-
Quasi-free-standing AA-stacked bilayer graphene induced by calcium intercalation of the graphene-silicon carbide interface
Authors:
Antonija Grubišić-Čabo,
Jimmy C. Kotsakidis,
Yuefeng Yin,
Anton Tadich,
Matthew Haldon,
Sean Solari,
John Riley,
Eric Huwald,
Kevin M. Daniels,
Rachael L. Myers-Ward,
Mark T. Edmonds,
Nikhil Medhekar,
D. Kurt Gaskill,
Michael S. Fuhrer
Abstract:
We study quasi-freestanding bilayer graphene on silicon carbide intercalated by calcium. The intercalation, and subsequent changes to the system, were investigated by low-energy electron diffraction, angle-resolved photoemission spectroscopy (ARPES) and density-functional theory (DFT). Calcium is found to intercalate only at the graphene-SiC interface, completely displacing the hydrogen terminatin…
▽ More
We study quasi-freestanding bilayer graphene on silicon carbide intercalated by calcium. The intercalation, and subsequent changes to the system, were investigated by low-energy electron diffraction, angle-resolved photoemission spectroscopy (ARPES) and density-functional theory (DFT). Calcium is found to intercalate only at the graphene-SiC interface, completely displacing the hydrogen terminating SiC. As a consequence, the system becomes highly n-doped. Comparison to DFT calculations shows that the band dispersion, as determined by ARPES, deviates from the band structure expected for Bernal-stacked bilayer graphene. Instead, the electronic structure closely matches AA-stacked bilayer graphene on Ca-terminated SiC, indicating a spontaneous transition from AB- to AA-stacked bilayer graphene following calcium intercalation of the underlying graphene-SiC interface.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
Increasing the Rate of Magnesium Intercalation Underneath Epitaxial Graphene on 6H-SiC(0001)
Authors:
Jimmy C. Kotsakidis,
Marc Currie,
Antonija Grubišić-Čabo,
Anton Tadich,
Rachael L. Myers-Ward,
Matthew DeJarld,
Kevin M. Daniels,
Chang Liu,
Mark T. Edmonds,
Amadeo L. Vázquez de Parga,
Michael S. Fuhrer,
D. Kurt Gaskill
Abstract:
Magnesium intercalated 'quasi-freestanding' bilayer graphene on 6H-SiC(0001) (Mg-QFSBLG) has many favorable properties (e.g., highly n-type doped, relatively stable in ambient conditions). However, intercalation of Mg underneath monolayer graphene is challenging, requiring multiple intercalation steps. Here, we overcome these challenges and subsequently increase the rate of Mg intercalation by las…
▽ More
Magnesium intercalated 'quasi-freestanding' bilayer graphene on 6H-SiC(0001) (Mg-QFSBLG) has many favorable properties (e.g., highly n-type doped, relatively stable in ambient conditions). However, intercalation of Mg underneath monolayer graphene is challenging, requiring multiple intercalation steps. Here, we overcome these challenges and subsequently increase the rate of Mg intercalation by laser patterning (ablating) the graphene to form micron-sized discontinuities. We then use low energy electron diffraction to verify Mg-intercalation and conversion to Mg-QFSBLG, and X-ray photoelectron spectroscopy to determine the Mg intercalation rate for patterned and non-patterned samples. By modeling Mg intercalation with the Verhulst equation, we find that the intercalation rate increase for the patterned sample is 4.5$\pm$1.7. Since the edge length of the patterned sample is $\approx$5.2 times that of the non-patterned sample, the model implies that the increased intercalation rate is proportional to the increase in edge length. Moreover, Mg intercalation likely begins at graphene discontinuities in pristine samples (not step edges or flat terraces), where the 2D-like crystal growth of Mg-silicide proceeds. Our laser patterning technique may enable the rapid intercalation of other atomic or molecular species, thereby expanding upon the library of intercalants used to modify the characteristics of graphene, or other 2D materials and heterostructures.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Strong transient magnetic fields induced by THz-driven plasmons in graphene disks
Authors:
Jeong Woo Han,
Pavlo Sai,
Dmytro But,
Ece Uykur,
Stephan Winnerl,
Gagan Kumar,
Matthew L. Chin,
Rachael L. Myers-Ward,
Matthew T. Dejarld,
Kevin M. Daniels,
Thomas E. Murphy,
Wojciech Knap,
Martin Mittendorff
Abstract:
Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carri…
▽ More
Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carrier concentrations. Plasmon resonances provide new degrees of freedom that can be used to tune or enhance the light-induced magnetic field in engineered metamaterials. Here we employ graphene disks to demonstrate light-induced transient magnetic fields from a plasmonic circular current with extremely high efficiency. The effective magnetic field at the plasmon resonance frequency of the graphene disks (3.5 THz) is evidenced by a strong (~1°) ultrafast Faraday rotation (~ 20 ps). In accordance with reference measurements and simulations, we estimated the strength of the induced magnetic field to be on the order of 0.7 T under a moderate pump fluence of about 440 nJ cm-2.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Magnesium-intercalated graphene on SiC: highly n-doped air-stable bilayer graphene at extreme displacement fields
Authors:
Antonija Grubišić-Čabo,
Jimmy C. Kotsakidis,
Yuefeng Yin,
Anton Tadich,
Matthew Haldon,
Sean Solari,
Iolanda di Bernardo,
Kevin M. Daniels,
John Riley,
Eric Huwald,
Mark T. Edmonds,
Rachael Myers-Ward,
Nikhil V. Medhekar,
D. Kurt Gaskill,
Michael S. Fuhrer
Abstract:
We use angle-resolved photoemission spectroscopy to investigate the electronic structure of bilayer graphene at high n-doping and extreme displacement fields, created by intercalating epitaxial monolayer graphene on silicon carbide with magnesium to form quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide. Angle-resolved photoemission spectroscopy reveals that upon magnesiu…
▽ More
We use angle-resolved photoemission spectroscopy to investigate the electronic structure of bilayer graphene at high n-doping and extreme displacement fields, created by intercalating epitaxial monolayer graphene on silicon carbide with magnesium to form quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide. Angle-resolved photoemission spectroscopy reveals that upon magnesium intercalation, the single massless Dirac band of epitaxial monolayer graphene is transformed into the characteristic massive double-band Dirac spectrum of quasi-freestanding bilayer graphene. Analysis of the spectrum using a simple tight binding model indicates that magnesium intercalation results in an n-type doping of 2.1 $\times$ 10$^{14}$ cm$^{-2}$, creates an extremely high displacement field of 2.6 V/nm, opening a considerable gap of 0.36 eV at the Dirac point. This is further confirmed by density-functional theory calculations for quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide, which show a similar doping level, displacement field and bandgap. Finally, magnesium-intercalated samples are surprisingly robust to ambient conditions; no significant changes in the electronic structure are observed after 30 minutes exposure in air.
△ Less
Submitted 27 August, 2020; v1 submitted 6 May, 2020;
originally announced May 2020.
-
Freestanding n-Doped Graphene via Intercalation of Calcium and Magnesium into the Buffer Layer - SiC(0001) Interface
Authors:
Jimmy C. Kotsakidis,
Antonija Grubišić-Čabo,
Yuefeng Yin,
Anton Tadich,
Rachael L. Myers-Ward,
Matthew Dejarld,
Shojan P. Pavunny,
Marc Currie,
Kevin M. Daniels,
Chang Liu,
Mark T. Edmonds,
Nikhil V. Medhekar,
D. Kurt Gaskill,
Amadeo L. Vazquez de Parga,
Michael S. Fuhrer
Abstract:
The intercalation of epitaxial graphene on SiC(0001) with Ca has been studied extensively, yet precisely where the Ca resides remains elusive. Furthermore, the intercalation of Mg underneath epitaxial graphene on SiC(0001) has not been reported. Here, we use low energy electron diffraction, x-ray photoelectron spectroscopy, secondary electron cut-off photoemission and scanning tunneling microscopy…
▽ More
The intercalation of epitaxial graphene on SiC(0001) with Ca has been studied extensively, yet precisely where the Ca resides remains elusive. Furthermore, the intercalation of Mg underneath epitaxial graphene on SiC(0001) has not been reported. Here, we use low energy electron diffraction, x-ray photoelectron spectroscopy, secondary electron cut-off photoemission and scanning tunneling microscopy to elucidate the physical and electronic structure of both Ca- and Mg-intercalated epitaxial graphene on 6H-SiC(0001). We find that Ca intercalates underneath the buffer layer and bonds to the Si-terminated SiC surface, breaking the C-Si bonds of the buffer layer i.e. 'freestanding' the buffer layer to form Ca-intercalated quasi-freestanding bilayer graphene (Ca-QFSBLG). The situation is similar for the Mg-intercalation of epitaxial graphene on SiC(0001), where an ordered Mg-terminated reconstruction at the SiC surface and Mg bonds to the Si-terminated SiC surface are formed, resulting in Mg-intercalated quasi-freestanding bilayer graphene (Mg-QFSBLG). Ca-intercalation underneath the buffer layer has not been considered in previous studies of Ca-intercalated epitaxial graphene. Furthermore, we find no evidence that either Ca or Mg intercalates between graphene layers. However, we do find that both Ca-QFSBLG and Mg-QFSBLG exhibit very low workfunctions of 3.68 and 3.78 eV, respectively, indicating high n-type doping. Upon exposure to ambient conditions, we find Ca-QFSBLG degrades rapidly, whereas Mg-QFSBLG remains remarkably stable.
△ Less
Submitted 13 July, 2020; v1 submitted 3 April, 2020;
originally announced April 2020.
-
Epitaxial graphene quantum dots for high-performance THz bolometers
Authors:
A. El Fatimy,
R. L. Myers-Ward,
A. K. Boyd,
K. M. Daniels,
D. K. Gaskill,
P. Barbara
Abstract:
Light absorption in graphene causes a large change in electron temperature, due to low electronic heat capacity and weak electron phonon coupling [1-3], making it very attractive as a hot-electron bolometer material. Unfortunately, the weak variation of electrical resistance with temperature has substantially limited the responsivity of graphene bolometers. Here we show that quantum dots of epitax…
▽ More
Light absorption in graphene causes a large change in electron temperature, due to low electronic heat capacity and weak electron phonon coupling [1-3], making it very attractive as a hot-electron bolometer material. Unfortunately, the weak variation of electrical resistance with temperature has substantially limited the responsivity of graphene bolometers. Here we show that quantum dots of epitaxial graphene on SiC exhibit an extraordinarily high variation of resistance with temperature due to quantum confinement, higher than 430 Mohm/K at 2.5 K, leading to responsivities for absorbed THz power above 10^10 V/W. This is five orders of magnitude higher than other types of graphene hot electron bolometers. The high responsivity combined with an extremely low noise-equivalent power, about 0.2 fW/Hz^0.5 at 2.5K, place the performance of graphene quantum dot bolometers well above commercial cooled bolometers. Additionally, these quantum dot bolometers have the potential for superior performance for operation above 77K.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
Hybrid Metal-Graphene Plasmons for Tunable Terahertz Technology
Authors:
Mohammad M. Jadidi,
Andrei B. Sushkov,
Rachael L. Myers-Ward,
Anthony K. Boyd,
Kevin M. Daniels,
D. Kurt Gaskill,
Michael S. Fuhrer,
H. Dennis Drew,
Thomas E. Murphy
Abstract:
Among its many outstanding properties, graphene supports terahertz surface plasma waves -- sub-wavelength charge density oscillations connected with electromagnetic fields that are tightly localized near the surface[1,2]. When these waves are confined to finite-sized graphene, plasmon resonances emerge that are characterized by alternating charge accumulation at the opposing edges of the graphene.…
▽ More
Among its many outstanding properties, graphene supports terahertz surface plasma waves -- sub-wavelength charge density oscillations connected with electromagnetic fields that are tightly localized near the surface[1,2]. When these waves are confined to finite-sized graphene, plasmon resonances emerge that are characterized by alternating charge accumulation at the opposing edges of the graphene. The resonant frequency of such a structure depends on both the size and the surface charge density, and can be electrically tuned throughout the terahertz range by applying a gate voltage[3,4]. The promise of tunable graphene THz plasmonics has yet to be fulfilled, however, because most proposed optoelectronic devices including detectors, filters, and modulators[5-10] desire near total modulation of the absorption or transmission, and require electrical contacts to the graphene -- constraints that are difficult to meet using existing plasmonic structures. We report here a new class of plasmon resonance that occurs in a hybrid graphene-metal structure. The sub-wavelength metal contacts form a capacitive grid for accumulating charge, while the narrow interleaved graphene channels, to first order, serves as a tunable inductive medium, thereby forming a structure that is resonantly-matched to an incident terahertz wave. We experimentally demonstrate resonant absorption near the theoretical maximum in readily-available, large-area graphene, ideal for THz detectors and tunable absorbers. We further predict that the use of high mobility graphene will allow resonant THz transmission near 100%, realizing a tunable THz filter or modulator. The structure is strongly coupled to incident THz radiation, and solves a fundamental problem of how to incorporate a tunable plasmonic channel into a device with electrical contacts.
△ Less
Submitted 10 July, 2015; v1 submitted 18 June, 2015;
originally announced June 2015.
-
Revealing the electronic band structure of trilayer graphene on SiC: An angle-resolved photoemission study
Authors:
Camilla Coletti,
Stiven Forti,
Alessandro Principi,
Konstantin V. Emtsev,
Alexei A. Zakharov,
Kevin M. Daniels,
Biplob K. Daas,
M. V. S. Chandrashekhar,
Thierry Ouisse,
Didier Chaussende,
Allan H. MacDonald,
Marco Polini,
Ulrich Starke
Abstract:
In recent times, trilayer graphene has attracted wide attention owing to its stacking and electric field dependent electronic properties. However, a direct and well-resolved experimental visualization of its band structure has not yet been reported. In this work, we present angle resolved photoemission spectroscopy (ARPES) data which show with high resolution the electronic band structure of trila…
▽ More
In recent times, trilayer graphene has attracted wide attention owing to its stacking and electric field dependent electronic properties. However, a direct and well-resolved experimental visualization of its band structure has not yet been reported. In this work, we present angle resolved photoemission spectroscopy (ARPES) data which show with high resolution the electronic band structure of trilayer graphene obtained on α-SiC(0001) and β-SiC(111) via hydrogen intercalation. Electronic bands obtained from tight-binding calculations are fitted to the experimental data to extract the interatomic hopping parameters for Bernal and rhombohedral stacked trilayers. Low energy electron microscopy (LEEM) measurements demonstrate that the trilayer domains extend over areas of tens of square micrometers, suggesting the feasibility of exploiting this material in electronic and photonic devices. Furthermore, our results suggest that on SiC substrates the occurrence of rhombohedral stacked trilayer is significantly higher than in natural bulk graphite.
△ Less
Submitted 28 February, 2014;
originally announced February 2014.
-
Molecular Gas Adsorption Induced Carrier Transport Studies of Epitaxial Graphene using IR Reflection Spectroscopy
Authors:
B. K. Daas,
W. K. Nomani,
K. M. Daniels,
T. S. Sudarshan,
Goutam Koley,
M. V. S. Chandrashekhar
Abstract:
We investigate molecular adsorption doping by electron withdrawing NO2 and electron donating NH3 on epitaxial graphene grown on C-face SiC substrates. Amperometric measurements show conductance changes upon introduction of molecular adsorbents on epitaxial graphene. Conductance changes are a trade-off between carrier concentration and scattering, and manifest at direct current and optical frequenc…
▽ More
We investigate molecular adsorption doping by electron withdrawing NO2 and electron donating NH3 on epitaxial graphene grown on C-face SiC substrates. Amperometric measurements show conductance changes upon introduction of molecular adsorbents on epitaxial graphene. Conductance changes are a trade-off between carrier concentration and scattering, and manifest at direct current and optical frequencies. We therefore investigate changes in the infrared (IR) reflection spectra to correlate these two frequency domains, as reflectance changes are due to a change of epitaxial graphene (EG) surface conductance. We match theory with experimental IR data and extract changes in carrier concentration and scattering due to gas adsorption. Finally, we separate the intraband and interband scattering contributions to the electronic transport under gas adsorption. The results indicate that, under gas adsorption, the influence of interband scattering cannot be neglected, even at DC.
△ Less
Submitted 23 January, 2012;
originally announced January 2012.
-
Graphene to Graphane: Novel Electrochemical Conversion
Authors:
Kevin M. Daniels,
B. Daas,
R. Zhang,
I. Chowdhury,
A. Obe,
J. Weidner,
C. Williams,
T. S. Sudarshan,
MVS Chandrashekhar
Abstract:
A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to re…
▽ More
A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to react with the exposed graphene. Cyclic voltammetry of the cell revealed the potential of the conversion reaction as well as oxidation and reduction peaks, suggesting the possibility of electrochemically reversible hydrogenation. A sharp increase in D peak in the Raman spectra of EG, increase of D/G ratio, introduction of a peak at ~2930 cm-1 and respective peak shifts as well as a sharp increase in resistance showed the successful hydrogenation of EG. This conversion was distinguished from lattice damage by thermal reversal back to graphene at 1000°C.
△ Less
Submitted 26 October, 2010;
originally announced October 2010.
-
Polariton Enhanced IR Reflection Spectra of Epitaxial Graphene on SiC
Authors:
B. K. Daas,
K. M. Daniels,
T. S. Sudarshan,
M. V. S. Chandrashekhar
Abstract:
We show ~10x polariton-enhanced infrared reflectivity of epitaxial graphene on 4H-SiC, in SiC's restrahlen band (8-10um). By fitting measurements to theory, we extract the thickness, N, in monolayers (ML), momentum scattering time, Fermi level position of graphene and estimate carrier mobility. By showing that 1/root(ns), the carrier concentration/ML, we argue that scattering is dominated by short…
▽ More
We show ~10x polariton-enhanced infrared reflectivity of epitaxial graphene on 4H-SiC, in SiC's restrahlen band (8-10um). By fitting measurements to theory, we extract the thickness, N, in monolayers (ML), momentum scattering time, Fermi level position of graphene and estimate carrier mobility. By showing that 1/root(ns), the carrier concentration/ML, we argue that scattering is dominated by short-range interactions at the SiC/graphene interface. Polariton formation finds application in near-field optical devices such as superlenses.
△ Less
Submitted 27 October, 2010; v1 submitted 19 October, 2010;
originally announced October 2010.
-
Morphology Characterization of Argon-Mediated Epitaxial Graphene on C-face SiC
Authors:
Joseph L. Tedesco,
Glenn G. Jernigan,
James C. Culbertson,
Jennifer K. Hite,
Yang Yang,
Kevin M. Daniels,
Rachael L. Myers-Ward,
Charles R. Eddy, Jr.,
Joshua A. Robinson,
Kathleen A. Trumbull,
Maxwell T. Wetherington,
Paul M. Campbell,
D. Kurt Gaskill
Abstract:
Epitaxial graphene layers were grown on the C-face of 4H- and 6H-SiC using an argon-mediated growth process. Variations in growth temperature and pressure were found to dramatically affect the morphological properties of the layers. The presence of argon during growth slowed the rate of graphene formation on the C-face and led to the observation of islanding. The similarity in the morphology of th…
▽ More
Epitaxial graphene layers were grown on the C-face of 4H- and 6H-SiC using an argon-mediated growth process. Variations in growth temperature and pressure were found to dramatically affect the morphological properties of the layers. The presence of argon during growth slowed the rate of graphene formation on the C-face and led to the observation of islanding. The similarity in the morphology of the islands and continuous films indicated that island nucleation and coalescence is the growth mechanism for C-face graphene.
△ Less
Submitted 28 July, 2010;
originally announced July 2010.
