-
Phase-based analysis and control of supersonic turbulent cavity flows
Authors:
Vedasri Godavarthi,
Yoji Kawamura,
Lawrence S. Ukeiley,
Louis N. Cattafesta III,
Kunihiko Taira
Abstract:
We present a phase-based framework for reducing the pressure fluctuations within a spanwise-periodic supersonic turbulent cavity flow with an incoming free-stream Mach number of 1.4 and a depth-based Reynolds number of 10,000. Open cavity flows exhibit large fluctuations due to the feedback between the shear layer instabilities and the acoustic field. The dominant flow physics includes the formati…
▽ More
We present a phase-based framework for reducing the pressure fluctuations within a spanwise-periodic supersonic turbulent cavity flow with an incoming free-stream Mach number of 1.4 and a depth-based Reynolds number of 10,000. Open cavity flows exhibit large fluctuations due to the feedback between the shear layer instabilities and the acoustic field. The dominant flow physics includes the formation, convection, and impingement of large-scale spanwise-oriented vortical structures. We formulate a flow control strategy to effectively modify the vortex convection frequency, thereby disrupting the feedback loop and suppressing pressure fluctuations within the cavity. We implement a phase-reduction approach to identify the flow response about the time-varying convective process by defining a phase variable using dynamic mode decomposition. Three-dimensional impulse perturbations are introduced from the cavity leading edge to characterize phase response in terms of advancement or delay of convection. We perform open-loop flow control through unsteady blowing using actuation frequencies slightly different from the vortex convection frequency to disrupt the feedback loop. After designing a phase-sensitivity-based actuation waveform optimized for quick flow modification, we investigate the speed of fluctuation reduction and compare it to a sinusoidal waveform. At a spanwise actuation wavenumber of $β=2π$, both perform similarly, achieving a 46% reduction of pressure fluctuations within five convective times. At $β=π$, the phase-sensitivity-based actuation performs better by achieving a 40% reduction compared to the 30% with a sinusoidal waveform within six convective times. This study shows the potential of phase-based analysis for timing-based flow control of unsteady turbulent flows.
△ Less
Submitted 8 February, 2025;
originally announced February 2025.
-
An Electroacoustic Lumped Element Model of a Dielectric Elastomer Membrane
Authors:
C. Solano,
Y. Zhang,
L. N. Cattafesta III
Abstract:
Dielectric elastomers are widely studied for their use in robotic and medical devices due to their shape changing properties. Recently, they have also been incorporated into acoustic devices, motivating the development of an electroacoustic model for dielectric elastomers. This paper provides a lumped element model based on a prestretched membrane approximation of a dielectric elastomer actuated b…
▽ More
Dielectric elastomers are widely studied for their use in robotic and medical devices due to their shape changing properties. Recently, they have also been incorporated into acoustic devices, motivating the development of an electroacoustic model for dielectric elastomers. This paper provides a lumped element model based on a prestretched membrane approximation of a dielectric elastomer actuated by a dc voltage. The electroacoustic model is validated via experiments using a laser Doppler vibrometer and acoustic impedance tube measurements. Good agreement between the experiments and model are demonstrated. The resulting validated model is expected to be useful in design optimization for acoustic applications.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Spectral Analysis Modal Methods (SAMMs) using Non-Time-Resolved PIV
Authors:
Yang Zhang,
Louis N. Cattafesta III,
Lawrence Ukeiley
Abstract:
We present spectral analysis modal methods (SAMMs) to perform POD in the frequency domain using non-time-resolved Particle Image Velocity (PIV) data combined with unsteady surface pressure measurements. In particular, time-resolved unsteady surface pressure measurements are synchronized with non-time-resolved planar PIV measurements acquired at 15 Hz in a Mach 0.6 cavity flow. Leveraging the spect…
▽ More
We present spectral analysis modal methods (SAMMs) to perform POD in the frequency domain using non-time-resolved Particle Image Velocity (PIV) data combined with unsteady surface pressure measurements. In particular, time-resolved unsteady surface pressure measurements are synchronized with non-time-resolved planar PIV measurements acquired at 15 Hz in a Mach 0.6 cavity flow. Leveraging the spectral linear stochastic estimation (LSE) method of Tinney et al. (2006), we first estimate the cross correlations between the velocity field and the unsteady pressure sensors via sequential time shifts, followed by a Fast Fourier transform to obtain the pressure-velocity cross spectral density matrix. This leads to a linear multiple-input / multiple-output (MIMO) model that determines the optimal transfer functions between the input cavity wall pressure and the output velocity field. Two variants of SAMMs are developed and applied. The first, termed "SAMM-SPOD", combines the MIMO model with the SPOD algorithm of Towne et al. (2018). The second, called "SAMM-RR'', adds independent sources and uses a sorted eigendecomposition of the input pressure cross-spectral matrix to enable an efficient reduced-rank eigendecomposition of the velocity cross-spectral matrix. In both cases, the resulting rank-1 POD eigenvalues associated with the Rossiter frequencies exhibit very good agreement with those obtained using independent time-resolved PIV measurements. The results demonstrate that SAMMs provide a methodology to perform space-time POD without requiring a high-speed PIV system, while avoiding potential pitfalls associated with traditional time-domain LSE.
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Stereoscopic molecular tagging for superconducting accelerator-cavity quench spot detection
Authors:
Shiran Bao,
Toshiaki Kanai,
Yang Zhang,
Louis N. Cattafesta III,
Wei Guo
Abstract:
Superconducting radio-frequency (SRF) cavities cooled by superfluid helium-4 (He II) are building blocks of many modern particle accelerators due to their high quality factor. However, Joule heating from sub-millimeter surface defects on cavities can lead to cavity quenching, which limits the maximum acceleration gradient of the accelerators. Developing a non-contacting detection technology to acc…
▽ More
Superconducting radio-frequency (SRF) cavities cooled by superfluid helium-4 (He II) are building blocks of many modern particle accelerators due to their high quality factor. However, Joule heating from sub-millimeter surface defects on cavities can lead to cavity quenching, which limits the maximum acceleration gradient of the accelerators. Developing a non-contacting detection technology to accurately locate these surface defects is the key to improve the performance of SRF cavities and hence the accelerators. In a recent proof-of-concept experiment (Phys. Rev. Applied, 11, 044003 (2019)), we demonstrated that a molecular tagging velocimetry (MTV) technique based on the tracking of a He$_2^*$ molecular tracer line created nearby a surface hot spot in He II can be utilized to locate the hot spot. In order to make this technique practically useful, here we describe our further development of a stereoscopic MTV setup for tracking the tracer line's motion in three-dimensional (3D) space. We simulate a quench spot by applying a transient voltage pulse to a small heater mounted on a substrate plate. Images of the drifted tracer line, taken with two cameras from orthogonal directions, are used to reconstruct the line profile in 3D space. A new algorithm for analyzing the 3D line profile is developed, which incorporates the finite size effect of the heater. We show that the center location of the heater can be reproduced on the substrate surface with an uncertainty of only a few hundred microns, thereby proving the practicability of this method.
△ Less
Submitted 9 May, 2020;
originally announced May 2020.
-
Unsteady control of supersonic turbulent cavity flow based on resolvent analysis
Authors:
Qiong Liu,
Yiyang Sun,
Chi-An Yeh,
Lawrence S. Ukeiley,
Louis N. Cattafesta III,
Kunihiko Taira
Abstract:
We use resolvent analysis to determine an unsteady active control setup to attenuate pressure fluctuations in turbulent supersonic flow over a rectangular cavity with a length-to-depth ratio of 6 at a Mach number of 1.4 and a Reynolds number based on cavity depth of 10,000. Large-eddy simulations (LES) and dynamic modal decomposition (DMD) of the supersonic cavity flow reveal the dominance of two-…
▽ More
We use resolvent analysis to determine an unsteady active control setup to attenuate pressure fluctuations in turbulent supersonic flow over a rectangular cavity with a length-to-depth ratio of 6 at a Mach number of 1.4 and a Reynolds number based on cavity depth of 10,000. Large-eddy simulations (LES) and dynamic modal decomposition (DMD) of the supersonic cavity flow reveal the dominance of two-dimensional Rossiter modes II and IV. These predominantly two-dimensional vortical structures generate high-amplitude unsteadiness over the cavity through trailing-edge impingement and create oblique shock waves by obstructing the freestream. To disrupt the undesired formation of vortical structures, we introduce three-dimensional unsteady forcing along the cavity leading edge to generate streamwise vortical structures. Resolvent analysis with respect to the time-averaged base flow is leveraged to determine the optimal combination of forcing frequency and spanwise wavenumber. Instead of selecting the most amplified resolvent forcing modes, we seek the combination of control parameters that yields sustained amplification of the primary resolvent-based kinetic energy distribution over the entire length of the cavity. The sustained amplification is critical to ensure that the selected forcing input remains effective to prevent the formation of the large spanwise vortices. This resolvent-analysis-based flow control guideline is validated with a number of companion LES of the controlled cavity flows. The optimal control setup is verified to be the most effective in reducing the pressure root-mean-square level up to 52% along the aft and bottom cavity walls compared to the baseline cavity flow. The present flow control guideline derived from resolvent analysis should be applicable to flows that require the actuation input to remain effective over an extended region of interest.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
A cryogenic-helium pipe flow facility with unique double-line molecular tagging velocimetry capability
Authors:
Hamid Sanavandi,
Shiran Bao,
Yang Zhang,
Ruben Keijzer,
Wei Guo,
Lou N. Cattafesta III
Abstract:
Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an extraordinary heat transfer capability and has been utilized in various scientific and engineering applications. In order to unlock the full potential of helium in turbulen…
▽ More
Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an extraordinary heat transfer capability and has been utilized in various scientific and engineering applications. In order to unlock the full potential of helium in turbulence research and to improve our understanding of the heat transfer mechanism in He II, a flow facility that allows quantitative study of helium heat-and-mass transfer processes is needed. Here we report our work in assembling and testing a unique helium pipe flow facility that incorporates a novel double-line molecular tracking velocimetry (DL-MTV) system. This flow facility allows us to generate turbulent pipe flows with $Re$ above $10^7$, and it can also be adapted to produce heat-induced counterflow in He II. The DL-MTV system, which is based on the generation and tracking of two parallel thin He$^*_2$ molecular tracer lines with an adjustable separation distance, allows us to measure not only the velocity profile but also both the transverse and longitudinal spatial velocity structure functions. We have also installed a deferential pressure sensor to the flow pipe for pressure drop measurement. The testing results of the flow facility and the measurement devices are presented. We discuss how this facility will allow us to solve some outstanding problems in the helium heat-and-mass transfer topic area.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
Resolvent analysis of compressible laminar and turbulent cavity flows
Authors:
Yiyang Sun,
Qiong Liu,
Louis N. Cattafesta,
Lawrence S. Ukeiley,
Kunihiko Taira
Abstract:
The present work demonstrates the use of resolvent analysis to obtain physical insights for open-cavity flows. Resolvent analysis identifies the flow response to harmonic forcing, given a steady base state, in terms of the response and forcing modes and the amplification gain. The response and forcing modes reveal the spatial structures associated with this amplification process. In this study, we…
▽ More
The present work demonstrates the use of resolvent analysis to obtain physical insights for open-cavity flows. Resolvent analysis identifies the flow response to harmonic forcing, given a steady base state, in terms of the response and forcing modes and the amplification gain. The response and forcing modes reveal the spatial structures associated with this amplification process. In this study, we perform resolvent analysis on both laminar and turbulent flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ at a free stream Mach number of $M_\infty=0.6$ in a spanwise periodic setting. Based on the dominant instability of the base state, a discount parameter is introduced to resolvent analysis to examine the harmonic characteristics over a finite-time window. We first uncover the underlying flow physics and interpret findings from laminar flow at $Re_D = 502$. These findings from laminar flow are extended to a more practical cavity flow example at a much higher Reynolds number of $Re_D = 10^4$. The features of response and forcing modes from the laminar and turbulent cavity flows are similar to the spatial structures from the laminar analysis. We further find that the large amplification of energy in flow response is associated with high frequency for turbulent flow, while the flow is more responsive to low frequency excitation in the laminar case. These findings from resolvent analysis provide valuable insights for flow control studies with regard to parameter selection and placement of actuators and sensors.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Unscented Kalman filter (UKF) based nonlinear parameter estimation for a turbulent boundary layer: a data assimilation framework
Authors:
Zhao Pan,
Yang Zhang,
Jonas P. R. Gustavsson,
Jean-Pierre Hickey,
Louis N. Cattafesta III
Abstract:
A turbulent boundary layer is an essential flow case of fundamental and applied fluid mechanics. However, accurate measurements of turbulent boundary layer parameters (e.g., friction velocity $u_τ$ and wall shear $τ_w$), are challenging, especially for high speed flows (Smits et al., 2011). Many direct and/or indirect diagnostic techniques have been developed to measure wall shear stress (Vinuesa…
▽ More
A turbulent boundary layer is an essential flow case of fundamental and applied fluid mechanics. However, accurate measurements of turbulent boundary layer parameters (e.g., friction velocity $u_τ$ and wall shear $τ_w$), are challenging, especially for high speed flows (Smits et al., 2011). Many direct and/or indirect diagnostic techniques have been developed to measure wall shear stress (Vinuesa et al., 2017). However, based on different principles, these techniques usually give different results with different uncertainties. The current study introduces a nonlinear data assimilation framework based on the Unscented Kalman Filter that can fuse information from i) noisy and gappy measurements from Stereo Particle Image Velocimetry, a Preston tube, and a MEMS shear stress sensor, as well as ii) the uncertainties of the measurements to estimate the parameters of a turbulent boundary layer. A direct numerical simulation of a fully developed turbulent boundary layer flow at Mach 0.3 is used first to validate the data assimilation algorithm. The algorithm is then applied to experimental data of a flow at Mach 0.3, which are obtained in a blowdown wind tunnel facility. The UKF-based data assimilation algorithm is robust to uncertain and gappy experimental data and is able to provide accurate estimates of turbulent boundary layer parameters.
△ Less
Submitted 9 April, 2020; v1 submitted 20 August, 2019;
originally announced August 2019.
-
Active attenuation of a trailing vortex inspired by a parabolized stability analysis
Authors:
Adam M. Edstrand,
Yiyang Sun,
Peter J. Schmid,
Kunihiko Taira,
Louis N. Cattafesta III
Abstract:
Designing effective control for complex three-dimensional flow fields proves to be non-trivial. Oftentimes, intuitive control strategies lead to suboptimal control. To navigate the control space, we utilize a linear parabolized stability analysis to guide the design of a control scheme for a trailing vortex flow field aft of a NACA0012 half-wing at an angle of attack $α= 5^\circ$ and a chord-based…
▽ More
Designing effective control for complex three-dimensional flow fields proves to be non-trivial. Oftentimes, intuitive control strategies lead to suboptimal control. To navigate the control space, we utilize a linear parabolized stability analysis to guide the design of a control scheme for a trailing vortex flow field aft of a NACA0012 half-wing at an angle of attack $α= 5^\circ$ and a chord-based Reynolds number $Re = 1000$. The stability results show that the unstable mode with the smallest growth rate (fifth wake mode) provides a pathway to excite a vortex instability, whereas the principal unstable mode remains in the wake of the wing. Inspired by this finding, we perform direct numerical simulations that excite each mode with body forces matching the shape function from the stability analysis. Relative to the baseline uncontrolled case, the principal wake mode reduces the vortex length, while the fifth wake mode further shortens the tip vortex. Analogously, the streamwise circulation of the trailing vortex is found to be significantly reduced. From these results, we conclude that a rudimentary linear stability analysis can provide key insight into the underlying physics and help engineers design more effective control.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Spanwise effects on instabilities of compressible flow over a long rectangular cavity
Authors:
Yiyang Sun,
Kunihiko Taira,
Louis N. Cattafesta,
Lawrence S. Ukeiley
Abstract:
The stability properties of two- (2D) and three-dimensional (3D) compressible flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ is analyzed at a free stream Mach number of $M_\infty=0.6$ and depth-based Reynolds number of $Re_D=502$. In this study, we closely examine the influence of three-dimensionality on the wake-mode that has been reported to exhibit high-amplitude fluctuat…
▽ More
The stability properties of two- (2D) and three-dimensional (3D) compressible flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ is analyzed at a free stream Mach number of $M_\infty=0.6$ and depth-based Reynolds number of $Re_D=502$. In this study, we closely examine the influence of three-dimensionality on the wake-mode that has been reported to exhibit high-amplitude fluctuations from the formation and ejection of large-scale spanwise vortices. Direct numerical simulation (DNS) and bi-global stability analysis are utilized to study the instability characteristics of the wake-mode. Using the bi-global stability analysis with the time-average flow as the base state, we capture the global stability properties of the wake-mode at a spanwise wavenumber of $β=0$. To uncover spanwise effects on the 2D wake-mode, 3D DNS are performed with cavity width-to-depth ratio of $W/D=1$ and $2$. We find that the 2D wake-mode is not present in the 3D cavity flow for a wider spanwise setting with $W/D=2$, in which spanwise structures are observed near the rear region of the cavity. These 3D instabilities are further investigated via bi-global stability analysis for spanwise wavelengths of $λ/D=0.5-2.0$ to reveal the eigenspectra of the 3D eigenmodes. Based on the findings of 2D and 3D global stability analysis, we conclude that the absence of the wake-mode in 3D rectangular cavity flows is due to the release of kinetic energy from the spanwise vortices to the streamwise vortical structures that develops from the spanwise instabilities.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Effects of sidewalls and leading-edge blowing on flows over long rectangular cavities
Authors:
Yiyang Sun,
Qiong Liu,
Louis N. Cattafesta,
Lawrence S. Ukeiley,
Kunihiko Taira
Abstract:
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For the spanwise-periodic cavity flow, large pressure fluctuations are present in the shear layer and on the cavity aft wall due to spanwise vortex roll-ups and flow…
▽ More
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For the spanwise-periodic cavity flow, large pressure fluctuations are present in the shear layer and on the cavity aft wall due to spanwise vortex roll-ups and flow impingement. For the finite-span cavity with sidewalls, pressure fluctuations are reduced due to interference to the vortex roll-ups from the sidewalls. Flow oscillations are also reduced by increasing the Mach number from 0.6 to 1.4. Furthermore, secondary flow inside the cavity enhances kinetic energy transport in the spanwise direction. Moreover, 3D slotted jets are placed along the cavity leading edge with the objective of reducing flow oscillations. Steady blowing into the boundary layer is considered with momentum coefficient $C_μ=0.0584$ and $0.0194$ for $M_\infty=0.6$ and $1.4$ cases, respectively. The three-dimensionality introduced to the flow by the jets inhibits large coherent roll-ups of the spanwise vortices in the shear layer, yielding $9-40\%$ reductions in rms pressure and rms velocity for both spanwise-periodic and finite-span cavities.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Evaluating the accuracy of the dynamic mode decomposition
Authors:
Hao Zhang,
Scott T. M. Dawson,
Clarence W. Rowley,
Eric A. Deem,
Louis N. Cattafesta
Abstract:
Dynamic mode decomposition (DMD) gives a practical means of extracting dynamic information from data, in the form of spatial modes and their associated frequencies and growth/decay rates. DMD can be considered as a numerical approximation to the Koopman operator, an infinite-dimensional linear operator defined for (nonlinear) dynamical systems. This work proposes a new criterion to estimate the ac…
▽ More
Dynamic mode decomposition (DMD) gives a practical means of extracting dynamic information from data, in the form of spatial modes and their associated frequencies and growth/decay rates. DMD can be considered as a numerical approximation to the Koopman operator, an infinite-dimensional linear operator defined for (nonlinear) dynamical systems. This work proposes a new criterion to estimate the accuracy of DMD on a mode-by-mode basis, by estimating how closely each individual DMD eigenfunction approximates the corresponding Koopman eigenfunction. This approach does not require any prior knowledge of the system dynamics or the true Koopman spectral decomposition. The method may be applied to extensions of DMD (i.e., extended/kernel DMD), which are applicable to a wider range of problems. The accuracy criterion is first validated against the true error with a synthetic system for which the true Koopman spectral decomposition is known. We next demonstrate how this proposed accuracy criterion can be used to assess the performance of various choices of kernel when using the kernel method for extended DMD. Finally, we show that our proposed method successfully identifies modes of high accuracy when applying DMD to data from experiments in fluids, in particular particle image velocimetry of a cylinder wake and a canonical separated boundary layer.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
-
Online dynamic mode decomposition for time-varying systems
Authors:
Hao Zhang,
Clarence W. Rowley,
Eric A. Deem,
Louis N. Cattafesta
Abstract:
Dynamic mode decomposition (DMD) is a popular technique for modal decomposition, flow analysis, and reduced-order modeling. In situations where a system is time varying, one would like to update the system's description online as time evolves. This work provides an efficient method for computing DMD in real time, updating the approximation of a system's dynamics as new data becomes available. The…
▽ More
Dynamic mode decomposition (DMD) is a popular technique for modal decomposition, flow analysis, and reduced-order modeling. In situations where a system is time varying, one would like to update the system's description online as time evolves. This work provides an efficient method for computing DMD in real time, updating the approximation of a system's dynamics as new data becomes available. The algorithm does not require storage of past data, and computes the exact DMD matrix using rank-1 updates. A weighting factor that places less weight on older data can be incorporated in a straightforward manner, making the method particularly well suited to time-varying systems. A variant of the method may also be applied to online computation of "windowed DMD", in which only the most recent data are used. The efficiency of the method is compared against several existing DMD algorithms: for problems in which the state dimension is less than about~200, the proposed algorithm is the most efficient for real-time computation, and it can be orders of magnitude more efficient than the standard DMD algorithm. The method is demonstrated on several examples, including a time-varying linear system and a more complex example using data from a wind tunnel experiment. In particular, we show that the method is effective at capturing the dynamics of surface pressure measurements in the flow over a flat plate with an unsteady separation bubble.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Biglobal instabilities of compressible open-cavity flows
Authors:
Y. Sun,
K. Taira,
L. N. Cattafesta III,
L. S. Ukeiley
Abstract:
The stability characteristics of compressible spanwise-periodic open-cavity flows are investigated with direct numerical simulation and biglobal stability analysis for rectangular cavities with aspect ratios of $L/D=2$ and 6. This study examines the behavior of instabilities with respect to stable/unstable steady states in the laminar regimes for subsonic and transonic conditions where compressibi…
▽ More
The stability characteristics of compressible spanwise-periodic open-cavity flows are investigated with direct numerical simulation and biglobal stability analysis for rectangular cavities with aspect ratios of $L/D=2$ and 6. This study examines the behavior of instabilities with respect to stable/unstable steady states in the laminar regimes for subsonic and transonic conditions where compressibility plays an important role. It is observed that an increase in Mach number destabilizes the flow in the subsonic regime and stabilizes the flow in the transonic regime. Biglobal stability analysis is conducted to extract 2D and 3D eigenmodes for prescribed spanwise wavelengths about the 2D steady state. The properties of 2D eigenmodes agree well with those observed in the 2D nonlinear simulations. In the analysis of 3D eigenmodes, it is found that an increase of Mach number stabilizes dominant 3D eigenmodes. For a short cavity with $L/D=2$, the 3D eigenmodes primarily stem from centrifugal instabilities. For a long cavity with $L/D=6$, other types of eigenmodes appear whose structures extend from the aft-region to the mid-region of the cavity. A selected number of 3D DNS are performed at $M_\infty=0.6$. For $L/D=2$, the properties of 3D structures present in the 3D nonlinear flow correspond closely to those obtained from linear stability analysis. However, for $L/D=6$, the 3D eigenmodes cannot be clearly observed in the 3D DNS, due to the strong nonlinearity that develops over the length of the cavity. In addition, it is noted that three-dimensionality in the flow helps alleviate violent oscillations for the long cavity. The analysis performed in this paper can provide valuable insights for designing effective flow control strategies to suppress undesirable aerodynamic and pressure fluctuations in compressible open-cavity flows.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Cluster-based control of nonlinear dynamics
Authors:
Eurika Kaiser,
Bernd R. Noack,
Andreas Spohn,
Louis N. Cattafesta,
Marek Morzynski
Abstract:
The ability to manipulate and control fluid flows is of great importance in many scientific and engineering applications. Here, a cluster-based control framework is proposed to determine optimal control laws with respect to a cost function for unsteady flows. The proposed methodology frames high-dimensional, nonlinear dynamics into low-dimensional, probabilistic, linear dynamics which considerably…
▽ More
The ability to manipulate and control fluid flows is of great importance in many scientific and engineering applications. Here, a cluster-based control framework is proposed to determine optimal control laws with respect to a cost function for unsteady flows. The proposed methodology frames high-dimensional, nonlinear dynamics into low-dimensional, probabilistic, linear dynamics which considerably simplifies the optimal control problem while preserving nonlinear actuation mechanisms. The data-driven approach builds upon a state space discretization using a clustering algorithm which groups kinematically similar flow states into a low number of clusters. The temporal evolution of the probability distribution on this set of clusters is then described by a Markov model. The Markov model can be used as predictor for the ergodic probability distribution for a particular control law. This probability distribution approximates the long-term behavior of the original system on which basis the optimal control law is determined. The approach is applied to a separating flow dominated by the Kelvin-Helmholtz shedding.
△ Less
Submitted 17 February, 2016;
originally announced February 2016.
-
De-Biasing the Dynamic Mode Decomposition for Applied Koopman Spectral Analysis
Authors:
Maziar S. Hemati,
Clarence W. Rowley,
Eric A. Deem,
Louis N. Cattafesta
Abstract:
The Dynamic Mode Decomposition (DMD)---a popular method for performing data-driven Koopman spectral analysis---has gained increased adoption as a technique for extracting dynamically meaningful spatio-temporal descriptions of fluid flows from snapshot measurements. Often times, DMD descriptions can be used for predictive purposes as well, which enables informed decision-making based on DMD model-f…
▽ More
The Dynamic Mode Decomposition (DMD)---a popular method for performing data-driven Koopman spectral analysis---has gained increased adoption as a technique for extracting dynamically meaningful spatio-temporal descriptions of fluid flows from snapshot measurements. Often times, DMD descriptions can be used for predictive purposes as well, which enables informed decision-making based on DMD model-forecasts. Despite its widespread use and utility, DMD regularly fails to yield accurate dynamical descriptions when the measured snapshot data are imprecise due to, e.g., sensor noise. Here, we express DMD as a two-stage algorithm in order to isolate a source of systematic error. We show that DMD's first stage, a subspace projection step, systematically introduces bias errors by processing snapshots asymmetrically. To remove this systematic error, we propose utilizing an augmented snapshot matrix in a subspace projection step, as in problems of total least-squares, in order to account for the error present in all snapshots. The resulting unbiased and noise-aware total DMD (TDMD) formulation reduces to standard DMD in the absence of snapshot errors, while the two-stage perspective generalizes the de-biasing framework to other related methods as well. TDMD's performance is demonstrated in numerical and experimental fluids examples.
△ Less
Submitted 26 October, 2015; v1 submitted 12 February, 2015;
originally announced February 2015.
