-
Forced motion of a cylinder within a liquid-filled elastic tube
Authors:
Amit Vurgaft,
Shai B. Elbaz,
Amir D. Gat
Abstract:
This work analyzes the viscous flow and elastic deformation created by the forced axial motion of a rigid cylinder within an elastic liquid-filled tube. The examined configuration is relevant to various minimally invasive medical procedures in which slender devices are inserted into fluid-filled biological vessels, such as percutaneous revascularization, interventional radiology, endoscopies and c…
▽ More
This work analyzes the viscous flow and elastic deformation created by the forced axial motion of a rigid cylinder within an elastic liquid-filled tube. The examined configuration is relevant to various minimally invasive medical procedures in which slender devices are inserted into fluid-filled biological vessels, such as percutaneous revascularization, interventional radiology, endoscopies and catheterization. By applying the lubrication approximation, thin shell elastic model, as well as scaling analysis and regular and singular asymptotic schemes, the problem is examined for small and large deformation limits (relative to the gap between the cylinder and the tube). At the limit of large deformations, forced insertion of the cylinder is shown to involve three distinct regimes and time-scales: (i) initial shear dominant regime, (ii) intermediate regime of dominant fluidic pressure and a propagating viscous-peeling front, (iii) late-time quasi-steady flow regime of the fully peeled tube. A uniform solution for all regimes is presented for a suddenly applied constant force, showing initial deceleration and then acceleration of the inserted cylinder. For the case of forced extraction of the cylinder from the tube, the negative gauge pressure reduces the gap between the cylinder and the tube, increasing viscous resistance or creating friction due to contact of the tube and cylinder. Matched asymptotic schemes are used to calculate the dynamics of the near-contact and contact limits. We find that the cylinder exits the tube in a finite time for sufficiently small or large forces. However, for an intermediate range of forces the radial contact creates a steady locking of the cylinder inside the tube.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Dynamics and instabilities of an arbitrarily clamped elastic sheet in potential flow with application to shape-morphing airfoils
Authors:
Netanel Hassan,
Shai B. Elbaz,
Amir D. Gat
Abstract:
The aim of this work is to study the dynamics and stability of soft shape-morphing configurations and specifically the modes of interaction between the front and rear airfoil segments. Initially we present several steady-state solutions, such as canceling of deflection due to aerodynamic forces and transition between two predefined cambers via continuous actuation of the airfoil. The steady result…
▽ More
The aim of this work is to study the dynamics and stability of soft shape-morphing configurations and specifically the modes of interaction between the front and rear airfoil segments. Initially we present several steady-state solutions, such as canceling of deflection due to aerodynamic forces and transition between two predefined cambers via continuous actuation of the airfoil. The steady results are validated by numerical calculations based on commercially available software. We then examine stability and transient dynamics by assuming small deflections and applying multiple-scale analysis to obtain a stability condition. The condition is attained via the compatibility equations of the orthogonal spatial modes of the first-order correction. The results yield the maximal stable speed as a function of elastic damping, fluid density and location of clamping. The results show that the interaction between the front and rear segments is the dominant mechanism for instability for various discrete locations of clamping. Instabilities due to interaction dynamics between the front and rear segments become more significant as the location of clamping approaches the leading edge. Several transient dynamics are presented for stable and unstable configurations, as well as instability dynamics initiated by cyclic actuation at the natural frequency of the airfoil.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Gaseous viscous peeling of linearly elastic substrates
Authors:
Shai B. Elbaz,
Hila Jacob,
Amir D. Gat
Abstract:
We study pressure-driven propagation of gas into a micron-scale gap between two linearly elastic substrates. Applying the lubrication approximation, the flow-field is governed by the interaction between elasticity and viscosity, as well as weak rarefaction and low-Mach-compressibility, characteristic to gaseous microflows. Several physical limits allow simplification of the governing evolution equ…
▽ More
We study pressure-driven propagation of gas into a micron-scale gap between two linearly elastic substrates. Applying the lubrication approximation, the flow-field is governed by the interaction between elasticity and viscosity, as well as weak rarefaction and low-Mach-compressibility, characteristic to gaseous microflows. Several physical limits allow simplification of the governing evolution equation and enable solution by self-similarity. These limits correspond to different time-scales and physical regimes which include compressiblity-elasticity-viscosity, compressiblity-viscosity and elasticity-viscosity dominant balances. For a prewetting layer thickness which is similar to the elastic deformation generated by the background pressure, a symmetry between compressibility and elasticity allows to obtain a self-similar solution which includes weak rarefaction effects. The results are validated by numerical solutions of the evolution equation
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
-
Axial Creeping Flow in the Gap between a Rigid Cylinder and a Concentric Elastic Tube
Authors:
Shai B. Elbaz,
Amir D. Gat
Abstract:
We examine transient axial creeping flow in the annular gap between a rigid cylinder and a concentric elastic tube. The gap is initially filled with a thin fluid layer. The study focuses on viscous-elastic time-scales for which the rate of solid deformation is of the same order-of-magnitude as the velocity of the fluid. We employ an elastic shell model and the lubrication approximation to obtain a…
▽ More
We examine transient axial creeping flow in the annular gap between a rigid cylinder and a concentric elastic tube. The gap is initially filled with a thin fluid layer. The study focuses on viscous-elastic time-scales for which the rate of solid deformation is of the same order-of-magnitude as the velocity of the fluid. We employ an elastic shell model and the lubrication approximation to obtain a forced nonlinear diffusion equation governing the viscous-elastic interaction. In the case of an advancing liquid front into a configuration with a negligible film layer (compared with the radial deformation of the elastic tube), the governing equation degenerates into a forced porous medium equation, for which several closed-form solutions are presented. In the case where the initial film layer is non-negligible, self-similarity is used to devise propagation laws for a pressure driven liquid front. When advancing external forces are applied on the tube, the formation of dipole structures is shown to dominate the initial stages of the induced flow and deformation regimes. These are variants of the dipole solution of the porous medium equation. Finally, since the rate of pressure propagation decreases with the height of the liquid film, we show that isolated moving deformation patterns can be created and superimposed to generate a moving wave-like deformation field. The presented interaction between viscosity and elasticity may be applied to fields such as soft-robotics and micro-scale or larger swimmers by allowing for the time-dependent control of an axisymmetric compliant boundary.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
