-
Temperature dependence of coercivity for isolated Ni nanowires unraveled by high-sensitivity micromagnetometry
Authors:
Evelyn A. Escudero Bruna,
Federico Romá,
Fernando Meneses,
Paula. G. Bercoff,
Moira I. Dolz
Abstract:
Magnetic nanowires are critical components in fields such as data storage and spintronics, where precise control of their magnetic properties is essential for device optimization. In particular, the behavior of isolated nanowires is often different from that of an ensemble, offering an opportunity to explore the role that dipolar and magnetoelastic interactions play in the latter system. Unfortuna…
▽ More
Magnetic nanowires are critical components in fields such as data storage and spintronics, where precise control of their magnetic properties is essential for device optimization. In particular, the behavior of isolated nanowires is often different from that of an ensemble, offering an opportunity to explore the role that dipolar and magnetoelastic interactions play in the latter system. Unfortunately, the comparison between a collection of nanowires and single ones is often poorly characterized, as measuring individual nanowires with weak magnetic signals is a challenging task. In this work, we employ a highly-sensitive micromechanical torsional oscillator to measure the magnetic response of few individual Ni nanowires with 72 +/- 5 nm average diameter, fabricated by electrodeposition in anodic aluminum oxide templates as an array and subsequently released from this membrane. When comparing the magnetic properties as a function of temperature between single nanowires and the array, we show that coercivity values of individual nanowires are at least twice as large as for the array in the range 5 K - 200 K. Also, we characterize the differences in the hysteresis loops, which are more squared for isolated nanowires, with a high magnetic remanence close to 80 % of the saturation value. Our results highlight the crucial role of dipolar and mechanical interactions in modifying the magnetic behavior of nanowires arrays, providing valuable insights for the design and application of nanowires-based magnetic devices.
△ Less
Submitted 19 May, 2025;
originally announced May 2025.
-
Sinusoidal Initialization, Time for a New Start
Authors:
Alberto Fernández-Hernández,
Jose I. Mestre,
Manuel F. Dolz,
Jose Duato,
Enrique S. Quintana-Ortí
Abstract:
Initialization plays a critical role in Deep Neural Network training, directly influencing convergence, stability, and generalization. Common approaches such as Glorot and He initializations rely on randomness, which can produce uneven weight distributions across layer connections. In this paper, we introduce the Sinusoidal initialization, a novel deterministic method that employs sinusoidal funct…
▽ More
Initialization plays a critical role in Deep Neural Network training, directly influencing convergence, stability, and generalization. Common approaches such as Glorot and He initializations rely on randomness, which can produce uneven weight distributions across layer connections. In this paper, we introduce the Sinusoidal initialization, a novel deterministic method that employs sinusoidal functions to construct structured weight matrices expressly to improve the spread and balance of weights throughout the network while simultaneously fostering a more uniform, well-conditioned distribution of neuron activation states from the very first forward pass. Because Sinusoidal initialization begins with weights and activations that are already evenly and efficiently utilized, it delivers consistently faster convergence, greater training stability, and higher final accuracy across a wide range of models, including convolutional neural networks, vision transformers, and large language models. On average, our experiments show an increase of 4.9% in final validation accuracy and 20.9% in convergence speed. By replacing randomness with structure, this initialization provides a stronger and more reliable foundation for Deep Learning systems.
△ Less
Submitted 20 May, 2025; v1 submitted 19 May, 2025;
originally announced May 2025.
-
OUI Need to Talk About Weight Decay: A New Perspective on Overfitting Detection
Authors:
Alberto Fernández-Hernández,
Jose I. Mestre,
Manuel F. Dolz,
Jose Duato,
Enrique S. Quintana-Ortí
Abstract:
We introduce the Overfitting-Underfitting Indicator (OUI), a novel tool for monitoring the training dynamics of Deep Neural Networks (DNNs) and identifying optimal regularization hyperparameters. Specifically, we validate that OUI can effectively guide the selection of the Weight Decay (WD) hyperparameter by indicating whether a model is overfitting or underfitting during training without requirin…
▽ More
We introduce the Overfitting-Underfitting Indicator (OUI), a novel tool for monitoring the training dynamics of Deep Neural Networks (DNNs) and identifying optimal regularization hyperparameters. Specifically, we validate that OUI can effectively guide the selection of the Weight Decay (WD) hyperparameter by indicating whether a model is overfitting or underfitting during training without requiring validation data. Through experiments on DenseNet-BC-100 with CIFAR- 100, EfficientNet-B0 with TinyImageNet and ResNet-34 with ImageNet-1K, we show that maintaining OUI within a prescribed interval correlates strongly with improved generalization and validation scores. Notably, OUI converges significantly faster than traditional metrics such as loss or accuracy, enabling practitioners to identify optimal WD (hyperparameter) values within the early stages of training. By leveraging OUI as a reliable indicator, we can determine early in training whether the chosen WD value leads the model to underfit the training data, overfit, or strike a well-balanced trade-off that maximizes validation scores. This enables more precise WD tuning for optimal performance on the tested datasets and DNNs. All code for reproducing these experiments is available at https://github.com/AlbertoFdezHdez/OUI.
△ Less
Submitted 23 April, 2025;
originally announced April 2025.
-
GreenLightningAI: An Efficient AI System with Decoupled Structural and Quantitative Knowledge
Authors:
Jose Duato,
Jose I. Mestre,
Manuel F. Dolz,
Enrique S. Quintana-Ortí
Abstract:
The number and complexity of artificial intelligence (AI) applications is growing relentlessly. As a result, even with the many algorithmic and mathematical advances experienced over past decades as well as the impressive energy efficiency and computational capacity of current hardware accelerators, training the most powerful and popular deep neural networks comes at very high economic and environ…
▽ More
The number and complexity of artificial intelligence (AI) applications is growing relentlessly. As a result, even with the many algorithmic and mathematical advances experienced over past decades as well as the impressive energy efficiency and computational capacity of current hardware accelerators, training the most powerful and popular deep neural networks comes at very high economic and environmental costs. Recognising that additional optimisations of conventional neural network training is very difficult, this work takes a radically different approach by proposing GreenLightningAI, a new AI system design consisting of a linear model that is capable of emulating the behaviour of deep neural networks by subsetting the model for each particular sample. The new AI system stores the information required to select the system subset for a given sample (referred to as structural information) separately from the linear model parameters (referred to as quantitative knowledge). In this paper we present a proof of concept, showing that the structural information stabilises far earlier than the quantitative knowledge. Additionally, we show experimentally that the structural information can be kept unmodified when re-training the AI system with new samples while still achieving a validation accuracy similar to that obtained when re-training a neural network with similar size. Since the proposed AI system is based on a linear model, multiple copies of the model, trained with different datasets, can be easily combined. This enables faster and greener (re)-training algorithms, including incremental re-training and federated incremental re-training.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes
Authors:
Sophie Charlotte Stebner,
Juri Martschin,
Bahman Arian,
Stefan Dietrich,
Martin Feistle,
Sebastian Hütter,
Rémi Lafarge,
Robert Laue,
Xinyang Li,
Christopher Schulte,
Daniel Spies,
Ferdinand Thein,
Frank Wendler,
Malte Wrobel,
Julian Rozo Vasquez,
Michael Dölz,
Sebastian Münstermann
Abstract:
As recent trends in manufacturing engineering disciplines show a clear development in the sustainable as well as economically efficient design of forming processes, monitoring techniques have been gaining in relevance. In terms of monitoring of product properties, most processes are currently open-loop controlled, entailing that the microstructure evolution, which determines the final product prop…
▽ More
As recent trends in manufacturing engineering disciplines show a clear development in the sustainable as well as economically efficient design of forming processes, monitoring techniques have been gaining in relevance. In terms of monitoring of product properties, most processes are currently open-loop controlled, entailing that the microstructure evolution, which determines the final product properties, is not considered. However, a closed-loop control that can adjust and manipulate the process actuators according to the required product properties of the component will lead to a considerable increase in efficiency of the processes regarding resources and will decrease postproduction of the component. For most forming processes, one set of component dimensions will result in a certain set of product properties. However, to successfully establish closed-loop property controls for the processes, a systematic understanding of the reciprocity of the dimensions after forming and final product properties must be established. This work investigates the evolution of dimensional accuracy as well as product properties for a series of forming processes that utilize different degrees of freedom for process control.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Static magnetic field stimulates growth of maize seeds
Authors:
Lucas M. Ferroni,
Moira I. Dolz,
María Florencia Guerra,
Leonardo Makinistian
Abstract:
The physical pre-treatment of seeds is a growing field of research in agricultural biotechnology. Among its possibilities, magnetopriming of seeds has received increasing attention in the last two decades. Inspired by remarkable reports of the literature on the effects of static magnetic fields (SMF) on maize seeds, we performed similar experiments, though expanding the range of SMF up to 350 mT,…
▽ More
The physical pre-treatment of seeds is a growing field of research in agricultural biotechnology. Among its possibilities, magnetopriming of seeds has received increasing attention in the last two decades. Inspired by remarkable reports of the literature on the effects of static magnetic fields (SMF) on maize seeds, we performed similar experiments, though expanding the range of SMF up to 350 mT, higher than most of the reported studies. With exposure durations of 1 h, we tested 7 different SMF intensities, from 50 to 350 mT at increments of 50 mT. We challenged our findings with an exhaustive analysis of the background static and alternated magnetic fields inside the stove where the germinations took place, in order to rule out background fields as a confounding variable. We found a maximum effect of 108.9 % increase (more than double) in the average total length of plantules at 150 mT, at the 10th day of germination. All other intensities, except 350 mT, also induced a significant growth stimulation. While not seeming to represent a determinant factor, our analysis calls the attention to the possible relevance of different conditions in different levels and zones of standard stoves. Our findings are in line with numerous studies pointing to magnetopriming of maize seeds as a novel, viable and reproducible physical treatment for the enhancement of germination.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Acoustic Echo Cancellation using Residual U-Nets
Authors:
J. Silva-Rodríguez,
M. F. Dolz,
M. Ferrer,
A. Castelló,
V. Naranjo,
G. Piñero
Abstract:
This paper presents an acoustic echo canceler based on a U-Net convolutional neural network for single-talk and double-talk scenarios. U-Net networks have previously been used in the audio processing area for source separation problems because of their ability to reproduce the finest details of audio signals, but to our knowledge, this is the first time they have been used for acoustic echo cancel…
▽ More
This paper presents an acoustic echo canceler based on a U-Net convolutional neural network for single-talk and double-talk scenarios. U-Net networks have previously been used in the audio processing area for source separation problems because of their ability to reproduce the finest details of audio signals, but to our knowledge, this is the first time they have been used for acoustic echo cancellation (AEC). The U-Net hyperparameters have been optimized to obtain the best AEC performance, but using a reduced number of parameters to meet a latency restriction of 40 ms. The training and testing of our model have been carried out within the framework of the 'ICASSP 2021 AEC Challenge' organized by Microsoft. We have trained the optimized U-Net model with a synthetic dataset only (S-U-Net) and with a synthetic dataset and the single-talk set of a real dataset (SR-U-Net), both datasets were released for the challenge. The S-U-Net model presented better results for double-talk scenarios, thus their inferred near-end signals from the blind testset were submitted to the challenge. Our canceler ranked 12th among 17 teams, and 5th among 10 academia teams, obtaining an overall mean opinion score of 3.57.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Bridge in micron-sized Bi2Sr2CaCu2O8+y sample act as converging lens for vortices
Authors:
Joaquín Puig,
Néstor René Cejas Bolecek,
Jazmín Aragón Sánchez,
Moira Inés Dolz,
Marcin Konczykowski,
Yanina Fasano
Abstract:
We report on direct imaging of vortex matter nucleated in micron-sized Bi2Sr2CaCu2O8+y superconducting samples that incidentally present a bridge structure. We find that when nucleating vortices in a field-cooling condition the deck of the bridge acts as a converging lens for vortices. By means of Bitter decoration images allowing us to quantify the enhancement of vortex-vortex interaction energy…
▽ More
We report on direct imaging of vortex matter nucleated in micron-sized Bi2Sr2CaCu2O8+y superconducting samples that incidentally present a bridge structure. We find that when nucleating vortices in a field-cooling condition the deck of the bridge acts as a converging lens for vortices. By means of Bitter decoration images allowing us to quantify the enhancement of vortex-vortex interaction energy per unit length in the deck of the bridge, we are able to estimate that the deck is thinner than 0.6\,$μ$m. We show that the structural properties of vortex matter nucleated in micron-sized thin samples are not significantly affected by sample-thickness variations of the order of half a micron, an important information for type-II superconductors-based mesoscopic technological devices.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
High performance and energy efficient inference for deep learning on ARM processors
Authors:
Adrián Castelló,
Sergio Barrachina,
Manuel F. Dolz,
Enrique S. Quintana-Ortí,
Pau San Juan
Abstract:
We evolve PyDTNN, a framework for distributed parallel training of Deep Neural Networks (DNNs), into an efficient inference tool for convolutional neural networks. Our optimization process on multicore ARM processors involves several high-level transformations of the original framework, such as the development and integration of Cython routines to exploit thread-level parallelism; the design and d…
▽ More
We evolve PyDTNN, a framework for distributed parallel training of Deep Neural Networks (DNNs), into an efficient inference tool for convolutional neural networks. Our optimization process on multicore ARM processors involves several high-level transformations of the original framework, such as the development and integration of Cython routines to exploit thread-level parallelism; the design and development of micro-kernels for the matrix multiplication, vectorized with ARMs NEON intrinsics, that can accommodate layer fusion; and the appropriate selection of several cache configuration parameters tailored to the memory hierarchy of the target ARM processors. Our experiments evaluate both inference throughput (measured in processed images/s) and inference latency (i.e., time-to-response) as well as energy consumption per image when varying the level of thread parallelism and the processor power modes. The experiments with the new inference engine are reported for the ResNet50 v1.5 model on the ImageNet dataset from the MLPerf suite using the ARM v8.2 cores in the NVIDIA Jetson AGX Xavier board. These results show superior performance compared with the well-spread TFLite from Google and slightly inferior results when compared with ArmNN, the native library from ARM for DNN inference.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Non-Gaussian tail in the force distribution: A hallmark of correlated disorder in the host media of elastic objects
Authors:
Jazmín Aragón Sánchez,
Gonzalo Rumi,
Raúl Cortés Maldonado,
Néstor René Cejas Bolecek,
Joaquín Puig,
Pablo Pedrazzini,
Gladys Nieva,
Moira I. Dolz,
Marcin Konczykowski,
Cornelis J. van der Beek,
Alejandro B. Kolton,
Yanina Fasano
Abstract:
Inferring the nature of disorder in the media where elastic objects are nucleated is of crucial importance for many applications but remains a challenging basic-science problem. Here we propose a method to discern whether weak-point or strong-correlated disorder dominates based on characterizing the distribution of the interaction forces between objects mapped in large fields-of-view. We illustrat…
▽ More
Inferring the nature of disorder in the media where elastic objects are nucleated is of crucial importance for many applications but remains a challenging basic-science problem. Here we propose a method to discern whether weak-point or strong-correlated disorder dominates based on characterizing the distribution of the interaction forces between objects mapped in large fields-of-view. We illustrate our proposal with the case-study system of vortex structures nucleated in type-II superconductors with different pinning landscapes. Interaction force distributions are computed from individual vortex positions imaged in thousands-vortices fields-of-view in a two-orders-of-magnitude-wide vortex-density range. Vortex structures nucleated in point-disordered media present Gaussian distributions of the interaction force components. In contrast, if the media have dilute and randomly-distributed correlated disorder, these distributions present non-Gaussian algebraically-decaying tails for large force magnitudes. We propose that detecting this deviation from the Gaussian behavior is a fingerprint of strong disorder, in our case originated from a dilute distribution of correlated pinning centers.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
High Performance and Portable Convolution Operators for ARM-based Multicore Processors
Authors:
Pablo San Juan,
Adrián Castelló,
Manuel F. Dolz,
Pedro Alonso-Jordá,
Enrique S. Quintana-Ortí
Abstract:
The considerable impact of Convolutional Neural Networks on many Artificial Intelligence tasks has led to the development of various high performance algorithms for the convolution operator present in this type of networks. One of these approaches leverages the \imcol transform followed by a general matrix multiplication (GEMM) in order to take advantage of the highly optimized realizations of the…
▽ More
The considerable impact of Convolutional Neural Networks on many Artificial Intelligence tasks has led to the development of various high performance algorithms for the convolution operator present in this type of networks. One of these approaches leverages the \imcol transform followed by a general matrix multiplication (GEMM) in order to take advantage of the highly optimized realizations of the GEMM kernel in many linear algebra libraries. The main problems of this approach are 1) the large memory workspace required to host the intermediate matrices generated by the IM2COL transform; and 2) the time to perform the IM2COL transform, which is not negligible for complex neural networks. This paper presents a portable high performance convolution algorithm based on the BLIS realization of the GEMM kernel that avoids the use of the intermediate memory by taking advantage of the BLIS structure. In addition, the proposed algorithm eliminates the cost of the explicit IM2COL transform, while maintaining the portability and performance of the underlying realization of GEMM in BLIS.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Magnetic hysteresis behavior of granular manganite La$_{0.67}$Ca$_{0.33}$MnO$_3$ nanotubes
Authors:
M. I. Dolz,
S. D. Calderón Rivero,
H. Pastoriza,
F. Romá
Abstract:
A silicon micromechanical torsional oscillator is used to measure the hysteresis loops of two manganite La_0.67Ca_0.33MnO_3 nanotubes at different temperatures, applying an external field along its main axes. These structures are composed of nanograins with a ferromagnetic core surrounded by a dead layer. Micromagnetic calculations based on the stochastic Landau-Lifshitz-Gilbert equation, are perf…
▽ More
A silicon micromechanical torsional oscillator is used to measure the hysteresis loops of two manganite La_0.67Ca_0.33MnO_3 nanotubes at different temperatures, applying an external field along its main axes. These structures are composed of nanograins with a ferromagnetic core surrounded by a dead layer. Micromagnetic calculations based on the stochastic Landau-Lifshitz-Gilbert equation, are performed to validate a simple model that allows for quantitatively describing the ferromagnetic behavior of the system. Further simulations are used to analyze the experimental data more in depth and to calculate the coercive field, the saturation and remanent magnetizations, and the effective magnetic volume for single nanotubes, over a wide temperature range.
△ Less
Submitted 15 May, 2020; v1 submitted 18 December, 2019;
originally announced December 2019.
-
Enhancement of penetration field in vortex nanocrystals due to Andreev bound states
Authors:
M. I. Dolz,
N. R. Cejas Bolecek,
J. Puig,
H. Pastoriza,
G. Nieva,
J. Guimpel,
C. J. van der Beek,
M. Konczykowski,
Y. Fasano
Abstract:
We study the penetration field $H_{\rm P}$ for vortex nanocrystals nucleated in micron-sized samples with edges aligned along the nodal and anti-nodal directions of the d-wave superconducting parameter of Bi$_2$Sr$_2$CaCu$_2$O$_{8 - δ}$. Here we present evidence that the $H_{\rm P}$ for nanocrystals nucleated in samples with edges parallel to the nodal direction is larger than for the antinodal ca…
▽ More
We study the penetration field $H_{\rm P}$ for vortex nanocrystals nucleated in micron-sized samples with edges aligned along the nodal and anti-nodal directions of the d-wave superconducting parameter of Bi$_2$Sr$_2$CaCu$_2$O$_{8 - δ}$. Here we present evidence that the $H_{\rm P}$ for nanocrystals nucleated in samples with edges parallel to the nodal direction is larger than for the antinodal case, $\sim 72$\,\% at low temperatures. This finding supports the theoretical proposal that surface Andreev bound states appearing in a sample with edges parallel to the nodal direction would produce an anomalous Meissner current that increases the Bean-Livingston barrier for vortex penetration.This has been detected thanks to the nucleation of vortex nanocrystals with a significant surface-to-volume ratio.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Unveiling the vortex glass phase in the surface and volume of a type-II superconductor
Authors:
Jazmín Aragón Sánchez,
Raúl Cortés Maldonado,
Néstor René Cejas Bolecek,
Gonzalo Rumi,
Pablo Pedrazzini,
Moira I. Dolz,
Gladys Nieva,
Cornelis J. van der Beek,
Marcin Konczykowski,
C. D. Dewhurst,
R. Cubitt,
Alejandro B. Kolton,
Alain Pautrat,
Yanina Fasano
Abstract:
Order-disorder transitions between glassy phases are quite common in nature and yet a comprehensive survey of the microscopic structural changes remains elusive since the scale of the constituents is tiny and in most cases few of them take part in the transformation. Vortex matter in type-II superconductors is a model system where some of the experimental challenges inherent to this general questi…
▽ More
Order-disorder transitions between glassy phases are quite common in nature and yet a comprehensive survey of the microscopic structural changes remains elusive since the scale of the constituents is tiny and in most cases few of them take part in the transformation. Vortex matter in type-II superconductors is a model system where some of the experimental challenges inherent to this general question can be tackled by adequately choosing the host superconducting sample. For instance, Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$ is a type-II superconductor with weak point disorder that presents a transition between two glassy phases on increasing the constituents' (vortices) density. At low vortex densities, the impact of disorder produces the nucleation of a glassy yet quasi-crystalline phase, the Bragg glass. For high vortex densities the stable phase, coined as $\textit{vortex glass}$, was proposed to be disordered, but its structural properties have remained elusive up to now. Here we answer this question by combining surface and bulk vortex imaging techniques, and show that the vortex glass is neither a messy nor a hexatic phase: in the plane of vortices it presents large crystallites with positional correlations growing algebraically and short-ranged orientational order. However, no dramatic change in the correlation length along the direction of vortices is observed on traversing the order-disorder transformation.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Direct visualization of local interaction forces in Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ vortex matter
Authors:
J. Aragón Sánchez,
R. Cortés Maldonado,
M. I. Dolz,
N. R. Cejas Bolecek,
C. J. van der Beek,
M. Konczykowski,
Y. Fasano
Abstract:
We study the local vortex-vortex interaction force $\textbf{f}_i$ of the structure frozen during a field-cooling process in an electron-irradiated Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ sample. We compute this magnitude from snapshots of the vortex structure obtained via magnetic decoration experiments at various fields H in the same sample. Since the observed structures correspond to the equilibrium ones…
▽ More
We study the local vortex-vortex interaction force $\textbf{f}_i$ of the structure frozen during a field-cooling process in an electron-irradiated Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ sample. We compute this magnitude from snapshots of the vortex structure obtained via magnetic decoration experiments at various fields H in the same sample. Since the observed structures correspond to the equilibrium ones frozen at T$\sim$T$_{irr}$(H), at this temperature the local modulus of $\textbf{f}_i$ roughly equals the local pinning force at the decorated surface of the sample. We estimate the most probable local pinning force from the mode value of the f$_i$(r) distribution, f $_{p}^{m}$. We found that f $_{p}^{m}$ grows algebraically with H and in electron-irradiated samples is 50-20% smaller than for samples with columnar defects.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Entropy jump at the first-order vortex phase transition in Bi2Sr2CaCu2O8+δ with columnar defects
Authors:
G. Rumi,
L. J. Albornoz,
P. Pedrazzini,
M. I. Dolz,
H. Pastoriza,
C. J. van der Beek,
M. Konczykowski,
Y. Fasano
Abstract:
We study the entropy jump associated with the first-order vortex melting transition (FOT) in Bi2Sr2CaCu2O8+δ crystals by means of Hall probe magnetometry. The samples present a diluted distribution of columnar defects (CD) introduced by irradiation with Xe ions. The FOT is detected in ac transmittivity measurements as a paramagnetic peak, the height of which is proportional to the enthalpy differe…
▽ More
We study the entropy jump associated with the first-order vortex melting transition (FOT) in Bi2Sr2CaCu2O8+δ crystals by means of Hall probe magnetometry. The samples present a diluted distribution of columnar defects (CD) introduced by irradiation with Xe ions. The FOT is detected in ac transmittivity measurements as a paramagnetic peak, the height of which is proportional to the enthalpy difference entailed by the transition. By applying the Clausius-Clapeyron relation, we quantify the evolution of the entropy jump Δs as a function of the FOT temperature, TFOT, in both pristine crystals and crystals with CD. On increasing the density of CD, Δs decreases monotonically with respect to values found in pristine samples. The Δs versus TFOT dependence in the case of pristine samples follows reasonably well the theoretical prediction of dominant electromagnetic coupling for a model neglecting the effect of disorder. The data for samples with a diluted distribution of CD are not properly described by such a theoretical model.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Design and implementation of a micro-coil induction magnetometer
Authors:
R. V. Ibañez Bustos,
S. D. Calderón Rivero,
F. Romá,
H. Pastoriza,
M. I. Dolz
Abstract:
We present a micron-sized induction magnetometer designed to measure the magnetic response of superconducting mesoscopic samples. The device is manufactured using the Memscap PolyMUMPs process and consists of two octagonal planar parallel micro-coils covering an area of 240 microns X 240 microns, which are separated by only 2.75 microns. We show that this design is sufficiently sensitive to detect…
▽ More
We present a micron-sized induction magnetometer designed to measure the magnetic response of superconducting mesoscopic samples. The device is manufactured using the Memscap PolyMUMPs process and consists of two octagonal planar parallel micro-coils covering an area of 240 microns X 240 microns, which are separated by only 2.75 microns. We show that this design is sufficiently sensitive to detect the Meissner transition at zero dc field, of a high-Tc superconductor Bi2Sr2CaCu2O8 disk of 40 microns in diameter and 1 micron in thicknesses.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Excess of topological defects induced by confinement in vortex nanocrystals
Authors:
N. R. Cejas Bolecek,
M. I. Dolz,
H. Pastoriza,
M. Konczykowski,
C. J. van der Beek,
A. B. Kolton,
Y. Fasano
Abstract:
We directly image individual vortex positions in nanocrystals in order to unveil the structural property that contributes to the depletion of the entropy-jump entailed at the first-order transition. On reducing the nanocrystal size the density of topological defects increases near the edges over a characteristic length. Within this "healing-length" distance from the sample edge vortex rows tend to…
▽ More
We directly image individual vortex positions in nanocrystals in order to unveil the structural property that contributes to the depletion of the entropy-jump entailed at the first-order transition. On reducing the nanocrystal size the density of topological defects increases near the edges over a characteristic length. Within this "healing-length" distance from the sample edge vortex rows tend to bend while towards the center of the sample the positional order of the vortex structure is what is expected for the Bragg-glass phase. This suggests that the healing-length may be a key quantity to model the entropy-jump depletion in the first-order transition of extremely-layered vortex nanocrystals.
△ Less
Submitted 4 April, 2017;
originally announced April 2017.
-
Size-induced depression of first-order transition lines and entropy-jump in extremely-layered nanocrystalline vortex matter
Authors:
M. I. Dolz,
Y. Fasano,
N. R. Cejas Bolecek,
H. Pastoriza,
V. Mosser,
M. Li,
M. Konczykowski
Abstract:
We detect the persistence of the solidification and order-disorder first-order transition lines in the phase diagram of nanocrystalline Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter down to a system size of less than hundred vortices. The temperature-location of the vortex solidification transition line is not altered by decreasing the sample size although there is a depletion of the entropy-jum…
▽ More
We detect the persistence of the solidification and order-disorder first-order transition lines in the phase diagram of nanocrystalline Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter down to a system size of less than hundred vortices. The temperature-location of the vortex solidification transition line is not altered by decreasing the sample size although there is a depletion of the entropy-jump at the transition with respect to macroscopic vortex matter. The solid order-disorder phase transition field moves upward on decreasing the system size due to the increase of the surface-to-volume ratio of vortices entailing a decrease on the average vortex binding energy.
△ Less
Submitted 2 February, 2016;
originally announced February 2016.
-
Detection of discretized single-shell penetration in mesoscopic vortex matter
Authors:
Moira Inés Dolz,
Yanina Fasano,
Néstor René Cejas Bolecek,
Hernán Pastoriza,
Marcin Konczykowski,
Cornelius Jacominus van der Beek
Abstract:
We investigated configurational changes in mesoscopic vortex matter with less than thousand vortices during flux penetration in freestanding 50 $μ$m diameter disks of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$. High-resolution AC and DC local magnetometry data reveal oscillations in the transmittivity echoed in peaks in the third-harmonics magnetic signal fainting on increasing vortex density. By means…
▽ More
We investigated configurational changes in mesoscopic vortex matter with less than thousand vortices during flux penetration in freestanding 50 $μ$m diameter disks of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$. High-resolution AC and DC local magnetometry data reveal oscillations in the transmittivity echoed in peaks in the third-harmonics magnetic signal fainting on increasing vortex density. By means of extra experimental evidence and a simple geometrical analysis we show that these features fingerprint the discretized entrance of single-shells of vortices having a shape that mimics the sample edge.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Effect of quenched disorder in the entropy-jump at the first-order vortex phase transition of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$
Authors:
M. I. Dolz,
P. Pedrazzini,
H. Pastoriza,
M. Konczykowski,
Y. Fasano
Abstract:
We study the effect of quenched disorder in the thermodynamic magnitudes entailed in the first-order vortex phase transition of the extremely layered Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$ compound. We track the temperature-evolution of the enthalpy and the entropy-jump at the vortex solidification transition by means of AC local magnetic measurements. Quenched disorder is introduced to the pristin…
▽ More
We study the effect of quenched disorder in the thermodynamic magnitudes entailed in the first-order vortex phase transition of the extremely layered Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$ compound. We track the temperature-evolution of the enthalpy and the entropy-jump at the vortex solidification transition by means of AC local magnetic measurements. Quenched disorder is introduced to the pristine samples by means of heavy-ion irradiation with Pb and Xe producing a random columnar-track pins distribution with different densities (matching field $B_Φ$). In contrast with previous magneto-optical reports, we find that the first-order phase transition persists for samples with $B_Φ$ up to 100\,Gauss. For very low densities of quenched disorder (pristine samples), the evolution of the thermodynamic properties can be satisfactorily explained considering a negligible effect of pinning and only electromagnetic coupling between pancake vortices lying in adjacent CuO planes. This description is not satisfactory on increasing magnitude of quenched disorder.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Geometrical confinement effects in layered mesoscopic vortex-matter
Authors:
N. R. Cejas Bolecek,
M. I. Dolz,
A. Kolton,
H. Pastoriza,
C. J. van der Beek,
M. Konczykowski,
M. Menghini,
F. de la Cruz,
G. Nieva,
Y. Fasano
Abstract:
We study geometrical confinement effects in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$ mesoscopic vortex-matter with edge-to-surface ratio of $7-12$%. Samples have in-plane square and circular edges, 30\,$μ$m widths, and $\sim 2\,μ$m thickness. Direct vortex imaging reveals the compact planes of the structure align with the sample edge by introducing topological defects. The defects density is larger fo…
▽ More
We study geometrical confinement effects in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$ mesoscopic vortex-matter with edge-to-surface ratio of $7-12$%. Samples have in-plane square and circular edges, 30\,$μ$m widths, and $\sim 2\,μ$m thickness. Direct vortex imaging reveals the compact planes of the structure align with the sample edge by introducing topological defects. The defects density is larger for circular than for square edges. Molecular dynamics simulations suggest this density is not an out-of-equilibrium property but rather determined by the geometrical confinement.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Latent-heat and non-linear vortex liquid at the vicinity of the first-order phase transition in layered high-Tc superconductors
Authors:
M. I. Dolz,
Y. Fasano,
H. Pastoriza,
V. Mosser,
M. Li,
M. Konczykowski
Abstract:
In this work we revisit the vortex matter phase diagram in layered superconductors solving still open questions by means of AC and DC local magnetic measurements in the paradigmatic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ compound. We show that measuring with AC magnetic techniques is mandatory in order to probe the bulk response of vortex matter, particularly at high-temperatures where surface barriers…
▽ More
In this work we revisit the vortex matter phase diagram in layered superconductors solving still open questions by means of AC and DC local magnetic measurements in the paradigmatic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ compound. We show that measuring with AC magnetic techniques is mandatory in order to probe the bulk response of vortex matter, particularly at high-temperatures where surface barriers for vortex entrance dominate. From the $T_{\rm FOT}$-evolution of the enthalpy and latent-heat at the transition we find that, contrary to previous reports, the nature of the dominant interlayer coupling is electromagnetic in the whole temperature range. By studying the dynamic properties of the phase located at $T \gtrsim T_{\rm FOT}$, we reveal the spanning in a considerable fraction of the phase diagram of a non-linear vortex phase suggesting bulk pinning might play a role even in the liquid vortex phase.
△ Less
Submitted 16 May, 2014;
originally announced May 2014.
-
Persistence of the first-order transition lines in mesoscopic Bi$_2$Sr$_2$CaCu$_2$O$_8$ vortex matter with less than hundred vortices
Authors:
M. Konczykowski,
Y. Fasano,
M. I. Dolz,
H. Pastoriza,
V. Mosser,
M. Li
Abstract:
The persistence of the first-order transition line in the phase diagram of mesoscopic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter is detected down to a system size of less than hundred vortices. Precise and highly-sensitive to bulk currents AC magnetization techniques proved to be mandatory in order to obtain this information. The location of the vortex matter first-order transition lines are…
▽ More
The persistence of the first-order transition line in the phase diagram of mesoscopic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter is detected down to a system size of less than hundred vortices. Precise and highly-sensitive to bulk currents AC magnetization techniques proved to be mandatory in order to obtain this information. The location of the vortex matter first-order transition lines are not altered by decreasing the sample size down to 20 $μ$m. Nevertheless, the onset of irreversible magnetization is affected by increasing the sample surface-to-volume ratio producing a noticeable enlargement of the irreversible vortex region above the second-peak transition.
△ Less
Submitted 18 December, 2012;
originally announced December 2012.
-
Anisotropic response of the moving vortex lattice in superconducting Mo$_{(1-x)}$Ge$_{x}$ amorphous films
Authors:
M. I. Dolz,
D. E. Shalóm,
H. Pastoriza,
D. O. López
Abstract:
We have performed magnetic susceptibility measurements in Mo$_{(1-x)}$Ge$_x$ amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current - temperature phase diagram where the dynamical vortex structures behave…
▽ More
We have performed magnetic susceptibility measurements in Mo$_{(1-x)}$Ge$_x$ amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current - temperature phase diagram where the dynamical vortex structures behave anisotropically. In this region the shielding capability of the superconducting currents measured by the susceptibility coils is less effective along the direction of vortex motion compared to the transverse direction. This anisotropic response is found in the same region where the peak effect in the critical current is developed. On rising temperature the isotropic behavior is recovered.
△ Less
Submitted 29 December, 2011;
originally announced December 2011.
-
Direct determination of the collective pinning radius in high temperature superconductors
Authors:
Moira I. Dolz,
Alejandro B. Kolton,
Hernan Pastoriza
Abstract:
We study finite-size effects at the onset of the irreversible magnetic behaviour of micron-sized Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ single crystals by using silicon micro-oscillators. We find an irreversibility line appearing well below the thermodynamic Bragg-glass melting line at a magnetic field which increases both with increasing the sample radius and with decreasing the temperature. We show tha…
▽ More
We study finite-size effects at the onset of the irreversible magnetic behaviour of micron-sized Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ single crystals by using silicon micro-oscillators. We find an irreversibility line appearing well below the thermodynamic Bragg-glass melting line at a magnetic field which increases both with increasing the sample radius and with decreasing the temperature. We show that this size-dependent irreversibility line can be identified with the crossover between the Larkin and the random manifold regimes of the vortex lattice transverse roughness. Our method allows to determine the three-dimensional weak collective pinning Larkin radius in a {\it direct way}.
△ Less
Submitted 12 May, 2009;
originally announced May 2009.
-
Dependence of vortex phase transitions in mesoscopic BSCCO superconductor at tilted magnetic fields
Authors:
M. I. Dolz,
H. Pastoriza
Abstract:
A micron sized single crystal of the superconductor BSCCO was studied using silicon mechanical micro-oscillators at various tilt angles of the dc magnetic field with respect to the c axis of the sample. Different phases of the vortex matter were detected by measuring changes in the value and sign of the oscillator resonant frequency variation with temperature. We could explain the change in the…
▽ More
A micron sized single crystal of the superconductor BSCCO was studied using silicon mechanical micro-oscillators at various tilt angles of the dc magnetic field with respect to the c axis of the sample. Different phases of the vortex matter were detected by measuring changes in the value and sign of the oscillator resonant frequency variation with temperature. We could explain the change in the sign of this variation at high temperatures as the transition from the 2D liquid of decoupled pancakes to a reversible 3D vortex lattice. The data indicates that this transition only depends on the magnetic field perpendicular to the superconducting layers while the dissipation involved in this process depends on the component parallel to them.
△ Less
Submitted 18 June, 2008;
originally announced June 2008.
-
Magnetic Behavior of Single La$_{0.67}$Ca$_{0.33}$MnO$_3$ Nanotubes: Surface and Shape Effects
Authors:
M. Dolz,
W. Bast,
D. Antonio,
H. Pastoriza,
J. Curiale,
R. D. Sanchez,
A. G. Leyva
Abstract:
We report magnetization experiments in two magnetically isolated ferromagnetic nanotubes of perovskite La$_{0.67}$Ca$_{0.33}$MnO$_3$. The results show that the magnetic anisotropy is determined by the sample shape although the coercive field is reduced by incoherent magnetization reversal modes. The temperature dependence of the magnetization reveals that the magnetic behavior is dominated by gr…
▽ More
We report magnetization experiments in two magnetically isolated ferromagnetic nanotubes of perovskite La$_{0.67}$Ca$_{0.33}$MnO$_3$. The results show that the magnetic anisotropy is determined by the sample shape although the coercive field is reduced by incoherent magnetization reversal modes. The temperature dependence of the magnetization reveals that the magnetic behavior is dominated by grain surface properties. These measurements were acquired using a Silicon micro-mechanical oscillator working in its resonant mode. The sensitivity was enough to measure the magnetic properties of these two samples with a mass lower than 14 picograms and to obtain for the first time the magnetization loop for one isolated nanotube.
△ Less
Submitted 14 March, 2008; v1 submitted 11 September, 2007;
originally announced September 2007.
-
Measurement of mesoscopic High-$T_c$ superconductors using Si mechanical micro-oscillators
Authors:
M. Dolz,
D. Antonio,
H. Pastoriza
Abstract:
In a superconducting mesoscopic sample, with dimensions comparable to the London penetration depth, some properties are qualitatively different to those found in the bulk material. These properties include magnetization, vortex dynamics and ordering of the vortex lattice. In order to detect the small signals produced by this kind of samples, new instruments designed for the microscale are needed…
▽ More
In a superconducting mesoscopic sample, with dimensions comparable to the London penetration depth, some properties are qualitatively different to those found in the bulk material. These properties include magnetization, vortex dynamics and ordering of the vortex lattice. In order to detect the small signals produced by this kind of samples, new instruments designed for the microscale are needed. In this work we use micromechanical oscillators to study the magnetic properties of a Bi$_2$Sr$_2$CaCu$_2$O$_{8 + δ}$ disk with a diameter of 13.5 microns and a thickness of 2.5 microns. The discussion of our results is based on the existence and contribution of inter and intra layer currents.
△ Less
Submitted 26 February, 2007;
originally announced February 2007.
