-
Experimental Investigation of a Bipartite Quench in a 1D Bose gas
Authors:
Léa Dubois,
Guillaume Thémèze,
Jérôme Dubail,
Isabelle Bouchoule
Abstract:
Long wavelength dynamics of 1D Bose gases with repulsive contact interactions can be captured by Generalized HydroDynamics (GHD) which predicts the evolution of the local rapidity distribution. The latter corresponds to the momentum distribution of quasiparticles, which have infinite lifetime owing to the integrability of the system. Here we experimentally investigate the dynamics for an initial s…
▽ More
Long wavelength dynamics of 1D Bose gases with repulsive contact interactions can be captured by Generalized HydroDynamics (GHD) which predicts the evolution of the local rapidity distribution. The latter corresponds to the momentum distribution of quasiparticles, which have infinite lifetime owing to the integrability of the system. Here we experimentally investigate the dynamics for an initial situation that is the junction of two semi-infinite systems in different stationary states, a protocol referred to as "bipartite quench" protocol. More precisely we realise the particular case where one half of the system is the vacuum state. We show that the evolution of the boundary density profile exhibits ballistic dynamics obeying the Euler hydrodynamic scaling. The boundary profiles are similar to the ones predicted with zero-temperature GHD in the quasi-BEC regime, with deviations due to non-zero entropy effects. We show that this protocol, provided the boundary profile is measured with infinite precision, permits to reconstruct the rapidity distribution of the initial state. For our data, we extract the initial rapidity distribution by fitting the boundary profile and we use a 3-parameter ansatz that goes beyond the thermal assumption. Finally, we investigate the local rapidity distribution inside the boundary profile, which, according to GHD, presents, on one side, features of zero-entropy states. The measured distribution shows the asymmetry predicted by GHD, although unelucidated deviations remain.
△ Less
Submitted 9 May, 2025;
originally announced May 2025.
-
Simulating nonlinear optical processes on a superconducting quantum device
Authors:
Yuan Shi,
Bram Evert,
Amy F. Brown,
Vinay Tripathi,
Eyob A. Sete,
Vasily Geyko,
Yujin Cho,
Jonathan L DuBois,
Daniel Lidar,
Ilon Joseph,
Matt Reagor
Abstract:
Simulating plasma physics on quantum computers is difficult because most problems of interest are nonlinear, but quantum computers are not naturally suitable for nonlinear operations. In weakly nonlinear regimes, plasma problems can be modeled as wave-wave interactions. In this paper, we develop a quantization approach to convert nonlinear wave-wave interaction problems to Hamiltonian simulation p…
▽ More
Simulating plasma physics on quantum computers is difficult because most problems of interest are nonlinear, but quantum computers are not naturally suitable for nonlinear operations. In weakly nonlinear regimes, plasma problems can be modeled as wave-wave interactions. In this paper, we develop a quantization approach to convert nonlinear wave-wave interaction problems to Hamiltonian simulation problems. We demonstrate our approach using two qubits on a superconducting device. Unlike a photonic device, a superconducting device does not naturally have the desired interactions in its native Hamiltonian. Nevertheless, Hamiltonian simulations can still be performed by decomposing required unitary operations into native gates. To improve experimental results, we employ a range of error mitigation techniques. Apart from readout error mitigation, we use randomized compilation to transform undiagnosed coherent errors into well-behaved stochastic Pauli channels. Moreover, to compensate for stochastic noise, we rescale exponentially decaying probability amplitudes using rates measured from cycle benchmarking. We carefully consider how different choices of product-formula algorithms affect the overall error and show how a trade-off can be made to best utilize limited quantum resources. This study provides an example of how plasma problems may be solved on near-term quantum computing platforms.
△ Less
Submitted 26 August, 2024; v1 submitted 18 June, 2024;
originally announced June 2024.
-
Growth and Structure of alpha-Ta films for Quantum Circuit Integration
Authors:
Loren D. Alegria,
Alex Abelson,
Eunjeong Kim,
Soohyun Im,
Paul M. Voyles,
Vincenzo Lordi,
Jonathan L Dubois,
Yaniv J. Rosen
Abstract:
Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. Remaining loss pathways originate in microscopic defects which manifest as two level systems (TLS) at low temperature. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we inv…
▽ More
Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. Remaining loss pathways originate in microscopic defects which manifest as two level systems (TLS) at low temperature. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for growth of fully-oriented films with alpha-Ta [1 1 1] // Al2O3 [0 0 0 1] and alpha-Ta [1 -1 0] // Al2O3 [1 0 -1 0] orientational relationships, and having residual resistivity ratios (RRR) ~ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ~ 30. We further demonstrate airbridge fabrication using Nb to nucleate alpha-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 +/- 0.3 x 10^6 at 10 mK (for waveguide gap and conductor widths of 3 microns and 6 microns, respectively). Structural characterization using scanning electron microscopy, X-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights for fabrication of advanced superconducting devices including qubit arrays, and guide future work on crystallographically deterministic qubit fabrication.
△ Less
Submitted 9 January, 2025; v1 submitted 12 May, 2024;
originally announced May 2024.
-
Making Multicurves Cross Minimally on Surfaces
Authors:
Loïc Dubois
Abstract:
On an orientable surface $S$, consider a collection $Γ$ of closed curves. The (geometric) intersection number $i_S(Γ)$ is the minimum number of self-intersections that a collection $Γ'$ can have, where $Γ'$ results from a continuous deformation (homotopy) of $Γ$. We provide algorithms that compute $i_S(Γ)$ and such a $Γ'$, assuming that $Γ$ is given by a collection of closed walks of length $n$ in…
▽ More
On an orientable surface $S$, consider a collection $Γ$ of closed curves. The (geometric) intersection number $i_S(Γ)$ is the minimum number of self-intersections that a collection $Γ'$ can have, where $Γ'$ results from a continuous deformation (homotopy) of $Γ$. We provide algorithms that compute $i_S(Γ)$ and such a $Γ'$, assuming that $Γ$ is given by a collection of closed walks of length $n$ in a graph $M$ cellularly embedded on $S$, in $O(n \log n)$ time when $M$ and $S$ are fixed.
The state of the art is a paper of Despré and Lazarus [SoCG 2017, J. ACM 2019], who compute $i_S(Γ)$ in $O(n^2)$ time, and $Γ'$ in $O(n^4)$ time if $Γ$ is a single closed curve. Our result is more general since we can put an arbitrary number of closed curves in minimal position. Also, our algorithms are quasi-linear in $n$ instead of quadratic and quartic, and our proofs are simpler and shorter.
We use techniques from two-dimensional topology and from the theory of hyperbolic surfaces. Most notably, we prove a new property of the reducing triangulations introduced by Colin de Verdière, Despré, and Dubois [SODA 2024], reducing our problem to the case of surfaces with boundary. As a key subroutine, we rely on an algorithm of Fulek and Tóth [JCO 2020].
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Probing the local rapidity distribution of a 1D Bose gas
Authors:
L. Dubois,
G. Thémèze,
F. Nogrette,
J. Dubail,
I. Bouchoule
Abstract:
One-dimensional Bose gases with contact repulsive interactions are characterized by the presence of infinite-lifetime quasiparticles whose momenta are called the `rapidities'. Here we develop a probe of the local rapidity distribution, based on the fact that rapidities are the asymptotic momenta of the particles after a long one-dimensional expansion. This is done by performing an expansion of a s…
▽ More
One-dimensional Bose gases with contact repulsive interactions are characterized by the presence of infinite-lifetime quasiparticles whose momenta are called the `rapidities'. Here we develop a probe of the local rapidity distribution, based on the fact that rapidities are the asymptotic momenta of the particles after a long one-dimensional expansion. This is done by performing an expansion of a selected slice of the gas. We first apply this idea to a cloud in the quasi-condensate regime at equilibrium in a trap. We obtain an experimental picture of the position-dependent rapidity distribution which is in fair agreement with the theory prediction. The asymptotic regime is barely reached, but we show that finite expansion time can be taken into account using the Generalized Hydrodynamics theory. We then apply this local probe to an out-of-equilibrium situation where the local rapidity distribution is expected to be doubly peaked -- a hallmark of a non-thermal state -- even though the global rapidity distribution would possess no such distinctive feature. We observe the doubly-peaked local rapidity distribution.
△ Less
Submitted 5 June, 2024; v1 submitted 23 December, 2023;
originally announced December 2023.
-
Untangling Graphs on Surfaces
Authors:
Éric Colin de Verdière,
Vincent Despré,
Loïc Dubois
Abstract:
Consider a graph drawn on a surface (for example, the plane minus a finite set of obstacle points), possibly with crossings. We provide an algorithm to decide whether such a drawing can be untangled, namely, if one can slide the vertices and edges of the graph on the surface (avoiding the obstacles) to remove all crossings; in other words, whether the drawing is homotopic to an embedding. While th…
▽ More
Consider a graph drawn on a surface (for example, the plane minus a finite set of obstacle points), possibly with crossings. We provide an algorithm to decide whether such a drawing can be untangled, namely, if one can slide the vertices and edges of the graph on the surface (avoiding the obstacles) to remove all crossings; in other words, whether the drawing is homotopic to an embedding. While the problem boils down to planarity testing when the surface is the sphere or the disk (or equivalently the plane without any obstacle), the other cases have never been studied before, except when the input graph is a cycle, in an abundant literature in topology and more recently by Despré and Lazarus [SoCG 2017, J. ACM 2019].
Our algorithm runs in O(m + poly(g+b) n log n) time, where g >= 0 and b >= 0 are the genus and the number of boundary components of the input orientable surface S, and n is the size of the input graph drawing, lying on some fixed graph of size m cellularly embedded on S.
We use various techniques from two-dimensional computational topology and from the theory of hyperbolic surfaces. Most notably, we introduce reducing triangulations, a novel discrete analog of hyperbolic surfaces in the spirit of systems of quads by Lazarus and Rivaud [FOCS 2012] and Erickson and Whittlesey [SODA 2013], which have the additional benefit that reduced paths are unique and stable upon reversal; they are likely of independent interest. Tailored data structures are needed to achieve certain homotopy tests efficiently on these triangulations. As a key subroutine, we rely on an algorithm to test the weak simplicity of a graph drawn on a surface by Akitaya, Fulek, and Tóth [SODA 2018, TALG 2019].
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Stochastic modeling of superconducting qudits in the dispersive regime
Authors:
Kangdi Yu,
Murat C. Sarihan,
Jin Ho Kang,
Madeline Taylor,
Cody S. Fan,
Ananyo Banerjee,
Jonathan L. DuBois,
Yaniv J. Rosen,
Chee Wei Wong
Abstract:
The field of superconducting quantum computing, based on Josephson junctions, has recently seen remarkable strides in scaling the number of logical qubits. In particular, the fidelities of one- and two-qubit gates have reached the breakeven point with the novel error mitigation and correction methods. Parallel to these advances is the effort to expand the Hilbert space within a single junction or…
▽ More
The field of superconducting quantum computing, based on Josephson junctions, has recently seen remarkable strides in scaling the number of logical qubits. In particular, the fidelities of one- and two-qubit gates have reached the breakeven point with the novel error mitigation and correction methods. Parallel to these advances is the effort to expand the Hilbert space within a single junction or device by employing high-dimensional qubits, otherwise known as qudits. Research has demonstrated the possibility of driving higher-order transitions in a transmon or designing innovative multimode superconducting circuits, termed multimons. These advances can significantly expand the computational basis while simplifying the interconnects in a large-scale quantum processor. In this work we extend the measurement theory of a conventional superconducting qubit to that of a qudit, focusing on modeling the dispersive quadrature measurement in an open quantum system. Under the Markov assumption, the qudit Lindblad and stochastic master equations are formulated and analyzed; in addition, both the ensemble-averaged and the quantum-jump approach of decoherence analysis are detailed with analytical and numerical comparisons. We verify our stochastic model with a series of experimental results on a transmon-type qutrit, verifying the validity of our high-dimensional formalism.
△ Less
Submitted 5 July, 2024; v1 submitted 28 October, 2023;
originally announced October 2023.
-
Edge Magnetoplasmon Dispersion and Time-Resolved Plasmon Transport in a Quantum Anomalous Hall Insulator
Authors:
Luis A. Martinez,
Gang Qiu,
Peng Deng,
Peng Zhang,
Keith G. Ray,
Lixuan Tai,
Ming-Tso Wei,
Haoran He,
Kang L. Wang,
Jonathan L DuBois,
Dong-Xia Qu
Abstract:
A quantum anomalous Hall (QAH) insulator breaks reciprocity by combining magnetic polarization and spin-orbit coupling to generate a unidirectional transmission of signals in the absence of an external magnetic field. Such behavior makes QAH materials a good platform for the innovation of circulator technologies. However, it remains elusive as to how the wavelength of the chiral edge plasmon relat…
▽ More
A quantum anomalous Hall (QAH) insulator breaks reciprocity by combining magnetic polarization and spin-orbit coupling to generate a unidirectional transmission of signals in the absence of an external magnetic field. Such behavior makes QAH materials a good platform for the innovation of circulator technologies. However, it remains elusive as to how the wavelength of the chiral edge plasmon relates to its frequency and how the plasmon wave packet is excited in the time domain in a QAH insulator. Here, we investigate the edge magnetoplasmon (EMP) resonances in Cr-(Bi,Sb)$_2$Te$_3$ by frequency and time domain measurements. From disk shaped samples with various dimensions, we obtain the dispersion relation of EMPs and extract the drift velocity of the chiral edge state. From the time-resolved transport measurements, we identify the velocity of the plasmon wave packet and observe a transition from the edge to bulk transport at an elevated temperature. We show that the frequency and time domain measurements are well modeled by loss from the microwave induced dissipative channels in the bulk area. Our results demonstrate that the EMP decay rate can be significantly reduced by applying a low microwave power and fabricating devices of larger diameter $\ge100~μ$m. In a $R=125~μ$m sample, a non-reciprocity of 20 dB has been realized at 1.3 GHz, shining light on using QAH insulators to develop on-chip non-reciprocal devices.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Direct pulse-level compilation of arbitrary quantum logic gates on superconducting qutrits
Authors:
Yujin Cho,
Kristin M. Beck,
Alessandro R. Castelli,
Kyle A. Wendt,
Bram Evert,
Matthew J. Reagor,
Jonathan L DuBois
Abstract:
Advanced simulations and calculations on quantum computers require high-fidelity implementations of quantum operations. The universal gateset approach builds complex unitaries from a small set of primitive gates, often resulting in a long gate sequence which is typically a leading factor in the total accumulated error. Compiling a complex unitary for processors with higher-dimensional logical elem…
▽ More
Advanced simulations and calculations on quantum computers require high-fidelity implementations of quantum operations. The universal gateset approach builds complex unitaries from a small set of primitive gates, often resulting in a long gate sequence which is typically a leading factor in the total accumulated error. Compiling a complex unitary for processors with higher-dimensional logical elements, such as qutrits, exacerbates the accumulated error per unitary, since an even longer gate sequence is required. Optimal control methods promise time and resource efficient compact gate sequences and, therefore, higher fidelity. These methods generate pulses that can directly implement any complex unitary on a quantum device. In this work, we demonstrate any arbitrary qubit and qutrit gate can be realized with high-fidelity, which can significantly reduce the length of a gate sequence. We generate and test pulses for a large set of randomly selected arbitrary unitaries on several quantum processing units (QPUs): the LLNL Quantum Device and Integration Testbed (QuDIT) standard QPU and three of Rigetti QPUs: Ankaa-2, Ankaa-9Q-1, and Aspen-M-3. On the QuDIT platform's standard QPU, the average fidelity of random qutrit gates is 97.9+-0.5% measured with conventional QPT and 98.8+-0.6% from QPT with gate folding. Rigetti's Ankaa-2 achieves random qubit gates with an average fidelity of 98.4+-0.5% (conventional QPT) and 99.7+-0.1% (QPT with gate folding). On Ankaa-9Q-1 and Aspen-M-3, the average fidelities with conventional qubit QPT measurements were higher than 99%. We show that optimal control gates are robust to drift for at least three hours and that the same calibration parameters can be used for all implemented gates. Our work promises the calibration overheads for optimal control gates can be made small enough to enable efficient quantum circuits based on this technique.
△ Less
Submitted 28 June, 2024; v1 submitted 7 March, 2023;
originally announced March 2023.
-
A quantum-classical co-processing protocol towards simulating nuclear reactions on contemporary quantum hardware
Authors:
Francesco Turro,
Trevor Chistolini,
Akel Hashim,
Yosep Kim,
William Livingston,
Kyle. A. Wendt,
Jonathan L Dubois,
Francesco Pederiva,
Sofia Quaglioni,
David I. Santiago,
Irfan Siddiqi
Abstract:
Quantum computers hold great promise for arriving at exact simulations of nuclear dynamical processes (e.g., scattering and reactions) that are paramount to the study of nuclear matter at the limit of stability and to explaining the formation of chemical elements in stars. However, quantum simulations of the unitary (real) time dynamics of fermionic many-body systems require a currently prohibitiv…
▽ More
Quantum computers hold great promise for arriving at exact simulations of nuclear dynamical processes (e.g., scattering and reactions) that are paramount to the study of nuclear matter at the limit of stability and to explaining the formation of chemical elements in stars. However, quantum simulations of the unitary (real) time dynamics of fermionic many-body systems require a currently prohibitive number of reliable and long-lived qubits. We propose a co-processing algorithm for the simulation of real-time dynamics in which the time evolution of the spatial coordinates is carried out on a classical processor, while the evolution of the spin degrees of freedom is carried out on a quantum processor. This hybrid algorithm is demonstrated by a quantum simulation of the scattering of two neutrons performed at the Lawrence Berkeley National Laboratory's Advanced Quantum Testbed. We show that, after implementation of error mitigation strategies to improve the accuracy of the algorithm in addition to the use of either circuit compression techniques or tomography as methods to elucidate the onset of decoherence, this initial demonstration validates the principle of the proposed co-processing scheme. We anticipate that a generalization of this present scheme will open the way for (real-time) path integral simulations of nuclear scattering.
△ Less
Submitted 26 September, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Rapidity distribution within the defocusing non-linear Schrödinger equation model
Authors:
Yasser Bezzaz,
Léa Dubois,
Isabelle Bouchoule
Abstract:
We consider the classical field integrable system whose evolution equation is the nonlinear Schrödinger equation with defocusing non-linearities, which is the classical limit of the quantum Lieb-Liniger model. We propose a simple derivation of the relation between two sets of conserved quantities: on the one hand the trace of the monodromy matrix, parameterized by the spectral parameter and introd…
▽ More
We consider the classical field integrable system whose evolution equation is the nonlinear Schrödinger equation with defocusing non-linearities, which is the classical limit of the quantum Lieb-Liniger model. We propose a simple derivation of the relation between two sets of conserved quantities: on the one hand the trace of the monodromy matrix, parameterized by the spectral parameter and introduced in the inverse-scattering framework, and on the other hand the rapidity distribution, a concept imported from the Lieb-Liniger model. To do so we use the definition of the rapidity distribution as the asymptotic momentum distribution after an expansion. More precisely we use thought experiments implementing an expansion and we present two different ways to derive our result, based on different thought experiments which lead to different calculations.
△ Less
Submitted 1 May, 2023; v1 submitted 26 January, 2023;
originally announced January 2023.
-
Two-Level Systems in Nucleated and Non-Nucleated Epitaxial alpha-Tantalum films
Authors:
L. D. Alegria,
D. M. Tennant,
K. R. Chaves,
J. R. I. Lee,
S. R. O'Kelley,
Y. J. Rosen,
J L DuBois
Abstract:
Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. But, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, alpha-Ta, during thin film deposition. It has long been known…
▽ More
Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. But, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, alpha-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of alpha-Ta, although neither an epitaxial process nor few-photon microwave loss measurements have been reported for Nb-nucleated Ta films prior to this study. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of crystalline order on quantum coherence. In both cases, films grew with Al2O3 (001) || Ta (110) indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss, as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 +/- 0.1 x 10^-5) than non-nucleated (5 +/- 1 x 10^-6) in approximate proportion to defect densities as characterized by X-ray diffraction (0.27 ° vs 0.18 ° [110] reflection width) and electron microscopy (30 nm vs 70 nm domain size). The dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature alpha-Ta epitaxy may enable the growth of new, microstate-free heterostructures which would not withstand high temperature processing.
△ Less
Submitted 18 September, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Single Flux Quantum-Based Digital Control of Superconducting Qubits in a Multi-Chip Module
Authors:
Chuan-Hong Liu,
Andrew Ballard,
David Olaya,
Daniel R. Schmidt,
John Biesecker,
Tammy Lucas,
Joel Ullom,
Shravan Patel,
Owen Rafferty,
Alexander Opremcak,
Kenneth Dodge,
Vito Iaia,
Tianna McBroom,
Jonathan L. Dubois,
Pete F. Hopkins,
Samuel P. Benz,
Britton L. T. Plourde,
Robert McDermott
Abstract:
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated…
▽ More
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated QP poisoning. Here, the SFQ elements and qubits are fabricated on separate chips that are joined with In bump bonds. We use interleaved randomized benchmarking to characterize the fidelity of SFQ-based gates, and we demonstrate an error per Clifford gate of 1.2(1)%, an order-of-magnitude reduction over the gate error achieved in the initial realization of SFQ-based qubit control. We use purity benchmarking to quantify the contribution of incoherent error at 0.96(2)%; we attribute this error to photon-mediated QP poisoning mediated by the resonant mm-wave antenna modes of the qubit and SFQ-qubit coupler. We anticipate that a straightforward redesign of the SFQ driver circuit to limit the bandwidth of the SFQ pulses will eliminate this source of infidelity, allowing SFQ-based gates with fidelity approaching theoretical limits, namely 99.9% for resonant sequences and 99.99% for more complex pulse sequences involving variable pulse-to-pulse separation.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Phase-Slip Lines and Anomalous Josephson Effects in a Tungsten Clusters-Topological Insulator Microbridge
Authors:
Dong-Xia Qu,
Joseph J. Cuozzo,
Nick E. Teslich,
Keith G. Ray,
Zurong Dai,
Tian T. Li,
George F. Chapline,
Jonathan L. DuBois,
Enrico Rossi
Abstract:
Superconducting topological systems formed by a strong 3D topological insulator (TI) in proximity to a conventional $s$-wave superconductor (SC) have been intensely studied as they may host Majorana zero modes. However, there are limited experimental realizations of TI-SC systems in which robust superconducting pairing is induced on the surface states of the TI and a topological superconducting st…
▽ More
Superconducting topological systems formed by a strong 3D topological insulator (TI) in proximity to a conventional $s$-wave superconductor (SC) have been intensely studied as they may host Majorana zero modes. However, there are limited experimental realizations of TI-SC systems in which robust superconducting pairing is induced on the surface states of the TI and a topological superconducting state is established. Here, we fabricate a novel TI-SC system by depositing, via focused ion beam, tungsten (W) nanoscale clusters on the surface of TI Bi$_{0.91}$Sb$_{0.09}$. We find that the resulting heterostructure supports phase-slip lines that act as effective Josephson junctions. We probe the response of the system to microwave radiation. We find that for some ac frequencies, and powers, the resulting Shapiro steps' structure of the voltage-current characteristic exhibits a missing first step and an unexpectedly wide second Shapiro step. The theoretical analysis of the measurements shows that the unusual Shapiro response arises from the interplay between a static Josephson junction and a dynamic one, and allows us to identify the conditions under which the missing first step can be attributed to the topological nature of the Josephson junctions formed by the phase-slip lines. Our results suggest a new approach to induce superconductivity in a TI, a novel route to realizing highly-transparent topological Josephson junctions, and show how the response of superconducting systems to microwave radiation can be used to infer the dynamics of phase-slip lines.
△ Less
Submitted 30 December, 2022;
originally announced January 2023.
-
Quantum Computing for Fusion Energy Science Applications
Authors:
I. Joseph,
Y. Shi,
M. D. Porter,
A. R. Castelli,
V. I. Geyko,
F. R. Graziani,
S. B. Libby,
J. L. DuBois
Abstract:
This is a review of recent research exploring and extending present-day quantum computing capabilities for fusion energy science applications. We begin with a brief tutorial on both ideal and open quantum dynamics, universal quantum computation, and quantum algorithms. Then, we explore the topic of using quantum computers to simulate both linear and nonlinear dynamics in greater detail. Because qu…
▽ More
This is a review of recent research exploring and extending present-day quantum computing capabilities for fusion energy science applications. We begin with a brief tutorial on both ideal and open quantum dynamics, universal quantum computation, and quantum algorithms. Then, we explore the topic of using quantum computers to simulate both linear and nonlinear dynamics in greater detail. Because quantum computers can only efficiently perform linear operations on the quantum state, it is challenging to perform nonlinear operations that are generically required to describe the nonlinear differential equations of interest. In this work, we extend previous results on embedding nonlinear systems within linear systems by explicitly deriving the connection between the Koopman evolution operator, the Perron-Frobenius evolution operator, and the Koopman-von Neumann evolution (KvN) operator. We also explicitly derive the connection between the Koopman and Carleman approaches to embedding. Extension of the KvN framework to the complex-analytic setting relevant to Carleman embedding, and the proof that different choices of complex analytic reproducing kernel Hilbert spaces depend on the choice of Hilbert space metric are covered in the appendices. Finally, we conclude with a review of recent quantum hardware implementations of algorithms on present-day quantum hardware platforms that may one day be accelerated through Hamiltonian simulation. We discuss the simulation of toy models of wave-particle interactions through the simulation of quantum maps and of wave-wave interactions important in nonlinear plasma dynamics.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Enhancing Qubit Readout with Autoencoders
Authors:
Piero Luchi,
Paolo E. Trevisanutto,
Alessandro Roggero,
Jonathan L. DuBois,
Yaniv J. Rosen,
Francesco Turro,
Valentina Amitrano,
Francesco Pederiva
Abstract:
In addition to the need for stable and precisely controllable qubits, quantum computers take advantage of good readout schemes. Superconducting qubit states can be inferred from the readout signal transmitted through a dispersively coupled resonator. This work proposes a novel readout classification method for superconducting qubits based on a neural network pre-trained with an autoencoder approac…
▽ More
In addition to the need for stable and precisely controllable qubits, quantum computers take advantage of good readout schemes. Superconducting qubit states can be inferred from the readout signal transmitted through a dispersively coupled resonator. This work proposes a novel readout classification method for superconducting qubits based on a neural network pre-trained with an autoencoder approach. A neural network is pre-trained with qubit readout signals as autoencoders in order to extract relevant features from the data set. Afterwards, the pre-trained network inner layer values are used to perform a classification of the inputs in a supervised manner. We demonstrate that this method can enhance classification performance, particularly for short and long time measurements where more traditional methods present lower performance.
△ Less
Submitted 6 September, 2023; v1 submitted 30 November, 2022;
originally announced December 2022.
-
Simulating noise on a quantum processor: interactions between a qubit and resonant two-level system bath
Authors:
Yujin Cho,
Dipti Jasrasaria,
Keith G. Ray,
Daniel M. Tennant,
Vincenzo Lordi,
Jonathan L DuBois,
Yaniv J. Rosen
Abstract:
Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantu…
▽ More
Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantum system dynamics, and draws from the current understanding of two-level system (TLS) theory. Specifically, we start with one million TLSs distributed on the surface of a qubit and pick the 200 systems that are most strongly coupled to the qubit. We then perform a full Lindbladian simulation that explicitly includes the coherent coupling between the qubit and the TLS bath to model the time dependent density matrix of resonant TLS defects and the qubit. We find that the 200 most strongly coupled TLSs can accurately describe the qubit energy relaxation time. This work confirms that resonant TLSs located in areas where the electric field is strong can significantly affect the qubit relaxation time, even if they are located far from the Josephson junction. Similarly, a strongly-coupled resonant TLS located in the Josephson junction does not guarantee a reduced qubit relaxation time if a more strongly coupled TLS is far from the Josephson junction. In addition to the coupling strengths between TLSs and the qubit, the model predicts that the geometry of the device and the TLS relaxation time play a significant role in qubit dynamics. Our work can provide guidance for future quantum processor designs with improved qubit coherence times.
△ Less
Submitted 7 June, 2023; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Noise-specific beats in the higher-level Ramsey curves of a transmon qubit
Authors:
L. A. Martinez,
Z. Peng,
D. Appelö,
D. M. Tennant,
N. Anders Petersson,
J. L DuBois,
Y. J. Rosen
Abstract:
In the higher levels of superconducting transmon devices, and more generally charge sensitive devices, $T_2^*$ measurements made in the presence of low-frequency time-correlated $1/f$ charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves,…
▽ More
In the higher levels of superconducting transmon devices, and more generally charge sensitive devices, $T_2^*$ measurements made in the presence of low-frequency time-correlated $1/f$ charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves, and are reproduced with a phenomenological Ramsey curve model which accounts for the charge variations. $T_2^*$ dephasing times which more accurately represent the total dephasing time are obtained. The phenomenological model is compared with a Lindblad master equation model. Both models are found to be in agreement with one another and the experimental data. Finally, the phenomenological formulation enables a simple method in which the power spectral density (PSD) for the low-frequency noise can be inferred from the overlay of several Ramsey curves.
△ Less
Submitted 11 November, 2022;
originally announced November 2022.
-
Relaxation of phonons in the Lieb-Liniger gas by dynamical refermionization
Authors:
Isabelle Bouchoule,
Jérôme Dubail,
Léa Dubois,
Dimitri M. Gangardt
Abstract:
We investigate the Lieb-Liniger gas initially prepared in an out-of-equilibrium state that is Gaussian in terms of the phonons. Because the phonons are not exact eigenstates of the Hamiltonian, the gas relaxes to a stationary state at very long times. Thanks to integrability, that stationary state needs not be a thermal state. We characterize the stationary state of the gas after relaxation and co…
▽ More
We investigate the Lieb-Liniger gas initially prepared in an out-of-equilibrium state that is Gaussian in terms of the phonons. Because the phonons are not exact eigenstates of the Hamiltonian, the gas relaxes to a stationary state at very long times. Thanks to integrability, that stationary state needs not be a thermal state. We characterize the stationary state of the gas after relaxation and compute its phonon population distribution. Technically, this follows from the mapping between the exact eigenstates of the Lieb-Liniger Hamiltonian and those of a non-interacting Fermi gas -- a mapping provided by the Bethe equations -- , as well as on bosonization formulas valid in the low-energy sector of the Hilbert space. We apply our results to the case where the initial state is an excited coherent state for a single phonon mode, and we compare them to exact results obtained in the hard-core limit.
△ Less
Submitted 5 April, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Model predictive control for robust quantum state preparation
Authors:
Andy J. Goldschmidt,
Jonathan L. DuBois,
Steven L. Brunton,
J. Nathan Kutz
Abstract:
A critical engineering challenge in quantum technology is the accurate control of quantum dynamics. Model-based methods for optimal control have been shown to be highly effective when theory and experiment closely match. Consequently, realizing high-fidelity quantum processes with model-based control requires careful device characterization. In quantum processors based on cold atoms, the Hamiltoni…
▽ More
A critical engineering challenge in quantum technology is the accurate control of quantum dynamics. Model-based methods for optimal control have been shown to be highly effective when theory and experiment closely match. Consequently, realizing high-fidelity quantum processes with model-based control requires careful device characterization. In quantum processors based on cold atoms, the Hamiltonian can be well-characterized. For superconducting qubits operating at milli-Kelvin temperatures, the Hamiltonian is not as well-characterized. Unaccounted for physics (i.e., mode discrepancy), coherent disturbances, and increased noise compromise traditional model-based control. This work introduces model predictive control (MPC) for quantum control applications. MPC is a closed-loop optimization framework that (i) inherits a natural degree of disturbance rejection by incorporating measurement feedback, (ii) utilizes finite-horizon model-based optimizations to control complex multi-input, multi-output dynamical systems under state and input constraints, and (iii) is flexible enough to develop synergistically alongside other modern control strategies. We show how MPC can be used to generate practical optimized control sequences in representative examples of quantum state preparation. Specifically, we demonstrate for a qubit, a weakly-anharmonic qubit, and a system undergoing crosstalk, that MPC can realize successful model-based control even when the model is inadequate. These examples showcase why MPC is an important addition to the quantum engineering control suite.
△ Less
Submitted 11 October, 2022; v1 submitted 13 January, 2022;
originally announced January 2022.
-
Quandary: An open-source C++ package for high-performance optimal control of open quantum systems
Authors:
Stefanie Günther,
N. Anders Petersson,
Jonathan L. Dubois
Abstract:
Quantum optimal control can be used to shape the control pulses for realizing unitary and non-unitary transformations of quantum states. These control pulses provide the fundamental interface between the quantum compiler and the quantum hardware. Most current software for quantum optimal control (e.g. Qutip or Krotov) is restricted to run on shared memory platforms, limiting their applicability to…
▽ More
Quantum optimal control can be used to shape the control pulses for realizing unitary and non-unitary transformations of quantum states. These control pulses provide the fundamental interface between the quantum compiler and the quantum hardware. Most current software for quantum optimal control (e.g. Qutip or Krotov) is restricted to run on shared memory platforms, limiting their applicability to smaller quantum systems, in particular if interactions with the environment are taken into account. This paper gives an overview of the open-source code Quandary, which is designed to solve quantum control problems in larger open quantum systems modelled by Lindblad's master equation. Implemented in C++, Quandary uses the message passing paradigm for distributed memory computers that enables scalability to large numbers of compute cores. Accompanied by numerical examples, this paper presents an overview on existing theoretical developments for open optimal quantum control realizing state-to-state transfer, unitary gate optimization as well as state-preparation, and presents the numerical tools and implementation aspect as realized in Quandary, for deployment on modern high-performance computing platforms.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Quantum Optimal Control for Pure-State Preparation Using One Initial State
Authors:
Stefanie Günther,
N. Anders Petersson,
Jonathan L. DuBois
Abstract:
This paper presents a framework for solving the pure-state preparation problem using numerical optimal control. As an example, we consider the case where a number of qubits are dispersively coupled to a readout cavity. We model open system quantum dynamics using the Markovian Lindblad master equation, driven by external control pulses. The main result of this paper develops a basis of density matr…
▽ More
This paper presents a framework for solving the pure-state preparation problem using numerical optimal control. As an example, we consider the case where a number of qubits are dispersively coupled to a readout cavity. We model open system quantum dynamics using the Markovian Lindblad master equation, driven by external control pulses. The main result of this paper develops a basis of density matrices (a parameterization) where each basis element is a density matrix itself. Utilizing a specific objective function, we show how an ensemble of the basis elements can be used as a single initial state throughout the optimization process - independent of the system dimension. We apply the general framework to the specific application of ground-state reset of one and two qubits coupled to a readout cavity.
△ Less
Submitted 12 August, 2021; v1 submitted 16 June, 2021;
originally announced June 2021.
-
Low frequency correlated charge noise measurements across multiple energy transitions in a tantalum transmon
Authors:
Daniel M. Tennant,
Luis A. Martinez,
Kristin M. Beck,
Sean R. O'Kelley,
Christopher D. Wilen,
R. McDermott,
Jonathan L DuBois,
Yaniv J. Rosen
Abstract:
Transmon qubits fabricated with tantalum metal have been shown to possess energy relaxation times greater than 300 $μ$s and, as such, present an attractive platform for high precision, correlated noise studies across multiple higher energy transitions. Tracking the multi-level fluctuating qudit frequencies with a precision enabled by the high coherence of the device allows us to extract the charge…
▽ More
Transmon qubits fabricated with tantalum metal have been shown to possess energy relaxation times greater than 300 $μ$s and, as such, present an attractive platform for high precision, correlated noise studies across multiple higher energy transitions. Tracking the multi-level fluctuating qudit frequencies with a precision enabled by the high coherence of the device allows us to extract the charge offset and quasi-particle dynamics. We observe qualitatively different charge offset behavior in the tantalum device than those measured in previous low frequency charge noise studies. In particular, we find the charge offset dynamics are dominated by rare, discrete jumps between a finite number of quasi-stationary charge configurations, a previously unobserved charge noise process in superconducting qubits.
△ Less
Submitted 29 November, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Losses in interacting quantum gases: ultra-violet divergence and its regularization
Authors:
Isabelle Bouchoule,
Léa Dubois,
Léo-Paul Barbier
Abstract:
We investigate the effect of losses on an interacting quantum gas. We show that, for gases in dimension higher than one, assuming together a vanishing correlation time of the reservoir where dissipation occurs, and contact interactions leads to a divergence of the energy increase rate. This divergence is a combined effect of the contact interactions, which impart arbitrary large momenta to the ato…
▽ More
We investigate the effect of losses on an interacting quantum gas. We show that, for gases in dimension higher than one, assuming together a vanishing correlation time of the reservoir where dissipation occurs, and contact interactions leads to a divergence of the energy increase rate. This divergence is a combined effect of the contact interactions, which impart arbitrary large momenta to the atoms, and the infinite energy width of the reservoir associated to its vanishing correlation time. We show how the divergence is regularized when taking into account the finite energy width of the reservoir, and, for large energy width, we give an expression for the energy increase rate that involves the contact parameter. We then consider the specific case of a weakly interacting Bose Einstein condensate, that we describe using the Bogoliubov theory. Assuming slow losses so that the gas is at any time described by a thermal equilibrium, we compute the time evolution of the temperature of the gas. Using a Bogoliubov analysis, we also consider the case where the regularization of the divergence is due to the finite range of the interaction between atoms.
△ Less
Submitted 22 June, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Control optimization for parametric hamiltonians by pulse reconstruction
Authors:
Piero Luchi,
Francesco Turro,
Valentina Amitrano,
Francesco Pederiva,
Xian Wu,
Kyle Wendt,
Jonathan L Dubois,
Sofia Quaglioni
Abstract:
Optimal control techniques provide a means to tailor the control pulses required to generate customized quantum gates, which helps to improve the resilience of quantum simulations to gate errors and device noise. However, the significant amount of (classical) computation required to generate customized gates can quickly undermine the effectiveness of this approach, especially when pulse optimizati…
▽ More
Optimal control techniques provide a means to tailor the control pulses required to generate customized quantum gates, which helps to improve the resilience of quantum simulations to gate errors and device noise. However, the significant amount of (classical) computation required to generate customized gates can quickly undermine the effectiveness of this approach, especially when pulse optimization needs to be iterated. We propose a method to reduce the computational time required to generate the control pulse for a Hamiltonian that is parametrically dependent on a time-varying quantity. We use simple interpolation schemes to accurately reconstruct the control pulses from a set of pulses obtained in advance for a discrete set of predetermined parameter values. We obtain a reconstruction with very high fidelity and a significant reduction in computational effort. We report the results of the application of the proposed method to device-level quantum simulations of the unitary (real) time evolution of two interacting neutrons based on superconducting qubits.
△ Less
Submitted 6 September, 2023; v1 submitted 24 February, 2021;
originally announced February 2021.
-
Imaginary Time Propagation on a Quantum Chip
Authors:
Francesco Turro,
Alessandro Roggero,
Valentina Amitrano,
Piero Luchi,
Kyle A. Wendt,
Jonathan L DuBois,
Sofia Quaglioni,
Francesco Pederiva
Abstract:
Evolution in imaginary time is a prominent technique for finding the ground state of quantum many-body systems, and the heart of a number of numerical methods that have been used with great success in quantum chemistry, condensed matter and nuclear physics. We propose an algorithm to implement imaginary time propagation on a quantum computer. Our algorithm is devised in the context of an efficient…
▽ More
Evolution in imaginary time is a prominent technique for finding the ground state of quantum many-body systems, and the heart of a number of numerical methods that have been used with great success in quantum chemistry, condensed matter and nuclear physics. We propose an algorithm to implement imaginary time propagation on a quantum computer. Our algorithm is devised in the context of an efficient encoding into an optimized gate, drawing on the underlying characteristics of the quantum device, of a unitary operation in an extended Hilbert space. However, we proved that for simple problems it can be successfully applied to standard digital quantum machines. This work paves the way for porting quantum many-body methods based on imaginary-time propagation to near-term quantum devices, enabling the future quantum simulation of the ground states of a broad class of microscopic systems.
△ Less
Submitted 12 November, 2021; v1 submitted 24 February, 2021;
originally announced February 2021.
-
Correlated Charge Noise and Relaxation Errors in Superconducting Qubits
Authors:
C. D. Wilen,
S. Abdullah,
N. A. Kurinsky,
C. Stanford,
L. Cardani,
G. D'Imperio,
C. Tomei,
L. Faoro,
L. B. Ioffe,
C. H. Liu,
A. Opremcak,
B. G. Christensen,
J. L. DuBois,
R. McDermott
Abstract:
The central challenge in building a quantum computer is error correction. Unlike classical bits, which are susceptible to only one type of error, quantum bits ("qubits") are susceptible to two types of error, corresponding to flips of the qubit state about the $X$- and $Z$-directions. While the Heisenberg Uncertainty Principle precludes simultaneous monitoring of $X$- and $Z$-flips on a single qub…
▽ More
The central challenge in building a quantum computer is error correction. Unlike classical bits, which are susceptible to only one type of error, quantum bits ("qubits") are susceptible to two types of error, corresponding to flips of the qubit state about the $X$- and $Z$-directions. While the Heisenberg Uncertainty Principle precludes simultaneous monitoring of $X$- and $Z$-flips on a single qubit, it is possible to encode quantum information in large arrays of entangled qubits that enable accurate monitoring of all errors in the system, provided the error rate is low. Another crucial requirement is that errors cannot be correlated. Here, we characterize a superconducting multiqubit circuit and find that charge fluctuations are highly correlated on a length scale over 600~$μ$m; moreover, discrete charge jumps are accompanied by a strong transient suppression of qubit energy relaxation time across the millimeter-scale chip. The resulting correlated errors are explained in terms of the charging event and phonon-mediated quasiparticle poisoning associated with absorption of gamma rays and cosmic-ray muons in the qubit substrate. Robust quantum error correction will require the development of mitigation strategies to protect multiqubit arrays from correlated errors due to particle impacts.
△ Less
Submitted 15 December, 2020; v1 submitted 10 December, 2020;
originally announced December 2020.
-
Nonlinear Signal Distortion Corrections Through Quantum Sensing
Authors:
Kevin R. Chaves,
Xian Wu,
Yaniv J. Rosen,
Jonathan L DuBois
Abstract:
Having accurate gate generation is essential for precise control of a quantum system. The generated gate usually suffers from linear and nonlinear distortion. Previous works have demonstrated how to use a qubit to correct linear frequency distortions but have not commented on how to handle nonlinear distortions. This is an important issue as we show that nonlinear amplitude distortions from the RF…
▽ More
Having accurate gate generation is essential for precise control of a quantum system. The generated gate usually suffers from linear and nonlinear distortion. Previous works have demonstrated how to use a qubit to correct linear frequency distortions but have not commented on how to handle nonlinear distortions. This is an important issue as we show that nonlinear amplitude distortions from the RF electronics can affect Rabi pulses by as much as 10%. We present work that demonstrates how a transmon qubit can be used as a highly sensitive cryogenic detector to characterize these nonlinear amplitude distortions. We show that a correction can drive these errors down to <1% over a 700 MHz range. This correction technique provides a method to minimize the effects of signal distortions and can be easily applied to broadband control pulses to produce higher fidelity arbitrary quantum gates.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Bilinear dynamic mode decomposition for quantum control
Authors:
Andy Goldschmidt,
Eurika Kaiser,
Jonathan L. Dubois,
Steven L. Brunton,
J. Nathan Kutz
Abstract:
Data-driven methods for establishing quantum optimal control (QOC) using time-dependent control pulses tailored to specific quantum dynamical systems and desired control objectives are critical for many emerging quantum technologies. We develop a data-driven regression procedure, bilinear dynamic mode decomposition (biDMD), that leverages time-series measurements to establish quantum system identi…
▽ More
Data-driven methods for establishing quantum optimal control (QOC) using time-dependent control pulses tailored to specific quantum dynamical systems and desired control objectives are critical for many emerging quantum technologies. We develop a data-driven regression procedure, bilinear dynamic mode decomposition (biDMD), that leverages time-series measurements to establish quantum system identification for QOC. The biDMD optimization framework is a physics-informed regression that makes use of the known underlying Hamiltonian structure. Further, the biDMD can be modified to model both fast and slow sampling of control signals, the latter by way of stroboscopic sampling strategies. The biDMD method provides a flexible, interpretable, and adaptive regression framework for real-time, online implementation in quantum systems. Further, the method has strong theoretical connections to Koopman theory, which approximates non-linear dynamics with linear operators. In comparison with many machine learning paradigms, it requires minimal data and the biDMD model is easily updated as new data is collected. We demonstrate the efficacy and performance of the approach on a number of representative quantum systems, showing that it also matches experimental results.
△ Less
Submitted 2 December, 2020; v1 submitted 27 October, 2020;
originally announced October 2020.
-
Origin of Mechanical and Dielectric Losses from Two-Level Systems in Amorphous Silicon
Authors:
M. Molina-Ruiz,
Y. J. Rosen,
H. C. Jacks,
M. R. Abernathy,
T. H. Metcalf,
X. Liu,
J. L Dubois,
F. Hellman
Abstract:
Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losse…
▽ More
Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losses are the same; the former relies on phonon-TLS coupling, with an elastic field coupling constant, $γ$, while the latter depends on a TLS dipole moment, $p_0$, which couples to the electromagnetic field. Mechanical and dielectric loss measurements as well as structural characterization were performed on amorphous silicon thin films grown by electron beam deposition with a range of growth parameters. Samples grown at 425 $^{\circ}$C show a large reduction of mechanical loss (34 times) and a far smaller reduction of dielectric loss (2.3 times) compared to those grown at room temperature. Additionally, mechanical loss shows lower loss per unit volume for thicker films, while dielectric loss shows lower loss per unit volume for thinner films. Analysis of these results indicate that mechanical loss correlates with atomic density, while dielectric loss correlates with dangling bond density, suggesting a different origin for these two energy dissipation processes in amorphous silicon.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Two lower bounds for $p$-centered colorings
Authors:
Loïc Dubois,
Gwenaël Joret,
Guillem Perarnau,
Marcin Pilipczuk,
François Pitois
Abstract:
Given a graph $G$ and an integer $p$, a coloring $f : V(G) \to \mathbb{N}$ is \emph{$p$-centered} if for every connected subgraph $H$ of $G$, either $f$ uses more than $p$ colors on $H$ or there is a color that appears exactly once in $H$. The notion of $p$-centered colorings plays a central role in the theory of sparse graphs. In this note we show two lower bounds on the number of colors required…
▽ More
Given a graph $G$ and an integer $p$, a coloring $f : V(G) \to \mathbb{N}$ is \emph{$p$-centered} if for every connected subgraph $H$ of $G$, either $f$ uses more than $p$ colors on $H$ or there is a color that appears exactly once in $H$. The notion of $p$-centered colorings plays a central role in the theory of sparse graphs. In this note we show two lower bounds on the number of colors required in a $p$-centered coloring.
First, we consider monotone classes of graphs whose shallow minors have average degree bounded polynomially in the radius, or equivalently (by a result of Dvořák and Norin), admitting strongly sublinear separators. We construct such a class such that $p$-centered colorings require a number of colors super-polynomial in $p$. This is in contrast with a recent result of Pilipczuk and Siebertz, who established a polynomial upper bound in the special case of graphs excluding a fixed minor.
Second, we consider graphs of maximum degree $Δ$. Dębski, Felsner, Micek, and Schröder recently proved that these graphs have $p$-centered colorings with $O(Δ^{2-1/p} p)$ colors. We show that there are graphs of maximum degree $Δ$ that require $Ω(Δ^{2-1/p} p \ln^{-1/p}Δ)$ colors in any $p$-centered coloring, thus matching their upper bound up to a logarithmic factor.
△ Less
Submitted 28 October, 2020; v1 submitted 7 June, 2020;
originally announced June 2020.
-
Improving Qubit Readout with Hidden Markov Models
Authors:
Luis A. Martinez,
Yaniv J. Rosen,
Jonathan L. DuBois
Abstract:
We demonstrate the application of pattern recognition algorithms via hidden Markov models (HMM) for qubit readout. This scheme provides a state-path trajectory approach capable of detecting qubit state transitions and makes for a robust classification scheme with higher starting state assignment fidelity than when compared to a multivariate Gaussian (MVG) or a support vector machine (SVM) scheme.…
▽ More
We demonstrate the application of pattern recognition algorithms via hidden Markov models (HMM) for qubit readout. This scheme provides a state-path trajectory approach capable of detecting qubit state transitions and makes for a robust classification scheme with higher starting state assignment fidelity than when compared to a multivariate Gaussian (MVG) or a support vector machine (SVM) scheme. Therefore, the method also eliminates the qubit-dependent readout time optimization requirement in current schemes. Using a HMM state discriminator we estimate fidelities reaching the ideal limit. Unsupervised learning gives access to transition matrix, priors, and IQ distributions, providing a toolbox for studying qubit state dynamics during strong projective readout.
△ Less
Submitted 31 October, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
High-fidelity software-defined quantum logic on a superconducting qudit
Authors:
Xian Wu,
S. L. Tomarken,
N. Anders Petersson,
L. A. Martinez,
Yaniv J. Rosen,
Jonathan L DuBois
Abstract:
Nearly all modern solid-state quantum processors approach quantum computation with a set of discrete qubit operations (gates) that can achieve universal quantum control with only a handful of primitive gates. In principle, this approach is highly flexible, allowing full control over the qubits' Hilbert space without necessitating the development of specific control protocols for each application.…
▽ More
Nearly all modern solid-state quantum processors approach quantum computation with a set of discrete qubit operations (gates) that can achieve universal quantum control with only a handful of primitive gates. In principle, this approach is highly flexible, allowing full control over the qubits' Hilbert space without necessitating the development of specific control protocols for each application. However, current error rates on quantum hardware place harsh limits on the number of primitive gates that can be concatenated together (with compounding error rates) and remain viable. Here, we report our efforts at implementing a software-defined $0\leftrightarrow2$ SWAP gate that does not rely on a primitive gate set and achieves an average gate fidelity of $99.4\%$. Our work represents an alternative, fully generalizable route towards achieving nontrivial quantum control through the use of optimal control techniques. We describe our procedure for computing optimal control solutions, calibrating the quantum and classical hardware chain, and characterizing the fidelity of the optimal control gate.
△ Less
Submitted 19 October, 2020; v1 submitted 27 May, 2020;
originally announced May 2020.
-
Simulating nonnative cubic interactions on noisy quantum machines
Authors:
Yuan Shi,
Alessandro R. Castelli,
Xian Wu,
Ilon Joseph,
Vasily Geyko,
Frank R. Graziani,
Stephen B. Libby,
Jeffrey B. Parker,
Yaniv J. Rosen,
Luis A. Martinez,
Jonathan L DuBois
Abstract:
As a milestone for general-purpose computing machines, we demonstrate that quantum processors can be programmed to efficiently simulate dynamics that are not native to the hardware. Moreover, on noisy devices without error correction, we show that simulation results are significantly improved when the quantum program is compiled using modular gates instead of a restricted set of standard gates. We…
▽ More
As a milestone for general-purpose computing machines, we demonstrate that quantum processors can be programmed to efficiently simulate dynamics that are not native to the hardware. Moreover, on noisy devices without error correction, we show that simulation results are significantly improved when the quantum program is compiled using modular gates instead of a restricted set of standard gates. We demonstrate the general methodology by solving a cubic interaction problem, which appears in nonlinear optics, gauge theories, as well as plasma and fluid dynamics. To encode the nonnative Hamiltonian evolution, we decompose the Hilbert space into a direct sum of invariant subspaces in which the nonlinear problem is mapped to a finite-dimensional Hamiltonian simulation problem. In a three-states example, the resultant unitary evolution is realized by a product of ~20 standard gates, using which ~10 simulation steps can be carried out on state-of-the-art quantum hardware before results are corrupted by decoherence. In comparison, the simulation depth is improved by more than an order of magnitude when the unitary evolution is realized as a single cubic gate, which is compiled directly using optimal control. Alternatively, parametric gates may also be compiled by interpolating control pulses. Modular gates thus obtained provide high-fidelity building blocks for quantum Hamiltonian simulations.
△ Less
Submitted 13 February, 2021; v1 submitted 15 April, 2020;
originally announced April 2020.
-
Discrete Adjoints for Accurate Numerical Optimization with Application to Quantum Control
Authors:
N. Anders Petersson,
Fortino M. Garcia,
Austin E. Copeland,
Ylva L. Rydin,
Jonathan L. DuBois
Abstract:
This paper considers the optimal control problem for realizing logical gates in a closed quantum system. The quantum state is governed by Schrodinger's equation, which we formulate as a time-dependent Hamiltonian system in terms of the real and imaginary parts of the state vector. The system is discretized with the Stormer-Verlet scheme, which is a symplectic partitioned Runge-Kutta method. Our ma…
▽ More
This paper considers the optimal control problem for realizing logical gates in a closed quantum system. The quantum state is governed by Schrodinger's equation, which we formulate as a time-dependent Hamiltonian system in terms of the real and imaginary parts of the state vector. The system is discretized with the Stormer-Verlet scheme, which is a symplectic partitioned Runge-Kutta method. Our main theoretical contribution is the derivation of a compatible time-discretization of the adjoint state equation, such that the gradient of the discrete objective function can be calculated exactly, at a computational cost of solving two Schrödinger systems, independently of the number of parameters in the control functions. A parameterization of the control functions based on B-splines with built-in carrier waves is also introduced. The carrier waves are used to specify the frequency spectra of the control functions, while the B-spline functions specify their envelope and phase. This approach allows the number of control parameters to be independent of, and significantly smaller than, the number of time steps for integrating Schrodinger's equation. We consider Hamiltonians that model the dynamics of a superconducting multi-level qudit and present numerical examples of how the proposed technique can be combined with the interior point L-BFGS algorithm from the IPOPT package for realizing quantum gates. In a set of test cases, the proposed algorithm is shown to compare favorably with QuTiP/pulse_optim and Grape-Tensorflow.
△ Less
Submitted 19 November, 2020; v1 submitted 3 January, 2020;
originally announced January 2020.
-
Optimal Control for the Quantum Simulation of Nuclear Dynamics
Authors:
Eric T. Holland,
Kyle A. Wendt,
Konstantinos Kravvaris,
Xian Wu,
W. Erich Ormand,
Jonathan L DuBois,
Sofia Quaglioni,
Francesco Pederiva
Abstract:
We propose a method for enacting the unitary time propagation of two interacting neutrons at leading order of chiral effective field theory by efficiently encoding the nuclear dynamics into a single multi-level quantum device. The emulated output of the quantum simulation shows that, by applying a single gate that draws on the underlying characteristics of the device, it is possible to observe mul…
▽ More
We propose a method for enacting the unitary time propagation of two interacting neutrons at leading order of chiral effective field theory by efficiently encoding the nuclear dynamics into a single multi-level quantum device. The emulated output of the quantum simulation shows that, by applying a single gate that draws on the underlying characteristics of the device, it is possible to observe multiple cycles of the nucleons' dynamics before the onset of decoherence. Owing to the signal's longevity, we can then extract spectroscopic properties of the simulated nuclear system. This allows us to validate the encoding of the nuclear Hamiltonian and the robustness of the simulation in the presence of quantum-hardware noise by comparing the extracted spectroscopic information to exact calculations. This work paves the way for transformative calculations of dynamical properties of nuclei on near-term quantum devices.
△ Less
Submitted 22 August, 2019;
originally announced August 2019.
-
Anomalous Charge Noise in Superconducting Qubits
Authors:
B. G. Christensen,
C. D. Wilen,
A. Opremcak,
J. Nelson,
F. Schlenker,
C. H. Zimonick,
L. Faoro,
L. B. Ioffe,
Y. J. Rosen,
J. L. DuBois,
B. L. T. Plourde,
R. McDermott
Abstract:
We have used Ramsey tomography to characterize charge noise in a weakly charge-sensitive superconducting qubit. We find a charge noise that scales with frequency as $1/f^α$ over 5 decades with $α= 1.93$ and a magnitude $S_q(\text{1Hz})= 2.9\times10^{-4}~e^2/\text{Hz}$. The noise exponent and magnitude of the low-frequency noise are much larger than those seen in prior work on single electron trans…
▽ More
We have used Ramsey tomography to characterize charge noise in a weakly charge-sensitive superconducting qubit. We find a charge noise that scales with frequency as $1/f^α$ over 5 decades with $α= 1.93$ and a magnitude $S_q(\text{1Hz})= 2.9\times10^{-4}~e^2/\text{Hz}$. The noise exponent and magnitude of the low-frequency noise are much larger than those seen in prior work on single electron transistors, yet are consistent with reports of frequency noise in other superconducting qubits. Moreover, we observe frequent large-amplitude jumps in offset charge exceeding 0.1$e$; these large discrete charge jumps are incompatible with a picture of localized dipole-like two-level fluctuators. The data reveal an unexpected dependence of charge noise on device scale and suggest models involving either charge drift or fluctuating patch potentials.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
Protecting superconducting qubits from phonon mediated decay
Authors:
Yaniv J. Rosen,
Matthew Horsley,
Sara E. Harrison,
Eric T. Holland,
Allan S. Chang,
Tiziana Bond,
Jonathan L DuBois
Abstract:
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present…
▽ More
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present a method to enhance the coherence of superconducting circuits by introducing a phononic bandgap around the device operating frequency. The phononic bandgaps block resonant decay of defect states within the gapped frequency range, removing the electromagnetic coupling to phonons at the gap frequencies. We construct a multi-scale model that derives the decrease in the density of states due to the bandgap and the resulting increase in defect state $T_1$ times. We demonstrate that emission rates from in-plane defect states can be suppressed by up to two orders of magnitude. We combine these simulations with theory for resonators operated in the continuous-wave regime and show that improvements in quality factors are expected by up to the enhancement in defect $T_1$ times. Furthermore, we use full master equation simulation to demonstrate the suppression of qubit energy relaxation even when interacting with 200 defects states. We conclude with an exploration of device implementation including tradeoffs between fabrication complexity and qubit performance.
△ Less
Submitted 1 May, 2019; v1 submitted 14 March, 2019;
originally announced March 2019.
-
SONYC: A System for the Monitoring, Analysis and Mitigation of Urban Noise Pollution
Authors:
Juan Pablo Bello,
Claudio Silva,
Oded Nov,
R. Luke DuBois,
Anish Arora,
Justin Salamon,
Charles Mydlarz,
Harish Doraiswamy
Abstract:
We present the Sounds of New York City (SONYC) project, a smart cities initiative focused on developing a cyber-physical system for the monitoring, analysis and mitigation of urban noise pollution. Noise pollution is one of the topmost quality of life issues for urban residents in the U.S. with proven effects on health, education, the economy, and the environment. Yet, most cities lack the resourc…
▽ More
We present the Sounds of New York City (SONYC) project, a smart cities initiative focused on developing a cyber-physical system for the monitoring, analysis and mitigation of urban noise pollution. Noise pollution is one of the topmost quality of life issues for urban residents in the U.S. with proven effects on health, education, the economy, and the environment. Yet, most cities lack the resources to continuously monitor noise and understand the contribution of individual sources, the tools to analyze patterns of noise pollution at city-scale, and the means to empower city agencies to take effective, data-driven action for noise mitigation. The SONYC project advances novel technological and socio-technical solutions that help address these needs.
SONYC includes a distributed network of both sensors and people for large-scale noise monitoring. The sensors use low-cost, low-power technology, and cutting-edge machine listening techniques, to produce calibrated acoustic measurements and recognize individual sound sources in real time. Citizen science methods are used to help urban residents connect to city agencies and each other, understand their noise footprint, and facilitate reporting and self-regulation. Crucially, SONYC utilizes big data solutions to analyze, retrieve and visualize information from sensors and citizens, creating a comprehensive acoustic model of the city that can be used to identify significant patterns of noise pollution. These data can be used to drive the strategic application of noise code enforcement by city agencies to optimize the reduction of noise pollution. The entire system, integrating cyber, physical and social infrastructure, forms a closed loop of continuous sensing, analysis and actuation on the environment.
SONYC provides a blueprint for the mitigation of noise pollution that can potentially be applied to other cities in the US and abroad.
△ Less
Submitted 18 May, 2018; v1 submitted 2 May, 2018;
originally announced May 2018.
-
High-Kinetic Inductance Additive Manufactured Superconducting Microwave Cavity
Authors:
Eric T. Holland,
Yaniv J. Rosen,
Nicholas Materise,
Nathan Woollett,
Thomas Voisin,
Y. Morris Wang,
Jorge Mireles,
Gianpaolo Carosi,
Jonathan L DuBois
Abstract:
Investigations into the microwave surface impedance of superconducting resonators have led to the development of single photon counters that rely on kinetic inductance for their operation. While concurrent progress in additive manufacturing, `3D printing', opens up a previously inaccessible design space for waveguide resonators. In this manuscript, we present results from the first synthesis of th…
▽ More
Investigations into the microwave surface impedance of superconducting resonators have led to the development of single photon counters that rely on kinetic inductance for their operation. While concurrent progress in additive manufacturing, `3D printing', opens up a previously inaccessible design space for waveguide resonators. In this manuscript, we present results from the first synthesis of these two technologies in a titanium, aluminum, vanadium (Ti-6Al-4V) superconducting radio frequency resonator which exploits a design unattainable through conventional fabrication means. We find that Ti-6Al-4V has two distinct superconducting transition temperatures observable in heat capacity measurements. The higher transition temperature is in agreement with DC resistance measurements. While the lower transition temperature, not previously known in literature, is consistent with the observed temperature dependence of the superconducting microwave surface impedance. From the surface reactance, we extract a London penetration depth of $8\pm3μ$m - roughly an order of magnitude larger than other titanium alloys and several orders of magnitude larger than other conventional elemental superconductors. This large London penetration depth suggests that Ti-6Al-4V may be a suitable material for high kinetic inductance applications such as single photon counting or parametric amplification used in quantum computing.
△ Less
Submitted 14 August, 2017;
originally announced August 2017.
-
Overcoming the fermion sign problem in homogeneous systems
Authors:
Jonathan L DuBois,
Ethan W. Brown,
Berni J. Alder
Abstract:
Explicit treatment of many-body Fermi statistics in path integral Monte Carlo (PIMC) results in exponentially scaling computational cost due to the near cancellation of contributions to observables from even and odd permutations. Through direct analysis of exchange statistics we find that individual exchange probabilities in homogeneous systems are, except for finite size effects, independent of t…
▽ More
Explicit treatment of many-body Fermi statistics in path integral Monte Carlo (PIMC) results in exponentially scaling computational cost due to the near cancellation of contributions to observables from even and odd permutations. Through direct analysis of exchange statistics we find that individual exchange probabilities in homogeneous systems are, except for finite size effects, independent of the configuration of other permutations present. For two representative systems, 3-He and the homogeneous electron gas, we show that this allows the entire antisymmetrized density matrix to be generated from a simple model depending on only a few parameters obtainable directly from a standard PIMC simulation. The result is a polynomial scaling algorithm and up to a 10 order of magnitude increase in efficiency in measuring fermionic observables for the systems considered.
△ Less
Submitted 10 September, 2014;
originally announced September 2014.
-
Squeezed and fragmented states of strongly interacting bosons in a double well. Part II: Quantum Monte Carlo simulations
Authors:
Joel C. Corbo,
Jonathan L. DuBois,
K. Birgitta Whaley
Abstract:
We present path integral ground state (PIGS) quantum Monte Carlo calculations for the ground state ($T = 0$) properties of repulsively interacting bosons in a three-dimensional external double well potential over a range of interaction strengths and potential parameters. We focus our calculations on ground state number statistics and the one-body density matrix in order to understand the level of…
▽ More
We present path integral ground state (PIGS) quantum Monte Carlo calculations for the ground state ($T = 0$) properties of repulsively interacting bosons in a three-dimensional external double well potential over a range of interaction strengths and potential parameters. We focus our calculations on ground state number statistics and the one-body density matrix in order to understand the level of squeezing and fragmentation that the system exhibits as a function of interaction strength. We compare our PIGS results to both a two-mode model and a recently-proposed eight-mode model. For weak interactions, the various models agree with the numerically exact PIGS simulations. However, the models fail to correctly predict the amount of squeezing and fragmentation exhibited by the PIGS simulations for strong interactions. One novel and somewhat surprising result from our simulations involves the relationship between squeezing and interaction strength: rather than a monotonic relationship between these quantities, we find that for certain barrier heights the squeezing increases as a function of interaction strength until it reaches a maximum, after which it decreases again. We also see a similar relationship between fragmentation and interaction strength. We discuss the physical mechanisms that account for this behavior and the implications for the design of atom interferometers, which can use squeezed states to reduce measurement uncertainty.
△ Less
Submitted 11 October, 2017; v1 submitted 8 April, 2014;
originally announced April 2014.
-
Number squeezed and fragmented states of strongly interacting bosons in a double well
Authors:
Joel C. Corbo,
Jonathan L. DuBois,
K. Birgitta Whaley
Abstract:
We present a systematic study of the phenomena of number squeezing and fragmentation for a repulsive Bose-Einstein condensate (BEC) in a three dimensional double well potential over a range of interaction strengths and barrier heights, including geometries that exhibit appreciable overlap in the one-body wavefunctions localized in the left and right wells. We compute the properties of the condensa…
▽ More
We present a systematic study of the phenomena of number squeezing and fragmentation for a repulsive Bose-Einstein condensate (BEC) in a three dimensional double well potential over a range of interaction strengths and barrier heights, including geometries that exhibit appreciable overlap in the one-body wavefunctions localized in the left and right wells. We compute the properties of the condensate with numerically exact, full dimensional path integral ground state (PIGS) Quantum Monte Carlo simulations and compare with results obtained from using two- and eight-mode truncated basis models. The truncated basis models are found to agree with the numerically exact PIGS simulations for weak interactions, but fail to correctly predict the amount of number squeezing and fragmentation exhibited by the PIGS simulations for strong interactions. We find that both number squeezing and fragmentation of the BEC show non-monotonic behavior at large values of interaction strength a. The number squeezing shows a universal scaling with the product of number of particles and interaction strength (Na) but no such universal behavior is found for fragmentation. Detailed analysis shows that the introduction of repulsive interactions not only suppresses number fluctuations to enhance number squeezing, but can also enhance delocalization across wells and tunneling between wells, each of which may suppress number squeezing. This results in a dynamical competition whose resolution shows a complex dependence on all three physical parameters defining the system: interaction strength, number of particles, and barrier height.
△ Less
Submitted 11 October, 2017; v1 submitted 8 April, 2014;
originally announced April 2014.
-
Magnetic fluctuation from oxygen deficiency centers on the SiO$_2$ surface
Authors:
Nicole Adelstein,
Donghwa Lee,
Jonathan L. DuBois,
Vincenzo Lordi
Abstract:
The magnetic stability of oxygen deficiency centers on the surface of α-quartz is investigated with first- principles calculations to understand their role in contributing to magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Magnetic defects on the substrate are likely responsible for some of the…
▽ More
The magnetic stability of oxygen deficiency centers on the surface of α-quartz is investigated with first- principles calculations to understand their role in contributing to magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Magnetic defects on the substrate are likely responsible for some of the 1/f noise that plagues these systems. Dangling-bonds associated with three-coordinated Si atoms allow electron density transfer between spin up and down channels, resulting in low energy magnetic states. Such under-coordinated Si defects are common in both stoichiometric and oxygen deficient silica and quartz and are a probable source of magnetic flux fluctuations in SQs and SQUIDs.
△ Less
Submitted 4 March, 2014;
originally announced March 2014.
-
Exchange-correlation energy for the 3D homogeneous electron gas at arbitrary temperature
Authors:
Ethan W. Brown,
Jonathan L. DuBois,
Markus Holzmann,
David M. Ceperley
Abstract:
We fit finite-temperature path integral Monte Carlo calculations of the exchange-correlation energy of the 3D finite-temperature homogeneous electron gas in the warm-dense regime (r_{s} = (3/4πn)^{1/3} a_{B}^{-1} < 40 and Θ= T/T_{F} > 0.0625). In doing so, we construct a Padé approximant which collapses to Debye-Hückel theory in the high-temperature, low-density limit. Likewise, the zero-temperatu…
▽ More
We fit finite-temperature path integral Monte Carlo calculations of the exchange-correlation energy of the 3D finite-temperature homogeneous electron gas in the warm-dense regime (r_{s} = (3/4πn)^{1/3} a_{B}^{-1} < 40 and Θ= T/T_{F} > 0.0625). In doing so, we construct a Padé approximant which collapses to Debye-Hückel theory in the high-temperature, low-density limit. Likewise, the zero-temperature limit matches the numerical results of ground-state quantum Monte Carlo, as well as analytical results in the high-density limit.
△ Less
Submitted 8 August, 2013; v1 submitted 7 June, 2013;
originally announced June 2013.
-
Path Integral Monte Carlo Simulation of the Warm-Dense Homogeneous Electron Gas
Authors:
Ethan W. Brown,
Bryan K. Clark,
Jonathan L. DuBois,
David M. Ceperley
Abstract:
We perform calculations of the {3D} finite-temperature homogeneous electron gas (HEG) in the warm-dense regime ({r_{s} \equiv (3/4πn)^{1/3}a_{B}^{- 1} = 1.0- 40.0} and {Θ\equiv T/T_{F} = 0.0625- 8.0}) using restricted path integral Monte Carlo (RPIMC). Precise energies, pair correlation functions, and structure factors are obtained. For all densities, we find a significant discrepancy between the…
▽ More
We perform calculations of the {3D} finite-temperature homogeneous electron gas (HEG) in the warm-dense regime ({r_{s} \equiv (3/4πn)^{1/3}a_{B}^{- 1} = 1.0- 40.0} and {Θ\equiv T/T_{F} = 0.0625- 8.0}) using restricted path integral Monte Carlo (RPIMC). Precise energies, pair correlation functions, and structure factors are obtained. For all densities, we find a significant discrepancy between the ground state parameterized local density approximation (LDA) and our results around {T_{F}} . These results can be used as a benchmark for improved functionals, as well as input for orbital-free DFT formulations.
△ Less
Submitted 5 December, 2012; v1 submitted 26 November, 2012;
originally announced November 2012.
-
Bounds for the state-modulated resolvent of a linear Boltzmann generator
Authors:
Jeremy Clark,
Loïc Dubois
Abstract:
We study a generalized resolvent for the generator of a Markovian semigroup. The Markovian generator appears in a linear Boltzmann equation modeling a one-dimensional test particle in a periodic potential and colliding elastically with particles from an ideal background gas. We obtain bounds for the state-modulated resolvent which are relevant in the regime where the mass ratio between the test pa…
▽ More
We study a generalized resolvent for the generator of a Markovian semigroup. The Markovian generator appears in a linear Boltzmann equation modeling a one-dimensional test particle in a periodic potential and colliding elastically with particles from an ideal background gas. We obtain bounds for the state-modulated resolvent which are relevant in the regime where the mass ratio between the test particle and a particle from the gas is large. These bounds relate to the typical amount of time that the particle spends in different regions of phase space before arriving to a region around the origin.
△ Less
Submitted 4 October, 2011;
originally announced October 2011.
-
A Brownian particle in a microscopic periodic potential
Authors:
Jeremy Clark,
Loïc Dubois
Abstract:
We study a model for a massive test particle in a microscopic periodic potential and interacting with a reservoir of light particles. In the regime considered, the fluctuations in the test particle's momentum resulting from collisions typically outweigh the shifts in momentum generated by the periodic force, and so the force is effectively a perturbative contribution. The mathematical starting poi…
▽ More
We study a model for a massive test particle in a microscopic periodic potential and interacting with a reservoir of light particles. In the regime considered, the fluctuations in the test particle's momentum resulting from collisions typically outweigh the shifts in momentum generated by the periodic force, and so the force is effectively a perturbative contribution. The mathematical starting point is an idealized reduced dynamics for the test particle given by a linear Boltzmann equation. In the limit that the mass ratio of a single reservoir particle to the test particle tends to zero, we show that there is convergence to the Ornstein-Uhlenbeck process under the standard normalizations for the test particle variables. Our analysis is primarily directed towards bounding the perturbative effect of the periodic potential on the particle's momentum.
△ Less
Submitted 13 July, 2014; v1 submitted 4 October, 2011;
originally announced October 2011.
-
A uniform contraction principle for bounded Apollonian embeddings
Authors:
Loïc Dubois,
Hans Henrik Rugh
Abstract:
Let H denote the standard one-point completion of a real Hilbert space. Given any non-trivial proper sub-set U of H one may define the so-called `Apollonian' metric d_U on U. When U \subset V \subset H are nested proper subsets we show that their associated Apollonian metrics satisfy the following uniform contraction principle: Let D=diam_V (U) \in [0,+\infty] be the diameter of the smaller subset…
▽ More
Let H denote the standard one-point completion of a real Hilbert space. Given any non-trivial proper sub-set U of H one may define the so-called `Apollonian' metric d_U on U. When U \subset V \subset H are nested proper subsets we show that their associated Apollonian metrics satisfy the following uniform contraction principle: Let D=diam_V (U) \in [0,+\infty] be the diameter of the smaller subsets with respect to the large. Then for every x,y in U we have d_V(x,y) \leq tanh (D/4) d_U(x,y).
In dimension one, this contraction principle was established by Birkhoff for the Hilbert metric of finite segments on RP^1. In dimension two it was shown by Dubois for subsets of the Riemann sphere. It is new in the generality stated here.
△ Less
Submitted 21 February, 2011;
originally announced February 2011.
-
Complexified cones. Spectral gaps and variational principles
Authors:
Loïc Dubois,
Hans Henrik Rugh
Abstract:
We consider contractions of complexified real cones, as recently introduced by Rugh in [Rugh10]. Dubois [Dub09] gave optimal conditions to determine if a matrix contracts a canonical complex cone. First we generalize his results to the case of complex operators on a Banach space and give precise conditions for the contraction and an improved estimate of the size of the associated spectral gap. We…
▽ More
We consider contractions of complexified real cones, as recently introduced by Rugh in [Rugh10]. Dubois [Dub09] gave optimal conditions to determine if a matrix contracts a canonical complex cone. First we generalize his results to the case of complex operators on a Banach space and give precise conditions for the contraction and an improved estimate of the size of the associated spectral gap. We then prove a variational formula for the leading eigenvalue similar to the Collatz-Wielandt formula for a real cone contraction. Morally, both cases boil down to the study of suitable collections of 2 by 2 matrices and their contraction properties on the Riemann sphere.
△ Less
Submitted 23 November, 2010;
originally announced November 2010.