-
Experimental and Numerical Study of Acoustic Streaming in Mid-Air Phased Arrays
Authors:
Christopher Stone,
Yusuke Koroyasu,
Yoichi Ochiai,
Akiko Kaneko,
Bruce W. Drinkwater,
Tatsuki Fushimi
Abstract:
Mid-air acoustic streaming, where ultrasound induces steady fluid motion, could significantly affect the perception of haptic sensations, stability of levitation systems, and enable controlled transfer of odours (smells) through air by directing volatile compounds to specific locations. Despite its importance, the streaming behavior in airborne phased-array transducers remains poorly understood. H…
▽ More
Mid-air acoustic streaming, where ultrasound induces steady fluid motion, could significantly affect the perception of haptic sensations, stability of levitation systems, and enable controlled transfer of odours (smells) through air by directing volatile compounds to specific locations. Despite its importance, the streaming behavior in airborne phased-array transducers remains poorly understood. Here, we use particle image velocimetry and numerical simulations to investigate streaming dynamics in single- and multi-focus acoustic fields. Experimental measurements reveal streaming velocities exceeding $0.4~\text{m/s}$ in single-focus configurations and up to $0.3~\text{m/s}$ in multi-focus setups, with distinct grating lobe-induced lateral jets. While multi-physics finite-element models effectively capture central streaming, they exhibit subtle differences and perform poorly in capturing flow in the side lobes. These findings provide valuable insights into the interplay between acoustic field design and streaming dynamics, offering guidance for optimizing ultrasonic technologies in haptics and levitation applications.
△ Less
Submitted 27 March, 2025;
originally announced March 2025.
-
Transformation twinning to create isospectral cavities
Authors:
Simon V. Lenz,
Sébastien Guenneau,
Bruce W. Drinkwater,
Richard V. Craster,
Marc W. Holderied
Abstract:
Bounded domains have discrete eigenfrequencies/spectra, and cavities with different boundaries and areas have different spectra. A general methodology for isospectral twinning, whereby the spectra of different cavities are made to coincide, is created by combining ideas from across physics including transformation optics, inverse problems and metamaterial cloaking. We twin a hexagonal drum with a…
▽ More
Bounded domains have discrete eigenfrequencies/spectra, and cavities with different boundaries and areas have different spectra. A general methodology for isospectral twinning, whereby the spectra of different cavities are made to coincide, is created by combining ideas from across physics including transformation optics, inverse problems and metamaterial cloaking. We twin a hexagonal drum with a deformed hexagonal drum using a non-singular coordinate transform that adjusts the deformed shape by mapping a near boundary domain to a zone of heterogeneous anisotropic medium. Splines define the mapping zone for twinning these two drums and we verify isospectrality by finite element analysis.
△ Less
Submitted 25 July, 2023; v1 submitted 8 September, 2022;
originally announced September 2022.
-
Exploring high-frequency eddy-current testing for sub-aperture defect characterisation using parametric-manifold mapping
Authors:
Robert R. Hughes,
Bruce W. Drinkwater
Abstract:
Accurate characterisation of small defects remains a challenge in non-destructive testing (NDT). In this paper, a principle-component parametric-manifold mapping approach is applied to single-frequency eddy-current defect characterisation problems for surface breaking defects in a planar half-space. A broad 1-8 MHz frequency-range FE-circuit model & calibration approach is developed & validated to…
▽ More
Accurate characterisation of small defects remains a challenge in non-destructive testing (NDT). In this paper, a principle-component parametric-manifold mapping approach is applied to single-frequency eddy-current defect characterisation problems for surface breaking defects in a planar half-space. A broad 1-8 MHz frequency-range FE-circuit model & calibration approach is developed & validated to simulate eddy-current scans of surface-breaking notch defects. This model is used to generate parametric defect databases for surface breaking defects in an aluminium planar half-space and defect characterisation of experimental measurements performed. Parametric-manifold mapping was conducted in N-dimensional principle component space, reducing the dimensionality of the characterisation problem. In a study characterising slot depth, the model & characterisation approach is shown to accurately invert the depth with greater accuracy than a simple amplitude inversion method with normalised percentage characterisation errors of 38% and 17% respectively measured at 2.0 MHz across 5 slot depths between 0.26 - 2.15 mm. The approach is used to characterise the depth of a sloped slot demonstrating good accuracy up to ~2.0 mm in depth over a broad range of sub-resonance frequencies, indicating applications in geometric feature inversion. Finally the technique is applied to finite rectangular notch defects of surface extents smaller than the diameter of the inspection coil (sub-aperture) over a range of frequencies. The results highlight the limitations in characterising these defects and indicate how the inherent instabilities in resonance can severely limit characterisation at these frequencies.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Characterisation of carbon fibre-reinforced polymer composites through complex Radon-transform analysis of eddy-current data
Authors:
R. R. Hughes,
B. W. Drinkwater,
R. A. Smith
Abstract:
Maintaining the correct fibre orientations and stacking sequence in carbon-fibre reinforced polymers (CFRP) during manufacture is essential for achieving the required mechanical properties of a component. This paper presents and evaluates a method for the rapid characterisation of the fibre orientations present in CFRP structures, and the differentiation of different stacking sequences, through th…
▽ More
Maintaining the correct fibre orientations and stacking sequence in carbon-fibre reinforced polymers (CFRP) during manufacture is essential for achieving the required mechanical properties of a component. This paper presents and evaluates a method for the rapid characterisation of the fibre orientations present in CFRP structures, and the differentiation of different stacking sequences, through the Radon-transform analysis of complex-valued eddy-current testing (ECT) inspection data. A high-frequency (20 MHz) eddy-current inspection system was used to obtain 2D scans of a range of CFRP samples of differing ply stacking sequences. The complex electrical impedance scan data was analysed using Radon-transform techniques to quickly and simply determine the dominant fibre orientations present in the structure. This method is compared to 2D-fast Fourier transform (2D-FFT) analysis of the same data and shown to give superior quantitative results with comparatively fewer computational steps and corrections. Further analysis is presented demonstrating and examining a method for preserving the complex information inherent within the eddy-current scan data during Radon-transform analysis. This investigation shows that the real and imaginary components of the ECT data encode information about the sacking sequence allowing the distinction between composites with different stacking structures. This new analysis technique could be used for in-process analysis of CFRP structures as a more accurate characterisation method, reducing the chance of costly manufacturing errors.
△ Less
Submitted 7 December, 2017;
originally announced January 2018.
-
Metamaterial bricks and quantization of meta-surfaces
Authors:
Gianluca Memoli,
Mihai Caleap,
Michihiro Asakawa,
Deepak R. Sahoo,
Bruce W. Drinkwater,
Sriram Subramanian
Abstract:
Controlling acoustic fields is crucial in diverse applications such as loudspeaker design, ultrasound imaging and therapy, or acoustic particle manipulation. The current approaches use fixed lenses or expensive phased arrays. Here, using a process of analogue-to-digital conversion and wavelet decomposition, we develop the notion of quantal meta-surfaces. The quanta here are small, pre-manufactured…
▽ More
Controlling acoustic fields is crucial in diverse applications such as loudspeaker design, ultrasound imaging and therapy, or acoustic particle manipulation. The current approaches use fixed lenses or expensive phased arrays. Here, using a process of analogue-to-digital conversion and wavelet decomposition, we develop the notion of quantal meta-surfaces. The quanta here are small, pre-manufactured three-dimensional units - which we call metamaterial bricks - each encoding a specific phase delay. These bricks can be assembled into meta-surfaces to generate any diffraction-limited acoustic field. We apply this methodology to show experimental examples of acoustic focusing, steering and, after stacking single meta-surfaces into layers, the more complex field of an acoustic tractor beam. We demonstrate experimentally single-sided air-borne acoustic levitation using meta-layers at various bit-rates: from a 4-bit uniform to 3-bit non-uniform quantization in phase. This powerful methodology dramatically simplifies the design of acoustic devices and provides a key-step towards realising spatial sound modulators.
△ Less
Submitted 25 January, 2017; v1 submitted 5 August, 2016;
originally announced August 2016.
-
Metamaterials: $\textit{supra}$-classical dynamic homogenization
Authors:
Mihai Caleap,
Bruce W Drinkwater
Abstract:
Metamaterials are artificial composite structures designed for controlling waves or fields, and exhibit interaction phenomena that are unexpected on the basis of their chemical constituents. These phenomena are encoded in effective material parameters that can be electronic, magnetic, acoustic, or elastic, and must adequately represent the wave interaction behaviour in the composite within desired…
▽ More
Metamaterials are artificial composite structures designed for controlling waves or fields, and exhibit interaction phenomena that are unexpected on the basis of their chemical constituents. These phenomena are encoded in effective material parameters that can be electronic, magnetic, acoustic, or elastic, and must adequately represent the wave interaction behaviour in the composite within desired frequency ranges. In some cases -- for example, the low frequency regime -- there exist various efficient ways by which effective material parameters for wave propagation in metamaterials may be found. However, the general problem of predicting frequency-dependent dynamic effective constants has remained unsolved. Here, we obtain novel mathematical expressions for the effective parameters of two-dimensional metamaterial systems valid at higher frequencies and wavelengths than previously possible. By way of an example, random configurations of cylindrical scatterers are considered, in various physical contexts: sound waves in a compressible fluid, anti-plane elastic waves, and electromagnetic waves. Our results point towards a paradigm shift in our understanding of these effective properties, and metamaterial designs with functionalities beyond the low-frequency regime are now open for innovation.
△ Less
Submitted 19 November, 2015; v1 submitted 22 July, 2015;
originally announced July 2015.
