Showing 1–21 of 21 results for author: Casida, M E

Diagrammatic Multiplet-Sum Method (MSM) Density-Functional Theory (DFT): II. Completion of the Two-Orbital Two-Electron Model (TOTEM) with an Application to the Avoided Crossing in Lithium Hydride (LiH)

Authors: Mark E. Casida, Abraham Ponra, Carolyne Bakasa, Anne Justine Etindele

Abstract: The Ziegler-Rauk-Baerends multiplet sum method (MSM) assumes that density-functional theory (DFT) provides a good description of states dominated by a single determinant. It then uses symmetry to add static correlation to DFT. In our previous article (Article I) [J. Chem. Phys. 159, 244306 (2023)], we introduced diagrammatic MSM-DFT as a tool to aid in extending MSM-DFT to include the nondynamic c… ▽ More The Ziegler-Rauk-Baerends multiplet sum method (MSM) assumes that density-functional theory (DFT) provides a good description of states dominated by a single determinant. It then uses symmetry to add static correlation to DFT. In our previous article (Article I) [J. Chem. Phys. 159, 244306 (2023)], we introduced diagrammatic MSM-DFT as a tool to aid in extending MSM-DFT to include the nondynamic correlation needed for making and breaking bonds even in the absence of symmetry. An attractive feature of this approach is that no functional-dependent parameters need to be introduced, though choices are needed in making correspondances between wave function theory (WFT) and MSM-DFT diagrams. The preliminary examples in Article I used the two-orbital two-electron model (TOTEM) less completely than could have been the case. Diagrammatic MSM-DFT is extended here to treat the full TOTEM and it is shown that the unsymmetric lithium hydride (LiH) molecule dissociates into neutral atoms when diagrammatic MSM-DFT techniques are used to introduce a proper description of the avoided crossing between ionic bonding and covalent bonding states.The method is tested for Hartree-Fock and for three functionals (LDA, PW91, and B3LYP). All the functionals yield similar results as should be expected for a properly-formulated parameter-free theory. Agreement with available estimates show that the magnitude of the coupling element introduced here is excellent. However more work will be needed to obtain quantitative agreement between our diagrammatic MSM-DFT ground-state potential energy curve and that found from high-quality ab initio calculations △ Less

Submitted 8 January, 2025; originally announced January 2025.

Test of the Orbital-Based LI3 Index as a Predictor of the Height of the 3MLCT to 3MC Transition-State Barrier for [Ru(N N)3]2+ Polypyridine Complexes in CH3CN

Authors: Ala Aldin M. H. M. Darghouth, Denis Magero, Mark E. Casida

Abstract: Ruthenium(II) polypyridine compounds often have a relatively long lived triplet metalligand charge transfer (3MLCT) state, making these complexes useful as chromophores for photoactivated electron transfer in photomolecular devices (PMDs). As different PMDs typically require different ligands and as the luminescence lifetime of the 3MLCT is sensitive to the structure of the ligand, it is important… ▽ More Ruthenium(II) polypyridine compounds often have a relatively long lived triplet metalligand charge transfer (3MLCT) state, making these complexes useful as chromophores for photoactivated electron transfer in photomolecular devices (PMDs). As different PMDs typically require different ligands and as the luminescence lifetime of the 3MLCT is sensitive to the structure of the ligand, it is important to understand this state and what types of photoprocesses can lead to its quenching. Recent work has increasingly emphasized that there are likely multiple competing pathways involved which should be explored in order to fully comprehend the 3MLCT state. However the lowest barrier that needs to be crossed to pass over to the nonluminescent triplet metal-centered (3MC) state has been repeatedly found to be a trans dissociation of the complex, at least in the simpler cases studied. This is the fourth in a series of articles investigating the possibility of an orbital based luminescence index (LI3, because it was the most successful of three) for predicting luminescence lifetimes. In an earlier study of bidentate (N N) ligands, we showed that the gas-phase 3MLCT to 3MC mechanism proceeded via an initial charge transfer to a single N N ligand which moves symmetrically away from the central ruthenium atom, followed by a bifurcation pathway to one of two 3MC enantiomers. The actual transition state barrier was quite small and independent, to within the limits of our calculations, to the choice of ligand studied. Here we investigate the same reaction in acetonitrile, CH3CN, solution and find that the mechanism differs from that in the gas phase in that the reaction passes directly via a trans mechanism. This has implications for the interpretation of LI3 via the Bell-Evans Polanyi principle. △ Less

Submitted 7 November, 2024; originally announced November 2024.

Comments: 14 Figure 6 tables

Journal ref: The Journal of Physical Chemistry A 2025 129 (8), 1960-1971

Theoretical Study of Reactivity Indices and Rough Potential Energy Curves for the Dissociation of 59 Fullerendiols in Gas-Phase and in Aqueous Solution with an Implicit Solvent Model

Authors: Anne Justine Etindele, Abraham Ponra, Mark E. Casida, G. Andrés Cisneros, Jorge Nochebuena

Abstract: Buckminsterfullerene, C$_{60}$, has not only a beautiful truncated icosahedral (soccerball) shape, but simple Hückel calculations predict a three-fold degenerate lowest unoccupied molecular orbital (LUMO) which can accomodate up to six electrons making it a good electron acceptor. Experiments have confirmed that C60 is a radical sponge and it is now sold for use in topical cosmetics. Further medic… ▽ More Buckminsterfullerene, C$_{60}$, has not only a beautiful truncated icosahedral (soccerball) shape, but simple Hückel calculations predict a three-fold degenerate lowest unoccupied molecular orbital (LUMO) which can accomodate up to six electrons making it a good electron acceptor. Experiments have confirmed that C60 is a radical sponge and it is now sold for use in topical cosmetics. Further medical uses require functionalization of C60 to make it soluble and one of the simplest functionalization is to make C60(OH)n fullerenols. A previous article [Adv. Quant. Chem. 8, 351 (2023)] studied reactivity indices for the successive addition of the $^\bullet$OH radical to ($^\bullet$)C$_{60}$(OH)$_n$ in gas phase. [($^\bullet$)C$_{60}$(OH)$_n$ is only a radical when n is an odd number.] This present article extends this previous work by examining various aspects of how the reaction, changes in aqueous solution. One obvious difference between C$_{60}$ and their various isomers of C$_{60}$(OH)$_2$ is the presence of a dipole. As fullerendiols are nearly spherical, their change in dipole moment in going from gas to aqueous phase may be estimated using back-of-the-envellope calculations with the Onsager model. The result is remarkably similar to what is obtained using density-functional theory (DFT) and the more sophisticated solvation model based upon the quantum mechanical density (SMD). Calculation of fullerendiol C-O bond energies and reactivity indices using with the SMD approach confirm that the general conclusions from the earlier work regarding gas-phase reactivity still hold in the aqueous phase. △ Less

Submitted 1 October, 2024; originally announced October 2024.

Report number: 129, 9, 2133--2143

Journal ref: The Journal of Physical Chemistry A, 2025

Test of the Orbital-Based LI3 Index as a Predictor of the Height of the $^3$MLCT $\rightarrow$ $^3$MC Transition-State Barrier for Gas-Phase [Ru(N$^\wedge$N)$_3$]$^{2+}$ Polypyridine Complexes

Authors: Denis Magero, Ala Aldin M. H. M. Darghouth, Mark E. Casida

Abstract: Luminescence lifetimes of Ruthenium (II) polypyridine compounds is thought to be controlled by the barrier to conversion of triplet metal-ligand charge transfer ($^{3}$MLCT) state to a non-luminescent triplet metal-centered ($^{3}$MC) state. This work builds on earlier work [J. Photochem. Photobiol. A 276, 8 (2014)] and [J. Photochem. Photobiol. A 348, 305 (2017)] that derived several orbital-base… ▽ More Luminescence lifetimes of Ruthenium (II) polypyridine compounds is thought to be controlled by the barrier to conversion of triplet metal-ligand charge transfer ($^{3}$MLCT) state to a non-luminescent triplet metal-centered ($^{3}$MC) state. This work builds on earlier work [J. Photochem. Photobiol. A 276, 8 (2014)] and [J. Photochem. Photobiol. A 348, 305 (2017)] that derived several orbital-based luminescence indices of which the third (LI3) was based upon frontier-molecular-orbital-like ideas and correlated linearly with values of $E_{ave}$. $E_{ave}$ is a large underestimate of the true $^3$MLCT$\rightarrow$ $^3$MC TS barrier height in the case of the tris bipyridine ruthenium(II) cation {[Ru(bpy)$_3]^{2+}$}, but accurate TS barrier heights are difficult to obtain experimentally, it was judged useful to verify the ideas used to derive the LI3 index by calculating the energetics of the gas-phase $^{3}$MLCT $\rightarrow$ $^{3}$MC reaction for four complexes $\{$[Ru(N$^\wedge$N)$_3$]$^{2+}$ with N$^\wedge$N = bpy ({6}), 4,4'-dm-bpy ({70}), 4,4'-dph-bpy ({73}), and 4,4'-DTB-bpy ({74}) $\}$ using the same density functional and basis sets used in calculating LI3. We examine the trans dissociation mechanism in detail at the B3LYP/6-31G+LANLDZ(Ru) level and uncover a two-part mechanism. In the first part, the electron is transferred to a single ligand rather than symmetrically to all three ligands. It is the two Ru-N bonds to this ligand which are equally elongated in the transition state. The intrinsic reaction coordinate then continues down a ridge in hyperspace and bifurcates into one of two symmetry-equivalent $^3$MC structures with elongated trans bonds. Interestingly, no significant difference is found for the TS barriers for the four complexes treated here. Instead, LI3 is linearly correlated with the energy difference $Δ$ E = E($^{3}$MLCT) - E($^{3}$MC). △ Less

Submitted 3 November, 2023; originally announced November 2023.

Diagrammatic Multiplet-Sum Method (MSM) Density-Functional Theory (DFT): Investigation of the Transferability of Integrals in "Simple" DFT-Based Approaches to Multi-Determinantal Problems

Authors: Abraham Ponra, Carolyne Bakasa, Anne Justine Etindele, Mark E. Casida

Abstract: Static correlation is a difficult problem for density-functional theory (DFT) as it arises in cases of degenerate or quasi-degenerate states where a multideterminantal wave function provides the simplest reasonable first approximation to the true interacting wave function. This is also where Kohn-Sham DFT may also fail to be noninteracting v-representible (NVR). In contrast, Kohn-Sham DFT typicall… ▽ More Static correlation is a difficult problem for density-functional theory (DFT) as it arises in cases of degenerate or quasi-degenerate states where a multideterminantal wave function provides the simplest reasonable first approximation to the true interacting wave function. This is also where Kohn-Sham DFT may also fail to be noninteracting v-representible (NVR). In contrast, Kohn-Sham DFT typically works well for describing the missing dynamic correlation when a single-determinantal reference wave function provides a good first approximation to the true interacting wave function. Multiplet sum method (MSM) DFT [Theor. Chim. Acta 4, 877 (1977)] provides one of the earliest and simplest ways to include static correlation in DFT. MSM-DFT assumes that DFT provides a good description of single-determant energies and uses symmetry and simple ansatzes to include the effects of static correlation. This is equivalent to determining the off-diagonal matrix elements in a small configuration interaction (CI) eigenvalue problem. We have developed a diagrammatic approach to MS-DFT facilitates comparison with wave function CI and so allows educated guesses of off-diagonal CI matrix elements even in the absence of symmetry. In every case, an additional exchange-only ansatz (EXAN) allows the MSM-DFT formulae to be transformed into wave function formulae. This EXAN also works for transforming time-dependent DFT into time-dependent Hartree-Fock. Although not enough to uniquely guess DFT formulae from wave function formulae, the diagrammatic approach and the EXAN provide important constraints on any guesses that might be used. Some alternative guesses are tried out for problems concerning the ground and excited states of H2 , LiH, and O2 in order to assess how much difference might be involved for different DFT guesses for off-diagonal matrix elements. △ Less

Submitted 2 September, 2023; originally announced September 2023.

Binding Energies for Successive Addition Reaction of .OH with C60 : A Laboratory for Testing Frontier Molecular Orbital Theory

Authors: Abraham Ponra, Anne Justine Etindele, Ousmanou Motapon, Mark Eurl Casida

Abstract: We study the successive addition reaction of .OH on fullerene C60. We confirm that the lowest energy isomers of C60(OH)n form a belt of hydroxyl groups around the equator of C60, but ask the question of what governs the relative stability of subtitutions at different carbons? Factors concerning regioselectivity are analyzed in terms of conceptual density-functional theory, frontier molecular orbit… ▽ More We study the successive addition reaction of .OH on fullerene C60. We confirm that the lowest energy isomers of C60(OH)n form a belt of hydroxyl groups around the equator of C60, but ask the question of what governs the relative stability of subtitutions at different carbons? Factors concerning regioselectivity are analyzed in terms of conceptual density-functional theory, frontier molecular orbital theory, charge and spin densities, based upon Mulliken population analysis. We confirm that .OH is an electrophilic radical whose successive reaction with C60 is under both charge and orbital control. This is seen to be especially the case for addition to odd .C60(OH)2m+1 fullerenols, but is also seen from a Fukui function and dual descriptor analysis for even C60(OH)2m fullerenols. Of particular interest is the ability of the condensed radical Fukui function f0 to provide information about the reactivity of even C60(OH)2m fullerenols with .OH also when the spin density is zero, and the observation that the interpretation of the sign of the dual descriptor changes depending upon whether a spin-restricted calculation is being performed for even C60(OH)2m fullerenols or a spin-unrestricted calculation is being performed for odd .C60(OH)2m+1 fullerenols. △ Less

Submitted 20 December, 2022; originally announced December 2022.

Comments: 28 pages, 13 figures

A New Freely-Downloadable Hands-on Density-Functional Theory Workbook Using a Freely-Downloadable Version of deMon2k

Authors: Nabila B. Oozeer, Abraham Ponra, Anne Justine Etindele, Mark E. Casida

Abstract: One of us (MEC) developed a hands-on workbook for density-functional theory (DFT) during the summer of 2020. The idea was to have something that could be used to provide practical teaching for students at the Masters or advanced undergraduate level that would be free, could be used on a student's own personal computer, and would complement formal course work. The workbook is also very much intende… ▽ More One of us (MEC) developed a hands-on workbook for density-functional theory (DFT) during the summer of 2020. The idea was to have something that could be used to provide practical teaching for students at the Masters or advanced undergraduate level that would be free, could be used on a student's own personal computer, and would complement formal course work. The workbook is also very much intended to encourage students to explore program options, discover theory limitations, puzzle out what to do when the program does not work as expected, and to help students transition to thinking and using quantum chemistry programs as a researcher might do. After describing the structure of the workbook, we describe how the workbook has been used thus far as a teaching tool and as a useful step towards research-level problems. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 15 pages, 3 Figures, Conference: International Congress on Molecular Electronic Structure (MES 2022), Monastir, Tunisia, 2-6 September 2022. Pure Appl. Chem.

Practical Treatment of Singlet Oxygen with Density-Functional Theory and the Multiplet-Sum Method

Authors: Abraham Ponra, Anne Justine Etindele, Ousmanou Motapon, Mark E. Casida

Abstract: Singlet oxygen (O2) comes in two flavors -- namely the dominant lower-energy a 1 Delta g state and the higher-energy shorter-lived b 1 Sigma + g state -- and plays a key role in many photochemical and photobiological reactions. For this reason, and because of the large size of the systems treated, many papers have appeared with density-functional theory (DFT) treatments of the reactions of 1 O 2 w… ▽ More Singlet oxygen (O2) comes in two flavors -- namely the dominant lower-energy a 1 Delta g state and the higher-energy shorter-lived b 1 Sigma + g state -- and plays a key role in many photochemical and photobiological reactions. For this reason, and because of the large size of the systems treated, many papers have appeared with density-functional theory (DFT) treatments of the reactions of 1 O 2 with different chemical species. The present work serves as a reminder that the common assumption that it is enough to fix the spin multipicity as unity is not enough to insure a correct treatment of singlet oxygen. We review the correct group theoretical treatment of the three lowest energy electronic states of O 2 which, in the case of 1 O 2 is often so badly explained in the relevant photochemical literature that the explanation borders on being incorrect and prevents, rather than encourages, a correct treatment of this interesting and important photochemical species. We then show how many electronic structure programs, such as a freely downloadable and personal-computer compatible Linux version of deMon2k, may be used, together with the multiplet sum method (MSM), to obtain a more accurate estimation of the potential energy curves (PECs) of the two 1 O 2 states. Various strengths and weaknesses of different DFAs emerge through our application of the MSM method. In particular, the quality of the a 1 Delta g excitation energy reflects how well functionals are able to describe the spin-flip energy in DFT while the quality of the b 1 Sigma + g excitation energy reflects how well functionals are able to describe the spin-pairing energy in DFT. Finally we note that improvements in DFT-based excited-state methods will be needed to describe the full PECs of 1 O 2 including both the equilibrium bond lengths and dissociation behavior. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Journal ref: Theo. Chem. Acc. 140, 154 (2021)

Computational Studies of Ruthenium and Iridium Complexes for Energy Sciences and Progress on Greener Alternatives

Authors: Denis Magero, Tarek Mestiri, Kamel Alimi, Mark Earl Casida

Abstract: The energy sciences attempt to meet the increasing world-wide need for energy, as well as sustainability goals, by cleaner sources of energy, by new alternative sources of energy, and by more efficient uses of available energy. These goals are entirely consistent with the principles of green chemistry. This chapter concerns devices for creating electricity from light and for creating light from el… ▽ More The energy sciences attempt to meet the increasing world-wide need for energy, as well as sustainability goals, by cleaner sources of energy, by new alternative sources of energy, and by more efficient uses of available energy. These goals are entirely consistent with the principles of green chemistry. This chapter concerns devices for creating electricity from light and for creating light from electricity. The major focus is on the photoproperties of ruthenium and iridium complexes, which have been proven to be a rich source of inspiration for conceiving photoactivated devices, including organic photovoltaic (OPV) cells and organic light emitting diodes (OLEDs). The chapter reviews important already-in-use and potential applications of ruthenium and iridium complex-based photodevices, including the underlying mechanism behind their functioning and its investigation through computational chemistry approaches. It highlights the role of the information obtained from computational studies for the design of more efficient photodevices. The final part complements the discourse with a review of the progress on greener alternatives for OPVs and OLEDs. △ Less

Submitted 8 March, 2020; originally announced April 2020.

Comments: This manuscript has been prepared for submission as a book chapter for Liliana MAMMINO (editor) Green Chemistry and Computational Chemistry, a volume in the Advances in Green and Sustainable Chemistry Series, Due for publication July 2021, Series list: https://www.elsevier.com/catalog/all/all/all/advances-in-green-chemistry

Effect of Varying the TD-lc-DFTB Range-Separation Parameter on Charge and Energy Transfer in a Model Pentacene/Buckminsterfullerene Heterojunction

Authors: Ala Aldin M. H. M. Darghouth, Mark E. Casida, Xi Zhu, Bhaarathi Natarajan, Haibin Su, Alexander Humeniuk, Evgenii Titov, Xincheng Miao, Roland Mitric

Abstract: Density-functional tight binding (DFTB) has become a popular form of approximate density-functional theory (DFT) based upon a minimal valence basis set and neglect of all but two center integrals. We report the results of our tests of a recent long-range correction (lc) for time-dependent (TD) lc-DFTB by carrying out TD-lc-DFTB fewest switches surface hopping (FSSH) calculations of energy and char… ▽ More Density-functional tight binding (DFTB) has become a popular form of approximate density-functional theory (DFT) based upon a minimal valence basis set and neglect of all but two center integrals. We report the results of our tests of a recent long-range correction (lc) for time-dependent (TD) lc-DFTB by carrying out TD-lc-DFTB fewest switches surface hopping (FSSH) calculations of energy and charge transfer times using the relatively new DFTBaby program. An advantage of this method is the ability to run enough trajectories to get meaningful ensemble averages. Our interest in the present work is less in determining exact energy and charge transfer rates than in understanding how the results of these calculations vary with the value of the range-separation parameter (Rlc = 1/μ) for a model organic solar cell heterojunction consisting of a van der Waals complex P/F made up of single pentacene (P) molecule together with a single buckminsterfullerene (F) molecule. The default value of Rlc = 3.03 a0 is found to be much too small as neither energy nor charge transfer is observed until Rlc ~ 10 a0. Tests at a single geometry show that best agreement with high-quality ab-initio spectra is obtained in the limit of no lc (i.e., very large Rlc.) A plot of energy and charge transfer rates as a function of Rlc is provided which suggests that a value of Rlc ~ 15 a0 yields the typical literature charge transfer time of about 100 fs. However, energy and charge transfer times become as high as ~ 300 fs for Rlc ~ 25 a0. A closer examination of the charge transfer process P*/F to P+/F- shows that the initial electron transfer is accompanied by a partial delocalization of the P hole onto F which then relocalizes back onto P, consistent with a polaron-like picture in which the nuclei relax to stabilize the resultant redistribution of charges. △ Less

Submitted 23 February, 2021; v1 submitted 29 March, 2018; originally announced March 2018.

Journal ref: The Journal of Chemical Physics 154, 5 (2021)

Davydov-Type Excitonic Effects on the Absorption Spectra of Parallel-Stacked and Herringbone Aggregates of Pentacene: Time-Dependent Density-Functional Theory and Time-Dependent Density-Functional Tight Binding

Authors: Ala Aldin M. H. M. Darghouth, Gabriela Calinao Correa, Sacha Juillard, Mark E. Casida, Alexander Humeniuk, Roland Mitric

Abstract: Exciton formation leads to J-bands in solid pentacene. Describing these exciton bands represents a challenge for both time-dependent (TD) density-functional theory (DFT) and for its semiempirical analogue, namely for TD density-functional tight binding (DFTB) for three reasons (i) solid pentacene and pentacene aggregates are bound only by van der Waals forces which are notoriously difficult to des… ▽ More Exciton formation leads to J-bands in solid pentacene. Describing these exciton bands represents a challenge for both time-dependent (TD) density-functional theory (DFT) and for its semiempirical analogue, namely for TD density-functional tight binding (DFTB) for three reasons (i) solid pentacene and pentacene aggregates are bound only by van der Waals forces which are notoriously difficult to describe with DFT and DFTB, (ii) the proper description of the long-range coupling between molecules, needed to describe Davydov splitting, is not easy to include in TD-DFT with traditional functionals and in TD-DFTB, and (iii) mixing may occur between local and charge transfer excitons, which may, in turn, require special functionals. We assess how far TD-DFT and TD-DFTB have progressed towards a correct description of this type of exciton by including both a dispersion correction for the ground state and a range-separated hybrid functional for the excited state. Analytic results for parallel-stacked ethylene are derived which go beyond Kasha's exciton model in that we are able to make a clear distinction between charge transfer and energy transfer excitons. This is further confirmed when it is shown that range-separated hybrids have a markedly greater effect on charge-transfer excitons than on energy-transfer excitons in the case of parallel-stacked pentacenes. TD-DFT calculations with the CAM-B3LYP functional and TD-lc-DFT calculations lead to negligeable excitonic corrections for the herringbone crystal structure, possibly because of an overcorrection of charge-transfer effects. In this case, TD-DFT calculations with the B3LYP functional or TD-DFTB calculations parameterized to B3LYP give the best results for excitonic corrections for the herringbone crystal structure as judged from comparison with experimental spectra and with Bethe-Salpeter equation calculations from the literature. △ Less

Submitted 8 August, 2018; v1 submitted 18 February, 2018; originally announced March 2018.

Density-Functional Theory Study of the Optoelectronic Properties of π-Conjugated Copolymers for Organic Light-Emitting Diodes

Authors: Tarek Mestiri, Ala Aldin M. H. M. Darghouth, Mark E. Casida, Kamel Alimi

Abstract: Novel low-band-gap copolymer oligomers are proposed on the basis of density functional theory (DFT) quantum chemical calculations of photophysical properties. These molecules have an electron donor-accepter (D-A) architecture involving poly(3-hexylthiophene-2,5-diyl) (P3HT) as D units and furan, aniline, or hydroquinone as A units. Structural parameters, electronic properties, highest occupied mol… ▽ More Novel low-band-gap copolymer oligomers are proposed on the basis of density functional theory (DFT) quantum chemical calculations of photophysical properties. These molecules have an electron donor-accepter (D-A) architecture involving poly(3-hexylthiophene-2,5-diyl) (P3HT) as D units and furan, aniline, or hydroquinone as A units. Structural parameters, electronic properties, highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps and molecular orbital densities are predicted. The charge transfer process between the D unit and the A unit one is supported by analyzing the optical absorption spectra of the compounds and the localization of the HOMO and LUMO. △ Less

Submitted 17 August, 2017; originally announced August 2017.

Partial Density of States Ligand Field Theory (PDOS-LFT): Recovering a LFT-Like Picture and Application to Photoproperties of Ruthenium(II) Polypyridine Complexes

Authors: Denis Magero, Mark E. Casida, George Amolo, Nicholas Makau, Lusweti Kituyi

Abstract: Gas phase density-functional theory (DFT) and time-dependent DFT (TD-DFT) calculations are reported for a data base of 98 ruthenium(II) polypyridine complexes. Comparison with X-ray crystal geometries and with experimental absorption spectra measured in solution show an excellent linear correlation with the results of the gas phase calculations. Comparing this with the usual chemical understanding… ▽ More Gas phase density-functional theory (DFT) and time-dependent DFT (TD-DFT) calculations are reported for a data base of 98 ruthenium(II) polypyridine complexes. Comparison with X-ray crystal geometries and with experimental absorption spectra measured in solution show an excellent linear correlation with the results of the gas phase calculations. Comparing this with the usual chemical understanding based upon ligand field theory (LFT) is complicated by the large number of molecular orbitals present and especially by the heavy mixing of the antibonding metal e*$_{g}$ orbitals with ligand orbitals. Nevertheless, we show that a deeper understanding can be obtained by a partial density-of-states (PDOS) analysis which allows us to extract approximate metal t$_{2g}$ and e*$_{g}$ and ligand π* orbital energies in a well-defined way, thus providing a PDOS analogue of LFT (PDOS-LFT). Not only do PDOS-LFT energies generate a spectrochemical series for the ligands, but orbital energy differences provide good estimates of TD-DFT absorption energies. Encouraged by this success, we use frontier-molecular-orbital-theory-like reasoning to construct a model which allows us in most, but not all, of the cases studied to use PDOS-LFT energies to provide a semiquantitative relationship between luminescence lifetimes at room temperature and liquid nitrogen temperature. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Journal ref: J.Photochem.Photobiol.A.: 348 (2017) 305-325

Modeling the Physical Properties of Environmentally-Friendly Optical Magnetic Switches: DFT and TD-DFT

Authors: Latévi Max Lawson Daku, Mark Earl Casida

Abstract: The dominant majority of the hundreds of available spin-crossover compounds, including the technologically most promising ones, are based on the Earth-abundant metal iron, making these switches particularly appealing in terms of sustainable technology. Furthermore, it has recently been established that these materials may be synthesized using the techniques of Green Chemistry. Spin crossover in tr… ▽ More The dominant majority of the hundreds of available spin-crossover compounds, including the technologically most promising ones, are based on the Earth-abundant metal iron, making these switches particularly appealing in terms of sustainable technology. Furthermore, it has recently been established that these materials may be synthesized using the techniques of Green Chemistry. Spin crossover in transition metal complexes can be induced by a change of temperature, by the application of an external pressure, or a magnetic field, and also by photoexcitation. Given the wide variety of functionalities to which these bistable photomagnetic systems could give access, they may be viewed as the prototypes of molecular-scale optomagnetic switches. Hence, in response to the growing demand for storing and treating increasingly-dense information, much effort has been devoted over several decades to the design of transition metal materials exhibiting spin crossover in technologically-accessible temperature ranges. The cornerstone for designing new efficient photoactive spin-crossover materials remains the ability to predict the magnetic behaviour and the photoresponse of any first-row transition complex, and the manner in which its properties are influenced by its environment. This is a challenge for the inorganic chemist and also, most notably, for the theoretical and the computational chemist. This chapter gives an overview of the issues tied to the application of DFT and TD-DFT to the characterisation of transition metal complexes in the framework of spin-crossover and related phenomena. △ Less

Submitted 23 July, 2020; v1 submitted 11 January, 2012; originally announced January 2012.

Comments: This manuscript has been prepared for submission as a book chapter for Liliana MAMMINO (editor) Green Chemistry and Computational Chemistry, a volume in the Advances in Green and Sustainable Chemistry Series. Series list: https://www.elsevier.com/catalog/all/all/all/advances-in-green-chemistry

Wavelets for Density-Functional Theory and Post-Density-Functional-Theory Calculations

Authors: Bhaarathi Natarajan, Mark E. Casida, Luigi Genovese, Thierry Deutsch

Abstract: We give a fairly comprehensive review of wavelets and of their application to density-functional theory (DFT) and to our recent application of a wavelet-based version of linear-response time-dependent DFT (LR-TD-DFT). Our intended audience is quantum chemists and theoretical solid-state and chemical physicists. Wavelets are a Fourier-transform-like approach which developed primarily in the latter… ▽ More We give a fairly comprehensive review of wavelets and of their application to density-functional theory (DFT) and to our recent application of a wavelet-based version of linear-response time-dependent DFT (LR-TD-DFT). Our intended audience is quantum chemists and theoretical solid-state and chemical physicists. Wavelets are a Fourier-transform-like approach which developed primarily in the latter half of the last century and which was rapidly adapted by engineers in the 1990s because of its advantages compared to standard Fourier transform techniques for multiresolution problems with complicated boundary conditions. High performance computing wavelet codes now also exist for DFT applications in quantum chemistry and solid-state physics, notably the BigDFT code described in this chapter. After briefly describing the basic equations of DFT and LR-TD-DFT, we discuss how they are solved in BigDFT and present new results on the small test molecule carbon monoxide to show how BigDFT results compare against those obtained with the quantum chemistry gaussian-type orbital (GTO) based code deMon2k. In general, the two programs give essentially the same orbital energies, but the wavelet basis of BigDFT converges to the basis set limit much more rapidly than does the GTO basis set of deMon2k. Wavelet-based LR-TD-DFT is still in its infancy, but our calculations confirm the feasibility of implementing LR-TD-DFT in a wavelet-based code. △ Less

Submitted 21 October, 2011; originally announced October 2011.

Comments: 45 pages, 10 figures, book chapter in Theoretical and Computational Methods in Modern Density Functional Theory, Editor: A.K. Roy

Wavelet-Based Linear-Response Time-Dependent Density-Functional Theory

Authors: Bhaarathi Natarajan, Luigi Genovese, Mark E. Casida, Thierry Deutsch, Olga N. Burchak, Christian Philouze, Maxim Y. Balakirev

Abstract: Linear-response time-dependent (TD) density-functional theory (DFT) has been implemented in the pseudopotential wavelet-based electronic structure program BigDFT and results are compared against those obtained with the all-electron Gaussian-type orbital program deMon2k for the calculation of electronic absorption spectra of N2 using the TD local density approximation (LDA). The two programs give c… ▽ More Linear-response time-dependent (TD) density-functional theory (DFT) has been implemented in the pseudopotential wavelet-based electronic structure program BigDFT and results are compared against those obtained with the all-electron Gaussian-type orbital program deMon2k for the calculation of electronic absorption spectra of N2 using the TD local density approximation (LDA). The two programs give comparable excitation energies and absorption spectra once suitably extensive basis sets are used. Convergence of LDA density orbitals and orbital energies to the basis-set limit is significantly faster for BigDFT than for deMon2k. However the number of virtual orbitals used in TD-DFT calculations is a parameter in BigDFT, while all virtual orbitals are included in TD-DFT calculations in deMon2k. As a reality check, we report the x-ray crystal structure and the measured and calculated absorption spectrum (excitation energies and oscillator strengths) of the small organic molecule N-cyclohexyl-2-(4-methoxyphenyl)imidazo[1,2-a]pyridin-3-amine. △ Less

Submitted 17 August, 2011; originally announced August 2011.

Journal ref: Chem. Phys. 402 (2012)29-40

Progress in Time-Dependent Density-Functional Theory

Authors: M. E. Casida, M. Huix-Rotllant

Abstract: The classic density-functional theory (DFT) formalism introduced by Hohenberg, Kohn, and Sham in the mid-1960s, is based upon the idea that the complicated N-electron wavefunction can be replaced with the mathematically simpler 1-electron charge density in electronic struc- ture calculations of the ground stationary state. As such, ordinary DFT is neither able to treat time-dependent (TD) problems… ▽ More The classic density-functional theory (DFT) formalism introduced by Hohenberg, Kohn, and Sham in the mid-1960s, is based upon the idea that the complicated N-electron wavefunction can be replaced with the mathematically simpler 1-electron charge density in electronic struc- ture calculations of the ground stationary state. As such, ordinary DFT is neither able to treat time-dependent (TD) problems nor describe excited electronic states. In 1984, Runge and Gross proved a theorem making TD-DFT formally exact. Information about electronic excited states may be obtained from this theory through the linear response (LR) theory formalism. Begin- ning in the mid-1990s, LR-TD-DFT became increasingly popular for calculating absorption and other spectra of medium- and large-sized molecules. Its ease of use and relatively good accuracy has now brought LR-TD-DFT to the forefront for this type of application. As the number and the diversity of applications of TD-DFT has grown, so too has grown our understanding of the strengths and weaknesses of the approximate functionals commonly used for TD-DFT. The objective of this article is to continue where a previous review of TD-DFT in this series [Annu. Rev. Phys. Chem. 55: 427 (2004)] left off and highlight some of the problems and solutions from the point of view of applied physical chemistry. Since doubly-excited states have a particularly important role to play in bond dissociation and formation in both thermal and photochemistry, particular emphasis will be placed upon the problem of going beyond or around the TD-DFT adiabatic approximation which limits TD-DFT calculations to nominally singly-excited states. Posted with permission from the Annual Review of Physical Chemistry, Volume 63 \c{opyright} 2012 by Annual Reviews, http://www.annualreviews.org. △ Less

Submitted 2 August, 2011; originally announced August 2011.

Real-Time Dynamics and Conical Intersections

Authors: Mark Earl Casida, Bhaarathi Natarajan, Thierry Deutsch

Abstract: This book chapter is a general introduction to photo-dynamics. An outlined structure to the theoretical studies on classical/quantum/mixed dynamics were described from the literature point of view. Such methods get constrained for the practical applications due to parametrizations/computational cost. As an alternate TDDFT-based dynamics studies are promising. we have shown that the TDDFT calculati… ▽ More This book chapter is a general introduction to photo-dynamics. An outlined structure to the theoretical studies on classical/quantum/mixed dynamics were described from the literature point of view. Such methods get constrained for the practical applications due to parametrizations/computational cost. As an alternate TDDFT-based dynamics studies are promising. we have shown that the TDDFT calculations could be as accurate as high quality monte-carlo calculations and the reliability of the TDDFT calculations for locating the conical intersection through the simple ring-opening reaction of oxirane. Pros and cons of TDDFT for photo-dynamics calculations have been presented for the development of this fast evolving field. △ Less

Submitted 9 February, 2011; originally announced February 2011.

Comments: 26 pages, 7 figures, book chapter for the second edition of the book entitled " Time-Dependent-Density-Functional-Theory" by TDDFT experts from Springer

Assessment of Dressed Time-Dependent Density-Functional Theory for the Low-Lying Valence States of 28 Organic Chromophores

Authors: Miquel Huix-Rotllant, Andrei Ipatov, Angel Rubio, Mark E. Casida

Abstract: Almost all time-dependent density-functional theory (TDDFT) calculations of excited states make use of the adiabatic approximation, which implies a frequency-independent exchange-correlation kernel that limits applications to one-hole/one-particle states. To remedy this problem, Maitra et al.[J.Chem.Phys. 120, 5932 (2004)] proposed dressed TDDFT (D-TDDFT), which includes explicit two-hole/two-part… ▽ More Almost all time-dependent density-functional theory (TDDFT) calculations of excited states make use of the adiabatic approximation, which implies a frequency-independent exchange-correlation kernel that limits applications to one-hole/one-particle states. To remedy this problem, Maitra et al.[J.Chem.Phys. 120, 5932 (2004)] proposed dressed TDDFT (D-TDDFT), which includes explicit two-hole/two-particle states by adding a frequency-dependent term to adiabatic TDDFT. This paper offers the first extensive test of D-TDDFT, and its ability to represent excitation energies in a general fashion. We present D-TDDFT excited states for 28 chromophores and compare them with the benchmark results of Schreiber et al.[J.Chem.Phys. 128, 134110 (2008).] We find the choice of functional used for the A-TDDFT step to be critical for positioning the 1h1p states with respect to the 2h2p states. We observe that D-TDDFT without HF exchange increases the error in excitations already underestimated by A-TDDFT. This problem is largely remedied by implementation of D- TDDFT including Hartree-Fock exchange. △ Less

Submitted 31 December, 2010; originally announced January 2011.

Journal ref: Chem.Phys. 391 (2011) 120-129

Many-Body Perturbation Theory (MBPT) and Time-Dependent Density-Functional Theory (TD-DFT): MBPT Insights About What is Missing in, and Corrections to, the TD-DFT Adiabatic Approximation

Authors: Miquel Huix-Rotllant, Mark E. Casida

Abstract: In their famous paper Kohn and Sham formulated a formally exact density-functional theory (DFT) for the ground-state energy and density of a system of $N$ interacting electrons, albeit limited at the time by certain troubling representability questions. As no practical exact form of the exchange-correlation (xc) energy functional was known, the xc-functional had to be approximated, ideally by a lo… ▽ More In their famous paper Kohn and Sham formulated a formally exact density-functional theory (DFT) for the ground-state energy and density of a system of $N$ interacting electrons, albeit limited at the time by certain troubling representability questions. As no practical exact form of the exchange-correlation (xc) energy functional was known, the xc-functional had to be approximated, ideally by a local or semilocal functional. Nowadays however the realization that Nature is not always so nearsighted has driven us up Perdew's Jacob's ladder to find increasingly nonlocal density/wavefunction hybrid functionals. Time-dependent (TD-) DFT is a younger development which allows DFT concepts to be used to describe the temporal evolution of the density in the presence of a perturbing field. Linear response (LR) theory then allows spectra and other information about excited states to be extracted from TD-DFT. Once again the exact TD-DFT xc-functional must be approximated in practical calculations and this has historically been done using the TD-DFT adiabatic approximation (AA) which is to TD-DFT very much like what the local density approximation (LDA) is to conventional ground-state DFT. While some of the recent advances in TD-DFT focus on what can be done within the AA, others explore ways around the AA. After giving an overview of DFT, TD-DFT, and LR-TD-DFT, this article will focus on many-body corrections to LR-TD-DFT as one way to building hybrid density-functional/wavefunction methodology for incorporating aspects of nonlocality in time not present in the AA. △ Less

Submitted 15 June, 2015; v1 submitted 9 August, 2010; originally announced August 2010.

Comments: 56 pages, 17 figures

Troubleshooting Time-Dependent Density-Functional Theory for Photochemical Applications: Oxirane

Authors: Felipe Cordova, L. Joubert Doriol, Andrei Ipatov, Mark E. Casida, Claudia Filippi, Alberto Vela

Abstract: The development of analytic-gradient methodology for excited states within conventional time-dependent density-functional theory (TDDFT) would seem to offer a relatively inexpensive alternative to better established quantum-chemical approaches for the modeling of photochemical reactions. However, even though TDDFT is formally exact, practical calculations involve the use of approximate functiona… ▽ More The development of analytic-gradient methodology for excited states within conventional time-dependent density-functional theory (TDDFT) would seem to offer a relatively inexpensive alternative to better established quantum-chemical approaches for the modeling of photochemical reactions. However, even though TDDFT is formally exact, practical calculations involve the use of approximate functionals, in particular the TDDFT adiabatic approximation, whose use in photochemical applications must be further validated. Here, we investigate the prototypical case of the symmetric CC ring opening of oxirane. We demonstrate by direct comparison with the results of high-quality quantum Monte Carlo calculations that, far from being an approximation on TDDFT, the Tamm-Dancoff approximation (TDA) is a practical necessity for avoiding triplet instabilities and singlet near instabilities, thus helping maintain energetically reasonable excited-state potential energy surfaces during bond breaking. Other difficulties one would encounter in modeling oxirane photodynamics are pointed out but none of these is likely to prevent a qualitatively correct TDDFT/TDA description of photochemistry in this prototypical molecule. △ Less

Submitted 10 August, 2007; originally announced August 2007.

Comments: 19 pages, 17 figures, submitted to the Journal of Chemical Physics

Journal ref: Felipe Cordova, L. Joubert Doriol, Andrei Ipatov, Mark E. Casida, Claudia Filippi, and Alberto Vela, J. Chem. Phys. 127, 164111 (2007)