Showing 1–29 of 29 results for author: Christie, M

Universal Effective Charges in the $sd$ and $fp$ Shells

Authors: T. H. Ogunbeku, J. M. Allmond, T. J. Gray, W. -J. Ong, B. A. Brown, A. Gargano, R. Grzywacz, J. D. Holt, A. O. Macchiavelli, T. Miyagi, S. Neupane, B. C. Rasco, H. Schatz, B. M. Sherrill, O. B. Tarasov, H. Arora, A. D. Ayangeakaa, H. C. Berg, J. M. Berkman, D. L. Bleuel, K. Bosmpotinis, M. P. Carpenter, G. Cerizza, A. Chester, J. M. Christie , et al. (57 additional authors not shown)

Abstract: The 247-keV state in $^{54}$Sc, populated in the $β$ decay of $^{54}$Ca, is reported here as a nanosecond isomer with a half-life of 26.0(22) ns. The state is interpreted as the $1^+$ member of the $πf_{7/2}\otimesνf_{5/2}$ spin-coupled multiplet, which decays to the $3^+,πf_{7/2} \otimes νp_{1/2}$ ground state. The new half-life corresponds to a pure $E2$ transition with a strength of 1.93(16) W.… ▽ More The 247-keV state in $^{54}$Sc, populated in the $β$ decay of $^{54}$Ca, is reported here as a nanosecond isomer with a half-life of 26.0(22) ns. The state is interpreted as the $1^+$ member of the $πf_{7/2}\otimesνf_{5/2}$ spin-coupled multiplet, which decays to the $3^+,πf_{7/2} \otimes νp_{1/2}$ ground state. The new half-life corresponds to a pure $E2$ transition with a strength of 1.93(16) W.u., providing the most precise, unambiguous $B(E2)$ value in the neutron-rich $fp$ region to date for a nucleus with valence protons above $Z=20$. Notably, it is roughly four times larger than the $B(E2; 1/2^{-} \rightarrow 5/2^{-})$ value in $^{55}$Ca. The results, as compared to semi-empirical and ab initio shell-model calculations, indicate (1) a weak $N=34$ sub-shell gap relative to $N = 32$, (2) a large $E2$ enhancement in Sc as compared to Ca due to $1p-1h$ proton excitations across $Z=28$, and (3) empirical effective proton and neutron charges, $e_π$ = 1.30(8)$e$ and $e_ν$ = 0.452(7)$e$, respectively, that are in contrast to reports of $e_π\approx 1.1-1.15e$ and $e_ν\approx 0.6-0.8e$ for $fp$-shell nuclei near $N = Z$. We demonstrate that these reports are erroneous and that, in fact, a universal set of effective charges can be used across the $sd$ and $fp$ shells. △ Less

Submitted 26 June, 2025; originally announced June 2025.

Comments: 11 pages (including 1-page appendix), 5 figures, accepted by Physical Review Letters

Object Detection with Deep Learning for Rare Event Search in the GADGET II TPC

Authors: Tyler Wheeler, S. Ravishankar, C. Wrede, A. Andalib, A. Anthony, Y. Ayyad, B. Jain, A. Jaros, R. Mahajan, L. Schaedig, A. Adams, S. Ahn, J. M. Allmond, D. Bardayan, D. Bazin, K. Bosmpotinis, T. Budner, S. R. Carmichael, S. M. Cha, A. Chen, K. A. Chipps, J. M. Christie, I. Cox, J. Dopfer, M. Friedman , et al. (28 additional authors not shown)

Abstract: In the pursuit of identifying rare two-particle events within the GADGET II Time Projection Chamber (TPC), this paper presents a comprehensive approach for leveraging Convolutional Neural Networks (CNNs) and various data processing methods. To address the inherent complexities of 3D TPC track reconstructions, the data is expressed in 2D projections and 1D quantities. This approach capitalizes on t… ▽ More In the pursuit of identifying rare two-particle events within the GADGET II Time Projection Chamber (TPC), this paper presents a comprehensive approach for leveraging Convolutional Neural Networks (CNNs) and various data processing methods. To address the inherent complexities of 3D TPC track reconstructions, the data is expressed in 2D projections and 1D quantities. This approach capitalizes on the diverse data modalities of the TPC, allowing for the efficient representation of the distinct features of the 3D events, with no loss in topology uniqueness. Additionally, it leverages the computational efficiency of 2D CNNs and benefits from the extensive availability of pre-trained models. Given the scarcity of real training data for the rare events of interest, simulated events are used to train the models to detect real events. To account for potential distribution shifts when predominantly depending on simulations, significant perturbations are embedded within the simulations. This produces a broad parameter space that works to account for potential physics parameter and detector response variations and uncertainties. These parameter-varied simulations are used to train sensitive 2D CNN object detectors. When combined with 1D histogram peak detection algorithms, this multi-modal detection framework is highly adept at identifying rare, two-particle events in data taken during experiment 21072 at the Facility for Rare Isotope Beams (FRIB), demonstrating a 100% recall for events of interest. We present the methods and outcomes of our investigation and discuss the potential future applications of these techniques. △ Less

Submitted 28 January, 2025; originally announced January 2025.

AKiRa: Augmentation Kit on Rays for optical video generation

Authors: Xi Wang, Robin Courant, Marc Christie, Vicky Kalogeiton

Abstract: Recent advances in text-conditioned video diffusion have greatly improved video quality. However, these methods offer limited or sometimes no control to users on camera aspects, including dynamic camera motion, zoom, distorted lens and focus shifts. These motion and optical aspects are crucial for adding controllability and cinematic elements to generation frameworks, ultimately resulting in visua… ▽ More Recent advances in text-conditioned video diffusion have greatly improved video quality. However, these methods offer limited or sometimes no control to users on camera aspects, including dynamic camera motion, zoom, distorted lens and focus shifts. These motion and optical aspects are crucial for adding controllability and cinematic elements to generation frameworks, ultimately resulting in visual content that draws focus, enhances mood, and guides emotions according to filmmakers' controls. In this paper, we aim to close the gap between controllable video generation and camera optics. To achieve this, we propose AKiRa (Augmentation Kit on Rays), a novel augmentation framework that builds and trains a camera adapter with a complex camera model over an existing video generation backbone. It enables fine-tuned control over camera motion as well as complex optical parameters (focal length, distortion, aperture) to achieve cinematic effects such as zoom, fisheye effect, and bokeh. Extensive experiments demonstrate AKiRa's effectiveness in combining and composing camera optics while outperforming all state-of-the-art methods. This work sets a new landmark in controlled and optically enhanced video generation, paving the way for future optical video generation methods. △ Less

Submitted 29 December, 2024; v1 submitted 18 December, 2024; originally announced December 2024.

SPARK: Self-supervised Personalized Real-time Monocular Face Capture

Authors: Kelian Baert, Shrisha Bharadwaj, Fabien Castan, Benoit Maujean, Marc Christie, Victoria Abrevaya, Adnane Boukhayma

Abstract: Feedforward monocular face capture methods seek to reconstruct posed faces from a single image of a person. Current state of the art approaches have the ability to regress parametric 3D face models in real-time across a wide range of identities, lighting conditions and poses by leveraging large image datasets of human faces. These methods however suffer from clear limitations in that the underlyin… ▽ More Feedforward monocular face capture methods seek to reconstruct posed faces from a single image of a person. Current state of the art approaches have the ability to regress parametric 3D face models in real-time across a wide range of identities, lighting conditions and poses by leveraging large image datasets of human faces. These methods however suffer from clear limitations in that the underlying parametric face model only provides a coarse estimation of the face shape, thereby limiting their practical applicability in tasks that require precise 3D reconstruction (aging, face swapping, digital make-up, ...). In this paper, we propose a method for high-precision 3D face capture taking advantage of a collection of unconstrained videos of a subject as prior information. Our proposal builds on a two stage approach. We start with the reconstruction of a detailed 3D face avatar of the person, capturing both precise geometry and appearance from a collection of videos. We then use the encoder from a pre-trained monocular face reconstruction method, substituting its decoder with our personalized model, and proceed with transfer learning on the video collection. Using our pre-estimated image formation model, we obtain a more precise self-supervision objective, enabling improved expression and pose alignment. This results in a trained encoder capable of efficiently regressing pose and expression parameters in real-time from previously unseen images, which combined with our personalized geometry model yields more accurate and high fidelity mesh inference. Through extensive qualitative and quantitative evaluation, we showcase the superiority of our final model as compared to state-of-the-art baselines, and demonstrate its generalization ability to unseen pose, expression and lighting. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Comments: SIGGRAPH Asia 2024 Conference Paper. Project page: https://kelianb.github.io/SPARK/

Journal ref: SIGGRAPH Asia 2024 Conference Papers (SA Conference Papers '24), December 3-6, 2024, Tokyo, Japan

Suppressed Electric Quadrupole Collectivity in $^{49}$Ti

Authors: T. J. Gray, J. M. Allmond, C. Benetti, C. Wibisono, L. Baby, A. Gargano, T. Miyagi, A. O. Macchiavelli, A. E. Stuchbery, J. L. Wood, S. Ajayi, J. Aragon, B. W. Asher, P. Barber, S. Bhattacharya, R. Boisseau, J. M. Christie, A. L. Conley, P. De Rosa, D. T. Dowling, C. Esparza, J. Gibbons, K. Hanselman, J. D. Holt, S. Lopez-Caceres , et al. (12 additional authors not shown)

Abstract: Single-step Coulomb excitation of $^{46,48,49,50}$Ti is presented. A complete set of $E2$ matrix elements for the quintuplet of states in $^{49}$Ti, centered on the $2^+$ core excitation, was measured for the first time. A total of nine $E2$ matrix elements are reported, four of which were previously unknown. $^{49}_{22}$Ti$_{27}$ shows a $20\%$ quenching in electric quadrupole transition strength… ▽ More Single-step Coulomb excitation of $^{46,48,49,50}$Ti is presented. A complete set of $E2$ matrix elements for the quintuplet of states in $^{49}$Ti, centered on the $2^+$ core excitation, was measured for the first time. A total of nine $E2$ matrix elements are reported, four of which were previously unknown. $^{49}_{22}$Ti$_{27}$ shows a $20\%$ quenching in electric quadrupole transition strength as compared to its semi-magic $^{50}_{22}$Ti$_{28}$ neighbour. This $20\%$ quenching, while empirically unprecedented, can be explained with a remarkably simple two-state mixing model, which is also consistent with other ground-state properties such as the magnetic dipole moment and electric quadrupole moment. A connection to nucleon transfer data and the quenching of single-particle strength is also demonstrated. The simplicity of the $^{49}$Ti-$^{50}$Ti pair (i.e., approximate single-$j$ $0f_{7/2}$ valence space and isolation of yrast states from non-yrast states) provides a unique opportunity to disentangle otherwise competing effects in the ground-state properties of atomic nuclei, the emergence of collectivity, and the role of proton-neutron interactions. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 8 pages, 5 figures, accepted in Physics Letters B

E.T. the Exceptional Trajectories: Text-to-camera-trajectory generation with character awareness

Authors: Robin Courant, Nicolas Dufour, Xi Wang, Marc Christie, Vicky Kalogeiton

Abstract: Stories and emotions in movies emerge through the effect of well-thought-out directing decisions, in particular camera placement and movement over time. Crafting compelling camera trajectories remains a complex iterative process, even for skilful artists. To tackle this, in this paper, we propose a dataset called the Exceptional Trajectories (E.T.) with camera trajectories along with character inf… ▽ More Stories and emotions in movies emerge through the effect of well-thought-out directing decisions, in particular camera placement and movement over time. Crafting compelling camera trajectories remains a complex iterative process, even for skilful artists. To tackle this, in this paper, we propose a dataset called the Exceptional Trajectories (E.T.) with camera trajectories along with character information and textual captions encompassing descriptions of both camera and character. To our knowledge, this is the first dataset of its kind. To show the potential applications of the E.T. dataset, we propose a diffusion-based approach, named DIRECTOR, which generates complex camera trajectories from textual captions that describe the relation and synchronisation between the camera and characters. To ensure robust and accurate evaluations, we train on the E.T. dataset CLaTr, a Contrastive Language-Trajectory embedding for evaluation metrics. We posit that our proposed dataset and method significantly advance the democratization of cinematography, making it more accessible to common users. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: ECCV 2024. Project page: https://www.lix.polytechnique.fr/vista/projects/2024_et_courant/

Cinematographic Camera Diffusion Model

Authors: Hongda Jiang, Xi Wang, Marc Christie, Libin Liu, Baoquan Chen

Abstract: Designing effective camera trajectories in virtual 3D environments is a challenging task even for experienced animators. Despite an elaborate film grammar, forged through years of experience, that enables the specification of camera motions through cinematographic properties (framing, shots sizes, angles, motions), there are endless possibilities in deciding how to place and move cameras with char… ▽ More Designing effective camera trajectories in virtual 3D environments is a challenging task even for experienced animators. Despite an elaborate film grammar, forged through years of experience, that enables the specification of camera motions through cinematographic properties (framing, shots sizes, angles, motions), there are endless possibilities in deciding how to place and move cameras with characters. Dealing with these possibilities is part of the complexity of the problem. While numerous techniques have been proposed in the literature (optimization-based solving, encoding of empirical rules, learning from real examples,...), the results either lack variety or ease of control. In this paper, we propose a cinematographic camera diffusion model using a transformer-based architecture to handle temporality and exploit the stochasticity of diffusion models to generate diverse and qualitative trajectories conditioned by high-level textual descriptions. We extend the work by integrating keyframing constraints and the ability to blend naturally between motions using latent interpolation, in a way to augment the degree of control of the designers. We demonstrate the strengths of this text-to-camera motion approach through qualitative and quantitative experiments and gather feedback from professional artists. The code and data are available at \URL{https://github.com/jianghd1996/Camera-control}. △ Less

Submitted 25 February, 2024; originally announced February 2024.

BluNF: Blueprint Neural Field

Authors: Robin Courant, Xi Wang, Marc Christie, Vicky Kalogeiton

Abstract: Neural Radiance Fields (NeRFs) have revolutionized scene novel view synthesis, offering visually realistic, precise, and robust implicit reconstructions. While recent approaches enable NeRF editing, such as object removal, 3D shape modification, or material property manipulation, the manual annotation prior to such edits makes the process tedious. Additionally, traditional 2D interaction tools lac… ▽ More Neural Radiance Fields (NeRFs) have revolutionized scene novel view synthesis, offering visually realistic, precise, and robust implicit reconstructions. While recent approaches enable NeRF editing, such as object removal, 3D shape modification, or material property manipulation, the manual annotation prior to such edits makes the process tedious. Additionally, traditional 2D interaction tools lack an accurate sense of 3D space, preventing precise manipulation and editing of scenes. In this paper, we introduce a novel approach, called Blueprint Neural Field (BluNF), to address these editing issues. BluNF provides a robust and user-friendly 2D blueprint, enabling intuitive scene editing. By leveraging implicit neural representation, BluNF constructs a blueprint of a scene using prior semantic and depth information. The generated blueprint allows effortless editing and manipulation of NeRF representations. We demonstrate BluNF's editability through an intuitive click-and-change mechanism, enabling 3D manipulations, such as masking, appearance modification, and object removal. Our approach significantly contributes to visual content creation, paving the way for further research in this area. △ Less

Submitted 7 September, 2023; originally announced September 2023.

Comments: ICCV-W (AI3DCC) 2023. Project page with videos and code: https://www.lix.polytechnique.fr/vista/projects/2023_iccvw_courant/

Quantitative comparisons of VHE gamma-ray blazar flares with relativistic reconnection models

Authors: J. Jormanainen, T. Hovatta, I. M. Christie, E. Lindfors, M. Petropoulou, I. Liodakis

Abstract: The origin of extremely fast variability is one of the long-standing questions in the gamma-ray astronomy of blazars. While many models explain the slower, lower energy variability, they cannot easily account for such fast flares reaching hour-to-minute time scales. Magnetic reconnection, a process where magnetic energy is converted to the acceleration of relativistic particles in the reconnection… ▽ More The origin of extremely fast variability is one of the long-standing questions in the gamma-ray astronomy of blazars. While many models explain the slower, lower energy variability, they cannot easily account for such fast flares reaching hour-to-minute time scales. Magnetic reconnection, a process where magnetic energy is converted to the acceleration of relativistic particles in the reconnection layer, is a candidate solution to this problem. In this work, we employ state-of-the-art particle-in-cell simulations in a statistical comparison with observations of a flaring episode of a well-known blazar, Mrk 421, at very high energy (VHE, E > 100 GeV). We tested the predictions of our model by generating simulated VHE light curves that we compared quantitatively with methods that we have developed for a precise evaluation of theoretical and observed data. With our analysis, we can constrain the parameter space of the model, such as the magnetic field strength of the unreconnected plasma, viewing angle and the reconnection layer orientation in the blazar jet. Our analysis favours parameter spaces with magnetic field strength 0.1 G, rather large viewing angles (6-8 degrees), and misaligned layer angles, offering a strong candidate explanation for the Doppler crisis often observed in the jets of high synchrotron peaking blazars. △ Less

Submitted 11 August, 2023; originally announced August 2023.

Comments: Accepted for publication in A&A

Journal ref: A&A 678, A140 (2023)

JAWS: Just A Wild Shot for Cinematic Transfer in Neural Radiance Fields

Authors: Xi Wang, Robin Courant, Jinglei Shi, Eric Marchand, Marc Christie

Abstract: This paper presents JAWS, an optimization-driven approach that achieves the robust transfer of visual cinematic features from a reference in-the-wild video clip to a newly generated clip. To this end, we rely on an implicit-neural-representation (INR) in a way to compute a clip that shares the same cinematic features as the reference clip. We propose a general formulation of a camera optimization… ▽ More This paper presents JAWS, an optimization-driven approach that achieves the robust transfer of visual cinematic features from a reference in-the-wild video clip to a newly generated clip. To this end, we rely on an implicit-neural-representation (INR) in a way to compute a clip that shares the same cinematic features as the reference clip. We propose a general formulation of a camera optimization problem in an INR that computes extrinsic and intrinsic camera parameters as well as timing. By leveraging the differentiability of neural representations, we can back-propagate our designed cinematic losses measured on proxy estimators through a NeRF network to the proposed cinematic parameters directly. We also introduce specific enhancements such as guidance maps to improve the overall quality and efficiency. Results display the capacity of our system to replicate well known camera sequences from movies, adapting the framing, camera parameters and timing of the generated video clip to maximize the similarity with the reference clip. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: CVPR 2023. Project page with videos and code: http://www.lix.polytechnique.fr/vista/projects/2023_cvpr_wang

New isomeric transition in $^{36}$Mg: Bridging the N=20 and N=28 islands of inversion

Authors: M. Madurga, J. M. Christie, Z. Xu, R. Grzywacz, A. Poves, T. King, J. M. Allmond, A. Chester, I. Cox, J. Farr, I. Fletcher, J. Heideman, D. Hoskins, A. Laminack, S. Liddick, S. Neupane, A. L. Richard, N. Shimizu, P. Shuai, K. Siegl, Y. Utsuno, P. Wagenknecht, R. Yokoyama

Abstract: We observed a new isomeric gamma transition at 168 keV in $^{36}$Mg, with a half-life of T$_{1/2}$=[130-500]$(\pm40)(^{+800}_{-20})_{sys}$ ns. We propose that the observed transition de-excites a new 0$^+$ isomeric state and populates the previously known first 2$^+$ state. The existence of this isomer is consistent with the predictions of the large-scale shell model calculations of $^{36}$Mg usin… ▽ More We observed a new isomeric gamma transition at 168 keV in $^{36}$Mg, with a half-life of T$_{1/2}$=[130-500]$(\pm40)(^{+800}_{-20})_{sys}$ ns. We propose that the observed transition de-excites a new 0$^+$ isomeric state and populates the previously known first 2$^+$ state. The existence of this isomer is consistent with the predictions of the large-scale shell model calculations of $^{36}$Mg using the sdpf-u-mix interaction. The observed excitation energy of the second 0$^+$ state is caused by the small energy separation between two prolate-deformed configurations where the intruder configuration corresponds to two neutron excitations from the {\it sd} to the {\it pf} shell. Within this interpretation, $^{36}$Mg becomes the crossing point between nuclei in which ground state deformed/superdeformed configurations are caused by the dominance of N=20 intruders ($^{32,34}$Mg) and nuclei where deformed configurations are associated with N=28 intruders ($^{38}$Mg and beyond). We found the lack of three-body monopole corrections in other effective interactions results in a predominance of N=20 intruder configurations past $^{38}$Mg incompatible with our observation. We conclude that $^{36}$Mg bridges the N=20 and N=28 islands of inversion, forming the so-called Big Island of Deformation. △ Less

Submitted 18 June, 2024; v1 submitted 27 January, 2023; originally announced January 2023.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. C 109, L061301 (2024)

Striped Jets in Post Neutron Star Merger Systems

Authors: Emma Kaufman, I. M. Christie, A. Lalakos, A. Tchekhovskoy, D. Giannios

Abstract: Models invoking magnetic reconnection as the particle acceleration mechanism within relativistic jets often adopt a gradual energy dissipation profile within the jet. However, such a profile has yet to be reproduced in first-principles simulations. Here, we perform a suite of 3D general relativistic magnetohydrodynamic simulations of post-neutron star merger disks with an initially purely toroidal… ▽ More Models invoking magnetic reconnection as the particle acceleration mechanism within relativistic jets often adopt a gradual energy dissipation profile within the jet. However, such a profile has yet to be reproduced in first-principles simulations. Here, we perform a suite of 3D general relativistic magnetohydrodynamic simulations of post-neutron star merger disks with an initially purely toroidal magnetic field. We explore the variations in both the microphysics (e.g., nuclear recombination, neutrino emission) and system parameters (e.g., disk mass). In all our simulations, we find the formation of magnetically striped jets. The stripes result from the reversals in the poloidal magnetic flux polarity generated in the accretion disk. The simulations display large variations in the distributions of stripe duration, $τ$, and power, $\langle P_Φ \rangle$. We find that more massive disks produce more powerful stripes, the most powerful of which reaches $\langle P_Φ \rangle \sim 10^{49}$~erg~s$^{-1}$ at $τ\sim 20$~ms. The power and variability that result from the magnetic reconnection of the stripes agree with those inferred in short duration gamma-ray bursts. We find that the dissipation profile of the cumulative energy is roughly a power-law in both radial distance, $z$, and $τ$, with the slope in the range, $\sim 1.7-3$; more massive disks display larger slopes. △ Less

Submitted 12 December, 2022; originally announced December 2022.

Bridging Bondi and Event Horizon Scales: 3D GRMHD Simulations Reveal X-Shaped Radio Galaxy Morphology

Authors: Aretaios Lalakos, Ore Gottlieb, Nick Kaaz, Koushik Chatterjee, Matthew Liska, Ian M. Christie, Alexander Tchekhovskoy, Irina Zhuravleva, Elena Nokhrina

Abstract: X-shaped radio galaxies (XRGs) produce misaligned X-shaped jet pairs and make up $\lesssim10\%$ of radio galaxies. XRGs are thought to emerge in galaxies featuring a binary supermassive black hole ($\rm SMBH$), $\rm SMBH$ merger, or large-scale ambient medium asymmetry. We demonstrate that XRG morphology can naturally form without such special, preexisting conditions. Our 3D general-relativistic m… ▽ More X-shaped radio galaxies (XRGs) produce misaligned X-shaped jet pairs and make up $\lesssim10\%$ of radio galaxies. XRGs are thought to emerge in galaxies featuring a binary supermassive black hole ($\rm SMBH$), $\rm SMBH$ merger, or large-scale ambient medium asymmetry. We demonstrate that XRG morphology can naturally form without such special, preexisting conditions. Our 3D general-relativistic magnetohydrodynamic (GRMHD) simulation for the first time follows magnetized rotating gas from outside the $\rm SMBH$ sphere of influence of radius $R_{\rm B}$ to the $\rm SMBH$ of gravitational radius $R_{\rm g}$, at the largest scale separation $R_{\rm B}/R_{\rm g} = 10^3$ to date. Initially, our axisymmetric system of constant-density hot gas contains weak vertical magnetic field and rotates in an equatorial plane of a rapidly spinning $\rm SMBH$. We seed the gas with small-scale $2\%$-level pressure perturbations. Infalling gas forms an accretion disk, and the $\rm SMBH$ launches relativistically-magnetized collimated jets reaching well outside $R_{\rm B}$. Under the pressure of the infalling gas, the jets intermittently turn on and off, erratically wobble, and inflate pairs of cavities in different directions, resembling an X-shaped jet morphology. Synthetic X-ray images reveal multiple pairs of jet-powered shocks and cavities. Large-scale magnetic flux accumulates on the $\rm SMBH$, becomes dynamically important, and leads to a magnetically arrested disk state. The $\rm SMBH$ accretes at $2\%$ of the Bondi rate ($\dot{M}\simeq2.4\times10^{-3}M_{\odot}\,{\rm yr}^{-1}$ for M87*), and launches twin jets at $η=150\%$ efficiency. These jets are powerful enough ($P_{\rm jets}\simeq2\times10^{44}\,{\rm erg\,s}^{-1}$) to escape along the spin axis and end the short-lived jets state whose transient nature can account for the rarity of XRGs △ Less

Submitted 16 February, 2022; originally announced February 2022.

Comments: 10 pages, 4 figures

A Multi-Protocol, Secure, and Dynamic Data Storage Integration Frameworkfor Multi-tenanted Science Gateway Middleware

Authors: Dimuthu Wannipurage, Isuru Ranawaka, Eroma Abeysinghe, Marcus Christie, Suresh Marru, Marlon Pierce

Abstract: Science gateways are user-centric, end-to-end cyberinfrastructure for managing scientific data and executions of computational software on distributed resources. In order to simplify the creation and management of science gateways, we have pursued a multi-tenanted, platform-as-a-service approach that allows multiple gateway front-ends (portals) to be integrated with a consolidated middleware that… ▽ More Science gateways are user-centric, end-to-end cyberinfrastructure for managing scientific data and executions of computational software on distributed resources. In order to simplify the creation and management of science gateways, we have pursued a multi-tenanted, platform-as-a-service approach that allows multiple gateway front-ends (portals) to be integrated with a consolidated middleware that manages the movement of data and the execution of workflows on multiple back-end scientific computing resources. An important challenge for this approach is to provide an end-to-end data movement and management solution that allows gateway users to integrate their own data stores with the gateway platform. These user-provided data stores may include commercial cloud-based object store systems, third-party data stores accessed through APIs such as REST endpoints, and users' own local storage resources. In this paper, we present a solution design and implementation based on the integration of a managed file transfer (MFT) service (Airavata MFT) into the platform. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Applications And Potentials Of Intelligent Swarms For Magnetospheric Studies

Authors: Raj Thilak Rajan, Shoshana Ben-Maor, Shaziana Kaderali, Calum Turner, Mohammed Milhim, Catrina Melograna, Dawn Haken, Gary Paul, Vedant, Sreekumar V, Johannes Weppler, Yosephine Gumulya, Riccardo Bunt, Asia Bulgarini, Maurice Marnat, Kadri Bussov, Frederick Pringle, Jusha Ma, Rushanka Amrutkar, Miguel Coto, Jiang He, Zijian Shi, Shahd Hayder, Dina Saad Fayez Jaber, Junchao Zuo , et al. (10 additional authors not shown)

Abstract: Earth's magnetosphere is vital for today's technologically dependent society. To date, numerous design studies have been conducted and over a dozen science missions have own to study the magnetosphere. However, a majority of these solutions relied on large monolithic satellites, which limited the spatial resolution of these investigations, as did the technological limitations of the past. To count… ▽ More Earth's magnetosphere is vital for today's technologically dependent society. To date, numerous design studies have been conducted and over a dozen science missions have own to study the magnetosphere. However, a majority of these solutions relied on large monolithic satellites, which limited the spatial resolution of these investigations, as did the technological limitations of the past. To counter these limitations, we propose the use of a satellite swarm carrying numerous and distributed payloads for magnetospheric measurements. Our mission is named APIS (Applications and Potentials of Intelligent Swarms), which aims to characterize fundamental plasma processes in the Earth's magnetosphere and measure the effect of the solar wind on our magnetosphere. We propose a swarm of 40 CubeSats in two highly-elliptical orbits around the Earth, which perform radio tomography in the magnetotail at 8-12 Earth Radii (RE) downstream, and the subsolar magnetosphere at 8-12RE upstream. In addition, in-situ measurements of the magnetic and electric fields, plasma density will be performed by on-board instruments. In this article, we present an outline of previous missions and designs for magnetospheric studies, along with the science drivers and motivation for the APIS mission. Furthermore, preliminary design results are included to show the feasibility of such a mission. The science requirements drive the APIS mission design, the mission operation and the system requirements. In addition to the various science payloads, critical subsystems of the satellites are investigated e.g., navigation, communication, processing and power systems. We summarize our findings, along with the potential next steps to strengthen our design study. △ Less

Submitted 4 July, 2021; originally announced July 2021.

Comments: Accepted in Acta Astronautica

Journal ref: Acta Astronautica, Elsevier, 2021

Where to look at the movies : Analyzing visual attention to understand movie editing

Authors: Alexandre Bruckert, Marc Christie, Olivier Le Meur

Abstract: In the process of making a movie, directors constantly care about where the spectator will look on the screen. Shot composition, framing, camera movements or editing are tools commonly used to direct attention. In order to provide a quantitative analysis of the relationship between those tools and gaze patterns, we propose a new eye-tracking database, containing gaze pattern information on movie s… ▽ More In the process of making a movie, directors constantly care about where the spectator will look on the screen. Shot composition, framing, camera movements or editing are tools commonly used to direct attention. In order to provide a quantitative analysis of the relationship between those tools and gaze patterns, we propose a new eye-tracking database, containing gaze pattern information on movie sequences, as well as editing annotations, and we show how state-of-the-art computational saliency techniques behave on this dataset. In this work, we expose strong links between movie editing and spectators scanpaths, and open several leads on how the knowledge of editing information could improve human visual attention modeling for cinematic content. The dataset generated and analysed during the current study is available at https://github.com/abruckert/eye_tracking_filmmaking △ Less

Submitted 26 February, 2021; originally announced February 2021.

Inter-Plasmoid Compton Scattering and the Compton Dominance of BL Lacs

Authors: I. M. Christie, M. Petropoulou, L. Sironi, D. Giannios

Abstract: Blazar emission models based on magnetic reconnection succeed in reproducing many observed spectral and temporal features, including the short-duration luminous flaring events. Plasmoids, a self-consistent by-product of the tearing instability in the reconnection layer, can be the main source of blazar emission. Kinetic simulations of relativistic reconnection have demonstrated that plasmoids are… ▽ More Blazar emission models based on magnetic reconnection succeed in reproducing many observed spectral and temporal features, including the short-duration luminous flaring events. Plasmoids, a self-consistent by-product of the tearing instability in the reconnection layer, can be the main source of blazar emission. Kinetic simulations of relativistic reconnection have demonstrated that plasmoids are characterized by rough energy equipartition between their radiating particles and magnetic fields. This is the main reason behind the apparent shortcoming of plasmoid-dominated emission models to explain the observed Compton ratios of BL Lac objects. Here, we demonstrate that the radiative interactions among plasmoids, which have been neglected so far, can assist in alleviating this contradiction. We show that photons emitted by large, slow-moving plasmoids can be a potentially important source of soft photons to be then up-scattered, via inverse Compton, by small fast-moving, neighboring plasmoids. This inter-plasmoid Compton scattering process can naturally occur throughout the reconnection layer, imprinting itself as an increase in the observed Compton ratios from those short and luminous plasmoid-powered flares within BL Lac sources, while maintaining energy equipartition between radiating particles and magnetic fields. △ Less

Submitted 6 November, 2019; v1 submitted 7 August, 2019; originally announced August 2019.

Comments: 7 pages, 5 figures

Deep Saliency Models : The Quest For The Loss Function

Authors: Alexandre Bruckert, Hamed R. Tavakoli, Zhi Liu, Marc Christie, Olivier Le Meur

Abstract: Recent advances in deep learning have pushed the performances of visual saliency models way further than it has ever been. Numerous models in the literature present new ways to design neural networks, to arrange gaze pattern data, or to extract as much high and low-level image features as possible in order to create the best saliency representation. However, one key part of a typical deep learning… ▽ More Recent advances in deep learning have pushed the performances of visual saliency models way further than it has ever been. Numerous models in the literature present new ways to design neural networks, to arrange gaze pattern data, or to extract as much high and low-level image features as possible in order to create the best saliency representation. However, one key part of a typical deep learning model is often neglected: the choice of the loss function. In this work, we explore some of the most popular loss functions that are used in deep saliency models. We demonstrate that on a fixed network architecture, modifying the loss function can significantly improve (or depreciate) the results, hence emphasizing the importance of the choice of the loss function when designing a model. We also introduce new loss functions that have never been used for saliency prediction to our knowledge. And finally, we show that a linear combination of several well-chosen loss functions leads to significant improvements in performances on different datasets as well as on a different network architecture, hence demonstrating the robustness of a combined metric. △ Less

Submitted 4 July, 2019; originally announced July 2019.

Comments: 10 pages, 4 figures

The Role of Magnetic Field Geometry in the Evolution of Neutron Star Merger Accretion Discs

Authors: I. M. Christie, A. Lalakos, A. Tchekhovskoy, R. Fernández, F. Foucart, E. Quataert, D. Kasen

Abstract: Neutron star mergers are unique laboratories of accretion, ejection, and r-process nucleosynthesis. We used 3D general relativistic magnetohydrodynamic simulations to study the role of the post-merger magnetic geometry in the evolution of merger remnant discs around stationary Kerr black holes. Our simulations fully capture mass accretion, ejection, and jet production, owing to their exceptionally… ▽ More Neutron star mergers are unique laboratories of accretion, ejection, and r-process nucleosynthesis. We used 3D general relativistic magnetohydrodynamic simulations to study the role of the post-merger magnetic geometry in the evolution of merger remnant discs around stationary Kerr black holes. Our simulations fully capture mass accretion, ejection, and jet production, owing to their exceptionally long duration exceeding $4$ s. Poloidal post-merger magnetic field configurations produce jets with energies $E_\mathrm{jet} \sim (4{-}30)\times10^{50}$ erg, isotropic equivalent energies $E_\mathrm{iso}\sim(4{-}20)\times10^{52}$ erg, opening angles $θ_\mathrm{jet}\sim6{-}13^\circ$, and durations $t_j\lesssim1$ s. Accompanying the production of jets is the ejection of $f_\mathrm{ej}\sim30{-}40\%$ of the post-merger disc mass, continuing out to times $> 1$ s. We discover that a more natural, purely toroidal post-merger magnetic field geometry generates large-scale poloidal magnetic flux of alternating polarity and striped jets. The first stripe, of $E_\mathrm{jet}\simeq2\times10^{48}\,\mathrm{erg}$, $E_\mathrm{iso}\sim10^{51}$ erg, $θ_\mathrm{jet}\sim3.5{-}5^\circ$, and $t_j\sim0.1$ s, is followed by $\gtrsim4$ s of striped jet activity with $f_\mathrm{ej}\simeq27\%$. The dissipation of such stripes could power the short gamma-ray burst (sGRB) prompt emission. Our simulated jet energies and durations span the range of sGRBs. We find that although the blue kilonova component is initially hidden from view by the red component, it expands faster, outruns the red component, and becomes visible to off-axis observers. In comparison to GW 170817/GRB 170817A, our simulations under-predict the mass of the blue relative to red component by a factor of few. Including the dynamical ejecta and neutrino absorption may reduce this tension. △ Less

Submitted 3 July, 2019; originally announced July 2019.

Comments: 14 pages, 12 figures

Spherical topological-insulator nanoparticles: Quantum size effects and optical transitions

Authors: L. Gioia, M. G. Christie, U. Zülicke, M. Governale, A. J. Sneyd

Abstract: We have investigated the interplay between band inversion and size quantization in spherically shaped nanoparticles made from topological-insulator (TI) materials. A general theoretical framework is developed based on a versatile continuum-model description of the TI bulk band structure and the assumption of a hard-wall mass confinement. Analytical results are obtained for the wave functions of si… ▽ More We have investigated the interplay between band inversion and size quantization in spherically shaped nanoparticles made from topological-insulator (TI) materials. A general theoretical framework is developed based on a versatile continuum-model description of the TI bulk band structure and the assumption of a hard-wall mass confinement. Analytical results are obtained for the wave functions of single-electron energy eigenstates and the matrix elements for optical transitions between them. As expected from spherical symmetry, quantized levels in TI nanoparticles can be labeled by quantum numbers $j$ and $m=-j, -j+1, \dots, j$ for total angular momentum and its projection on an arbitrary axis. The fact that TIs are narrow-gap materials, where the charge-carrier dynamics is described by a type of two-flavor Dirac model, requires $j$ to assume half-integer values and also causes a doubling of energy-level degeneracy where two different classes of states are distinguished by being parity eigenstates with eigenvalues $(-1)^{j\mp 1/2}$. The existence of energy eigenstates having the same $j$ but opposite parity enables optical transitions where $j$ is conserved, in addition to those adhering to the familiar selection rule where $j$ changes by $\pm 1$. All optical transitions satisfy the usual selection rule $Δm = 0, \pm 1$. We treat intra- and inter-band optical transitions on the same footing and establish ways for observing unusual quantum-size effects in TI nanoparticles, including oscillatory dependences of the band gap and of transition amplitudes on the nanoparticle radius. Our theory also provides a unified perspective on multi-band models for charge carriers in semiconductors and Dirac fermions from elementary-particle physics. △ Less

Submitted 31 October, 2019; v1 submitted 19 June, 2019; originally announced June 2019.

Comments: 13 pages, 4 figures, RevTex4.2, v2: extended discussion of optical transitions, including new Figs. 3 & 4, to appear in PRB

Journal ref: Phys. Rev. B 100, 205417 (2019)

Radiative Signatures of Plasmoid-Dominated Reconnection in Blazar Jets

Authors: I. M. Christie, M. Petropoulou, L. Sironi, D. Giannios

Abstract: The multi-wavelength spectral and temporal variability observed in blazars set tight constraints on current theoretical emission models. Here, we investigate the relativistic magnetic reconnection process as a source of blazar emission in which quasi-spherical plasmoids, containing relativistic particles and magnetic fields, are associated with the emission sites in blazar jets. By coupling recent… ▽ More The multi-wavelength spectral and temporal variability observed in blazars set tight constraints on current theoretical emission models. Here, we investigate the relativistic magnetic reconnection process as a source of blazar emission in which quasi-spherical plasmoids, containing relativistic particles and magnetic fields, are associated with the emission sites in blazar jets. By coupling recent two-dimensional particle-in-cell simulations of relativistic reconnection with a time-dependent radiative transfer code, we compute the non-thermal emission from a chain of plasmoids formed during a reconnection event. The derived photon spectra display characteristic features observed in both BL Lac sources and flat spectrum radio quasars, with the distinction made by varying the strength of the external photon fields, the jet magnetization, and the number of pairs per proton contained within. Light curves produced from reconnection events are composed of many fast and powerful flares that appear on excess of a slower evolving envelope produced by the cumulative emission of medium-sized plasmoids. The observed variability is highly dependent upon the orientation of the reconnection layer with respect to the blazar jet axis and to the observer. Our model provides a physically motivated framework for explaining the multi-timescale blazar variability across the entire electromagnetic spectrum. △ Less

Submitted 3 December, 2018; v1 submitted 20 July, 2018; originally announced July 2018.

Comments: 19 pages, 14 figures

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 482, Issue 1, p.65-82 (2019)

Directing Cinematographic Drones

Authors: Quentin Galvane, Christophe Lino, Marc Christie, Julien Fleureau, Fabien Servant, Francois-Louis Tariolle, Philippe Guillotel

Abstract: Quadrotor drones equipped with high quality cameras have rapidely raised as novel, cheap and stable devices for filmmakers. While professional drone pilots can create aesthetically pleasing videos in short time, the smooth -- and cinematographic -- control of a camera drone remains challenging for most users, despite recent tools that either automate part of the process or enable the manual design… ▽ More Quadrotor drones equipped with high quality cameras have rapidely raised as novel, cheap and stable devices for filmmakers. While professional drone pilots can create aesthetically pleasing videos in short time, the smooth -- and cinematographic -- control of a camera drone remains challenging for most users, despite recent tools that either automate part of the process or enable the manual design of waypoints to create drone trajectories. This paper proposes to move a step further towards more accessible cinematographic drones by designing techniques to automatically or interactively plan quadrotor drone motions in 3D dynamic environments that satisfy both cinematographic and physical quadrotor constraints. We first propose the design of a Drone Toric Space as a dedicated camera parameter space with embedded constraints and derive some intuitive on-screen viewpoint manipulators. Second, we propose a specific path planning technique which ensures both that cinematographic properties can be enforced along the path, and that the path is physically feasible by a quadrotor drone. At last, we build on the Drone Toric Space and the specific path planning technique to coordinate the motion of multiple drones around dynamic targets. A number of results then demonstrate the interactive and automated capacities of our approaches on a number of use-cases. △ Less

Submitted 14 December, 2017; v1 submitted 12 December, 2017; originally announced December 2017.

X-ray mapping of the stellar wind in the binary PSR J2032+4127/MT91 213

Authors: M. Petropoulou, G. Vasilopoulos, I. M. Christie, D. Giannios, M. J. Coe

Abstract: PSR J2032+4127 is a young and rapidly rotating pulsar on a highly eccentric orbit around the high-mass Be star MT91 213. X-ray monitoring of the binary system over a $\sim$4000 day period with Swift has revealed an increase of the X-ray luminosity which we attribute to the synchrotron emission of the shocked pulsar wind. We use Swift X-ray observations to infer a clumpy stellar wind with $r^{-2}$… ▽ More PSR J2032+4127 is a young and rapidly rotating pulsar on a highly eccentric orbit around the high-mass Be star MT91 213. X-ray monitoring of the binary system over a $\sim$4000 day period with Swift has revealed an increase of the X-ray luminosity which we attribute to the synchrotron emission of the shocked pulsar wind. We use Swift X-ray observations to infer a clumpy stellar wind with $r^{-2}$ density profile and constrain the Lorentz factor of the pulsar wind to $10^5<γ_w<10^6$. We investigate the effects of an axisymmetric stellar wind with polar gradient on the X-ray emission. Comparison of the X-ray light curve hundreds of days before and after the periastron can be used to explore the polar structure of the wind. △ Less

Submitted 13 October, 2017; originally announced October 2017.

Comments: 5 pages, submitted to MNRAS Letters

Plasmoid statistics in relativistic magnetic reconnection

Authors: M. Petropoulou, I. M. Christie, L. Sironi, D. Giannios

Abstract: Plasmoids, quasi-spherical regions of plasma containing magnetic fields and high-energy particles, are a self-consistent by-product of the reconnection process in the relativistic regime. Recent two-dimensional particle-in-cell (PIC) simulations have shown that plasmoids can undergo a variety of processes (e.g. mergers, bulk acceleration, growth, and advection) within the reconnection layer. We de… ▽ More Plasmoids, quasi-spherical regions of plasma containing magnetic fields and high-energy particles, are a self-consistent by-product of the reconnection process in the relativistic regime. Recent two-dimensional particle-in-cell (PIC) simulations have shown that plasmoids can undergo a variety of processes (e.g. mergers, bulk acceleration, growth, and advection) within the reconnection layer. We developed a Monte Carlo (MC) code, benchmarked with the recent PIC simulations, to examine the effects of these processes on the steady-state size and momentum distributions of the plasmoid chain. The differential plasmoid size distribution is shown to be a power law, $N(w)\propto w^{-χ}$, ranging from a few plasma skin depths to $\sim 0.1$ of the reconnection layer's length. We demonstrate numerically and analytically that the power law slope $χ$ is linearly dependent upon the ratio of the plasmoid acceleration and growth rates and that it slightly decreases (from $\sim 2$ to $\sim 1.3$) with increasing plasma magnetization (from 3 to 50). We perform a detailed comparison of our results with those of recent PIC simulations and briefly discuss the astrophysical implications of our findings through the representative case of flaring events from blazar jets. △ Less

Submitted 2 October, 2017; originally announced October 2017.

Comments: 18 pages, 19 figures, submitted to MNRAS

Computing cohomology of configuration spaces

Authors: Megan Maguire, with Appendix by Matthew Christie, Derek Francour

Abstract: We give a concrete method to explicitly compute the rational cohomology of the unordered configuration spaces of connected, oriented, closed, even-dimensional manifolds of finite type which we have implemented in Sage [S+09]. As an application, we give acomplete computation of the stable and unstable rational cohomology of unordered configuration spaces in some cases, including that of… ▽ More We give a concrete method to explicitly compute the rational cohomology of the unordered configuration spaces of connected, oriented, closed, even-dimensional manifolds of finite type which we have implemented in Sage [S+09]. As an application, we give acomplete computation of the stable and unstable rational cohomology of unordered configuration spaces in some cases, including that of $\mathbb{CP}^3$ and a genus 1 Riemann surface, which is equivalently the homology of the elliptic braid group. In an appendix, we also give large tables of unstable and stable Betti numbers of unordered configuration spaces. From these, we empirically observe stability phenomenon in the unstable cohomology of unordered configuration spaces of some manifolds, some of which we prove and some of which we state as conjecture. △ Less

Submitted 19 December, 2016; originally announced December 2016.

Comments: 55 pages, 2 figures

Modelling Accretion Disk and Stellar Wind Interactions: the Case of Sgr A*

Authors: I. M. Christie, M. Petropoulou, P. Mimica, D. Giannios

Abstract: Sgr A* is an ideal target to study low-luminosity accreting systems. It has been recently proposed that properties of the accretion flow around Sgr A* can be probed through its interactions with the stellar wind of nearby massive stars belonging to the S-cluster. When a star intercepts the accretion disk, the ram and thermal pressures of the disk terminate the stellar wind leading to the formation… ▽ More Sgr A* is an ideal target to study low-luminosity accreting systems. It has been recently proposed that properties of the accretion flow around Sgr A* can be probed through its interactions with the stellar wind of nearby massive stars belonging to the S-cluster. When a star intercepts the accretion disk, the ram and thermal pressures of the disk terminate the stellar wind leading to the formation of a bow shock structure. Here, a semi-analytical model is constructed which describes the geometry of the termination shock formed in the wind. With the employment of numerical hydrodynamic simulations, this model is both verified and extended to a region prone to Kelvin-Helmholtz instabilities. Because the characteristic wind and stellar velocities are in $\sim10^{8}$ cm s$^{-1}$ range, the shocked wind may produce detectable X-rays via thermal bremsstrahlung emission. The application of this model to the pericenter passage of S2, the brightest member of the S-cluster, shows that the shocked wind produces roughly a month long X-ray flare with a peak luminosity of $L\approx 4 \times 10^{33}$ erg s$^{-1}$ for a stellar mass-loss rate, disk number density, and thermal pressure strength of $\dot{M}_{\rm w}= 10^{-7} M_\odot\, {\rm yr}^{-1}$, $n_{\rm d} = 10^{5}$ cm$^{-3}$, and $α=0.1$, respectively. This peak luminosity is comparable to the quiescent X-ray emission detected from Sgr A* and is within the detection capabilities of current X-ray observatories. Its detection could constrain the density and thickness of the disk at a distance of $\sim 3000$ gravitational radii from the supermassive black hole. △ Less

Submitted 8 April, 2016; v1 submitted 27 January, 2016; originally announced January 2016.

Comments: 12 pages, 9 figures, accepted by MNRAS

Mathematical Modelling of Heart Rate Changes in the Mouse

Authors: Mark Christie, Manasi Nandi, Yanika Borg, Valentina Carapella, Gary Mirams, Philip Aston, Saziye Bayram, Radostin D. Simitev, Jennifer Siggers, Buddhapriya Chakrabarti

Abstract: The CVS is composed of numerous interacting and dynamically regulated physiological subsystems which each generate measurable periodic components such that the CVS can itself be presented as a system of weakly coupled oscillators. The interactions between these oscillators generate a chaotic blood pressure waveform signal, where periods of apparent rhythmicity are punctuated by asynchronous behavi… ▽ More The CVS is composed of numerous interacting and dynamically regulated physiological subsystems which each generate measurable periodic components such that the CVS can itself be presented as a system of weakly coupled oscillators. The interactions between these oscillators generate a chaotic blood pressure waveform signal, where periods of apparent rhythmicity are punctuated by asynchronous behaviour. It is this variability which seems to characterise the normal state. We used a standard experimental data set for the purposes of analysis and modelling. Arterial blood pressure waveform data was collected from conscious mice instrumented with radiotelemetry devices over $24$ hours, at a $100$ Hz and $1$ kHz time base. During a $24$ hour period, these mice display diurnal variation leading to changes in the cardiovascular waveform. We undertook preliminary analysis of our data using Fourier transforms and subsequently applied a series of both linear and nonlinear mathematical approaches in parallel. We provide a minimalistic linear and nonlinear coupled oscillator model and employed spectral and Hilbert analysis as well as a phase plane analysis. This provides a route to a three way synergistic investigation of the original blood pressure data by a combination of physiological experiments, data analysis viz. Fourier and Hilbert transforms and attractor reconstructions, and numerical solutions of linear and nonlinear coupled oscillator models. We believe that a minimal model of coupled oscillator models that quantitatively describes the complex physiological data could be developed via such a method. Further investigations of each of these techniques will be explored in separate publications. △ Less

Submitted 5 October, 2015; originally announced October 2015.

Comments: This is a report that summarises the outcomes from the UK MMSG NC3R's Study Group meeting in London, 15th-18th April 2013 in response to a problem entitled `Modelling heart rate changes in the mouse as a series of delayed, weakly coupled oscillators', presented by MC and MN

Emulation of Higher-Order Tensors in Manifold Monte Carlo Methods for Bayesian Inverse Problems

Authors: Shiwei Lan, Tan Bui-Thanh, Mike Christie, Mark Girolami

Abstract: The Bayesian approach to Inverse Problems relies predominantly on Markov Chain Monte Carlo methods for posterior inference. The typical nonlinear concentration of posterior measure observed in many such Inverse Problems presents severe challenges to existing simulation based inference methods. Motivated by these challenges the exploitation of local geometric information in the form of covariant gr… ▽ More The Bayesian approach to Inverse Problems relies predominantly on Markov Chain Monte Carlo methods for posterior inference. The typical nonlinear concentration of posterior measure observed in many such Inverse Problems presents severe challenges to existing simulation based inference methods. Motivated by these challenges the exploitation of local geometric information in the form of covariant gradients, metric tensors, Levi-Civita connections, and local geodesic flows, have been introduced to more effectively locally explore the configuration space of the posterior measure. However, obtaining such geometric quantities usually requires extensive computational effort and despite their effectiveness affect the applicability of these geometrically-based Monte Carlo methods. In this paper we explore one way to address this issue by the construction of an emulator of the model from which all geometric objects can be obtained in a much more computationally feasible manner. The main concept is to approximate the geometric quantities using a Gaussian Process emulator which is conditioned on a carefully chosen design set of configuration points, which also determines the quality of the emulator. To this end we propose the use of statistical experiment design methods to refine a potentially arbitrarily initialized design online without destroying the convergence of the resulting Markov chain to the desired invariant measure. The practical examples considered in this paper provide a demonstration of the significant improvement possible in terms of computational loading suggesting this is a promising avenue of further development. △ Less

Submitted 23 July, 2015; v1 submitted 22 July, 2015; originally announced July 2015.

Comments: 46 pages, 11 figures

Interval Constraint Solving for Camera Control and Motion Planning

Authors: Frederic Benhamou, Frederic Goualard, Eric Languenou, Marc Christie

Abstract: Many problems in robust control and motion planning can be reduced to either find a sound approximation of the solution space determined by a set of nonlinear inequalities, or to the ``guaranteed tuning problem'' as defined by Jaulin and Walter, which amounts to finding a value for some tuning parameter such that a set of inequalities be verified for all the possible values of some perturbation… ▽ More Many problems in robust control and motion planning can be reduced to either find a sound approximation of the solution space determined by a set of nonlinear inequalities, or to the ``guaranteed tuning problem'' as defined by Jaulin and Walter, which amounts to finding a value for some tuning parameter such that a set of inequalities be verified for all the possible values of some perturbation vector. A classical approach to solve these problems, which satisfies the strong soundness requirement, involves some quantifier elimination procedure such as Collins' Cylindrical Algebraic Decomposition symbolic method. Sound numerical methods using interval arithmetic and local consistency enforcement to prune the search space are presented in this paper as much faster alternatives for both soundly solving systems of nonlinear inequalities, and addressing the guaranteed tuning problem whenever the perturbation vector has dimension one. The use of these methods in camera control is investigated, and experiments with the prototype of a declarative modeller to express camera motion using a cinematic language are reported and commented. △ Less

Submitted 20 June, 2003; v1 submitted 3 July, 2000; originally announced July 2000.

Comments: 35 pages, 13 figures, revised and extended version of a paper published in the proceedings of CP '00

ACM Class: D.3.3; D.2.2; G.1.0; H.5.1