Showing 1–13 of 13 results for author: Dussi, S

Less can be more: Insights on the role of electrode microstructure in redox flow batteries from 2D direct numerical simulations

Authors: Simone Dussi, Chris H. Rycroft

Abstract: Understanding how to structure a porous electrode to facilitate fluid, mass, and charge transport is key to enhance the performance of electrochemical devices such as fuel cells, electrolyzers, and redox flow batteries (RFBs). Using a parallel computational framework, direct numerical simulations are carried out on idealized porous electrode microstructures for RFBs. Strategies to improve electrod… ▽ More Understanding how to structure a porous electrode to facilitate fluid, mass, and charge transport is key to enhance the performance of electrochemical devices such as fuel cells, electrolyzers, and redox flow batteries (RFBs). Using a parallel computational framework, direct numerical simulations are carried out on idealized porous electrode microstructures for RFBs. Strategies to improve electrode design starting from a regular lattice are explored. We observe that by introducing vacancies in the ordered arrangement, it is possible to achieve higher voltage efficiency at a given current density, thanks to improved mixing of reactive species, despite reducing the total reactive surface. Careful engineering of the location of vacancies, resulting in a density gradient, outperforms disordered configurations. Our simulation framework is a new tool to explore transport phenomena in RFBs and our findings suggest new ways to design performant electrodes. △ Less

Submitted 2 January, 2022; originally announced January 2022.

Comments: 12 pages, 10 figures

Sharing the load: stress redistribution governs fracture of polymer double networks

Authors: Justin Tauber, Lorenzo Rovigatti, Simone Dussi, Jasper van der Gucht

Abstract: The stress response of polymer double networks depends not only on the properties of the constituent networks, but also on the interactions arising between them. Here we demonstrate, via coarse-grained simulations, that both their global stress response and their microscopic fracture mechanics are governed by load sharing through these inter-network interactions. By comparing our results with affi… ▽ More The stress response of polymer double networks depends not only on the properties of the constituent networks, but also on the interactions arising between them. Here we demonstrate, via coarse-grained simulations, that both their global stress response and their microscopic fracture mechanics are governed by load sharing through these inter-network interactions. By comparing our results with affine predictions, where stress redistribution is by definition homogeneous, we show that stress redistribution is highly inhomogeneous. In particular, the affine prediction overestimates the fraction of broken chains by almost an order of magnitude. Furthermore, homogeneous stress distribution predicts a single fracture process, while in our simulations fracture of sacrificial chains takes place in two steps governed by load sharing within a network and between networks, respectively. Our results thus provide a detailed microscopic picture of how inhomogeneous stress redistribution after rupture of chains governs the fracture of polymer double networks. △ Less

Submitted 9 December, 2021; originally announced December 2021.

Comments: 34 pages, 8 figures, including supporting information (12 pages, 8 figures)

Journal ref: Macromolecules 54 (2021) 8563-8574

The role of temperature in the rigidity-controlled fracture of elastic networks

Authors: Justin Tauber, Aimée R. Kok, Jasper van der Gucht, Simone Dussi

Abstract: We study the influence of thermal fluctuations on the fracture of elastic networks, via simulations of the uniaxial extension of central-force spring networks with varying rigidity, i.e. connectivity. Studying their failure response, both at the macroscopic and microscopic level, we find that an increase in temperature corresponds to a more homogeneous stress (re)distribution and induces thermally… ▽ More We study the influence of thermal fluctuations on the fracture of elastic networks, via simulations of the uniaxial extension of central-force spring networks with varying rigidity, i.e. connectivity. Studying their failure response, both at the macroscopic and microscopic level, we find that an increase in temperature corresponds to a more homogeneous stress (re)distribution and induces thermally activated failure of springs. As a consequence, the material strength decreases upon increasing temperature, the damage is spread over larger lengthscales and a more ductile fracture process is observed. These effects are modulated by network rigidity and can therefore be tuned via the network connectivity and the rupture threshold of the springs. Knowledge of the interplay between temperature and rigidity improves our understanding of the fracture of elastic networks, such as (biological) polymer networks, and can help to refine design principles for tough soft materials. △ Less

Submitted 8 June, 2020; originally announced June 2020.

Comments: Main text: 14 pages, 8 figures. Supplementary information: 4 pages, 4 figures

Microscopic insights into the failure of elastic double networks

Authors: Justin Tauber, Simone Dussi, Jasper van der Gucht

Abstract: The toughness of a polymer material can increase significantly if two networks are combined into one material. This toughening effect is a consequence of a transition from a brittle to a ductile failure response. Although this transition and the accompanying toughening effect have been demonstrated in hydrogels first, the concept has been proven effective in elastomers and in macroscopic composite… ▽ More The toughness of a polymer material can increase significantly if two networks are combined into one material. This toughening effect is a consequence of a transition from a brittle to a ductile failure response. Although this transition and the accompanying toughening effect have been demonstrated in hydrogels first, the concept has been proven effective in elastomers and in macroscopic composites as well. This suggests that the transition is not caused by a specific molecular architecture, but rather by a general physical principle related to the mechanical interplay between two interpenetrating networks. Here we employ theory and computer simulations, inspired by this general principle, to investigate how disorder controls the brittle-to-ductile transition both at the macroscopic and the microscopic level. A random spring network model featuring two different spring types, enables us to study the joined effect of initial disorder and network-induced stress heterogeneity on this transition. We reveal that a mechanical force balance gives a good description of the brittle-to-ductile transition. In addition, the inclusion of disorder in the spring model predicts four different failure regimes along the brittle-to-ductile response in agreement with experimental findings. Finally, we show that the network structure can result in stress concentration, diffuse damage and loss of percolation depending on the failure regime. This work thus provides a framework for the design and optimization of double network materials and underlines the importance of network structure in the toughness of polymer materials. △ Less

Submitted 8 June, 2020; v1 submitted 20 February, 2020; originally announced February 2020.

Comments: main text: 18 pages, 9 figures. Supplemental material: 5 pages, 6 figures

Journal ref: Phys. Rev. Materials 4, 063603 (2020)

Disorder protects collagen networks from fracture

Authors: Federica Burla, Simone Dussi, Cristina Martinez-Torres, Justin Tauber, Jasper van der Gucht, Gijsje H. Koenderink

Abstract: Collagen forms the structural scaffold of connective tissues in all mammals. Tissues are remarkably resistant against mechanical deformations because collagen molecules hierarchically self-assemble in fibrous networks that stiffen with increasing strain. Nevertheless, collagen networks do fracture when tissues are overloaded or subject to pathological conditions such as aneurysms. Prior studies of… ▽ More Collagen forms the structural scaffold of connective tissues in all mammals. Tissues are remarkably resistant against mechanical deformations because collagen molecules hierarchically self-assemble in fibrous networks that stiffen with increasing strain. Nevertheless, collagen networks do fracture when tissues are overloaded or subject to pathological conditions such as aneurysms. Prior studies of the role of collagen in tissue fracture have mainly focused on tendons, which contain highly aligned bundles of collagen. By contrast, little is known about fracture of the orientationally more disordered collagen networks present in many other tissues such as skin and cartilage. Here, we combine shear rheology of reconstituted collagen networks with computer simulations to investigate the primary determinants of fracture in disordered collagen networks. We show that the fracture strain is controlled by the coordination number of the network junctions, with less connected networks fracturing at larger strains. The hierarchical structure of collagen fine-tunes the fracture strain by providing structural plasticity at the network and fiber level. Our findings imply that structural disorder provides a protective mechanism against network fracture that can optimize the strength of biological tissues. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Athermal Fracture of Elastic Networks: How Rigidity Challenges the Unavoidable Size-Induced Brittleness

Authors: Simone Dussi, Justin Tauber, Jasper van der Gucht

Abstract: By performing extensive simulations with unprecedentedly large system sizes, we unveil how rigidity influences the fracture of disordered materials. We observe the largest damage in networks with connectivity close to the isostatic point and when the rupture thresholds are small. However, regardless of network and spring properties, a more brittle fracture is observed upon increasing system size.… ▽ More By performing extensive simulations with unprecedentedly large system sizes, we unveil how rigidity influences the fracture of disordered materials. We observe the largest damage in networks with connectivity close to the isostatic point and when the rupture thresholds are small. However, regardless of network and spring properties, a more brittle fracture is observed upon increasing system size. Differently from most of the fracture descriptors, the maximum stress drop, a proxy for brittleness, displays a universal non-monotonic dependence on system size. Based on this uncommon trend it is possible to identify the characteristic system size $L^*$ at which brittleness kicks in. The more the disorder in network connectivity or in spring thresholds, the larger $L^*$. Finally, we speculate how this size-induced brittleness is influenced by thermal fluctuations. △ Less

Submitted 14 November, 2019; v1 submitted 26 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. Lett. 124, 018002 (2020)

Stress management in composite biopolymer networks

Authors: Federica Burla, Justin Tauber, Simone Dussi, Jasper van der Gucht, Gijsje H. Koenderink

Abstract: Living tissues show an extraordinary adaptiveness to strain, which is crucial for their proper biological functioning. The physical origin of this mechanical behaviour has been widely investigated using reconstituted networks of collagen fibres, the principal load-bearing component of tissues. However, collagen fibres in tissues are embedded in a soft hydrated polysaccharide matrix which generates… ▽ More Living tissues show an extraordinary adaptiveness to strain, which is crucial for their proper biological functioning. The physical origin of this mechanical behaviour has been widely investigated using reconstituted networks of collagen fibres, the principal load-bearing component of tissues. However, collagen fibres in tissues are embedded in a soft hydrated polysaccharide matrix which generates substantial internal stresses whose effect on tissue mechanics is unknown. Here, by combining mechanical measurements and computer simulations, we show that networks composed of collagen fibres and a hyaluronan matrix exhibit synergistic mechanics characterized by an enhanced stiffness and delayed strain-stiffening. We demonstrate that the polysaccharide matrix has a dual effect on the composite response involving both internal stress and elastic reinforcement. Our findings elucidate how tissues can tune their strain-sensitivity over a wide range and provide a novel design principle for synthetic materials with programmable mechanical properties. △ Less

Submitted 22 February, 2019; v1 submitted 9 October, 2018; originally announced October 2018.

Hard competition: stabilizing the elusive biaxial nematic phase in suspensions of colloidal particles with extreme lengths

Authors: Simone Dussi, Nikos Tasios, Tara Drwenski, René van Roij, Marjolein Dijkstra

Abstract: We use computer simulations to study the existence and stability of a biaxial nematic $N_b$ phase in systems of hard polyhedral cuboids, triangular prisms, and rhombic platelets, characterized by a long ($L$), medium ($M$), and short ($S$) particle axis. For all three shape families, we find stable $N_b$ states provided the shape is not only close to the so-called dual shape with $M = \sqrt{LS}$ b… ▽ More We use computer simulations to study the existence and stability of a biaxial nematic $N_b$ phase in systems of hard polyhedral cuboids, triangular prisms, and rhombic platelets, characterized by a long ($L$), medium ($M$), and short ($S$) particle axis. For all three shape families, we find stable $N_b$ states provided the shape is not only close to the so-called dual shape with $M = \sqrt{LS}$ but also sufficiently anisotropic with $L/S>9,11,14, 23$ for rhombi, prisms, and cuboids, respectively, corresponding to anisotropies not considered before. Surprisingly, a direct isotropic-$N_b$ transition does not occur in these systems due to a destabilization of $N_b$ by a smectic (for cuboids and prisms) or a columnar (for platelets) phase at small $L/S$, or by an intervening uniaxial nematic phase at large $L/S$. Our results are confirmed by a density functional theory provided the third virial coefficient is included and a continuous rather than a discrete (Zwanzig) set of particle orientations is taken into account. △ Less

Submitted 26 January, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: minor changes to the introduction, numbering of bibliography corrected

Journal ref: Phys. Rev. Lett. 120, 177801 (2018)

Connectedness percolation of hard deformed rods

Authors: Tara Drwenski, Simone Dussi, Marjolein Dijkstra, René van Roij, Paul van der Schoot

Abstract: Nanofiller particles, such as carbon nanotubes or metal wires, are used in functional polymer composites to make them conduct electricity. They are often not perfectly straight cylinders, but may be tortuous or exhibit kinks. Therefore we investigate the effect of shape deformations of the rodlike nanofillers on the geometric percolation threshold of the dispersion. We do this by using connectedne… ▽ More Nanofiller particles, such as carbon nanotubes or metal wires, are used in functional polymer composites to make them conduct electricity. They are often not perfectly straight cylinders, but may be tortuous or exhibit kinks. Therefore we investigate the effect of shape deformations of the rodlike nanofillers on the geometric percolation threshold of the dispersion. We do this by using connectedness percolation theory within a Parsons-Lee type of approximation, in combination with Monte Carlo integration for the average overlap volume in the isotropic fluid phase. We find that a deviation from a perfect rodlike shape has very little effect on the percolation threshold, unless the particles are strongly deformed. This demonstrates that idealized rod models are useful even for nanofillers that superficially seem imperfect. In addition, we show that for small or moderate rod deformations, the universal scaling of the percolation threshold is only weakly affected by the precise particle shape. △ Less

Submitted 28 November, 2017; v1 submitted 25 September, 2017; originally announced September 2017.

Comments: 7 pages, 8 figures; simplified figures and added to discussion, results unchanged

Journal ref: J. Chem. Phys. 147, 224904 (2017)

Phase diagrams of charged colloidal rods: can a uniaxial charge distribution break chiral symmetry?

Authors: Tara Drwenski, Simone Dussi, Michiel Hermes, Marjolein Dijkstra, René van Roij

Abstract: We construct phase diagrams for charged rodlike colloids within the second-virial approximation as a function of rod concentration, salt concentration, and colloidal charge. Besides the expected isotropic-nematic transition, we also find parameter regimes with a coexistence between a nematic and a second, more highly aligned nematic phase including an isotropic-nematic-nematic triple point and a n… ▽ More We construct phase diagrams for charged rodlike colloids within the second-virial approximation as a function of rod concentration, salt concentration, and colloidal charge. Besides the expected isotropic-nematic transition, we also find parameter regimes with a coexistence between a nematic and a second, more highly aligned nematic phase including an isotropic-nematic-nematic triple point and a nematic-nematic critical point, which can all be explained in terms of the twisting effect. We compute the Frank elastic constants to see if the twist elastic constant can become negative, which would indicate the possibility of a cholesteric phase spontaneously forming. Although the twisting effect reduces the twist elastic constant, we find that it always remains positive. In addition, we find that for finite aspect-ratio rods the twist elastic constant is also always positive, such that there is no evidence of chiral symmetry breaking due to a uniaxial charge distribution. △ Less

Submitted 15 February, 2016; v1 submitted 15 December, 2015; originally announced December 2015.

Comments: Added a reference to Sec. 4 and extended discussions in Secs. 4 and 7, results unchanged

Journal ref: J. Chem. Phys. 144, 094901 (2016)

Entropy-driven formation of prolate and oblate cholesteric phases by computer simulations

Authors: Simone Dussi, Marjolein Dijkstra

Abstract: Predicting the macroscopic chiral behaviour of cholesteric liquid crystals from the microscopic chirality of the particles is highly non-trivial, even when the chiral interactions are purely entropic in nature. Here we introduce a novel chiral hard-particle model, namely particles with a twisted polyhedral shape and obtain, for the first time, a stable fully-entropy-driven cholesteric phase by com… ▽ More Predicting the macroscopic chiral behaviour of cholesteric liquid crystals from the microscopic chirality of the particles is highly non-trivial, even when the chiral interactions are purely entropic in nature. Here we introduce a novel chiral hard-particle model, namely particles with a twisted polyhedral shape and obtain, for the first time, a stable fully-entropy-driven cholesteric phase by computer simulations. By slightly modifying the triangular base of the particle, we are able to switch from a left-handed prolate to a right-handed oblate cholesteric using the same right-handed twisted particle model. Furthermore, we find qualitative agreement with an Onsager-like theory, suggesting that the latter can be used as a quick tool to scan the huge parameter space associated to the microscopic chirality. Our results unveil how the competition between particle biaxiality and chirality is reflected into the nematic self-organization and new theoretical challenges on the self-assembly of chiral particles can be undertaken. △ Less

Submitted 30 November, 2015; originally announced November 2015.

Cholesterics of colloidal helices: Predicting the macroscopic pitch from the particle shape and thermodynamic state

Authors: Simone Dussi, Simone Belli, René van Roij, Marjolein Dijkstra

Abstract: Building a general theoretical framework to describe the microscopic origin of macroscopic chirality in (colloidal) liquid crystals is a long-standing challenge. Here, we combine classical density functional theory with Monte Carlo calculations of virial-type coefficients, to obtain the equilibrium cholesteric pitch as a function of thermodynamic state and microscopic details. Applying the theory… ▽ More Building a general theoretical framework to describe the microscopic origin of macroscopic chirality in (colloidal) liquid crystals is a long-standing challenge. Here, we combine classical density functional theory with Monte Carlo calculations of virial-type coefficients, to obtain the equilibrium cholesteric pitch as a function of thermodynamic state and microscopic details. Applying the theory to hard helices, we observe both right- and left-handed cholesteric phases that depend on a subtle combination of particle geometry and system density. In particular, we find that entropy alone can even lead to a (double) inversion in the cholesteric sense of twist upon changing the packing fraction. We show how the competition between single-particle properties (shape) and thermodynamics (local alignment) dictates the macroscopic chiral behavior. Moreover, by expanding our free-energy functional we are able to assess, quantitatively, Straley's theory of weak chirality, used in several earlier studies. Furthermore, by extending our theory to different lyotropic and thermotropic liquid-crystal models, we analyze the effect of an additional soft interaction on the chiral behavior of the helices. Finally, we provide some guidelines for the description of more complex chiral phases, like twist-bend nematics. Our results provide new insights on the role of entropy in the microscopic origin of this state of matter. △ Less

Submitted 3 December, 2014; originally announced December 2014.

Journal ref: J. Chem. Phys. 142, 074905 (2015)

Density Functional Theory for Chiral Nematic Liquid Crystals

Authors: S. Belli, S. Dussi, M. Dijkstra, R. van Roij

Abstract: Even though chiral nematic phases were the first liquid crystals experimentally observed more than a century ago, the origin of the thermodynamic stability of cholesteric states is still unclear. In this Letter we address the problem by means of a novel density functional theory for the equilibrium pitch of chiral particles. When applied to right-handed hard helices, our theory predicts an entropy… ▽ More Even though chiral nematic phases were the first liquid crystals experimentally observed more than a century ago, the origin of the thermodynamic stability of cholesteric states is still unclear. In this Letter we address the problem by means of a novel density functional theory for the equilibrium pitch of chiral particles. When applied to right-handed hard helices, our theory predicts an entropy-driven cholesteric phase, which can be either right- or left-handed, depending not only on the particle shape but also on the thermodynamic state. We explain the origin of the chiral ordering as an interplay between local nematic alignment and excluded-volume differences between left- and right-handed particle pairs. △ Less

Submitted 8 April, 2014; originally announced April 2014.

Journal ref: Phys. Rev. E 90, 020503 (2014)