateau, supporting the speculation… ▽ More We fabricated strongly confined Schottky-gated quantum point contacts by etching Si/SiGe heterostructures and observed intriguing conductance quantization in units of approximately 1e2/h. Non-linear conductance measurements were performed depleting the quantum point contacts at fixed mode-energy separation. We report evidences of the formation of a half 1e2/h plateau, supporting the speculation that adiabatic transmission occurs through 1D modes with complete removal of valley and spin degeneracies. △ Less

Submitted 21 June, 2006; v1 submitted 16 December, 2005; originally announced December 2005.

Comments: to appear in Physical Review B

Exploring the Hard X-/soft gamma-ray Continuum Spectra with Laue Lenses

Authors: F. Frontera, A. Pisa, P. De Chiara, G. Loffredo, D. Pellicciotta, V. Carassiti, F. Evangelisti, K. Andersen, P. Courtois, B. Hamelin, L. Amati, N. Auricchio, L. Bassani, E. Caroli, G. Landini, M. Orlandini, J. B. Stephen, A. Comastri, J. Knodlseder, P. von Ballmoos

Abstract: The history of X-ray astronomy has shown that any advancement in our knowledge of the X-ray sky is strictly related to an increase in instrument sensitivity. At energies above 60 keV, there are interesting prospects for greatly improving the limiting sensitivity of the current generation of direct viewing telescopes (with or without coded masks), offered by the use of Laue lenses. We will discus… ▽ More The history of X-ray astronomy has shown that any advancement in our knowledge of the X-ray sky is strictly related to an increase in instrument sensitivity. At energies above 60 keV, there are interesting prospects for greatly improving the limiting sensitivity of the current generation of direct viewing telescopes (with or without coded masks), offered by the use of Laue lenses. We will discuss below the development status of a Hard X-Ray focusing Telescope (HAXTEL) based on Laue lenses with a broad bandpass (from 60 to 600 keV) for the study of the X-ray continuum of celestial sources. We show two examplesof multi-lens configurations with expected sensitivity orders of magnitude better ($\sim 1 \times 10^{-8}$ photons cm$^{-2}$ s$^{-1}$ keV$^{-1}$ at 200 keV) than that achieved so far. With this unprecedented sensitivity, very exciting astrophysical prospects are opened. △ Less

Submitted 7 July, 2005; originally announced July 2005.

Comments: 4 pages, 10 figures, to be published in the Proc. of the 39th ESLAB Symosium, 19-21 April 2005

Low field magnetotransport in strained Si/SiGe cavities

Authors: G. Scappucci, L. Di Gaspare, F. Evangelisti, E. Giovine, A. Notargiacomo, R. Leoni, V. Piazza, P. Pingue, F. Beltram

Abstract: Low field magnetotransport revealing signatures of ballistic transport effects in strained Si/SiGe cavities is investigated. We fabricated strained Si/SiGe cavities by confining a high mobility Si/SiGe 2DEG in a bended nanowire geometry defined by electron-beam lithography and reactive ion etching. The main features observed in the low temperature magnetoresistance curves are the presence of a z… ▽ More Low field magnetotransport revealing signatures of ballistic transport effects in strained Si/SiGe cavities is investigated. We fabricated strained Si/SiGe cavities by confining a high mobility Si/SiGe 2DEG in a bended nanowire geometry defined by electron-beam lithography and reactive ion etching. The main features observed in the low temperature magnetoresistance curves are the presence of a zero-field magnetoresistance peak and of an oscillatory structure at low fields. By adopting a simple geometrical model we explain the oscillatory structure in terms of electron magnetic focusing. A detailed examination of the zero-field peak lineshape clearly shows deviations from the predictions of ballistic weak localization theory. △ Less

Submitted 16 November, 2004; originally announced November 2004.

Comments: Submitted to Physical Review B, 25 pages, 7 figures