-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Enhancing Sensitivity for Di-Higgs Boson Searches Using Anomaly Detection and Supervised Machine Learning Techniques
Authors:
Sergei V. Chekanov,
Wasikul Islam,
Nicholas Luongo
Abstract:
This paper explores different strategies for enhancing sensitivity to new heavy resonances that decay into two or more Higgs bosons. This is achieved using two neural network architectures: an unsupervised autoencoder for anomaly detection and a supervised classifier. The autoencoder is trained on a small fraction of Standard Model (SM) Monte Carlo simulated events to calculate the loss distributi…
▽ More
This paper explores different strategies for enhancing sensitivity to new heavy resonances that decay into two or more Higgs bosons. This is achieved using two neural network architectures: an unsupervised autoencoder for anomaly detection and a supervised classifier. The autoencoder is trained on a small fraction of Standard Model (SM) Monte Carlo simulated events to calculate the loss distribution for input events, aiding in determining the extent to which events can be considered anomalous. The supervised classifier uses the same inputs but is trained on events simulated using both beyond Standard Model (BSM) and SM processes. By applying selection cuts to the output scores, we compare the sensitivities of the two approaches.
△ Less
Submitted 16 April, 2025;
originally announced April 2025.
-
United States Muon Collider Community White Paper for the European Strategy for Particle Physics Update
Authors:
A. Abdelhamid,
D. Acosta,
P. Affleck,
G. Agarwal,
K. Agashe,
P. Agrawal,
R. Alharthy,
B. Allmond,
D. Ally,
G. Ambrosio,
O. Amram,
A. Apresyan,
A. Apyan,
C. Aruta,
C. Arzate,
P. Asadi,
J. Ashley,
A. Avasthi,
J. Backus,
R. Bartek,
A. Batz,
L. Bauerdick,
C. Bell,
S. Belomestnykh,
J. S. Berg
, et al. (280 additional authors not shown)
Abstract:
This document is being submitted to the 2024-2026 European Strategy for Particle Physics Update (ESPPU) process on behalf of the US Muon Collider community, with its preparation coordinated by the interim US Muon Collider Coordination Group. The US Muon Collider Community comprises a few hundred American scientists. The purpose of the document is to inform ESPPU about the US plans for Muon Collide…
▽ More
This document is being submitted to the 2024-2026 European Strategy for Particle Physics Update (ESPPU) process on behalf of the US Muon Collider community, with its preparation coordinated by the interim US Muon Collider Coordination Group. The US Muon Collider Community comprises a few hundred American scientists. The purpose of the document is to inform ESPPU about the US plans for Muon Collider research and development (R&D), explain how these efforts align with the broader international R&D initiatives, and present the US community vision for the future realization of this transformative project.
△ Less
Submitted 15 April, 2025; v1 submitted 30 March, 2025;
originally announced March 2025.
-
On the resolution of dual readout calorimeters
Authors:
S. Eno,
L. Wu,
M. Y. Aamir,
S. V. Chekanov,
S. Nabili,
C. Palmer
Abstract:
Dual readout calorimeters allow state-of-the-art resolutions for hadronic energy measurements. Their various incarnations are leading candidates for the calorimeter systems for future colliders. In this paper, we present a simple formula for the resolution of a dual readout calorimeter, which we verify with a toy simulation and with full simulation results. This formula can help those new to dual…
▽ More
Dual readout calorimeters allow state-of-the-art resolutions for hadronic energy measurements. Their various incarnations are leading candidates for the calorimeter systems for future colliders. In this paper, we present a simple formula for the resolution of a dual readout calorimeter, which we verify with a toy simulation and with full simulation results. This formula can help those new to dual readout calorimetry understand its strengths and limitations. The paper also highlights that the dual readout correction works not just to compensate for binding energy loss, but also for energies escaping the calorimeter or clustering algorithm. Formulae are also presented for approximate resolutions and energy scales in terms of different sources of response.
△ Less
Submitted 29 January, 2025; v1 submitted 25 January, 2025;
originally announced January 2025.
-
ADFilter -- A Web Tool for New Physics Searches With Autoencoder-Based Anomaly Detection Using Deep Unsupervised Neural Networks
Authors:
Sergei V. Chekanov,
Wasikul Islam,
Rui Zhang,
Nicholas Luongo
Abstract:
A web-based tool called ADFilter was developed to process collision events using autoencoders based on a deep unsupervised neural network. The autoencoders are trained on a small fraction of either collision data or Standard Model Monte Carlo simulations. The tool calculates loss distributions for input events, helping to determine the degree to which the events can be considered anomalous. It als…
▽ More
A web-based tool called ADFilter was developed to process collision events using autoencoders based on a deep unsupervised neural network. The autoencoders are trained on a small fraction of either collision data or Standard Model Monte Carlo simulations. The tool calculates loss distributions for input events, helping to determine the degree to which the events can be considered anomalous. It also calculates two-body invariant masses both before and after the autoencoders, as well as cross sections. Real-life examples are provided to demonstrate how the tool can be used to reinterpret existing LHC results with the goal of significantly improving exclusion limits.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
Estimation of the chances to find new phenomena at the LHC in a model-agnostic combinatorial analysis
Authors:
S. V. Chekanov
Abstract:
In this paper, we estimate the number of event topologies that have the potential to be produced in $pp$ collisions at the Large Hadron Collider (LHC) without violating kinematic and other constraints. We use numerical calculations and combinatorics, guided by large-scale Monte Carlo simulations of Standard Model (SM) processes. Then, we set the upper limit on the probability that new physics may…
▽ More
In this paper, we estimate the number of event topologies that have the potential to be produced in $pp$ collisions at the Large Hadron Collider (LHC) without violating kinematic and other constraints. We use numerical calculations and combinatorics, guided by large-scale Monte Carlo simulations of Standard Model (SM) processes. Then, we set the upper limit on the probability that new physics may escape detection, assuming a model-agnostic approach. The calculated probability is unexpectedly large, and the fact that the LHC has not found new physics until now is not entirely surprising. We argue that the optimal direction for maximizing the chances of finding new physics is to use unsupervised machine learning for anomaly detection or algorithms designed for event classification.
△ Less
Submitted 16 May, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Geant4 simulations of sampling and homogeneous hadronic calorimeters with dual readout for future colliders
Authors:
S. V. Chekanov,
S. Eno,
S. Magill,
C. Palmer,
L. Wu
Abstract:
Hadronic calorimeters with dual readout measure both scintillation and Cherenkov lights produced in their active media. They offer improvements in energy resolution and, therefore, have become increasingly interesting due to the need for precision jet measurements at Higgs factories. This paper presents Geant4 simulations of single-particle responses in sampling and homogeneous calorimeters, and d…
▽ More
Hadronic calorimeters with dual readout measure both scintillation and Cherenkov lights produced in their active media. They offer improvements in energy resolution and, therefore, have become increasingly interesting due to the need for precision jet measurements at Higgs factories. This paper presents Geant4 simulations of single-particle responses in sampling and homogeneous calorimeters, and demonstrates the effect of inclusion of Cherenkov light in the reconstruction of energies. The simulations are performed with a single-photon precision.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Enhancing the hunt for new phenomena in dijet final-states using anomaly detection filters at the High-Luminosity Large Hadron Collider
Authors:
Sergei V. Chekanov,
Rui Zhang
Abstract:
In the realm of dijet searches in high-energy physics, a significant challenge has emerged: with experiments producing more and more data, the traditional methods of using analytic functions to describe dijet mass spectra start to fail. To address this, we suggest the application of an anomaly detection approach to eliminate less interesting background events based on event final states. This meth…
▽ More
In the realm of dijet searches in high-energy physics, a significant challenge has emerged: with experiments producing more and more data, the traditional methods of using analytic functions to describe dijet mass spectra start to fail. To address this, we suggest the application of an anomaly detection approach to eliminate less interesting background events based on event final states. This method not only bypasses the limitations of conventional background models but also significantly enhances our ability to detect potential signals of new physics. Through simulations that mimic the conditions of the upcoming High-Luminosity Large Hadron Collider, we demonstrate the strength and efficiency of this approach in dealing with large data volumes. The integration of unsupervised machine learning into our experimental framework paves the way for a promising avenue to unveil hidden physics discoveries within the overwhelming influx of data.
△ Less
Submitted 13 March, 2024; v1 submitted 4 August, 2023;
originally announced August 2023.
-
Report of the Topical Group on Physics Beyond the Standard Model at Energy Frontier for Snowmass 2021
Authors:
Tulika Bose,
Antonio Boveia,
Caterina Doglioni,
Simone Pagan Griso,
James Hirschauer,
Elliot Lipeles,
Zhen Liu,
Nausheen R. Shah,
Lian-Tao Wang,
Kaustubh Agashe,
Juliette Alimena,
Sebastian Baum,
Mohamed Berkat,
Kevin Black,
Gwen Gardner,
Tony Gherghetta,
Josh Greaves,
Maxx Haehn,
Phil C. Harris,
Robert Harris,
Julie Hogan,
Suneth Jayawardana,
Abraham Kahn,
Jan Kalinowski,
Simon Knapen
, et al. (297 additional authors not shown)
Abstract:
This is the Snowmass2021 Energy Frontier (EF) Beyond the Standard Model (BSM) report. It combines the EF topical group reports of EF08 (Model-specific explorations), EF09 (More general explorations), and EF10 (Dark Matter at Colliders). The report includes a general introduction to BSM motivations and the comparative prospects for proposed future experiments for a broad range of potential BSM mode…
▽ More
This is the Snowmass2021 Energy Frontier (EF) Beyond the Standard Model (BSM) report. It combines the EF topical group reports of EF08 (Model-specific explorations), EF09 (More general explorations), and EF10 (Dark Matter at Colliders). The report includes a general introduction to BSM motivations and the comparative prospects for proposed future experiments for a broad range of potential BSM models and signatures, including compositeness, SUSY, leptoquarks, more general new bosons and fermions, long-lived particles, dark matter, charged-lepton flavor violation, and anomaly detection.
△ Less
Submitted 18 October, 2022; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Muon Collider Forum Report
Authors:
K. M. Black,
S. Jindariani,
D. Li,
F. Maltoni,
P. Meade,
D. Stratakis,
D. Acosta,
R. Agarwal,
K. Agashe,
C. Aime,
D. Ally,
A. Apresyan,
A. Apyan,
P. Asadi,
D. Athanasakos,
Y. Bao,
E. Barzi,
N. Bartosik,
L. A. T. Bauerdick,
J. Beacham,
S. Belomestnykh,
J. S. Berg,
J. Berryhill,
A. Bertolin,
P. C. Bhat
, et al. (160 additional authors not shown)
Abstract:
A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently availab…
▽ More
A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report.
△ Less
Submitted 8 August, 2023; v1 submitted 2 September, 2022;
originally announced September 2022.
-
Snowmass 2021 White Paper: Electron Ion Collider for High Energy Physics
Authors:
R. Abdul Khalek,
U. D'Alesio,
M. Arratia,
A. Bacchetta,
M. Battaglieri,
M. Begel,
M. Boglione,
R. Boughezal,
R. Boussarie,
G. Bozzi,
S. V. Chekanov,
F. G. Celiberto,
G. Chirilli,
T. Cridge,
R. Cruz-Torres,
R. Corliss,
C. Cotton,
H. Davoudiasl,
A. Deshpande,
X. Dong,
A. Emmert,
S. Fazio,
S. Forte,
Y. Furletova,
C. Gal
, et al. (83 additional authors not shown)
Abstract:
Electron Ion Collider (EIC) is a particle accelerator facility planned for construction at Brookhaven National Laboratory on Long Island, New York by the United States Department of Energy. EIC will provide capabilities of colliding beams of polarized electrons with polarized beams of proton and light ions. EIC will be one of the largest and most sophisticated new accelerator facilities worldwide,…
▽ More
Electron Ion Collider (EIC) is a particle accelerator facility planned for construction at Brookhaven National Laboratory on Long Island, New York by the United States Department of Energy. EIC will provide capabilities of colliding beams of polarized electrons with polarized beams of proton and light ions. EIC will be one of the largest and most sophisticated new accelerator facilities worldwide, and the only new large-scale accelerator facility planned for construction in the United States in the next few decades. The versatility, resolving power and intensity of EIC will present many new opportunities to address some of the crucial and fundamental open scientific questions in particle physics. This document provides an overview of the science case of EIC from the perspective of the high energy physics community.
△ Less
Submitted 17 October, 2022; v1 submitted 24 March, 2022;
originally announced March 2022.
-
Jets and Jet Substructure at Future Colliders
Authors:
Ben Nachman,
Salvatore Rappoccio,
Nhan Tran,
Johan Bonilla,
Grigorios Chachamis,
Barry M. Dillon,
Sergei V. Chekanov,
Robin Erbacher,
Loukas Gouskos,
Andreas Hinzmann,
Stefan Höche,
B. Todd Huffman,
Ashutosh. V. Kotwal,
Deepak Kar,
Roman Kogler,
Clemens Lange,
Matt LeBlanc,
Roy Lemmon,
Christine McLean,
Mark S. Neubauer,
Tilman Plehn,
Debarati Roy,
Giordan Stark,
Jennifer Roloff,
Marcel Vos
, et al. (2 additional authors not shown)
Abstract:
Even though jet substructure was not an original design consideration for the Large Hadron Collider (LHC) experiments, it has emerged as an essential tool for the current physics program. We examine the role of jet substructure on the motivation for and design of future energy frontier colliders. In particular, we discuss the need for a vibrant theory and experimental research and development prog…
▽ More
Even though jet substructure was not an original design consideration for the Large Hadron Collider (LHC) experiments, it has emerged as an essential tool for the current physics program. We examine the role of jet substructure on the motivation for and design of future energy frontier colliders. In particular, we discuss the need for a vibrant theory and experimental research and development program to extend jet substructure physics into the new regimes probed by future colliders. Jet substructure has organically evolved with a close connection between theorists and experimentalists and has catalyzed exciting innovations in both communities. We expect such developments will play an important role in the future energy frontier physics program.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Precision timing for collider-experiment-based calorimetry
Authors:
S. V. Chekanov,
F. Simon,
V. Boudry,
W. Chung,
P. W. Gorham,
M. Nguyen,
C. G. Tully,
S. C. Eno,
Y. Lai,
A. V. Kotwal,
S. Ko,
I. Laktineh,
S. Lee,
J. S. H. Lee,
M. T. Lucchini,
R. Prechelt,
H. Yoo,
C. -H Yeh,
S. -S. Yu,
G. S. Varner,
R. Zhu
Abstract:
In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the f…
▽ More
In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the full detector volume, and dedicated timing layers integrated in calorimeter systems. A selection of technologies for the different approaches is also discussed.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Some aspects of impact of the Electron Ion Collider on particle physics at the Energy Frontier
Authors:
S. V. Chekanov,
S. Magill
Abstract:
This overview describes several science cases at the Electron-Ion-Collider (EIC) experiment which are traditional to general particle physics. It has an emphasis on connections between future measurements at the EIC and the physics topics explored at high-energy frontier colliders. It covers several selected topics, such as parton density functions, multi-quarks states, correlations of final-state…
▽ More
This overview describes several science cases at the Electron-Ion-Collider (EIC) experiment which are traditional to general particle physics. It has an emphasis on connections between future measurements at the EIC and the physics topics explored at high-energy frontier colliders. It covers several selected topics, such as parton density functions, multi-quarks states, correlations of final-state particles, precision QCD measurements and forward jet physics. We will discuss possible EIC measurements that can improve previous experimental results obtained at high-energy (HEP) experiments.
△ Less
Submitted 24 February, 2022; v1 submitted 23 February, 2022;
originally announced February 2022.
-
A note on blind technique for new physics searches in particle physics
Authors:
S. V. Chekanov
Abstract:
This paper attempts to classify various blinding strategies used in particle physics. It argues that the blinding technique is not used consistently throughout searches for new physics. More importantly, the blinding technique, in its traditional sense, cannot be applicable for many current and future searches when statistical precision of data significantly exceeds the current level of our unders…
▽ More
This paper attempts to classify various blinding strategies used in particle physics. It argues that the blinding technique is not used consistently throughout searches for new physics. More importantly, the blinding technique, in its traditional sense, cannot be applicable for many current and future searches when statistical precision of data significantly exceeds the current level of our understanding of Standard Model (SM) backgrounds.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Event-based anomaly detection for new physics searches at the LHC using machine learning
Authors:
S. V. Chekanov,
W. Hopkins
Abstract:
This paper discusses model-agnostic searches for new physics at the Large Hadron Collider (LHC) using anomaly-detection techniques for the identification of event signatures that deviate from the Standard Model (SM). We investigate anomaly detection in the context of machine-learning approaches using autoencoders, and illustrate expected shapes of invariant masses in the outlier region using Monte…
▽ More
This paper discusses model-agnostic searches for new physics at the Large Hadron Collider (LHC) using anomaly-detection techniques for the identification of event signatures that deviate from the Standard Model (SM). We investigate anomaly detection in the context of machine-learning approaches using autoencoders, and illustrate expected shapes of invariant masses in the outlier region using Monte Carlo simulations. Challenges and conceptual limitations of this approach are discussed.
△ Less
Submitted 16 September, 2022; v1 submitted 23 November, 2021;
originally announced November 2021.
-
Searches for new physics in collision events using a statistical technique for anomaly detection
Authors:
S. V. Chekanov
Abstract:
This paper discusses a statistical anomaly-detection method for model-independent searches for new physics in collision events produced at the Large Hadron Collider (LHC). The method requires calculations of $Z$-scores for a large number of Lorenz-invariant variables to identify events that deviate from those expected for the Standard Model (SM).
This paper discusses a statistical anomaly-detection method for model-independent searches for new physics in collision events produced at the Large Hadron Collider (LHC). The method requires calculations of $Z$-scores for a large number of Lorenz-invariant variables to identify events that deviate from those expected for the Standard Model (SM).
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Model-independent searches for new physics in multi-body invariant masses
Authors:
S. V. Chekanov,
S. Darmora,
W. Islam,
C. E. M. Wagner,
J. Zhang
Abstract:
Model-independent searches for physics beyond the Standard Model typically focus on invariant masses of two objects (jets, leptons or photons). In this study we explore opportunities for similar model-agnostic searches in multi-body invariant masses. In particular, we focus on the situations when new physics can be observed in a model-independent way in three- and four-body invariant masses of jet…
▽ More
Model-independent searches for physics beyond the Standard Model typically focus on invariant masses of two objects (jets, leptons or photons). In this study we explore opportunities for similar model-agnostic searches in multi-body invariant masses. In particular, we focus on the situations when new physics can be observed in a model-independent way in three- and four-body invariant masses of jets and leptons. Such searches may have good prospects in finding new physics in the situations when two-body invariant masses, that have been extensively explored at collider experiments in the past, cannot provide sufficient signatures for experimental observations.
△ Less
Submitted 8 September, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Jas4pp -- a Data-Analysis Framework for Physics and Detector Studies
Authors:
S. V. Chekanov,
G. Gavalian,
N. A. Graf
Abstract:
This paper describes the Jas4pp framework for exploring physics cases and for detector-performance studies of future particle collision experiments. Jas4pp is a multi-platform Java program for numeric calculations, scientific visualization in 2D and 3D, storing data in various file formats and displaying collision events and detector geometries. It also includes complex data-analysis algorithms fo…
▽ More
This paper describes the Jas4pp framework for exploring physics cases and for detector-performance studies of future particle collision experiments. Jas4pp is a multi-platform Java program for numeric calculations, scientific visualization in 2D and 3D, storing data in various file formats and displaying collision events and detector geometries. It also includes complex data-analysis algorithms for function minimisation, regression analysis, event reconstruction (such as jet reconstruction), limit settings and other libraries widely used in particle physics. The framework can be used with several scripting languages, such as Python/Jython, Groovy and JShell. Several benchmark tests discussed in the paper illustrate significant improvements in the performance of the Groovy and JShell scripting languages compared to the standard Python implementation in C. The improvements for numeric computations in Java are attributed to recent enhancements in the Java Virtual Machine.
△ Less
Submitted 4 January, 2021; v1 submitted 10 November, 2020;
originally announced November 2020.
-
Physics potential of timing layers in future collider detectors
Authors:
S. V. Chekanov,
A. V. Kotwal,
C. -H. Yeh,
S. -S. Yu
Abstract:
The physics potential of timing layers with a few tens of pico-second resolution in the calorimeters of future collider detectors is explored. These studies show how such layers can be used for particle identification and illustrate the potential for detecting new event signatures originating from physics beyond the standard model.
The physics potential of timing layers with a few tens of pico-second resolution in the calorimeters of future collider detectors is explored. These studies show how such layers can be used for particle identification and illustrate the potential for detecting new event signatures originating from physics beyond the standard model.
△ Less
Submitted 16 July, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Automated detector simulation and reconstruction parametrization using machine learning
Authors:
D. Benjamin,
S. V. Chekanov,
W. Hopkins,
Y. Li,
J. R. Love
Abstract:
Rapidly applying the effects of detector response to physics objects (e.g. electrons, muons, showers of particles) is essential in high energy physics. Currently available tools for the transformation from truth-level physics objects to reconstructed detector-level physics objects involve manually defining resolution functions. These resolution functions are typically derived in bins of variables…
▽ More
Rapidly applying the effects of detector response to physics objects (e.g. electrons, muons, showers of particles) is essential in high energy physics. Currently available tools for the transformation from truth-level physics objects to reconstructed detector-level physics objects involve manually defining resolution functions. These resolution functions are typically derived in bins of variables that are correlated with the resolution (e.g. pseudorapidity and transverse momentum). This process is time consuming, requires manual updates when detector conditions change, and can miss important correlations. Machine learning offers a way to automate the process of building these truth-to-reconstructed object transformations and can capture complex correlation for any given set of input variables. Such machine learning algorithms, with sufficient optimization, could have a wide range of applications: improving phenomenological studies by using a better detector representation, allowing for more efficient production of Geant4 simulation by only simulating events within an interesting part of phase space, and studies on future experimental sensitivity to new physics.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Studies of granularity of a hadronic calorimeter for tens-of-TeV jets at a 100 TeV $pp$ collider
Authors:
C. -H. Yeh,
S. V. Chekanov,
A. V. Kotwal,
J. Proudfoot,
S. Sen,
N. V. Tran,
S. -S. Yu
Abstract:
Jet substructure variables for hadronic jets with transverse momenta in the range from 2.5 TeV to 20 TeV were studied using several designs for the spatial size of calorimeter cells. The studies used the full Geant4 simulation of calorimeter response combined with realistic reconstruction of calorimeter clusters. In most cases, the results indicate that the performance of jet-substructure reconstr…
▽ More
Jet substructure variables for hadronic jets with transverse momenta in the range from 2.5 TeV to 20 TeV were studied using several designs for the spatial size of calorimeter cells. The studies used the full Geant4 simulation of calorimeter response combined with realistic reconstruction of calorimeter clusters. In most cases, the results indicate that the performance of jet-substructure reconstruction improves with reducing cell size of a hadronic calorimeter from $Δη\times Δφ= 0.087\times0.087$, which are similar to the cell sizes of the calorimeters of LHC experiments, by a factor of four, to $0.022\times0.022$.
△ Less
Submitted 24 April, 2019; v1 submitted 30 January, 2019;
originally announced January 2019.
-
Beyond the Standard Model Physics at the HL-LHC and HE-LHC
Authors:
X. Cid Vidal,
M. D'Onofrio,
P. J. Fox,
R. Torre,
K. A. Ulmer,
A. Aboubrahim,
A. Albert,
J. Alimena,
B. C. Allanach,
C. Alpigiani,
M. Altakach,
S. Amoroso,
J. K. Anders,
J. Y. Araz,
A. Arbey,
P. Azzi,
I. Babounikau,
H. Baer,
M. J. Baker,
D. Barducci,
V. Barger,
O. Baron,
L. Barranco Navarro,
M. Battaglia,
A. Bay
, et al. (272 additional authors not shown)
Abstract:
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu…
▽ More
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.
△ Less
Submitted 13 August, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
ProIO: An Event-Based I/O Stream Format for Protobuf Messages
Authors:
D. Blyth,
J. Alcaraz,
S. Binet,
S. V. Chekanov
Abstract:
ProIO is a new event-oriented streaming data format which utilizes Google's Protocol Buffers (protobuf) to be flexible and highly language-neutral. The ProIO concept is described here along with its software implementations. The performance of the ProIO concept for a dataset with Monte-Carlo event records used in high-energy physics was benchmarked and compared/contrasted with ROOT I/O. Various co…
▽ More
ProIO is a new event-oriented streaming data format which utilizes Google's Protocol Buffers (protobuf) to be flexible and highly language-neutral. The ProIO concept is described here along with its software implementations. The performance of the ProIO concept for a dataset with Monte-Carlo event records used in high-energy physics was benchmarked and compared/contrasted with ROOT I/O. Various combinations of general-purpose compression and variable-length integer encoding available in protobuf were used to investigate the relationship between I/O performance and size-on-disk in a few key scenarios.
△ Less
Submitted 22 March, 2019; v1 submitted 10 December, 2018;
originally announced December 2018.
-
Jet Substructure Variables with the SiFCC Detector at 100 TeV
Authors:
C. -H Yeh,
S. V. Chekanov,
A. V. Kotwal,
J. Proudfoot,
S. Sen,
N. V. Tran,
S. -S Yu
Abstract:
Future experiments beyond the LHC era will measure high-momentum bosons ($W$, $Z$, $H$) and top quarks with strongly collimated decay products that form hadronic jets. This paper describes the studies of the performance of jet substructure variables using the Geant4 simulation of a detector designed for high energy $pp$ collisions at a 100 TeV collider. The two-prong jets from $Z' \rightarrow WW$…
▽ More
Future experiments beyond the LHC era will measure high-momentum bosons ($W$, $Z$, $H$) and top quarks with strongly collimated decay products that form hadronic jets. This paper describes the studies of the performance of jet substructure variables using the Geant4 simulation of a detector designed for high energy $pp$ collisions at a 100 TeV collider. The two-prong jets from $Z' \rightarrow WW$ and three-prong jets from $Z' \rightarrow t\bar{t}$ are compared with the background from light quark jets, assuming $Z'$ masses in the range 5 -- 40 TeV. Our results indicate that the performance of jet-substructure reconstruction improves with reducing transverse cell sizes of a hadronic calorimeter from $Δη\times Δφ= 0.087\times0.087$ to $0.022\times0.022$ in most cases.
△ Less
Submitted 26 November, 2018;
originally announced November 2018.
-
Machine learning using rapidity-mass matrices for event classification problems in HEP
Authors:
S. V. Chekanov
Abstract:
Supervised artificial neural networks with the rapidity-mass matrix (RMM) inputs were studied using several Monte Carlo event samples for various pp collision processes. The study shows the usability of this approach for general event classification problems. The proposed standardization of the ANN feature space can simplify searches for signatures of new physics at the LHC when using machine lear…
▽ More
Supervised artificial neural networks with the rapidity-mass matrix (RMM) inputs were studied using several Monte Carlo event samples for various pp collision processes. The study shows the usability of this approach for general event classification problems. The proposed standardization of the ANN feature space can simplify searches for signatures of new physics at the LHC when using machine learning techniques. In particular, we illustrate how to improve signal-over-background ratios in searches for new physics, how to filter out Standard Model events for model-agnostic searches, and how to separate gluon and quark jets for Standard Model measurements.
△ Less
Submitted 25 January, 2021; v1 submitted 15 October, 2018;
originally announced October 2018.
-
Top-Quark Physics at the CLIC Electron-Positron Linear Collider
Authors:
H. Abramowicz,
N. Alipour Tehrani,
D. Arominski,
Y. Benhammou,
M. Benoit,
J. -J. Blaising,
M. Boronat,
O. Borysov,
R. R. Bosley,
I. Božović Jelisavčić,
I. Boyko,
S. Brass,
E. Brondolin,
P. Bruckman de Renstrom,
M. Buckland,
P. N. Burrows,
M. Chefdeville,
S. Chekanov,
T. Coates,
D. Dannheim,
M. Demarteau,
H. Denizli,
G. Durieux,
G. Eigen,
K. Elsener
, et al. (92 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies: 380 GeV, 1.5 TeV, and 3 TeV. Its aim is to explore the energy frontier, providing sensitivity to physics beyond the Standard Model (BSM) and precision measurements of Standard Model processes with an emphasis on Higgs boso…
▽ More
The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies: 380 GeV, 1.5 TeV, and 3 TeV. Its aim is to explore the energy frontier, providing sensitivity to physics beyond the Standard Model (BSM) and precision measurements of Standard Model processes with an emphasis on Higgs boson and top-quark physics. The opportunities for top-quark physics at CLIC are discussed in this paper. The initial stage of operation focuses on top-quark pair production measurements, as well as the search for rare flavour-changing neutral current (FCNC) top-quark decays. It also includes a top-quark pair production threshold scan around 350 GeV which provides a precise measurement of the top-quark mass in a well-defined theoretical framework. At the higher-energy stages, studies are made of top-quark pairs produced in association with other particles. A study of ttH production including the extraction of the top Yukawa coupling is presented as well as a study of vector boson fusion (VBF) production, which gives direct access to high-energy electroweak interactions. Operation above 1 TeV leads to more highly collimated jet environments where dedicated methods are used to analyse the jet constituents. These techniques enable studies of the top-quark pair production, and hence the sensitivity to BSM physics, to be extended to higher energies. This paper also includes phenomenological interpretations that may be performed using the results from the extensive top-quark physics programme at CLIC.
△ Less
Submitted 18 November, 2019; v1 submitted 6 July, 2018;
originally announced July 2018.
-
Imaging particle collision data for event classification using machine learning
Authors:
S. V. Chekanov
Abstract:
We propose a method to organize experimental data from particle collision experiments in a general format which can enable a simple visualisation and effective classification of collision data using machine learning techniques. The method is based on sparse fixed-size matrices with single- and two-particle variables containing information on identified particles and jets. We illustrate this method…
▽ More
We propose a method to organize experimental data from particle collision experiments in a general format which can enable a simple visualisation and effective classification of collision data using machine learning techniques. The method is based on sparse fixed-size matrices with single- and two-particle variables containing information on identified particles and jets. We illustrate this method using an example of searches for new physics at the LHC experiments.
△ Less
Submitted 15 March, 2019; v1 submitted 29 May, 2018;
originally announced May 2018.
-
Quantum Sensing for High Energy Physics
Authors:
Zeeshan Ahmed,
Yuri Alexeev,
Giorgio Apollinari,
Asimina Arvanitaki,
David Awschalom,
Karl K. Berggren,
Karl Van Bibber,
Przemyslaw Bienias,
Geoffrey Bodwin,
Malcolm Boshier,
Daniel Bowring,
Davide Braga,
Karen Byrum,
Gustavo Cancelo,
Gianpaolo Carosi,
Tom Cecil,
Clarence Chang,
Mattia Checchin,
Sergei Chekanov,
Aaron Chou,
Aashish Clerk,
Ian Cloet,
Michael Crisler,
Marcel Demarteau,
Ranjan Dharmapalan
, et al. (91 additional authors not shown)
Abstract:
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
△ Less
Submitted 29 March, 2018;
originally announced March 2018.
-
Precision searches in dijets at the HL-LHC and HE-LHC
Authors:
S. V. Chekanov,
J. T. Childers,
D. Frizzell,
J. Proudfoot,
R. Wang
Abstract:
This paper explores the physics reach of the High-Luminosity Large Hadron Collider (HL-LHC) for searches of new particles decaying to two jets. We discuss inclusive searches in dijets and b-jets, as well as searches in semi-inclusive events by requiring an additional lepton that increases sensitivity to different aspects of the underlying processes. We discuss the expected exclusion limits for gen…
▽ More
This paper explores the physics reach of the High-Luminosity Large Hadron Collider (HL-LHC) for searches of new particles decaying to two jets. We discuss inclusive searches in dijets and b-jets, as well as searches in semi-inclusive events by requiring an additional lepton that increases sensitivity to different aspects of the underlying processes. We discuss the expected exclusion limits for generic models predicting new massive particles that result in resonant structures in the dijet mass. Prospects of the Higher-Energy LHC (HE-LHC) collider are also discussed. The study is based on the Pythia8 Monte Carlo generator using representative event statistics for the HL-LHC and HE-LHC running conditions. The event samples were created using supercomputers at NERSC.
△ Less
Submitted 30 March, 2018; v1 submitted 25 October, 2017;
originally announced October 2017.
-
Effect of PYTHIA8 tunes on event shapes and top-quark reconstruction in $e^+e^-$ annihilation at CLIC
Authors:
S. Chekanov,
M. Demarteau,
A. Fischer,
J. Zhang
Abstract:
This paper describes the effect of PYTHIA8 tunes on event simulation of $e^+e^-$ collisions with center-of-mass (CM) energies of 380 GeV and 3 TeV at the proposed CLIC collider. Event shapes, such as thrust, thrust major, thrust minor, oblateness, as well as particle multiplicities have been analyzed and relative differences with respect to the default PYTHIA8 tune were determined. The effect of t…
▽ More
This paper describes the effect of PYTHIA8 tunes on event simulation of $e^+e^-$ collisions with center-of-mass (CM) energies of 380 GeV and 3 TeV at the proposed CLIC collider. Event shapes, such as thrust, thrust major, thrust minor, oblateness, as well as particle multiplicities have been analyzed and relative differences with respect to the default PYTHIA8 tune were determined. The effect of tunes on top-mass reconstruction in the resolved and boosted regimes was analyzed. No statistically significant variation for reconstructed top masses using invariant masses of three jets was found for events with a CM energy of 380 GeV. For the fully boosted top reconstruction at a CM energy of 3 TeV, a significant shift in reconstructed top mass of about 700 MeV for the "Montull" tune was observed. This shift correlates with an increase in particle multiplicity compared to all other PYTHIA8 tunes.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Initial performance studies of a general-purpose detector for multi-TeV physics at a 100 TeV pp collider
Authors:
S. V. Chekanov,
M. Beydler,
A. V. Kotwal,
L. Gray,
S. Sen,
N. V. Tran,
S. -S. Yu,
J. Zuzelski
Abstract:
This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations p…
▽ More
This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations presented in this paper. The initial performance of a detector designed for physics studies at the FCC-hh or SppC experiments is described with an emphasis on measurements of single particles up to 33 TeV in transverse momentum. The reconstruction of hadronic jets has also been studied in the transverse momentum range from 50 GeV to 26 TeV. The granularity requirements for calorimetry are investigated using the two-particle spatial resolution achieved for hadron showers.
△ Less
Submitted 9 June, 2017; v1 submitted 21 December, 2016;
originally announced December 2016.
-
Study Of Boosted W-Jets And Higgs-Jets With the SiFCC Detector
Authors:
Shin-Shan Yu,
Sergei Chekanov,
Lindsey Gray,
Ashutosh Kotwal,
Sourav Sen,
Nhan Viet Tran
Abstract:
We study the detector performance in the reconstruction of hadronically-decaying W bosons and Higgs bosons at very high energy proton colliders using a full GEANT4 simulation of the SiFCC detector. The W and Higgs bosons carry transverse momentum in the multi-TeV range, which results in collimated decay products that are reconstructed as a single jet. We present a measurement of the energy respons…
▽ More
We study the detector performance in the reconstruction of hadronically-decaying W bosons and Higgs bosons at very high energy proton colliders using a full GEANT4 simulation of the SiFCC detector. The W and Higgs bosons carry transverse momentum in the multi-TeV range, which results in collimated decay products that are reconstructed as a single jet. We present a measurement of the energy response and resolution of boosted W-jets and Higgs-jets and show the separation of two sub-jets within the boosted boson jet.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
Machine learning techniques in searches for $t\bar{t}h$ in the $h \rightarrow b\bar{b}$ decay channel
Authors:
Roberto Santos,
Marcus Nguyen,
Jordan Webster,
Soo Ryu,
Jahred Adelman,
Sergei Chekanov,
Jie Zhou
Abstract:
Study of the production of pairs of top quarks in association with a Higgs boson is one of the primary goals of the Large Hadron Collider over the next decade, as measurements of this process may help us to understand whether the uniquely large mass of the top quark plays a special role in electroweak symmetry breaking. Higgs bosons decay predominantly to \bbbar, yielding signatures for the signal…
▽ More
Study of the production of pairs of top quarks in association with a Higgs boson is one of the primary goals of the Large Hadron Collider over the next decade, as measurements of this process may help us to understand whether the uniquely large mass of the top quark plays a special role in electroweak symmetry breaking. Higgs bosons decay predominantly to \bbbar, yielding signatures for the signal that are similar to $t\bar{t}$ + jets with heavy flavor. Though particularly challenging to study due to the similar kinematics between signal and background events, such final states ($t\bar{t} b \bar{b}$) are an important channel for studying the top quark Yukawa coupling. This paper presents a systematic study of machine learning (ML) methods for detecting $t\bar{t}h$ in the $h \rightarrow b\bar{b}$ decay channel. Among the eight ML methods tested, we show that two models, extreme gradient boosted trees and neural network models, outperform alternative methods. We further study the effectiveness of ML algorithms by investigating the impact of feature set and data size, as well as the structure of the models. While extended feature set and larger training sets expectedly lead to improvement of performance, shallow models deliver comparable or better performance than their deeper counterparts. Our study suggests that ensembles of trees and neurons, not necessarily deep, work effectively for the problem of $t\bar{t}h$ detection.
△ Less
Submitted 30 November, 2016; v1 submitted 10 October, 2016;
originally announced October 2016.
-
Public repository with Monte Carlo simulations for high-energy particle collision experiments
Authors:
S. V. Chekanov
Abstract:
Planning high-energy collision experiments for the next few decades requires extensive Monte Carlo simulations in order to accomplish physics goals of these experiments. Such simulations are essential for understanding fundamental physics processes, as well as for setting up the detector parameters that help establish R&D projects required over the next few decades. This paper describes a public r…
▽ More
Planning high-energy collision experiments for the next few decades requires extensive Monte Carlo simulations in order to accomplish physics goals of these experiments. Such simulations are essential for understanding fundamental physics processes, as well as for setting up the detector parameters that help establish R&D projects required over the next few decades. This paper describes a public repository with Monte Carlo event samples before and after detector-response simulation. The goal of this repository is to facilitate the accomplishment of many goals in planning a next generation of particle experiments.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
Physics at a 100 TeV pp collider: beyond the Standard Model phenomena
Authors:
T. Golling,
M. Hance,
P. Harris,
M. L. Mangano,
M. McCullough,
F. Moortgat,
P. Schwaller,
R. Torre,
P. Agrawal,
D. S. M. Alves,
S. Antusch,
A. Arbey,
B. Auerbach,
G. Bambhaniya,
M. Battaglia,
M. Bauer,
P. S. Bhupal Dev,
A. Boveia,
J. Bramante,
O. Buchmueller,
M. Buschmann,
J. Chakrabortty,
M. Chala,
S. Chekanov,
C. -Y. Chen
, et al. (89 additional authors not shown)
Abstract:
This report summarises the physics opportunities in the search and study of physics beyond the Standard Model at a 100 TeV pp collider.
This report summarises the physics opportunities in the search and study of physics beyond the Standard Model at a 100 TeV pp collider.
△ Less
Submitted 2 June, 2016;
originally announced June 2016.
-
Conceptual Design Studies for a CEPC Detector
Authors:
S. V. Chekanov,
M. Demarteau
Abstract:
The physics potential of the Circular Electron Positron Collider (CEPC) can be significantly strengthened by two detectors with complementary designs. A promising detector approach based on the Silicon Detector (SiD) designed for the International Linear Collider (ILC) is presented. Several simplifications of this detector for the lower energies expected at the CEPC are proposed. A number of cost…
▽ More
The physics potential of the Circular Electron Positron Collider (CEPC) can be significantly strengthened by two detectors with complementary designs. A promising detector approach based on the Silicon Detector (SiD) designed for the International Linear Collider (ILC) is presented. Several simplifications of this detector for the lower energies expected at the CEPC are proposed. A number of cost optimizations of this detector are illustrated using full detector simulations. We show that the proposed changes will enable to reach the physics goals at the CEPC.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Energy range of hadronic calorimeter towers and cells for high-pT jets at a 100 TeV collider
Authors:
S. V. Chekanov,
J. Dull
Abstract:
This paper discusses a study of tower and cell energy ranges of a hadronic calorimeter for a 100 TeV pp collider. The dynamic energy ranges were estimated using Standard Model jets with transverse momenta above 20 TeV. The simulations were performed using the PYTHIA Monte Carlo model after a fast detector simulation tuned to the ATLAS hadronic calorimeter. We estimate the maximum energy range of t…
▽ More
This paper discusses a study of tower and cell energy ranges of a hadronic calorimeter for a 100 TeV pp collider. The dynamic energy ranges were estimated using Standard Model jets with transverse momenta above 20 TeV. The simulations were performed using the PYTHIA Monte Carlo model after a fast detector simulation tuned to the ATLAS hadronic calorimeter. We estimate the maximum energy range of towers and cells as a function of lateral cell sizes for several extreme cases of jet transverse energy.
△ Less
Submitted 28 December, 2015; v1 submitted 4 November, 2015;
originally announced November 2015.
-
Cross-platform validation and analysis environment for particle physics
Authors:
S. V. Chekanov,
I. Pogrebnyak,
D. Wilbern
Abstract:
A multi-platform validation and analysis framework for public Monte Carlo simulation for high-energy particle collisions is discussed. The front-end of this framework uses the Python programming language, while the back-end is written in Java, which provides a multi-platform environment that can be run from a web browser and can easily be deployed at the grid sites. The analysis package includes a…
▽ More
A multi-platform validation and analysis framework for public Monte Carlo simulation for high-energy particle collisions is discussed. The front-end of this framework uses the Python programming language, while the back-end is written in Java, which provides a multi-platform environment that can be run from a web browser and can easily be deployed at the grid sites. The analysis package includes all major software tools used in high-energy physics, such as Lorentz vectors, jet algorithms, histogram packages, graphic canvases, and tools for providing data access. This multi-platform software suite, designed to minimize OS-specific maintenance and deployment time, is used for online validation of Monte Carlo event samples through a web interface.
△ Less
Submitted 27 July, 2017; v1 submitted 20 October, 2015;
originally announced October 2015.
-
Double Higgs Production in the 4$τ$ channel from resonances in longitudinal vector boson scattering at a 100 TeV collider
Authors:
A. V. Kotwal,
S. Chekanov,
M. Low
Abstract:
We discuss the sensitivity of a 100 TeV $pp$ collider to heavy resonances produced in longitudinal vector boson scattering and decaying to a pair of Higgs bosons. A Monte Carlo study has been performed using the $H \to ττ$ decay channel for both Higgs bosons, comparing the kinematics of such a signal to the irreducible Standard Model backgrounds. The results are presented in the context of a pheno…
▽ More
We discuss the sensitivity of a 100 TeV $pp$ collider to heavy resonances produced in longitudinal vector boson scattering and decaying to a pair of Higgs bosons. A Monte Carlo study has been performed using the $H \to ττ$ decay channel for both Higgs bosons, comparing the kinematics of such a signal to the irreducible Standard Model backgrounds. The results are presented in the context of a phenomenological model of a resonance ($η$) coupling to goldstone modes, $V_L V_L \to η\to HH$, as can arise in composite Higgs models. With a fractional width of 70% (20%), the $5 σ$ discovery reach is 4.2 (2.9) TeV in resonance mass for 10 ab$^{-1}$ of integrated luminosity. We also discuss the dependence of the mass reach on the collider energy and integrated luminosity.
△ Less
Submitted 1 August, 2015; v1 submitted 29 April, 2015;
originally announced April 2015.
-
Sensitivity to new high-mass states decaying to ttbar at a 100 TeV collider
Authors:
B. Auerbach,
S. Chekanov,
J. Love,
J. Proudfoot,
A. V. Kotwal
Abstract:
We discuss the sensitivity of a 100 TeV pp collider to heavy particles decaying to top-antitop final states. This center-of-mass energy, together with an integrated luminosity of 10 ab-1, can produce heavy particles in the mass range of several tens of teraelectronvolts (TeV). A Monte Carlo study has been performed using boosted-top techniques to reduce QCD background for the reconstruction of hea…
▽ More
We discuss the sensitivity of a 100 TeV pp collider to heavy particles decaying to top-antitop final states. This center-of-mass energy, together with an integrated luminosity of 10 ab-1, can produce heavy particles in the mass range of several tens of teraelectronvolts (TeV). A Monte Carlo study has been performed using boosted-top techniques to reduce QCD background for the reconstruction of heavy particles with masses in the range of 8-20 TeV, and various widths. In particular, we have studied two models that predict heavy states, a model with an extra gauge boson (Zprime) and with a Kaluza-Klein (KK) excitation of the gluon (gKK). We estimate the sensitive values of $σ\times$Br of about 2 (4) fb for Zprime (gKK), with a corresponding mass reach of 13 (20) TeV.
△ Less
Submitted 7 January, 2015; v1 submitted 18 December, 2014;
originally announced December 2014.
-
HepSim: a repository with predictions for high-energy physics experiments
Authors:
S. V. Chekanov
Abstract:
A file repository for calculations of cross sections and kinematic distributions using Monte Carlo generators for high-energy collisions is discussed. The repository is used to facilitate effective preservation and archiving of data from theoretical calculations, as well as for comparisons with experimental data. The HepSim data library is publicly accessible and includes a number of Monte Carlo e…
▽ More
A file repository for calculations of cross sections and kinematic distributions using Monte Carlo generators for high-energy collisions is discussed. The repository is used to facilitate effective preservation and archiving of data from theoretical calculations, as well as for comparisons with experimental data. The HepSim data library is publicly accessible and includes a number of Monte Carlo event samples with Standard Model predictions for current and future experiments. The HepSim project includes a software package to automate the process of downloading and viewing online Monte Carlo event samples. A data streaming over a network for end-user analysis is discussed.
△ Less
Submitted 6 February, 2015; v1 submitted 7 March, 2014;
originally announced March 2014.
-
Snowmass 2013 Top quark working group report
Authors:
K. Agashe,
R. Erbacher,
C. E. Gerber,
K. Melnikov,
R. Schwienhorst,
A. Mitov,
M. Vos,
S. Wimpenny,
J. Adelman,
M. Baumgart,
A. Garcia-Bellido,
A. Loginov,
A. Jung,
M. Schulze,
J. Shelton,
N. Craig,
M. Velasco,
T. Golling,
J. Hubisz,
A. Ivanov,
M. Perelstein,
S. Chekanov,
J. Dolen,
J. Pilot,
R. Pöschl
, et al. (145 additional authors not shown)
Abstract:
This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass).
This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass).
△ Less
Submitted 8 November, 2013;
originally announced November 2013.
-
ProMC: Input-output data format for HEP applications using varint encoding
Authors:
S. V. Chekanov,
E. May,
K. Strand,
P. Van Gemmeren
Abstract:
A new data format for Monte Carlo (MC) events, or any structural data, including experimental data, is discussed. The format is designed to store data in a compact binary form using variable-size integer encoding as implemented in the Google's Protocol Buffers package. This approach is implemented in the ProMC library which produces smaller file sizes for MC records compared to the existing input-…
▽ More
A new data format for Monte Carlo (MC) events, or any structural data, including experimental data, is discussed. The format is designed to store data in a compact binary form using variable-size integer encoding as implemented in the Google's Protocol Buffers package. This approach is implemented in the ProMC library which produces smaller file sizes for MC records compared to the existing input-output libraries used in high-energy physics (HEP). Other important features of the proposed format are a separation of abstract data layouts from concrete programming implementations, self-description and random access. Data stored in ProMC files can be written, read and manipulated in a number of programming languages, such C++, JAVA, FORTRAN and PYTHON.
△ Less
Submitted 3 April, 2014; v1 submitted 5 November, 2013;
originally announced November 2013.
-
Snowmass Energy Frontier Simulations
Authors:
Jacob Anderson,
Aram Avetisyan,
Raymond Brock,
Sergei Chekanov,
Timothy Cohen,
Nitish Dhingra,
James Dolen,
James Hirschauer,
Kiel Howe,
Ashutosh Kotwal,
Tom LeCompte,
Sudhir Malik,
Patricia Mcbride,
Kalanand Mishra,
Meenakshi Narain,
Jim Olsen,
Sanjay Padhi,
Michael E. Peskin,
John Stupak III,
Jay G. Wacker
Abstract:
This document describes the simulation framework used in the Snowmass Energy Frontier studies for future Hadron Colliders. An overview of event generation with {\sc Madgraph}5 along with parton shower and hadronization with {\sc Pythia}6 is followed by a detailed description of pile-up and detector simulation with {\sc Delphes}3. Details of event generation are included in a companion paper cited…
▽ More
This document describes the simulation framework used in the Snowmass Energy Frontier studies for future Hadron Colliders. An overview of event generation with {\sc Madgraph}5 along with parton shower and hadronization with {\sc Pythia}6 is followed by a detailed description of pile-up and detector simulation with {\sc Delphes}3. Details of event generation are included in a companion paper cited within this paper. The input parametrization is chosen to reflect the best object performance expected from the future ATLAS and CMS experiments; this is referred to as the "Combined Snowmass Detector". We perform simulations of $pp$ interactions at center-of-mass energies $\sqrt{s}=$ 14, 33, and 100 TeV with 0, 50, and 140 additional $pp$ pile-up interactions. The object performance with multi-TeV $pp$ collisions are studied for the first time using large pile-up interactions.
△ Less
Submitted 1 September, 2013;
originally announced September 2013.
-
Reconstructing top quarks at the upgraded LHC and at future accelerators
Authors:
R. Calkins,
S. Chekanov,
J. Conway,
J. Dolen,
R. Erbacher,
J. Pilot,
R. Poschl,
S. Rappoccio,
Z. Sullivan,
B. Tweedie
Abstract:
This report describes the studies performed for the Snowmass "Top algorithms and detectors" High Energy Frontier Study Group.
This report describes the studies performed for the Snowmass "Top algorithms and detectors" High Energy Frontier Study Group.
△ Less
Submitted 3 October, 2013; v1 submitted 25 July, 2013;
originally announced July 2013.
-
Next generation input-output data format for HEP using Google's protocol buffers
Authors:
S. V. Chekanov
Abstract:
We propose a data format for Monte Carlo (MC) events, or any structural data, including experimental data, in a compact binary form using variable-size integer encoding as implemented in the Google's Protocol Buffers package. This approach is implemented in the so-called ProMC library which produces smaller file sizes for MC records compared to the existing input-output libraries used in high-ener…
▽ More
We propose a data format for Monte Carlo (MC) events, or any structural data, including experimental data, in a compact binary form using variable-size integer encoding as implemented in the Google's Protocol Buffers package. This approach is implemented in the so-called ProMC library which produces smaller file sizes for MC records compared to the existing input-output libraries used in high-energy physics (HEP). Other important features are a separation of abstract data layouts from concrete programming implementations, self-description and random access. Data stored in ProMC files can be written, read and manipulated in a number of programming languages, such C++, Java and Python.
△ Less
Submitted 27 June, 2013;
originally announced June 2013.
