Enhancement of the sound absorption of closed-cell mineral foams by perforations: Manufacturing process and model-supported adaptation
Authors:
Bart Van Damme,
Théo Cavalieri,
Cong-Truc Nguyen,
Camille Perrot
Abstract:
Thin low-frequency acoustic absorbers that are economical to produce in large quantities are scarce, and their efficiency is often limited to a narrow frequency range. In this paper, we present opportunities to use highly porous mineral foams, in particular optimally designed gypsum foams, to achieve high absorption levels for layers of less than 1/10 of a wavelength thick. To reach this goal, we…
▽ More
Thin low-frequency acoustic absorbers that are economical to produce in large quantities are scarce, and their efficiency is often limited to a narrow frequency range. In this paper, we present opportunities to use highly porous mineral foams, in particular optimally designed gypsum foams, to achieve high absorption levels for layers of less than 1/10 of a wavelength thick. To reach this goal, we perforate a fraction of the initially closed pores using thin needles. Finite element simulations of the fluid flow in a representative volume element show how the combination of foam properties (cell size and wall thickness) and perforation pattern (hole diameter and perforation distance) can be chosen such that sub-wavelength absorption is obtained. In particular two transport parameters used in the approximate but robust Johnson-Champoux-Allard model for porous media have to be optimized: the flow resistivity and high-frequency tortuosity. The fluid flow modeling results are successfully compared with sound absorption measurements, showing indeed that the proposed material, once appropriately perforated, yields a remarkable low-frequency sound absorption peak. On a more fundamental level, this paper shows how the multiporosity, the presence of microcracks, and the material's surface roughness can be exploited to enhance its acoustic absorption at very low frequencies.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
General method to retrieve all effective acoustic properties of fully-anisotropic fluid materials in three dimensional space
Authors:
Arthur Terroir,
Logan Schwan,
Théo Cavalieri,
Vicente Romero-García,
Gwénaël Gabard,
Jean-Philippe Groby
Abstract:
Anisotropic fluid materials are of growing interest with the development of metamaterials and transformation acoustics. In the general three-dimensional case, such materials are characterized by a bulk modulus and a full symmetric matrix of density. Here, a method is presented to retrieve the bulk modulus and all six components of the density matrix from a selected set of six incident plane waves…
▽ More
Anisotropic fluid materials are of growing interest with the development of metamaterials and transformation acoustics. In the general three-dimensional case, such materials are characterized by a bulk modulus and a full symmetric matrix of density. Here, a method is presented to retrieve the bulk modulus and all six components of the density matrix from a selected set of six incident plane waves impinging on a layer of the material. From the six components of the density tensor, the three principal directions and the three principal densities of the material are recovered. The approach relies on the analytical expression of the reflection and transmission coefficients derived from a state vector analysis. It results in simple, closed-form, and easily-implementable inverse relations for the material parameters. As an illustration, the case of sound propagation through an orthorhombic lattice of overlapping air-filled ellipsoids is considered, the effective complex and frequency-dependent bulk modulus and density matrix of which are derived from homogenization cell problems and account for viscothermal losses. The retrieval method is then applied to the homogenized layer and results bear testament to its robustness to extract accurately all seven material parameters. This makes possible the characterization and design of anisotropic fluid materials in three dimensions.
△ Less
Submitted 6 October, 2018;
originally announced October 2018.
