-
A Novel Algorithm for Digital Lithological Mapping-Case Studies in Sri Lanka's Mineral Exploration
Authors:
R. M. L. S. Ramanayake,
D. C. Dammage,
I. Z. M. Zumri,
K. A. R. S. Rodrigo,
A. A. P. Perera,
D. Fernando,
G. M. R. I. Godaliyadda,
H. M. V. R. Herath,
M. P. B. Ekanayake,
A. Senaratne,
Fadi Kizel
Abstract:
Conventional manual lithological mapping (MLM) through field surveys are resource-extensive and time-consuming. Digital lithological mapping (DLM), harnessing remotely sensed spectral imaging techniques, provides an effective strategy to streamline target locations for MLM or an efficient alternative to MLM. DLM relies on laboratory-generated generic end-member signatures of minerals for spectral…
▽ More
Conventional manual lithological mapping (MLM) through field surveys are resource-extensive and time-consuming. Digital lithological mapping (DLM), harnessing remotely sensed spectral imaging techniques, provides an effective strategy to streamline target locations for MLM or an efficient alternative to MLM. DLM relies on laboratory-generated generic end-member signatures of minerals for spectral analysis. Thus, the accuracy of DLM may be limited due to the presence of site-specific impurities. A strategy, based on a hybrid machine-learning and signal-processing algorithm, is proposed in this paper to tackle this problem of site-specific impurities. In addition, a soil pixel alignment strategy is proposed here to visualize the relative purity of the target minerals. The proposed methodologies are validated via case studies for mapping of Limestone deposits in Jaffna, Ilmenite deposits in Pulmoddai and Mannar, and Montmorillonite deposits in Murunkan, Sri Lanka. The results of satellite-based spectral imaging analysis were corroborated with X-ray diffraction (XRD) and Magnetic Separation (MS) analysis of soil samples collected from those sites via field surveys. There exists a good correspondence between the relative availability of the minerals with the XRD and MS results. In particular, correlation coefficients of 0.8115 and 0.9853 were found for the sites in Pulmoddai and Jaffna respectively.
△ Less
Submitted 5 May, 2024; v1 submitted 31 March, 2024;
originally announced April 2024.
-
Iso-Diffusion: Improving Diffusion Probabilistic Models Using the Isotropy of the Additive Gaussian Noise
Authors:
Dilum Fernando,
Shakthi Perera,
H. M. P. S. Madushan,
H. L. P. Malshan,
Roshan Godaliyadda,
M. P. B. Ekanayake,
H. M. V. R. Herath,
Dhananjaya Jayasundara,
Chaminda Bandara
Abstract:
Denoising Diffusion Probabilistic Models (DDPMs) have accomplished much in the realm of generative AI. With the tremendous level of popularity the Generative AI algorithms have achieved, the demand for higher levels of performance continues to increase. Under this backdrop, careful scrutinization of algorithm performance under sample fidelity type measures is essential to ascertain how, effectivel…
▽ More
Denoising Diffusion Probabilistic Models (DDPMs) have accomplished much in the realm of generative AI. With the tremendous level of popularity the Generative AI algorithms have achieved, the demand for higher levels of performance continues to increase. Under this backdrop, careful scrutinization of algorithm performance under sample fidelity type measures is essential to ascertain how, effectively, the underlying structures of the data distribution were learned. In this context, minimizing the mean squared error between the additive and predicted noise alone does not impose structural integrity constraints on the predicted noise, for instance, isotropic. Under this premise, we were motivated to utilize the isotropy of the additive noise as a constraint on the objective function to enhance the fidelity of DDPMs. Our approach is simple and can be applied to any DDPM variant. We validate our approach by presenting experiments conducted on four synthetic 2D datasets as well as on unconditional image generation. As demonstrated by the results, the incorporation of this constraint improves the fidelity metrics, Precision and Density, and the results clearly indicate how the structural imposition was effective.
△ Less
Submitted 27 November, 2024; v1 submitted 25 March, 2024;
originally announced March 2024.
-
Transformer based Endmember Fusion with Spatial Context for Hyperspectral Unmixing
Authors:
R. M. K. L. Ratnayake,
D. M. U. P. Sumanasekara,
H. M. K. D. Wickramathilaka,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
H. M. V. R. Herath
Abstract:
In recent years, transformer-based deep learning networks have gained popularity in Hyperspectral (HS) unmixing applications due to their superior performance. The attention mechanism within transformers facilitates input-dependent weighting and enhances contextual awareness during training. Drawing inspiration from this, we propose a novel attention-based Hyperspectral Unmixing algorithm called T…
▽ More
In recent years, transformer-based deep learning networks have gained popularity in Hyperspectral (HS) unmixing applications due to their superior performance. The attention mechanism within transformers facilitates input-dependent weighting and enhances contextual awareness during training. Drawing inspiration from this, we propose a novel attention-based Hyperspectral Unmixing algorithm called Transformer-based Endmember Fusion with Spatial Context for Hyperspectral Unmixing (FusionNet). This network leverages an ensemble of endmembers for initial guidance, effectively addressing the issue of relying on a single initialization. This approach helps avoid suboptimal results that many algorithms encounter due to their dependence on a singular starting point. The FusionNet incorporates a Pixel Contextualizer (PC), introducing contextual awareness into abundance prediction by considering neighborhood pixels. Unlike Convolutional Neural Networks (CNNs) and traditional Transformer-based approaches, which are constrained by specific kernel or window shapes, the Fusion network offers flexibility in choosing any arbitrary configuration of the neighborhood. We conducted a comparative analysis between the FusionNet algorithm and eight state-of-the-art algorithms using three widely recognized real datasets and one synthetic dataset. The results demonstrate that FusionNet offers competitive performance compared to the other algorithms.
△ Less
Submitted 31 July, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Dual mode multispectral imaging system for food and agricultural product quality estimation
Authors:
Darsha Udayanga,
Ashan Serasinghe,
Supun Dassanayake,
Roshan Godaliyadda,
H. M. V. R. Herath,
M. P. B. Ekanayake,
H. L. P. Malshan
Abstract:
Multispectral imaging coupled with Artificial Intelligence, Machine Learning and Signal Processing techniques work as a feasible alternative for laboratory testing, especially in food quality control. Most of the recent related research has been focused on reflectance multispectral imaging but a system with both reflectance, transmittance capabilities would be ideal for a wide array of specimen ty…
▽ More
Multispectral imaging coupled with Artificial Intelligence, Machine Learning and Signal Processing techniques work as a feasible alternative for laboratory testing, especially in food quality control. Most of the recent related research has been focused on reflectance multispectral imaging but a system with both reflectance, transmittance capabilities would be ideal for a wide array of specimen types including solid and liquid samples. In this paper, a device which includes a dedicated reflectance mode and a dedicated transmittance mode is proposed. Dual mode operation where fast switching between two modes is facilitated. An innovative merged mode is introduced in which both reflectance and transmittance information of a specimen are combined to form a higher dimensional dataset with more features. Spatial and temporal variations of measurements are analyzed to ensure the quality of measurements. The concept is validated using a standard color palette and specific case studies are done for standard food samples such as turmeric powder and coconut oil proving the validity of proposed contributions. The classification accuracy of standard color palette testing was over 90% and the accuracy of coconut oil adulteration was over 95%. while the merged mode was able to provide the best accuracy of 99% for the turmeric adulteration. A linear functional mapping was done for coconut oil adulteration with an R2 value of 0.9558.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Object Dimension Extraction for Environment Mapping with Low Cost Cameras Fused with Laser Ranging
Authors:
E. M. S. P. Ekanayake,
T. H. M. N. C. Thelasingha,
U. V. B. L. Udugama,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
B. G. L. T. Samaranayake,
J. V. Wijayakulasooriya
Abstract:
It is essential to have a method to map an unknown terrain for various applications. For places where human access is not possible, a method should be proposed to identify the environment. Exploration, disaster relief, transportation and many other purposes would be convenient if a map of the environment is available. Replicating the human vision system using stereo cameras would be an optimum sol…
▽ More
It is essential to have a method to map an unknown terrain for various applications. For places where human access is not possible, a method should be proposed to identify the environment. Exploration, disaster relief, transportation and many other purposes would be convenient if a map of the environment is available. Replicating the human vision system using stereo cameras would be an optimum solution. In this work, we have used laser ranging based technique fused with stereo cameras to extract dimension of objects for mapping. The distortions were calibrated using mathematical model of the camera. By means of Semi Global Block Matching [1] disparity map was generated and reduces the noise using novel noise reduction method of disparity map by dilation. The Data from the Laser Range Finder (LRF) and noise reduced vision data has been used to identify the object parameters.
△ Less
Submitted 31 January, 2023;
originally announced February 2023.
-
Laser Ranging Based Intelligent System for Unknown Environment Mapping
Authors:
T. H. M. N. C. Thelasingha,
U. V. B. L. Udugama,
E. M. S. P. Ekanayake,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
B. G. L. T. Samaranayake,
J. V. Wijayakulasooriya
Abstract:
This work describes the implementation of a simple and computationally efficient Intelligent Navigation System (INS) for autonomous systems used in areas where human access is impossible. The system uses Laser Range Finder (LRF) readings as input, making it suitable for mobile platform implementation. The INS pre-processes the LRF readings to remove noise and determines an obstacle-free path for m…
▽ More
This work describes the implementation of a simple and computationally efficient Intelligent Navigation System (INS) for autonomous systems used in areas where human access is impossible. The system uses Laser Range Finder (LRF) readings as input, making it suitable for mobile platform implementation. The INS pre-processes the LRF readings to remove noise and determines an obstacle-free path for mapping. The system's localization method uses a similarity transform and particle filter. The system was tested in artificially generated environments and emulated in real-time with real-environment data. The system was then implemented in a Raspberry Pi3 on a 3WD Omni-directional mobile platform and tested in real environments. The system was able to generate an accurate 2D map of the area. The proposed methodology was shown to be efficient through a comparative analysis of execution time.
△ Less
Submitted 31 January, 2023;
originally announced February 2023.
-
Single-target mineral detection with site-specific endmember extraction for survey points identification: A case study of Jaffna, Sri Lanka
Authors:
D. Y. L. Ranasinghe,
H. M. H. K. Weerasooriya,
S. Herath,
H. M. V. R. Herath,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
A. Senaratne,
S. L. P. Yasakethu
Abstract:
As field surveys used for manual lithological mapping are costly and time-consuming, digital lithological mapping (DLM) that utilizes remotely sensed spectral imaging provides a viable and economical alternative. Generally, DLM has been performed using spectral imaging with the use of laboratory-generated generic endmember signatures. To that end, this paper proposes generating a single-target abu…
▽ More
As field surveys used for manual lithological mapping are costly and time-consuming, digital lithological mapping (DLM) that utilizes remotely sensed spectral imaging provides a viable and economical alternative. Generally, DLM has been performed using spectral imaging with the use of laboratory-generated generic endmember signatures. To that end, this paper proposes generating a single-target abundance mineral map for DLM, where the generated map can further be used as a guide for the selection or avoidance of a field survey. For that, a stochastic cancellation-based methodology was used to generate a site-specific endemic signature for the mineral in concern to reduce the inclusive nature otherwise present in DLM. Furthermore, a soil pixel alignment strategy to visualize the relative purity level of the target mineral has been introduced in the proposed work. Then, for the method validation, mapping of limestone deposits in the Jaffna peninsula of Sri Lanka was conducted as the case study using satellite-based spectral imaging as the input. It was observed that despite the low signal-to-noise ratio of the input hyperspectral data the proposed methodology was able to robustly extract the rich information contained in the input data. Further, a field survey was conducted to collect soil samples of four sites chosen by the proposed DLM from the Jaffna peninsula as an algorithm validation and to demonstrate the application of the proposed solution. The proposed abundance threshold of 0.1 coincided with the industrial standard X-ray diffraction (XRD) threshold of 5% for the mineral presence. The results of the XRD test validated the use of the algorithm in the selection of sites to be surveyed, hence could avoid conducting a costly field survey on the assumption of the existence of a mineral.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Transmittance Multispectral Imaging for Reheated Coconut Oil Differentiation
Authors:
D. Y. L. Ranasinghe,
H. M. H. K. Weerasooriya,
S. Herath,
M. P. B. Ekanayake,
H. M. V. R. Herath,
G. M. R. I. Godaliyadda,
T. Madhujith
Abstract:
Oil reheating has a significant impact on global health due to its extensive consumption, especially in South Asia, and severe health risks. Nevertheless, food image analysis using multispectral imaging systems(MISs) has not been applied to oil reheating analysis despite their vast application in rapid food quality screening. To that end, the paper discusses the application of a low-cost MSI to es…
▽ More
Oil reheating has a significant impact on global health due to its extensive consumption, especially in South Asia, and severe health risks. Nevertheless, food image analysis using multispectral imaging systems(MISs) has not been applied to oil reheating analysis despite their vast application in rapid food quality screening. To that end, the paper discusses the application of a low-cost MSI to estimate the 'reheat cycle count classes' (number of times an oil sample is recursively heated) and identify 'critical classes' at which substantial changes in the oil sample have materialized. Firstly, the reheat cycle count class is estimated with Bhattacharyya distance between the reheated and a pure oil sample as the input. The classification was performed using a support vector machine classifier that resulted in an accuracy of 83.34 % for reheat cycle count identification. Subsequently, an unsupervised clustering procedure was introduced using a modified spectral clustering (SC) algorithm to distinguish critical classes under reheating. In addition, laboratory experiments were performed to ascertain the ramifications of the reheating process with a chemical analysis. The chemical analysis of the coconut oil samples used in the experiment coincided with the chemical analysis results and was statistically significant (p < 0.05). Accordingly, the proposed work closes the gap for using multispectral imaging for oil reheating and proposes a novel algorithm for unsupervised detection of critical property changes in the oil. Hence, the proposed research work is significant in its practical implications, contribution to food image analysis, and unsupervised classification mechanisms.
△ Less
Submitted 5 January, 2022; v1 submitted 28 August, 2021;
originally announced August 2021.
-
Quantitative Assessment of Adulteration and Reuse of Coconut Oil Using Transmittance Multispectral Imaging
Authors:
S. Herath,
H. K. Weerasooriya,
D. Y. L. Ranasinghe,
W. G. C. Bandara,
H. M. V. R. Herath,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
Terrence Madhujith
Abstract:
Coconut oil known for its wide range of uses is often adulterated with other edible oils. Repeated use of coconut oil in food preparation could lead to many health issues. Existing methods available for evaluating quality of oil are laborious and time consuming. Therefore, we propose an imaging system hardware and image processing-based algorithm to estimate the adulteration of coconut oil with pa…
▽ More
Coconut oil known for its wide range of uses is often adulterated with other edible oils. Repeated use of coconut oil in food preparation could lead to many health issues. Existing methods available for evaluating quality of oil are laborious and time consuming. Therefore, we propose an imaging system hardware and image processing-based algorithm to estimate the adulteration of coconut oil with palm oil as the adulterant. A clear functional relationship between adulteration level and Bhattacharyya distance was observed as R2 = 0.9876 on the training samples. Thereafter, another algorithm is proposed to develop a spectral-clustering based classifier to determine the effect of reheat and reuse of coconut oil. Distinct clusters were obtained for different levels of reheated oil classes and the classification was performed with an accuracy of 0.983 on training samples. Further, the input images for the proposed algorithms were generated using an in-house developed transmittance based multispectral imaging system.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Coordinated PV re-phasing: a novel method to maximize renewable energy integration in LV networks by mitigating network unbalances
Authors:
W. G. Chaminda Bandara,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
J. B. Ekanayake
Abstract:
As combating climate change has become a top priority and as many countries are taking steps to make their power generation sustainable, there is a marked increase in the use of renewable energy sources (RESs) for electricity generation. Among these RESs, solar photovoltaics (PV) is one of the most popular sources of energy connected to LV distribution networks. With the greater integration of sol…
▽ More
As combating climate change has become a top priority and as many countries are taking steps to make their power generation sustainable, there is a marked increase in the use of renewable energy sources (RESs) for electricity generation. Among these RESs, solar photovoltaics (PV) is one of the most popular sources of energy connected to LV distribution networks. With the greater integration of solar PV into LV distribution networks, utility providers impose caps to solar penetration in order to operate their network safely and within acceptable norms. One parameter that restricts solar PV penetration is unbalances created by loads and single-phase rooftop schemes connected to LV distribution grids. In this paper, a novel method is proposed to mitigate voltage unbalance in LV distribution grids by optimally re-phasing grid-connected rooftop PV systems. A modified version of the discrete bacterial foraging optimization algorithm (DBFOA) is introduced as the optimization technique to minimize the overall voltage unbalance of the network as the objective function, subjected to various network and operating parameters. The impact of utilizing the proposed PV re-phasing technique as opposed to a fixed phase configuration are compared based on overall voltage unbalance, which was observed hourly throughout the day. The case studies show that the proposed approach can significantly mitigate the overall voltage unbalance during the daytime and can facilitate to increase the usable PV capacity of the considered network by 77%.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Constrained Nonnegative Matrix Factorization for Blind Hyperspectral Unmixing incorporating Endmember Independence
Authors:
E. M. M. B. Ekanayake,
H. M. H. K. Weerasooriya,
D. Y. L. Ranasinghe,
S. Herath,
B. Rathnayake,
G. M. R. I. Godaliyadda,
M. P. B. Ekanayake,
H. M. V. R. Herath
Abstract:
Hyperspectral unmixing (HU) has become an important technique in exploiting hyperspectral data since it decomposes a mixed pixel into a collection of endmembers weighted by fractional abundances. The endmembers of a hyperspectral image (HSI) are more likely to be generated by independent sources and be mixed in a macroscopic degree before arriving at the sensor element of the imaging spectrometer…
▽ More
Hyperspectral unmixing (HU) has become an important technique in exploiting hyperspectral data since it decomposes a mixed pixel into a collection of endmembers weighted by fractional abundances. The endmembers of a hyperspectral image (HSI) are more likely to be generated by independent sources and be mixed in a macroscopic degree before arriving at the sensor element of the imaging spectrometer as mixed spectra. Over the past few decades, many attempts have focused on imposing auxiliary constraints on the conventional nonnegative matrix factorization (NMF) framework in order to effectively unmix these mixed spectra. As a promising step toward finding an optimum constraint to extract endmembers, this paper presents a novel blind HU algorithm, referred to as Kurtosis-based Smooth Nonnegative Matrix Factorization (KbSNMF) which incorporates a novel constraint based on the statistical independence of the probability density functions of endmember spectra. Imposing this constraint on the conventional NMF framework promotes the extraction of independent endmembers while further enhancing the parts-based representation of data. Experiments conducted on diverse synthetic HSI datasets (with numerous numbers of endmembers, spectral bands, pixels, and noise levels) and three standard real HSI datasets demonstrate the validity of the proposed KbSNMF algorithm compared to several state-of-the-art NMF-based HU baselines. The proposed algorithm exhibits superior performance especially in terms of extracting endmember spectra from hyperspectral data; therefore, it could uplift the performance of recent deep learning HU methods which utilize the endmember spectra as supervisory input data for abundance extraction.
△ Less
Submitted 7 August, 2021; v1 submitted 2 March, 2020;
originally announced March 2020.
