Showing 1–37 of 37 results for author: Eaton, M

Antibunched emission from femtosecond laser-written nano-ablations on gallium nitride

Authors: Yanzhao Guo, Giulio Coccia, John P. Hadden, Shane M. Eaton, Anthony J. Bennett

Abstract: Femtosecond laser-writing offers distinct capabilities for fabrication, including three-dimensional, multi-material, and sub-diffraction-limited patterning. In particular, demonstrations of laser-written quantum emitters and photonic devices with superior optical properties have attracted attention. Recently, gallium nitride (GaN) has been reported to host quantum emitters with narrow and bright z… ▽ More Femtosecond laser-writing offers distinct capabilities for fabrication, including three-dimensional, multi-material, and sub-diffraction-limited patterning. In particular, demonstrations of laser-written quantum emitters and photonic devices with superior optical properties have attracted attention. Recently, gallium nitride (GaN) has been reported to host quantum emitters with narrow and bright zero-phonon photoluminescence from ultraviolet to telecom ranges. However, emitters formed during epitaxy are randomly positioned, and until now, it has not been possible to fabricate quantum emitters in ordered arrays. In this paper, we employ femtosecond laser writing to create nano-ablations with sub-diffraction-limited diameter, and use rapid thermal annealing to activate co-located stable emitters. The emitters show MHz antibunched emission with a sharp spectral peak at room temperature. Our study not only presents an efficient approach to laser-written nanofabrication on GaN but also offers a promising pathway for the deterministic creation of quantum emitters in GaN, shedding light on the underlying mechanisms involved. △ Less

Submitted 14 May, 2025; originally announced May 2025.

Comments: 9 pages, 6 figures

Enhanced quantum magnetometry with a laser-written integrated photonic diamond chip

Authors: Yanzhao Guo, Giulio Coccia, Vinaya Kumar Kavatamane, Argyro N. Giakoumaki, Anton N. Vetlugin, Roberta Ramponi, Cesare Soci, Paul E. Barclay, John P. Hadden, Anthony J. Bennett, Shane M. Eaton

Abstract: An ensemble of negatively charged nitrogen-vacancy centers in diamond can act as a precise quantum sensor even under ambient conditions. In particular, to optimize thier sensitivity, it is crucial to increase the number of spins sampled and maximize their coupling to the detection system, without degrading their spin properties. In this paper, we demonstrate enhanced quantum magnetometry via a hig… ▽ More An ensemble of negatively charged nitrogen-vacancy centers in diamond can act as a precise quantum sensor even under ambient conditions. In particular, to optimize thier sensitivity, it is crucial to increase the number of spins sampled and maximize their coupling to the detection system, without degrading their spin properties. In this paper, we demonstrate enhanced quantum magnetometry via a high-quality buried laser-written waveguide in diamond with a 4.5 ppm density of nitrogen-vacancy centers. We show that the waveguide-coupled nitrogen-vacancy centers exhibit comparable spin coherence properties as that of nitrogen-vacancy centers in pristine diamond using time-domain optically detected magnetic resonance spectroscopy. Waveguide-enhanced magnetic field sensing is demonstrated in a fiber-coupled integrated photonic chip, where probing an increased volume of high-density spins results in 63 pT$.$Hz $^{-1/2}$ of DC-magnetic field sensitivity and 20 pT$.$Hz $^{-1/2}$ of AC magnetic field sensitivity. This on-chip sensor realizes at least an order of magnitude improvement in sensitivity compared to the conventional confocal detection setup, paving the way for microscale sensing with nitrogen-vacancy ensembles. △ Less

Submitted 5 February, 2025; v1 submitted 4 February, 2025; originally announced February 2025.

Comments: 9 pages, 3 figures, plus supplement

End-to-end switchless architecture for fault-tolerant photonic quantum computing

Authors: Paul Renault, Patrick Yard, Raphael C. Pooser, Miller Eaton, Hussain Asim Zaidi

Abstract: Photonics represents one of the most promising approaches to large-scale quantum computation with millions of qubits and billions of gates, owing to the potential for room-temperature operation, high clock speeds, miniaturization of photonic circuits, and repeatable fabrication processes in commercial photonic foundries. We present an end-to-end architecture for fault-tolerant continuous variable… ▽ More Photonics represents one of the most promising approaches to large-scale quantum computation with millions of qubits and billions of gates, owing to the potential for room-temperature operation, high clock speeds, miniaturization of photonic circuits, and repeatable fabrication processes in commercial photonic foundries. We present an end-to-end architecture for fault-tolerant continuous variable (CV) quantum computation using only passive on-chip components that can produce photonic qubits above the fault tolerance threshold with probabilities above 90%, and encodes logical qubits using physical qubits sampled from a distribution around the fault tolerance threshold. By requiring only low photon number resolution, the architecture enables the use of high-bandwidth photodetectors in CV quantum computing. Simulations of our qubit generation and logical encoding processes show a Gaussian cluster squeezing threshold of 12 dB to 13 dB. Additionally, we present a novel magic state generation protocol which requires only 13 dB of cluster squeezing to produce magic states with an order of magnitude higher probability than existing approaches, opening up the path to universal fault-tolerant quantum computation at less than 13 dB of cluster squeezing. △ Less

Submitted 7 January, 2025; v1 submitted 17 December, 2024; originally announced December 2024.

Optical and microstructural studies of femtosecond laser treated amorphous germanium thin coatings

Authors: L. Kotsedi, A. Abdelmalek, V. Bharadwaj, C. B. Mtshali, Z. Y. Nuru, B. Sotillo, G. Coccia, S. M. Eaton, R. Ramponi, El-H. Amara, M. Maaza

Abstract: The study of the relaxation mechanism of amorphous germanium after femtosecond laser irradiation is presented in this work. In particular, a thin germanium coating was deposited onto a glass substrate through the electron beam vacuum coating method. The substrate was kept at room temperature during the coating process, which resulted in a deposited layer characterized by an amorphous microstructur… ▽ More The study of the relaxation mechanism of amorphous germanium after femtosecond laser irradiation is presented in this work. In particular, a thin germanium coating was deposited onto a glass substrate through the electron beam vacuum coating method. The substrate was kept at room temperature during the coating process, which resulted in a deposited layer characterized by an amorphous microstructure, as observed from the X-ray diffraction. The germanium layer was then irradiated with a femtosecond laser at 1030 nm wavelength, while varying the net fluence from 15 J cm-2 to 90 J cm-2. Moreover, an extended two temperature model was used to extract the electronic and lattice temperature of the laser heated germanium coating, showing a 32% contribution from heating due to the thermal accumulation effect. The microstructural and morphological studies of the irradiated samples were carried out using X-ray diffraction and high-resolution scanning electron microscopy. From the X-ray diffraction results, it was observed that at higher laser fluence there is an emergence of crystallinity on the germanium layer, with no evidence of oxidation. On the surface, the morphology was observed to evolve to granular sphere, attributed to melting of the material. Finally, an increase in absorbance with laser fluence was observed and the optical band gap of the coating was calculated. △ Less

Submitted 21 August, 2024; originally announced August 2024.

Comments: 21 pages, 9 figures

Vector Magnetometry Using Shallow Implanted NV Centers in Diamond with Waveguide-Assisted Dipole Excitation and Readout

Authors: Sajedeh Shahbazi, Giulio Coccia, Argyro N. Giakoumaki, Johannes Lang, Vibhav Bharadwaj, Fedor Jelezko, Roberta Ramponi, Anthony J. Bennett, John P. Hadden, Shane M. Eaton, Alexander Kubanek

Abstract: On-chip magnetic field sensing with Nitrogen-Vacancy (NV) centers in diamond requires scalable integration of 3D waveguides into diamond substrates. Here, we develop a sensing array device with an ensemble of shallow implanted NV centers integrated with arrays of laser-written waveguides for excitation and readout of NV signals. Our approach enables an easy-to-operate on-chip magnetometer with a p… ▽ More On-chip magnetic field sensing with Nitrogen-Vacancy (NV) centers in diamond requires scalable integration of 3D waveguides into diamond substrates. Here, we develop a sensing array device with an ensemble of shallow implanted NV centers integrated with arrays of laser-written waveguides for excitation and readout of NV signals. Our approach enables an easy-to-operate on-chip magnetometer with a pixel size proportional to the Gaussian mode area of each waveguide. The performed continuous wave optically detected magnetic resonance on each waveguide gives an average dc-sensitivity value of $195 \pm 3 {nT}/\sqrt{Hz}$, which can be improved with lock-in-detection or pulsed-microwave sequences. We apply a magnetic field to separate the four NV crystallographic orientations of the magnetic resonance and then utilize a DC current through a straight wire antenna close to the waveguide to prove the sensor capabilities of our device. We reconstruct the complete vector magnetic field in the NV crystal frame using three different NV crystallographic orientations. By knowing the polarization axis of the waveguide mode, we project the magnetic field vector into the lab frame. △ Less

Submitted 4 February, 2025; v1 submitted 26 July, 2024; originally announced July 2024.

Laser-written waveguide-integrated coherent spins in diamond

Authors: Yanzhao Guo, John P. Hadden, Federico Gorrini, Giulio Coccia, Vibhav Bharadwaj, Vinaya Kumar Kavatamane, Mohammad Sahnawaz Alam, Roberta Ramponi, Paul E. Barclay, Andrea Chiappini, Maurizio Ferrari, Alexander Kubanek, Angelo Bifone, Shane M. Eaton, Anthony J. Bennett

Abstract: Quantum emitters, such as the negatively charged nitrogen-vacancy center in diamond, are attractive for quantum technologies such as nano-sensing, quantum information processing, and as a non-classical light source. However, it is still challenging to position individual emitters in photonic structures whilst preserving the spin coherence properties of the defect. In this paper, we investigate sin… ▽ More Quantum emitters, such as the negatively charged nitrogen-vacancy center in diamond, are attractive for quantum technologies such as nano-sensing, quantum information processing, and as a non-classical light source. However, it is still challenging to position individual emitters in photonic structures whilst preserving the spin coherence properties of the defect. In this paper, we investigate single and ensemble waveguide-integrated nitrogen-vacancy centers in diamond fabricated by femtosecond laser writing followed by thermal annealing. Their spin coherence properties are systematically investigated and are shown to be comparable to native nitrogen-vacancy centers in diamond. This method paves the way for the fabrication of coherent spins integrated within photonic devices. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 9 pages, 5 figures

Journal ref: APL Photonics 9, 076103 (2024)

Determining Strain Components in a Diamond Waveguide from Zero-Field ODMR Spectra of NV$^{-}$ Center Ensembles

Authors: M. Sahnawaz Alam, Federico Gorrini, Michał Gawełczyk, Daniel Wigger, Giulio Coccia, Yanzhao Guo, Sajedeh Shahbazi, Vibhav Bharadwaj, Alexander Kubanek, Roberta Ramponi, Paul E. Barclay, Anthony J. Bennett, John P. Hadden, Angelo Bifone, Shane M. Eaton, Paweł Machnikowski

Abstract: The negatively charged nitrogen-vacancy (NV$^{-}$) center in diamond has shown great potential in nanoscale sensing and quantum information processing due to its rich spin physics. An efficient coupling with light, providing strong luminescence, is crucial for realizing these applications. Laser-written waveguides in diamond promote NV$^{-}$ creation and improve their coupling to light but, at the… ▽ More The negatively charged nitrogen-vacancy (NV$^{-}$) center in diamond has shown great potential in nanoscale sensing and quantum information processing due to its rich spin physics. An efficient coupling with light, providing strong luminescence, is crucial for realizing these applications. Laser-written waveguides in diamond promote NV$^{-}$ creation and improve their coupling to light but, at the same time, induce strain in the crystal. The induced strain contributes to light guiding but also affects the energy levels of NV$^{-}$ centers. We probe NV$^{-}$ spin states experimentally with the commonly used continuous-wave zero-field optically detected magnetic resonance (ODMR). In our waveguides, the ODMR spectra are shifted, split, and consistently asymmetric, which we attribute to the impact of local strain. To understand these features, we model ensemble ODMR signals in the presence of strain. By fitting the model results to the experimentally collected ODMR data, we determine the strain tensor components at different positions, thus determining the strain profile across the waveguide. This shows that zero-field ODMR spectroscopy can be used as a strain imaging tool. The resulting strain within the waveguide is dominated by a compressive axial component transverse to the waveguide structure, with a smaller contribution from vertical and shear strain components. △ Less

Submitted 12 August, 2024; v1 submitted 9 February, 2024; originally announced February 2024.

Comments: 12 pages, 7 figures + Supplementary Information (6 pages, 3 figures)

Toward coherent quantum computation of scattering amplitudes with a measurement-based photonic quantum processor

Authors: Raúl A. Briceño, Robert G. Edwards, Miller Eaton, Carlos González-Arciniegas, Olivier Pfister, George Siopsis

Abstract: In recent years, applications of quantum simulation have been developed to study properties of strongly interacting theories. This has been driven by two factors: on the one hand, needs from theorists to have access to physical observables that are prohibitively difficult to study using classical computing; on the other hand, quantum hardware becoming increasingly reliable and scalable to larger s… ▽ More In recent years, applications of quantum simulation have been developed to study properties of strongly interacting theories. This has been driven by two factors: on the one hand, needs from theorists to have access to physical observables that are prohibitively difficult to study using classical computing; on the other hand, quantum hardware becoming increasingly reliable and scalable to larger systems. In this work, we discuss the feasibility of using quantum optical simulation for studying scattering observables that are presently inaccessible via lattice QCD and are at the core of the experimental program at Jefferson Lab, the future Electron-Ion Collider, and other accelerator facilities. We show that recent progress in measurement-based photonic quantum computing can be leveraged to provide deterministic generation of required exotic gates and implementation in a single photonic quantum processor. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Comments: 26 pages, 7 figures

A Kronecker product accelerated efficient sparse Gaussian Process (E-SGP) for flow emulation

Authors: Yu Duan, Matthew Eaton, Michael Bluck

Abstract: In this paper, we introduce an efficient sparse Gaussian process (E-SGP) for the surrogate modelling of fluid mechanics. This novel Bayesian machine learning algorithm allows efficient model training using databases of different structures. It is a further development of the approximated sparse GP algorithm, combining the concept of efficient GP (E-GP) and variational energy free sparse Gaussian p… ▽ More In this paper, we introduce an efficient sparse Gaussian process (E-SGP) for the surrogate modelling of fluid mechanics. This novel Bayesian machine learning algorithm allows efficient model training using databases of different structures. It is a further development of the approximated sparse GP algorithm, combining the concept of efficient GP (E-GP) and variational energy free sparse Gaussian process (VEF-SGP). The developed E-SGP approach exploits the arbitrariness of inducing points and the monotonically increasing nature of the objective function with respect to the number of inducing points in VEF-SGP. By specifying the inducing points on the orthogonal grid/input subspace and using the Kronecker product, E-SGP significantly improves computational efficiency without imposing any constraints on the covariance matrix or increasing the number of parameters that need to be optimised during training. The E-SGP algorithm developed in this paper outperforms E-GP not only in scalability but also in model quality in terms of mean standardized logarithmic loss (MSLL). The computational complexity of E-GP suffers from the cubic growth regarding the growing structured training database. However, E-SGP maintains computational efficiency whilst the resolution of the model, (i.e., the number of inducing points) remains fixed. The examples show that E-SGP produces more accurate predictions in comparison with E-GP when the model resolutions are similar in both. E-GP benefits from more training data but comes with higher computational demands, while E-SGP achieves a comparable level of accuracy but is more computationally efficient, making E-SGP a potentially preferable choice for fluid mechanic problems. Furthermore, E-SGP can produce more reasonable estimates of model uncertainty, whilst E-GP is more likely to produce over-confident predictions. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Resolution of 100 photons and quantum generation of unbiased random numbers

Authors: Miller Eaton, Amr Hossameldin, Richard J. Birrittella, Paul M. Alsing, Christopher C. Gerry, Hai Dong, Chris Cuevas, Olivier Pfister

Abstract: Macroscopic quantum phenomena, such as observed in superfluids and superconductors, have led to promising technological advancements and some of the most important tests of fundamental physics. At present, quantum detection of light is mostly relegated to the microscale, where avalanche photodiodes are very sensitive to distinguishing single-photon events from vacuum but cannot differentiate betwe… ▽ More Macroscopic quantum phenomena, such as observed in superfluids and superconductors, have led to promising technological advancements and some of the most important tests of fundamental physics. At present, quantum detection of light is mostly relegated to the microscale, where avalanche photodiodes are very sensitive to distinguishing single-photon events from vacuum but cannot differentiate between larger photon-number events. Beyond this, the ability to perform measurements to resolve photon numbers is highly desirable for a variety of quantum information applications including computation, sensing, and cryptography. True photon-number resolving detectors do exist, but they are currently limited to the ability to resolve on the order of 10 photons, which is too small for several quantum state generation methods based on heralded detection. In this work, we extend photon measurement into the mesoscopic regime by implementing a detection scheme based on multiplexing highly quantum-efficient transition-edge sensors to accurately resolve photon numbers between zero and 100. We then demonstrate the use of our system by implementing a quantum random number generator with no inherent bias. This method is based on sampling a coherent state in the photon-number basis and is robust against environmental noise, phase and amplitude fluctuations in the laser, loss and detector inefficiency as well as eavesdropping. Beyond true random number generation, our detection scheme serves as a means to implement quantum measurement and engineering techniques valuable for photonic quantum information processing. △ Less

Submitted 28 October, 2022; v1 submitted 2 May, 2022; originally announced May 2022.

Comments: 16 pages, 9 figures

Measurement-based generation and preservation of cat and grid states within a continuous-variable cluster state

Authors: Miller Eaton, Carlos González-Arciniegas, Rafael N. Alexander, Nicolas C. Menicucci, Olivier Pfister

Abstract: We present an algorithm to reliably generate various quantum states critical to quantum error correction and universal continuous-variable (CV) quantum computing, such as Schrödinger cat states and Gottesman-Kitaev-Preskill (GKP) grid states, out of Gaussian CV cluster states. Our algorithm is based on the Photon-counting-Assisted Node-Teleportation Method (PhANTM), which uses standard Gaussian in… ▽ More We present an algorithm to reliably generate various quantum states critical to quantum error correction and universal continuous-variable (CV) quantum computing, such as Schrödinger cat states and Gottesman-Kitaev-Preskill (GKP) grid states, out of Gaussian CV cluster states. Our algorithm is based on the Photon-counting-Assisted Node-Teleportation Method (PhANTM), which uses standard Gaussian information processing on the cluster state with the only addition of local photon-number-resolving measurements. We show that PhANTM can apply polynomial gates and embed cat states within the cluster. This method stabilizes cat states against Gaussian noise and perpetuates non-Gaussianity within the cluster. We show that existing protocols for breeding cat states can be embedded into cluster state processing using PhANTM. △ Less

Submitted 11 July, 2022; v1 submitted 19 December, 2021; originally announced December 2021.

Comments: Accepted for publication in Quantum, July 06 2022. 30 pages, 13 figures

Journal ref: Quantum 6, 769 (2022)

On-chip single-photon subtraction by individual silicon vacancy centers in a laser-written diamond waveguide

Authors: Michael K. Koch, Michael Hoese, Vibhav Bharadwaj, Johannes Lang, John P. Hadden, Roberta Ramponi, Fedor Jelezko, Shane M. Eaton, Alexander Kubanek

Abstract: Modifying light fields at single-photon level is a key challenge for upcoming quantum technologies and can be realized in a scalable manner through integrated quantum photonics. Laser-written diamond photonics offers three-dimensional fabrication capabilities and large mode-field diameters matched to fiber optic technology, though limiting the cooperativity at the single-emitter level. To realize… ▽ More Modifying light fields at single-photon level is a key challenge for upcoming quantum technologies and can be realized in a scalable manner through integrated quantum photonics. Laser-written diamond photonics offers three-dimensional fabrication capabilities and large mode-field diameters matched to fiber optic technology, though limiting the cooperativity at the single-emitter level. To realize large cooperativities, we combine excitation of single shallow-implanted silicon vacancy centers via large numerical aperture optics with detection assisted by laser-written type-II waveguides. We demonstrate single-emitter extinction measurements with a cooperativity of 0.153 and a beta factor of 13% yielding 15.3% as lower bound for the quantum efficiency of a single emitter. The transmission of resonant photons reveals single-photon subtraction from a quasi-coherent field resulting in super-Poissonian light statistics. Our architecture enables single quantum level light field engineering in an integrated design which can be fabricated in three dimensions and with a natural connectivity to optical fiber arrays. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Comments: 8 pages, 4 figures

Proposal for a quantum random number generator using coherent light an a non-classical observable

Authors: Christopher C. Gerry, Richard J. Birrittella, Paul M. Alsing, Amr Hossameldin, Miller Eaton, Olivier Pfister

Abstract: The prototype quantum random number (random bit) generators (QRNG) consists of one photon at a time falling on a $50:50$ beam splitter followed by random detection in one or the other other output beams due to the irreducible probabilistic nature of quantum mechanics. Due to the difficulties in producing single photons on demand, in practice, pulses of weak coherent (laser) light are used. In this… ▽ More The prototype quantum random number (random bit) generators (QRNG) consists of one photon at a time falling on a $50:50$ beam splitter followed by random detection in one or the other other output beams due to the irreducible probabilistic nature of quantum mechanics. Due to the difficulties in producing single photons on demand, in practice, pulses of weak coherent (laser) light are used. In this paper we take a different approach, one that uses moderate coherent light. It is shown that a QRNG can be implemented by performing photon-number parity measurements. For moderate coherent light, the probabilities for obtaining even or odd parity in photon counts are $0.5$ each. Photon counting with single-photon resolution can be performed through use of a cascade of beam splitters and single-photon detectors as was done recently in a photon-number parity-based interferometry experiment involving coherent light. △ Less

Submitted 18 February, 2022; v1 submitted 19 August, 2021; originally announced August 2021.

All-optical Quantum State Engineering for Rotation-symmetric Bosonic States

Authors: Rajveer Nehra, Miller Eaton, Olivier Pfister, Alireza Marandi

Abstract: Continuous-variable quantum information processing through quantum optics offers a promising platform for building the next generation of scalable fault-tolerant information processors. To achieve quantum computational advantages and fault tolerance, non-Gaussian resources are essential. In this work, we propose and analyze a method to generate a variety of non-Gaussian states using coherent photo… ▽ More Continuous-variable quantum information processing through quantum optics offers a promising platform for building the next generation of scalable fault-tolerant information processors. To achieve quantum computational advantages and fault tolerance, non-Gaussian resources are essential. In this work, we propose and analyze a method to generate a variety of non-Gaussian states using coherent photon subtraction from a two-mode squeezed state followed by photon-number-resolving measurements. The proposed method offers a promising way to generate rotation-symmetric states conventionally used for quantum error correction with binomial codes and truncated Schrödinger cat codes. We consider the deleterious effects of experimental imperfections such as detection inefficiencies and losses in the state engineering protocol. Our method can be readily implemented with current quantum photonic technologies. △ Less

Submitted 23 May, 2021; originally announced May 2021.

Comments: 20 pages, 8 figures

An integrated magnetometry platform with stackable waveguide-assisted detection channels for sensing arrays

Authors: Michael Hoese, Michael K. Koch, Vibhav Bharadwaj, Johannes Lang, John P. Hadden, Reina Yoshizaki, Argyro N. Giakoumaki, Roberta Ramponi, Fedor Jelezko, Shane M. Eaton, Alexander Kubanek

Abstract: The negatively-charged NV$^-$-center in diamond has shown great success in nanoscale, high-sensitivity magnetometry. Efficient fluorescence detection is crucial for improving the sensitivity. Furthermore, integrated devices enable practicable sensors. Here, we present a novel architecture which allows us to create NV$^-$-centers a few nanometers below the diamond surface, and at the same time in t… ▽ More The negatively-charged NV$^-$-center in diamond has shown great success in nanoscale, high-sensitivity magnetometry. Efficient fluorescence detection is crucial for improving the sensitivity. Furthermore, integrated devices enable practicable sensors. Here, we present a novel architecture which allows us to create NV$^-$-centers a few nanometers below the diamond surface, and at the same time in the mode field maximum of femtosecond-laser-written type-II waveguides. We experimentally verify the coupling efficiency, showcase the detection of magnetic resonance signals through the waveguides and perform first proof-of-principle experiments in magnetic field and temperature sensing. The sensing task can be operated via the waveguide without direct light illumination through the sample, which marks an important step for magnetometry in biological systems which are fragile to light. In the future, our approach will enable the development of two-dimensional sensing arrays facilitating spatially and temporally correlated magnetometry. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 10 pages, 4 figures

Journal ref: Phys. Rev. Applied 15, 054059 (2021)

Laser-Inscribed Diamond Waveguide Resonantly Coupled to Diamond Microsphere

Authors: Nurperi Yavuz, Mustafa Mert Bayer, Hüseyin Ozan Cirkinoğlu, Ali Serpengüzel, Thien Le Phu, Argyro Giakoumaki, Vibhav Bharadwaj, Roberta Ramponi, Shane M. Eaton

Abstract: An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve stress-induced waveguiding. Transverse electrically and transverse magnetically polarized light from a tunable laser operating in the near-infrared region was i… ▽ More An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve stress-induced waveguiding. Transverse electrically and transverse magnetically polarized light from a tunable laser operating in the near-infrared region was injected into the diamond waveguide, which when coupled to the diamond microsphere showed whispering-gallery modes with a spacing of 0.33 nm and high-quality factors of 105. By carefully engineering these high-quality factor resonances, and further exploiting the properties of existing nitrogen-vacancy centers in diamond microspheres and diamond waveguides in such configurations, it should be possible to realize filtering, sensing and nonlinear optical applications in integrated diamond photonics. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Fixed Inducing Points Online Bayesian Calibration for Computer Models with an Application to a Scale-Resolving CFD Simulation

Authors: Yu Duan, Matthew Eaton, Michael Bluck

Abstract: This paper proposes a novel fixed inducing points online Bayesian calibration (FIPO-BC) algorithm to efficiently learn the model parameters using a benchmark database. The standard Bayesian calibration (STD-BC) algorithm provides a statistical method to calibrate the parameters of computationally expensive models. However, the STD-BC algorithm scales very badly with the number of data points and l… ▽ More This paper proposes a novel fixed inducing points online Bayesian calibration (FIPO-BC) algorithm to efficiently learn the model parameters using a benchmark database. The standard Bayesian calibration (STD-BC) algorithm provides a statistical method to calibrate the parameters of computationally expensive models. However, the STD-BC algorithm scales very badly with the number of data points and lacks online learning capability. The proposed FIPO-BC algorithm greatly improves the computational efficiency and enables the online calibration by executing the calibration on a set of predefined inducing points. To demonstrate the procedure of the FIPO-BC algorithm, two tests are performed, finding the optimal value and exploring the posterior distribution of 1) the parameter in a simple function, and 2) the high-wave number damping factor in a scale-resolving turbulence model (SAS-SST). The results (such as the calibrated model parameter and its posterior distribution) of FIPO-BC with different inducing points are compared to those of STD-BC. It is found that FIPO-BC and STD-BC can provide very similar results, once the predefined set of inducing point in FIPO-BC is sufficiently fine. But, the FIPO-BC algorithm is at least ten times faster than the STD-BC algorithm. Meanwhile, the online feature of the FIPO-BC allows continuous updating of the calibration outputs and potentially reduces the workload on generating the database. △ Less

Submitted 15 September, 2020; originally announced September 2020.

Quantum micro-nano devices fabricated in diamond by femtosecond laser and ion irradiation

Authors: Shane M. Eaton, J. P. Hadden, Vibhav Bharadwaj, Jacopo Forneris, Federico Picollo, Federico Bosia, Belen Sotillo, Argyro N. Giakoumaki, Ottavia Jedrkiewicz, Andrea Chiappini, Maurizio Ferrari, Roberto Osellame, Paul E. Barclay, Paolo Olivero, Roberta Ramponi

Abstract: Diamond has attracted great interest as a quantum technology platform thanks to its optically active nitrogen vacancy center (NV). The NV's ground state spin can be read out optically exhibiting long spin coherence times of about 1 ms even at ambient temperatures. In addition, the energy levels of the NV are sensitive to external fields. These properties make NVs attractive as a scalable platform… ▽ More Diamond has attracted great interest as a quantum technology platform thanks to its optically active nitrogen vacancy center (NV). The NV's ground state spin can be read out optically exhibiting long spin coherence times of about 1 ms even at ambient temperatures. In addition, the energy levels of the NV are sensitive to external fields. These properties make NVs attractive as a scalable platform for efficient nanoscale resolution sensing based on electron spins and for quantum information systems. Diamond photonics enhances optical interaction with NVs, beneficial for both quantum sensing and information. Diamond is also compelling for microfluidic applications due to its outstanding biocompatibility, with sensing functionality provided by NVs. However, it remains a significant challenge to fabricate photonics, NVs and microfluidics in diamond. In this Report, an overview is provided of ion irradiation and femtosecond laser writing, two promising fabrication methods for diamond based quantum technological devices. The unique capabilities of both techniques are described, and the most important fabrication results of color center, optical waveguide and microfluidics in diamond are reported, with an emphasis on integrated devices aiming towards high performance quantum sensors and quantum information systems of tomorrow △ Less

Submitted 16 April, 2020; originally announced April 2020.

Generalized overlap quantum state tomography

Authors: Rajveer Nehra, Miller Eaton, Carlos González-Arciniegas, M. S. Kim, Thomas Gerrits, Adriana Lita, Sae Woo Nam, Olivier Pfister

Abstract: We propose and experimentally demonstrate a quantum state tomography protocol that generalizes the Wallentowitz-Vogel-Banaszek-Wódkiewicz point-by-point Wigner function reconstruction. The full density operator of an arbitrary quantum state is efficiently reconstructed in the Fock basis, using semidefinite programming, after interference with a small set of calibrated coherent states. This new pro… ▽ More We propose and experimentally demonstrate a quantum state tomography protocol that generalizes the Wallentowitz-Vogel-Banaszek-Wódkiewicz point-by-point Wigner function reconstruction. The full density operator of an arbitrary quantum state is efficiently reconstructed in the Fock basis, using semidefinite programming, after interference with a small set of calibrated coherent states. This new protocol is resource- and computationally efficient, is robust against noise, does not rely on approximate state displacements, and ensures the physicality of results. △ Less

Submitted 26 May, 2020; v1 submitted 31 October, 2019; originally announced November 2019.

Comments: 19 pages, 10 Figures

Journal ref: Phys. Rev. Research 2, 042002 (2020)

State-independent quantum tomography of a single-photon state by photon-number-resolving measurements

Authors: Rajveer Nehra, Aye Win, Miller Eaton, Niranjan Sridhar, Reihaneh Shahrokhshahi, Thomas Gerrits, Adriana Lita, Sae Woo Nam, Olivier Pfister

Abstract: The Wigner quasiprobability distribution of a narrowband single-photon state was reconstructed by quantum state tomography using photon-number-resolving measurements with transition-edge sensors (TES) at system efficiency 58(2)%. This method makes no assumptions on the nature of the measured state, save for the limitation on photon flux imposed by the TES. Negativity of the Wigner function was obs… ▽ More The Wigner quasiprobability distribution of a narrowband single-photon state was reconstructed by quantum state tomography using photon-number-resolving measurements with transition-edge sensors (TES) at system efficiency 58(2)%. This method makes no assumptions on the nature of the measured state, save for the limitation on photon flux imposed by the TES. Negativity of the Wigner function was observed in the raw data without any inference or correction for decoherence. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Comments: 10 pages, 7 figures

Journal ref: Optica 6, 1356-1360 (2019)

Non-Gaussian and Gottesman-Kitaev-Preskill state preparation by photon catalysis

Authors: Miller Eaton, Rajveer Nehra, Olivier Pfister

Abstract: Continuous-variable quantum-computing (CVQC) is the most scalable implementation of QC to date but requires non-Gaussian resources to allow exponential speedup and quantum correction, using error encoding such as Gottesman-Kitaev-Preskill (GKP) states. However, GKP state generation is still an experimental challenge. We show theoretically that photon catalysis, the interference of coherent states… ▽ More Continuous-variable quantum-computing (CVQC) is the most scalable implementation of QC to date but requires non-Gaussian resources to allow exponential speedup and quantum correction, using error encoding such as Gottesman-Kitaev-Preskill (GKP) states. However, GKP state generation is still an experimental challenge. We show theoretically that photon catalysis, the interference of coherent states with single-photon states followed by photon-number-resolved detection, is a powerful enabler for non-Gaussian quantum state engineering such as exactly displaced single-photon states and $M$-symmetric superpositions of squeezed vacuum (SSV), including squeezed cat states ($M=2$). By including photon-counting based state breeding, we demonstrate the potential to enlarge SSV states and produce GKP states. △ Less

Submitted 17 November, 2019; v1 submitted 5 March, 2019; originally announced March 2019.

Comments: 23 Pages, 12 figures

Journal ref: New Journal of Physics 21.11 (2019): 113034

Chromium Oxide Formation on Nanosecond and Femtosecond Laser Irradiated Thin Chromium Films

Authors: L. Kotsedi, V. Furlan, V. Bharadwaj, K. Kaviyarasu, B. Sotillo, C. B. Mtshali, N. Matinise, A. G. Demir, B. Previtali, R. Ramponi, S. M. Eaton, M. Maaza

Abstract: Thin coatings of Chromium oxide have been used for applications as absorbing material in solar cells, as protections for magnetic data recording devices and as shields in flexible solar cells. Thin coatings of pure chromium were vacuum deposited on a glass substrate using hot electrons from tungsten filament. These coatings were then treated with a nanosecond and femtosecond laser in ambient condi… ▽ More Thin coatings of Chromium oxide have been used for applications as absorbing material in solar cells, as protections for magnetic data recording devices and as shields in flexible solar cells. Thin coatings of pure chromium were vacuum deposited on a glass substrate using hot electrons from tungsten filament. These coatings were then treated with a nanosecond and femtosecond laser in ambient conditions. The microstructure, morphology and the color of the coatings treated with laser sources were modified and there was a formation of an oxide layer due to the heat dissipation on the chromium coating from the energetic photons. High-resolution scanning electron microscope studies showed the morphological evolution that are directly correlated with the laser fluence of both the nanosecond and femtosecond lasers. This morphological evolution was accompanied by the microstructural change as observed from the x-ray diffraction patterns, the chromaticity response of the coating was studied by UV-Vis spectrometer and the response of the coating in the visible region evolved with the laser fluences. The Rutherford backscattering depth profiling of the laser treated coatings revealed the diffusion of oxygen atoms in the coating as a result of laser treatment fluence. △ Less

Submitted 17 June, 2019; v1 submitted 5 February, 2019; originally announced February 2019.

Femtosecond laser inscription of nonlinear photonic circuits in Gallium Lanthanum Sulphide glass

Authors: María Ramos Vázquez, Belén Sotillo, Stefano Rampini, Vibhav Bharadwaj, Behrad Gholipour, Paloma Fernández, Roberta Ramponi, Cesare Soci, Shane M. Eaton

Abstract: We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the lase… ▽ More We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the laser-induced refractive index change in GLS. Nonlinear refractive index measurements of the waveguides were performed by finding the optical switching parameters of a directional coupler, demonstrating that the nonlinear properties were preserved, evidencing that GLS is a promising platform for laser-written integrated nonlinear photonics. △ Less

Submitted 27 August, 2018; v1 submitted 15 June, 2018; originally announced June 2018.

Femtosecond laser written diamond waveguides - a step towards integrated photonics in the far infrared

Authors: Vibhav Bharadwaj, Yuchen Wang, Toney Teddy Fernandez, Roberta Ramponi, Shane M. Eaton, Gianluca Galzerano

Abstract: A first demonstration and complete characterization of mid-infrared waveguides in diamond are reported in detail. Waveguides were designed for 2.4 um and 8.6 um waveguiding, with their group velocity dispersion was analyzed using femtosecond pulses at 2.4 um wavelength propagated through the waveguide and the bulk substrate. The total dispersion was found to be dominated by the bulk material rathe… ▽ More A first demonstration and complete characterization of mid-infrared waveguides in diamond are reported in detail. Waveguides were designed for 2.4 um and 8.6 um waveguiding, with their group velocity dispersion was analyzed using femtosecond pulses at 2.4 um wavelength propagated through the waveguide and the bulk substrate. The total dispersion was found to be dominated by the bulk material rather than the waveguide, and was on the range of 275 fs2/mm, demonstrating that femtosecond laser written modifications in diamond introduce negligible perturbations to the intrinsic material. △ Less

Submitted 28 June, 2018; v1 submitted 14 June, 2018; originally announced June 2018.

MSC Class: 78A60

VO$_2$ as a natural optical metamaterial

Authors: Miller Eaton, Alessandra Catellani, Arrigo Calzolari

Abstract: VO$_2$ is a unique phase change material with strongly anisotropic electronic properties. Recently, samples have been prepared that present a co-existence of phases and thus form metal-insulator junctions of the same chemical compound. Using first principles calculations, the optical properties of metallic and semiconducting VO$_2$ are here discussed to design self-contained natural optical metama… ▽ More VO$_2$ is a unique phase change material with strongly anisotropic electronic properties. Recently, samples have been prepared that present a co-existence of phases and thus form metal-insulator junctions of the same chemical compound. Using first principles calculations, the optical properties of metallic and semiconducting VO$_2$ are here discussed to design self-contained natural optical metamaterials, avoiding coupling with other dielectric media. The analysis of the optical properties complements the experiments in the description of the vast change in reflectance and metallicity for both disordered and planar compounds. The present results also predict the possibility to realize ordered VO$_2$ junctions operating as efficient hyperbolic metamaterials in the THz-visible range, by simply adjusting the ratio between metallic and insulating VO$_2$ content. The possibility to excite propagating {\em volume plasmom polariton} across the metamaterial is finally discussed. △ Less

Submitted 28 December, 2017; originally announced December 2017.

Comments: 10 pages, 8 figures

Polarized micro-Raman studies of femtosecond laser written stress-induced optical waveguides in diamond

Authors: B. Sotillo, A. Chiappini, V. Bharadwaj, J. P. Hadden, F. Bosia, P. Olivero, M. Ferrari, R. Ramponi, P. E. Barclay, S. M. Eaton

Abstract: Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond… ▽ More Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond laser in the crystal is derived from the measured stress in the waveguides. The results help to explain the waveguide polarization sensitive guiding mechanism, as well as providing a technique for their optimization. △ Less

Submitted 18 January, 2018; v1 submitted 24 November, 2017; originally announced November 2017.

Comments: 5 pages, 4 figures

Journal ref: Appl. Phys. Lett. 112, 031109 (2018)

Heisenberg-limited quantum interferometry with multi-photon subtracted twin beams

Authors: Miller Eaton, Rajveer Nehra, Aye Win, Olivier Pfister

Abstract: We propose a Heisenberg-limited quantum interferometer whose input is twin optical beams from which one or more photons have been indistinguishably subtracted. Such an interferometer can yield Heisenberg-limited performance while at the same time giving a direct fringe reading, unlike for the twin-beam input of the Holland-Burnett interferometer. We propose a feasible experimental realization usin… ▽ More We propose a Heisenberg-limited quantum interferometer whose input is twin optical beams from which one or more photons have been indistinguishably subtracted. Such an interferometer can yield Heisenberg-limited performance while at the same time giving a direct fringe reading, unlike for the twin-beam input of the Holland-Burnett interferometer. We propose a feasible experimental realization using a photon-number correlated source, such as non-degenerate parametric down-conversion, and perform realistic analyses of performance in the presence of loss and detector inefficiency. △ Less

Submitted 29 October, 2020; v1 submitted 24 July, 2017; originally announced July 2017.

Comments: 16 pages, 4 figures, submitted for publication. This is a major revision with a new idea compared to the previous version

Journal ref: Phys. Rev. A 103, 013726 (2021)

Femtosecond laser inscription of Bragg grating waveguides in bulk diamond

Authors: V. Bharadwaj, A. Courvoisier, T. T. Fernandez, R. Ramponi, G. Galzerano, J. Nunn, M. J. Booth, R. Osellame, S. M. Eaton, P. S. Salter

Abstract: Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating.… ▽ More Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating. This fabrication technology opens the way towards advanced 3D photonic networks in diamond for a range of applications. △ Less

Submitted 1 September, 2017; v1 submitted 29 May, 2017; originally announced May 2017.

Comments: 4 Pages, 5 figures

MSC Class: 00A79; 81Q37; 78A60 ACM Class: J.2

Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing

Authors: J. P. Hadden, V. Bharadwaj, B. Sotillo, S. Rampini, R. Osellame, J. Witmer, H. Jayakumar, T. T. Fernandez, A. Chiappini, C. Armellini, M. Ferrari, R. Ramponi, P. E. Barclay, S. M. Eaton

Abstract: Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until… ▽ More Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this work, we fabricate laser written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way towards on-chip optical routing of single photons between NVs and optically integrated spin-based sensing. △ Less

Submitted 12 March, 2018; v1 submitted 20 January, 2017; originally announced January 2017.

Journal ref: Optics Letters 43(15):pp. 3586-3589 (2018)

Viable route towards large-area two dimensional MoS2 using magnetron sputtering

Authors: Hassana Samassekou, Asma Alkabsh, Milinda Wasala, Miller Eaton, Aaron Walber, Andrew Walker, Olli Pitkänen, Krisztian Kordas, Saikat Talapatra, Thushari Jayasekera, Dipanjan Mazumdar

Abstract: Structural, interfacial, optical, and transport properties of large-area MoS2 ultra-thin films on BN-buffered silicon substrates fabricated using magnetron sputtering are investigated. A relatively simple growth strategy is demonstrated here that simultaneously promotes superior interfacial and bulk MoS2 properties. Few layers of MoS2 are established using X-ray reflectivity, diffraction, ellipsom… ▽ More Structural, interfacial, optical, and transport properties of large-area MoS2 ultra-thin films on BN-buffered silicon substrates fabricated using magnetron sputtering are investigated. A relatively simple growth strategy is demonstrated here that simultaneously promotes superior interfacial and bulk MoS2 properties. Few layers of MoS2 are established using X-ray reflectivity, diffraction, ellipsometry, and Raman spectroscopy measurements. Layer-specific modeling of optical constants shows very good agreement with first-principles calculations. Conductivity measurements reveal that few-layer MoS2 films are more conducting than many-layer films. Photo-conductivity measurements reveal that the sputter deposited MoS2 films compare favorably with other large-area methods. Our work illustrates that sputtering is a viable route for large-area device applications using transition metal dichalcogenides. △ Less

Submitted 23 November, 2016; v1 submitted 24 May, 2016; originally announced May 2016.

Comments: 19 pages including figures

Journal ref: 2D Materials 4 021002 (2017)

Diamond photonics platform enabled by femtosecond laser writing

Authors: Belen Sotillo, Vibhav Bharadwaj, J. P. Hadden, Masaaki Sakakura, Andrea Chiappini, Toney Teddy Fernandez, Stefano Longhi, Ottavia Jedrkiewicz, Yasuhiko Shimotsuma, Luigino Criante, Roberto Osellame, Gianluca Galzerano, Maurizio Ferrari, Kiyotaka Miura, Roberta Ramponi, Paul E. Barclay, Shane Michael Eaton

Abstract: We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems. We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems. △ Less

Submitted 21 October, 2016; v1 submitted 6 May, 2016; originally announced May 2016.

Comments: 24 pages, 6 figures

MSC Class: 00A79; 81Q37; 78A60 ACM Class: J.2

Journal ref: Scientific Reports 6, Article number: 35566 (2016)

Optical realization of the dissipative quantum oscillator

Authors: Stefano Longhi, Shane M. Eaton

Abstract: An optical realization of the damped quantum oscillator, based on transverse light dynamics in an optical resonator with slowly-moving mirrors, is theoretically suggested. The optical resonator setting provides a simple implementation of the time-dependent Caldirola-Kanai Hamiltonian of the dissipative quantum oscillator, and enables to visualize the effects of damped oscillations in the classical… ▽ More An optical realization of the damped quantum oscillator, based on transverse light dynamics in an optical resonator with slowly-moving mirrors, is theoretically suggested. The optical resonator setting provides a simple implementation of the time-dependent Caldirola-Kanai Hamiltonian of the dissipative quantum oscillator, and enables to visualize the effects of damped oscillations in the classical (ray optics) limit and wave packet collapse in the quantum (wave optics) regime. △ Less

Submitted 4 March, 2016; originally announced March 2016.

Comments: The article is dedicated to Professor Orazio Svelto on the occasion of his 80th birthday. To appear in Optics Letters

The "north pole problem" and random orthogonal matrices

Authors: Morris L. Eaton, Robb J. Muirhead

Abstract: This paper is motivated by the following observation. Take a 3 x 3 random (Haar distributed) orthogonal matrix $Γ$, and use it to "rotate" the north pole, $x_0$ say, on the unit sphere in $R^3$. This then gives a point $u=Γx_0$ that is uniformly distributed on the unit sphere. Now use the same orthogonal matrix to transform u, giving $v=Γu=Γ^2 x_0$. Simulations reported in Marzetta et al (2002)… ▽ More This paper is motivated by the following observation. Take a 3 x 3 random (Haar distributed) orthogonal matrix $Γ$, and use it to "rotate" the north pole, $x_0$ say, on the unit sphere in $R^3$. This then gives a point $u=Γx_0$ that is uniformly distributed on the unit sphere. Now use the same orthogonal matrix to transform u, giving $v=Γu=Γ^2 x_0$. Simulations reported in Marzetta et al (2002) suggest that v is more likely to be in the northern hemisphere than in the southern hemisphere, and, morever, that $w=Γ^3 x_0$ has higher probability of being closer to the poles $\pm x_0$ than the uniformly distributed point u. In this paper we prove these results, in the general setting of dimension $p\ge 3$, by deriving the exact distributions of the relevant components of u and v. The essential questions answered are the following. Let x be any fixed point on the unit sphere in $R^p$, where $p\ge 3$. What are the distributions of $U_2=x'Γ^2 x$ and $U_3=x'Γ^3 x$? It is clear by orthogonal invariance that these distribution do not depend on x, so that we can, without loss of generality, take x to be $x_0=(1,0,...,0)'\in R^p$. Call this the "north pole". Then $x_0'Γ^ k x_0$ is the first component of the vector $Γ^k x_0$. We derive stochastic representations for the exact distributions of $U_2$ and $U_3$ in terms of random variables with known distributions. △ Less

Submitted 17 November, 2008; originally announced November 2008.

A decomposition result for the Haar distribution on the orthogonal group

Authors: Morris L. Eaton, Robb J. Muirhead

Abstract: Let H be a Haar distributed random matrix on the group of pxp real orthogonal matrices. Partition H into four blocks: (1) the (1,1) element, (2)the rest of the first row, (3) the rest of the first column, and (4)the remaining (p-1)x(p-1) matrix. The marginal distribution of (1) is well known. In this paper, we give the conditional distribution of (2) and (3) given (1), and the conditional distri… ▽ More Let H be a Haar distributed random matrix on the group of pxp real orthogonal matrices. Partition H into four blocks: (1) the (1,1) element, (2)the rest of the first row, (3) the rest of the first column, and (4)the remaining (p-1)x(p-1) matrix. The marginal distribution of (1) is well known. In this paper, we give the conditional distribution of (2) and (3) given (1), and the conditional distribution of (4) given (1), (2), (3). This conditional specification uniquely determines the Haar distribution. The two conditional distributions involve well known probability distributions namely, the uniform distribution on the unit sphere in p-1 dimensional space and the Haar distribution on (p-2)x(p-2) orthogonal matrices. Our results show how to construct the Haar distribution on pxp orthogonal matrices from the Haar distribution on (p-2)x(p-2) orthogonal matrices coupled with the uniform distribution on the unit sphere in p-1 dimensions. △ Less

Submitted 16 July, 2008; originally announced July 2008.

Comments: 19 pages

Dutch book in simple multivariate normal prediction: Another look

Authors: Morris L. Eaton

Abstract: In this expository paper we describe a relatively elementary method of establishing the existence of a Dutch book in a simple multivariate normal prediction setting. The method involves deriving a nonstandard predictive distribution that is motivated by invariance. This predictive distribution satisfies an interesting identity which in turn yields an elementary demonstration of the existence of… ▽ More In this expository paper we describe a relatively elementary method of establishing the existence of a Dutch book in a simple multivariate normal prediction setting. The method involves deriving a nonstandard predictive distribution that is motivated by invariance. This predictive distribution satisfies an interesting identity which in turn yields an elementary demonstration of the existence of a Dutch book for a variety of possible predictive distributions. △ Less

Submitted 19 May, 2008; originally announced May 2008.

Comments: Published in at http://dx.doi.org/10.1214/193940307000000356 the IMS Collections (http://www.imstat.org/publications/imscollections.htm) by the Institute of Mathematical Statistics (http://www.imstat.org)

Report number: IMS-COLL2-IMSCOLL202 MSC Class: 62H99 (Primary) 62A01 (Secondary)

Journal ref: IMS Collections 2008, Vol. 2, 12-23

William H. Kruskal and the Development of Coordinate-Free Methods

Authors: Morris L. Eaton

Abstract: Discussion of ``The William Kruskal Legacy: 1919--2005'' by Stephen E. Fienberg, Stephen M. Stigler and Judith M. Tanur [arXiv:0710.5063] Discussion of ``The William Kruskal Legacy: 1919--2005'' by Stephen E. Fienberg, Stephen M. Stigler and Judith M. Tanur [arXiv:0710.5063] △ Less

Submitted 26 October, 2007; originally announced October 2007.

Comments: Published in at http://dx.doi.org/10.1214/088342306000000367 the Statistical Science (http://www.imstat.org/sts/) by the Institute of Mathematical Statistics (http://www.imstat.org)

Report number: IMS-STS-STS202B

Journal ref: Statistical Science 2007, Vol. 22, No. 2, 264-265

Evaluation of Formal posterior distributions via Markov chain arguments

Authors: Morris L. Eaton, James P. Hobert, Galin L. Jones, Wen-Lin Lai

Abstract: We consider evaluation of proper posterior distributions obtained from improper prior distributions. Our context is estimating a bounded function $φ$ of a parameter when the loss is quadratic. If the posterior mean of $φ$ is admissible for all bounded $φ$, the posterior is strongly admissible. We give sufficient conditions for strong admissibility. These conditions involve the recurrence of a Ma… ▽ More We consider evaluation of proper posterior distributions obtained from improper prior distributions. Our context is estimating a bounded function $φ$ of a parameter when the loss is quadratic. If the posterior mean of $φ$ is admissible for all bounded $φ$, the posterior is strongly admissible. We give sufficient conditions for strong admissibility. These conditions involve the recurrence of a Markov chain associated with the estimation problem. We develop general sufficient conditions for recurrence of general state space Markov chains that are also of independent interest. Our main example concerns the $p$-dimensional multivariate normal distribution with mean vector $θ$ when the prior distribution has the form $g(\|θ\|^2) dθ$ on the parameter space $\mathbb{R}^p$. Conditions on $g$ for strong admissibility of the posterior are provided. △ Less

Submitted 5 November, 2008; v1 submitted 31 January, 2007; originally announced January 2007.

Comments: Published in at http://dx.doi.org/10.1214/07-AOS542 the Annals of Statistics (http://www.imstat.org/aos/) by the Institute of Mathematical Statistics (http://www.imstat.org)

Report number: IMS-AOS-AOS542 MSC Class: 62C15 (Primary) 60J05 (Secondary)

Journal ref: Annals of Statistics 2008, Vol. 36, No. 5, 2423-2452