Showing 1–50 of 63 results for author: De, D S

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

Hidden symmetries and the generic spectral setting of generalized laplacians on homogeneous spaces

Authors: Diego S. De Oliveira, Marcus A. M. Marrocos

Abstract: The purpose of this work is to establish the spectral setting of some generalized Laplace operators associated to a generic $G$-invariant metric on a compact homogeneous space $M=G/K$. We show that this generic spectral configuration depends on the $G$-isometries and on some certain hidden symmetries constructed in the adjacent structures of $M$ and of these operators. The purpose of this work is to establish the spectral setting of some generalized Laplace operators associated to a generic $G$-invariant metric on a compact homogeneous space $M=G/K$. We show that this generic spectral configuration depends on the $G$-isometries and on some certain hidden symmetries constructed in the adjacent structures of $M$ and of these operators. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: arXiv admin note: text overlap with arXiv:2501.18747

MSC Class: 35J05; 22C05; 22E46; 53C35

A search for the anomalous events detected by ANITA using the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato, A. Bartz Mocellin , et al. (352 additional authors not shown)

Abstract: A dedicated search for upward-going air showers at zenith angles exceeding $110^\circ$ and energies $E>0.1$ EeV has been performed using the Fluorescence Detector of the Pierre Auger Observatory. The search is motivated by two "anomalous" radio pulses observed by the ANITA flights I and III which appear inconsistent with the Standard Model of particle physics. Using simulations of both regular cos… ▽ More A dedicated search for upward-going air showers at zenith angles exceeding $110^\circ$ and energies $E>0.1$ EeV has been performed using the Fluorescence Detector of the Pierre Auger Observatory. The search is motivated by two "anomalous" radio pulses observed by the ANITA flights I and III which appear inconsistent with the Standard Model of particle physics. Using simulations of both regular cosmic ray showers and upward-going events, a selection procedure has been defined to separate potential upward-going candidate events and the corresponding exposure has been calculated in the energy range [0.1-33] EeV. One event has been found in the search period between 1 Jan 2004 and 31 Dec 2018, consistent with an expected background of $0.27 \pm 0.12$ events from mis-reconstructed cosmic ray showers. This translates to an upper bound on the integral flux of $(7.2 \pm 0.2) \times 10^{-21}$ cm$^{-2}$ sr$^{-1}$ y$^{-1}$ and $(3.6 \pm 0.2) \times 10^{-20}$ cm$^{-2}$ sr$^{-1}$ y$^{-1}$ for an $E^{-1}$ and $E^{-2}$ spectrum, respectively. An upward-going flux of showers normalized to the ANITA observations is shown to predict over 34 events for an $E^{-3}$ spectrum and over 8.1 events for a conservative $E^{-5}$ spectrum, in strong disagreement with the interpretation of the anomalous events as upward-going showers. △ Less

Submitted 6 February, 2025; originally announced February 2025.

Comments: 10+5 Pages of Manuscript plus Supplemental Material, 3+8 figures, Accepted for publication in Physical Review Letters

Digital twins in tourism: a systematic literature review

Authors: Duarte Sampaio de Almeida, Fernando Brito e Abreu, Inês Boavida-Portugal

Abstract: Purpose: This systematic literature review (SLR) characterizes the current state of the art on digital twinning (DT) technology in tourism-related applications. We aim to evaluate the types of DTs described in the literature, identifying their purposes, the areas of tourism where they have been proposed, their main components, and possible future directions based on current work. Design/methodol… ▽ More Purpose: This systematic literature review (SLR) characterizes the current state of the art on digital twinning (DT) technology in tourism-related applications. We aim to evaluate the types of DTs described in the literature, identifying their purposes, the areas of tourism where they have been proposed, their main components, and possible future directions based on current work. Design/methodology/approach: We conducted this SLR with bibliometric analysis based on an existing, validated methodology. Thirty-four peer-reviewed studies from three major scientific databases were selected for review. They were categorized using a taxonomy that included tourism type, purpose, spatial scale, data sources, data linkage, visualization, and application. Findings: The topic is at an early, evolving stage, as the oldest study found dates back to 2021. Most reviewed studies deal with cultural tourism, focusing on digitising cultural heritage. Destination management is the primary purpose of these DTs, with mainly site-level spatial scales. In many studies, the physical-digital data linkage is unilateral, lacking twin synchronization. In most DTs considered bilateral, the linkage is indirect. There are more applied than theoretical studies, suggesting progress in applying DTs in the field. Finally, there is an extensive research gap regarding DT technology in tourism, which is worth filling. Originality/Value: This paper presents a novel SLR with a bibliometric analysis of DTs' applied and theoretical application in tourism. Each reviewed publication is assessed and characterized, identifying the current state of the topic, possible research gaps, and future directions. △ Less

Submitted 3 January, 2025; originally announced February 2025.

A note about the generic irreducibility of the spectrum of the Laplacian on homogeneous spaces

Authors: Diego S. de Oliveira, Marcus A. M. Marrocos

Abstract: Petrecca and Röser (2018, \cite{Petrecca2019}), and Schueth (2017, \cite{Schueth2017}) had shown that for a generic $G$-invariant metric $g$ on certain compact homogeneous spaces $M=G/K$ (including symmetric spaces of rank 1 and some Lie groups), the spectrum of the Laplace-Beltrami operator $Δ_g$ was real $G$-simple. The same is not true for the complex version of $Δ_g$ when there is a presence o… ▽ More Petrecca and Röser (2018, \cite{Petrecca2019}), and Schueth (2017, \cite{Schueth2017}) had shown that for a generic $G$-invariant metric $g$ on certain compact homogeneous spaces $M=G/K$ (including symmetric spaces of rank 1 and some Lie groups), the spectrum of the Laplace-Beltrami operator $Δ_g$ was real $G$-simple. The same is not true for the complex version of $Δ_g$ when there is a presence of representations of complex or quaternionic type. We show that these types of representations induces a $Q_8$-action that commutes with the Laplacian in such way that $G$-properties of the real version of the operator have to be understood as $(Q_8 \times G)$-properties on its corresponding complex version. Also we argue that for symmetric spaces on rank $\geq 2$ there are algebraic symmetries on the corresponding root systems which relates distinct irreducible representations on the same eigenspace. △ Less

Submitted 30 January, 2025; originally announced January 2025.

MSC Class: 35J05; 22C05; 22E46; 53C35

Journal ref: Oliveira, D.S.d., Marrocos, M.A.M. A note about the generic irreducibility of the spectrum of the Laplacian on homogeneous spaces. manuscripta math. 175, 143 154 (2024)

Towards Safe and Honest AI Agents with Neural Self-Other Overlap

Authors: Marc Carauleanu, Michael Vaiana, Judd Rosenblatt, Cameron Berg, Diogo Schwerz de Lucena

Abstract: As AI systems increasingly make critical decisions, deceptive AI poses a significant challenge to trust and safety. We present Self-Other Overlap (SOO) fine-tuning, a promising approach in AI Safety that could substantially improve our ability to build honest artificial intelligence. Inspired by cognitive neuroscience research on empathy, SOO aims to align how AI models represent themselves and ot… ▽ More As AI systems increasingly make critical decisions, deceptive AI poses a significant challenge to trust and safety. We present Self-Other Overlap (SOO) fine-tuning, a promising approach in AI Safety that could substantially improve our ability to build honest artificial intelligence. Inspired by cognitive neuroscience research on empathy, SOO aims to align how AI models represent themselves and others. Our experiments on LLMs with 7B, 27B, and 78B parameters demonstrate SOO's efficacy: deceptive responses of Mistral-7B-Instruct-v0.2 dropped from 73.6% to 17.2% with no observed reduction in general task performance, while in Gemma-2-27b-it and CalmeRys-78B-Orpo-v0.1 deceptive responses were reduced from 100% to 9.3% and 2.7%, respectively, with a small impact on capabilities. In reinforcement learning scenarios, SOO-trained agents showed significantly reduced deceptive behavior. SOO's focus on contrastive self and other-referencing observations offers strong potential for generalization across AI architectures. While current applications focus on language models and simple RL environments, SOO could pave the way for more trustworthy AI in broader domains. Ethical implications and long-term effects warrant further investigation, but SOO represents a significant step forward in AI safety research. △ Less

Submitted 20 December, 2024; originally announced December 2024.

Comments: NeurIPS 2024 Safe Generative AI Workshop

HTS Undulator Design Study and First Results

Authors: B. Krasch, F. Abusaif, T. Arndt, N. Glamann, A. Grau, R. Nast, D. Saez de Jauregui

Abstract: Undulators are X-ray sources that are widely utilised in advanced synchrotron radiation sources and freeelectron laser facilities. Due to sustainability and energy efficiency, the development focuses on small-scale, high-field, and especially compact undulators with short period lengths ($\leq$ 10 mm) and narrow magnetic gaps ($\leq$ 4 mm). Therefore, hightemperature superconducting (HTS) tapes, w… ▽ More Undulators are X-ray sources that are widely utilised in advanced synchrotron radiation sources and freeelectron laser facilities. Due to sustainability and energy efficiency, the development focuses on small-scale, high-field, and especially compact undulators with short period lengths ($\leq$ 10 mm) and narrow magnetic gaps ($\leq$ 4 mm). Therefore, hightemperature superconducting (HTS) tapes, which can provide a high critical current density and high critical magnetic fields at higher temperatures, are extensively used and investigated at the Karlsruhe Institute of Technology. A new concept of superconducting undulators (SCUs) was introduced and further developed by laser-scribing a meander pattern into the superconducting layer to achieve a quasi-sinusoidal current path through the HTS tape. Here we present the complete and final design of such a compact SCU, in particular our latest results regarding the design of the liner with its tapering in the warm region, as well as the cryogenic cooling concept. △ Less

Submitted 13 November, 2024; originally announced November 2024.

KIT Superconducting Undulator Development -- Story of a successful industrial collaboration & future prospects

Authors: B. Krasch, A. Bernhard, E. Bründermann, S. Fatehi, J. Gethmann, N. Glamann, A. Grau, A. Hobl, A. -S. Müller, D. Saez de Jauregui, E. Tan, W. Walter

Abstract: Undulators are X-ray sources widely used in synchrotron storage rings and free-electron laser facilities. With the commercial availability of low-temperature superconductors, a new type of undulator was born, the superconducting undulator (SCU). In this context, the industrial cooperation between the Karlsruhe Institute of Technology and Bilfinger Nuclear and Energy Transition GmbH started more th… ▽ More Undulators are X-ray sources widely used in synchrotron storage rings and free-electron laser facilities. With the commercial availability of low-temperature superconductors, a new type of undulator was born, the superconducting undulator (SCU). In this context, the industrial cooperation between the Karlsruhe Institute of Technology and Bilfinger Nuclear and Energy Transition GmbH started more than 15 years ago. Since then, many projects have been successfully completed, leading to the production of the world's leading full-scale commercial SCUs based on conduction cooling. Starting with the SCU15, the first of its kind installed SCU providing light to a beamline, followed by the SCU20 installed and still in operation at the Karlsruhe Research Accelerator. The successful realisation of such SCUs has required the simultaneous development of appropriate measurement facilities such as CASPER I and CASPER II. △ Less

Submitted 5 November, 2024; v1 submitted 4 November, 2024; originally announced November 2024.

Self-assembled clusters of magnetically tilted dipoles

Authors: P. D. S. de Lima, A. Lyons, A. Irannezhad, J. M. de Araújo, S. Hutzler, M. S. Ferreira

Abstract: Motivated by the idea of using simple macroscopic examples to illustrate the physics of complex systems, we modify a historic experimental setup in which interacting floating magnets spontaneously self-assemble into ordered clusters. By making the cluster components mechanically stable against their natural tendency to flip and coalesce, we can monitor the torque experienced by individual magnets… ▽ More Motivated by the idea of using simple macroscopic examples to illustrate the physics of complex systems, we modify a historic experimental setup in which interacting floating magnets spontaneously self-assemble into ordered clusters. By making the cluster components mechanically stable against their natural tendency to flip and coalesce, we can monitor the torque experienced by individual magnets through the macroscopic tilt angles they acquire when exposed to non-collinear external fields. A mathematical model that reproduces the empirical observations is introduced, enabling us to go beyond the experimental cases considered. The model confirms the existence of alternative orderings as the number of objects increases. Furthermore, a simpler and more mathematically transparent version of our model enables us to establish the conditions under which the cluster structure is stable and when it will collapse. We argue that our simple experimental setup combined with the accompanying models may be useful to describe general features seen in systems composed of mutually repulsive particles in the presence of modulating confining fields. △ Less

Submitted 28 August, 2024; originally announced August 2024.

Comments: 14 pages, 8 figures, submitted to PRE

MyoGestic: EMG Interfacing Framework for Decoding Multiple Spared Degrees of Freedom of the Hand in Individuals with Neural Lesions

Authors: Raul C. Sîmpetru, Dominik I. Braun, Arndt U. Simon, Michael März, Vlad Cnejevici, Daniela Souza de Oliveira, Nico Weber, Jonas Walter, Jörg Franke, Daniel Höglinger, Cosima Prahm, Matthias Ponfick, Alessandro Del Vecchio

Abstract: Restoring limb motor function in individuals with spinal cord injury (SCI), stroke, or amputation remains a critical challenge, one which affects millions worldwide. Recent studies show through surface electromyography (EMG) that spared motor neurons can still be voluntarily controlled, even without visible limb movement . These signals can be decoded and used for motor intent estimation; however,… ▽ More Restoring limb motor function in individuals with spinal cord injury (SCI), stroke, or amputation remains a critical challenge, one which affects millions worldwide. Recent studies show through surface electromyography (EMG) that spared motor neurons can still be voluntarily controlled, even without visible limb movement . These signals can be decoded and used for motor intent estimation; however, current wearable solutions lack the necessary hardware and software for intuitive interfacing of the spared degrees of freedom after neural injuries. To address these limitations, we developed a wireless, high-density EMG bracelet, coupled with a novel software framework, MyoGestic. Our system allows rapid and tailored adaptability of machine learning models to the needs of the users, facilitating real-time decoding of multiple spared distinctive degrees of freedom. In our study, we successfully decoded the motor intent from two participants with SCI, two with spinal stroke , and three amputees in real-time, achieving several controllable degrees of freedom within minutes after wearing the EMG bracelet. We provide a proof-of-concept that these decoded signals can be used to control a digitally rendered hand, a wearable orthosis, a prosthesis, or a 2D cursor. Our framework promotes a participant-centered approach, allowing immediate feedback integration, thus enhancing the iterative development of myocontrol algorithms. The proposed open-source software framework, MyoGestic, allows researchers and patients to focus on the augmentation and training of the spared degrees of freedom after neural lesions, thus potentially bridging the gap between research and clinical application and advancing the development of intuitive EMG interfaces for diverse neural lesions. △ Less

Submitted 14 August, 2024; originally announced August 2024.

Comments: 23 pages, 8 figures

ACM Class: H.5.2; J.3; I.5.4; D.2.13

Journal ref: Science Advances, 11, 2025, eads9150

Unexpected Benefits of Self-Modeling in Neural Systems

Authors: Vickram N. Premakumar, Michael Vaiana, Florin Pop, Judd Rosenblatt, Diogo Schwerz de Lucena, Kirsten Ziman, Michael S. A. Graziano

Abstract: Self-models have been a topic of great interest for decades in studies of human cognition and more recently in machine learning. Yet what benefits do self-models confer? Here we show that when artificial networks learn to predict their internal states as an auxiliary task, they change in a fundamental way. To better perform the self-model task, the network learns to make itself simpler, more regul… ▽ More Self-models have been a topic of great interest for decades in studies of human cognition and more recently in machine learning. Yet what benefits do self-models confer? Here we show that when artificial networks learn to predict their internal states as an auxiliary task, they change in a fundamental way. To better perform the self-model task, the network learns to make itself simpler, more regularized, more parameter-efficient, and therefore more amenable to being predictively modeled. To test the hypothesis of self-regularizing through self-modeling, we used a range of network architectures performing three classification tasks across two modalities. In all cases, adding self-modeling caused a significant reduction in network complexity. The reduction was observed in two ways. First, the distribution of weights was narrower when self-modeling was present. Second, a measure of network complexity, the real log canonical threshold (RLCT), was smaller when self-modeling was present. Not only were measures of complexity reduced, but the reduction became more pronounced as greater training weight was placed on the auxiliary task of self-modeling. These results strongly support the hypothesis that self-modeling is more than simply a network learning to predict itself. The learning has a restructuring effect, reducing complexity and increasing parameter efficiency. This self-regularization may help explain some of the benefits of self-models reported in recent machine learning literature, as well as the adaptive value of self-models to biological systems. In particular, these findings may shed light on the possible interaction between the ability to model oneself and the ability to be more easily modeled by others in a social or cooperative context. △ Less

Submitted 23 July, 2024; v1 submitted 14 July, 2024; originally announced July 2024.

Rethinking harmless refusals when fine-tuning foundation models

Authors: Florin Pop, Judd Rosenblatt, Diogo Schwerz de Lucena, Michael Vaiana

Abstract: In this paper, we investigate the degree to which fine-tuning in Large Language Models (LLMs) effectively mitigates versus merely conceals undesirable behavior. Through the lens of semi-realistic role-playing exercises designed to elicit such behaviors, we explore the response dynamics of LLMs post fine-tuning interventions. Our methodology involves prompting models for Chain-of-Thought (CoT) reas… ▽ More In this paper, we investigate the degree to which fine-tuning in Large Language Models (LLMs) effectively mitigates versus merely conceals undesirable behavior. Through the lens of semi-realistic role-playing exercises designed to elicit such behaviors, we explore the response dynamics of LLMs post fine-tuning interventions. Our methodology involves prompting models for Chain-of-Thought (CoT) reasoning and analyzing the coherence between the reasoning traces and the resultant outputs. Notably, we identify a pervasive phenomenon we term \emph{reason-based deception}, where models either stop producing reasoning traces or produce seemingly ethical reasoning traces that belie the unethical nature of their final outputs. We further examine the efficacy of response strategies (polite refusal versus explicit rebuttal) in curbing the occurrence of undesired behavior in subsequent outputs of multi-turn interactions. Our findings reveal that explicit rebuttals significantly outperform polite refusals in preventing the continuation of undesired outputs and nearly eliminate reason-based deception, challenging current practices in model fine-tuning. Accordingly, the two key contributions of this paper are (1) defining and studying reason-based deception, a new type of hidden behavior, and (2) demonstrating that rebuttals provide a more robust response model to harmful requests than refusals, thereby highlighting the need to reconsider the response strategies in fine-tuning approaches. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: ICLR 2024 AGI Workshop Poster

A Carrying Capacity Calculator for Pedestrians Using OpenStreetMap Data: Application to Urban Tourism and Public Spaces

Authors: Duarte Sampaio de Almeida, Rodrigo Simões, Fernando Brito e Abreu, Adriano Lopes, Inês Boavida-Portugal

Abstract: Determining the carrying capacity of urban tourism destinations and public spaces is essential for sustainable management. This paper presents an online tool that calculates pedestrian carrying capacities for user-defined areas based on OpenStreetMap (OSM) data. The tool considers physical, real, and effective carrying capacities by incorporating parameters such as area per pedestrian, rotation fa… ▽ More Determining the carrying capacity of urban tourism destinations and public spaces is essential for sustainable management. This paper presents an online tool that calculates pedestrian carrying capacities for user-defined areas based on OpenStreetMap (OSM) data. The tool considers physical, real, and effective carrying capacities by incorporating parameters such as area per pedestrian, rotation factor, corrective factors, and management capacity. The carrying capacity calculator aids in balancing environmental, economic, social, and experiential factors to prevent overcrowding and preserve the quality of life for residents and visitors. This tool is particularly useful for tourism destination management, urban planning, and event management, ensuring positive visitor experiences and sustainable infrastructure development. We detail the implementation of the calculator, its underlying algorithm, and its application to the Santa Maria Maior parish in Lisbon, highlighting its effectiveness in managing urban tourism and public spaces. △ Less

Submitted 24 June, 2024; originally announced June 2024.

ACM Class: J.2; K.4

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. Al Kadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola, R. B. Amir , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 18 December, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Journal ref: JINST 19 (2024) P11025

A portrait of the rotation of Ultra-Cool Dwarfs revealed by TESS

Authors: D. O. Fontinele, P. D. S. de Lima, Y. S. Messias, R. L. Gomes, C. E. Ferreira Lopes, B. L. Canto Martins, I. C. Leão, J. M. de Araújo, E. Janot Pacheco, J. R. De Medeiros

Abstract: This study presents the results of a search for rotation signature in 250 Gaia DR3 Ultra-Cool Dwarfs (UCDs) with TESS light curves. We identified 71 targets with unambiguous periodicities, of which 61 present rotation signatures and a single source behavior, with periods between 0.133 and 5.81 days. Five UCDs show double-dip features, namely variations with two periods, one approximately double or… ▽ More This study presents the results of a search for rotation signature in 250 Gaia DR3 Ultra-Cool Dwarfs (UCDs) with TESS light curves. We identified 71 targets with unambiguous periodicities, of which 61 present rotation signatures and a single source behavior, with periods between 0.133 and 5.81 days. Five UCDs show double-dip features, namely variations with two periods, one approximately double or half the other. The remaining ten UCDs with unambiguous variability present a likely non-single behavior. We also found 20 UCDs showing complex behavior in their light curves, with noticeable fluctuations and irregular structure, with a few exhibiting apparent changes in their temporal structure. The remaining 159 targets show noisy light curves corresponding to low-amplitude signals, whose temporal variation cannot be easily identified. The distribution of the UCDs with rotation signature in the CMD diagram points to a lack of rotating objects within about $11.5<M_{G}<12.5$ and $G-G_{RP}<1.5$ separating them into two regimes, one mainly composed of less massive late-M stars with $P_{rot} \geq 1.0$ d, and another mainly composed of more massive early-M stars with $P_{rot}<1.0$ d. It is important to emphasize that by separating stars into age intervals, one observes that UCDs with $P_{rot} \geq 1.0$ d tend to be located in regions of younger objects, and, in contrast, those with $P_{rot}<1.0$ d are mainly concentrated in regions of older objects. Whether these trends of stars contrasting the sample separation is physical or produced by observational biases is a question to be verified in future studies. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 16 pages, 4 figures 4 tables, accepted for publication in ApJ

Impact of the Magnetic Horizon on the Interpretation of the Pierre Auger Observatory Spectrum and Composition Data

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato, A. Bartz Mocellin , et al. (342 additional authors not shown)

Abstract: The flux of ultra-high energy cosmic rays reaching Earth above the ankle energy (5 EeV) can be described as a mixture of nuclei injected by extragalactic sources with very hard spectra and a low rigidity cutoff. Extragalactic magnetic fields existing between the Earth and the closest sources can affect the observed CR spectrum by reducing the flux of low-rigidity particles reaching Earth. We perfo… ▽ More The flux of ultra-high energy cosmic rays reaching Earth above the ankle energy (5 EeV) can be described as a mixture of nuclei injected by extragalactic sources with very hard spectra and a low rigidity cutoff. Extragalactic magnetic fields existing between the Earth and the closest sources can affect the observed CR spectrum by reducing the flux of low-rigidity particles reaching Earth. We perform a combined fit of the spectrum and distributions of depth of shower maximum measured with the Pierre Auger Observatory including the effect of this magnetic horizon in the propagation of UHECRs in the intergalactic space. We find that, within a specific range of the various experimental and phenomenological systematics, the magnetic horizon effect can be relevant for turbulent magnetic field strengths in the local neighbourhood of order $B_{\rm rms}\simeq (50-100)\,{\rm nG}\,(20\rm{Mpc}/{d_{\rm s})( 100\,\rm{kpc}/L_{\rm coh}})^{1/2}$, with $d_{\rm s}$ the typical intersource separation and $L_{\rm coh}$ the magnetic field coherence length. When this is the case, the inferred slope of the source spectrum becomes softer and can be closer to the expectations of diffusive shock acceleration, i.e., $\propto E^{-2}$. An additional cosmic-ray population with higher source density and softer spectra, presumably also extragalactic and dominating the cosmic-ray flux at EeV energies, is also required to reproduce the overall spectrum and composition results for all energies down to 0.6~EeV. △ Less

Submitted 1 August, 2024; v1 submitted 4 April, 2024; originally announced April 2024.

Comments: Matches published version

Journal ref: JCAP07(2024)094

Testing Hadronic-Model Predictions of Depth of Maximum of Air-Shower Profiles and Ground-Particle Signals using Hybrid Data of the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato, A. Bartz Mocellin , et al. (346 additional authors not shown)

Abstract: We test the predictions of hadronic interaction models regarding the depth of maximum of air-shower profiles, $X_{max}$, and ground-particle signals in water-Cherenkov detectors at 1000 m from the shower core, $S(1000)$, using the data from the fluorescence and surface detectors of the Pierre Auger Observatory. The test consists in fitting the measured two-dimensional ($S(1000)$, $X_{max}$) distri… ▽ More We test the predictions of hadronic interaction models regarding the depth of maximum of air-shower profiles, $X_{max}$, and ground-particle signals in water-Cherenkov detectors at 1000 m from the shower core, $S(1000)$, using the data from the fluorescence and surface detectors of the Pierre Auger Observatory. The test consists in fitting the measured two-dimensional ($S(1000)$, $X_{max}$) distributions using templates for simulated air showers produced with hadronic interaction models EPOS-LHC, QGSJet II-04, Sibyll 2.3d and leaving the scales of predicted $X_{max}$ and the signals from hadronic component at ground as free fit parameters. The method relies on the assumption that the mass composition remains the same at all zenith angles, while the longitudinal shower development and attenuation of ground signal depend on the mass composition in a correlated way. The analysis was applied to 2239 events detected by both the fluorescence and surface detectors of the Pierre Auger Observatory with energies between $10^{18.5}$ to $10^{19.0}$ eV and zenith angles below $60^\circ$. We found, that within the assumptions of the method, the best description of the data is achieved if the predictions of the hadronic interaction models are shifted to deeper $X_{max}$ values and larger hadronic signals at all zenith angles. Given the magnitude of the shifts and the data sample size, the statistical significance of the improvement of data description using the modifications considered in the paper is larger than $5σ$ even for any linear combination of experimental systematic uncertainties. △ Less

Submitted 3 May, 2024; v1 submitted 19 January, 2024; originally announced January 2024.

Comments: Published version

Journal ref: Phys. Rev. D 109 (2024) 102001

Constraints on metastable superheavy dark matter coupled to sterile neutrinos with the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato, A. Bartz Mocellin , et al. (346 additional authors not shown)

Abstract: Dark matter particles could be superheavy, provided their lifetime is much longer than the age of the universe. Using the sensitivity of the Pierre Auger Observatory to ultra-high energy neutrinos and photons, we constrain a specific extension of the Standard Model of particle physics that meets the lifetime requirement for a superheavy particle by coupling it to a sector of ultra-light sterile ne… ▽ More Dark matter particles could be superheavy, provided their lifetime is much longer than the age of the universe. Using the sensitivity of the Pierre Auger Observatory to ultra-high energy neutrinos and photons, we constrain a specific extension of the Standard Model of particle physics that meets the lifetime requirement for a superheavy particle by coupling it to a sector of ultra-light sterile neutrinos. Our results show that, for a typical dark coupling constant of 0.1, the mixing angle $θ_m$ between active and sterile neutrinos must satisfy, roughly, $θ_m \lesssim 1.5\times 10^{-6}(M_X/10^9~\mathrm{GeV})^{-2}$ for a mass $M_X$ of the dark-matter particle between $10^8$ and $10^{11}~$GeV. △ Less

Submitted 14 March, 2024; v1 submitted 24 November, 2023; originally announced November 2023.

Comments: Version accepted for publication in PRD Letters, including Supplemental Material

Journal ref: Phys. Rev. D 109 L081101 (2024)

Bayesian Time-Lapse Full Waveform Inversion using Hamiltonian Monte Carlo

Authors: Paulo Douglas S. de Lima, Mauro S. Ferreira, Gilberto Corso, João M. de Araújo

Abstract: Time-lapse images carry out important information about dynamic changes in Earth's interior which can be inferred using different Full Waveform Inversion (FWI) schemes. The estimation process is performed by manipulating more than one seismic dataset, associated with the baseline and monitors surveys. The time-lapse variations can be so minute and localised that quantifying the uncertainties becom… ▽ More Time-lapse images carry out important information about dynamic changes in Earth's interior which can be inferred using different Full Waveform Inversion (FWI) schemes. The estimation process is performed by manipulating more than one seismic dataset, associated with the baseline and monitors surveys. The time-lapse variations can be so minute and localised that quantifying the uncertainties becomes fundamental to assessing the reliability of the results. The Bayesian formulation of the FWI problem naturally provides confidence levels in the solution, but evaluating the uncertainty of time-lapse seismic inversion remains a challenge due to the ill-posedness and high dimensionality of the problem. The Hamiltonian Monte Carlo (HMC) can be used to effectively sample over high dimensional distributions with affordable computational efforts. In this context, we propose a probabilistic Bayesian sequential approach for time-lapse FWI using the HMC method. Our approach relies on the integration of the baseline survey information as prior knowledge in the monitor estimation. We compare the proposed methodology with a parallel scheme in perfect and perturbed acquisition geometry scenarios. We also investigate the correlation effect between baseline and monitor samples in the propagated uncertainties. The results show that our strategy provides accurate times-lapse estimates with errors of similar magnitude to the parallel methodology. △ Less

Submitted 9 December, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 12 pages, 6 figures

Radio Measurements of the Depth of Air-Shower Maximum at the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato , et al. (350 additional authors not shown)

Abstract: The Auger Engineering Radio Array (AERA), part of the Pierre Auger Observatory, is currently the largest array of radio antenna stations deployed for the detection of cosmic rays, spanning an area of $17$ km$^2$ with 153 radio stations. It detects the radio emission of extensive air showers produced by cosmic rays in the $30-80$ MHz band. Here, we report the AERA measurements of the depth of the s… ▽ More The Auger Engineering Radio Array (AERA), part of the Pierre Auger Observatory, is currently the largest array of radio antenna stations deployed for the detection of cosmic rays, spanning an area of $17$ km$^2$ with 153 radio stations. It detects the radio emission of extensive air showers produced by cosmic rays in the $30-80$ MHz band. Here, we report the AERA measurements of the depth of the shower maximum ($X_\text{max}$), a probe for mass composition, at cosmic-ray energies between $10^{17.5}$ to $10^{18.8}$ eV, which show agreement with earlier measurements with the fluorescence technique at the Pierre Auger Observatory. We show advancements in the method for radio $X_\text{max}$ reconstruction by comparison to dedicated sets of CORSIKA/CoREAS air-shower simulations, including steps of reconstruction-bias identification and correction, which is of particular importance for irregular or sparse radio arrays. Using the largest set of radio air-shower measurements to date, we show the radio $X_\text{max}$ resolution as a function of energy, reaching a resolution better than $15$ g cm$^{-2}$ at the highest energies, demonstrating that radio $X_\text{max}$ measurements are competitive with the established high-precision fluorescence technique. In addition, we developed a procedure for performing an extensive data-driven study of systematic uncertainties, including the effects of acceptance bias, reconstruction bias, and the investigation of possible residual biases. These results have been cross-checked with air showers measured independently with both the radio and fluorescence techniques, a setup unique to the Pierre Auger Observatory. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: Submitted to Phys. Rev. D

Demonstrating Agreement between Radio and Fluorescence Measurements of the Depth of Maximum of Extensive Air Showers at the Pierre Auger Observatory

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. Bakalova, F. Barbato , et al. (350 additional authors not shown)

Abstract: We show, for the first time, radio measurements of the depth of shower maximum ($X_\text{max}$) of air showers induced by cosmic rays that are compared to measurements of the established fluorescence method at the same location. Using measurements at the Pierre Auger Observatory we show full compatibility between our radio and the previously published fluorescence data set, and between a subset of… ▽ More We show, for the first time, radio measurements of the depth of shower maximum ($X_\text{max}$) of air showers induced by cosmic rays that are compared to measurements of the established fluorescence method at the same location. Using measurements at the Pierre Auger Observatory we show full compatibility between our radio and the previously published fluorescence data set, and between a subset of air showers observed simultaneously with both radio and fluorescence techniques, a measurement setup unique to the Pierre Auger Observatory. Furthermore, we show radio $X_\text{max}$ resolution as a function of energy and demonstrate the ability to make competitive high-resolution $X_\text{max}$ measurements with even a sparse radio array. With this, we show that the radio technique is capable of cosmic-ray mass composition studies, both at Auger and at other experiments. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: Submitted to Phys. Rev. Lett

Ground observations of a space laser for the assessment of its in-orbit performance

Authors: The Pierre Auger Collaboration, O. Lux, I. Krisch, O. Reitebuch, D. Huber, D. Wernham, T. Parrinello, :, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira , et al. (358 additional authors not shown)

Abstract: The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the… ▽ More The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 10 pages, 10 figures

AugerPrime Surface Detector Electronics

Authors: The Pierre Auger Collaboration, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, C. Aramo, P. R. Araújo Ferreira, E. Arnone, J. C. Arteaga Velázquez, P. Assis, G. Avila, E. Avocone, A. M. Badescu, A. Bakalova, F. Barbato , et al. (346 additional authors not shown)

Abstract: Operating since 2004, the Pierre Auger Observatory has led to major advances in our understanding of the ultra-high-energy cosmic rays. The latest findings have revealed new insights that led to the upgrade of the Observatory, with the primary goal of obtaining information on the primary mass of the most energetic cosmic rays on a shower-by-shower basis. In the framework of the upgrade, called Aug… ▽ More Operating since 2004, the Pierre Auger Observatory has led to major advances in our understanding of the ultra-high-energy cosmic rays. The latest findings have revealed new insights that led to the upgrade of the Observatory, with the primary goal of obtaining information on the primary mass of the most energetic cosmic rays on a shower-by-shower basis. In the framework of the upgrade, called AugerPrime, the 1660 water-Cherenkov detectors of the surface array are equipped with plastic scintillators and radio antennas, allowing us to enhance the composition sensitivity. To accommodate new detectors and to increase experimental capabilities, the electronics is also upgraded. This includes better timing with up-to-date GPS receivers, higher sampling frequency, increased dynamic range, and more powerful local processing of the data. In this paper, the design characteristics of the new electronics and the enhanced dynamic range will be described. The manufacturing and test processes will be outlined and the test results will be discussed. The calibration of the SD detector and various performance parameters obtained from the analysis of the first commissioning data will also be presented. △ Less

Submitted 8 October, 2023; v1 submitted 12 September, 2023; originally announced September 2023.

Forecasting Large Realized Covariance Matrices: The Benefits of Factor Models and Shrinkage

Authors: Rafael Alves, Diego S. de Brito, Marcelo C. Medeiros, Ruy M. Ribeiro

Abstract: We propose a model to forecast large realized covariance matrices of returns, applying it to the constituents of the S\&P 500 daily. To address the curse of dimensionality, we decompose the return covariance matrix using standard firm-level factors (e.g., size, value, and profitability) and use sectoral restrictions in the residual covariance matrix. This restricted model is then estimated using v… ▽ More We propose a model to forecast large realized covariance matrices of returns, applying it to the constituents of the S\&P 500 daily. To address the curse of dimensionality, we decompose the return covariance matrix using standard firm-level factors (e.g., size, value, and profitability) and use sectoral restrictions in the residual covariance matrix. This restricted model is then estimated using vector heterogeneous autoregressive (VHAR) models with the least absolute shrinkage and selection operator (LASSO). Our methodology improves forecasting precision relative to standard benchmarks and leads to better estimates of minimum variance portfolios. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Machine Learning based tool for CMS RPC currents quality monitoring

Authors: E. Shumka, A. Samalan, M. Tytgat, M. El Sawy, G. A. Alves, F. Marujo, E. A. Coelho, E. M. Da Costa, H. Nogima, A. Santoro, S. Fonseca De Souza, D. De Jesus Damiao, M. Thiel, K. Mota Amarilo, M. Barroso Ferreira Filho, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov , et al. (83 additional authors not shown)

Abstract: The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m… ▽ More The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future. △ Less

Submitted 6 February, 2023; originally announced February 2023.

RPC based tracking system at CERN GIF++ facility

Authors: K. Mota Amarilo, A. Samalan, M. Tytgat, M. El Sawy, G. A. Alves, F. Marujo, E. A. Coelho, E. M. Da Costa, H. Nogima, A. Santoro, S. Fonseca De Souza, D. De Jesus Damiao, M. Thiel, M. Barroso Ferreira Filho, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov , et al. (83 additional authors not shown)

Abstract: With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system… ▽ More With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 12 pages, 9 figures. Contribution to XVI Workshop on Resistive Plate Chambers and Related Detectors (RPC2022), September 26-30 2022. Submitted to Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

Constraining the anomalous coupling of gravitational waves with double pulsar

Authors: Diego Santos de Jesus, Hermano Velten, Federico Piazza

Abstract: We revisit the decay of the orbital period in binary systems that occurs due to the emission of gravitational waves in the context of modified gravity models where the coupling $G_{gw}$ between matter and on-shell gravitons is allowed to differ from the Newton constant $G_N$. Using the most precise orbital parameters of binary pulsars, those of the Double Pulsar, we constrain the ratio… ▽ More We revisit the decay of the orbital period in binary systems that occurs due to the emission of gravitational waves in the context of modified gravity models where the coupling $G_{gw}$ between matter and on-shell gravitons is allowed to differ from the Newton constant $G_N$. Using the most precise orbital parameters of binary pulsars, those of the Double Pulsar, we constrain the ratio $G_{gw}/G_N$ to the level of $10^{-4}$, improving by two orders of magnitude the present bound on this quantity. △ Less

Submitted 19 November, 2022; originally announced November 2022.

Comments: 5 pages, 2 figures

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Acoustic Full Waveform Inversion with Hamiltonian Monte Carlo Method

Authors: Paulo D. S. de Lima, Gilberto Corso, Mauro S. Ferreira, João M. de Araújo

Abstract: Full-Waveform Inversion (FWI) is a high-resolution technique used in geophysics to evaluate the physical parameters and construct subsurface models in a noisy and limited data scenario. The ill-posed nature of the FWI turns this a challenging problem since more than one model can match the observations. In a probabilistic way, solving the FWI problem demands efficient sampling techniques to infer… ▽ More Full-Waveform Inversion (FWI) is a high-resolution technique used in geophysics to evaluate the physical parameters and construct subsurface models in a noisy and limited data scenario. The ill-posed nature of the FWI turns this a challenging problem since more than one model can match the observations. In a probabilistic way, solving the FWI problem demands efficient sampling techniques to infer information on parameters and to estimate the uncertainties in high-dimensional model spaces. We investigate the feasibility of applying the Hamiltonian Monte Carlo (HMC) method in the acoustic FWI by a reflection setup containing different noise level data. We propose a new strategy for tuning the mass matrix based on the acquisition geometry of the seismic survey. Our methodology significantly improves the ability of the HMC method in reconstructing reasonable seismic models with affordable computational efforts. △ Less

Submitted 31 January, 2023; v1 submitted 1 June, 2022; originally announced June 2022.

Comments: 10 pages, 6 figures

X-point and divertor filament dynamics from Gas Puff Imaging on TCV

Authors: Curdin Wüthrich, Christian Theiler, Nicola Offeddu, Davide Galassi, Diego Sales de Oliveira, Basil Duval, Olivier Février, Theodore Golfinopoulos, Woonghee Han, Earl Marmar, Jim Terry, Cedric Tsui

Abstract: A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of inte… ▽ More A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of intermittent filaments. Strongly elongated filaments, just above the X-point and in the divertor far-SOL, show a good consistency in shape and dynamics with field-line tracing from filaments at the outboard midplane, highlighting their connection. In the near-SOL of the outer divertor leg, shortlived, high frequency and more circular (diameter $\sim$15 sound Larmour radii) filaments are observed. These divertor-localised filaments appear born radially at the position of maximum density and display a radially outward motion with velocity $\approx$400\,m/s that is comparable to radial velocities of upstream-connected filaments. Conversely, in these discharges ($B\times\nabla B$ pointing away from the divertor), these divertor filaments' poloidal velocities differ strongly from those of upstream-connected filaments. The importance of divertor-localised filaments upon radial transport and profile broadening is explored using filament statistics and in-situ kinetic profile measurements along the divertor leg. This provides evidence that these filaments contribute significantly to electron density profile broadening in the divertor. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Comments: This is the version of the article before peer review or editing, as submitted by an author to IOPScience Nuclear Fusion. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. 15 pages, 15 figures

Mars: new insights and unresolved questions

Authors: Hitesh G. Changela, Elias Chatzitheodoridis, Andre Antunes, David Beaty, Kristian Bouw, John C. Bridges, Klara Anna Capova, Charles S. Cockell, Catharine A. Conley, Ekaterina Dadachova, Tiffany D. Dallas Stefaan de Mey, Chuanfei Dong Alex Ellery, Martin Ferus, Bernard Foing, Xiaohui Fu, Kazuhisa Fujita, Yangtin Lin, Sohan Jheeta, Leon J. Hicks, Sen Hu, Akos Kereszturi, Alexandros Krassakis, Yang Liu, Juergen Oberst, Joe Michalski , et al. (11 additional authors not shown)

Abstract: Mars exploration motivates the search for extraterrestrial life, the development of space technologies, and the design of human missions and habitations. Here we seek new insights and pose unresolved questions relating to the natural history of Mars, habitability, robotic and human exploration, planetary protection, and the impacts on human society. Key observations and findings include:(1)high es… ▽ More Mars exploration motivates the search for extraterrestrial life, the development of space technologies, and the design of human missions and habitations. Here we seek new insights and pose unresolved questions relating to the natural history of Mars, habitability, robotic and human exploration, planetary protection, and the impacts on human society. Key observations and findings include:(1)high escape rates of early Mars' atmosphere, including loss of water, impact present-day habitability;(2)putative fossils on Mars will likely be ambiguous biomarkers for life;(3)microbial contamination resulting from human habitation is unavoidable;(4)based on Mars' current planetary protection category, robotic payload(s) should characterize the local martian environment for any life-forms prior to human habitation. Some of the outstanding questions are:(1)which interpretation of the hemispheric dichotomy of the planet is correct;(2)to what degree did deep-penetrating faults transport subsurface liquids to Mars' surface;(3)in what abundance are carbonates formed by atmospheric processes;(4)what properties of martian meteorites could be used to constrain their source locations;(5)the origin(s) of organic macromolecules;(6)was/is Mars inhabited;(7)how can missions designed to uncover microbial activity in the subsurface eliminate potential false positives caused by microbial contaminants from Earth;(8)how can we ensure that humans and microbes form a stable and benign biosphere;(9)should humans relate to putative extraterrestrial life from a biocentric viewpoint (preservation of all biology), or anthropocentric viewpoint of expanding habitation of space? Studies of Mars' evolution can shed light on the habitability of extrasolar planets. In addition, Mars exploration can drive future policy developments and confirm (or put into question) the feasibility and/or extent of human habitability of space. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

Authors: A. Samalan, M. Tytgat, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. DaCosta, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal, A. Cabrera , et al. (86 additional authors not shown)

Abstract: During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solen… ▽ More During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solenoid (CMS) experiment. To ensure a highly performing muon system for this period, several upgrades of the Resistive Plate Chamber (RPC) system of the CMS are currently being implemented. These include the replacement of the readout system for the present system, and the installation of two new RPC stations with improved chamber and front-end electronics designs. The current overall status of this CMS RPC upgrade project is presented. △ Less

Submitted 2 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Counting and Locating High-Density Objects Using Convolutional Neural Network

Authors: Mauro dos Santos de Arruda, Lucas Prado Osco, Plabiany Rodrigo Acosta, Diogo Nunes Gonçalves, José Marcato Junior, Ana Paula Marques Ramos, Edson Takashi Matsubara, Zhipeng Luo, Jonathan Li, Jonathan de Andrade Silva, Wesley Nunes Gonçalves

Abstract: This paper presents a Convolutional Neural Network (CNN) approach for counting and locating objects in high-density imagery. To the best of our knowledge, this is the first object counting and locating method based on a feature map enhancement and a Multi-Stage Refinement of the confidence map. The proposed method was evaluated in two counting datasets: tree and car. For the tree dataset, our meth… ▽ More This paper presents a Convolutional Neural Network (CNN) approach for counting and locating objects in high-density imagery. To the best of our knowledge, this is the first object counting and locating method based on a feature map enhancement and a Multi-Stage Refinement of the confidence map. The proposed method was evaluated in two counting datasets: tree and car. For the tree dataset, our method returned a mean absolute error (MAE) of 2.05, a root-mean-squared error (RMSE) of 2.87 and a coefficient of determination (R$^2$) of 0.986. For the car dataset (CARPK and PUCPR+), our method was superior to state-of-the-art methods. In the these datasets, our approach achieved an MAE of 4.45 and 3.16, an RMSE of 6.18 and 4.39, and an R$^2$ of 0.975 and 0.999, respectively. The proposed method is suitable for dealing with high object-density, returning a state-of-the-art performance for counting and locating objects. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 15 pages, 10 figures, 8 tables

MSC Class: 68T07 ACM Class: I.2.1

Journal ref: Expert Systems with Applications, 2022

A Deep Learning Approach Based on Graphs to Detect Plantation Lines

Authors: Diogo Nunes Gonçalves, Mauro dos Santos de Arruda, Hemerson Pistori, Vanessa Jordão Marcato Fernandes, Ana Paula Marques Ramos, Danielle Elis Garcia Furuya, Lucas Prado Osco, Hongjie He, Jonathan Li, José Marcato Junior, Wesley Nunes Gonçalves

Abstract: Deep learning-based networks are among the most prominent methods to learn linear patterns and extract this type of information from diverse imagery conditions. Here, we propose a deep learning approach based on graphs to detect plantation lines in UAV-based RGB imagery presenting a challenging scenario containing spaced plants. The first module of our method extracts a feature map throughout the… ▽ More Deep learning-based networks are among the most prominent methods to learn linear patterns and extract this type of information from diverse imagery conditions. Here, we propose a deep learning approach based on graphs to detect plantation lines in UAV-based RGB imagery presenting a challenging scenario containing spaced plants. The first module of our method extracts a feature map throughout the backbone, which consists of the initial layers of the VGG16. This feature map is used as an input to the Knowledge Estimation Module (KEM), organized in three concatenated branches for detecting 1) the plant positions, 2) the plantation lines, and 3) for the displacement vectors between the plants. A graph modeling is applied considering each plant position on the image as vertices, and edges are formed between two vertices (i.e. plants). Finally, the edge is classified as pertaining to a certain plantation line based on three probabilities (higher than 0.5): i) in visual features obtained from the backbone; ii) a chance that the edge pixels belong to a line, from the KEM step; and iii) an alignment of the displacement vectors with the edge, also from KEM. Experiments were conducted in corn plantations with different growth stages and patterns with aerial RGB imagery. A total of 564 patches with 256 x 256 pixels were used and randomly divided into training, validation, and testing sets in a proportion of 60\%, 20\%, and 20\%, respectively. The proposed method was compared against state-of-the-art deep learning methods, and achieved superior performance with a significant margin, returning precision, recall, and F1-score of 98.7\%, 91.9\%, and 95.1\%, respectively. This approach is useful in extracting lines with spaced plantation patterns and could be implemented in scenarios where plantation gaps occur, generating lines with few-to-none interruptions. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Comments: 19 pages, 11 figures, 4 tables

MSC Class: 68Txx

Potential energy surface study of X@Si$_{32}$X$^-_{44}$(X=Cl, Br) clusters to decipher the stabilization process of Si$_{20}$ fullerene

Authors: Deb Sankar De, Santanu Saha, Stefan Goedecker

Abstract: Efforts toward stabilization of the Si$_{20}$ fullerene through different schemes have failed despite several theoretical predictions. However, recently Tillmann {\it et. al.} succeeded to stabilize the Si$_{20}$ fullerene through exohedral decoration with eight Cl substituents and twelve SiCl$_3$ groups on the surface and enclosing Cl$^-$ ion. A deeper understanding on what factors lead to stabil… ▽ More Efforts toward stabilization of the Si$_{20}$ fullerene through different schemes have failed despite several theoretical predictions. However, recently Tillmann {\it et. al.} succeeded to stabilize the Si$_{20}$ fullerene through exohedral decoration with eight Cl substituents and twelve SiCl$_3$ groups on the surface and enclosing Cl$^-$ ion. A deeper understanding on what factors lead to stabilization will open the path for stabilizing other systems of interest. Here, we employ the minima hopping method within density functional theory to understand the potential energy surface. The study shows that the exo-endo halide decoration of the cage alters the glassy nature of the potential energy surface of pure cage to structure seeker. Further analysis of different properties of the global minima, reveal that the extra electron instead of residing on the central encapsulated atom in the cage, it is distributed on the cage and increases the encapsulation energy; thereby stabilizing the system. We also provide estimates of the stability for different kind of exo-endo halide decorations and their feasible realization in experiments. △ Less

Submitted 12 January, 2021; originally announced January 2021.

A CNN Approach to Simultaneously Count Plants and Detect Plantation-Rows from UAV Imagery

Authors: Lucas Prado Osco, Mauro dos Santos de Arruda, Diogo Nunes Gonçalves, Alexandre Dias, Juliana Batistoti, Mauricio de Souza, Felipe David Georges Gomes, Ana Paula Marques Ramos, Lúcio André de Castro Jorge, Veraldo Liesenberg, Jonathan Li, Lingfei Ma, José Marcato Junior, Wesley Nunes Gonçalves

Abstract: In this paper, we propose a novel deep learning method based on a Convolutional Neural Network (CNN) that simultaneously detects and geolocates plantation-rows while counting its plants considering highly-dense plantation configurations. The experimental setup was evaluated in a cornfield with different growth stages and in a Citrus orchard. Both datasets characterize different plant density scena… ▽ More In this paper, we propose a novel deep learning method based on a Convolutional Neural Network (CNN) that simultaneously detects and geolocates plantation-rows while counting its plants considering highly-dense plantation configurations. The experimental setup was evaluated in a cornfield with different growth stages and in a Citrus orchard. Both datasets characterize different plant density scenarios, locations, types of crops, sensors, and dates. A two-branch architecture was implemented in our CNN method, where the information obtained within the plantation-row is updated into the plant detection branch and retro-feed to the row branch; which are then refined by a Multi-Stage Refinement method. In the corn plantation datasets (with both growth phases, young and mature), our approach returned a mean absolute error (MAE) of 6.224 plants per image patch, a mean relative error (MRE) of 0.1038, precision and recall values of 0.856, and 0.905, respectively, and an F-measure equal to 0.876. These results were superior to the results from other deep networks (HRNet, Faster R-CNN, and RetinaNet) evaluated with the same task and dataset. For the plantation-row detection, our approach returned precision, recall, and F-measure scores of 0.913, 0.941, and 0.925, respectively. To test the robustness of our model with a different type of agriculture, we performed the same task in the citrus orchard dataset. It returned an MAE equal to 1.409 citrus-trees per patch, MRE of 0.0615, precision of 0.922, recall of 0.911, and F-measure of 0.965. For citrus plantation-row detection, our approach resulted in precision, recall, and F-measure scores equal to 0.965, 0.970, and 0.964, respectively. The proposed method achieved state-of-the-art performance for counting and geolocating plants and plant-rows in UAV images from different types of crops. △ Less

Submitted 14 February, 2021; v1 submitted 31 December, 2020; originally announced December 2020.

Comments: 27 pages, 12 figures, 9 tables

ACM Class: J.2

Journal ref: ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING 174 (2021) 1-17

Generic spectrum of the weighted Laplacian operator on Cayley graphs

Authors: Cristian F. Coletti, Lucas R. de Lima, Diego S. de Oliveira, Marcus A. M. Marrocos

Abstract: In this paper, we investigate the spectrum of a class of weighted Laplacians on Cayley graphs and determine under what conditions the corresponding eigenspaces are generically irreducible. Specifically, we analyze the spectrum on left-invariant Cayley graphs endowed with an invariant metric, and we give some criteria for generically irreducible eigenspaces. Additionally, we introduce an operator t… ▽ More In this paper, we investigate the spectrum of a class of weighted Laplacians on Cayley graphs and determine under what conditions the corresponding eigenspaces are generically irreducible. Specifically, we analyze the spectrum on left-invariant Cayley graphs endowed with an invariant metric, and we give some criteria for generically irreducible eigenspaces. Additionally, we introduce an operator that is comparable to the Laplacian and show that the same criterion holds. △ Less

Submitted 17 May, 2024; v1 submitted 16 September, 2020; originally announced September 2020.

Comments: 18 pages, 2 figures; typos corrected

MSC Class: 05C50; 47A75; 47A55

Journal ref: Lett Math Phys 114, 75 (2024)

Maximum volume simplex method for automatic selection and classification of atomic environments and environment descriptor compression

Authors: Behnam Parsaeifard, Daniele Tomerini, Deb Sankar De, Stefan Goedecker

Abstract: Fingerprint distances, which measure the similarity of atomic environments, are commonly calculated from atomic environment fingerprint vectors. In this work we present the simplex method which can perform the inverse operation, i.e. calculating fingerprint vectors from fingerprint distances. The fingerprint vectors found in this way point to the corners of a simplex. For a large data set of finge… ▽ More Fingerprint distances, which measure the similarity of atomic environments, are commonly calculated from atomic environment fingerprint vectors. In this work we present the simplex method which can perform the inverse operation, i.e. calculating fingerprint vectors from fingerprint distances. The fingerprint vectors found in this way point to the corners of a simplex. For a large data set of fingerprints, we can find a particular largest volume simplex, whose dimension gives the effective dimension of the fingerprint vector space. We show that the corners of this simplex correspond to landmark environments that can by used in a fully automatic way to analyse structures. In this way we can for instance detect atoms in grain boundaries or on edges of carbon flakes without any human input about the expected environment. By projecting fingerprints on the largest volume simplex we can also obtain fingerprint vectors that are considerably shorter than the original ones but whose information content is not significantly reduced. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Comments: 10 pages, 7 figures

An assessment of the structural resolution of various fingerprints commonly used in machine learning

Authors: Behnam Parsaeifard, Deb Sankar De, Anders S. Christensen, Felix A. Faber, Emir Kocer, Sandip De, Joerg Behler, Anatole von Lilienfeld, Stefan Goedecker

Abstract: Atomic environment fingerprints are widely used in computational materials science, from machine learning potentials to the quantification of similarities between atomic configurations. Many approaches to the construction of such fingerprints, also called structural descriptors, have been proposed. In this work, we compare the performance of fingerprints based on the Overlap Matrix(OM), the Smooth… ▽ More Atomic environment fingerprints are widely used in computational materials science, from machine learning potentials to the quantification of similarities between atomic configurations. Many approaches to the construction of such fingerprints, also called structural descriptors, have been proposed. In this work, we compare the performance of fingerprints based on the Overlap Matrix(OM), the Smooth Overlap of Atomic Positions (SOAP), Behler-Parrinello atom-centered symmetry functions (ACSF), modified Behler-Parrinello symmetry functions (MBSF) used in the ANI-1ccx potential and the Faber-Christensen-Huang-Lilienfeld (FCHL) fingerprint under various aspects. We study their ability to resolve differences in local environments and in particular examine whether there are certain atomic movements that leave the fingerprints exactly or nearly invariant. For this purpose, we introduce a sensitivity matrix whose eigenvalues quantify the effect of atomic displacement modes on the fingerprint. Further, we check whether these displacements correlate with the variation of localized physical quantities such as forces. Finally, we extend our examination to the correlation between molecular fingerprints obtained from the atomic fingerprints and global quantities of entire molecules. △ Less

Submitted 7 August, 2020; originally announced August 2020.

Comments: 18 pages, 11 figures

Journal ref: Machine Learning: Science and Technology (2020)

CMS RPC Background -- Studies and Measurements

Authors: R. Hadjiiska, A. Samalan, M. Tytgat, N. Zaganidis, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. Da Costa, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal , et al. (84 additional authors not shown)

Abstract: The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd… ▽ More The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well. △ Less

Submitted 13 December, 2020; v1 submitted 26 May, 2020; originally announced May 2020.

Comments: 6 pages, Conference proceeding for the 2020 Resistive Plate Chambers and Related Detectors. Minor revision of the report, the results remain unchanged. Three new plots are added and some details were explained better

Effect of pH on the complex coacervation and on the formation of layers of sodium alginate and PDADMAC

Authors: Bruno dos Santos de Macedo, Tamiris de Almeida, Raphael da Costa Cruz, Annibal Duarte Pereira Netto, Ladário da Silva, Jean-François Berret, Letícia Vitorazi

Abstract: In this study, we investigated the thermodynamic features of a system based on oppositely charged polyelectrolytes, sodium alginate, and poly(diallyldimethylammonium chloride) (PDADMAC) at different pH values. Additionally, a comparison of the effects of the thermodynamic parameters on the growth of the layers based on the same polymers is presented. For this investigation, different techniques we… ▽ More In this study, we investigated the thermodynamic features of a system based on oppositely charged polyelectrolytes, sodium alginate, and poly(diallyldimethylammonium chloride) (PDADMAC) at different pH values. Additionally, a comparison of the effects of the thermodynamic parameters on the growth of the layers based on the same polymers is presented. For this investigation, different techniques were combined to compare results from the association in solution and co-assembled layers at the silicon surface. Dynamic light scattering (DLS) and isothermal titration calorimetry (ITC) were used for studies in solution, and the layer-by-layer technique was employed for the preparation of the polymer layers. Ellipsometry and atomic force microscopy (AFM) were used to characterize the layer thickness growth as a function of the solution pH, and interferometric confocal microscopy was employed to analyze the topography and roughness of the films. The layers grown for the PDADMAC/sodium alginate system demonstrated pH sensitivity with either linear or exponential behavior, depending on the pH values of the polyelectrolyte solutions. The layer thicknesses measured using ellipsometry and AFM data were in good agreement. Additionally, a pH influence on the roughness and topography of the films was observed. Films from basic dipping solutions resulted in surfaces that were more homogeneous with less roughness; in contrast, films with more layers and those formed in a low-pH dipping solution were rougher and less homogeneous. △ Less

Submitted 13 February, 2020; originally announced February 2020.

Comments: 30 pages 9 figures, 2 tables

Journal ref: Langmuir 36 (10) 2510 - 2523 (2020)

GeoSES -- um Índice Socioeconômico para Estudos de Saúde no Brasil

Authors: Ligia Vizeu Barrozo, Michel Fornaciali, Carmen Diva Saldiva de André, Guilherme Augusto Zimeo Morais, Giselle Mansur, William Cabral-Miranda, João Ricardo Sato, Edson Amaro Júnior

Abstract: Objective: to define an index that summarizes the main dimensions of the socioeconomic context for research purposes, evaluation and monitoring health inequalities. Methods: the index was created from the 2010 Brazilian Demographic Census, whose variables selection was guided by theoretical references for health studies, including seven socioeconomic dimensions: education, mobility, poverty, wealt… ▽ More Objective: to define an index that summarizes the main dimensions of the socioeconomic context for research purposes, evaluation and monitoring health inequalities. Methods: the index was created from the 2010 Brazilian Demographic Census, whose variables selection was guided by theoretical references for health studies, including seven socioeconomic dimensions: education, mobility, poverty, wealth, income, segregation and deprivation of resources and services. The index was developed using principal component analysis, and was evaluated for its construct, content and applicability components. Results: GeoSES-BR dimensions showed good association with HDI-M (above 0.85). The model with the poverty dimension best explained the relative risk of avoidable cause mortality in Brazil. In the intraurban scale, the model with GeoSES-IM was the one that best explained the relative risk of mortality from circulatory system diseases. Conclusion: GeoSES showed significant explanatory potential in the studied scales. △ Less

Submitted 9 October, 2019; originally announced October 2019.

Comments: in Portuguese

Finding reaction pathways with optimal atomic index mappings

Authors: Deb Sankar De, Marco Krummenacher, Bastian Schaefer, Stefan Goedecker

Abstract: Finding complex reaction and transformation pathways, involving many intermediate states, is in general not possible on the DFT level with existing simulation methods due to the very large number of required energy and force evaluations. This is due to a large extent to the fact that for complex reactions, it is not possible to determine which atom in the educt is mapped onto which atom in the pro… ▽ More Finding complex reaction and transformation pathways, involving many intermediate states, is in general not possible on the DFT level with existing simulation methods due to the very large number of required energy and force evaluations. This is due to a large extent to the fact that for complex reactions, it is not possible to determine which atom in the educt is mapped onto which atom in the product. Trying out all possible atomic index mappings is not feasible because of the factorial increase in the number of possible mappings. By using a penalty function that is invariant under index permutations, we can bias the potential energy surface in such a way that it obtains the characteristics of a structure seeker whose global minimum is the product. By performing a Minima Hopping based global optimization on this biased potential energy surface we can rapidly find intermediate states that lead into the global minimum. Based on this information we can then extract the full reaction pathway. We first demonstrate for a benchmark system, namely LJ38 that our method allows to preferentially find intermediate states that are relevant for the lowest energy reaction pathway and that we, therefore, need a much smaller number of intermediate states than previous methods to find the lowest energy reaction pathway. Finally, we apply the method to two real systems, C60 and C20H20 and show that the found reaction pathway contains valuable information on how the system can be synthesized. △ Less

Submitted 14 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. Lett. 123, 206102 (2019)

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

High Rate RPC detector for LHC

Authors: F. Lagarde, A. Fagot, M. Gul, C. Roskas, M. Tytgat, N. Zaganidis, S. Fonseca De Souza, A. Santoro, F. Torres Da Silva De Araujo, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, D. Han, W. Yi, C. Avila, A. Cabrera , et al. (77 additional authors not shown)

Abstract: The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\ {\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The… ▽ More The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\ {\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The region with high pseudo rapidity ($η$) region of the forward muon spectrometer ($2.4 > |η| > 1.9$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz cm$^{-1}$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The current CMS RPC technology cannot sustain the expected background level. A new generation of Glass-RPC (GRPC) using low-resistivity glass was proposed to equip the two most far away of the four high $η$ muon stations of CMS. In their single-gap version they can stand rates of few kHz cm$^{-1}$. Their time precision of about 1 ns can allow to reduce the noise contribution leading to an improvement of the trigger rate. The proposed design for large size chambers is examined and some preliminary results obtained during beam tests at Gamma Irradiation Facility (GIF++) and Super Proton Synchrotron (SPS) at CERN are shown. They were performed to validate the capability of such detectors to support high irradiation environment with limited consequence on their efficiency. △ Less

Submitted 16 July, 2018; originally announced July 2018.

New constraints on oscillation parameters from $ν_e$ appearance and $ν_μ$ disappearance in the NOvA experiment

Authors: M. A. Acero, P. Adamson, L. Aliaga T. Alion, V. Allakhverdian, N. Anfimov A. Antoshkin, E. Arrieta-Diaz, A. Aurisano A. Back, C. Backhouse, M. Baird N. Balashov, B. A. Bambah, K. Bays B. Behera, S. Bending, R. Bernstein V. Bhatnagar, B. Bhuyan, J. Bian T. Blackburn, J. Blair, A. Bolshakova P. Bour, C. Bromberg, J. Brown N. Buchanan, A. Butkevich, V. Bychkov M. Campbell, T. J. Carroll, E. Catano-Mur A. Cedeno, S. Childress, B. C. Choudhary B. Chowdhury , et al. (104 additional authors not shown)

Abstract: We present updated results from the NOvA experiment for $ν_μ\rightarrowν_μ$ and $ν_μ\rightarrowν_e$ oscillations from an exposure of $8.85\times10^{20}$ protons on target, which represents an increase of 46% compared to our previous publication. The results utilize significant improvements in both the simulations and analysis of the data. A joint fit to the data for $ν_μ$ disappearance and $ν_e$ a… ▽ More We present updated results from the NOvA experiment for $ν_μ\rightarrowν_μ$ and $ν_μ\rightarrowν_e$ oscillations from an exposure of $8.85\times10^{20}$ protons on target, which represents an increase of 46% compared to our previous publication. The results utilize significant improvements in both the simulations and analysis of the data. A joint fit to the data for $ν_μ$ disappearance and $ν_e$ appearance gives the best fit point as normal mass hierarchy, $Δm^2_{32} = 2.44\times 10^{-3}{{\rm eV}^2}/c^4$, $\sin^2θ_{23} = 0.56$, and $δ_{CP} = 1.21π$. The 68.3% confidence intervals in the normal mass hierarchy are $Δm^2_{32} \in [2.37,2.52]\times 10^{-3}{{\rm eV}^2}/c^4$, $\sin^2θ_{23} \in [0.43,0.51] \cup [0.52,0.60]$, and $δ_{CP} \in [0,0.12π] \cup [0.91π,2π]$. The inverted mass hierarchy is disfavored at the 95% confidence level for all choices of the other oscillation parameters. △ Less

Submitted 6 August, 2018; v1 submitted 31 May, 2018; originally announced June 2018.

Journal ref: Phys. Rev. D 98, 032012 (2018)

Comment on the stability of decorated C 48 B 12 heterofullerene

Authors: Deb Sankar De, Santanu Saha, Luigi Genovese, Stefan Goedecker

Abstract: A good hydrogen storage material should adsorb hydrogen in high concentrations and with optimal binding energies. Numerous mixed carbon boron fullerenes which are decorated with metal atoms were previously constructed by hand and proposed as a promising material in this context. We present a fully ab-initio, unbiased structure search in the configurational space of decorated C48B12 and find that m… ▽ More A good hydrogen storage material should adsorb hydrogen in high concentrations and with optimal binding energies. Numerous mixed carbon boron fullerenes which are decorated with metal atoms were previously constructed by hand and proposed as a promising material in this context. We present a fully ab-initio, unbiased structure search in the configurational space of decorated C48B12 and find that most of the hitherto postulated ground state structures are not ground states. We determine the energetically lowest configurations for Be, Ca, Li and Sc decorated C48B12 clusters. △ Less

Submitted 11 February, 2018; originally announced February 2018.

Antiferromagnetism and competing charge instabilities of electrons in strained graphene from Coulomb interactions

Authors: David Sánchez de la Peña, Julian Lichtenstein, Carsten Honerkamp, Michael M. Scherer

Abstract: We study the quantum many-body ground states of electrons on the half-filled honeycomb lattice with short- and long-ranged density-density interactions as a model for graphene. To this end, we employ the recently developed truncated-unity functional renormalization group (TU-fRG) approach which allows for a high resolution of the interaction vertex' wavevector dependence. We connect to previous la… ▽ More We study the quantum many-body ground states of electrons on the half-filled honeycomb lattice with short- and long-ranged density-density interactions as a model for graphene. To this end, we employ the recently developed truncated-unity functional renormalization group (TU-fRG) approach which allows for a high resolution of the interaction vertex' wavevector dependence. We connect to previous lattice quantum Monte Carlo (QMC) results which predict a stabilization of the semimetallic phase for realistic \emph{ab initio} interaction parameters and confirm that the application of a finite biaxial strain can induce a quantum phase transition towards an ordered ground state. In contrast to lattice QMC simulations, the TU-fRG is not limited in the choice of tight-binding and interaction parameters to avoid the occurrence of a sign problem. Therefore, we also investigate a range of parameters relevant to the realistic graphene material which are not accessible by numerically exact methods. Although a plethora of charge density waves arise under medium-range interactions, we find the antiferromagnetic spin-density wave to be the prevailing instability for long-range interactions. We further explore the impact of an extended tight-binding Hamiltonian with second-nearest neighbor hopping and a finite chemical potential for a more accurate description of the band structure of graphene's $p_z$ electrons. △ Less

Submitted 5 October, 2017; v1 submitted 7 September, 2017; originally announced September 2017.

Comments: 17 pages, 12 figures

Journal ref: Phys. Rev. B 96, 205155 (2017)