-
Compact, all-PM fiber integrated and alignment-free ultrafast Yb:fiber NALM laser with sub-femtosecond timing jitter
Authors:
Yuxuan Ma,
Sarper H. Salman,
Chen Li,
Christoph Mahnke,
Yi Hua,
Stefan Droste,
Jakob Fellinger,
Aline S. Mayer,
Oliver H. Heckl,
Christoph M. Heyl,
Ingmar Hartl
Abstract:
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design paramet…
▽ More
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design parameters were determined by numerically simulating the pulse evolution in the oscillator and by analyzing their impact on the laser performance. Experimentally, we achieved an 88 fs compressed pulse duration with sub-fs timing jitter at 54 MHz repetition rate and 51 mW of output power with 5.5 * 10-5 [20 Hz, 1 MHz] integrated relative intensity noise (RIN). Furthermore, we demonstrate tight phase-locking of the laser's carrier-envelope offset frequency (fceo) to a stable radio frequency (RF) reference and of one frequency comb tooth to a stable optical reference at 291 THz.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Flexible all-PM NALM Yb:fiber laser design for frequency comb applications: operation regimes and their noise properties
Authors:
Aline S. Mayer,
Wilfrid Grosinger,
Jakob Fellinger,
Georg Winkler,
Lukas W. Perner,
Stefan Droste,
Sarper H. Salman,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a…
▽ More
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps$^2$) to normal (+0.015 ps$^2$). We put a particular focus on the characterization of the intensity noise as well as the free-running linewidth of the carrier-envelope-offset (CEO) frequency as a function of the different operation regimes. We observe that operation points far from the spontaneous emission peak of Yb (~1030 nm) and close to zero intracavity dispersion can be found, where the influence of pump noise is strongly suppressed. For such an operation point, we show that a CEO linewidth of less than 10-kHz at 1 s integration can be obtained without any active stabilization.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Carrier-envelope phase stabilization of an Er:Yb:glass laser via feed-forward technique
Authors:
Randy Lemons,
Wei Liu,
Irene Fernandez De Fuentes,
Stefan Droste,
GÜnter Steinmeyer,
Charles G. Durfee,
Sergio Carbajo
Abstract:
Few-cycle pulsed laser technology highlights the need for control and stabilization of the carrier-envelope phase (CEP) for applications requiring shot-to-shot timing and phase consistency. This general requirement has been achieved successfully in a number of free space and fiber lasers via feedback and feed-forward methods. Expanding upon existing results, we demonstrate CEP stabilization throug…
▽ More
Few-cycle pulsed laser technology highlights the need for control and stabilization of the carrier-envelope phase (CEP) for applications requiring shot-to-shot timing and phase consistency. This general requirement has been achieved successfully in a number of free space and fiber lasers via feedback and feed-forward methods. Expanding upon existing results, we demonstrate CEP stabilization through the feed-forward method applied to a SESAM mode-locked Er:Yb:glass laser at 1.55 um with a measured ultralow timing jitter of 2.9 as (1 Hz - 3 MHz) and long-term stabilization over a duration of eight hours. Single-digit attosecond stabilization at telecom wavelengths opens a new direction in applications requiring ultra-stable frequency and time precision such as high-resolution spectroscopy and fiber timing networks.
△ Less
Submitted 1 October, 2020; v1 submitted 22 August, 2019;
originally announced August 2019.
-
Tunable dual-comb from an all-polarization-maintaining single-cavity dual-color Yb:fiber laser
Authors:
Jakob Fellinger,
Aline S. Mayer,
Georg Winkler,
Wilfrid Grosinger,
Gar-Wing Truong,
Stefan Droste,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions…
▽ More
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatially overlapping the two arms on a simple photodiode then generates a down-converted radio frequency comb. The difference in repetition rates between the two pulse trains and hence the line spacing of the down-converted comb can easily be tuned in this setup. This feature allows for a flexible adjustment of the tradeoff between non-aliasing bandwidth vs. measurement time in spectroscopy applications. Furthermore, we show that by fine-tuning the center-wavelengths of the two pulse trains, we are able to shift the down-converted frequency comb along the radio-frequency axis. The usability of this dual-comb setup is demonstrated by measuring the transmission of two different etalons while the laser is completely free-running.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Self-referenced frequency combs using high-efficiency silicon-nitride waveguides
Authors:
David R. Carlson,
Daniel D. Hickstein,
Alex Lind,
Stefan Droste,
Daron Westly,
Nima Nader,
Ian Coddington,
Nathan R. Newbury,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octave…
▽ More
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
Authors:
Daniel D. Hickstein,
Hojoong Jung,
David R. Carlson,
Alex Lind,
Ian Coddington,
Kartik Srinivasan,
Gabriel G. Ycas,
Daniel C. Cole,
Abijith Kowligy,
Connor Fredrick,
Stefan Droste,
Erin S. Lamb,
Nathan R. Newbury,
Hong X. Tang,
Scott A. Diddams,
Scott B. Papp
Abstract:
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercon…
▽ More
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercontinuum generation, difference-frequency generation, second-harmonic generation, and third-harmonic generation. As one application of integrating multiple nonlinear processes, we measure and stabilize the carrier-envelope-offset frequency of a laser comb by direct photodetection of the output light. Additionally, we generate ~0.3 mW in the 3000 nm to 4000 nm region, which is potentially useful for molecular spectroscopy. The combination of broadband light generation from the visible through the mid-infrared, combined with simplified self-referencing, provides a path towards robust comb systems for spectroscopy and metrology in the field.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Characterization of a 450-km Baseline GPS Carrier-Phase Link using an Optical Fiber Link
Authors:
Stefan Droste,
Christian Grebing,
Julia Leute,
Sebastian M. F. Raupach,
Arthur Matveev,
Theodor W. Hänsch,
Andreas Bauch,
Ronald Holzwarth,
Gesine Grosche
Abstract:
A GPS carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two act…
▽ More
A GPS carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two active hydrogen masers operated at both institutes. The masers serve as local oscillators and cancel out when the double differences are calculated, such that they do not constitute a limitation for the GPS link characterization. We achieve a frequency instability of 3 x 10^(-13) in 30 s and 5 x 10^(-16) for long averaging times. Frequency comparison results obtained via both links show no deviation larger than the statistical uncertainty of 6 x 10^(-16). These results can be interpreted as a successful cross-check of the measurement uncertainty of a truly remote end fiber link.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Finite-frequency noise in a quantum dot with normal and superconducting leads
Authors:
Stephanie Droste,
Janine Splettstoesser,
Michele Governale
Abstract:
We consider a single-level quantum dot tunnel-coupled to one normal and one superconducting lead. We employ a diagrammatic real-time approach to calculate the finite-frequency current noise for subgap transport. The noise spectrum gives direct access to the internal dynamics of the dot. In particular the noise spectrum shows sharp dips at the frequency of the coherent oscillations of Cooper pairs…
▽ More
We consider a single-level quantum dot tunnel-coupled to one normal and one superconducting lead. We employ a diagrammatic real-time approach to calculate the finite-frequency current noise for subgap transport. The noise spectrum gives direct access to the internal dynamics of the dot. In particular the noise spectrum shows sharp dips at the frequency of the coherent oscillations of Cooper pairs between dot and superconductor. This feature is most pronounced when the superconducting correlation is maximal. Furthermore, in the quantum-noise regime, $ω> k_\text{B}T,μ_\text{N}$, the noise spectrum exhibits steps at frequencies equal to the Andreev addition energies. The height of these steps is related to the effective coupling strength of the excitations. The finite-frequency noise spectrum hence provides a full spectroscopy of the system.
△ Less
Submitted 13 April, 2015; v1 submitted 24 October, 2014;
originally announced October 2014.
-
Josephson current through interacting double quantum dots with spin-orbit coupling
Authors:
Stephanie Droste,
Sabine Andergassen,
Janine Splettstoesser
Abstract:
We study the effect of Rashba spin-orbit interaction on the Josephson current through a double quantum dot in presence of Coulomb repulsion. In particular, we describe the characteristic effects on the magnetic-field induced singlet-triplet transition in the molecular regime. Exploring the whole parameter space, we analyze the effects of the device asymmetry, the orientation of the applied magneti…
▽ More
We study the effect of Rashba spin-orbit interaction on the Josephson current through a double quantum dot in presence of Coulomb repulsion. In particular, we describe the characteristic effects on the magnetic-field induced singlet-triplet transition in the molecular regime. Exploring the whole parameter space, we analyze the effects of the device asymmetry, the orientation of the applied magnetic field with respect to the spin-orbit interaction, and finite temperatures. We find that at finite temperatures the orthogonal component of the spin-orbit interaction exhibits a similar effect as the Coulomb interaction inducing the occurrence of a π-phase at particle-hole symmetry. This provides a new route to the experimental observability of the π-phase in multi-level quantum dots.
△ Less
Submitted 25 September, 2012; v1 submitted 7 May, 2012;
originally announced May 2012.
