-
Comparing NASA Discovery and New Frontiers Class Mission Concepts for the Io Volcano Observer (IVO)
Authors:
Christopher W. Hamilton,
Alfred S. McEwen,
Laszlo Keszthelyi,
Lynn M. Carter,
Ashley G. Davies,
Katherine de Kleer,
Kandis Lea Jessup,
Xianzhe Jia,
James T. Keane,
Kathleen Mandt,
Francis Nimmo,
Chris Paranicas,
Ryan S. Park,
Jason E. Perry,
Anne Pommier,
Jani Radebaugh,
Sarah S. Sutton,
Audrey Vorburger,
Peter Wurz,
Cauê Borlina,
Amanda F. Haapala,
Daniella N. DellaGiustina,
Brett W. Denevi,
Sarah M. Hörst,
Sascha Kempf
, et al. (9 additional authors not shown)
Abstract:
Jupiter's moon Io is a highly compelling target for future exploration that offers critical insight into tidal dissipation processes and the geology of high heat flux worlds, including primitive planetary bodies, such as the early Earth, that are shaped by enhanced rates of volcanism. Io is also important for understanding the development of volcanogenic atmospheres and mass-exchange within the Ju…
▽ More
Jupiter's moon Io is a highly compelling target for future exploration that offers critical insight into tidal dissipation processes and the geology of high heat flux worlds, including primitive planetary bodies, such as the early Earth, that are shaped by enhanced rates of volcanism. Io is also important for understanding the development of volcanogenic atmospheres and mass-exchange within the Jupiter System. However, fundamental questions remain about the state of Io's interior, surface, and atmosphere, as well as its role in the evolution of the Galilean satellites. The Io Volcano Observer (IVO) would address these questions by achieving the following three key goals: (A) Determine how and where tidal heat is generated inside Io; (B) Understand how tidal heat is transported to the surface of Io; and (C) Understand how Io is evolving. IVO was selected for Phase A study through the NASA Discovery program in 2020 and, in anticipation of a New Frontiers 5 opportunity, an enhanced IVO-NF mission concept was advanced that would increase the Baseline mission from 10 flybys to 20, with an improved radiation design; employ a Ka-band communications to double IVO's total data downlink; add a wide angle camera for color and stereo mapping; add a dust mass spectrometer; and lower the altitude of later flybys to enable new science. This study compares and contrasts the mission architecture, instrument suite, and science objectives for Discovery (IVO) and New Frontiers (IVO-NF) missions to Io, and advocates for continued prioritization of Io as an exploration target for New Frontiers.
△ Less
Submitted 14 August, 2024;
originally announced August 2024.
-
Comparison of optical spectra between asteroids Ryugu and Bennu: II. High-precision analysis for space weathering trends
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de León,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the…
▽ More
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the spectra of Ryugu and Bennu evolved relative to each other would place a constraint for understanding their origins and evolutions. In this study, we compared the space weathering trends on Ryugu and Bennu by applying the results of cross calibration between ONC-T and MapCam. We show that the average Bennu surface is brighter by 18.0 $\pm$ 1.5% at 550 nm and bluer by 0.18 $\pm$ 0.03 $μ$m$^{-1}$ (480-850 nm slope) than Ryugu. The spectral slopes of surface materials are more uniform on Bennu than on Ryugu at spatial scales $\gtrsim$1 m, but Bennu is more heterogeneous at $\lesssim$1 m. This suggests that lateral mixing due to resurfacing may have been more efficient on Bennu. The reflectance-spectral slope distributions of craters on Ryugu and Bennu appeared to follow two trend lines with an offset before cross calibration, but they converged to a single straight trend without a bend after cross calibration. We show that the spectra of the freshest craters on Ryugu and Bennu are indistinguishable within the uncertainty of cross calibration. These results suggest that Ryugu and Bennu initially had similar spectra before space weathering and that they evolved in completely opposite directions along the same trend line, subsequently evolving into asteroids with different disk-averaged spectra. These findings further suggest that space weathering likely expanded the spectral slope variation of C-complex asteroids, implying that they may have formed from materials with more uniform spectral slopes.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
Shaking and Tumbling: Short- and Long-Timescale Mechanisms for Resurfacing of Near-Earth Asteroid Surfaces from Planetary Tides and Predictions for the 2029 Earth Encounter by (99942) Apophis
Authors:
R. -L. Ballouz,
H. Agrusa,
O. S. Barnouin,
K. J. Walsh,
Y. Zhang,
R. P. Binzel,
V. J. Bray,
D. N. DellaGiustina,
E. R. Jawin,
J. V. DeMartini,
A. Marusiak,
P. Michel,
N. Murdoch,
D. C. Richardson,
E. G. Rivera-Valentín,
A. S. Rivkin,
Y. Tang
Abstract:
Spectral characterization of near-Earth asteroids (NEAs) has revealed a continuum of space-weathered states for the surfaces of S-complex NEAs, with Q-class NEAs, an S-complex subclass, most closely matching the un-weathered surfaces of ordinary chondrite meteorites. Dynamical calculations of the orbital evolution of S-complex NEAs revealed that Q-class NEAs tend to have close encounters with terr…
▽ More
Spectral characterization of near-Earth asteroids (NEAs) has revealed a continuum of space-weathered states for the surfaces of S-complex NEAs, with Q-class NEAs, an S-complex subclass, most closely matching the un-weathered surfaces of ordinary chondrite meteorites. Dynamical calculations of the orbital evolution of S-complex NEAs revealed that Q-class NEAs tend to have close encounters with terrestrial planets, suggesting that planetary tides may play a role in refreshing NEA surfaces. However, the exact physical mechanism(s) that drive resurfacing through tidal encounters and the encounter distance at which these mechanisms are effective, has remained unclear. Through the lens of the upcoming (99942) Apophis encounter with Earth in 2029, we investigate the potential for surface mobilization through tidally-driven seismic shaking over short-timescales during encounter and subsequent surface slope evolution over longer-timescales driven by tumbling. We perform multi-scale numerical modeling and find that the 2029 encounter will induce short-term tidally-driven discrete seismic events that lead to high-frequency (>0.1 Hz) surface accelerations that reach magnitudes similar to Apophis' gravity, and that may be detectable by modern seismometers. It is still unclear if the shaking we model translates to widespread particle mobilization and/or lofting. We also find there will be a significant change in Apophis' tumbling spin state that could lead to longer-term surface refreshing in response to tumbling-induced surface slope changes. We propose that through these mechanisms, space-weathered S-class asteroid surfaces may become refreshed through the exposure of unweathered underlying material. These results will be tested by the future exploration of Apophis by NASA's OSIRIS-APEX.
△ Less
Submitted 4 October, 2024; v1 submitted 7 June, 2024;
originally announced June 2024.
-
Asteroid (101955) Bennu in the Laboratory: Properties of the Sample Collected by OSIRIS-REx
Authors:
Dante S. Lauretta,
Harold C. Connolly, Jr.,
Joseph E. Aebersold,
Conel M. O. D. Alexander,
Ronald-L. Ballouz,
Jessica J. Barnes,
Helena C. Bates,
Carina A. Bennett,
Laurinne Blanche,
Erika H. Blumenfeld,
Simon J. Clemett,
George D. Cody,
Daniella N. DellaGiustina,
Jason P. Dworkin,
Scott A. Eckley,
Dionysis I. Foustoukos,
Ian A. Franchi,
Daniel P. Glavin,
Richard C. Greenwood,
Pierre Haenecour,
Victoria E. Hamilton,
Dolores H. Hill,
Takahiro Hiroi,
Kana Ishimaru,
Fred Jourdan
, et al. (28 additional authors not shown)
Abstract:
On 24 September 2023, the NASA OSIRIS-REx mission dropped a capsule to Earth containing approximately 120 g of pristine carbonaceous regolith from Bennu. We describe the delivery and initial allocation of this asteroid sample and introduce its bulk physical, chemical, and mineralogical properties from early analyses. The regolith is very dark overall, with higher-reflectance inclusions and particl…
▽ More
On 24 September 2023, the NASA OSIRIS-REx mission dropped a capsule to Earth containing approximately 120 g of pristine carbonaceous regolith from Bennu. We describe the delivery and initial allocation of this asteroid sample and introduce its bulk physical, chemical, and mineralogical properties from early analyses. The regolith is very dark overall, with higher-reflectance inclusions and particles interspersed. Particle sizes range from sub-micron dust to a stone about 3.5 cm long. Millimeter-scale and larger stones typically have hummocky or angular morphologies. A subset of the stones appears mottled by brighter material that occurs as veins and crusts. Hummocky stones have the lowest densities and mottled stones have the highest. Remote sensing of the surface of Bennu detected hydrated phyllosilicates, magnetite, organic compounds, carbonates, and scarce anhydrous silicates, all of which the sample confirms. We also find sulfides, presolar grains, and, less expectedly, Na-rich phosphates, as well as other trace phases. The sample composition and mineralogy indicate substantial aqueous alteration and resemble those of Ryugu and the most chemically primitive, low-petrologic-type carbonaceous chondrites. Nevertheless, we find distinct hydrogen, nitrogen, and oxygen isotopic compositions, and some of the material we analyzed is enriched in fluid-mobile elements. Our findings underscore the value of sample return, especially for low-density material that may not readily survive atmospheric entry, and lay the groundwork for more comprehensive analyses.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
QRIS: A Quantitative Reflectance Imaging System for the Pristine Sample of Asteroid Bennu
Authors:
Ruby E. Fulford,
Dathon R. Golish,
Dante S. Lauretta,
Daniella N. DellaGiustina,
Steve Meyer,
Nicole Lunning,
Christopher Snead,
Kevin Righter,
Jason P. Dworkin,
Carina A. Bennett,
Harold C. Connolly Jr.,
Taylor Johnson,
Anjani T. Polit,
Pierre Haennecour,
Andrew J. Ryan
Abstract:
The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preli…
▽ More
The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preliminary examination of the Bennu sample. QRIS uses a 12-bit machine vision camera to measure reflectance over wavelength bands spanning the near ultraviolet to the near infrared. Raw data are processed by a calibration pipeline that generates a series of monochromatic, high-dynamic-range reflectance images, as well as band ratio maps, band depth maps, and 3-channel color images. The purpose of these spectral reflectance data is to help characterize lithologies in the sample and compare them to lithologies observed on Bennu by the OSIRIS-REx spacecraft. This initial assessment of lithological diversity was intended to help select the subsamples that will be used to address mission science questions about the early solar system and the origins of life and to provide important context for the selection of representative subsamples for preservation and distribution to international partners. When QRIS imaged the Bennu sample, unexpected calibration issues arose that had not been evident at imaging rehearsals and negatively impacted the quality of QRIS data. These issues were caused by stray light within the lens and reflections off the glovebox window and interior, and were exacerbated by the sample's extremely low reflectance. QRIS data were useful for confirming conclusions drawn from other data, but reflectance and spectral data from QRIS alone unfortunately have limited utility.
△ Less
Submitted 2 May, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
Comparison of optical spectra between asteroids Ryugu and Bennu:I. Cross calibration between Hayabusa2/ONC-T and OSIRIS-REx/MapCam
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de Leon,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. H…
▽ More
Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. However, ONC-T and MapCam have a large imager-to-imager systematic error of up to 15% caused by the difference in radiometric calibration targets. To resolve this problem, we cross calibrated albedo and color data between the two instruments using the Moon as the common calibration standard. The images of the Moon taken by ONC-T and MapCam were compared with those simulated using photometry models developed from lunar orbiter data. Our results show that the cross-calibrated reflectance of Ryugu and Bennu can be obtained by upscaling the pre-cross-calibrated reflectance of Bennu by 13.3 +/- 1.6% at b band, 13.2 +/- 1.5% at v band, 13.6 +/- 1.7% at w band, and 14.8 +/- 1.8% at x band, while those for Ryugu are kept the same. These factors compensate for the imager-to-imager bias caused by differences in targets used for radiometric calibration and solar irradiance models used for data reduction. Need for such large upscaling underscore the importance of using the cross-calibrated data for accurately comparing the Ryugu and Bennu data. The uncertainty in these factors show that the reflectance of Ryugu and Bennu can be compared with <2% accuracy after applying our results. By applying our cross calibration, the geometric albedo of Bennu became consistent with those observed by ground-based telescopes and OVIRS. Our result can be simply applied by multiplying a constant to the publicly available data and enables accurate comparison of the optical spectra of Ryugu and Bennu in future studies.
△ Less
Submitted 18 June, 2024; v1 submitted 23 June, 2023;
originally announced June 2023.
-
High-Resolution Observations of Bright Boulders on Asteroid Ryugu: 1. Size Frequency Distribution and Morphology
Authors:
Chiho Sugimoto,
Eri Tatsumi,
Yuichiro Cho,
Tomokatsu Morota,
Rie Honda,
Shingo Kameda,
Yosuhiro Yokota,
Koki Yumoto,
Minami Aoki,
Daniella N. DellaGiustina,
Tatsuhiro Michikami,
Takahiro Hiroi,
Deborah L. Domingue,
Patrick Michel,
Stefan E. Schröder,
Tomoki Nakamura,
Manabu Yamada,
Naoya Sakatani,
Toru Kouyama,
Chikatoshi Honda,
Masahiko Hayakawa,
Moe Matsuoka,
Hidehiko Suzuki,
Kazuo Yoshioka,
Kazunori Ogawa
, et al. (12 additional authors not shown)
Abstract:
The near-Earth asteroid (162173) Ryugu displays a Cb-type average spectrum and a very low average normal albedo of 0.04. Although the majority of boulders on Ryugu have reflectance spectra and albedo similar to the Ryugu average, a small fraction of boulders exhibit anomalously high albedo and distinctively different spectra. A previous study (Tatsumi et al., 2021) based on the 2.7-km observations…
▽ More
The near-Earth asteroid (162173) Ryugu displays a Cb-type average spectrum and a very low average normal albedo of 0.04. Although the majority of boulders on Ryugu have reflectance spectra and albedo similar to the Ryugu average, a small fraction of boulders exhibit anomalously high albedo and distinctively different spectra. A previous study (Tatsumi et al., 2021) based on the 2.7-km observations and a series of low-altitude (down to 68 m) descent observations conducted prior to the first touchdown have shown that the spectra of these anomalous boulders can be classified into two distinct groups corresponding to S and C type asteroids. The former originate most likely from an impactor that collided with Ryugu's parent body, whereas the latter may be from portions of Ryugu's parent body that experienced a different temperature history than experienced by the majority of boulder materials. In this study, we analyzed images captured after the first touchdown to determine the quantitative properties of these bright boulders on Ryugu. We measured the sizes of more than a thousand bright boulders and characterized the morphologic properties of the largest ones. Analyses revealed many properties of bright boulders important for the evolution of Ryugu and its parent body. The size-frequency distributions of S- and C-type bright boulders follow power laws. We obtained the ratios of the total volume and surface area of S-type bright boulders to those of average dark boulders on the Ryugu surface. Also, many of the bright boulders are embedded in a larger substrate boulder, suggesting that they have experienced mixing and conglomeration with darker fragments on the parent body, rather than gently landing on Ryugu during or after its formation by reaccumulation. This is consistent with the hypothesis that S-type bright boulders were likely mixed during and/or before a catastrophic disruption.
△ Less
Submitted 28 October, 2021;
originally announced October 2021.
-
High-Resolution Observations of Bright Boulders on Asteroid Ryugu: 2. Spectral Properties
Authors:
Chiho Sugimoto,
Eri Tatsumi,
Yuichiro Cho,
Tomokatsu Morota,
Rie Honda,
Shingo Kameda,
Yosuhiro Yokota,
Koki Yumoto,
Minami Aoki,
Daniella N. DellaGiustina,
Tatsuhiro Michikami,
Takahiro Hiroi,
Deborah L. Domingue,
Patrick Michel,
Stefan Schröder,
Tomoki Nakamura,
Manabu Yamada,
Naoya Sakatani,
Toru Kouyama,
Chikatoshi Honda,
Masahiko Hayakawa,
Moe Matsuoka,
Hidehiko Suzuki,
Kazuo Yoshioka,
Kazunori Ogawa
, et al. (12 additional authors not shown)
Abstract:
Many small boulders with reflectance values higher than 1.5 times the average reflectance have been found on the near-Earth asteroid 162173 Ryugu. Based on their visible wavelength spectral differences, Tatsumi et al. (2021) defined two bright boulder classes: C-type and S-type. These two classifications of bright boulders have different size distributions and spectral trends. In this study, we me…
▽ More
Many small boulders with reflectance values higher than 1.5 times the average reflectance have been found on the near-Earth asteroid 162173 Ryugu. Based on their visible wavelength spectral differences, Tatsumi et al. (2021) defined two bright boulder classes: C-type and S-type. These two classifications of bright boulders have different size distributions and spectral trends. In this study, we measured the spectra of 79 bright boulders and investigated their detailed spectral properties. Analyses obtained a number of important results. First, S-type bright boulders on Ryugu have spectra that are similar to those found for two different ordinary chondrites with different initial spectra that have been experimentally space weathered the same way. This suggests that there may be two populations of S-type bright boulders on Ryugu, perhaps originating from two different impactors that hit its parent body. Second, the model space-weathering ages of meter-size S-type bright boulders, based on spectral change rates derived in previous experimentally irradiated ordinary chondrites, are 0.1-1 Myr, which is consistent with the crater retention age (<Myr) of the ~1-m deep surface layer on Ryugu. This agreement strongly suggests that the Ryugu surface is extremely young, implying that the samples acquired from the Ryugu surface should be fresh. Third, the lack of a serpentine absorption in the S-type clast embedded in one of the large brecciated boulders indicates that fragmentation and cementation that created the breccias occurred after the termination of aqueous alteration. Fourth, C-type bright boulders exhibit a continuous spectral trend similar to the heating track of low-albedo carbonaceous chondrites, such as CM and CI. Other processes, such as space weathering and grain size effects, cannot primarily account for their spectral variation.
△ Less
Submitted 28 October, 2021;
originally announced October 2021.
-
Widely distributed exogenic materials of varying compositions and morphologies on asteroid (101955) Bennu
Authors:
Eri Tatsumi,
Marcel Popescu,
Humberto Campins,
Julia de León,
Juan Luis Rizos Carcía,
Javier Licandro,
Amy A. Simon,
Hannah H. Kaplan,
Daniella N. DellaGiustina,
Dathon R. Golish,
Dante S. Lauretta
Abstract:
Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydro…
▽ More
Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydrous silicates. The exogenic materials are spatially resolved by the telescopic camera PolyCam. All such materials are brighter than their surroundings, and they are expressed in a variety of morphologies: homogeneous, breccia-like, inclusion-like, and others. Inclusion-like features are the most common. Visible spectrophotometry was obtained for 46 of the 77 locations from MapCam images. Principal component analysis indicates at least two trends: (i) mixing of Bennu's average spectrum with a strong 1-um band absorption, possibly from pyroxene-rich material, and (ii) mixing with a weak 1-um band absorption. The endmember with a strong 1-um feature is consistent with Howardite-Eucrite-Diogenite (HED) meteorites, whereas the one showing a weak 1-um feature may be consistent with HEDs, ordinary chondrites, or carbonaceous chondrites. The variation in the few available near-infrared reflectance spectra strongly suggests varying compositions among the exogenic materials. Thus, Bennu might record the remnants of multiple impacts with different compositions to its parent body, which could have happened in the very early history of the Solar System. Moreover, at least one of the exogenic objects is compositionally different from the exogenic materials found on the similar asteroid (162173) Ryugu, and they suggest different impact tracks.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Using artificial neural networks to improve photometric modeling in airless bodies
Authors:
J. L. Rizos,
A. Asensio-Ramos,
D. R. Golish,
D. N. DellaGiustina,
J. Licandro,
J. de León,
H. Campins,
E. Tatsumi,
M. Popescu
Abstract:
Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, au…
▽ More
Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, automatic, and efficient photometric modeling methodology which is tested and validated using Bennu images acquired by the camera MapCam from the OSIRIS-REx spacecraft. It consists of a supervised machine learning algorithm through an artificial neural network. Our system provides a more precise modeling for all color filters than the previous procedures which are already published, offering an improvement over this classic approach of up to 14.30%, as well as a considerable reduction in computing time.
△ Less
Submitted 27 August, 2021; v1 submitted 1 June, 2021;
originally announced June 2021.
-
Characterization of Exogenic Boulders on Near-Earth Asteroid (101955) Bennu from OSIRIS-REx Color Images
Authors:
Lucille Le Corre,
Vishnu Reddy,
William F. Bottke,
Daniella N. DellaGiustina,
Keara Burke,
Jennifer Nolau,
Robin B. Van Auken,
Dathon R. Golish,
Juan Sanchez,
Jian-Yang Li,
Christian d'Aubigny,
Bashar Rizk,
Dante Lauretta
Abstract:
A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-c…
▽ More
A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-color MapCam data from the OSIRIS-REx mission. We confirm the presence of exogenic boulders similar to eucrites and find that mixtures of eucrites with carbonaceous material is also a possible composition for some boulders. Some of the exogenic boulders have spectral properties similar to those of ordinary chondrite (OC) meteorites, although the laboratory spectra of these meteorites have a higher albedo than those measured on Bennu, which could be explained by either a grain size effect, the presence of impact melt, or optical mixing with carbonaceous material owing to dust coating. Our Monte Carlo simulations predict that the median amount of OC mass added to the parent body of Bennu is 0.055% and 0.037% of the volume of a 100- and 200-km-diameter parent body, respectively. If Bennu was a uniformly mixed byproduct of parent body and S-type projectiles, the equivalent mass of OC material would be a sphere with a diameter of 36 to 40 m (or a volume of 24,200 to 33,600 m3). The total amount of OC material in the interior of Bennu estimated from the MapCam data is slightly higher (91,000-150,000 m3).
△ Less
Submitted 23 April, 2021;
originally announced April 2021.
-
Bennu's global surface and two candidate sample sites characterized by spectral clustering of OSIRIS-REx multispectral images
Authors:
J. L. Rizos,
J. de Leon,
J. Licandro,
D. R. Golish,
H. Campins,
E. Tatsumi,
M. Popescu,
D. N. DellaGiustina,
M. Pajola,
J. -Y. Li,
K. J. Becker,
D. S. Lauretta
Abstract:
The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work,…
▽ More
The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work, we apply an unsupervised machine learning classification through the K-Means algorithm to spectrophotometrically characterize the surface of Bennu, and in particular Nightingale and Osprey. We first analyze a global mosaic of Bennu, from which we find four clusters scattered across the surface, reduced to three when we normalize the images at 550 nm. The three spectral clusters are associated with boulders and show significant differences in spectral slope and UV value. We do not see evidence of latitudinal non-uniformity, which suggests that Bennu's surface is well-mixed. In our higher-resolution analysis of the primary and backup sample sites, we find three representative normalized clusters, confirming an inverse correlation between reflectance and spectral slope (the darkest areas being the reddest ones) and between b' normalized reflectance and slope. Nightingale and Osprey are redder than the global surface of Bennu by more than $1σ$ from average, consistent with previous findings, with Nightingale being the reddest ($S' = (- 0.3 \pm 1.0) \times 10^{- 3}$ percent per thousand angstroms). We see hints of a weak absorption band at 550 nm at the candidate sample sites and globally, which lends support to the proposed presence of magnetite on Bennu.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu
Authors:
Pedro H. Hasselmann,
Sonia Fornasier,
Maria A. Barucci,
Alice Praet,
Beth E. Clark,
Jian-Yang Li,
Dathon R. Golish,
Daniella N. DellaGiustina,
Jasinghege Don P. Deshapriya,
Xian-Duan Zou,
Mike G. Daly,
Olivier S. Barnouin,
Amy A. Simon,
Dante S. Lauretta
Abstract:
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpr…
▽ More
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Maximizing the value of Solar System data through Planetary Spatial Data Infrastructures
Authors:
Jani Radebaugh,
Bradley J. Thomson,
Brent Archinal,
Ross Beyer,
Dani DellaGiustina,
Caleb Fassett,
Lisa Gaddis,
Sander Goossens,
Trent Hare,
Jay Laura,
Pete Mouginis-Mark,
Andrea Naß,
Alex Patthoff,
Julie Stopar,
Sarah Sutton,
David Williams,
Justin Hagerty,
Louise Prockter
Abstract:
Planetary spatial data returned by spacecraft, including images and higher-order products such as mosaics, controlled basemaps, and digital elevation models (DEMs), are of critical importance to NASA, its commercial partners and other space agencies. Planetary spatial data are an essential component of basic scientific research and sustained planetary exploration and operations. The Planetary Data…
▽ More
Planetary spatial data returned by spacecraft, including images and higher-order products such as mosaics, controlled basemaps, and digital elevation models (DEMs), are of critical importance to NASA, its commercial partners and other space agencies. Planetary spatial data are an essential component of basic scientific research and sustained planetary exploration and operations. The Planetary Data System (PDS) is performing the essential job of archiving and serving these data, mostly in raw or calibrated form, with less support for higher-order, more ready-to-use products. However, many planetary spatial data remain not readily accessible to and/or usable by the general science user because particular skills and tools are necessary to process and interpret them from the raw initial state. There is a critical need for planetary spatial data to be more accessible and usable to researchers and stakeholders. A Planetary Spatial Data Infrastructure (PSDI) is a collection of data, tools, standards, policies, and the people that use and engage with them. A PSDI comprises an overarching support system for planetary spatial data. PSDIs (1) establish effective plans for data acquisition; (2) create and make available higher-order products; and (3) consider long-term planning for correct data acquisition, processing and serving (including funding). We recommend that Planetary Spatial Data Infrastructures be created for all bodies and key regions in the Solar System. NASA, with guidance from the planetary science community, should follow established data format standards to build foundational and framework products and use those to build and apply PDSIs to all bodies. Establishment of PSDIs is critical in the coming decade for several locations under active or imminent exploration, and for all others for future planning and current scientific analysis.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Overcoming the Challenges Associated with Image-based Mapping of Small Bodies in Preparation for the OSIRIS-REx Mission to (101955) Bennu
Authors:
D. N. DellaGiustina,
C. A. Bennett,
K. Becker,
D. R Golish,
L. Le Corre,
D. A. Cook,
K. L. Edmundson,
M. Chojnacki,
S. S. Sutton,
M. P. Milazzo,
B. Carcich,
M. C. Nolan,
N. Habib,
K. N. Burke,
T. Becker,
P. H. Smith,
K. J. Walsh,
K. Getzandanner,
D. R. Wibben,
J. M. Leonard,
M. M. Westermann,
A. T. Polit,
J. N. Kidd Jr.,
C. W. Hergenrother,
W. V. Boynton
, et al. (16 additional authors not shown)
Abstract:
The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can re…
▽ More
The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecraft's sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with mapping a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroid's surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based mapping of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Expected spectral characteristics of (101955) Bennu and (162173) Ryugu, targets of the OSIRIS-REx and Hayabusa2 missions
Authors:
J. de León,
H. Campins,
D. Morate,
M. De Prá,
V. Alí-Lagoa,
J. Licandro,
J. L. Rizos,
N. Pinilla-Alonso,
D. N. DellaGiustina,
D. S. Lauretta,
M. Popescu,
V. Lorenzi
Abstract:
NASA's OSIRIS-REx and JAXA's Hayabusa2 sample-return missions are currently on their way to encounter primitive near-Earth asteroids (101955) Bennu and (162173) Ryugu, respectively. Spectral and dynamical evidence indicates that these near-Earth asteroids originated in the inner part of the main belt. There are several primitive collisional families in this region, and both these asteroids are mos…
▽ More
NASA's OSIRIS-REx and JAXA's Hayabusa2 sample-return missions are currently on their way to encounter primitive near-Earth asteroids (101955) Bennu and (162173) Ryugu, respectively. Spectral and dynamical evidence indicates that these near-Earth asteroids originated in the inner part of the main belt. There are several primitive collisional families in this region, and both these asteroids are most likely to have originated in the Polana-Eulalia family complex. We present the expected spectral characteristics of both targets based on our studies of our primitive collisional families in the inner belt: Polana-Eulalia, Erigone, Sulamitis, and Clarissa. Observations were obtained in the framework of our PRIMitive Asteroids Spectroscopic Survey (PRIMASS). Our results are especially relevant to the planning and interpretation of in-situ images and spectra to be obtained by the two spacecraft during the encounters with their targets.
△ Less
Submitted 22 May, 2018;
originally announced May 2018.
-
Developing a Method to Determine Electrical Conductivity in Meteoritic Materials with Applications to Induction Heating Theory (2008 Student Thesis)
Authors:
Daniella N. DellaGiustina
Abstract:
Magnetic induction was first proposed as a planetary heating mechanism by Sonett and Colburn in 1968, in recent years this theory has lost favor as a plausible source of heating in the early solar system. However, new models of proto-planetary disk evolution suggest that magnetic fields play an important role in solar system formation. In particular, the magneto-hydrodynamic behavior of proto-plan…
▽ More
Magnetic induction was first proposed as a planetary heating mechanism by Sonett and Colburn in 1968, in recent years this theory has lost favor as a plausible source of heating in the early solar system. However, new models of proto-planetary disk evolution suggest that magnetic fields play an important role in solar system formation. In particular, the magneto-hydrodynamic behavior of proto-planetary disks is believed to be responsible for the net outward flow of angular momentum in the solar system. It is important to re-evaluate the plausibility of magnetic induction based on the intense magnetic field environments described by the most recent models of proto-planetary disk evolution.
In order to re-evaluate electromagnetic induction theory the electrical conductivity of meteorites must be determined. To develop a technique capable of making these measurements, a time-varying magnetic field was generated to inductively heat metallic control samples. The thermal response of each sample, which depends on electrical conductivity, was monitored until a thermal steady state was achieved. The relationship between conductivity and thermal response can be exploited to estimate the electrical conductivity of unknown samples. After applying the technique to various metals it was recognized that this method is not capable of making precise electrical conductivity measurements. However, this method can constrain the product of the electrical conductivity and the square of the magnetic permeability, or $σ{μ^2}$, for meteoritic and metallic samples alike. The results also illustrate that along with electrical conductivity σ, the magnetic permeability μ of a substance has an important effect on induction heating phenomena for paramagnetic (μ/μ0 > 1) and especially ferromagnetic materials (μ/μ0 >> 1).
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
OCAMS: The OSIRIS-REx Camera Suite
Authors:
B. Rizk,
C. Drouet d'Aubigny,
D. Golish,
C. Fellows,
C. Merrill,
P. Smith,
M. S. Walker,
J. E. Hendershot,
J. Hancock,
S. H. Bailey,
D. DellaGiustina,
D. Lauretta,
R. Tanner,
M. Williams,
K. Harshman,
M. Fitzgibbon,
W. Verts,
J. Chen,
T. Connors,
D. Hamara,
A. Dowd,
A. Lowman,
M. Dubin,
R. Burt,
M. Whiteley
, et al. (30 additional authors not shown)
Abstract:
The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the…
▽ More
The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the surface, observe the sampling event itself, and image the sample head in order to verify its readiness to be stowed. They document the history of Bennu as an example of early solar system material, as a microgravity body with a planetesimal size-scale, and as a carbonaceous object. OCAMS is fitted with three cameras. The MapCam records point-source color images on approach to the asteroid in order to connect ground-based point-source observations of Bennu to later higher-resolution surface spectral imaging. The SamCam documents the sample site before, during, and after it is disturbed by the sample mechanism. The PolyCam, using its focus mechanism, observes the sample site at sub-centimeter resolutions, revealing surface texture and morphology. While their imaging requirements divide naturally between the three cameras, they preserve a strong degree of functional overlap. OCAMS and the other spacecraft instruments allow the OSIRIS-REx mission to collect a sample from a microgravity body on the same visit during which it was first optically acquired from long range, a useful capability as humanity explores near-Earth, Main-Belt and Jupiter Trojan asteroids.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
OSIRIS-REx: Sample Return from Asteroid (101955) Bennu
Authors:
D. S. Lauretta,
S. S. Balram-Knutson,
E. Beshore,
W. V. Boynton,
C. Drouet dAubigny,
D. N. DellaGiustina,
H. L. Enos,
D. R. Gholish,
C. W. Hergenrother,
E. S. Howell,
C. A. Johnson,
E. T. Morton,
M. C. Nolan,
B. Rizk,
H. L. Roper,
A. E. Bartels,
B. J. Bos,
J. P. Dworkin,
D. E. Highsmith,
D. A. Lorenz,
L. F. Lim,
R. Mink,
M. C. Moreau,
J. A. Nuth,
D. C. Reuter
, et al. (23 additional authors not shown)
Abstract:
In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019…
▽ More
In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in August 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennus resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.