-
A definition of the background state of the atmosphere using optimal transport
Authors:
Charlie Egan,
John Methven,
David P. Bourne,
Mike J. P. Cullen
Abstract:
The dynamics of atmospheric disturbances are often described in terms of displacements of air parcels relative to their locations in a notional background state. Modified Lagrangian Mean (MLM) states have been proposed by M. E. McIntyre using the Lagrangian conserved variables potential vorticity and potential temperature to label air parcels, thus avoiding the need to calculate trajectories expli…
▽ More
The dynamics of atmospheric disturbances are often described in terms of displacements of air parcels relative to their locations in a notional background state. Modified Lagrangian Mean (MLM) states have been proposed by M. E. McIntyre using the Lagrangian conserved variables potential vorticity and potential temperature to label air parcels, thus avoiding the need to calculate trajectories explicitly. Methven and Berrisford further defined a zonally symmetric MLM state for global atmospheric flow in terms of mass in zonal angular momentum ($z$) and potential temperature ($θ$) coordinates. We prove that for any snapshot of an atmospheric flow in a single hemisphere, there exists a unique energy-minimising MLM state in geophysical coordinates (latitude and pressure). Since the state is an energy minimum, it is suitable for quantification of finite amplitude disturbances and examining atmospheric instability. This state is obtained by solving a free surface problem, which we frame as the minimisation of an optimal transport cost over a class of source measures. The solution consists of a source measure, encoding surface pressure, and an optimal transport map, connecting the distribution of mass in geophysical coordinates to the known distribution of mass in $(z, θ)$. We show that this problem reduces to an optimal transport problem with a known source measure, which has a numerically feasible discretisation. Additionally, our results hold for a large class of cost functions, and generalise analogous results on free surface variants of the semi-geostrophic equations.
△ Less
Submitted 15 April, 2025;
originally announced April 2025.
-
A new implementation of the geometric method for solving the Eady slice equations
Authors:
Charlie P. Egan,
David P. Bourne,
Colin J. Cotter,
Mike J. P. Cullen,
Beatrice Pelloni,
Steven M. Roper,
Mark Wilkinson
Abstract:
We present a new implementation of the geometric method of Cullen & Purser (1984) for solving the semi-geostrophic Eady slice equations which model large scale atmospheric flows and frontogenesis. The geometric method is a Lagrangian discretisation, where the PDE is approximated by a particle system. An important property of the discretisation is that it is energy conserving. We restate the geomet…
▽ More
We present a new implementation of the geometric method of Cullen & Purser (1984) for solving the semi-geostrophic Eady slice equations which model large scale atmospheric flows and frontogenesis. The geometric method is a Lagrangian discretisation, where the PDE is approximated by a particle system. An important property of the discretisation is that it is energy conserving. We restate the geometric method in the language of semi-discrete optimal transport theory and exploit this to develop a fast implementation that combines the latest results from numerical optimal transport theory with a novel adaptive time-stepping scheme. Our results enable a controlled comparison between the Eady-Boussinesq vertical slice equations and their semi-geostrophic approximation. We provide further evidence that weak solutions of the Eady-Boussinesq vertical slice equations converge to weak solutions of the semi-geostrophic Eady slice equations as the Rossby number tends to zero.
△ Less
Submitted 10 November, 2022; v1 submitted 9 March, 2022;
originally announced March 2022.
-
Synthesis and thermal stability of TMD thin films: A comprehensive XPS and Raman study
Authors:
Conor P. Cullen,
Oliver Hartwig,
Cormac Ó Coileáin,
John B. McManus,
Lisanne Peters,
Cansu Ilhan,
Georg S. Duesberg,
Niall McEvoy
Abstract:
Transition metal dichalcogenides (TMDs) have been a core constituent of 2D material research throughout the last decade. Over this time, research focus has progressively shifted from synthesis and fundamental investigations, to exploring their properties for applied research such as electrochemical applications and integration in electrical devices. Due to the rapid pace of development, priority i…
▽ More
Transition metal dichalcogenides (TMDs) have been a core constituent of 2D material research throughout the last decade. Over this time, research focus has progressively shifted from synthesis and fundamental investigations, to exploring their properties for applied research such as electrochemical applications and integration in electrical devices. Due to the rapid pace of development, priority is often given to application-oriented aspects while careful characterisation and analysis of the TMD materials themselves is occasionally neglected. This can be particularly evident for characterisations involving X-ray photoelectron spectroscopy (XPS), where measurement, peak-fitting, and analysis can be complex and nuanced endeavours requiring specific expertise. To improve the availability and accessibility of reference information, here we present a detailed peak-fitted XPS analysis of ten transition metal chalcogenides. The materials were synthesised as large-area thin-films on SiO2 using direct chalcogenisation of pre-deposited metal films. Alongside XPS, the Raman spectra with several excitation wavelengths for each material are also provided. These complementary characterisation methods can provide a more complete understanding of the composition and quality of the material. As material stability is a crucial factor when considering applications, the in-air thermal stability of the TMDs was investigated after several annealing points up to 400 °C. This delivers a trend of evolving XPS and Raman spectra for each material which improves interpretation of their spectra while also indicating their ambient thermal limits. This provides an accessible library and set of guidelines to characterise, compare, and discuss TMD XPS and Raman spectra.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Synthesis and characterisation of thin-film platinum disulfide and platinum sulfide
Authors:
Conor P. Cullen,
Cormac Ó Coileáin,
John B. McManus,
Oliver Hartwig,
David McCloskey,
Georg S. Duesberg,
Niall McEvoy
Abstract:
Group-10 transition metal dichalcogenides (TMDs) are rising in prominence within the highly innovative field of 2D materials. While PtS2 has been investigated for potential electronic applications, due to its high charge-carrier mobility and strong layer-dependent bandgap, it has proven to be one of the more difficult TMDs to synthesise. In contrast to most TMDs, Pt has a significantly more stable…
▽ More
Group-10 transition metal dichalcogenides (TMDs) are rising in prominence within the highly innovative field of 2D materials. While PtS2 has been investigated for potential electronic applications, due to its high charge-carrier mobility and strong layer-dependent bandgap, it has proven to be one of the more difficult TMDs to synthesise. In contrast to most TMDs, Pt has a significantly more stable monosulfide, the non-layered PtS. The existence of two stable platinum sulfides, sometimes within the same sample, has resulted in much confusion between the materials in the literature. Neither of these Pt sulfides have been thoroughly characterised as-of-yet. Here we utilise time-efficient, scalable methods to synthesise high-quality thin films of both Pt sulfides on a variety of substrates. The competing nature of the sulfides and limited thermal stability of these materials is demonstrated. We report peak-fitted X-ray photoelectron spectra, and Raman spectra using a variety of laser wavelengths, for both materials. This systematic characterisation provides a guide to differentiate between the sulfides using relatively simple methods which is essential to enable future work on these interesting materials.
△ Less
Submitted 31 March, 2021;
originally announced April 2021.
-
Synthesis of WTe2 thin films and highly-crystalline nanobelts from pre-deposited reactants
Authors:
John B. Mc Manus,
Cansu Ilhan,
Bastien Balsamo,
Clive Downing,
Conor P. Cullen,
Tanja Stimpfel-Lidner,
Graeme Cunningham,
Lisanne Peters,
Lewys Jones,
Daragh Mullarkey,
Igor V. Shvets,
Georg S. Duesberg,
Niall McEvoy
Abstract:
Tungsten ditelluride is a layered transition metal dichalcogenide (TMD) that has attracted increasing research interest in recent years. WTe2 has demonstrated large non-saturating magnetoresistance, potential for spintronic applications and promise as a type-II Weyl semimetal. The majority of works on WTe2 have relied on mechanically-exfoliated flakes from chemical vapour transport (CVT) grown cry…
▽ More
Tungsten ditelluride is a layered transition metal dichalcogenide (TMD) that has attracted increasing research interest in recent years. WTe2 has demonstrated large non-saturating magnetoresistance, potential for spintronic applications and promise as a type-II Weyl semimetal. The majority of works on WTe2 have relied on mechanically-exfoliated flakes from chemical vapour transport (CVT) grown crystals for their investigations. While producing high-quality samples, this method is hindered by several disadvantages including long synthesis times, high-temperature anneals and an inherent lack of scalability. In this work, a synthesis method is demonstrated that allows the production of large-area polycrystalline films of WTe2. This is achieved by the reaction of pre-deposited films of W and Te at a relatively low temperature of 550 degC. Sputter X-ray photoelectron spectroscopy reveals the rapid but self-limiting nature of the oxidation of these WTe2 films in ambient conditions. The WTe2 films are composed of areas of micrometre sized nanobelts that can be isolated and offer potential as an alternative to CVT-grown samples. These nanobelts are highly crystalline with low defect densities indicated by TEM and show promising initial electrical results.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Low-temperature synthesis and electrocatalytic application of large-area PtTe2 thin films
Authors:
John B. Mc Manus,
Dominik V. Horvath,
Michelle P. Browne,
Conor P. Cullen,
Graeme Cunningham,
Toby Hallam,
Kuanysh Zhussupbekov,
Daragh Mullarkey,
Cormac Ó Coileáin,
Igor V. Shvets,
Martin Pumera,
Georg S. Duesberg,
Niall McEvoy
Abstract:
The synthesis of transition metal dichalcogenides (TMDs) has been a primary focus for 2D nanomaterial research over the last 10 years, however, only a small fraction of this research has been concentrated on transition metal ditellurides. In particular, nanoscale platinum ditelluride (PtTe2) has rarely been investigated, despite its potential applications in catalysis, photonics and spintronics. O…
▽ More
The synthesis of transition metal dichalcogenides (TMDs) has been a primary focus for 2D nanomaterial research over the last 10 years, however, only a small fraction of this research has been concentrated on transition metal ditellurides. In particular, nanoscale platinum ditelluride (PtTe2) has rarely been investigated, despite its potential applications in catalysis, photonics and spintronics. Of the reports published, the majority examine mechanically-exfoliated flakes from chemical vapor transport (CVT) grown crystals. While this production method is ideal for fundamental studies, it is very resource intensive therefore rendering this process unsuitable for large scale applications. In this report, the synthesis of thin films of PtTe2 through the reaction of solid-phase precursor films is described. This offers a production method for large-area, thickness-controlled PtTe2, suitable for a range of applications. These polycrystalline PtTe2 films were grown at temperatures as low as 450 degC, significantly below the typical temperatures used in the CVT synthesis methods. To investigate their potential applicability, these films were examined as electrocatalysts for the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). The films showed promising catalytic behavior, however, the PtTe2 was found to undergo chemical transformation to a substoichiometric chalcogenide compound under ORR conditions. This study shows while PtTe2 is stable and highly useful for HER, this property does not apply to ORR, which undergoes a fundamentally different mechanism. This study broadens our knowledge of the electrocatalysis of TMDs.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Investigation of Growth-Induced Strain in Monolayer MoS2 Grown by Chemical Vapor Deposition
Authors:
Siwei Luo,
Conor P. Cullen,
Gencai Guo,
Jianxin Zhong,
Georg S. Duesberg
Abstract:
Two-dimensional materials such as transitional metal dichalcogenides exhibit unique optical and electrical properties. Here we report on the varying optical properties of CVD grown MoS2 monolayer flakes with different shapes. In particular, it is observed that the perimeter and the central region of the flakes have non-uniform photoluminescence (PL) energy and intensity. We quantified these effect…
▽ More
Two-dimensional materials such as transitional metal dichalcogenides exhibit unique optical and electrical properties. Here we report on the varying optical properties of CVD grown MoS2 monolayer flakes with different shapes. In particular, it is observed that the perimeter and the central region of the flakes have non-uniform photoluminescence (PL) energy and intensity. We quantified these effects systematically and propose that thermally induced strain during growth is the origin. The strain relaxation after transfer of the MoS2 flakes supports this explanation. Detailed investigations of the spatial distribution of the PL energy reveal that depending on the shape of the MoS2 flakes, the width of the strain field is different. Thus, our results help to elucidate the fundamental mechanisms responsible for the differences in PL and Raman signals between the perimeter region and the center region of monolayer MoS2 and suggest that the induced strain plays an important role in the growth of monolayer materials.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
PtSe2 grown directly on polymer foil for use as a robust piezoresistive sensor
Authors:
Conor S. Boland,
Cormac Ó Coileáin,
Stefan Wagner,
John B. McManus,
Conor P. Cullen,
Max C. Lemme,
Georg S. Duesberg,
Niall McEvoy
Abstract:
Robust strain gauges are fabricated by growing PtSe2 layers directly on top of flexible polyimide foils. These PtSe2 layers are grown by low-temperature, thermally-assisted conversion of predeposited Pt layers. Under applied flexure the PtSe2 layers show a decrease in electrical resistance signifying a negative gauge factor. The influence of the growth temperature and film thickness on the electro…
▽ More
Robust strain gauges are fabricated by growing PtSe2 layers directly on top of flexible polyimide foils. These PtSe2 layers are grown by low-temperature, thermally-assisted conversion of predeposited Pt layers. Under applied flexure the PtSe2 layers show a decrease in electrical resistance signifying a negative gauge factor. The influence of the growth temperature and film thickness on the electromechanical properties of the PtSe2 layers is investigated. The best-performing strain gauges fabricated have a superior gauge factor to that of commercial metal-based strain gauges. Notably, the strain gauges offer good cyclability and are very robust, surviving repeated peel tests and immersion in water. Furthermore, preliminary results indicate that the stain gauges also show potential for high-frequency operation. This host of advantageous properties, combined with the possibility of further optimization and channel patterning, indicate that PtSe2 grown directly on polyimide holds great promise for future applications.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Photoresponsivity enhancement in monolayer MoS$_2$ by rapid O$_2$:Ar plasma treatment
Authors:
Jakub Jadwiszczak,
Gen Li,
Conor P. Cullen,
Jing Jing Wang,
Pierce Maguire,
Georg S. Duesberg,
James G. Lunney,
Hongzhou Zhang
Abstract:
We report up to ten-fold enhancement of the photoresponsivity of monolayer MoS$_2$ by treatment with O$_2$:Ar (1:3) plasma. We characterize the surface of plasma-exposed MoS$_2$ by TEM, Raman and PL mapping and discuss the role of MoO$_x$ in improving the photocurrent generation in our devices. At the highest tested laser power of 0.1 mW, we find ten-fold enhancements to both the output current an…
▽ More
We report up to ten-fold enhancement of the photoresponsivity of monolayer MoS$_2$ by treatment with O$_2$:Ar (1:3) plasma. We characterize the surface of plasma-exposed MoS$_2$ by TEM, Raman and PL mapping and discuss the role of MoO$_x$ in improving the photocurrent generation in our devices. At the highest tested laser power of 0.1 mW, we find ten-fold enhancements to both the output current and carrier field-effect mobility under the illumination wavelength of 488 nm. We suggest that the improvement of electrical performance is due to the surface presence of MoO$_x$ resulting from the chemical conversion of MoS$_2$ by the oxygen-containing plasma. Our results highlight the beneficial role of plasma treatment as a fast and convenient way of improving the properties of synthetic 2D MoS$_2$ devices for future consideration in optoelectronics research.
△ Less
Submitted 22 December, 2018;
originally announced December 2018.
-
Neuromorphic MoS2 memtransistors fabricated by localised helium ion beam irradiation
Authors:
Jakub Jadwiszczak,
Darragh Keane,
Pierce Maguire,
Conor P. Cullen,
Yangbo Zhou,
Hua-Ding Song,
Clive Downing,
Daniel S. Fox,
Niall McEvoy,
Rui Zhu,
Jun Xu,
Georg S. Duesberg,
Zhi-Min Liao,
John J. Boland,
Hongzhou Zhang
Abstract:
Two-dimensional layered semiconductors have recently emerged as attractive building blocks for next-generation low-power non-volatile memories. However, challenges remain in the controllable sub-micron fabrication of bipolar resistively switching circuit components from these novel materials. Here we report on the scalable experimental realisation of lateral on-dielectric memtransistors from monol…
▽ More
Two-dimensional layered semiconductors have recently emerged as attractive building blocks for next-generation low-power non-volatile memories. However, challenges remain in the controllable sub-micron fabrication of bipolar resistively switching circuit components from these novel materials. Here we report on the scalable experimental realisation of lateral on-dielectric memtransistors from monolayer single-crystal molybdenum disulfide (MoS2) utilising a focused helium ion beam. Site-specific irradiation with the probe of a helium ion microscope (HIM) allows for the creation of charged defects in the MoS2 lattice. The reversible drift of these locally seeded defects in the applied electric field modulates the resistance of the semiconducting channel, enabling versatile memristive functionality on the nanoscale. We find the device can reliably retain its resistance ratios and set biases for hundreds of switching cycles at sweep frequencies of up to 2.9 V/s with relatively low drain-source biases. We also demonstrate long-term potentiation and depression with sharp habituation that promises application in future neuromorphic architectures. This work advances the down-scaling progress of memristive devices without sacrificing key performance parameters such as power consumption or its applicability for synaptic emulation.
△ Less
Submitted 23 November, 2018;
originally announced November 2018.
-
Cullen's Stability Principle and Weak Solutions of the Free-surface Semi-geostrophic Equations
Authors:
Mike J. P. Cullen,
Tobias Kuna,
Beatrice Pelloni,
Mark Wilkinson
Abstract:
The semi-geostrophic equations are used widely in the modelling of large-scale atmospheric flows. In this note, we prove the global existence of weak solutions of the incompressible semi-geostrophic equations, in geostrophic coordinates, in a three-dimensional domain with a free upper boundary. The proof, based on an energy minimisation argument originally inspired by Cullen's Stability Principle,…
▽ More
The semi-geostrophic equations are used widely in the modelling of large-scale atmospheric flows. In this note, we prove the global existence of weak solutions of the incompressible semi-geostrophic equations, in geostrophic coordinates, in a three-dimensional domain with a free upper boundary. The proof, based on an energy minimisation argument originally inspired by Cullen's Stability Principle, uses optimal transport results as well as the analysis of Hamiltonian ODEs in spaces of probability measures as studied by Ambrosio and Gangbo. We also give a general formulation of Cullen's Stability Principle in a rigorous mathematical framework.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Particle relabelling symmetries and Noether's theorem for vertical slice models
Authors:
Colin J. Cotter,
Michael J. P. Cullen
Abstract:
We consider the variational formulation for vertical slice models introduced in Cotter and Holm (Proc Roy Soc, 2013). These models have a Kelvin circulation theorem that holds on all materially-transported closed loops, not just those loops on isosurfaces of potential temperature. Potential vorticity conservation can be derived directly from this circulation theorem. In this paper, we show that th…
▽ More
We consider the variational formulation for vertical slice models introduced in Cotter and Holm (Proc Roy Soc, 2013). These models have a Kelvin circulation theorem that holds on all materially-transported closed loops, not just those loops on isosurfaces of potential temperature. Potential vorticity conservation can be derived directly from this circulation theorem. In this paper, we show that this property is due to these models having a relabelling symmetry for every single diffeomorphism of the vertical slice that preserves the density, not just those diffeomorphisms that preserve the potential temperature. This is developed using the methodology of Cotter and Holm (Foundations of Computational Mathematics, 2012).
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Algorithms and Data Structures to Accelerate Network Analysis
Authors:
Jordi Ros-Giralt,
Alan Commike,
Peter Cullen,
Richard Lethin
Abstract:
As the sheer amount of computer generated data continues to grow exponentially, new bottlenecks are unveiled that require rethinking our traditional software and hardware architectures. In this paper we present five algorithms and data structures (long queue emulation, lockless bimodal queues, tail early dropping, LFN tables, and multiresolution priority queues) designed to optimize the process of…
▽ More
As the sheer amount of computer generated data continues to grow exponentially, new bottlenecks are unveiled that require rethinking our traditional software and hardware architectures. In this paper we present five algorithms and data structures (long queue emulation, lockless bimodal queues, tail early dropping, LFN tables, and multiresolution priority queues) designed to optimize the process of analyzing network traffic. We integrated these optimizations on R-Scope, a high performance network appliance that runs the Bro network analyzer, and present benchmarks showcasing performance speed ups of 5X at traffic rates of 10 Gbps.
△ Less
Submitted 17 November, 2017;
originally announced November 2017.
-
Defect Sizing, Separation and Substrate Effects in Ion-Irradiated Monolayer 2D Materials
Authors:
Pierce Maguire,
Daniel S. Fox,
Yangbo Zhou,
Qianjin Wang,
Maria O'Brien,
Jakub Jadwiszczak,
Conor P. Cullen,
John McManus,
Niall McEvoy,
Georg S. Duesberg,
Hongzhou Zhang
Abstract:
Precise and scalable defect engineering of 2D nanomaterials is acutely sought-after in contemporary materials science. Here we present defect engineering in monolayer graphene and molybdenum disulfide (MoS$_2$) by irradiation with noble gas ions at 30 keV. Two ion species of different masses were used in a gas field ion source microscope: helium (He$^+$) and neon (Ne$^+$). A detailed study of the…
▽ More
Precise and scalable defect engineering of 2D nanomaterials is acutely sought-after in contemporary materials science. Here we present defect engineering in monolayer graphene and molybdenum disulfide (MoS$_2$) by irradiation with noble gas ions at 30 keV. Two ion species of different masses were used in a gas field ion source microscope: helium (He$^+$) and neon (Ne$^+$). A detailed study of the introduced defect sizes and resulting inter-defect distance with escalating ion dose was performed using Raman spectroscopy. Expanding on existing models, we found that the average defect size is considerably smaller for supported than freestanding graphene and that the rate of defect production is larger. We conclude that secondary atoms from the substrate play a significant role in defect production, creating smaller defects relative to those created by the primary ion beam. Furthermore, a similar model was also applied to supported MoS$_2$, another promising member of the 2D material family. Defect yields for both ions were obtained for MoS$_2$, demonstrating their different interaction with the material and facilitating comparison with other irradiation conditions in the literature.
△ Less
Submitted 17 April, 2018; v1 submitted 27 July, 2017;
originally announced July 2017.
-
Multiresolution Priority Queues
Authors:
Jordi Ros-Giralt,
Alan Commike,
Peter Cullen,
Jeff Lucovsky,
Dilip Madathil,
Richard Lethin
Abstract:
Priority queues are container data structures essential to many high performance computing (HPC) applications. In this paper, we introduce multiresolution priority queues, a data structure that improves the performance of the standard heap based implementations by trading off a controllable amount of resolution in the space of priorities. The new data structure can reduce the worst case performanc…
▽ More
Priority queues are container data structures essential to many high performance computing (HPC) applications. In this paper, we introduce multiresolution priority queues, a data structure that improves the performance of the standard heap based implementations by trading off a controllable amount of resolution in the space of priorities. The new data structure can reduce the worst case performance of inserting an element from O(log(n)) to O(log(r)), where n is the number of elements in the queue and r is the number of resolution groups in the priority space. The worst case cost of removing the top element is O(1). When the number of elements in the table is high, the amortized cost to insert an element becomes O(1).
△ Less
Submitted 10 August, 2017; v1 submitted 26 May, 2017;
originally announced May 2017.
-
Vertical slice modelling of nonlinear Eady waves using a compatible finite element method
Authors:
Hiroe Yamazaki,
Jemma Shipton,
Michael J. P. Cullen,
Lawrence Mitchell,
Colin J. Cotter
Abstract:
A vertical slice model is developed for the Euler-Boussinesq equations with a constant temperature gradient in the direction normal to the slice (the Eady-Boussinesq model). The model is a solution of the full three-dimensional equations with no variation normal to the slice, which is an idealized problem used to study the formation and subsequent evolution of weather fronts. A compatible finite e…
▽ More
A vertical slice model is developed for the Euler-Boussinesq equations with a constant temperature gradient in the direction normal to the slice (the Eady-Boussinesq model). The model is a solution of the full three-dimensional equations with no variation normal to the slice, which is an idealized problem used to study the formation and subsequent evolution of weather fronts. A compatible finite element method is used to discretise the governing equations. To extend the Charney-Phillips grid staggering in the compatible finite element framework, we use the same node locations for buoyancy as the vertical part of velocity and apply a transport scheme for a partially continuous finite element space. For the time discretisation, we solve the semi-implicit equations together with an explicit strong-stability-preserving Runge-Kutta scheme to all of the advection terms. The model reproduces several quasi-periodic lifecycles of fronts despite the presence of strong discontinuities. An asymptotic limit analysis based on the semi-geostrophic theory shows that the model solutions are converging to a solution in cross-front geostrophic balance. The results are consistent with the previous results using finite difference methods, indicating that the compatible finite element method is performing as well as finite difference methods for this test problem. We observe dissipation of kinetic energy of the cross-front velocity in the model due to the lack of resolution at the fronts, even though the energy loss is not likely to account for the large gap on the strength of the fronts between the model result and the semi-geostrophic limit solution.
△ Less
Submitted 4 April, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
High-performance hybrid electronic devices from layered PtSe2 films grown at low temperature
Authors:
Chanyoung Yim,
Kangho Lee,
Niall McEvoy,
Maria O Brien,
Sarah Riazimehr,
Nina C. Berner,
Conor P. Cullen,
Jani Kotakoski,
Jannik C. Meyer,
Max C. Lemme,
Georg S. Duesberg
Abstract:
Layered two-dimensional (2D) materials display great potential for a range of applications, particularly in electronics. We report the large-scale synthesis of thin films of platinum diselenide (PtSe2), a thus far scarcely investigated transition metal dichalcogenide. Importantly, the synthesis by thermal assisted conversion is performed at 400 °C, representing a breakthrough for the direct integr…
▽ More
Layered two-dimensional (2D) materials display great potential for a range of applications, particularly in electronics. We report the large-scale synthesis of thin films of platinum diselenide (PtSe2), a thus far scarcely investigated transition metal dichalcogenide. Importantly, the synthesis by thermal assisted conversion is performed at 400 °C, representing a breakthrough for the direct integration of this novel material with silicon (Si) technology. Besides the thorough characterization of this new 2D material, we demonstrate its promise for applications in high-performance gas sensing with extremely short response and recovery times observed due to the 2D nature of the films. Furthermore, we realized vertically-stacked heterostructures of PtSe2 on Si which act as both photodiodes and photovoltaic cells. Thus this study establishes PtSe2 as a potential candidate for next-generation sensors and (opto-)electronic devices, using fabrication protocols compatible with established Si technologies.
△ Less
Submitted 28 September, 2016; v1 submitted 28 June, 2016;
originally announced June 2016.
-
Free upper boundary value problems for the semi-geostrophic equations
Authors:
M. J. P. Cullen,
D. K. Gilbert,
T. Kuna,
B. Pelloni
Abstract:
The semi-geostrophic system is widely used in the modelling of large-scale atmospheric flows. In this paper, we prove existence of solutions of the incompressible semi-geostrophic equations in a fully three-dimensional domain with a free upper boundary condition.
We show that, using methods similar to those introduced in the pioneering work of Benamou and Brenier, who analysed the same system bu…
▽ More
The semi-geostrophic system is widely used in the modelling of large-scale atmospheric flows. In this paper, we prove existence of solutions of the incompressible semi-geostrophic equations in a fully three-dimensional domain with a free upper boundary condition.
We show that, using methods similar to those introduced in the pioneering work of Benamou and Brenier, who analysed the same system but with a rigid boundary condition, we can prove the existence of solutions for the incompressible free boundary problem. The proof is based on optimal transport results as well as the analysis of Hamiltonian ODEs in spaces of probability measures given by Ambrosio and Gangbo. We also show how these techniques can be modified to yield the same result also for the compressible version of the system.
△ Less
Submitted 24 June, 2016; v1 submitted 30 September, 2014;
originally announced September 2014.
-
Solutions of the Fully Compressible Semi-Geostrophic System
Authors:
M. J. P. Cullen,
D. K. Gilbert,
B. Pelloni
Abstract:
The fully compressible semi-geostrophic system is widely used in the modelling of large-scale atmospheric flows. In this paper, we prove rigorously the existence of weak Lagrangian solutions of this system, formulated in the original physical coordinates. In addition, we provide an alternative proof of the earlier result on the existence of weak solutions of this system expressed in the so-called…
▽ More
The fully compressible semi-geostrophic system is widely used in the modelling of large-scale atmospheric flows. In this paper, we prove rigorously the existence of weak Lagrangian solutions of this system, formulated in the original physical coordinates. In addition, we provide an alternative proof of the earlier result on the existence of weak solutions of this system expressed in the so-called geostrophic, or dual, coordinates. The proofs are based on the optimal transport formulation of the problem and on recent general results concerning transport problems posed in the Wasserstein space of probability measures.
△ Less
Submitted 15 November, 2013; v1 submitted 15 December, 2011;
originally announced December 2011.
-
Singularity of the density of states in the two-dimensional Hubbard model from finite size scaling of Yang-Lee zeros
Authors:
E. Abraham,
I. M. Barbour,
P. H. Cullen,
E. G. Klepfish,
E. R. Pike,
Sarben Sarkar
Abstract:
A finite size scaling is applied to the Yang-Lee zeros of the grand canonical partition function for the 2-D Hubbard model in the complex chemical potential plane. The logarithmic scaling of the imaginary part of the zeros with the system size indicates a singular dependence of the carrier density on the chemical potential. Our analysis points to a second-order phase transition with critical exp…
▽ More
A finite size scaling is applied to the Yang-Lee zeros of the grand canonical partition function for the 2-D Hubbard model in the complex chemical potential plane. The logarithmic scaling of the imaginary part of the zeros with the system size indicates a singular dependence of the carrier density on the chemical potential. Our analysis points to a second-order phase transition with critical exponent ${1\over δ}={1\over 2}\pm {1\over 3}$ which leads to a divergence of the electronic susceptibility. We interprete these results as reflecting singular behaviour of the density of states in the quasiparticle spectrum.
△ Less
Submitted 27 March, 1995;
originally announced March 1995.
