-
In vivo stiffness measurement of epidermis, dermis, and hypodermis using broadband Rayleigh-wave optical coherence elastography
Authors:
Xu Feng,
Guo-Yang Li,
Antoine Ramier,
Amira M. Eltony,
Seok-Hyun Yun
Abstract:
Traveling-wave optical coherence elastography (OCE) is a promising technique to measure the stiffness of biological tissues. While OCE has been applied to relatively homogeneous samples, tissues with significantly varying elasticity through depth pose a challenge, requiring depth-resolved measurement with sufficient resolution and accuracy. Here, we develop a broadband Rayleigh-wave OCE technique…
▽ More
Traveling-wave optical coherence elastography (OCE) is a promising technique to measure the stiffness of biological tissues. While OCE has been applied to relatively homogeneous samples, tissues with significantly varying elasticity through depth pose a challenge, requiring depth-resolved measurement with sufficient resolution and accuracy. Here, we develop a broadband Rayleigh-wave OCE technique capable of measuring the elastic moduli of the 3 major skin layers (epidermis, dermis, and hypodermis) reliably by analyzing the dispersion of leaky Rayleigh surface waves over a wide frequency range of 0.1-10 kHz. We show that a previously unexplored, high frequency range of 4-10 kHz is critical to resolve the thin epidermis, while a low frequency range of 0.2-1 kHz is adequate to probe the dermis and deeper hypodermis. We develop a dual bilayer-based inverse model to determine the elastic moduli in all 3 layers and verify its high accuracy with finite element analysis and skin-mimicking phantoms. Finally, the technique is applied to measure the forearm skin of healthy volunteers. The Young's modulus of the epidermis (including the stratum corneum) is measured to be ~ 4 MPa at 4-10 kHz, whereas Young's moduli of the dermis and hypodermis are about 40 and 15 kPa, respectively, at 0.2-1 kHz. Besides dermatologic applications, this method may be useful for the mechanical analysis of various other layered tissues with sub-mm depth resolution.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Measuring mechanical anisotropy of the cornea with Brillouin microscopy
Authors:
Amira M. Eltony,
Peng Shao,
Seok-Hyun Yun
Abstract:
Load-bearing tissues are typically fortified by networks of protein fibers, often with preferential orientations. This fiber structure imparts the tissues with direction-dependent mechanical properties optimized to support specific external loads. To accurately model and predict tissues' mechanical response, it is essential to characterize the anisotropy on a microstructural scale. Previously, it…
▽ More
Load-bearing tissues are typically fortified by networks of protein fibers, often with preferential orientations. This fiber structure imparts the tissues with direction-dependent mechanical properties optimized to support specific external loads. To accurately model and predict tissues' mechanical response, it is essential to characterize the anisotropy on a microstructural scale. Previously, it has been difficult to measure the mechanical properties of intact tissues noninvasively. Here, we use Brillouin optical microscopy to visualize and quantify the anisotropic mechanical properties of corneal tissues at different length scales. We derive the stiffness tensor for a lamellar network of collagen fibrils and use angle-resolved Brillouin measurements to determine the longitudinal stiffness coefficients (longitudinal moduli) describing the ex vivo porcine cornea as a transverse isotropic material. Lastly, we observe significant mechanical anisotropy of the human cornea in vivo, highlighting the potential for clinical applications of off-axis Brillouin microscopy.
△ Less
Submitted 1 March, 2022; v1 submitted 9 March, 2020;
originally announced March 2020.
-
Spatially-resolved Brillouin spectroscopy reveals biomechanical changes in early ectatic corneal disease and post-crosslinking in vivo
Authors:
Peng Shao,
Amira M. Eltony,
Theo G. Seiler,
Behrouz Tavakol,
Roberto Pineda,
Tobias Koller,
Theo Seiler,
Seok-Hyun Yun
Abstract:
Mounting evidence connects the biomechanical properties of tissues to the development of eye diseases such as keratoconus, a common disease in which the cornea thins and bulges into a conical shape. However, measuring biomechanical changes in vivo with sufficient sensitivity for disease detection has proved challenging. Here, we present a first large-scale study (~200 subjects, including normal an…
▽ More
Mounting evidence connects the biomechanical properties of tissues to the development of eye diseases such as keratoconus, a common disease in which the cornea thins and bulges into a conical shape. However, measuring biomechanical changes in vivo with sufficient sensitivity for disease detection has proved challenging. Here, we present a first large-scale study (~200 subjects, including normal and keratoconus patients) using Brillouin light-scattering microscopy to measure longitudinal modulus in corneal tissues with high sensitivity and spatial resolution. Our results in vivo provide evidence of biomechanical inhomogeneity at the onset of keratoconus and suggest that biomechanical asymmetry between the left and right eyes may presage disease development. We additionally measure the stiffening effect of corneal crosslinking treatment in vivo for the first time. Our results demonstrate the promise of Brillouin microscopy for diagnosis and treatment of keratoconus, and potentially other diseases.
△ Less
Submitted 3 February, 2018;
originally announced February 2018.
-
Technologies for trapped-ion quantum information systems
Authors:
Amira M. Eltony,
Dorian Gangloff,
Molu Shi,
Alexei Bylinskii,
Vladan Vuletić,
Isaac L. Chuang
Abstract:
Scaling-up from prototype systems to dense arrays of ions on chip, or vast networks of ions connected by photonic channels, will require developing entirely new technologies that combine miniaturized ion trapping systems with devices to capture, transmit and detect light, while refining how ions are confined and controlled. Building a cohesive ion system from such diverse parts involves many chall…
▽ More
Scaling-up from prototype systems to dense arrays of ions on chip, or vast networks of ions connected by photonic channels, will require developing entirely new technologies that combine miniaturized ion trapping systems with devices to capture, transmit and detect light, while refining how ions are confined and controlled. Building a cohesive ion system from such diverse parts involves many challenges, including navigating materials incompatibilities and undesired coupling between elements. Here, we review our recent efforts to create scalable ion systems incorporating unconventional materials such as graphene and indium tin oxide, integrating devices like optical fibers and mirrors, and exploring alternative ion loading and trapping techniques.
△ Less
Submitted 23 March, 2016; v1 submitted 19 February, 2015;
originally announced February 2015.
-
Ion traps fabricated in a CMOS foundry
Authors:
K. K. Mehta,
A. M. Eltony,
C. D. Bruzewicz,
I. L. Chuang,
R. J. Ram,
J. M. Sage,
J. Chiaverini
Abstract:
We demonstrate trapping in a surface-electrode ion trap fabricated in a 90-nm CMOS (complementary metal-oxide-semiconductor) foundry process utilizing the top metal layer of the process for the trap electrodes. The process includes doped active regions and metal interconnect layers, allowing for co-fabrication of standard CMOS circuitry as well as devices for optical control and measurement. With…
▽ More
We demonstrate trapping in a surface-electrode ion trap fabricated in a 90-nm CMOS (complementary metal-oxide-semiconductor) foundry process utilizing the top metal layer of the process for the trap electrodes. The process includes doped active regions and metal interconnect layers, allowing for co-fabrication of standard CMOS circuitry as well as devices for optical control and measurement. With one of the interconnect layers defining a ground plane between the trap electrode layer and the p-type doped silicon substrate, ion loading is robust and trapping is stable. We measure a motional heating rate comparable to those seen in surface-electrode traps of similar size. This is the first demonstration of scalable quantum computing hardware, in any modality, utilizing a commercial CMOS process, and it opens the door to integration and co-fabrication of electronics and photonics for large-scale quantum processing in trapped-ion arrays.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Transparent ion trap with integrated photodetector
Authors:
Amira M. Eltony,
Shannon X. Wang,
Gleb M. Akselrod,
Peter F. Herskind,
Isaac L. Chuang
Abstract:
Fluorescence collection sets the efficiency of state detection and the rate of entanglement generation between remote trapped ion qubits. Despite efforts to improve light collection using various optical elements, solid angle capture is limited to ~10% for implementations that are scalable to many ions. We present an approach based on fluorescence detection through a transparent trap using an inte…
▽ More
Fluorescence collection sets the efficiency of state detection and the rate of entanglement generation between remote trapped ion qubits. Despite efforts to improve light collection using various optical elements, solid angle capture is limited to ~10% for implementations that are scalable to many ions. We present an approach based on fluorescence detection through a transparent trap using an integrated photodetector, combining collection efficiency approaching 50% with scalability. We microfabricate transparent surface traps with indium tin oxide and verify stable trapping of single ions. The fluorescence from a cloud of ions is detected using a photodiode sandwiched with a transparent trap.
△ Less
Submitted 9 January, 2013; v1 submitted 6 December, 2012;
originally announced December 2012.
