-
Impact of interface defects on the band alignment and performance of TiO$_2$/MAPI/Cu$_2$O perovskite solar cells
Authors:
Nicolae Filipoiu,
Marina Cuzminschi,
Calin-Andrei Pantis-Simut,
Kristinn Torfason,
Rachel Elizabeth Brophy,
Andrei Manolescu,
Roxana E. Patru,
Cristina Besleaga,
George E. Stan,
Ioana Pintilie,
George Alexandru Nemnes
Abstract:
Optimizing the interfaces in perovskite solar cells (PSCs) is essential for enhancing their performance, improving their stability, and making them commercially viable for large-scale deployment in solar energy harvesting applications. Point defects, like vacancies, have a dual role, as they can inherently provide a proper doping, but they can also reduce the collected current by trap-assisted rec…
▽ More
Optimizing the interfaces in perovskite solar cells (PSCs) is essential for enhancing their performance, improving their stability, and making them commercially viable for large-scale deployment in solar energy harvesting applications. Point defects, like vacancies, have a dual role, as they can inherently provide a proper doping, but they can also reduce the collected current by trap-assisted recombination. Moreover, they can play an active role in ion migration. Using {\it ab initio} density functional theory (DFT) calculations we investigate the changes in the band alignment induced by interfacial vacancy defects in a TiO$_2$/MAPI/Cu$_2$O based PSC. Depending on the type of the vacancy (Ti, Cu, O, Pb, I) in the oxide and perovskite materials, additional doping is superimposed on the already existing background. Their effect on the performance of the PSCs becomes visible, as shown by SCAPS simulations. The most significant impact is observed for $p$ type doping of TiO$_2$ and $n$ type doping of Cu$_2$O, while the effective doping of the perovskite layer affects one of the two interfaces. We discuss these results based on modification of the band structure near the active interfaces and provide further insights concerning the optimization of electron and hole collection.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Electron transporting bilayers for perovskite solar cells: spray coating deposition of c-TiO2/m-SnO2-quantum dots
Authors:
Anca G. Mirea,
Ioana D. Vlaicu,
Sarah Derbali,
Florentina Neatu,
Andrei G. Tomulescu,
Cristina Besleaga,
Monica Enculescu,
Andrei C. Kuncser,
Alexandra C. Iacoban,
Nicolae Filipoiu,
Marina Cuzminschi,
George A. Nemnes,
Andrei Manolescu,
Mihaela Florea,
Ioana Pintilie
Abstract:
Herein we present a comparative study among different mesoporous electron transporter layers (ETLs), namely nanometric m-TiO2, m-SnO2 and m-SnO2 quantum dots (QDs), deposited by spray coating method. The experimental data correlated with the photovoltaic parameters indicate that the SnO2 mesoporous layer obtained from the spray deposition of the in-house prepared QDs solution is the best candidate…
▽ More
Herein we present a comparative study among different mesoporous electron transporter layers (ETLs), namely nanometric m-TiO2, m-SnO2 and m-SnO2 quantum dots (QDs), deposited by spray coating method. The experimental data correlated with the photovoltaic parameters indicate that the SnO2 mesoporous layer obtained from the spray deposition of the in-house prepared QDs solution is the best candidate between the three used mesoporous ETLs. The use of the in-house prepared SnO2 QDs solution presents smaller agglomerates composed of 3 nm NPs resulting in the formation of a thinner, more uniform, and compact mesoporous ETL, compared with the other two ETL solutions. The formamidinium-methylamonium-potassium (FAMA@10K) perovskite deposited on this m-SnO2 QDs ETL presents a lower RMS, more uniformity and, a higher amount of PbI2. Interestingly, this higher concentration for PbI2 seems to enhance the performance of the perovskite solar cells (PSC), compared to the other two mesoporous ETLs. Our work reveals that SnO2 QDs solution can be easily produced in the laboratory and it is more suited for the deposition of the mesoporous ETL when choosing a FAMA@10K configuration perovskite solar cell with power conversion efficiency (PCE) higher than 10%.
△ Less
Submitted 1 July, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
Innovative thermo-solar air heater
Authors:
M Cuzminschi,
R Gherasim,
V Girleanu,
A Zubarev,
I Stamatin
Abstract:
In the present work we elaborate the innovative design of the solar air heater and justify it by a Computational Fluid Dynamics (CFD) simulation, implementing and experimentally testing a sample. We propose to use this device for maintenance of constant ambient conditions for thermal comfort and low energy consumption for indoor environments, inside greenhouses, passive houses, and to protect buil…
▽ More
In the present work we elaborate the innovative design of the solar air heater and justify it by a Computational Fluid Dynamics (CFD) simulation, implementing and experimentally testing a sample. We propose to use this device for maintenance of constant ambient conditions for thermal comfort and low energy consumption for indoor environments, inside greenhouses, passive houses, and to protect buildings against temperature fluctuations. We tested the functionality of our sample of the solar air heater for 50 weeks and obtained an agreement between the results of the numerical simulation, implemented using OpenFOAM (an open source numerical CFD software) and the experimental results.
△ Less
Submitted 18 December, 2017;
originally announced February 2018.
