-
Emergence of wind ripples controlled by mechanics of grain-bed impacts
Authors:
C. W. Lester,
A. B. Murray,
Orencio Duran,
B. Andreotti,
P. Claudin
Abstract:
Periodic sediment patterns have been observed on Earth in riverbeds and sand and snow deserts, but also in other planetary environments. One of the most ubiquitous patterns, familiar wind or 'impact' ripples, adorns sand beaches and arid regions on Earth. The observation of aeolian impact ripples on Mars the same size as their terrestrial counterparts despite a thinner atmosphere raises questions…
▽ More
Periodic sediment patterns have been observed on Earth in riverbeds and sand and snow deserts, but also in other planetary environments. One of the most ubiquitous patterns, familiar wind or 'impact' ripples, adorns sand beaches and arid regions on Earth. The observation of aeolian impact ripples on Mars the same size as their terrestrial counterparts despite a thinner atmosphere raises questions about their formation. Here we show in a numerical simulation that the emergent wavelength of impact ripples is controlled by the mechanics of grain-bed impacts and not the characteristic trajectories of grains above the bed. We find that the distribution of grain trajectories in transport is essentially scale-free, invoking the proximity of a critical point and precluding a transport-related length scale that selects ripple wavelengths. By contrast, when a grain strikes the bed, the process leading to grain ejections introduces a collective granular length scale that determines the scale of the ripples. We propose a theoretical model that predicts a relatively constant ripple size for most planetary conditions. In addition, our model predicts that for high-density atmospheres, such as on Venus, or for sufficiently large sand grains on Earth, impact ripples propagate upwind. Although wind-tunnel and field experiments are needed to confirm the existence of such 'antiripples', we suggest that our quantitative model of wind-blown sediment transport may be used to deduce geological and environmental conditions on other planets from the sizes and propagation speeds of impact ripples.
△ Less
Submitted 30 April, 2025;
originally announced May 2025.
-
Coevolving aerodynamic and impact ripples on Earth
Authors:
Hezi Yizhaq,
Katharina Tholen,
Lior Saban,
Nitzan Swet,
Conner Lester,
Simone Silvestro,
Keld R. Rasmussen,
Jonathan P. Merrison,
Jens J. Iversen,
Gabriele Franzese,
Klaus Kroy,
Thomas Pähtz,
Orencio Durán,
Itzhak Katra
Abstract:
Windblown sand creates multiscale bedforms on Earth, Mars, and other planetary bodies. According to conventional wisdom, decameter-scale dunes and decimeter-scale ripples emerge via distinct mechanisms on Earth: a hydrodynamic instability related to a phase shift between the turbulent flow and the topography, and a granular instability related to a synchronization of hopping grains with the topogr…
▽ More
Windblown sand creates multiscale bedforms on Earth, Mars, and other planetary bodies. According to conventional wisdom, decameter-scale dunes and decimeter-scale ripples emerge via distinct mechanisms on Earth: a hydrodynamic instability related to a phase shift between the turbulent flow and the topography, and a granular instability related to a synchronization of hopping grains with the topography. Here, we report the reproducible creation of coevolving centimeter and decimeter-scale ripples on fine-grained monodisperse sand beds in ambient-air and low-pressure wind-tunnels, revealing two adjacent mesoscale growth instabilities. Their morphological traits and our quantitative grain-scale numerical simulations authenticate the smaller structures as impact ripples but point at a hydrodynamic origin for the larger ones. This suggests that the aeolian transport layer would have to partially respond to the topography on a scale comparable to the average hop length, hence faster than previously thought, but consistent with the phase lag of the inferred aeolian sand flux relative to the wind. Hydrodynamic modelling supports the existence of hydrodynamic aerodynamic ripples on Earth, connecting them mechanistically to megaripples and to the debated Martian ripples. We thereby propose a unified framework for mesoscale granular bedforms found across the Solar System.
△ Less
Submitted 17 January, 2025;
originally announced January 2025.
-
Mixed finite element and TPSA finite volume methods for linearized elasticity and Cosserat materials
Authors:
Jan Martin Nordbotten,
Wietse M. Boon,
Omar Duran,
Eirik Keilegavlen
Abstract:
Cosserat theory of elasticity is a generalization of classical elasticity that allows for asymmetry in the stress tensor by taking into account micropolar rotations in the medium. The equations involve a rotation field and associated "couple stress" as variables, in addition to the conventional displacement and Cauchy stress fields.
In recent work, we derived a mixed finite element method (MFEM)…
▽ More
Cosserat theory of elasticity is a generalization of classical elasticity that allows for asymmetry in the stress tensor by taking into account micropolar rotations in the medium. The equations involve a rotation field and associated "couple stress" as variables, in addition to the conventional displacement and Cauchy stress fields.
In recent work, we derived a mixed finite element method (MFEM) for the linear Cosserat equations that converges optimally in these four variables. The drawback of this method is that it retains the stresses as unknowns, and therefore leads to relatively large saddle point system that are computationally demanding to solve.
As an alternative, we developed a finite volume method in which the stress variables are approximated using a minimal, two-point stencil (TPSA). The system consists of the displacement and rotation variables, with an additional "solid pressure" unknown.
Both the MFEM and TPSA methods are robust in the incompressible limit and in the Cauchy limit, for which the Cosserat equations degenerate to classical linearized elasticity. We report on the construction of the methods, their a priori properties, and compare their numerical performance against an MPSA finite volume method.
△ Less
Submitted 20 September, 2024;
originally announced September 2024.
-
DenoMamba: A fused state-space model for low-dose CT denoising
Authors:
Şaban Öztürk,
Oğuz Can Duran,
Tolga Çukur
Abstract:
Low-dose computed tomography (LDCT) lower potential risks linked to radiation exposure while relying on advanced denoising algorithms to maintain diagnostic quality in reconstructed images. The reigning paradigm in LDCT denoising is based on neural network models that learn data-driven image priors to separate noise evoked by dose reduction from underlying tissue signals. Naturally, the fidelity o…
▽ More
Low-dose computed tomography (LDCT) lower potential risks linked to radiation exposure while relying on advanced denoising algorithms to maintain diagnostic quality in reconstructed images. The reigning paradigm in LDCT denoising is based on neural network models that learn data-driven image priors to separate noise evoked by dose reduction from underlying tissue signals. Naturally, the fidelity of these priors depend on the model's ability to capture the broad range of contextual features evident in CT images. Earlier convolutional neural networks (CNN) are highly adept at efficiently capturing short-range spatial context, but their limited receptive fields reduce sensitivity to interactions over longer distances. Although transformers based on self-attention mechanisms have recently been posed to increase sensitivity to long-range context, they can suffer from suboptimal performance and efficiency due to elevated model complexity, particularly for high-resolution CT images. For high-quality restoration of LDCT images, here we introduce DenoMamba, a novel denoising method based on state-space modeling (SSM), that efficiently captures short- and long-range context in medical images. Following an hourglass architecture with encoder-decoder stages, DenoMamba employs a spatial SSM module to encode spatial context and a novel channel SSM module equipped with a secondary gated convolution network to encode latent features of channel context at each stage. Feature maps from the two modules are then consolidated with low-level input features via a convolution fusion module (CFM). Comprehensive experiments on LDCT datasets with 25\% and 10\% dose reduction demonstrate that DenoMamba outperforms state-of-the-art denoisers with average improvements of 1.4dB PSNR, 1.1% SSIM, and 1.6% RMSE in recovered image quality.
△ Less
Submitted 15 December, 2024; v1 submitted 19 September, 2024;
originally announced September 2024.
-
Rectifying bedload flux variability from channel geometry and grain shape effects
Authors:
Thomas Pähtz,
Yulan Chen,
Jiafeng Xie,
Rémi Monthiller,
Raphaël Maurin,
Katharina Tholen,
Yen-Cheng Lin,
Hao-Che Ho,
Peng Hu,
Zhiguo He,
Orencio Durán
Abstract:
Bedload transport occurs when a bed composed of sedimentary grains becomes mobile in response to the shearing by a flow of liquid. It shapes the landscapes of Earth and other planetary bodies by promoting the formation and growth of various multiscale geological features. Estimating the rate at which such processes take place requires accurate bedload flux predictions. However, even for highly ide…
▽ More
Bedload transport occurs when a bed composed of sedimentary grains becomes mobile in response to the shearing by a flow of liquid. It shapes the landscapes of Earth and other planetary bodies by promoting the formation and growth of various multiscale geological features. Estimating the rate at which such processes take place requires accurate bedload flux predictions. However, even for highly idealized conditions in the laboratory, study-to-study variability of reported bedload flux measurements borders an order of magnitude. This uncertainty stems from physically poorly supported, typically empirical methods to account for channel geometry effects in the determination of the transport-driving bed shear stress and from study-to-study grain shape variations. Here, we derive and validate a universal method of bed shear stress determination and apply it to a number of independent grain-shape-controlled data sets from experiments and CFD-DEM simulations for a very diverse range of transport conditions. An existing physical bedload flux model, here generalized to account for grain shape variability, predicts almost all these data within a factor of 1.3, whereas a recently proposed grain shape correction of the bed shear stress (Deal et al., Nature 613, 298-302, 2023) substantially increases the bedload flux scatter across weak and intense transport conditions.
△ Less
Submitted 22 August, 2024; v1 submitted 11 April, 2024;
originally announced April 2024.
-
Mixed finite element methods for linear Cosserat equations
Authors:
Wietse Marijn Boon,
Omar Duran,
Jan Martin Nordbotten
Abstract:
We consider the equilibrium equations for a linearized Cosserat material and provide two perspectives concerning well-posedness. First, the system can be viewed as the Hodge Laplace problem on a differential complex. On the other hand, we show how the Cosserat materials can be analyzed by inheriting results from linearized elasticity. Both perspectives give rise to mixed finite element methods, wh…
▽ More
We consider the equilibrium equations for a linearized Cosserat material and provide two perspectives concerning well-posedness. First, the system can be viewed as the Hodge Laplace problem on a differential complex. On the other hand, we show how the Cosserat materials can be analyzed by inheriting results from linearized elasticity. Both perspectives give rise to mixed finite element methods, which we refer to as strongly and weakly coupled, respectively. We prove convergence of both classes of methods, with particular attention to improved convergence rate estimates, and stability in the limit of vanishing characteristic length of the micropolar structure. The theoretical results are fully reflected in the actual performance of the methods, as shown by the numerical verifications.
△ Less
Submitted 18 October, 2024; v1 submitted 22 March, 2024;
originally announced March 2024.
-
Scaling laws for planetary sediment transport from DEM-RANS numerical simulations
Authors:
Thomas Pähtz,
Orencio Duŕan
Abstract:
We use an established discrete element method (DEM) Reynolds-averaged Navier--Stokes (RANS)-based numerical model to simulate non-suspended sediment transport across conditions encompassing almost seven orders of magnitude in the particle--fluid density ratio $s$, ranging from subaqueous transport ($s=2.65$) to aeolian transport in the highly rarefied atmosphere of Pluto ($s=10^7$), whereas previo…
▽ More
We use an established discrete element method (DEM) Reynolds-averaged Navier--Stokes (RANS)-based numerical model to simulate non-suspended sediment transport across conditions encompassing almost seven orders of magnitude in the particle--fluid density ratio $s$, ranging from subaqueous transport ($s=2.65$) to aeolian transport in the highly rarefied atmosphere of Pluto ($s=10^7$), whereas previous DEM-based sediment transport studies did not exceed terrestrial aeolian conditions ($s\approx2000$). Guided by these simulations and by experiments, we semi-empirically derive simple scaling laws for the cessation threshold and rate of equilibrium aeolian transport, both exhibiting a rather unusual $s^{1/3}$-dependence. They constitute a simple means to make predictions of aeolian processes across a large range of planetary conditions. The derivation consists of a first-principle-based proof of the statement that, under relatively mild assumptions, the cessation threshold physics is controlled by only one dimensionless control parameter, rather than two expected from dimensional analysis. Crucially, unlike existing models, this proof does not resort to coarse-graining the particle phase of the aeolian transport layer above the bed surface. From the pool of existing models, only that by Pähtz et al. (\textit{J. Geophys. Res. Earth. Surf.}~126, e2020JF005859, 2021) is somewhat consistent with the combined numerical and experimental data. It captures the scaling of the cessation threshold and the $s^{1/3}$-dependence of the transport rate, but fails to capture the latter's superimposed grain size dependence. This hints at a lack of understanding of the transport rate physics and calls for future studies on this issue.
△ Less
Submitted 19 May, 2023; v1 submitted 1 March, 2022;
originally announced March 2022.
-
The physics of sediment transport initiation, cessation, and entrainment across aeolian and fluvial environments
Authors:
Thomas Pähtz,
Abram H. Clark,
Manousos Valyrakis,
Orencio Durán
Abstract:
Predicting the morphodynamics of sedimentary landscapes due to fluvial and aeolian flows requires answering the following questions: Is the flow strong enough to initiate sediment transport, is the flow strong enough to sustain sediment transport once initiated, and how much sediment is transported by the flow in the saturated state (i.e., what is the transport capacity)? In the geomorphological a…
▽ More
Predicting the morphodynamics of sedimentary landscapes due to fluvial and aeolian flows requires answering the following questions: Is the flow strong enough to initiate sediment transport, is the flow strong enough to sustain sediment transport once initiated, and how much sediment is transported by the flow in the saturated state (i.e., what is the transport capacity)? In the geomorphological and related literature, the widespread consensus has been that the initiation, cessation, and capacity of fluvial transport, and the initiation of aeolian transport, are controlled by fluid entrainment of bed sediment caused by flow forces overcoming local resisting forces, whereas aeolian transport cessation and capacity are controlled by impact entrainment caused by the impacts of transported particles with the bed. Here the physics of sediment transport initiation, cessation, and capacity is reviewed with emphasis on recent consensus-challenging developments in sediment transport experiments, two-phase flow modeling, and the incorporation of granular physics' concepts. Highlighted are the similarities between dense granular flows and sediment transport, such as a superslow granular motion known as creeping (which occurs for arbitrarily weak driving flows) and system-spanning force networks that resist bed sediment entrainment; the roles of the magnitude and duration of turbulent fluctuation events in fluid entrainment; the traditionally overlooked role of particle-bed impacts in triggering entrainment events in fluvial transport; and the common physical underpinning of transport thresholds across aeolian and fluvial environments. This sheds a new light on the well-known Shields diagram, where measurements of fluid entrainment thresholds could actually correspond to entrainment-independent cessation thresholds.
△ Less
Submitted 5 March, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
Verification benchmarks for single-phase flow in three-dimensional fractured porous media
Authors:
Inga Berre,
Wietse M. Boon,
Bernd Flemisch,
Alessio Fumagalli,
Dennis Gläser,
Eirik Keilegavlen,
Anna Scotti,
Ivar Stefansson,
Alexandru Tatomir,
Konstantin Brenner,
Samuel Burbulla,
Philippe Devloo,
Omar Duran,
Marco Favino,
Julian Hennicker,
I-Hsien Lee,
Konstantin Lipnikov,
Roland Masson,
Klaus Mosthaf,
Maria Giuseppina Chiara Nestola,
Chuen-Fa Ni,
Kirill Nikitin,
Philipp Schädle,
Daniil Svyatskiy,
Ruslan Yanbarisov
, et al. (1 additional authors not shown)
Abstract:
Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flo…
▽ More
Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flow in three-dimensional fractured porous media. The cases are specifically designed to test the methods' capabilities in handling various complexities common to the geometrical structures of fracture networks. Based on an open call for participation, results obtained with 17 numerical methods were collected. This paper presents the underlying mathematical model, an overview of the features of the participating numerical methods, and their performance in solving the benchmark cases.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Unification of Aeolian and Fluvial Sediment Transport Rate from Granular Physics
Authors:
Thomas Pähtz,
Orencio Durán
Abstract:
One of the physically least understood characteristics of geophysical transport of sediments along sediment surfaces is the well known experimental observation that the sediment transport rate $Q$ is linearly dependent on the fluid shear stress $τ$ applied onto the surface in air, but is nonlinearly dependent on $τ$ in water. Using transport simulations for a wide range of driving conditions, we s…
▽ More
One of the physically least understood characteristics of geophysical transport of sediments along sediment surfaces is the well known experimental observation that the sediment transport rate $Q$ is linearly dependent on the fluid shear stress $τ$ applied onto the surface in air, but is nonlinearly dependent on $τ$ in water. Using transport simulations for a wide range of driving conditions, we show that the scaling depends on the manner in which the kinetic fluctuation energy of transported particles is dissipated: via predominantly fluid drag and quasistatic contacts (linear) versus fluid drag and quasistatic and collisional contacts (nonlinear). We use this finding to derive a scaling law (asymptotically $Q\simτ^2$) in simultaneous agreement with measurements in water and air streams.
△ Less
Submitted 10 March, 2020; v1 submitted 25 November, 2019;
originally announced November 2019.
-
Local Rheology Relation with Variable Yield Stress Ratio across Dry, Wet, Dense, and Dilute Granular Flows
Authors:
Thomas Pähtz,
Orencio Durán,
David N. de Klerk,
Indresan Govender,
Martin Trulsson
Abstract:
Dry, wet, dense, and dilute granular flows have been previously considered fundamentally different and thus described by distinct, and in many cases incompatible, rheologies. We carry out extensive simulations of granular flows, including wet and dry conditions, various geometries and driving mechanisms (boundary driven, fluid driven, and gravity driven), many of which are not captured by standard…
▽ More
Dry, wet, dense, and dilute granular flows have been previously considered fundamentally different and thus described by distinct, and in many cases incompatible, rheologies. We carry out extensive simulations of granular flows, including wet and dry conditions, various geometries and driving mechanisms (boundary driven, fluid driven, and gravity driven), many of which are not captured by standard rheology models. For all simulated conditions, except for fluid-driven and gravity-driven flows close to the flow threshold, we find that the Mohr-Coulomb friction coefficient $μ$ scales with the square root of the local Péclet number $\mathrm{Pe}$ provided that the particle diameter exceeds the particle mean free path. With decreasing $\mathrm{Pe}$ and granular temperature gradient $M$, this general scaling breaks down, leading to a yield condition with a variable yield stress ratio characterized by $M$.
△ Less
Submitted 18 July, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
Dissolution instability and roughening transition
Authors:
P. Claudin,
O. Duran,
B. Andreotti
Abstract:
We theoretically investigate the pattern formation observed when a fluid flows over a solid substrate that can dissolve or melt. We use a turbulent mixing description that includes the effect of the bed roughness. We show that the dissolution instability at the origin of the pattern is associated with an anomaly at the transition from a laminar to a turbulent hydrodynamic response with respect to…
▽ More
We theoretically investigate the pattern formation observed when a fluid flows over a solid substrate that can dissolve or melt. We use a turbulent mixing description that includes the effect of the bed roughness. We show that the dissolution instability at the origin of the pattern is associated with an anomaly at the transition from a laminar to a turbulent hydrodynamic response with respect to the bed elevation. This anomaly, and therefore the instability, disappears when the bed becomes hydrodynamically rough, above a threshold roughness-based Reynolds number. This suggests a possible mechanism for the selection of the pattern amplitude. The most unstable wavelength scales as observed in nature on the thickness of the viscous sublayer, with a multiplicative factor that depends on the dimensionless parameters of the problem.
△ Less
Submitted 28 October, 2017;
originally announced October 2017.
-
Universal friction law at granular solid-gas transition explains scaling of sediment transport load with excess fluid shear stress
Authors:
Thomas Pähtz,
Orencio Durán
Abstract:
A key interest in geomorphology is to predict how the shear stress $τ$ exerted by a turbulent flow of air or liquid onto an erodible sediment bed affects the transport load $M\tilde g$ (i.e., the submerged weight of transported nonsuspended sediment per unit area) and its average velocity when exceeding the sediment transport threshold $τ_t$. Most transport rate predictions in the literature are b…
▽ More
A key interest in geomorphology is to predict how the shear stress $τ$ exerted by a turbulent flow of air or liquid onto an erodible sediment bed affects the transport load $M\tilde g$ (i.e., the submerged weight of transported nonsuspended sediment per unit area) and its average velocity when exceeding the sediment transport threshold $τ_t$. Most transport rate predictions in the literature are based on the scaling $M\tilde g\proptoτ-τ_t$, the physical origin of which, however, has remained controversial. Here we test the universality and study the origin of this scaling law using particle-scale simulations of nonsuspended sediment transport driven by a large range of Newtonian fluids. We find that the scaling coefficient is a universal approximate constant and can be understood as an inverse granular friction coefficient (i.e., the ratio between granular shear stress and normal-bed pressure) evaluated at the base of the transport layer (i.e., the effective elevation of energetic particle-bed rebounds). Usually, the granular flow at this base is gaslike and rapidly turns into the solidlike granular bed underneath: a liquidlike regime does not necessarily exist, which is accentuated by a nonlocal granular flow rheology in both the transport layer and bed. Hence, this transition fundamentally differs from the solid-liquid transition (i.e., yielding) in dense granular flows even though both transitions are described by a friction law. Combining this result with recent insights into the nature of $τ_t$, we conclude that the transport load scaling is a signature of a steady rebound state and unrelated to entrainment of bed sediment.
△ Less
Submitted 11 October, 2018; v1 submitted 19 September, 2016;
originally announced September 2016.
-
Fluid forces or impacts: What governs the entrainment of soil particles in sediment transport mediated by a Newtonian fluid?
Authors:
Thomas Pähtz,
Orencio Durán
Abstract:
In steady sediment transport, sediment deposition is balanced by entrainment of bed particles by fluid forces or particle-bed impacts. Here we propose a proxy to determine the role of impact entrainment relative to entrainment by the mean turbulent flow: the "bed velocity" $V_b$, which is an effective near-bed-surface value of the average horizontal particle velocity that generalizes the classical…
▽ More
In steady sediment transport, sediment deposition is balanced by entrainment of bed particles by fluid forces or particle-bed impacts. Here we propose a proxy to determine the role of impact entrainment relative to entrainment by the mean turbulent flow: the "bed velocity" $V_b$, which is an effective near-bed-surface value of the average horizontal particle velocity that generalizes the classical slip velocity, used in studies of aeolian saltation transport, to sediment transport in an arbitrary Newtonian fluid. We study $V_b$ for a wide range of the particle-fluid-density ratio $s$, Galileo number $\mathrm{Ga}$, and Shields number $Θ$ using direct sediment transport simulations. We find that transport is fully sustained through impact entrainment (i.e., $V_b$ is constant in natural units) when the "impact number" $\mathrm{Im}=\mathrm{Ga}\sqrt{s+0.5}\gtrsim20$ or $Θ\gtrsim5/\mathrm{Im}$. These conditions are obeyed for the vast majority of transport regimes, including steady turbulent bedload, which has long been thought to be sustained solely through fluid entrainment. In fact, we find that transport is fully sustained through fluid entrainment (i.e., $V_b$ scales with the near-bed horizontal fluid velocity) only for sufficiently viscous bedload transport at grain scale (i.e., for $\mathrm{Im}\lesssim20$ and $Θ\lesssim1/\mathrm{Im}$). Finally, we do not find a strong correlation between, $V_b$, or the classical slip velocity, and the transport-layer-averaged horizontal particle velocity $\overline{v_x}$, which challenges the long-standing consensus that predominant impact entrainment is responsible for a linear scaling of the transport rate with $Θ$. For turbulent bedload in particular, $\overline{v_x}$ increases with $Θ$ despite $V_b$ remaining constant, which we propose is linked to the formation of a liquid-like bed on top of the static-bed surface.
△ Less
Submitted 19 July, 2017; v1 submitted 24 May, 2016;
originally announced May 2016.
-
The Cessation Threshold of Nonsuspended Sediment Transport Across Aeolian and Fluvial Environments
Authors:
Thomas Pähtz,
Orencio Durán
Abstract:
Using particle-scale simulations of non-suspended sediment transport for a large range of Newtonian fluids driving transport, including air and water, we determine the bulk transport cessation threshold $Θ^r_t$ by extrapolating the transport load as a function of the dimensionless fluid shear stress (`Shields number') $Θ$ to the vanishing transport limit. In this limit, the simulated steady states…
▽ More
Using particle-scale simulations of non-suspended sediment transport for a large range of Newtonian fluids driving transport, including air and water, we determine the bulk transport cessation threshold $Θ^r_t$ by extrapolating the transport load as a function of the dimensionless fluid shear stress (`Shields number') $Θ$ to the vanishing transport limit. In this limit, the simulated steady states of continuous transport can be described by simple analytical model equations relating the average transport layer properties to the law of the wall flow velocity profile. We use this model to calculate $Θ^r_t$ for arbitrary environments and derive a general Shields-like threshold diagram in which a Stokes-like number replaces the particle Reynolds number. Despite the simplicity of our hydrodynamic description, the predicted cessation threshold, both from the simulations and analytical model, quantitatively agrees with measurements for transport in air and viscous and turbulent liquids despite not being fitted to these measurements. We interpret the analytical model as a description of a continuous rebound motion of transported particles and thus $Θ^r_t$ as the minimal fluid shear stress needed to compensate the average energy loss of transported particles during an average rebound at the bed surface. This interpretation, supported by simulations near $Θ^r_t$, implies that entrainment mechanisms are needed to sustain transport above $Θ^r_t$. While entrainment by turbulent events sustains intermittent transport, entrainment by particle-bed impacts sustains continuous transport. Combining our interpretations with the critical energy criterion for incipient motion by Valyrakis and coworkers, we put forward a new conceptual picture of sediment transport intermittency.
△ Less
Submitted 30 July, 2018; v1 submitted 23 February, 2016;
originally announced February 2016.
-
Mathematical modeling and numerical simulation of a bioreactor landfill using Feel++
Authors:
Guillaume Dollé,
Omar Duran,
Nelson Feyeux,
Emmanuel Frénod,
Matteo Giacomini,
Christophe Prud'homme
Abstract:
In this paper, we propose a mathematical model to describe the functioning of a bioreactor landfill, that is a waste management facility in which biodegradable waste is used to generate methane. The simulation of a bioreactor landfill is a very complex multiphysics problem in which bacteria catalyze a chemical reaction that starting from organic carbon leads to the production of methane, carbon di…
▽ More
In this paper, we propose a mathematical model to describe the functioning of a bioreactor landfill, that is a waste management facility in which biodegradable waste is used to generate methane. The simulation of a bioreactor landfill is a very complex multiphysics problem in which bacteria catalyze a chemical reaction that starting from organic carbon leads to the production of methane, carbon dioxide and water. The resulting model features a heat equation coupled with a non-linear reaction equation describing the chemical phenomena under analysis and several advection and advection-diffusion equations modeling multiphase flows inside a porous environment representing the biodegradable waste. A framework for the approximation of the model is implemented using Feel++, a C++ open-source library to solve Partial Differential Equations. Some heuristic considerations on the quantitative values of the parameters in the model are discussed and preliminary numerical simulations are presented.
△ Less
Submitted 19 November, 2016; v1 submitted 21 January, 2016;
originally announced January 2016.
-
The fluctuation energy balance in non-suspended fluid-mediated particle transport
Authors:
Thomas Pähtz,
Orencio Durán,
Tuan-Duc Ho,
Alexandre Valance,
Jasper F. Kok
Abstract:
Here we compare two extreme regimes of non-suspended fluid-mediated particle transport, transport in light and heavy fluids ("saltation" and "bedload", respectively), regarding their particle fluctuation energy balance. From direct numerical simulations, we surprisingly find that the ratio between collisional and fluid drag dissipation of fluctuation energy is significantly larger in saltation tha…
▽ More
Here we compare two extreme regimes of non-suspended fluid-mediated particle transport, transport in light and heavy fluids ("saltation" and "bedload", respectively), regarding their particle fluctuation energy balance. From direct numerical simulations, we surprisingly find that the ratio between collisional and fluid drag dissipation of fluctuation energy is significantly larger in saltation than in bedload, even though the contribution of interparticle collisions to transport of momentum and energy is much smaller in saltation due to the low concentration of particles in the transport layer. We conclude that the much higher frequency of high-energy particle-bed impacts ("splash") in saltation is the cause for this counter-intuitive behavior. Moreover, from a comparison of these simulations to Particle Tracking Velocimetry measurements which we performed in a wind tunnel under steady transport of fine and coarse sand, we find that turbulent fluctuations of the flow produce particle fluctuation energy at an unexpectedly high rate in saltation even under conditions for which the effects of turbulence are usually believed to be small.
△ Less
Submitted 16 January, 2015;
originally announced January 2015.
-
Direct numerical simulations of aeolian sand ripples
Authors:
Orencio Duran,
Philippe Claudin,
Bruno Andreotti
Abstract:
Aeolian sand beds exhibit regular patterns of ripples resulting from the interaction between topography and sediment transport. Their characteristics have been so far related to reptation transport caused by the impacts on the ground of grains entrained by the wind into saltation. By means of direct numerical simulations of grains interacting with a wind flow, we show that the instability turns ou…
▽ More
Aeolian sand beds exhibit regular patterns of ripples resulting from the interaction between topography and sediment transport. Their characteristics have been so far related to reptation transport caused by the impacts on the ground of grains entrained by the wind into saltation. By means of direct numerical simulations of grains interacting with a wind flow, we show that the instability turns out to be driven by resonant grain trajectories, whose length is close to a ripple wavelength and whose splash leads to a mass displacement towards the ripple crests. The pattern selection results from a compromise between this destabilizing mechanism and a diffusive downslope transport which stabilizes small wavelengths. The initial wavelength is set by the ratio of the sediment flux and the erosion/deposition rate, a ratio which increases linearly with the wind velocity. We show that this scaling law, in agreement with experiments, originates from an interfacial layer separating the saltation zone from the static sand bed, where momentum transfers are dominated by mid-air collisions. Finally, we provide quantitative support for the use the propagation of these ripples as a proxy for remote measurements of sediment transport.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
-
Origins of barchan dune asymmetry: insights from numerical simulations
Authors:
Eric J. R. Parteli,
Orencio Durán,
Mary C. Bourke,
Haim Tsoar,
Thorsten Poeschel,
Hans J. Herrmann
Abstract:
Barchan dunes --- crescent-shaped dunes that form in areas of unidirectional winds and low sand availability --- commonly display an asymmetric shape, with one limb extended downwind. Several factors have been identified as potential causes for barchan dune asymmetry on Earth and Mars: asymmetric bimodal wind regime, topography, influx asymmetry and dune collision. However, the dynamics and potent…
▽ More
Barchan dunes --- crescent-shaped dunes that form in areas of unidirectional winds and low sand availability --- commonly display an asymmetric shape, with one limb extended downwind. Several factors have been identified as potential causes for barchan dune asymmetry on Earth and Mars: asymmetric bimodal wind regime, topography, influx asymmetry and dune collision. However, the dynamics and potential range of barchan morphologies emerging under each specific scenario that leads to dune asymmetry are far from being understood. In the present work, we use dune modeling in order to investigate the formation and evolution of asymmetric barchans. We find that a bimodal wind regime causes limb extension when the divergence angle between primary and secondary winds is larger than $90^{\circ}$, whereas the extended limb evolves into a seif dune if the ratio between secondary and primary transport rates is larger than 25%. Calculations of dune formation on an inclined surface under constant wind direction also lead to barchan asymmetry, however no seif dune is obtained from surface tilting alone. Asymmetric barchans migrating along a tilted surface move laterally, with transverse migration velocity proportional to the slope of the terrain. Limb elongation induced by topography can occur when a barchan crosses a topographic rise. Furthermore, transient asymmetric barchan shapes with extended limb also emerge during collisions between dunes or due to an asymmetric influx. Our findings can be useful for making quantitative inference on local wind regimes or spatial heterogeneities in transport conditions of planetary dune fields hosting asymmetric barchans.
△ Less
Submitted 2 December, 2013; v1 submitted 24 April, 2013;
originally announced April 2013.
-
Numerical simulation of turbulent sediment transport, from bed load to saltation
Authors:
Orencio Duran,
Bruno Andreotti,
Philippe Claudin
Abstract:
Sediment transport is studied as a function of the grain to fluid density ratio using two phase numerical sim- ulations based on a discrete element method (DEM) for particles coupled to a continuum Reynolds averaged description of hydrodynamics. At a density ratio close to unity (typically under water), vertical velocities are so small that sediment transport occurs in a thin layer at the surface…
▽ More
Sediment transport is studied as a function of the grain to fluid density ratio using two phase numerical sim- ulations based on a discrete element method (DEM) for particles coupled to a continuum Reynolds averaged description of hydrodynamics. At a density ratio close to unity (typically under water), vertical velocities are so small that sediment transport occurs in a thin layer at the surface of the static bed, and is called bed load. Steady, or 'saturated' transport is reached when the fluid borne shear stress at the interface between the mobile grains and the static grains is reduced to its threshold value. The number of grains transported per unit surface is therefore limited by the flux of horizontal momentum towards the surface. However, the fluid velocity in the transport layer remains almost undisturbed so that the mean grain velocity scales with the shear velocity u\ast. At large density ratio (typically in air), the vertical velocities are large enough to make the transport layer wide and dilute. Sediment transport is then called saltation. In this case, particles are able to eject others when they collide with the granular bed, a process called splash. The number of grains transported per unit surface is selected by the balance between erosion and deposition and saturation is reached when one grain is statistically replaced by exactly one grain after a collision, which has the consequence that the mean grain velocity remains independent of u\ast. The influence of the density ratio is systematically studied to reveal the transition between these two transport regimes. Based on the mechanisms identified in the steady case, we discuss the transient of saturation of sediment transport and in particular the saturation time and length. Finally, we investigate the exchange of particles between the mobile and static phases and we determine the exchange time of particles.
△ Less
Submitted 29 May, 2012; v1 submitted 29 November, 2011;
originally announced November 2011.
-
Parabolic dunes in north-eastern Brazil
Authors:
O. Duran,
M. V. N. Silva,
L. J. C. Bezerra,
H. J. Herrmann,
L. P. Maia
Abstract:
In this work we present measurements of vegetation cover over parabolic dunes with different degree of activation along the north-eastern Brazilian coast. We are able to extend the local values of the vegetation cover density to the whole dune by correlating measurements with the gray-scale levels of a high resolution satellite image of the dune field. The empirical vegetation distribution is fi…
▽ More
In this work we present measurements of vegetation cover over parabolic dunes with different degree of activation along the north-eastern Brazilian coast. We are able to extend the local values of the vegetation cover density to the whole dune by correlating measurements with the gray-scale levels of a high resolution satellite image of the dune field. The empirical vegetation distribution is finally used to validate the results of a recent continuous model of dune motion coupling sand erosion and vegetation growth.
△ Less
Submitted 31 August, 2007;
originally announced August 2007.
-
Reply to "Comment on `Minimal size of a barchan dune' "
Authors:
E. J. R. Parteli,
O. Durán,
H. J. Herrmann
Abstract:
We reply to the comment by Andreotti and Claudin (submitted to Phys. Rev. E, arXiv:0705.3525) on our paper ``Minimal Size of a Barchan Dune'' [Phys. Rev. E {\bf{75,}} 011301 (2007)]. We show that the equations of the dune model used in our calculations are self-consistent and effectively lead to a dependence of the minimal dune size on the wind speed through the saturation length. Furthermore, w…
▽ More
We reply to the comment by Andreotti and Claudin (submitted to Phys. Rev. E, arXiv:0705.3525) on our paper ``Minimal Size of a Barchan Dune'' [Phys. Rev. E {\bf{75,}} 011301 (2007)]. We show that the equations of the dune model used in our calculations are self-consistent and effectively lead to a dependence of the minimal dune size on the wind speed through the saturation length. Furthermore, we show that Meridiani Planum ripples are probably not a good reference to estimate the grain size of Martian dune sands: the soil in the ripple troughs at the landing site is covered with nonerodible elements (``blueberries''), which increase the minimal threshold for saltation by a factor of 2.0. We conclude that, in the absence of large fragments as the ones found at the landing site, basaltic grains of diameter $d=500 \pm 100 μ$m that compose the large, typical dark Martian dunes [K. S. Edgett and P. R. Christensen, J. Geophys. Res. {\bf{96,}} 22765 (1991)] probably saltate during the strongest storms on Mars. We also show that the wind friction speed $u_{\ast} \approx 3.0$ m/s that we found from the calculations of Martian dunes is within the values of maximum wind speeds that occur during Martian storms a few times a decade [R. E. Arvidson {\em{et al.}}, Science {\bf{222,}} 463 (1983); H. J. Moore, J. Geophys. Res. {\bf{90,}} 163 (1985); R. Sullivan {\em{et al.}}, Nature {\bf{436,}} 58 (2005); D. J. Jerolmack {\em{et al.}}, J. Geophys. Res. {\bf{111,}} E12S02 (2006)]. In this manner, the dune model predicts that Martian dunes can be formed under present Martian conditions, with no need to assume other conditions of wind and atmosphere that could have prevailed in the past.
△ Less
Submitted 9 August, 2007;
originally announced August 2007.
-
Minimal size of a barchan dune
Authors:
Eric J. R. Parteli,
Orencio Duran,
Hans J. Herrmann
Abstract:
Barchans are dunes of high mobility which have a crescent shape and propagate under conditions of unidirectional wind. However, sand dunes only appear above a critical size, which scales with the saturation distance of the sand flux [P. Hersen, S. Douady, and B. Andreotti, Phys. Rev. Lett. {\bf{89,}} 264301 (2002); B. Andreotti, P. Claudin, and S. Douady, Eur. Phys. J. B {\bf{28,}} 321 (2002); G…
▽ More
Barchans are dunes of high mobility which have a crescent shape and propagate under conditions of unidirectional wind. However, sand dunes only appear above a critical size, which scales with the saturation distance of the sand flux [P. Hersen, S. Douady, and B. Andreotti, Phys. Rev. Lett. {\bf{89,}} 264301 (2002); B. Andreotti, P. Claudin, and S. Douady, Eur. Phys. J. B {\bf{28,}} 321 (2002); G. Sauermann, K. Kroy, and H. J. Herrmann, Phys. Rev. E {\bf{64,}} 31305 (2001)]. It has been suggested by P. Hersen, S. Douady, and B. Andreotti, Phys. Rev. Lett. {\bf{89,}} 264301 (2002) that this flux fetch distance is itself constant. Indeed, this could not explain the proto size of barchan dunes, which often occur in coastal areas of high litoral drift, and the scale of dunes on Mars. In the present work, we show from three dimensional calculations of sand transport that the size and the shape of the minimal barchan dune depend on the wind friction speed and the sand flux on the area between dunes in a field. Our results explain the common appearance of barchans a few tens of centimeter high which are observed along coasts. Furthermore, we find that the rate at which grains enter saltation on Mars is one order of magnitude higher than on Earth, and is relevant to correctly obtain the minimal dune size on Mars.
△ Less
Submitted 14 May, 2007;
originally announced May 2007.
-
Size distribution and structure of Barchan dune fields
Authors:
Orencio Durán,
Veit Schwämmle,
Pedro G. Lind,
Hans J. Herrmann
Abstract:
Barchans are isolated mobile dunes often organized in large dune fields. Dune fields seem to present a characteristic dune size and spacing, which suggests a cooperative behavior based on dune interaction. In Duran et al. (2009), we propose that the redistribution of sand by collisions between dunes is a key element for the stability and size selection of barchan dune fields. This approach was bas…
▽ More
Barchans are isolated mobile dunes often organized in large dune fields. Dune fields seem to present a characteristic dune size and spacing, which suggests a cooperative behavior based on dune interaction. In Duran et al. (2009), we propose that the redistribution of sand by collisions between dunes is a key element for the stability and size selection of barchan dune fields. This approach was based on a mean-field model ignoring the spatial distribution of dune fields. Here, we present a simplified dune field model that includes the spatial evolution of individual dunes as well as their interaction through sand exchange and binary collisions. As a result, the dune field evolves towards a steady state that depends on the boundary conditions. Comparing our results with measurements of Moroccan dune fields, we find that the simulated fields have the same dune size distribution as in real fields but fail to reproduce their homogeneity along the wind direction.
△ Less
Submitted 19 May, 2011; v1 submitted 16 January, 2007;
originally announced January 2007.
-
The dune size distribution and scaling relations of barchan dune fields
Authors:
Orencio Durán,
Veit Schwämmle,
Pedro G. Lind,
Hans J. Herrmann
Abstract:
Barchan dunes emerge as a collective phenomena involving the generation of thousands of them in so called barchan dune fields. By measuring the size and position of dunes in Moroccan barchan dune fields, we find that these dunes tend to distribute uniformly in space and follow an unique size distribution function. We introduce an analyticalmean-field approach to show that this empirical size dis…
▽ More
Barchan dunes emerge as a collective phenomena involving the generation of thousands of them in so called barchan dune fields. By measuring the size and position of dunes in Moroccan barchan dune fields, we find that these dunes tend to distribute uniformly in space and follow an unique size distribution function. We introduce an analyticalmean-field approach to show that this empirical size distribution emerges from the interplay of dune collisions and sand flux balance, the two simplest mechanisms for size selection. The analytical model also predicts a scaling relation between the fundamental macroscopic properties characterizing a dune field, namely the inter-dune spacing and the first and second moments of the dune size distribution.
△ Less
Submitted 27 October, 2008; v1 submitted 16 January, 2007;
originally announced January 2007.
-
Vegetation against dune mobility
Authors:
Orencio Duran,
Hans J. Herrmann
Abstract:
Vegetation is the most common and most reliable stabilizer of loose soil or sand. This ancient technique is for the first time cast into a set of equations of motion describing the competition between aeolian sand transport and vegetation growth. Our set of equations is then applied to study quantitatively the transition between barchans and parabolic dunes driven by the dimensionless fixation i…
▽ More
Vegetation is the most common and most reliable stabilizer of loose soil or sand. This ancient technique is for the first time cast into a set of equations of motion describing the competition between aeolian sand transport and vegetation growth. Our set of equations is then applied to study quantitatively the transition between barchans and parabolic dunes driven by the dimensionless fixation index $θ$ which is the ratio between dune characteristic erosion rate and vegetation growth velocity. We find a fixation index $θ_c$ below which the dunes are stabilized characterized by scaling laws.
△ Less
Submitted 12 September, 2006;
originally announced September 2006.
-
Transformation of Barchans into parabolic dunes under the influence of vegetation
Authors:
O. Duran,
V. Schatz,
H. J. Herrmann,
H. Tsoar
Abstract:
Barchan dunes were found to transform into parabolic dunes and vice versa when the amount of vegetation on and around them changes. This work presents the first numerical simulation of this effect. We propose a continuum model for the density of vegetation. An established sand transport model is used for simulating the evolution of the dunes.
Barchan dunes were found to transform into parabolic dunes and vice versa when the amount of vegetation on and around them changes. This work presents the first numerical simulation of this effect. We propose a continuum model for the density of vegetation. An established sand transport model is used for simulating the evolution of the dunes.
△ Less
Submitted 25 April, 2005;
originally announced April 2005.
-
Breeding and Solitary Wave Behavior of Dunes
Authors:
O. Duran,
V. Schwaemmle,
H. Herrmann
Abstract:
Beautiful dune patterns can be found in deserts and along coasts due to the instability of a plain sheet of sand under the action of the wind. Barchan dunes are highly mobile aeolian dunes found in areas of low sand availability and unidirectional wind fields. Up to now modelization mainly focussed on single dunes or dune patterns without regarding the mechanisms of dune interactions. We study t…
▽ More
Beautiful dune patterns can be found in deserts and along coasts due to the instability of a plain sheet of sand under the action of the wind. Barchan dunes are highly mobile aeolian dunes found in areas of low sand availability and unidirectional wind fields. Up to now modelization mainly focussed on single dunes or dune patterns without regarding the mechanisms of dune interactions. We study the case when a small dune bumps into a bigger one. Recently Schwammle et al. and Katsuki et al. have shown that under certain circumstances dunes can behave like solitary waves. This means that they can ``cross'' each other which has been questioned by many researchers before. In other cases we observe coalescence, i.e. both dune merge into one, breeding, i.e. the creation of three baby dunes at the center and horns of a Barchan, or budding, i.e. the small dune, after ``crossing'' the big one, is unstable and splits into two new dunes.
△ Less
Submitted 25 April, 2005; v1 submitted 17 June, 2004;
originally announced June 2004.
-
Evolutionary Prisoner's Dilemma in Random Graphs
Authors:
O. Durán,
R. Mulet
Abstract:
We study an evolutionary version of the spatial prisoner's dilemma game, where the agents are placed in a random graph. For lattices with fixed connectivity, $α$, we show that for low values of $α$ the final density of cooperating agents depends on the initial conditions, while it does not depend for high connectivity lattices. We fully characterized the phase diagram of the system, using both,…
▽ More
We study an evolutionary version of the spatial prisoner's dilemma game, where the agents are placed in a random graph. For lattices with fixed connectivity, $α$, we show that for low values of $α$ the final density of cooperating agents depends on the initial conditions, while it does not depend for high connectivity lattices. We fully characterized the phase diagram of the system, using both, extensive numerical simulations and analytical computations. It is shown that two different behaviors are well defined: a Nash equilibrium one, where the density of cooperating agents $ρ_c$ is fixed, and a non-stationary one, where $ρ_c$ fluctuates in time. Moreover we study lattices with fluctuating connectivities and find that the phase diagram previously developed looses its meaning. In fact, multiple transitions appear and only one regime may be defined. This regime is completely characterized by a non stationary state where the density of cooperating agents varies in time.
△ Less
Submitted 21 May, 2003; v1 submitted 15 May, 2003;
originally announced May 2003.
