-
Electromechanical response of saddle points in twisted hBN moiré superlattices
Authors:
Stefano Chiodini,
Giacomo Venturi,
James Kerfoot,
Jincan Zhang,
Evgeny M. Alexeev,
Takashi Taniguchi,
Kenji Watanabe,
Andrea C. Ferrari,
Antonio Ambrosio
Abstract:
In twisted layered materials (t-LMs), an inter-layer rotation can break inversion symmetry and create an interfacial array of staggered out-of-plane polarization due to AB/BA stacking registries. This symmetry breaking can also trigger the formation of edge in-plane polarizations localized along the perimeter of AB/BA regions (i.e., saddle point domains). However, a comprehensive experimental inve…
▽ More
In twisted layered materials (t-LMs), an inter-layer rotation can break inversion symmetry and create an interfacial array of staggered out-of-plane polarization due to AB/BA stacking registries. This symmetry breaking can also trigger the formation of edge in-plane polarizations localized along the perimeter of AB/BA regions (i.e., saddle point domains). However, a comprehensive experimental investigation of these features is still lacking. Here, we use piezo force microscopy to probe the electromechanical behavior of twisted hexagonal boron nitride (t-hBN). For a parallel stacking alignment of t-hBN, we reveal very narrow (width ~ 20 nm) saddle point polarizations, which we also measure in the anti-parallel configuration. These localized polarizations can still be found on a multiply-stacked t-hBN structure, determining the formation of a double moiré. We also visualize a t-hBN moiré superlattice in the topography maps with atomic force microscopy, related to the strain accumulated at the saddle point domains. Our findings imply that polarizations in t-hBN do not only point in the out-of-plane direction, but also show an in-plane component, giving rise to a much more complex 3D polarization field.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Visible-frequency hyperbolic plasmon polaritons in a natural van der Waals crystal
Authors:
Giacomo Venturi,
Andrea Mancini,
Nicola Melchioni,
Stefano Chiodini,
Antonio Ambrosio
Abstract:
Controlling light at subwavelength scales is one of the main challenges of nanophotonics. Leveraging hyperbolic polaritons supporting arbitrarily large wavevectors can lead to extreme light confinement, effectively overcoming the diffraction limit. Hyperbolicity was initially realized in artificial metamaterials, but their performances are limited by high losses in the metallic components. While r…
▽ More
Controlling light at subwavelength scales is one of the main challenges of nanophotonics. Leveraging hyperbolic polaritons supporting arbitrarily large wavevectors can lead to extreme light confinement, effectively overcoming the diffraction limit. Hyperbolicity was initially realized in artificial metamaterials, but their performances are limited by high losses in the metallic components. While recently discovered natural low-loss hyperbolic phonon polaritons initiated a revival in the interest for hyperbolic materials, they are confined to the mid-infrared frequency range, limiting their use for several applications. Some hyperbolic materials at visible frequencies have been studied, but they are either very lossy or only feature out-of-plane hyperbolicity. Here, we demonstrate the presence of low-loss, in-plane hyperbolic plasmon polaritons in the visible and near-infrared in thin films of $\mathrm{MoOCl}_2$, a natural van der Waals crystal. The polariton dispersion is predicted based on the framework of light propagation in biaxial media, and experimentally confirmed by real space nano imaging on exfoliated flakes. $\mathrm{MoOCl}_2$ constitutes a novel material platform for visible-range applications leveraging the unboundedness of hyperbolic modes, such as hyperlensing, Purcell factor enhancement and super-resolution imaging, without the drawbacks of metamaterials.
△ Less
Submitted 19 September, 2024; v1 submitted 24 May, 2024;
originally announced May 2024.
-
Automatic coarse co-registration of point clouds from diverse scan geometries: a test of detectors and descriptors
Authors:
Francesco Pirotti,
Alberto Guarnieri,
Sebastiano Chiodini,
Carlo Bettanini
Abstract:
Point clouds are collected nowadays from a plethora of sensors, some having higher accuracies and higher costs, some having lower accuracies but also lower costs. Not only there is a large choice for different sensors, but also these can be transported by different platforms, which can provide different scan geometries. In this work we test the extraction of four different keypoint detectors and t…
▽ More
Point clouds are collected nowadays from a plethora of sensors, some having higher accuracies and higher costs, some having lower accuracies but also lower costs. Not only there is a large choice for different sensors, but also these can be transported by different platforms, which can provide different scan geometries. In this work we test the extraction of four different keypoint detectors and three feature descriptors. We benchmark performance in terms of calculation time and we assess their performance in terms of accuracy in their ability in coarse automatic co-registration of two clouds that are collected with different sensors, platforms and scan geometries. One, which we define as having the higher accuracy, and thus will be used as reference, was surveyed via a UAV flight with a Riegl MiniVUX-3, the other on a bicycle with a Livox Horizon over a walking path with un-even ground.The novelty in this work consists in comparing several strategies for fast alignment of point clouds from very different surveying geometries, as the drone has a bird's eye view and the bicycle a ground-based view. An added challenge is related to the lower cost of the bicycle sensor ensemble that, together with the rough terrain, reasonably results in lower accuracy of the survey. The main idea is to use range images to capture a simplified version of the geometry of the surveyed area and then find the best features to match keypoints. Results show that NARF features detected more keypoints and resulted in a faster co-registration procedure in this scenariowhereas the accuracy of the co-registration is similar to all the combinations of keypoint detectors and features.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
Experimental Evaluation of Pose Initialization Methods for Relative Navigation Between Non-Cooperative Satellites
Authors:
Sebastiano Chiodini,
Marco Pertile,
Pierdomenico Fracchiolla,
Andrea Valmorbida,
Enrico Lorenzini,
Stefano Debei
Abstract:
In this work, we have analyzed the problem of relative pose initialization between two satellites: a chaser and a non-cooperating target. The analysis has been targeted to two close-range methods based on a monocular camera system: the Sharma-Ventura-D'Amico (SVD) method and the silhouette matching method. Both methods are based on a priori knowledge of the target geometry, but neither fiducial ma…
▽ More
In this work, we have analyzed the problem of relative pose initialization between two satellites: a chaser and a non-cooperating target. The analysis has been targeted to two close-range methods based on a monocular camera system: the Sharma-Ventura-D'Amico (SVD) method and the silhouette matching method. Both methods are based on a priori knowledge of the target geometry, but neither fiducial markers nor a priori range measurements or state information are needed. The tests were carried out using a 2U CubeSat mock-up as target attached to a motorized rotary stage to simulate its relative motion with respect to the chaser camera. A motion capture system was used as a reference instrument that provides the fiducial relative motion between the two mock-ups and allows to evaluate the performances of the initialization algorithms analyzed.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Design of a user-friendly control system for planetary rovers with CPS feature
Authors:
Sebastiano Chiodini,
Riccardo Giubilato,
Marco Pertile,
Annarita Tedesco,
Domenico Accardo,
Stefano Debei
Abstract:
In this paper, we present a user-friendly planetary rover's control system for low latency surface telerobotic. Thanks to the proposed system, an operator can comfortably give commands through the control base station to a rover using commercially available off-the-shelf (COTS) joysticks or by command sequencing with interactive monitoring on the sensed map of the environment. During operations, h…
▽ More
In this paper, we present a user-friendly planetary rover's control system for low latency surface telerobotic. Thanks to the proposed system, an operator can comfortably give commands through the control base station to a rover using commercially available off-the-shelf (COTS) joysticks or by command sequencing with interactive monitoring on the sensed map of the environment. During operations, high situational awareness is made possible thanks to 3D map visualization. The map of the environment is built on the on-board computer by processing the rover's camera images with a visual Simultaneous Localization and Mapping (SLAM) algorithm. It is transmitted via Wi-Fi and displayed on the control base station screen in near real-time. The navigation stack takes as input the visual SLAM data to build a cost map to find the minimum cost path. By interacting with the virtual map, the rover exhibits properties of a Cyber Physical System (CPS) for its self-awareness capabilities. The software architecture is based on the Robot Operative System (ROS) middleware. The system design and the preliminary field test results are shown in the paper.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Evaluation of 3D CNN Semantic Mapping for Rover Navigation
Authors:
Sebastiano Chiodini,
Luca Torresin,
Marco Pertile,
Stefano Debei
Abstract:
Terrain assessment is a key aspect for autonomous exploration rovers, surrounding environment recognition is required for multiple purposes, such as optimal trajectory planning and autonomous target identification. In this work we present a technique to generate accurate three-dimensional semantic maps for Martian environment. The algorithm uses as input a stereo image acquired by a camera mounted…
▽ More
Terrain assessment is a key aspect for autonomous exploration rovers, surrounding environment recognition is required for multiple purposes, such as optimal trajectory planning and autonomous target identification. In this work we present a technique to generate accurate three-dimensional semantic maps for Martian environment. The algorithm uses as input a stereo image acquired by a camera mounted on a rover. Firstly, images are labeled with DeepLabv3+, which is an encoder-decoder Convolutional Neural Networl (CNN). Then, the labels obtained by the semantic segmentation are combined to stereo depth-maps in a Voxel representation. We evaluate our approach on the ESA Katwijk Beach Planetary Rover Dataset.
△ Less
Submitted 17 June, 2020;
originally announced June 2020.
-
Simulation Framework for Mobile Robots in Planetary-Like Environments
Authors:
Riccardo Giubilato,
Andrea Masili,
Sebastiano Chiodini,
Marco Pertile,
Stefano Debei
Abstract:
In this paper we present a simulation framework for the evaluation of the navigation and localization metrological performances of a robotic platform. The simulator, based on ROS (Robot Operating System) Gazebo, is targeted to a planetary-like research vehicle which allows to test various perception and navigation approaches for specific environment conditions. The possibility of simulating arbitr…
▽ More
In this paper we present a simulation framework for the evaluation of the navigation and localization metrological performances of a robotic platform. The simulator, based on ROS (Robot Operating System) Gazebo, is targeted to a planetary-like research vehicle which allows to test various perception and navigation approaches for specific environment conditions. The possibility of simulating arbitrary sensor setups comprising cameras, LiDARs (Light Detection and Ranging) and IMUs makes Gazebo an excellent resource for rapid prototyping. In this work we evaluate a variety of open-source visual and LiDAR SLAM (Simultaneous Localization and Mapping) algorithms in a simulated Martian environment. Datasets are captured by driving the rover and recording sensors outputs as well as the ground truth for a precise performance evaluation.
△ Less
Submitted 17 June, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
On the Unruh effect in de Sitter space
Authors:
R. Casadio,
S. Chiodini,
A. Orlandi,
G. Acquaviva,
R. Di Criscienzo,
L. Vanzo
Abstract:
We give an interpretation of the temperature in de Sitter universe in terms of a dynamical Unruh effect associated with the Hubble sphere. As with the quantum noise perceived by a uniformly accelerated observer in static space-times, observers endowed with a proper motion can in principle detect the effect. In particular, we study a "Kodama observer" as a two-field Unruh detector for which we show…
▽ More
We give an interpretation of the temperature in de Sitter universe in terms of a dynamical Unruh effect associated with the Hubble sphere. As with the quantum noise perceived by a uniformly accelerated observer in static space-times, observers endowed with a proper motion can in principle detect the effect. In particular, we study a "Kodama observer" as a two-field Unruh detector for which we show the effect is approximately thermal. We also estimate the back-reaction of the emitted radiation and find trajectories associated with the Kodama vector fields are stable.
△ Less
Submitted 12 September, 2011; v1 submitted 15 November, 2010;
originally announced November 2010.
