Showing 1–49 of 49 results for author: Edfors, O

Adaptive Attention-Based Model for 5G Radio-based Outdoor Localization

Authors: Ilayda Yaman, Guoda Tian, Dino Pjanic, Fredrik Tufvesson, Ove Edfors, Zhengya Zhang, Liang Liu

Abstract: Radio-based localization in dynamic environments, such as urban and vehicular settings, requires systems that efficiently adapt to varying signal conditions and environmental changes. Factors like multipath interference and obstructions introduce different levels of complexity that affect the accuracy of the localization. Although generalized models offer broad applicability, they often struggle t… ▽ More Radio-based localization in dynamic environments, such as urban and vehicular settings, requires systems that efficiently adapt to varying signal conditions and environmental changes. Factors like multipath interference and obstructions introduce different levels of complexity that affect the accuracy of the localization. Although generalized models offer broad applicability, they often struggle to capture the nuances of specific environments, leading to suboptimal performance in real-world deployments. In contrast, specialized models can be tailored to particular conditions, enabling more precise localization by effectively handling domain-specific variations, which also results in reduced execution time and smaller model size. However, deploying multiple specialized models requires an efficient mechanism to select the most appropriate one for a given scenario. In this work, we develop an adaptive localization framework that combines shallow attention-based models with a router/switching mechanism based on a single-layer perceptron. This enables seamless transitions between specialized localization models optimized for different conditions, balancing accuracy and computational complexity. We design three low-complex models tailored for distinct scenarios, and a router that dynamically selects the most suitable model based on real-time input characteristics. The proposed framework is validated using real-world vehicle localization data collected from a massive MIMO base station and compared to more general models. △ Less

Submitted 8 May, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: 6 pages, 6 figures

Accelerator-assisted Floating-point ASIP for Communication and Positioning in Massive MIMO Systems

Authors: Mohammad Attari, Ove Edfors, Liang Liu

Abstract: This paper presents an implementation of a floating-point-capable application-specific instruction set processor (ASIP) for both communication and positioning tasks using the massive multiple-input multiple-output (MIMO) technology. The ASIP is geared with vector processing capabilities in the form of single instruction multiple data (SIMD). A dual-pronged accelerator composition assists the proce… ▽ More This paper presents an implementation of a floating-point-capable application-specific instruction set processor (ASIP) for both communication and positioning tasks using the massive multiple-input multiple-output (MIMO) technology. The ASIP is geared with vector processing capabilities in the form of single instruction multiple data (SIMD). A dual-pronged accelerator composition assists the processor to tame the heavier mathematical workloads. A standalone systolic array accelerator accompanies the processor to aid with matrix multiplications. A parallel vector memory subsystem provides functionalities to both the processor and the systolic array. Additionally, A convolutional neural network (CNN) module accelerator, which is paired with its own separate vector memory, works hand in glove with the processor to take on the positioning task. The processor is synthesized in 22 nm fully depleted silicon-on-insulator (FD-SOI) technology running at a clock frequency of 800 MHz. The system achieves a maximum detection throughput of 2.1 Gb/s in a 128x16 massive MIMO system for the user equipment (UE) speed of 50km/h. The localization throughput settles at around 390 positionings/s. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Comments: 11 pages, 11 figures

Hardware Distortion Modeling for Panel Selection in Large Intelligent Surfaces

Authors: Ashkan Sheikhi, Juan Vidal Alegría, Ove Edfors

Abstract: Hardware distortion in large intelligent surfaces (LISs) may limit their performance when scaling up such systems. It is of great importance to model the non-ideal effects in their transceivers to study the hardware distortions that can affect their performance. Therefore, we have focused on modeling and studying the effects of nonlinear RX-chains in LISs. We first derive expressions for SNDR of a… ▽ More Hardware distortion in large intelligent surfaces (LISs) may limit their performance when scaling up such systems. It is of great importance to model the non-ideal effects in their transceivers to study the hardware distortions that can affect their performance. Therefore, we have focused on modeling and studying the effects of nonlinear RX-chains in LISs. We first derive expressions for SNDR of a LIS with a memory-less polynomial-based model at its RX-chains. Then we propose a simplified double-parameter exponential model for the distortion power and show that compared to the polynomial based model, the exponential model can improve the analytical tractability for SNDR optimization problems. In particular, we consider a panel selection optimization problems in a panel-based LIS scenario and show that the proposed model enables us to derive two closed-form sub-optimal solutions for panel selection, and can be a favorable alternative to high-order polynomial models in terms of computation complexity, especially for theoretical works on hardware distortion in MIMO and LIS systems. Numerical results show that the sub-optimal closed-form solutions have a near-optimal performance in terms of SNDR compared to the global optimum found by high-complexity heuristic search methods. △ Less

Submitted 22 January, 2025; originally announced January 2025.

Comments: 5 pages and 4 figures. This work has been accepted in IEEE Asilomar Conference on Signals, Systems, and Computers 2024. Copyright information may be affected upon publication in the IEEE Proceedings

Decentralized Multi-Antenna Architectures with Unitary Constraints

Authors: Juan Vidal Alegría, Ove Edfors

Abstract: The increase in the number of base station (BS) antennas calls for efficient solutions to deal with the increased interconnection bandwidth and processing complexity of traditional centralized approaches. Decentralized approaches are thus gaining momentum, since they achieve important reductions in data/processing volume by preprocessing the received signals before forwarding them to a central nod… ▽ More The increase in the number of base station (BS) antennas calls for efficient solutions to deal with the increased interconnection bandwidth and processing complexity of traditional centralized approaches. Decentralized approaches are thus gaining momentum, since they achieve important reductions in data/processing volume by preprocessing the received signals before forwarding them to a central node. The WAX framework offers a general description of decentralized architectures with arbitrary interplay between interconnection bandwidth and decentralized processing complexity, but the applicability of this framework has only been studied assuming unrestricted baseband processing. We consider an adaptation of the WAX framework where the decentralized processing has unitary restriction, which allows for energy-efficient implementations based on reconfigurable impedance networks at the cost of some performance loss. Moreover, we propose an effective method to minimize the performance gap with respect to centralized processing. The previous method gives a first step towards characterizing the information-lossless trade-off between interconnection bandwidth and processing complexity in decentralized architectures with unitary constraints. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: 5 pages, 1 figure (3 subfigures). This work has been presented at the Asilomar Conference on Signals, Systems, and Computers. Copyright information may be affected upon publication in the IEEE Proceedings

Spectrum Efficiency and Processing Latency Trade-offs in Panel-Based LIS

Authors: Lina Tinnerberg, Dumitra Iancu, Ove Edfors, Liang Liu, Juan Vidal Alegría

Abstract: The next generation wireless systems will face stringent new requirements, including ultra-low latency, high data rates and enhanced reliability. Large Intelligent Surfaces, is one proposed solution that has the potential to solve these high demands. The real-life deployment of such systems involves different design considerations with non-trivial trade-offs. This paper investigates the trade-off… ▽ More The next generation wireless systems will face stringent new requirements, including ultra-low latency, high data rates and enhanced reliability. Large Intelligent Surfaces, is one proposed solution that has the potential to solve these high demands. The real-life deployment of such systems involves different design considerations with non-trivial trade-offs. This paper investigates the trade-off between spectral efficiency and processing latency, considering different antenna distribution schemes and detection algorithms. A latency model for the physical layer processing has been developed with realistic hardware parameters. The simulation results using an in-door environment show that distributing the antennas throughout the scenario improves the overall reliability, while the impact on the latency is limited when zero-forcing (ZF) detection is used. On the other hand, changing the detection algorithm to maximum-ratio combining (MRC) may reduce the latency significantly, even if a larger number of antennas are needed to achieve a similar spectrum efficiency as ZF detection. △ Less

Submitted 28 November, 2024; originally announced November 2024.

Comments: This work has been submitted to the IEEE for possible publication, copyright information may be affected upon publication

Large Intelligent Surfaces with Low-End Receivers: From Scaling to Antenna and Panel Selection

Authors: Ashkan Sheikhi, Juan Vidal Alegría, Ove Edfors

Abstract: We analyze the performance of large intelligent surface (LIS) with hardware distortion at its RX-chains. In particular, we consider the memory-less polynomial model for non-ideal hardware and derive analytical expressions for the signal to noise plus distortion ratio after applying maximum ratio combining (MRC) at the LIS. We also study the effect of back-off and automatic gain control on the RX-c… ▽ More We analyze the performance of large intelligent surface (LIS) with hardware distortion at its RX-chains. In particular, we consider the memory-less polynomial model for non-ideal hardware and derive analytical expressions for the signal to noise plus distortion ratio after applying maximum ratio combining (MRC) at the LIS. We also study the effect of back-off and automatic gain control on the RX-chains. The derived expressions enable us to evaluate the scalability of LIS when hardware impairments are present. We also study the cost of assuming ideal hardware by analyzing the minimum scaling required to achieve the same performance with a non-ideal hardware. Then, we exploit the analytical expressions to propose optimized antenna selection schemes for LIS and we show that such schemes can improve the performance significantly. In particular, the antenna selection schemes allow the LIS to have lower number of non-ideal RX-chains for signal reception while maintaining a good performance. We also consider a more practical case where the LIS is deployed as a grid of multi-antenna panels, and we propose panel selection schemes to optimize the complexity-performance trade-offs and improve the system overall efficiency. △ Less

Submitted 6 April, 2025; v1 submitted 7 November, 2024; originally announced November 2024.

Comments: This work has been submitted to the IEEE for possible publication

Over-the-Air DPD and Reciprocity Calibration in Massive MIMO and Beyond

Authors: Ashkan Sheikhi, Ove Edfors, Juan Vidal Alegría

Abstract: In this paper we study an over-the-air (OTA) approach for digital pre-distortion (DPD) and reciprocity calibration in massive multiple-input-multiple-output systems. In particular, we consider a memory-less non-linearity model for the base station (BS) transmitters and propose a methodology to linearize the transmitters and perform the calibration by using mutual coupling OTA measurements between… ▽ More In this paper we study an over-the-air (OTA) approach for digital pre-distortion (DPD) and reciprocity calibration in massive multiple-input-multiple-output systems. In particular, we consider a memory-less non-linearity model for the base station (BS) transmitters and propose a methodology to linearize the transmitters and perform the calibration by using mutual coupling OTA measurements between BS antennas. We show that by only using the OTA-based data, we can linearize the transmitters and design the calibration to compensate for both the non-linearity and non-reciprocity of BS transceivers effectively. This allows to alleviate the requirement to have dedicated hardware modules for transceiver characterization. Moreover, exploiting the results of the DPD linearization step, our calibration method may be formulated in terms of closed-form transformations, achieving a significant complexity reduction over state-of-the-art methods, which usually rely on costly iterative computations. Simulation results showcase the potential of our approach in terms of the calibration matrix estimation error and downlink data-rates when applying zero-forcing precoding after using our OTA-based DPD and calibration method. △ Less

Submitted 6 April, 2025; v1 submitted 7 November, 2024; originally announced November 2024.

Comments: This work has been submitted to the IEEE for possible publication

Channel Orthogonalization in Panel-Based LIS

Authors: Juan Vidal Alegría, Ove Edfors

Abstract: Large intelligent surface (LIS) has gained momentum as a potential 6G-enabling technology that expands the benefits of massive multiple-input multiple-output (MIMO). On the other hand, orthogonal space-division multiplexing (OSDM) may give a promising direction for efficient exploitation of the spatial resources, analogous as what is achieved with orthogonal frequency-division multiplexing (OFDM)… ▽ More Large intelligent surface (LIS) has gained momentum as a potential 6G-enabling technology that expands the benefits of massive multiple-input multiple-output (MIMO). On the other hand, orthogonal space-division multiplexing (OSDM) may give a promising direction for efficient exploitation of the spatial resources, analogous as what is achieved with orthogonal frequency-division multiplexing (OFDM) in the frequency domain. To this end, we study how to enforce channel orthogonality in a panel-based LIS (P-LIS) scenario. Our proposed method consists of having a subset of active LIS-panels coherently serving a set of users, and another subset of LIS-panels operating in a novel low-power mode by implementing a receive and re-transmit (RRTx) process. This results in an inter-symbol interference (ISI) channel, where we characterize the RRTx processing required to achieve simultaneous orthogonality in time and space. We then employ the remaining degrees of freedom (DoFs) from the orthogonality constraint to minimize the RRTx processing power, where we derive a closed-form global minimizer, allowing for efficient implementation of the proposed scheme. △ Less

Submitted 31 March, 2025; v1 submitted 3 May, 2024; originally announced May 2024.

Comments: 6 pages, 3 figures. This work was presented at IEEE WCNC 2025, copyright has been transferred to IEEE

Channel Orthogonalization with Reconfigurable Surfaces: General Models, Theoretical Limits, and Effective Configuration

Authors: Juan Vidal Alegría, Johan Thunberg, Ove Edfors

Abstract: We envision a future in which multi-antenna technology effectively exploits the spatial domain as a set of non-interfering orthogonal resources, allowing for flexible resource allocation and efficient modulation/demodulation. We may refer to this paradigm as orthogonal space-division multiplexing (OSDM). On the other hand, reconfigurable intelligent surface (RIS) has emerged as a promising technol… ▽ More We envision a future in which multi-antenna technology effectively exploits the spatial domain as a set of non-interfering orthogonal resources, allowing for flexible resource allocation and efficient modulation/demodulation. We may refer to this paradigm as orthogonal space-division multiplexing (OSDM). On the other hand, reconfigurable intelligent surface (RIS) has emerged as a promising technology which allows shaping the propagation environment for improved performance. This paper studies the ability of three extended types of reconfigurable surface (RS), including the recently proposed beyond diagonal RIS (BD-RIS), to achieve perfectly orthogonal channels in a general multi-user multiple-input multiple-output (MU-MIMO) scenario. We consider practical implementations for the three types of RS consisting of passive components, and obtain the corresponding restrictions on their reconfigurability. We then use these restrictions to derive closed-form conditions and explicit expressions for achieving arbitrary (orthogonal) channels. We also study the problem of exploiting the degrees of freedom (DoFs) from the channel orthogonality constraint to maximize the channel gain while maintaining the passive RS constraints, and we propose some initial methods with satisfying performance. Finally, we provide some channel estimation and RS configuration techniques within this framework, where the computations are assumed to be performed at the BS, and we derive some limits on the amount of overhead required to achieve channel orthogonalization with RSs. The numerical results confirm the theoretical findings, showing that channel orthogonality with passive RSs can be effectively achieved in practical environments as long as the direct channel is not significant with respect to the RS cascaded channel. We thus take some important steps towards realizing OSDM. △ Less

Submitted 7 March, 2025; v1 submitted 22 March, 2024; originally announced March 2024.

Comments: 16 pages, 13 figures. This work is a preprint version of a paper published at IEEE Transactions on Wireless Communications

6G Radio Testbeds: Requirements, Trends, and Approaches

Authors: Gilles Callebaut, Liang Liu, Thomas Eriksson, Liesbet Van der Perre, Ove Edfors, Christian Fager

Abstract: The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more reali… ▽ More The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development. △ Less

Submitted 13 September, 2023; originally announced September 2023.

LuViRA Dataset Validation and Discussion: Comparing Vision, Radio, and Audio Sensors for Indoor Localization

Authors: Ilayda Yaman, Guoda Tian, Erik Tegler, Jens Gulin, Nikhil Challa, Fredrik Tufvesson, Ove Edfors, Kalle Astrom, Steffen Malkowsky, Liang Liu

Abstract: We present a unique comparative analysis, and evaluation of vision, radio, and audio based localization algorithms. We create the first baseline for the aforementioned sensors using the recently published Lund University Vision, Radio, and Audio (LuViRA) dataset, where all the sensors are synchronized and measured in the same environment. Some of the challenges of using each specific sensor for in… ▽ More We present a unique comparative analysis, and evaluation of vision, radio, and audio based localization algorithms. We create the first baseline for the aforementioned sensors using the recently published Lund University Vision, Radio, and Audio (LuViRA) dataset, where all the sensors are synchronized and measured in the same environment. Some of the challenges of using each specific sensor for indoor localization tasks are highlighted. Each sensor is paired with a current state-of-the-art localization algorithm and evaluated for different aspects: localization accuracy, reliability and sensitivity to environment changes, calibration requirements, and potential system complexity. Specifically, the evaluation covers the ORB-SLAM3 algorithm for vision-based localization with an RGB-D camera, a machine-learning algorithm for radio-based localization with massive MIMO technology, and the SFS2 algorithm for audio-based localization with distributed microphones. The results can serve as a guideline and basis for further development of robust and high-precision multi-sensory localization systems, e.g., through sensor fusion, context, and environment-aware adaptation. △ Less

Submitted 25 April, 2024; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 10 pages, 11 figures

Journal ref: IEEE Journal of Indoor and Seamless Positioning and Navigation (2024) 1-11

The LuViRA Dataset: Synchronized Vision, Radio, and Audio Sensors for Indoor Localization

Authors: Ilayda Yaman, Guoda Tian, Martin Larsson, Patrik Persson, Michiel Sandra, Alexander Dürr, Erik Tegler, Nikhil Challa, Henrik Garde, Fredrik Tufvesson, Kalle Åström, Ove Edfors, Steffen Malkowsky, Liang Liu

Abstract: We present a synchronized multisensory dataset for accurate and robust indoor localization: the Lund University Vision, Radio, and Audio (LuViRA) Dataset. The dataset includes color images, corresponding depth maps, inertial measurement unit (IMU) readings, channel response between a 5G massive multiple-input and multiple-output (MIMO) testbed and user equipment, audio recorded by 12 microphones,… ▽ More We present a synchronized multisensory dataset for accurate and robust indoor localization: the Lund University Vision, Radio, and Audio (LuViRA) Dataset. The dataset includes color images, corresponding depth maps, inertial measurement unit (IMU) readings, channel response between a 5G massive multiple-input and multiple-output (MIMO) testbed and user equipment, audio recorded by 12 microphones, and accurate six degrees of freedom (6DOF) pose ground truth of 0.5 mm. We synchronize these sensors to ensure that all data is recorded simultaneously. A camera, speaker, and transmit antenna are placed on top of a slowly moving service robot, and 89 trajectories are recorded. Each trajectory includes 20 to 50 seconds of recorded sensor data and ground truth labels. Data from different sensors can be used separately or jointly to perform localization tasks, and data from the motion capture (mocap) system is used to verify the results obtained by the localization algorithms. The main aim of this dataset is to enable research on sensor fusion with the most commonly used sensors for localization tasks. Moreover, the full dataset or some parts of it can also be used for other research areas such as channel estimation, image classification, etc. Our dataset is available at: https://github.com/ilaydayaman/LuViRA_Dataset △ Less

Submitted 26 April, 2024; v1 submitted 10 February, 2023; originally announced February 2023.

Comments: 7 pages, 7 figures, Accepted to ICRA 2024

LuMaMi28: Real-Time Millimeter-Wave Massive MIMO Systems with Antenna Selection

Authors: MinKeun Chung, Liang Liu, Andreas Johansson, Sara Gunnarsson, Martin Nilsson, Zhinong Ying, Olof Zander, Kamal Samanta, Chris Clifton, Toshiyuki Koimori, Shinya Morita, Satoshi Taniguchi, Fredrik Tufvesson, Ove Edfors

Abstract: This paper presents LuMaMi28, a real-time 28 GHz massive multiple-input multiple-output (MIMO) testbed. In this testbed, the base station has 16 transceiver chains with a fully-digital beamforming architecture (with different pre-coding algorithms) and simultaneously supports multiple user equipments (UEs) with spatial multiplexing. The UEs are equipped with a beam-switchable antenna array for rea… ▽ More This paper presents LuMaMi28, a real-time 28 GHz massive multiple-input multiple-output (MIMO) testbed. In this testbed, the base station has 16 transceiver chains with a fully-digital beamforming architecture (with different pre-coding algorithms) and simultaneously supports multiple user equipments (UEs) with spatial multiplexing. The UEs are equipped with a beam-switchable antenna array for real-time antenna selection where the one with the highest channel magnitude, out of four pre-defined beams, is selected. For the beam-switchable antenna array, we consider two kinds of UE antennas, with different beam-width and different peak-gain. Based on this testbed, we provide measurement results for millimeter-wave (mmWave) massive MIMO performance in different real-life scenarios with static and mobile UEs. We explore the potential benefit of the mmWave massive MIMO systems with antenna selection based on measured channel data, and discuss the performance results through real-time measurements. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Comments: 14 pages, 17 figures

27.5-29.5 GHz Switched Array Sounder for Dynamic Channel Characterization: Design, Implementation and Measurements

Authors: Harsh Tataria, Erik L. Bengtsson, Ove Edfors, Fredrik Tufvesson

Abstract: A pre-requisite for the design of wireless systems is the understanding of the propagation channel. While a wealth of propagation knowledge exists for bands below 6 GHz, the same can not be said for bands approaching millimeter-wave frequencies. In this paper, we present the design, implementation and measurement-based verification of a re-configurable 27.5-29.5 GHz channel sounder for measuring d… ▽ More A pre-requisite for the design of wireless systems is the understanding of the propagation channel. While a wealth of propagation knowledge exists for bands below 6 GHz, the same can not be said for bands approaching millimeter-wave frequencies. In this paper, we present the design, implementation and measurement-based verification of a re-configurable 27.5-29.5 GHz channel sounder for measuring dynamic directional channels. Based on the switched array principle, our design is capable of characterizing 128$\times$256 dual-polarized channels with snapshot times of around 600 ms. This is in sharp contrast to measurement times on the order of tens-of-minutes with rotating horn antenna sounders. Our design lends itself to high angular resolution at both link ends with calibrated antenna arrays sampled at 2$^\circ$ and 5$^\circ$ intervals in the azimuth and elevation domains. This is complemented with a bandwidth of up to 2 GHz, enabling nanosecond-level delay resolution. The short measurement times and stable radio frequency design facilitates real-time processing and averaging of the received wavefronts to gain measurement signal-to-noise ratio and dynamic range. After disclosing the sounder design and implementation, we demonstrate its capabilities by presenting dynamic and static measurements at 28 GHz over a 1 GHz bandwidth in an office corridor environment. △ Less

Submitted 22 May, 2021; originally announced May 2021.

Comments: IEEE Transactions on Wireless Communications, 30 pages, 16 figures, 2 tables

Distributed and Scalable Uplink Processing for LIS: Algorithm, Architecture, and Design Trade-offs

Authors: Jesus Rodriguez Sanchez, Fredrik Rusek, Ove Edfors, Liang Liu

Abstract: The Large Intelligent Surface (LIS) is a promising technology in the areas of wireless communication, remote sensing and positioning. It consists of a continuous radiating surface located in the proximity of the users, with the capability to communicate by transmission and reception (replacing base stations). Despite of its potential, there are numerous challenges from implementation point of view… ▽ More The Large Intelligent Surface (LIS) is a promising technology in the areas of wireless communication, remote sensing and positioning. It consists of a continuous radiating surface located in the proximity of the users, with the capability to communicate by transmission and reception (replacing base stations). Despite of its potential, there are numerous challenges from implementation point of view, being the interconnection data-rate, computational complexity, and storage the most relevant ones. In order to address those challenges, hierarchical architectures with distributed processing techniques are envisioned to to be relevant for this task, while ensuring scalability. In this work we perform algorithm-architecture codesign to propose two distributed interference cancellation algorithms, and a tree-based interconnection topology for uplink processing. We also analyze the performance, hardware requirements, and architecture tradeoffs for a discrete LIS, in order to provide concrete case studies and guidelines for efficient implementation of LIS systems. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Comments: Manuscript submitted for journal publication

Millimeter-Wave Massive MIMO Testbed with Hybrid Beamforming

Authors: MinKeun Chung, Liang Liu, Andreas Johansson, Martin Nilsson, Olof Zander, Zhinong Ying, Fredrik Tufvesson, Ove Edfors

Abstract: Massive multiple-input multiple-out (MIMO) technology is vital in millimeter-wave (mmWave) bands to obtain large array gains. However, there are practical challenges, such as high hardware cost and power consumption in such systems. A promising solution to these problems is to adopt a hybrid beamforming architecture. This architecture has a much lower number of transceiver (TRx) chains than the to… ▽ More Massive multiple-input multiple-out (MIMO) technology is vital in millimeter-wave (mmWave) bands to obtain large array gains. However, there are practical challenges, such as high hardware cost and power consumption in such systems. A promising solution to these problems is to adopt a hybrid beamforming architecture. This architecture has a much lower number of transceiver (TRx) chains than the total antenna number, resulting in cost- and energy-efficient systems. In this paper, we present a real-time mmWave (28 GHz) massive MIMO testbed with hybrid beamforming. This testbed has a 64-antenna/16-TRx unit for beam-selection, which can be expanded to larger array sizes in a modular way. For testing everything from baseband processing algorithms to scheduling and beam-selection in real propagation environments, we extend the capability of an existing 100-antenna/100-TRx massive MIMO testbed (below 6 GHz), built upon software-defined radio technology, to a flexible mmWave massive MIMO system. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Comments: 54th Asilomar Conference on Signals, Systems, and Computers, Nov. 2020

Trade-offs in Decentralized Multi-Antenna Architectures: The WAX Decomposition

Authors: Juan Vidal Alegría, Fredrik Rusek, Ove Edfors

Abstract: Current research on multi-antenna architectures is trending towards increasing the amount of antennas in the base stations (BSs) so as to increase the spectral efficiency. As a result, the interconnection bandwidth and computational complexity required to process the data using centralized architectures is becoming prohibitively high. Decentralized architectures can reduce these requirements by pr… ▽ More Current research on multi-antenna architectures is trending towards increasing the amount of antennas in the base stations (BSs) so as to increase the spectral efficiency. As a result, the interconnection bandwidth and computational complexity required to process the data using centralized architectures is becoming prohibitively high. Decentralized architectures can reduce these requirements by pre-processing the data before it arrives at a central processing unit (CPU). However, performing decentralized processing introduces also cost in complexity/interconnection bandwidth at the antenna end which is in general being ignored. This paper aims at studying the interplay between level of decentralization and the associated complexity/interconnection bandwidth requirement at the antenna end. To do so, we propose a general framework for centralized/decentralized architectures that can explore said interplay by adjusting some system parameters, namely the number of connections to the CPU (level of decentralization), and the number of multiplications/outputs per antenna (complexity/interconnection bandwidth). We define a novel matrix decomposition, the WAX decomposition, that allows information-lossless processing within our proposed framework, and we use it to obtain the operational limits of the interplay under study. We also look into some of the limitations of the WAX decomposition. △ Less

Submitted 29 May, 2021; v1 submitted 1 December, 2020; originally announced December 2020.

Comments: 14 pages, 9 figures, submitted to IEEE Transactions on Signal Processing. arXiv admin note: text overlap with arXiv:2003.01961

Journal ref: IEEE Trans. Sig. Proc., 69, 2021, 3627-3641

Phase-Noise Compensation for OFDM Systems Exploiting Coherence Bandwidth: Modeling, Algorithms, and Analysis

Authors: MinKeun Chung, Liang Liu, Ove Edfors

Abstract: Phase-noise (PN) estimation and compensation are crucial in millimeter-wave (mmWave) communication systems to achieve high reliability. The PN estimation, however, suffers from high computational complexity due to its fundamental characteristics, such as spectral spreading and fast-varying fluctuations. In this paper, we propose a new framework for low-complexity PN compensation in orthogonal freq… ▽ More Phase-noise (PN) estimation and compensation are crucial in millimeter-wave (mmWave) communication systems to achieve high reliability. The PN estimation, however, suffers from high computational complexity due to its fundamental characteristics, such as spectral spreading and fast-varying fluctuations. In this paper, we propose a new framework for low-complexity PN compensation in orthogonal frequency-division multiplexing systems. The proposed framework also includes a pilot allocation strategy to minimize its overhead. The key ideas are to exploit the coherence bandwidth of mmWave systems and to approximate the actual PN spectrum with its dominant components, resulting in a non-iterative solution by using linear minimum mean squared-error estimation. The proposed method obtains a reduction of more than 2.5x in total complexity, as compared to the existing methods. Furthermore, we derive closed-form expressions for normalized mean squared-errors (NMSEs) as a function of critical system parameters, which help in understanding the NMSE behavior in low and high signal-to-noise ratio regimes. Lastly, we study a trade-off between performance and pilot-overhead to provide insight into an appropriate approximation of the PN spectrum. △ Less

Submitted 27 September, 2021; v1 submitted 19 July, 2020; originally announced July 2020.

Comments: To appear in IEEE Transactions on Wireless Communications

The Effect of Coupling Memory and Block Length on Spatially Coupled Serially Concatenated Codes

Authors: Mojtaba Mahdavi, Muhammad Umar Farooq, Liang Liu, Ove Edfors, Viktor Öwall, Michael Lentmaier

Abstract: Spatially coupled serially concatenated codes (SC-SCCs) are a class of spatially coupled turbo-like codes, which have a close-to-capacity performance and low error floor. In this paper we investigate the impact of coupling memory, block length, decoding window size, and number of iterations on the performance, complexity, and latency of SC-SCCs. Several design tradeoffs are presented to see the re… ▽ More Spatially coupled serially concatenated codes (SC-SCCs) are a class of spatially coupled turbo-like codes, which have a close-to-capacity performance and low error floor. In this paper we investigate the impact of coupling memory, block length, decoding window size, and number of iterations on the performance, complexity, and latency of SC-SCCs. Several design tradeoffs are presented to see the relation between these parameters in a wide range. Also, our analysis provides design guidelines for SC-SCCs in different scenarios to make the code design independent of block length. As a result, block length and coupling memory can be exchanged flexibly without changing the latency and complexity. Also, we observe that the performance of SC-SCCs is improved with respect to the uncoupled ensembles for a fixed latency and complexity. △ Less

Submitted 25 July, 2021; v1 submitted 23 June, 2020; originally announced June 2020.

Comments: Presented at the IEEE 93rd Vehicular Technology Conference (VTC) 2021-Spring

Trade-offs In Quasi-Decentralized Massive MIMO

Authors: Juan Vidal Alegría, Fredrik Rusek, Jesús Rodríguez Sánchez, Ove Edfors

Abstract: Typical massive multiple-input multiple-output (MIMO) architectures consider a centralized approach, in which all baseband data received by each antenna has to be sent to a central processing unit (CPU) to be processed. Due to the enormous amount of antennas expected in massive MIMO base stations (BSs), the number of connections to the CPU required in centralized massive MIMO is not scalable. In r… ▽ More Typical massive multiple-input multiple-output (MIMO) architectures consider a centralized approach, in which all baseband data received by each antenna has to be sent to a central processing unit (CPU) to be processed. Due to the enormous amount of antennas expected in massive MIMO base stations (BSs), the number of connections to the CPU required in centralized massive MIMO is not scalable. In recent literature decentralized approaches have been proposed to reduce the number of connections between the antennas and the CPU. However, the reduction in the connections to the CPU requires more outputs per antenna to be generated. We study the trade-off between number of connections to the CPU and number of outputs per antenna. We propose a generalized architecture that allows exploitation of this trade-off, and we define a novel matrix decomposition that allows lossless linear equalization within our proposed architecture. △ Less

Submitted 4 March, 2020; originally announced March 2020.

Comments: 6 pages, 4 figures, accepted at IEEE ICC 2020 workshop on scalable massive MIMO technologies for beyond 5G

Journal ref: Proc. IEEE ICC Wkshp., 2020, 1-6

Real-Time Implementation Aspects of Large Intelligent Surfaces

Authors: Harsh Tataria, Fredrik Tufvesson, Ove Edfors

Abstract: With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundam… ▽ More With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundamental spectral efficiency performance of these architectures. In stark contrast, this paper investigates the implementation aspects of LISs. Using the fully active LIS as the basis of our exposition, we first present a rigorous discussion on the relative merits and disadvantages of possible implementation architectures from a radio-frequency circuits and real-time processing viewpoints. We then show that a distributed architecture based on a common module interfacing a smaller number of antennas can be scalable. To avoid severe losses with analog signal distribution, multiple common modules can be interconnected via a digital nearest-neighbor network. Furthermore, we show that with such a design, the maximum backplane throughput scales with the number of served user terminals, instead of the number of antennas across the surface. The discussions in the paper can serve as a guideline toward the real-time design and development of LISs. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Comments: Invited Paper in the Proceedings of IEEE ICASSP 2020

RadioWeaves for efficient connectivity: analysis andimpact of constraints in actual deployments

Authors: Liesbet Van der Perre, Erik G. Larsson, Fredrik Tufvesson, Lieven De Strycker, Emil Björnson, Ove Edfors

Abstract: We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the en… ▽ More We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the environment. Technologically, RadioWeaves will deploy distributed arrays to create both favorable propagation and antenna array interaction. The technology leverages on the ideas of large-scale intelligent surfaces and cell-free wireless access. Offering close to the service connectivity and computing, new grades in energy efficiency,reliability, and low latency can be reached. The new concept moreover can be scaled up easily to offer a very high capacity inspecific areas demanding so. In this paper we anticipate how two different demanding use cases can be served well by a dedicated RadioWeaves deployment: a crowd scenario and a highly reflective factory environment. A practical approach towards a RadioWeaves prototype, integrating dispersed electronics invisibly in a room environment, is introduced. We outline diverse R\&D challenges that need to be addressed to realize the great potential of the RadioWeaves technology. △ Less

Submitted 16 January, 2020; originally announced January 2020.

Comments: Presented at Asilomar 2019, publication in conference proceedings accepted

Processing Distribution and Architecture Tradeoff for Large Intelligent Surface Implementation

Authors: Jesus Rodriguez Sanchez, Ove Edfors, Fredrik Rusek, Liang Liu

Abstract: The Large Intelligent Surface (LIS) concept has emerged recently as a new paradigm for wireless communication, remote sensing and positioning. It consists of a continuous radiating surface placed relatively close to the users, which is able to communicate with users by independent transmission and reception (replacing base stations). Despite of its potential, there are a lot of challenges from an… ▽ More The Large Intelligent Surface (LIS) concept has emerged recently as a new paradigm for wireless communication, remote sensing and positioning. It consists of a continuous radiating surface placed relatively close to the users, which is able to communicate with users by independent transmission and reception (replacing base stations). Despite of its potential, there are a lot of challenges from an implementation point of view, with the interconnection data-rate and computational complexity being the most relevant. Distributed processing techniques and hierarchical architectures are expected to play a vital role addressing this while ensuring scalability. In this paper we perform algorithm-architecture codesign and analyze the hardware requirements and architecture trade-offs for a discrete LIS to perform uplink detection. By doing this, we expect to give concrete case studies and guidelines for efficient implementation of LIS systems. △ Less

Submitted 7 June, 2020; v1 submitted 14 January, 2020; originally announced January 2020.

Comments: Presented at IEEE ICC 2020

An Iterative Interference Cancellation Algorithm for Large Intelligent Surfaces

Authors: Jesus Rodriguez Sanchez, Fredrik Rusek, Ove Edfors, Liang Liu

Abstract: The Large Intelligent Surface (LIS) concept is a promising technology aiming to revolutionize wireless communication by exploiting spatial multiplexing at its fullest. Despite of its potential, due to the size of the LIS and the large number of antenna elements involved there is a need of decentralized architectures together with distributed algorithms which can reduce the inter-connection data-ra… ▽ More The Large Intelligent Surface (LIS) concept is a promising technology aiming to revolutionize wireless communication by exploiting spatial multiplexing at its fullest. Despite of its potential, due to the size of the LIS and the large number of antenna elements involved there is a need of decentralized architectures together with distributed algorithms which can reduce the inter-connection data-rate and computational requirement in the Central Processing Unit (CPU). In this article we address the uplink detection problem in the LIS system and propose a decentralize architecture based on panels, which perform local linear processing. We also provide the sum-rate capacity for such architecture and derive an algorithm to obtain the equalizer, which aims to maximize the sum-rate capacity. A performance analysis is also presented, including a comparison to a naive approach based on a reduced form of the matched filter (MF) method. The results shows the superiority of the proposed algorithm. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Low Power Receiver Front Ends: Scaling Laws and Applications

Authors: Muris Sarajlić, Liang Liu, Henrik Sjöland, Ove Edfors

Abstract: In this paper, we combine communication-theoretic laws with known, practically verified results from circuit theory. As a result, we obtain closed-form theoretical expressions linking fundamental system design and environment parameters with the power consumption of analog front ends for communication receivers. This collection of scaling laws and bounds is meant to serve as a theoretical referenc… ▽ More In this paper, we combine communication-theoretic laws with known, practically verified results from circuit theory. As a result, we obtain closed-form theoretical expressions linking fundamental system design and environment parameters with the power consumption of analog front ends for communication receivers. This collection of scaling laws and bounds is meant to serve as a theoretical reference for practical low power front end design. In one set of results, we first find that the front end power consumption scales at least as SNDR^3/2 if environment parameters (fading and blocker levels) are static. The obtained scaling law is subsequently used to derive relations between front end power consumption and several other important communication system parameters, namely, digital modulation constellation size, symbol error probability, error control coding gain and coding rate. Such relations, in turn, can be used when deciding which system design strategies to adopt for low-power applications. For example, if error control coding is employed, the most energy-efficient strategy for the entire receiver is to use codes with moderate coding gain and simple decoding algorithms, such as convolutional codes. In another collection of results, we find how front end power scales with environment parameters if the performance is kept constant. This yields bounds on average power reduction of receivers that adapt to the communication environment. For instance, if a receiver front end adapts to fading fluctuations while keeping the performance above some given minimum requirement, power can theoretically be reduced at least 20x compared to a non-adaptive front end. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Massive MIMO Extensions to the COST 2100 Channel Model: Modeling and Validation

Authors: Jose Flordelis, Xuhong Li, Ove Edfors, Fredrik Tufvesson

Abstract: To enable realistic studies of massive multiple-input multiple-output systems, the COST 2100 channel model is extended based on measurements. First, the concept of a base station-side visibility region (BS-VR) is proposed to model the appearance and disappearance of clusters when using a physically-large array. We find that BS-VR lifetimes are exponentially distributed, and that the number of BS-V… ▽ More To enable realistic studies of massive multiple-input multiple-output systems, the COST 2100 channel model is extended based on measurements. First, the concept of a base station-side visibility region (BS-VR) is proposed to model the appearance and disappearance of clusters when using a physically-large array. We find that BS-VR lifetimes are exponentially distributed, and that the number of BS-VRs is Poisson distributed with intensity proportional to the sum of the array length and the mean lifetime. Simulations suggest that under certain conditions longer lifetimes can help decorrelating closely-located users. Second, the concept of a multipath component visibility region (MPC-VR) is proposed to model birth-death processes of individual MPCs at the mobile station side. We find that both MPC lifetimes and MPC-VR radii are lognormally distributed. Simulations suggest that unless MPC-VRs are applied the channel condition number is overestimated. Key statistical properties of the proposed extensions, e.g., autocorrelation functions, maximum likelihood estimators, and Cramer-Rao bounds, are derived and analyzed. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Comments: Submitted to IEEE Transactions of Wireless Communications

Decentralized Massive MIMO Processing Exploring Daisy-chain Architecture and Recursive Algorithms

Authors: Jesus Rodriguez Sanchez, Fredrik Rusek, Ove Edfors, Muris Sarajlic, Liang Liu

Abstract: Algorithms for Massive MIMO uplink detection and downlink precoding typically rely on a centralized approach, by which baseband data from all antenna modules are routed to a central node in order to be processed. In the case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, said routing becomes a bottleneck since interconnection throughput is limited. This… ▽ More Algorithms for Massive MIMO uplink detection and downlink precoding typically rely on a centralized approach, by which baseband data from all antenna modules are routed to a central node in order to be processed. In the case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, said routing becomes a bottleneck since interconnection throughput is limited. This paper presents a fully decentralized architecture and an algorithm for Massive MIMO uplink detection and downlink precoding based on the Stochastic Gradient Descent (SGD) method, which does not require a central node for these tasks. Through a recursive approach and very low complexity operations, the proposed algorithm provides a good trade-off between performance, interconnection throughput and latency. Further, our proposed solution achieves significantly lower interconnection data-rate than other architectures, enabling future scalability. △ Less

Submitted 28 January, 2020; v1 submitted 8 May, 2019; originally announced May 2019.

Comments: Manuscript accepted for publication in IEEE Transactions on Signal Processing

Capacity Degradation with Modeling Hardware Impairment in Large Intelligent Surface

Authors: Sha Hu, Fredrik Rusek, Ove Edfors

Abstract: In this paper, we consider capacity degradations stemming from potential hardware impairments (HWI) of newly proposed Large Intelligent Surface (LIS) systems. Without HWI, the utility of surface-area (the first-order derivative of the capacity with respect to surface-area) is shown to be proportional to the inverse of it. With HWI, the capacity as well as the utility of surface-area are both degra… ▽ More In this paper, we consider capacity degradations stemming from potential hardware impairments (HWI) of newly proposed Large Intelligent Surface (LIS) systems. Without HWI, the utility of surface-area (the first-order derivative of the capacity with respect to surface-area) is shown to be proportional to the inverse of it. With HWI, the capacity as well as the utility of surface-area are both degraded, due to a higher effective noise level caused by the HWI. After first modeling the HWI in a general form, we derive the effective noise density and the decrement of utility in closed-forms. With those the impacts of increasing the surface-area can be clearly seen. One interesting but also natural outcome is that both the capacity and utility can be decreased when increasing the surface-area in the cases with severe HWI. The turning points where the capacity and the utility start to decrease with HWI can be evaluated from the derived formulas for them. Further, we also consider distributed implementations of a LIS system by splitting it into multiple small LIS-Units, where the impacts of HWI can be significantly suppressed due to a smaller surface-area of each unit. △ Less

Submitted 23 October, 2018; originally announced October 2018.

Comments: 6 pages, 7 figures, submitted to GlobeCom 2018

Fully Decentralized Massive MIMO Detection Based on Recursive Methods

Authors: Jesus Rodriguez Sanchez, Fredrik Rusek, Muris Sarajlic, Ove Edfors, Liang Liu

Abstract: Algorithms for Massive MIMO uplink detection typically rely on a centralized approach, by which baseband data from all antennas modules are routed to a central node in order to be processed. In case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, this architecture leads to a bottleneck, with critical limitations in terms of interconnection bandwidth requi… ▽ More Algorithms for Massive MIMO uplink detection typically rely on a centralized approach, by which baseband data from all antennas modules are routed to a central node in order to be processed. In case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, this architecture leads to a bottleneck, with critical limitations in terms of interconnection bandwidth requirements. This paper presents a fully decentralized architecture and algorithms for Massive MIMO uplink based on recursive methods, which do not require a central node for the detection process. Through a recursive approach and very low complexity operations, the proposed algorithms provide a sequence of estimates that converge asymptotically to the zero-forcing solution, without the need of specific hardware for matrix inversion. The proposed solution achieves significantly lower interconnection data-rate than other architectures, enabling future scalability. △ Less

Submitted 28 August, 2018; originally announced August 2018.

Comments: Manuscript accepted for presentation at IEEE SiPS 2018

Impact of Relay Cooperation on the Performance of Large-scale Multipair Two-way Relay Networks

Authors: Muris Sarajlic, Liang Liu, Fredrik Rusek, Farhana Sheikh, Ove Edfors

Abstract: We consider a multipair two-way relay communication network, where pairs of user devices exchange information via a relay system. The communication between users employs time division duplex, with all users transmitting simultaneously to relays in one time slot and relays sending the processed information to all users in the next time slot. The relay system consists of a large number of single ant… ▽ More We consider a multipair two-way relay communication network, where pairs of user devices exchange information via a relay system. The communication between users employs time division duplex, with all users transmitting simultaneously to relays in one time slot and relays sending the processed information to all users in the next time slot. The relay system consists of a large number of single antenna units that can form groups. Within each group, relays exchange channel state information (CSI), signals received in the uplink and signals intended for downlink transmission. On the other hand, per-group CSI and uplink/downlink signals (data) are not exchanged between groups, which perform the data processing completely independently. Assuming that the groups perform zero-forcing in both uplink and downlink, we derive a lower bound for the ergodic sumrate of the described system as a function of the relay group size. By close observation of this lower bound, it is concluded that the sumrate is essentially independent of group size when the group size is much larger than the number of user pairs. This indicates that a very large group of cooperating relays can be substituted by a number of smaller groups, without incurring any significant performance reduction. Moreover, this result implies that relay cooperation is more efficient (in terms of resources spent on cooperation) when several smaller relay groups are used in contrast to a single, large group. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: Accepted to Globecom 2018. Copyright 2018 IEEE

Unmanned Aerial Vehicle Assisted Cellular Communication

Authors: Sha Hu, Jose Flordelis, Fredrik Rusek, Ove Edfors

Abstract: In this paper, we consider unmanned aerial vehicles (UAVs) assisted cellular communication system, where UAVs can be used as amplify-and-forward (AF) relays. The effective channel with UAV assisted communication can be modeled as a Rayleigh product-channel, and we derive a tight lower-bound of the ergodic capacity in closed-form. With the obtained lower-bound, trade-offs between the transmit power… ▽ More In this paper, we consider unmanned aerial vehicles (UAVs) assisted cellular communication system, where UAVs can be used as amplify-and-forward (AF) relays. The effective channel with UAV assisted communication can be modeled as a Rayleigh product-channel, and we derive a tight lower-bound of the ergodic capacity in closed-form. With the obtained lower-bound, trade-offs between the transmit power and the equipped number of antennas of the UAVs can be analyzed. Alternatively, for a giving setting of users and the base-transceiver station (BTS), the needed transmit power and number of antennas for the UAVs can be derived in order to have a higher ergodic capacity with the UAV assisted communication than that without it. △ Less

Submitted 27 June, 2018; v1 submitted 15 March, 2018; originally announced March 2018.

Comments: Submitted to IEEE Conference

Achievable Rates and Training Overheads for a Measured LOS Massive MIMO Channel

Authors: Paul Harris, Wael Boukley Hasan, Liang Liu, Steffen Malkowsky, Mark Beach, Simon Armour, Fredrik Tufvesson, Ove Edfors

Abstract: This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is f… ▽ More This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is formed which considers the 90% coherence time to evaluate the impact of MMIMO channel training overheads in high-speed LOS scenarios. It is shown that whilst 25% of the achievable zero-forcing (ZF) sumrate is lost when the resounding interval is increased by a factor of 4, the OFDM training overheads for a 100-antenna MMIMO BS using an LTE-like physical layer could be as low as 2% for a terminal speed of 90m/s. △ Less

Submitted 22 February, 2018; v1 submitted 9 November, 2017; originally announced November 2017.

Comments: 4 pages, 5 figures

Journal ref: IEEE Wireless Communications Letters 2018

User Assignment with Distributed Large Intelligent Surface (LIS) Systems

Authors: Sha Hu, Krishna Chitti, Fredrik Rusek, Ove Edfors

Abstract: In this paper, we consider a wireless communication system where a large intelligent surface (LIS) is deployed comprising a number of small and distributed LIS-Units. Each LIS-Unit has a separate signal process unit (SPU) and is connected to a central process unit (CPU) that coordinates the behaviors of all the LIS-Units. With such a LIS system, we consider the user assignments both for sum-rate a… ▽ More In this paper, we consider a wireless communication system where a large intelligent surface (LIS) is deployed comprising a number of small and distributed LIS-Units. Each LIS-Unit has a separate signal process unit (SPU) and is connected to a central process unit (CPU) that coordinates the behaviors of all the LIS-Units. With such a LIS system, we consider the user assignments both for sum-rate and minimal user-rate maximizations. That is, assuming $M$ LIS-Units deployed in the LIS system, the objective is to select $K$ ($K\!\leq\!M$) best LIS-Units to serve $K$ autonomous users simultaneously. Based on the nice property of effective inter-user interference suppression of the LIS-Units, the optimal user assignments can be effectively found through classical linear assignment problems (LAPs) defined on a bipartite graph. To be specific, the optimal user assignment for sum-rate and user-rate maximizations can be solved by linear sum assignment problem (LSAP) and linear bottleneck assignment problem (LBAP), respectively. The elements of the cost matrix are constructed based on the received signal strength (RSS) measured at each of the $M$ LIS-Units for all the $K$ users. Numerical results show that, the proposed user assignments are close to optimal user assignments both under line-of-sight (LoS) and scattering environments. △ Less

Submitted 6 September, 2017; originally announced September 2017.

Comments: submitted to IEEE conference; 6 pages;10 figures

Beyond Massive-MIMO: The Potential of Data-Transmission with Large Intelligent Surfaces

Authors: Sha Hu, Fredrik Rusek, Ove Edfors

Abstract: In this paper, we consider the potential of data-transmission in a system with a massive number of radiating and sensing elements, thought of as a contiguous surface of electromagnetically active material. We refer to this as a large intelligent surface (LIS). The "LIS" is a newly proposed concept, which conceptually goes beyond contemporary massive MIMO technology, that arises from our vision of… ▽ More In this paper, we consider the potential of data-transmission in a system with a massive number of radiating and sensing elements, thought of as a contiguous surface of electromagnetically active material. We refer to this as a large intelligent surface (LIS). The "LIS" is a newly proposed concept, which conceptually goes beyond contemporary massive MIMO technology, that arises from our vision of a future where man-made structures are electronically active with integrated electronics and wireless communication making the entire environment "intelligent". We consider capacities of single-antenna autonomous terminals communicating to the LIS where the entire surface is used as a receiving antenna array. Under the condition that the surface-area is sufficiently large, the received signal after a matched-filtering (MF) operation can be closely approximated by a sinc-function-like intersymbol interference (ISI) channel. We analyze the capacity per square meter (m^2) deployed surface, \hat{C}, that is achievable for a fixed transmit power per volume-unit, \hat{P}. Moreover, we also show that the number of independent signal dimensions per m deployed surface is 2/λfor one-dimensional terminal-deployment, and π/λ^2 per m^2 for two and three dimensional terminal-deployments. Lastly, we consider implementations of the LIS in the form of a grid of conventional antenna elements and show that, the sampling lattice that minimizes the surface-area of the LIS and simultaneously obtains one signal space dimension for every spent antenna is the hexagonal lattice. We extensively discuss the design of the state-of-the-art low-complexity channel shortening (CS) demodulator for data-transmission with the LIS. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Comments: Submitted to IEEE Trans. on Signal Process., 30 pages, 12 figures

Beyond Massive-MIMO: The Potential of Positioning with Large Intelligent Surfaces

Authors: Sha Hu, Fredrik Rusek, Ove Edfors

Abstract: We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS), which is a newly proposed concept beyond massive-MIMO where future man-made structures are electronically active with integrated electronics and wireless communication making the entire environment \lq\lq{}intelligent\rq\rq{}. In a first step, we derive Fisher-information… ▽ More We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS), which is a newly proposed concept beyond massive-MIMO where future man-made structures are electronically active with integrated electronics and wireless communication making the entire environment \lq\lq{}intelligent\rq\rq{}. In a first step, we derive Fisher-information and Cramér-Rao lower bounds (CRLBs) in closed-form for positioning a terminal located perpendicular to the center of the LIS, whose location we refer to as being on the central perpendicular line (CPL) of the LIS. For a terminal that is not on the CPL, closed-form expressions of the Fisher-information and CRLB seem out of reach, and we alternatively find approximations of them which are shown to be accurate. Under mild conditions, we show that the CRLB for all three Cartesian dimensions ($x$, $y$ and $z$) decreases quadratically in the surface-area of the LIS, except for a terminal exactly on the CPL where the CRLB for the $z$-dimension (distance from the LIS) decreases linearly in the same. In a second step, we analyze the CRLB for positioning when there is an unknown phase $\varphi$ presented in the analog circuits of the LIS. We then show that the CRLBs are dramatically increased for all three dimensions but decrease in the third-order of the surface-area. Moreover, with an infinitely large LIS the CRLB for the $z$-dimension with an unknown $\varphi$ is 6 dB higher than the case without phase uncertainty, and the CRLB for estimating $\varphi$ converges to a constant that is independent of the wavelength $λ$. At last, we extensively discuss the impact of centralized and distributed deployments of LIS, and show that a distributed deployment of LIS can enlarge the coverage for terminal-positioning and improve the overall positioning performance. △ Less

Submitted 19 May, 2017; originally announced May 2017.

Comments: Submitted to IEEE Trans. on Signal Processing on Apr. 2017; 30 pages; 13 figures

Massive MIMO Performance - TDD Versus FDD: What Do Measurements Say?

Authors: Jose Flordelis, Fredrik Rusek, Fredrik Tufvesson, Erik G. Larsson, Ove Edfors

Abstract: Downlink beamforming in Massive MIMO either relies on uplink pilot measurements - exploiting reciprocity and TDD operation, or on the use of a predetermined grid of beams with user equipments reporting their preferred beams, mostly in FDD operation. Massive MIMO in its originally conceived form uses the first strategy, with uplink pilots, whereas there is currently significant commercial interest… ▽ More Downlink beamforming in Massive MIMO either relies on uplink pilot measurements - exploiting reciprocity and TDD operation, or on the use of a predetermined grid of beams with user equipments reporting their preferred beams, mostly in FDD operation. Massive MIMO in its originally conceived form uses the first strategy, with uplink pilots, whereas there is currently significant commercial interest in the second, grid-of-beams. It has been analytically shown that in isotropic scattering (independent Rayleigh fading) the first approach outperforms the second. Nevertheless there remains controversy regarding their relative performance in practice. In this contribution, the performances of these two strategies are compared using measured channel data at 2.6 GHz. △ Less

Submitted 3 April, 2017; originally announced April 2017.

Comments: Submitted to IEEE Transactions on Wireless Communications, 31/Mar/2017

Temporal Analysis of Measured LOS Massive MIMO Channels with Mobility

Authors: Paul Harris, Steffen Malkowsky, Joao Vieira, Fredrik Tufvesson, Wael Boukley Hasan, Liang Liu, Mark Beach, Simon Armour, Ove Edfors

Abstract: The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of o… ▽ More The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive MIMO deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the correlation of the MIMO channel vector over time is inspected for vehicles moving up to 29 km/h. For a 100 antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8 antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system. △ Less

Submitted 14 March, 2017; originally announced March 2017.

Comments: Accepted for presentation at the 85th IEEE Vehicular Technology Conference in Sydney. 5 Pages. arXiv admin note: substantial text overlap with arXiv:1701.08818

Cramér-Rao Lower Bounds for Positioning with Large Intelligent Surfaces

Authors: Sha Hu, Fredrik Rusek, Ove Edfors

Abstract: We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS). We derive Fisher-informations and Cramér-Rao lower bounds (CRLB) in closed-form for terminals along the central perpendicular line (CPL) of the LIS for all three Cartesian dimensions. For terminals at positions other than the CPL, closed-form expressions for the Fisher-in… ▽ More We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS). We derive Fisher-informations and Cramér-Rao lower bounds (CRLB) in closed-form for terminals along the central perpendicular line (CPL) of the LIS for all three Cartesian dimensions. For terminals at positions other than the CPL, closed-form expressions for the Fisher-informations and CRLBs seem out of reach, and we alternatively provide approximations (in closed-form) which are shown to be very accurate. We also show that under mild conditions, the CRLBs in general decrease quadratically in the surface-area for both the $x$ and $y$ dimensions. For the $z$-dimension (distance from the LIS), the CRLB decreases linearly in the surface-area when terminals are along the CPL. However, when terminals move away from the CPL, the CRLB is dramatically increased and then also decreases quadratically in the surface-area. We also extensively discuss the impact of different deployments (centralized and distributed) of the LIS. △ Less

Submitted 24 April, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Comments: Submitted to VTC-Fall, 2017; 6 pages; 7 figures

The Potential of Using Large Antenna Arrays on Intelligent Surfaces

Authors: Sha Hu, Fredrik Rusek, Ove Edfors

Abstract: In this paper, we consider capacities of single-antenna terminals communicating to large antenna arrays that are deployed on surfaces. That is, the entire surface is used as an intelligent receiving antenna array. Under the condition that the surface area is sufficiently large, the received signal after matched-filtering (MF) can be well approximated by an intersymbol interference (ISI) channel wh… ▽ More In this paper, we consider capacities of single-antenna terminals communicating to large antenna arrays that are deployed on surfaces. That is, the entire surface is used as an intelligent receiving antenna array. Under the condition that the surface area is sufficiently large, the received signal after matched-filtering (MF) can be well approximated by an intersymbol interference (ISI) channel where channel taps are closely related to a sinc function. Based on such an approximation, we have derived the capacities for both one-dimensional (terminals on a line) and high dimensional (terminals on a plane or in a cube) terminal-deployments. In particular, we analyze the normalized capacity $\bar{\mathcal{C}}$, measured in nats/s/Hz/m$^2$, under the constraint that the transmit power per m$^2$, $\bar{P}$, is fixed. We show that when the user-density increases, the limit of $\bar{\mathcal{C}}$, achieved as the wavelength $λ$ approaches 0, is $\bar{P}/(2N_0)$ nats/s/Hz/m$^2$, where $N_0$ is the spatial power spectral density (PSD) of noise. In addition, we also show that the number of signal dimensions is $2/λ$ per meter deployed surface for the one-dimensional case, and $π/λ^2$ per m$^2$ deployed surface for two and three dimensional terminal-deployments. △ Less

Submitted 10 February, 2017; originally announced February 2017.

Comments: 6 pages, 10 figures,conference

Performance Characterization of a Real-Time Massive MIMO System with LOS Mobile Channels

Authors: Paul Harris, Steffen Malkowsky, Joao Vieira, Fredrik Tufvesson Wael Boukley Hassan, Liang Liu, Mark Beach, Simon Armour, Ove Edfors

Abstract: The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel in… ▽ More The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive multiple-input, multiple-output (MIMO) deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the massive MIMO channel is sampled across many points in space to build a picture of the overall user orthogonality, and the impact of both azimuth and elevation array configurations are considered. Temporal analysis is also conducted for vehicles moving up to 29km/h and real-time bit error rates (BERs) for both the UL and DL without power control are presented. For a 100-antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8-antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system. △ Less

Submitted 19 May, 2017; v1 submitted 30 January, 2017; originally announced January 2017.

Comments: Submitted to the 2017 IEEE JSAC Special Issue on Deployment Issues and Performance Challenges for 5G, IEEE Journal on Selected Areas in Communications, 2017, vol.PP, no.99, pp.1-1

The World's First Real-Time Testbed for Massive MIMO: Design, Implementation, and Validation

Authors: Steffen Malkowsky, Joao Vieira, Liang Liu, Paul Harris, Karl Nieman, Nikhil Kundargi, Ian Wong, Fredrik Tufvesson, Viktor Öwall, Ove Edfors

Abstract: This paper sets up a framework for designing a massive multiple-input multiple-output (MIMO) testbed by investigating hardware (HW) and system-level requirements such as processing complexity, duplexing mode and frame structure. Taking these into account, a generic system and processing partitioning is proposed which allows flexible scaling and processing distribution onto a multitude of physicall… ▽ More This paper sets up a framework for designing a massive multiple-input multiple-output (MIMO) testbed by investigating hardware (HW) and system-level requirements such as processing complexity, duplexing mode and frame structure. Taking these into account, a generic system and processing partitioning is proposed which allows flexible scaling and processing distribution onto a multitude of physically separated devices. Based on the given HW constraints such as maximum number of links and maximum throughput for peer-to-peer interconnections combined with processing capabilities, the framework allows to evaluate modular HW components. To verify our design approach, we present the LuMaMi (Lund University Massive MIMO) testbed which constitutes the first reconfigurable real-time HW platform for prototyping massive MIMO. Utilizing up to 100 base station antennas and more than 50 Field Programmable Gate Arrays, up to 12 user equipments are served on the same time/frequency resource using an LTE-like Orthogonal Frequency Division Multiplexing time-division duplex-based transmission scheme. Proof-of-concept tests with this system show that massive MIMO can simultaneously serve a multitude of users in a static indoor and static outdoor environment utilizing the same time/frequency resource. △ Less

Submitted 16 May, 2017; v1 submitted 20 December, 2016; originally announced January 2017.

Comments: 15 pages, accepted for publication in IEEE Access

An Energy Efficiency Perspective on Massive MIMO Quantization

Authors: Muris Sarajlić, Liang Liu, Ove Edfors

Abstract: One of the basic aspects of Massive MIMO (MaMi) that is in the focus of current investigations is its potential of using low-cost and energy-efficient hardware. It is often claimed that MaMi will allow for using analog-to-digital converters (ADCs) with very low resolutions and that this will result in overall improvement of energy efficiency. In this contribution, we perform a parametric energy ef… ▽ More One of the basic aspects of Massive MIMO (MaMi) that is in the focus of current investigations is its potential of using low-cost and energy-efficient hardware. It is often claimed that MaMi will allow for using analog-to-digital converters (ADCs) with very low resolutions and that this will result in overall improvement of energy efficiency. In this contribution, we perform a parametric energy efficiency analysis of MaMi uplink for the entire base station receiver system with varying ADC resolutions. The analysis shows that, for a wide variety of system parameters, ADCs with intermediate bit resolutions (4 - 10 bits) are optimal in energy efficiency sense, and that using very low bit resolutions results in degradation of energy efficiency. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Comments: To be published in Proceedings of 50th Asilomar Conference on Signals, Systems and Computers

Reciprocity Calibration for Massive MIMO: Proposal, Modeling and Validation

Authors: Joao Vieira, Fredrik Rusek, Ove Edfors, Steffen Malkowsky, Liang Liu, Fredrik Tufvesson

Abstract: This paper presents a mutual coupling based calibration method for time-division-duplex massive MIMO systems, which enables downlink precoding based on uplink channel estimates. The entire calibration procedure is carried out solely at the base station (BS) side by sounding all BS antenna pairs. An Expectation-Maximization (EM) algorithm is derived, which processes the measured channels in order t… ▽ More This paper presents a mutual coupling based calibration method for time-division-duplex massive MIMO systems, which enables downlink precoding based on uplink channel estimates. The entire calibration procedure is carried out solely at the base station (BS) side by sounding all BS antenna pairs. An Expectation-Maximization (EM) algorithm is derived, which processes the measured channels in order to estimate calibration coefficients. The EM algorithm outperforms current state-of-the-art narrow-band calibration schemes in a mean squared error (MSE) and sum-rate capacity sense. Like its predecessors, the EM algorithm is general in the sense that it is not only suitable to calibrate a co-located massive MIMO BS, but also very suitable for calibrating multiple BSs in distributed MIMO systems. The proposed method is validated with experimental evidence obtained from a massive MIMO testbed. In addition, we address the estimated narrow-band calibration coefficients as a stochastic process across frequency, and study the subspace of this process based on measurement data. With the insights of this study, we propose an estimator which exploits the structure of the process in order to reduce the calibration error across frequency. A model for the calibration error is also proposed based on the asymptotic properties of the estimator, and is validated with measurement results. △ Less

Submitted 21 February, 2017; v1 submitted 16 June, 2016; originally announced June 2016.

Comments: Submitted to IEEE Transactions on Wireless Communications, 21/Feb/2017

Improving practical sensitivity of energy optimized wake-up receivers: proof of concept in 65nm CMOS

Authors: Nafiseh Seyed Mazloum, Joachim Neves Rodrigues, Oskar Andersson, Anders Nejdel, Ove Edfors

Abstract: We present a high performance low-power digital base-band architecture, specially designed for an energy optimized duty-cycled wake-up receiver scheme. Based on a careful wake-up beacon design, a structured wake-up beacon detection technique leads to an architecture that compensates for the implementation loss of a low-power wake-up receiver front-end at low energy and area costs. Design parameter… ▽ More We present a high performance low-power digital base-band architecture, specially designed for an energy optimized duty-cycled wake-up receiver scheme. Based on a careful wake-up beacon design, a structured wake-up beacon detection technique leads to an architecture that compensates for the implementation loss of a low-power wake-up receiver front-end at low energy and area costs. Design parameters are selected by energy optimization and the architecture is easily scalable to support various network sizes. Fabricated in 65nm CMOS, the digital base-band consumes 0.9uW (V_DD=0.37V) in sub-threshold operation at 250kbps, with appropriate 97% wake-up beacon detection and 0.04% false alarm probabilities. The circuit is fully functional at a minimum V_DD of 0.23V at f_max=5kHz and 0.018uW power consumption. Based on these results we show that our digital base-band can be used as a companion to compensate for front-end implementation losses resulting from the limited wake-up receiver power budget at a negligible cost. This implies an improvement of the practical sensitivity of the wake-up receiver, compared to what is traditionally reported. △ Less

Submitted 30 April, 2016; originally announced May 2016.

Comments: Submitted to IEEE Sensors Journal

Massive MIMO in Real Propagation Environments: Do All Antennas Contribute Equally?

Authors: Xiang Gao, Ove Edfors, Fredrik Tufvesson, Erik G. Larsson

Abstract: Massive MIMO can greatly increase both spectral and transmit-energy efficiency. This is achieved by allowing the number of antennas and RF chains to grow very large. However, the challenges include high system complexity and hardware energy consumption. Here we investigate the possibilities to reduce the required number of RF chains, by performing antenna selection. While this approach is not a ve… ▽ More Massive MIMO can greatly increase both spectral and transmit-energy efficiency. This is achieved by allowing the number of antennas and RF chains to grow very large. However, the challenges include high system complexity and hardware energy consumption. Here we investigate the possibilities to reduce the required number of RF chains, by performing antenna selection. While this approach is not a very effective strategy for theoretical independent Rayleigh fading channels, a substantial reduction in the number of RF chains can be achieved for real massive MIMO channels, without significant performance loss. We evaluate antenna selection performance on measured channels at 2.6 GHz, using a linear and a cylindrical array, both having 128 elements. Sum-rate maximization is used as the criterion for antenna selection. A selection scheme based on convex optimization is nearly optimal and used as a benchmark. The achieved sum-rate is compared with that of a very simple scheme that selects the antennas with the highest received power. The power-based scheme gives performance close to the convex optimization scheme, for the measured channels. This observation indicates a potential for significant reductions of massive MIMO implementation complexity, by reducing the number of RF chains and performing antenna selection using simple algorithms. △ Less

Submitted 21 July, 2015; originally announced July 2015.

Comments: Submitted to IEEE Transactions on Communications

Massive MIMO performance evaluation based on measured propagation data

Authors: Xiang Gao, Ove Edfors, Fredrik Rusek, Fredrik Tufvesson

Abstract: Massive MIMO, also known as very-large MIMO or large-scale antenna systems, is a new technique that potentially can offer large network capacities in multi-user scenarios. With a massive MIMO system, we consider the case where a base station equipped with a large number of antenna elements simultaneously serves multiple single-antenna users in the same time-frequency resource. So far, investigatio… ▽ More Massive MIMO, also known as very-large MIMO or large-scale antenna systems, is a new technique that potentially can offer large network capacities in multi-user scenarios. With a massive MIMO system, we consider the case where a base station equipped with a large number of antenna elements simultaneously serves multiple single-antenna users in the same time-frequency resource. So far, investigations are mostly based on theoretical channels with independent and identically distributed (i.i.d.) complex Gaussian coefficients, i.e., i.i.d. Rayleigh channels. Here, we investigate how massive MIMO performs in channels measured in real propagation environments. Channel measurements were performed at 2.6 GHz using a virtual uniform linear array (ULA) which has a physically large aperture, and a practical uniform cylindrical array (UCA) which is more compact in size, both having 128 antenna ports. Based on measurement data, we illustrate channel behavior of massive MIMO in three representative propagation conditions, and evaluate the corresponding performance. The investigation shows that the measured channels, for both array types, allow us to achieve performance close to that in i.i.d. Rayleigh channels. It is concluded that in real propagation environments we have characteristics that can allow for efficient use of massive MIMO, i.e., the theoretical advantages of this new technology can also be harvested in real channels. △ Less

Submitted 8 April, 2015; v1 submitted 13 March, 2014; originally announced March 2014.

Comments: IEEE Transactions on Wireless Communications, 2015

An Information Theoretic Charachterization of Channel Shortening Receivers

Authors: Fredrik Rusek, Ove Edfors

Abstract: Optimal data detection of data transmitted over a linear channel can always be implemented through the Viterbi algorithm (VA). However, in many cases of interest the memory of the channel prohibits application of the VA. A popular and conceptually simple method in this case, studied since the early 70s, is to first filter the received signal in order to shorten the memory of the channel, and then… ▽ More Optimal data detection of data transmitted over a linear channel can always be implemented through the Viterbi algorithm (VA). However, in many cases of interest the memory of the channel prohibits application of the VA. A popular and conceptually simple method in this case, studied since the early 70s, is to first filter the received signal in order to shorten the memory of the channel, and then to apply a VA that operates with the shorter memory. We shall refer to this as a channel shortening (CS) receiver. Although studied for almost four decades, an information theoretic understanding of what such a simple receiver solution is actually doing is not available. In this paper we will show that an optimized CS receiver is implementing the chain rule of mutual information, but only up to the shortened memory that the receiver is operating with. Further, we will show that the tools for analyzing the ensuing achievable rates from an optimized CS receiver are precisely the same as those used for analyzing the achievable rates of a minimum mean square error (MMSE) receiver. △ Less

Submitted 28 February, 2014; originally announced February 2014.

Massive MIMO for Next Generation Wireless Systems

Authors: Erik G. Larsson, Ove Edfors, Fredrik Tufvesson, Thomas L. Marzetta

Abstract: Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over conventional point-to-point MIMO: it works with cheap single-antenna terminals, a rich scattering environment is not required, and resource allocation is simplified because every active terminal utilizes all of the time-frequency bins. However, multi-user MIMO, as originally envisioned with roughly equal numbers of service… ▽ More Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over conventional point-to-point MIMO: it works with cheap single-antenna terminals, a rich scattering environment is not required, and resource allocation is simplified because every active terminal utilizes all of the time-frequency bins. However, multi-user MIMO, as originally envisioned with roughly equal numbers of service-antennas and terminals and frequency division duplex operation, is not a scalable technology. Massive MIMO (also known as "Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension MIMO" & "ARGOS") makes a clean break with current practice through the use of a large excess of service-antennas over active terminals and time division duplex operation. Extra antennas help by focusing energy into ever-smaller regions of space to bring huge improvements in throughput and radiated energy efficiency. Other benefits of massive MIMO include the extensive use of inexpensive low-power components, reduced latency, simplification of the media access control (MAC) layer, and robustness to intentional jamming. The anticipated throughput depend on the propagation environment providing asymptotically orthogonal channels to the terminals, but so far experiments have not disclosed any limitations in this regard. While massive MIMO renders many traditional research problems irrelevant, it uncovers entirely new problems that urgently need attention: the challenge of making many low-cost low-precision components that work effectively together, acquisition and synchronization for newly-joined terminals, the exploitation of extra degrees of freedom provided by the excess of service-antennas, reducing internal power consumption to achieve total energy efficiency reductions, and finding new deployment scenarios. This paper presents an overview of the massive MIMO concept and contemporary research. △ Less

Submitted 21 January, 2014; v1 submitted 24 April, 2013; originally announced April 2013.

Comments: Final manuscript, to appear in IEEE Communications Magazine

Journal ref: IEEE Communications Magazine, Vol. 52, No. 2, pp. 186-195, Feb. 2014

Scaling up MIMO: Opportunities and Challenges with Very Large Arrays

Authors: Fredrik Rusek, Daniel Persson, Buon Kiong Lau, Erik G. Larsson, Thomas L. Marzetta, Ove Edfors, Fredrik Tufvesson

Abstract: This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerge… ▽ More This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus. △ Less

Submitted 16 January, 2012; originally announced January 2012.

Comments: Accepted for publication in the IEEE Signal Processing Magazine, October 2011