Showing 1–47 of 47 results for author: Casari, C S

Surface Sensitive Raman Response of Metal-Supported Monolayer MoS$_2$

Authors: Francesco Tumino, Sergio Tosoni, Paolo D'Agosta, Valeria Russo, Carlo Enrico Bottani, Andrea Li Bassi, Carlo Spartaco Casari

Abstract: The Raman spectrum of monolayer (ML) MoS$_2$ is remarkably affected by the interaction with metals. In this work we studied ML-MoS$_2$ supported by the Ag(111) and Ag(110) surfaces by using a combined experimental and theoretical approach. The MoS$_2$ layer was directly grown on atomically clean Ag(111) and Ag(110) surfaces by pulsed laser deposition, followed by in-situ thermal annealing under ul… ▽ More The Raman spectrum of monolayer (ML) MoS$_2$ is remarkably affected by the interaction with metals. In this work we studied ML-MoS$_2$ supported by the Ag(111) and Ag(110) surfaces by using a combined experimental and theoretical approach. The MoS$_2$ layer was directly grown on atomically clean Ag(111) and Ag(110) surfaces by pulsed laser deposition, followed by in-situ thermal annealing under ultra-high vacuum conditions. The morphology and structure of the two systems were characterized in-situ by scanning tunneling microscopy, providing atomic-scale information on the relation between the MoS$_2$ lattice and the underlying surface. Raman spectroscopy revealed differences between the two MoS$_2$-metal interfaces, especially concerning the behavior of the out-of-plane $A'_1$ vibrational mode, which splits into two contributions on Ag(110). The metal-induced effects on MoS$_2$ vibrational modes are further evidenced by transferring MoS$_2$ onto a more inert substrate (SiO$_2$/Si), where the MoS$_2$ Raman response displays a more ``freestanding-like'' behavior. The experimental data were interpreted with the support of ab-initio calculations of the vibrational modes, which provided insight into the effect of interface properties, such as strain and out-of-plane distortion. Our results highlight the influence of the interaction with metals on MoS$_2$ vibrational properties, and show the high sensitivity of MoS$_2$ Raman modes to the surface structure of the supporting metal. △ Less

Submitted 11 April, 2025; v1 submitted 31 March, 2025; originally announced April 2025.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in The Journal of Physical Chemistry C, copyright \c{opyright} 2025 American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.jpcc.4c06548

Journal ref: J. Phys. Chem. C 2025, 129, 2, 1457-1466

Wettability and sp2/sp3 ratio effects on supercapacitor performance of N-doped hydrogenated amorphous Carbon Nanofoam

Authors: Subrata Ghosh, Giacomo Pagani, Andrea Macrelli, Alberto Calloni, Gianlorenzo Bussetti, Andrea Lucotti, Matteo Tommasini, Raffaella Suriano, Valeria Russo, Agnieszka M. Jastrzkebska, Cinzia Casiraghi, Andrea Li Bassi, Carlo S. Casari

Abstract: Pulsed laser-deposited amorphous carbon nanofoams could be a potential candidate for electrochemical energy storage applications due to their properties such as ultralightweight, huge volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization. It is known that the charge-storage of carbon nanostructures containing disordered sp2-domains is determined by the wettability, su… ▽ More Pulsed laser-deposited amorphous carbon nanofoams could be a potential candidate for electrochemical energy storage applications due to their properties such as ultralightweight, huge volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization. It is known that the charge-storage of carbon nanostructures containing disordered sp2-domains is determined by the wettability, surface area, and porosity of carbon nanostructures. However, their charge-storage performance is limited to the areal capacitance of the order of a few mF/cm2. We enhanced the supercapacitor performance of nitrogen-doped amorphous carbon nanofoam by engineering its wettability and sp2-C/sp3-C ratio by vacuum annealing. The specific capacitance was enhanced around fifty times and the widened voltage of the device increased from 0.8 to 1.1 V compared to as-grown nanofoam. In addition, we examined for the first time the initial increase in specific capacitance of the aqueous symmetric supercapacitor with respect to the scan rate, employing in-situ measurements coupling Raman spectroscopy and electrochemistry. We attribute this effect, although observed in previous literatures but unexplained, to the electrochemical activation induced by structural changes during the charge storage performance. This optimization of pulsed laser-deposited carbon nanofoam may open an avenue for fabricating lightweight and porous nanostructures for advanced macro-to-micro-supercapacitor devices. △ Less

Submitted 17 March, 2025; originally announced March 2025.

Comments: 23 Pages including supporting materials, 10 Figures, 6 supporting figures, 4 supporting tables

Low-density functionalized amorphous carbon nanofoam as binder-free Supercapacitor electrode

Authors: Subrata Ghosh, Massimiliano Righi, Andrea Macrelli, Francesco Goto, Marco Agozzino, Gianlorenzo Bussetti, Valeria Russo, Andrea Li Bassi, Carlo S. Casari

Abstract: Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon n… ▽ More Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon nanofoam and nitrogen-functionalized carbon nanofoams are directly grown on the desired substrate under different background gases (Ar, N2, N2-H2), and employed as supercapacitor electrodes. Among the background gases used in synthesis, the use of nitrogen yields nanofoam with higher thickness and more N-content with higher graphitic-N. From the test of amorphous carbon nanofoam supercapacitor device, nitrogenated amorphous carbon electrode shows a higher areal capacitance of 4.1 mF/cm2 at 20 mV/s in aqueous electrolyte, a better capacitance retention at higher current, and excellent cycle stability (98%) over 10000 charge-discharge cycles are achieved compared to not-functionalized counterpart prepared under Ar background gas (2.7 mF/cm2 and cycle stability of 88%). △ Less

Submitted 17 March, 2025; v1 submitted 30 October, 2024; originally announced October 2024.

Comments: 18 pages main article, 3 pages supporting material, 7 figures, 6 supporting figures, 3 table

Journal ref: Carbon Trends 2025

Cumulenic sp-carbon Atomic Wires Wrapped Polymers for Supercapacitor Application

Authors: Subrata Ghosh, Massimiliano Righi, Simone Melesi, Yu Qiu, Rik R. Tykwinski, Carlo S. Casari

Abstract: Carbon atomic wires, a linear atomic chain of sp-carbon, is theoretically predicted to have around five times higher surface area than graphene, notable charge mobilities, as well as excellent optical and thermal properties. Despite these impressive properties, the properties of sp-carbon as an electrochemical energy-storage electrode have not been reported so far. Herein, we prepare solution proc… ▽ More Carbon atomic wires, a linear atomic chain of sp-carbon, is theoretically predicted to have around five times higher surface area than graphene, notable charge mobilities, as well as excellent optical and thermal properties. Despite these impressive properties, the properties of sp-carbon as an electrochemical energy-storage electrode have not been reported so far. Herein, we prepare solution processed thin films of tetraphenyl[3]cumulenic sp-carbon atomic wires embedded in a polymer matrix, in which sp-carbon atomic wires feature three cumulated carbon-carbon double bonds terminated at each end by two phenyl groups. Raman and UV-visible spectroscopy are used to confirm the presence and possible degradation of sp-carbons inside the polymeric matrix. Finally, we investigate the supercapacitor performance of cumulenic sp-carbon atomic wires embedded polymer in three aqueous mediums, namely 1M Na2SO4 (neutral), 1M H2SO4 (acidic), and 6M KOH (basic). The results suggest 6M KOH is the best electrolyte to obtain high charge-storage performance of device with areal capacitance of 2.4 mF/cm2 at 20 mV/s, 85% cycle stability after 10000 charge-discharge cycles, and excellent frequency response. △ Less

Submitted 30 October, 2024; originally announced October 2024.

Comments: 15 pages, 2 supplementary pages, 5 figures, 2 supporting figures

Journal ref: Carbon 2025

Universal Vibrational Anharmonicity in Carbyne-like Materials

Authors: Johannes M. A. Lechner, Pietro Marabotti, Lei Shi, Thomas Pichler, Carlo Spartaco Casari, Sebastian Heeg

Abstract: Carbyne, an infinite linear chain of carbon atoms, is the truly one-dimensional allotrope of carbon. While ideal carbyne and its fundamental properties have remained elusive, carbyne-like materials like carbyne chains confined inside carbon nanotubes are available for study. Here, we probe the longitudinal optical phonon (C-mode) of confined carbyne chains by Raman spectroscopy up to the third ove… ▽ More Carbyne, an infinite linear chain of carbon atoms, is the truly one-dimensional allotrope of carbon. While ideal carbyne and its fundamental properties have remained elusive, carbyne-like materials like carbyne chains confined inside carbon nanotubes are available for study. Here, we probe the longitudinal optical phonon (C-mode) of confined carbyne chains by Raman spectroscopy up to the third overtone. We observe a strong vibrational anharmonicity that increases with decreasing C-mode frequency, reaching up to 8% for the third overtone. Moreover, we find that the relation between vibrational anharmonicity and C-mode frequency is universal to carbyne-like materials, including ideal carbyne. This establishes experimentally that carbyne and related materials have pronounced anharmonic potential landscapes which must be included in the theoretical description of their structure and properties. △ Less

Submitted 18 October, 2024; originally announced October 2024.

One-step Pulsed Laser Deposition of Metal oxynitride/Carbon Composites for Supercapacitor Application

Authors: Subrata Ghosh, Giacomo Pagani, Massimilano Righi, Chengxi Hou, Valeria Russo, Carlo S. Casari

Abstract: Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser de… ▽ More Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser deposition at room temperature. Co-ablation of titanium and vanadium nitride targets together with graphite allowed us to synthesize carbon-metal oxynitride porous nanocomposite and exploit them as a binder-free thin film supercapacitor electrode in aqueous electrolyte. We show that the elemental composition ratio and hence the structural properties can be tuned by selecting target configuration and by manipulating the ablation position. We investigate how this tuning capability impacts their charge-storage performances. We anticipate the utilization of as-synthesized various composites in a single PLD production run as next-generation active materials for flexible energy storage and optoelectronic applications. △ Less

Submitted 29 August, 2024; v1 submitted 16 May, 2024; originally announced May 2024.

Comments: 18 pages, 8 Figures, 1 table, 9 figures in supplementary figures

Journal ref: Journal of Physics D: Applied Physics 2024

Ballistic-aggregated Carbon Nanofoam in Target-side of Pulsed Laser Deposition for Energy Storage Applications

Authors: Subrata Ghosh, Massimiliano Righi, Andrea Macrelli, Giorgio Divitini, Davide Orecchia, Alessandro Maffini, Francesco Goto, Gianlorenzo Bussetti, David Dellasega, Valeria Russo, Andrea Li Bassi, Carlo S. Casari

Abstract: In pulsed laser deposition, along the traditionally exploited deposition on the front-side of the plasma-plume, a coating forms on the surface of the target as well. For reproducibility, this residue is usually cleaned and discarded. Here we instead investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. The ballistic-aggregated, target-side nanofoam… ▽ More In pulsed laser deposition, along the traditionally exploited deposition on the front-side of the plasma-plume, a coating forms on the surface of the target as well. For reproducibility, this residue is usually cleaned and discarded. Here we instead investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. The ballistic-aggregated, target-side nanofoam is compact and features a larger fraction of sp2-carbon, higher nitrogen content with higher graphitic-N and lower oxygen content with fewer COOH groups than that of diffusive-aggregated conventional nanofoams. They are highly hydrogenated graphite-like amorphous carbon and superhydrophilic. The resulting symmetric micro-supercapacitor delivers higher volumetric capacitance of 522 mF/cm3 at 100 mV/s and 104% retention after 10000 charge-discharge cycles over conventional nanofoam (215 mF/cm3 and 85% retention) with an areal capacitance of 134 μF/cm2 at 120 Hz and ultrafast frequency response. Utilizing the normally discarded target-side material can therefore enable high performing devices while reducing waste, cost and energy input per usable product. leading towards a greater sustainability on nanomaterials synthesis and deposition techniques. △ Less

Submitted 27 August, 2024; v1 submitted 14 May, 2024; originally announced May 2024.

Comments: 22 pages, 8 figures in text, 8 figures in supplementary, 1 table

Journal ref: ChemSusChem 2024

Unravelling the Band Structure and Orbital Character of a $π$-Conjugated 2D Graphdiyne-Based Organometallic Network

Authors: Paolo D'Agosta, Simona Achilli, Francesco Tumino, Alessio Orbelli Biroli, Giovanni Di Santo, Luca Petaccia, Giovanni Onida, Andrea Li Bassi, Jorge Lobo-Checa, Carlo S. Casari

Abstract: Graphdiyne-based carbon systems generate intriguing layered sp-sp$^2$ organometallic lattices, characterized by flexible acetylenic groups connecting planar carbon units through metal centers. At their thinnest limit, they can result in two-dimensional (2D) organometallic networks exhibiting unique quantum properties and even confining the surface states of the substrate, which is of great importa… ▽ More Graphdiyne-based carbon systems generate intriguing layered sp-sp$^2$ organometallic lattices, characterized by flexible acetylenic groups connecting planar carbon units through metal centers. At their thinnest limit, they can result in two-dimensional (2D) organometallic networks exhibiting unique quantum properties and even confining the surface states of the substrate, which is of great importance for fundamental studies. In this work, we present the on-surface synthesis of a highly crystalline 2D organometallic network grown on Ag(111). The electronic structure of this mixed honeycomb-kagome arrangement - investigated by angle-resolved photoemission spectroscopy and scanning tunneling spectroscopy - reveals a strong electronic conjugation within the network, leading to the formation of two intense electronic band-manifolds. In comparison to theoretical density functional theory calculations, we observe that these bands exhibit a well-defined orbital character that can be associated with distinct regions of the sp-sp$^2$ monomers. Moreover, we find that the halogen by-products resulting from the network formation locally affect the pore-confined states, causing a significant energy shift. This work contributes to the understanding of the growth and electronic structure of graphdiyne-like 2D networks, providing insights into the development of novel carbon materials beyond graphene with tailored properties. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Comments: 11 pages, 4 figures + supporting information (5 pages, 10 figures)

Effects of inorganic seed promoters on MoS2 few-layers grown via chemical vapor deposition

Authors: Alessandro Cataldo, Pinaka Pani Tummala, Christian Martella, Carlo Spartaco Casari, Alessandro Molle, Alessio Lamperti

Abstract: In the last years, transition metal dichalcogenides (TMDs), especially at the two-dimensional (2D) limit, gained a large interest due to their unique optical and electronic properties. Among them, MoS2 received great attention from the scientific community due to its versatility, workability, and applicability in a large number of fields such as electronics, optoelectronics and electrocatalysis. T… ▽ More In the last years, transition metal dichalcogenides (TMDs), especially at the two-dimensional (2D) limit, gained a large interest due to their unique optical and electronic properties. Among them, MoS2 received great attention from the scientific community due to its versatility, workability, and applicability in a large number of fields such as electronics, optoelectronics and electrocatalysis. To open the possibility of 2D-MoS2 exploitation, its synthesis over large macroscopic areas using cost-effective methods is fundamental. In this study, we report a method for the synthesis of large-area (~ cm2) few-layers MoS2 via liquid precursor CVD (L-CVD), where the Mo precursor (i.e. ammonium heptamolybdate AHM) is provided via a solution that is spin-coated over the substrate. Given the capability of organic and inorganic molecules, such as alkaline salts, to enhance MoS2 growth, we investigated the action of different inorganic salts as seed promoters. In particular, by using visible Raman spectroscopy, we focused on the effect of Na(OH), KCl, KI, and Li(OH) on the thickness, morphology, uniformity and degree of coverage of the grown MoS2. We optimized the process tuning parameters such as the volume of spin-coated solution, the growth temperature, and the seed promoter concentration, to synthesise the lowest possible thickness which resulted to be 2 layers (2L) of the highest quality. We witnessed that the addition of an inorganic seed promoter in the solution improves the extension of the grown MoS2 promoting lateral growth front, and therefore the degree of coverage. From this study, we conclude that, amongst the investigated seed promoters, K-based salts proved to grant the growth of high-quality two-layer MoS2 with optimal and uniform coverage of the SiO2/Si substrate surface. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Tailoring the Dimensionality of Tellurium Nanostructures via Vapor Transport Growth

Authors: Sara Ghomi, Pinaka Pani Tummala, Raimondo Cecchini, Carlo S. Casari, Alessio Lamperti, Carlo Grazianetti, Christian Martella, Alessandro Molle

Abstract: The interest in tellurium nanostructures is on the rise due to their outstanding physical properties including high carrier mobility, anisotropic charge conduction, photoconductivity, thermoelectricity, and piezoelectricity. Applications in related technologies require tailoring the synthesis of tellurium from its preferred vertical growth toward the lateral growth. Here, the synthesis of pillar-l… ▽ More The interest in tellurium nanostructures is on the rise due to their outstanding physical properties including high carrier mobility, anisotropic charge conduction, photoconductivity, thermoelectricity, and piezoelectricity. Applications in related technologies require tailoring the synthesis of tellurium from its preferred vertical growth toward the lateral growth. Here, the synthesis of pillar-like and pennette-like structures of tellurium through a powder vapor deposition technique has been discussed. It has been shown that exploiting salt additives such as NaCl in vapor deposition technique can enhance tellurium pillar dimensionality toward large planar grains. Further, we report on the synthesis of hexagonal ultrathin tellurium nanoflakes, namely tellurene, from few-layer to monolayer thickness by optimizing the growth kinetics without the usage of any additives. In addition, we explore the surface quality and physical properties of as-grown two-dimensional (2D) tellurium, using a variety of characterization techniques, including Raman spectroscopy, scanning electron microscopy, atomic force microscopy, and Kelvin probe force microscopy. This study provides a pivotal scheme for enabling scalable 2D tellurium integration in numerous potential applications for electronics and optoelectronic devices. △ Less

Submitted 18 September, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: 17 pages, 13 figures

Disclosing Early Excited State Relaxation Events in Prototypical Linear Carbon Chains

Authors: Piotr Kabaciński, Pietro Marabotti, Patrick Serafini, Daniele Fazzi, Giulio Cerullo, Carlo S. Casari, Margherita Zavelani-Rossi

Abstract: One-dimensional (1D) linear nanostructures comprising sp-hybridized carbon atoms, as derivatives of the prototypical allotrope known as carbyne, are predicted to possess outstanding mechanical, thermal, and electronic properties. Despite recent advances in the synthesis, their chemical and physical properties are still poorly understood. Here, we investigate the photophysics of a prototypical poly… ▽ More One-dimensional (1D) linear nanostructures comprising sp-hybridized carbon atoms, as derivatives of the prototypical allotrope known as carbyne, are predicted to possess outstanding mechanical, thermal, and electronic properties. Despite recent advances in the synthesis, their chemical and physical properties are still poorly understood. Here, we investigate the photophysics of a prototypical polyyne (i.e., 1D chain with alternating single and triple carbon bonds), as the simplest model of finite carbon wire and as a prototype of sp-carbon-based chains. We perform transient absorption experiments with high temporal resolution (<30 fs) on monodispersed hydrogen-capped hexayne H$-$(C$\equiv$C)$_6-$H synthesized by laser ablation in liquid. With the support of detailed computational studies based on ground state density functional theory (DFT) and excited state time-dependent (TD)-DFT calculations, we provide a comprehensive description of the excited state relaxation processes at early times following photoexcitation. We show that the internal conversion from a bright high-energy singlet excited state to a low-lying singlet dark state is ultrafast and takes place with a 200-fs time constant, followed by thermalization on the picosecond timescale and decay of the low-energy singlet state with hundreds of picoseconds time constant. We also show that the timescale of these processes does not depend on the end groups capping the sp-carbon chain. The understanding of the primary photo-induced events in polyynes is of key importance both for fundamental knowledge and for potential optoelectronic and light-harvesting applications of low dimensional nanostructured carbon-based materials. △ Less

Submitted 28 July, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

Comments: 24 pages, 6 figures

A single liquid chromatography procedure to concentrate, separate and collect size-selected polyynes produced by pulsed laser ablation in water

Authors: Sonia Peggiani, Anna Facibeni, Pietro Marabotti, Alessandro Vidale, Stefano Scotti, Carlo S. Casari

Abstract: Polyynes are linear carbon chains characterized by alternated single and triple bonds and terminated by hydrogen or other terminal substituents. They can be synthesized by pulsed laser ablation in liquid (PLAL) as a scalable, cost-effective, and fast physical technique. Water can be employed as a solvent for PLAL to avoid toxicity problems and to reduce costs compared to organic solvents. However,… ▽ More Polyynes are linear carbon chains characterized by alternated single and triple bonds and terminated by hydrogen or other terminal substituents. They can be synthesized by pulsed laser ablation in liquid (PLAL) as a scalable, cost-effective, and fast physical technique. Water can be employed as a solvent for PLAL to avoid toxicity problems and to reduce costs compared to organic solvents. However, in this case, the production yield of polyynes reached is extremely low and prevents further characterization and implementation in new functional materials. In this work, we synthesized polyynes by pulsed laser ablation in water and we optimized the process parameters to improve the yield of polyynes by PLAL. Then, we developed a procedure entirely based on reversed-phase high-performance liquid chromatography (RP-HPLC) which effectively enables the concentration, separation and collection of polyynes according to their length. Since the polyynes sample is an aqueous solution, we could inject it directly into the RP-HPLC column without the dilution step required in the case of a sample in an organic solvent. Thanks to our single RP-HPLC procedure, it is possible to highly increase the concentration and separately characterize different size-selected polyynes for further use in functional materials. △ Less

Submitted 28 October, 2022; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: 8 pages, 4 figures

Journal ref: Fullerenes, Nanotubes and Carbon Nanostructures, 2023

Pulsed laser ablation in liquid of sp-carbon chains: status and recent advances

Authors: Pietro Marabotti, Sonia Peggiani, Alessandro Vidale, Carlo Spartaco Casari

Abstract: This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid. In recent years, pulsed laser ablation in liquid (PLAL) has been widely employed for polyynes synthesis thanks to its flexibility with varying laser parameters, solvents, and targets. This allows the control of sp-carbon chains properties as yield, length, terminat… ▽ More This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid. In recent years, pulsed laser ablation in liquid (PLAL) has been widely employed for polyynes synthesis thanks to its flexibility with varying laser parameters, solvents, and targets. This allows the control of sp-carbon chains properties as yield, length, termination and stability. Although many reviews related to PLAL have been published, a comprehensive work reporting the current status and advances related to the synthesis of sp-carbon chains by PLAL is still missing. Here we first review the principle of PLAL and the mechanisms of formation of sp-carbon chains. Then we discuss the role of laser fluence (i.e. energy density), solvent, and target for sp-carbon chains synthesis. Lastly, we report the progress related to the prolonged stability of sp-carbon chains by PLAL encapsulated in polymeric matrices. This review will be a helpful guide for researchers interested in synthesizing sp-carbon chains by PLAL. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Journal ref: Chinese Physics B, 2022

Vibrational properties of graphdiynes as 2D carbon materials beyond graphene

Authors: P. Serafini, A. Milani, M. Tommasini, C. Castiglioni, D. M. Proserpio, C. E. Bottani, C. S. Casari

Abstract: Two-dimensional (2D) hybrid sp-sp2 carbon systems are an appealing subject for science and technology. For these materials, topology and structure significantly affect electronic and vibrational properties. We investigate here by periodic density-functional theory (DFT) calculations we here investigate the Raman and IR spectra of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and… ▽ More Two-dimensional (2D) hybrid sp-sp2 carbon systems are an appealing subject for science and technology. For these materials, topology and structure significantly affect electronic and vibrational properties. We investigate here by periodic density-functional theory (DFT) calculations we here investigate the Raman and IR spectra of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures and topologies. By joining DFT calculations with symmetry analysis, we assign the IR and Raman modes in the spectra of all the investigated systems. On this basis, we discuss how the modulation of the Raman and IR active bands depends on the different interactions between sp and sp2 domains. The symmetry-based classification allows identifying the marker bands sensitive to the different peculiar topologies. These results show the effectiveness of vibrational spectroscopy for the characterization of new nanostructures, deepening the knowledge of the subtle interactions that take place in these 2D materials. △ Less

Submitted 6 May, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Journal ref: Phys. Chem. Chem. Phys., 2022, 24, 10524

Steric hindrance in the on-surface synthesis of diethynyl-linked anthracene polymers

Authors: Simona Achilli, Francesco Tumino, Andi Rabia, Alessio Orbelli Biroli, Andrea Li Bassi, Alberto Bossi, Nicola Manini, Giovanni Onida, Guido Fratesi, Carlo Spartaco Casari, ---

Abstract: Hybrid sp-sp2 structures can be efficiently obtained on metal substrates via on-surface synthesis. The choice of both the precursor and of the substrate impacts on the effectiveness of the process and the stability of the formed structures. Here we demonstrate that using anthracene-based molecules as precursor, the formation on Au(111) of polymers hosting sp carbon chains is affected by the steric… ▽ More Hybrid sp-sp2 structures can be efficiently obtained on metal substrates via on-surface synthesis. The choice of both the precursor and of the substrate impacts on the effectiveness of the process and the stability of the formed structures. Here we demonstrate that using anthracene-based molecules as precursor, the formation on Au(111) of polymers hosting sp carbon chains is affected by the steric hindrance between aromatic groups. In particular, by scanning tunneling microscopy and density functional theory calculations we show that the de-metalation of organometallic structures induces a lateral separation of adjacent polymers preventing the formation of ordered domains. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Journal ref: Phys. Chem. Chem. Phys., 2022,24, 13616-13624

Stable and Solution-Processable Cumulenic sp-Carbon Wires: A New Paradigm for Organic Electronics

Authors: Stefano Pecorario, Alberto D. Scaccabarozzi, Daniele Fazzi, Edgar Gutiérrez-Fernández, Vito Vurro, Lorenzo Maserati, Mengting Jiang, Tommaso Losi, Bozheng Sun, Rik R. Tykwinski, Carlo S. Casari, Mario Caironi

Abstract: Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of l… ▽ More Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of linear carbon atomic wires (CAWs), with intriguing and even superior predicted electronic properties. While CAWs represent a vibrant field of research, to date, they have only been applied sparingly to molecular devices. The recent observation of the field-effect in microcrystalline cumulenes suggests their potential applications in solution-processed thin-film transistors but concerns surrounding the stability and electronic performance have precluded developments in this direction. In the present study, ideal field-effect characteristics are demonstrated for solution-processed thin films of tetraphenyl[3]cumulene, the shortest semiconducting CAW. Films are deposited through a scalable, large-area, meniscus-coating technique, providing transistors with hole mobilities in excess of 0.1 cm$^2$ V$^{-1}$ s$^{-1}$, as well as promising operational stability under dark conditions. These results offer a solid foundation for the exploitation of a vast class of molecular semiconductors for organic electronics based on sp-hybridized carbon systems and create a previously unexplored paradigm. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Journal ref: Adv. Mater. 2022, 2110468

Nanoparticle-enhanced Multifunctional Nanocarbons as Metal-ion Battery and Capacitor Anodes and Supercapacitor Electrodes -- Review

Authors: Subrata Ghosh, S. R. Polaki, Andrea Macrelli, Carlo S. Casari, Suelen Barg, Sang Mun Jeong, Kostya, Ostrikov

Abstract: As renewable energy is becoming a critical energy source to meet the global demand, electrochemical energy storage devices become indispensable for the efficient energy storage and reliable supply. The electrode material is the key factor determining the energy storage capacity and the power delivery of the devices. Carbon-based materials are emerging as a viable candidate for electrodes, yet thei… ▽ More As renewable energy is becoming a critical energy source to meet the global demand, electrochemical energy storage devices become indispensable for the efficient energy storage and reliable supply. The electrode material is the key factor determining the energy storage capacity and the power delivery of the devices. Carbon-based materials are emerging as a viable candidate for electrodes, yet their low energy densities impede the development of advanced energy storage materials. Nanoparticle decoration of the carbon structures is one of the most promising and easy-to-implement a strategy to enhance the charge-storage performance of carbon-based electrodes. Decoration by nanoparticles of metals, metal oxides, nitrides, carbides, phosphides, chalcogenides, and bimetallic components lead to significant enhancements in the structural and electronic properties, pore refinement, charge storage, and charge transfer kinetics of both pristine and doped carbon structures, thereby making their performance promising for next-generation energy storage devices. This review covers the state-of-art nanoparticle decorated nanocarbons for battery, supercapacitor, and metal-ion capacitor applications. A critical analysis of the elemental composition, structure, associated physico-chemical properties and performance relationships of nanoparticle-decorated nanocarbon electrodes is provided as well to inform the future development of the next generation of advanced energy storage materials, devices, and systems. △ Less

Submitted 29 April, 2022; v1 submitted 28 January, 2022; originally announced January 2022.

Comments: 67 pages, 17 figures, 5 tables

Journal ref: Journal of Physics D: Applied Physics, 2022

Graphdiynes interacting with metal surfaces: first-principles electronic and vibrational properties

Authors: Simona Achilli, Alberto Milani, Guido Fratesi, Francesco Tumino, Nicola Manini, Giovanni Onida, Carlo S. Casari

Abstract: Graphdiynes (GDYs) represent a class of 2D carbon materials based on sp-sp$^2$ hybridization with appealing properties and potential applications. Recent advances have demonstrated the experimental self-assembly of GDYs on metal substrates. Here we focus on $α$- and $β$-GDYs on Au(111) and Pt(111), and investigate how their electronic and vibrational properties are affected by the interaction with… ▽ More Graphdiynes (GDYs) represent a class of 2D carbon materials based on sp-sp$^2$ hybridization with appealing properties and potential applications. Recent advances have demonstrated the experimental self-assembly of GDYs on metal substrates. Here we focus on $α$- and $β$-GDYs on Au(111) and Pt(111), and investigate how their electronic and vibrational properties are affected by the interaction with a metal substrate. We adopt hydrogenated GDY, previously characterized experimentally, as a benchmark for density functional theory simulations, that we apply to show that Au and Pt substrates impose a different degree of distortion on both $α$- and $β$-GDY. By comparing the adsorbed and the freestanding structures, we evaluate the effect of the surface interaction on the bandstructure and the simulated Raman spectra. Different charge transfers result in different energy shift of the Dirac cone in semi-metallic $α$-GDY and changes from semiconducting to metallic behavior for $β$-GDY. These changes in electronic properties are accompanied by characteristic frequency shifts and modifications of Raman active modes. Our results contribute in the understanding of the metal-interaction effects on GDYs and can open a route to the design of novel 2D materials with tailored properties. △ Less

Submitted 1 November, 2021; originally announced November 2021.

Journal ref: 2D Materials 8 (2021) 044014

In situ surface-enhanced Raman spectroscopy to investigate polyyne formation during pulsed laser ablation in liquid

Authors: Pietro Marabotti, Sonia Peggiani, Anna Facibeni, Patrick Serafini, Alberto Milani, Valeria Russo, Andrea Li Bassi, Carlo Spartaco Casari

Abstract: The synthesis of polyynes during their formation by pulsed laser ablation in liquid (i.e. acetonitrile) has been analyzed by in-situ surface-enhanced Raman spectroscopy (SERS). A polyethylene pellet, functionalized with silver nanoparticles and placed into the ablation medium, served as SERS active surface. This innovative approach granted the possibility to investigate the dynamics of formation a… ▽ More The synthesis of polyynes during their formation by pulsed laser ablation in liquid (i.e. acetonitrile) has been analyzed by in-situ surface-enhanced Raman spectroscopy (SERS). A polyethylene pellet, functionalized with silver nanoparticles and placed into the ablation medium, served as SERS active surface. This innovative approach granted the possibility to investigate the dynamics of formation and degradation of polyynes with a time-resolution of a few seconds, starting from the early stages of ablation when the concentration is low. The processes occurring during the synthesis have been studied comparing the in-situ SERS signal of polyynes and byproducts in the solution. The different kinetics of short and long polyynes have been investigated by their in-situ SERS signal, exploring the final distribution of chain lengths. Ex situ UV-Vis and high-performance liquid chromatography confirmed the observations gained from in-situ SERS data and validated this innovative in-situ and in-operando analysis. △ Less

Submitted 12 December, 2021; v1 submitted 26 October, 2021; originally announced October 2021.

Comments: 18 pages, 5 figures

Journal ref: Carbon 189, 219-229 (2022)

Vibrational and nonlinear optical properties of amine-capped push-pull polyynes by infrared and Raman spectroscopy

Authors: Pietro Marabotti, Alberto Milani, Andrea Lucotti, Luigi Brambilla, Matteo Tommasini, Chiara Castiglioni, Patrycja Męcik, Bartłomiej Pigulski, Sławomir Szafert, Carlo Spartaco Casari

Abstract: The vibrational properties of a series of push-pull polyynes have been studied by infrared and Raman spectroscopy. The simultaneous activation of a strong infrared and Raman mode, i.e. the collective vibration of CC bonds of the sp carbon chain, highlights the effectiveness of a polyyne bridge in promoting charge transfer between the electron donor (D) and acceptor (A) ends, thus suggesting that a… ▽ More The vibrational properties of a series of push-pull polyynes have been studied by infrared and Raman spectroscopy. The simultaneous activation of a strong infrared and Raman mode, i.e. the collective vibration of CC bonds of the sp carbon chain, highlights the effectiveness of a polyyne bridge in promoting charge transfer between the electron donor (D) and acceptor (A) ends, thus suggesting that ad-hoc functionalized polyynes are worth being explored as building blocks of organic materials with attractive first-order optical nonlinearity. The optical, electronic, and vibrational properties of these molecules have been investigated with the support of density functional theory calculations, as well as the electronic and vibrational first hyperpolarizabilities ($β$). The mid-low region of the IR spectra (800-1600 cm$^{-1}$) has been analyzed in detail, searching for marker bands of the specific terminations of the different sp carbon chains thus achieving a complete vibrational characterization of sp hybridized push-pull systems. △ Less

Submitted 24 September, 2021; v1 submitted 31 July, 2021; originally announced August 2021.

Comments: 25 pages, 7 figures

Journal ref: Carbon Trends Volume 5, 100115, 2021

Designing all graphdiyne materials as graphene derivatives: topologically driven modulation of electronic properties

Authors: Patrick Serafini, Alberto Milani, Davide M. Proserpio, Carlo S. Casari

Abstract: Designing new 2D systems with tunable properties is an important subject for science and technology. Starting from graphene, we developed an algorithm to systematically generate 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures and sp/sp2 carbon ratio. We analyze how structural and topological effects can tune the relative stability and the electronic… ▽ More Designing new 2D systems with tunable properties is an important subject for science and technology. Starting from graphene, we developed an algorithm to systematically generate 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures and sp/sp2 carbon ratio. We analyze how structural and topological effects can tune the relative stability and the electronic behavior, to propose a rationale for the development of new systems with tailored properties. A total of 26 structures have been generated, including the already known polymorphs such as α-, \b{eta}- and γ-GDY. Periodic density functional theory calculations have been employed to optimize the 2D crystal structures and to compute the total energy, the band structure, and the density of states. Relative energies with respect to graphene have been found to increase when the values of carbon sp/sp2 ratio increase, following however different trends based on the peculiar topologies present in the crystals. These topologies also influence the band structure giving rise to semiconductors with a finite bandgap, zero-gap semiconductors displaying Dirac cones, or metallic systems. The different trends allow identifying some topological effects as possible guidelines in the design of new 2D carbon materials beyond graphene. △ Less

Submitted 24 March, 2021; originally announced March 2021.

Topology-dependent conjugation effects in graphdiyne molecular fragments

Authors: Patrick Serafini, Alberto Milani, Matteo Tommasini, Carlo E. Bottani, Carlo S. Casari

Abstract: Graphdiynes (GDYs) as two-dimensional carbon structures based on sp2 hybridized aromatic rings connected by sp-hybridized acetylenic linear links are gathering an increasing popularity, both for their peculiar properties and for the promising applications. In these materials, structural features affect the degree of pi-electron conjugation resulting in different electronic, optical and vibrational… ▽ More Graphdiynes (GDYs) as two-dimensional carbon structures based on sp2 hybridized aromatic rings connected by sp-hybridized acetylenic linear links are gathering an increasing popularity, both for their peculiar properties and for the promising applications. In these materials, structural features affect the degree of pi-electron conjugation resulting in different electronic, optical and vibrational properties. In particular, how topology, connectivity between sp and sp2 domains and system size are related with the final properties is fundamental to understand structure-property relationships and to tailor the properties by proper structure design. By using a computational approach based on density functional theory calculations, we here investigate structure-property relations in a class of 1D and 2D GDY molecular fragments as building block models of extended structures. By analysing how the structure can modulate the pi-electron conjugation in these systems, HOMO-LUMO gap is found to depend on the peculiar topology and connections between linear sp domains and aromatic units. A topological indicator is computed, showing a trend with the gap and with the frequency of the main vibrational mode occurring in Raman spectra. Our findings can contribute to guide the molecular design of new GDY-based sp-sp2 carbon materials, aiming at tuning their properties by precise control of the structure. △ Less

Submitted 2 August, 2021; v1 submitted 9 January, 2021; originally announced January 2021.

Comments: 13 pages, 5 figures

Journal ref: Carbon 180, 265-273 (2021)

Structural, Electronic, and Vibrational Properties of 2D Graphdiyne-Like Carbon Nanonetwork Synthesized on Au(111): Implications for the Engineering of sp-sp2 Carbon Nanostructures

Authors: Andi Rabia, Francesco Tumino, Alberto Milani, Valeria Russo, Andrea Li Bassi, Nicolò Bassi, Andrea Lucotti, Simona Achilli, Guido Fratesi, Nicola Manini, Giovanni Onida, Qiang Sun, Wei Xu, Carlo S. Casari

Abstract: Graphdiyne, atomically-thin 2D carbon nanostructure based on sp-sp2 hybridization, is an appealing system potentially showing outstanding mechanical and optoelectronic properties. Surface-catalyzed coupling of halogenated sp-carbon-based molecular precursors represents a promising bottom-up strategy to fabricate extended 2D carbon systems with engineered structure on metallic substrates. Here, we… ▽ More Graphdiyne, atomically-thin 2D carbon nanostructure based on sp-sp2 hybridization, is an appealing system potentially showing outstanding mechanical and optoelectronic properties. Surface-catalyzed coupling of halogenated sp-carbon-based molecular precursors represents a promising bottom-up strategy to fabricate extended 2D carbon systems with engineered structure on metallic substrates. Here, we investigate the atomic-scale structure and electronic and vibrational properties of an extended graphdiyne-like sp-sp2 carbon nanonetwork grown on Au(111) by means of on-surface synthesis. The formation of such 2D nanonetwork at its different stages as a function of the annealing temperature after the deposition is monitored by scanning tunneling microscopy (STM), Raman spectroscopy and combined with density functional theory (DFT) calculations. High-resolution STM imaging and the high sensitivity of Raman spectroscopy to the bond nature provide a unique strategy to unravel the atomic-scale properties of sp-sp2 carbon nanostructures. We show that hybridization between the 2D carbon nanonetwork and the underlying substrate states strongly affects its electronic and vibrational properties, modifying substantially the density of states and the Raman spectrum compared to the free standing system. This opens the way to the modulation of the electronic properties with significant prospects in future applications as active nanomaterials for catalysis, photoconversion and carbon-based nanoelectronics. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Journal ref: ACS Appl. Nano Mater. 3, 2178-12187 (2020)

Solvent-dependent termination, size and stability in polyynes synthesis by laser ablation in liquids

Authors: Sonia Peggiani, Pietro Marabotti, Riccardo Alberto Lotti, Anna Facibeni, Patrick Serafini, Alberto Milani, Valeria Russo, Andrea Li Bassi, Carlo Spartaco Casari

Abstract: In recent years there has been a growing interest in sp-carbon chains as possible novel nanostructures. An example of sp-carbon chains are the so-called polyynes, characterized by the alternation of single and triple bonds that can be synthesized by pulsed laser ablation in liquid (PLAL) of a graphite target. In this work, by exploiting different solvents in the PLAL process, e.g. water, acetonitr… ▽ More In recent years there has been a growing interest in sp-carbon chains as possible novel nanostructures. An example of sp-carbon chains are the so-called polyynes, characterized by the alternation of single and triple bonds that can be synthesized by pulsed laser ablation in liquid (PLAL) of a graphite target. In this work, by exploiting different solvents in the PLAL process, e.g. water, acetonitrile, methanol, ethanol, and isopropanol, we systematically investigate the solvent role in polyyne formation and stability. The presence of methyland cyano-groups in the solutions influences the termination of polyynes, allowing to detect, in addition to hydrogen-capped polyynes up to HC22H, methyl-capped polyynes up to 18 carbon atoms (i.e. HCnCH3) and cyanopolyynes up to HC12CN. The assignment of each species was done by UV-Vis spectroscopy and supported by density functional theory simulations of vibronic spectra. In addition, surface-enhanced Raman spectroscopy allowed to observe differences, due to different terminations (hydrogen, methyl-and cyano group), in the shape and positions of the characteristic Raman bands of the size-selected polyynes. The evolution in time of each polyyne has been investigated evaluating the chromatographic peak area, and the effect of size, terminations and solvents on polyynes stability has been individuated. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 13 pages, 5 figures. Supporting Information of this article is available in the end of this manuscript

In situ synthesis of polyynes in a polymer matrix by pulsed laser ablation in liquid

Authors: Sonia Peggiani, Anna Facibeni, Alberto Milani, Chiara Castiglioni, Valeria Russo, Andrea Li Bassi, Carlo S. Casari

Abstract: Polyynes are finite chains formed by sp-hybridized carbon atoms with alternating single and triple bonds and displaying intriguing electronic and optical properties. Pulsed laser ablation in liquid (PLAL) is a well assessed technique for the physical synthesis of hydrogen-capped polyynes in solution, however, their limited stability prevents further exploitation in materials for different applicat… ▽ More Polyynes are finite chains formed by sp-hybridized carbon atoms with alternating single and triple bonds and displaying intriguing electronic and optical properties. Pulsed laser ablation in liquid (PLAL) is a well assessed technique for the physical synthesis of hydrogen-capped polyynes in solution, however, their limited stability prevents further exploitation in materials for different applications. In this work, polyynes in poly(vinyl alcohol) (PVA) were produced in a single-step PLAL process by ablating graphite directly in aqueous solution of PVA, investigating the role of polymer concentration. The presence of PVA solution, as a participating medium for PLAL, is shown to favour the formation of polyynes. The addition of Ag colloids to the aqueous PVA/polyynes solution allowed surface-enhanced Raman spectroscopy (SERS) measurements, carried out both on liquid samples and on free-standing nanocomposites, obtained after solvent evaporation. We show that polyynes in the nanocomposite remain stable at least for 11 months, whereas the corresponding PVA/Ag/polyynes solution displayed a strong polyyne reduction already after 3 weeks. These results open the view to further characterizations of the properties of polyyne-based films and materials. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Journal ref: RSC Materials Advances 1, 2729 (2020)

Raman and IR spectra of graphdiyne nanoribbons

Authors: Patrick Serafini, Alberto Milani, Matteo Tommasini, Chiara Castiglioni, Carlo S. Casari

Abstract: γ-graphdiyne is a 2D carbon structure beyond graphene: it is formed by sp and sp2 carbon atoms organized as hexagonal rings connected by linear links, and it is predicted to be a semiconductor. The lateral confinement of γ-graphdiyne nanoribbons significantly affects the electronic and vibrational properties. By means of periodic Density Functional Theory (DFT) calculations we investigate here the… ▽ More γ-graphdiyne is a 2D carbon structure beyond graphene: it is formed by sp and sp2 carbon atoms organized as hexagonal rings connected by linear links, and it is predicted to be a semiconductor. The lateral confinement of γ-graphdiyne nanoribbons significantly affects the electronic and vibrational properties. By means of periodic Density Functional Theory (DFT) calculations we investigate here the electronic band structure, the Raman and IR spectra of the γ-graphdiyne 2D crystal and related nanoribbons. We discuss the effect of the functional and basis set on the evaluation of the band gap, highlighting the reliability of hybrid functionals. By joining DFT calculations with a symmetry analysis, we assign in detail the IR and Raman spectra of γ-graphdiyne. On this basis we show the modulation of the gap in nanoribbons of increasing width and different edges (armchair, zigzag). We assess how confinement affects the Raman and IR spectra of such nanoribbons by comparing their vibrational modes with the phonons of the parent 2D crystal. Our symmetry-based classification allows identifying the marker bands sensitive to the edge structure and lateral confinement of nanoribbons of increasing width. These results show the effectiveness of vibrational spectroscopy for the characterization of such nanostructures. △ Less

Submitted 7 January, 2020; v1 submitted 18 November, 2019; originally announced November 2019.

Comments: The research leading to these results has received funding from the European Research Council Consolidator Grant EspLORE (ERC-2016-CoG Grant No.724610)

Journal ref: Phys. Rev. Materials 4, 014001 (2020)

Size-selected polyynes synthesized by submerged arc discharge in water

Authors: Sonia Peggiani, Andrea Senis, Anna Facibeni, Alberto Milani, Patrick Serafini, Gianmarco Cerrato, Andrea Lucotti, Matteo Tommasini, Daniele Fazzi, Chiara Castiglioni, Valeria Russo, Andrea Li Bassi, Carlo S. Casari

Abstract: Polyynes are linear sp-carbon chains of finite length consisting in a sequence of alternated single and triple bonds and displaying appealing optical and electronic properties. A simple, low cost and scalable production technique for polyynes is the submerged arc discharge (SAD) in liquid, which so far, has been mainly exploited in organic solvents. In this work, we investigated in detail SAD in w… ▽ More Polyynes are linear sp-carbon chains of finite length consisting in a sequence of alternated single and triple bonds and displaying appealing optical and electronic properties. A simple, low cost and scalable production technique for polyynes is the submerged arc discharge (SAD) in liquid, which so far, has been mainly exploited in organic solvents. In this work, we investigated in detail SAD in water as a cheap and non-toxic solvent for the production of polyynes. The role of process parameters such as current (10-25 A) and voltage (20-25 V) in the production yield have been investigated, as well as polyynes stability. Polyynes terminated by hydrogen (CnH2: n=6-16) were identified by High-Performance Liquid Chromatography (HPLC) coupled with UV-Visible absorption spectroscopy and with the support of density functional theory (DFT) calculations. Size-selected polyynes separated by HPLC were analyzed by surface enhanced Raman spectroscopy (SERS). The formation process was monitored by in situ SERS using an immersed fiber-optic Raman probe and employing Ag nanoparticles directly produced in the solution by SAD. △ Less

Submitted 27 December, 2019; v1 submitted 17 September, 2019; originally announced September 2019.

Journal ref: Chemical Physics Letters 740 (2020) 137054

Synthesis And Characterization Of Polyynes End-Capped By Biphenyl Groups ({\Alpha},Ω-Biphenylpolyynes)

Authors: Franco Cataldo, Ornella Ursini, Alberto Milani, Carlo S. Casari

Abstract: Stable polyyne chains terminated with biphenyl end groups (a,u-biphenylpolyynes) were synthesized in a single step through a simple procedure by using the Cadiot-Chodkiewicz reaction conditions. The a,ubiphenylpolyynes were separated through HPLC analysis and identified by means of their electronic absorption spectra. The a,u-biphenylpolyynes were studied by FT-IR and Raman spectroscopy and the sp… ▽ More Stable polyyne chains terminated with biphenyl end groups (a,u-biphenylpolyynes) were synthesized in a single step through a simple procedure by using the Cadiot-Chodkiewicz reaction conditions. The a,ubiphenylpolyynes were separated through HPLC analysis and identified by means of their electronic absorption spectra. The a,u-biphenylpolyynes were studied by FT-IR and Raman spectroscopy and the spectral interpretation was supported with DFT calculations. A peculiarly low reactivity of a,u-biphenylpolyynes with ozone was observed. △ Less

Submitted 18 March, 2018; v1 submitted 9 March, 2018; originally announced March 2018.

Comments: The research leading to these results has received funding from the European Research Council Consolidator Grant EspLORE (ERC-2016-CoG Grant No.724610)

Journal ref: Carbon volume:126 pages:232-240 (2018)

Carbyne: from the elusive allotrope to stable carbon atom wires

Authors: Carlo S. Casari, Alberto Milani

Abstract: Besides graphite and diamond, the solid allotropes of carbon in sp2 and sp3 hybridization, the possible existence of a third allotrope based on the sp-carbon linear chain, the Carbyne, has stimulated researchers for a long time. The advent of fullerenes, nanotubes and graphene has opened new opportunities and nurtured the interest in novel carbon allotropes including linear structures. The efforts… ▽ More Besides graphite and diamond, the solid allotropes of carbon in sp2 and sp3 hybridization, the possible existence of a third allotrope based on the sp-carbon linear chain, the Carbyne, has stimulated researchers for a long time. The advent of fullerenes, nanotubes and graphene has opened new opportunities and nurtured the interest in novel carbon allotropes including linear structures. The efforts made in this direction produced a number of interesting sp-hybridized carbon molecules and nanostructures in the form of carbon-atom wires. We here discuss some of the new perspectives opened by the recent advancements in the research on sp-carbon systems. △ Less

Submitted 19 April, 2018; v1 submitted 23 January, 2018; originally announced January 2018.

Comments: 9 figures, 1 table

Journal ref: MRS Communications (2018), 1 of 13 \c{opyright} Materials Research Society, 2018

Semiconductor-to-metal transition in carbon-atom wires driven by sp2 conjugated endgroups

Authors: Alberto Milani, Matteo Tommasini, Valentino Barbieri, Andrea Lucotti, Valeria Russo, Franco Cataldo, Carlo S. Casari

Abstract: Novel bis(biphenyl)-capped polyynes have been synthesized to investigate the modulation of the electronic and optical properties of sp-hybridized carbon-atom wires (CAWs) capped with π-conjugated $sp^{2}$ endgroups. Raman and Surface Enhanced Raman spectroscopy (SERS) investigation of these systems and Density Functional Theory (DFT) calculations reveal structural changes from polyyne-like with al… ▽ More Novel bis(biphenyl)-capped polyynes have been synthesized to investigate the modulation of the electronic and optical properties of sp-hybridized carbon-atom wires (CAWs) capped with π-conjugated $sp^{2}$ endgroups. Raman and Surface Enhanced Raman spectroscopy (SERS) investigation of these systems and Density Functional Theory (DFT) calculations reveal structural changes from polyyne-like with alternating single-triple bonds towards cumulene-like with more equalized bonds as a consequence of the charge transfer occurring when wires interact with metallic nanoparticles. While polyynes have semiconducting electronic properties, a more equalized system tends to a cumulene-like structure characterized by a nearly metallic behavior. The possibility to drive a semiconductor-to-metal transition has been investigated by systematic DFT calculations on a series of CAWs capped with different conjugated endgroups revealing that the modulation of the structural, electronic and vibrational properties of the sp-carbon chain towards the metallic wire cannot be simply obtained by using extended π-conjugated $sp^{2}$ carbon endgroups, but require a suitable chemical design of the endgroup and control of charge transfer. These results provide useful guidelines for the design of novel $sp-sp^2$ hybrid carbon nanosystems with tunable properties, where graphene-like and polyyne-like domains are closely interconnected. The capability to tune the final electronic or optical response of the material makes these hybrid $sp-sp^2$ systems appealing for a future all-carbon-based science and technology. △ Less

Submitted 20 December, 2016; originally announced December 2016.

Comments: 23 pages, 6 figures

Journal ref: J. Phys. Chem. C 121, 10562, (2017)

Carbon-atom wires produced by nanosecond pulsed laser deposition in a background gas

Authors: C. S. Casari, C. S. Giannuzzi, V. Russo

Abstract: Wires of sp-hybridized carbon atoms are attracting interest for both fundamental aspects of carbon science and for their appealing functional properties. The synthesis by physical vapor deposition has been reported to provide sp-rich carbon films but still needs to be further developed and understood in detail. Here the synthesis of carbon-atom wires (CAWs) has been achieved by nanosecond pulsed l… ▽ More Wires of sp-hybridized carbon atoms are attracting interest for both fundamental aspects of carbon science and for their appealing functional properties. The synthesis by physical vapor deposition has been reported to provide sp-rich carbon films but still needs to be further developed and understood in detail. Here the synthesis of carbon-atom wires (CAWs) has been achieved by nanosecond pulsed laser deposition (PLD) expoliting the strong out-of-equilibrium conditions occurring when the ablation plasma is confined in a background gas. Surface Enhnaced Raman scattering (SERS) spectra of deposited films indicates that CAWs are mixed with a mainly $sp^2$ amorphous carbon in a $sp-sp^2$ hybrid material. Optimal conditions for the deposition of sp-carbon phase have been investigated by changing deposition parameters thus suggesting basic mechanisms of carbon wires formation. Our proof-of-concept may open new perspectives for the targeted fabrication of CAWs and $sp-sp^2$ structures. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 15 pages 4 figures

Journal ref: Carbon 104 (2016) 190-195

Controlling the Electrical Properties of Undoped and Ta-doped TiO2 Polycrystalline Films via Ultra-Fast Annealing Treatments

Authors: Piero Mazzolini, Tolga Acartürk, Daniel Chrastina, Ulrich Starke, Carlo S. Casari, Giuliano Gregori, Andrea Li Bassi

Abstract: We present a study on the crystallization process of undoped and Ta doped TiO2 amorphous thin films. In particular, the effect of ultra-fast annealing treatments in environments characterized by different oxygen concentrations is investigated via in-situ resistance measurements. The accurate examination of the key parameters involved in this process allows us to reduce the time needed to obtain hi… ▽ More We present a study on the crystallization process of undoped and Ta doped TiO2 amorphous thin films. In particular, the effect of ultra-fast annealing treatments in environments characterized by different oxygen concentrations is investigated via in-situ resistance measurements. The accurate examination of the key parameters involved in this process allows us to reduce the time needed to obtain highly conducting and transparent polycrystalline thin films (resistivity about $6 \times 10^{-4}$ Ωcm, mean transmittance in the visible range about $81\%$) to just 5 minutes (with respect to the 180 minutes required for a standard vacuum annealing treatment) in nitrogen atmosphere (20 ppm oxygen concentration) at ambient pressure. Experimental evidence of superficial oxygen incorporation in the thin films and its detrimental role for the conductivity are obtained by employing different concentrations of traceable 18O isotopes during ultra-fast annealing treatments. The results are discussed in view of the possible implementation of the ultra-fast annealing process for TiO2-based transparent conducting oxides as well as electron selective layers in solar cell devices; taking advantage of the high control of the ultra-fast crystallization processes which has been achieved, these two functional layers are shown to be obtainable from the crystallization of a single homogeneous thin film. △ Less

Submitted 9 September, 2015; originally announced September 2015.

Comments: 30 pages (including Supporting Information and graphical TOC), 4 figures

Journal ref: Adv. Electron. Mater. 2016, 1500316

Two-dimensional TiOx nanostructures on Au(111): a Scanning Tunneling Microscopy and Spectroscopy investigation

Authors: F. Tumino, P. Carrozzo, L. Mascaretti, C. S. Casari, M. Passoni, S. Tosoni, C. E. Bottani, A. Li Bassi

Abstract: We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases we… ▽ More We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases were identified: the \emph{honeycomb} and \emph{pinwheel} phases appear as monolayer films wetting the gold surface, while nanocrystallites of the \emph{triangular}, \emph{row} and \emph{needle} phases grow mainly over the honeycomb or pinwheel layers. Density Functional Theory (DFT) investigation of the honeycomb structure supports a $(2\times 2)$ structural model based on a Ti-O bilayer having $\text{Ti}_2\text{O}_3$ stoichiometry. The pinwheel phase was observed to evolve, for increasing coverage, from single triangular crystallites to a well-ordered film forming a $(4\sqrt{7}\times 4\sqrt{7})R19.1^\circ$ superstructure, which can be interpreted within a moirÃ\c{opyright}-like model. Structural characteristics of the other three phases were disclosed from the analysis of high-resolution STM measurements. STS measurements revealed a partial metallization of honeycomb and pinwheel and a semiconducting character of row and triangular phases. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: 13 pages, 10 figures

Journal ref: 2D Materials 2 (2015) 045011

Morphology-driven electrical and optical properties in graded hierarchical transparent conducting Al:ZnO

Authors: P. Gondoni, P. Mazzolini, A. M. Pillado Pérez, V. Russo, A. Li Bassi, C. S. Casari

Abstract: Graded Al-doped ZnO layers, constituted by a mesoporous forest like system evolving into a compact transparent conductor, were synthesized by Pulsed Laser Deposition with different morphology to study the correlation with functional properties. Morphology was monitored by measuring the resulting surface roughness and its effects on electrical conductivity (especially carrier mobility, which signif… ▽ More Graded Al-doped ZnO layers, constituted by a mesoporous forest like system evolving into a compact transparent conductor, were synthesized by Pulsed Laser Deposition with different morphology to study the correlation with functional properties. Morphology was monitored by measuring the resulting surface roughness and its effects on electrical conductivity (especially carrier mobility, which significantly decreases with increasing roughness) allow to discuss the limitations in conduction mechanisms. Significant changes in light scattering capability due to variations in morphology are also investigated and discussed to study the correlation between morphology and functional properties. △ Less

Submitted 10 February, 2014; originally announced February 2014.

Comments: 11 pages, 4 figures

Multi-wavelength Raman scattering of nanostructured Al-doped zinc oxide

Authors: V. Russo, M. Ghidelli, P. Gondoni, C. S. Casari, A. Li Bassi

Abstract: In this work we present a detailed Raman scattering investigation of zinc oxide and aluminum-doped zinc oxide (AZO) films characterized by a variety of nanoscale structure and morphology and synthesized by pulsed laser deposition (PLD) under different oxygen pressure conditions. The comparison of Raman data for pure ZnO and AZO films with similar morphology at the nano/mesoscale allows to investig… ▽ More In this work we present a detailed Raman scattering investigation of zinc oxide and aluminum-doped zinc oxide (AZO) films characterized by a variety of nanoscale structure and morphology and synthesized by pulsed laser deposition (PLD) under different oxygen pressure conditions. The comparison of Raman data for pure ZnO and AZO films with similar morphology at the nano/mesoscale allows to investigate the relation between Raman features (peak or band positions, width, relative intensity) and material properties such as local structural order, stoichiometry and doping. Moreover Raman measurements with three different excitation lines (532, 457 and 325 nm) point out a strong correlation between vibrational and electronic properties. This observation confirms the relevance of a multi-wavelength Raman investigation to obtain a complete structural characterization of advanced doped oxide materials. △ Less

Submitted 27 November, 2013; originally announced November 2013.

Comments: 27 pages, 7 figures, submitted to the Journal of Applied Physics

Journal ref: Journal of Applied Physics 115, 073508 (2014)

Enhancing Light Harvesting by Hierarchical Functionally Graded Transparent Conducting Al-doped ZnO Nano- and Mesoarchitectures

Authors: Paolo Gondoni, Piero Mazzolini, Valeria Russo, Annamaria Petrozza, Avanish K. Srivastava, Andrea Li Bassi, Carlo S. Casari

Abstract: A functionally graded Al-doped ZnO structure is presented which combines conductivity, visible transparency and light scattering with mechanical flexibility. The nano and meso-architecture, constituted by a hierarchical, large surface area, mesoporous tree-like structure evolving in a compact layer, is synthesized at room temperature and is fully compatible with plastic substrates. Light trapping… ▽ More A functionally graded Al-doped ZnO structure is presented which combines conductivity, visible transparency and light scattering with mechanical flexibility. The nano and meso-architecture, constituted by a hierarchical, large surface area, mesoporous tree-like structure evolving in a compact layer, is synthesized at room temperature and is fully compatible with plastic substrates. Light trapping capability is demonstrated by showing up to 100% improvement of light absorption of a low bandgap polymer employed as the active layer. △ Less

Submitted 27 November, 2013; originally announced November 2013.

Comments: 21 pages, 6 figures, submitted to Solar Energy Materials and Solar Cells

Journal ref: Solar Energy Materials & Solar Cells 128, 248-253 (2014)

Structure-dependent optical and electrical transport properties of nanostructured Al-doped ZnO

Authors: P. Gondoni, M. Ghidelli, F. Di Fonzo, M. Carminati, V. Russo, A. Li Bassi, C. S. Casari

Abstract: The structure-property relation of nanostructured Al-doped ZnO thin films has been investigated in detail through a systematic variation of structure and morphology, with particular emphasis on how they affect optical and electrical properties. A variety of structures, ranging from compact polycristalline films to mesoporous, hierarchically organized cluster assemblies, are grown by Pulsed Laser D… ▽ More The structure-property relation of nanostructured Al-doped ZnO thin films has been investigated in detail through a systematic variation of structure and morphology, with particular emphasis on how they affect optical and electrical properties. A variety of structures, ranging from compact polycristalline films to mesoporous, hierarchically organized cluster assemblies, are grown by Pulsed Laser Deposition at room temperature at different oxygen pressures. We investigate the dependence of functional properties on structure and morphology and show how the correlation between electrical and optical properties can be studied to evaluate energy gap, conduction band effective mass and transport mechanisms. Understanding these properties opens the way for specific applications in photovoltaic devices, where optimized combinations of conductivity, transparency and light scattering are required. △ Less

Submitted 15 May, 2012; originally announced May 2012.

Comments: 8 pages, 9 figures

Journal ref: Nanotechnology 23, 365706 (2012)

Direct observation of the basic mechanisms of Pd island nucleation on Au(111)

Authors: C. S. Casari, S. Foglio, F. Siviero, A. Li Bassi, M. Passoni, C. E. Bottani

Abstract: The formation mechanisms of evaporated Pd islands on the reconstructed Au(111) $22 /times /sqrt{3}$ herringbone surface have been here studied by Scanning Tunneling Microscopy (STM) at room temperature. Atomically resolved STM images at the very early stages of growth provide a direct observation of the mechanisms involved in preferential Pd islands nucleation at the elbows of the herringbone st… ▽ More The formation mechanisms of evaporated Pd islands on the reconstructed Au(111) $22 /times /sqrt{3}$ herringbone surface have been here studied by Scanning Tunneling Microscopy (STM) at room temperature. Atomically resolved STM images at the very early stages of growth provide a direct observation of the mechanisms involved in preferential Pd islands nucleation at the elbows of the herringbone structure. At low Pd coverage the Au(111) herringbone structure remains substantially unperturbed and isolated Pd atoms settled in hollow sites between Au atoms are found nearby the elbows and the distortions of the reconstructed surface. In the same regions, at extremely low coverage (0.003 ML), substituted Pd atoms in lattice sites of the Au(111) surface are also observed, revealing the occurrence of a place exchange mechanism. Substitution seems to play a fundamental role in the nucleation process, forming aggregation centers for incoming atoms and thus leading to the ordered growth of Pd islands on Au(111). Atomically resolved STM images of Pd islands reveal a close-packed arrangement with lattice parameter close to the interatomic distance between gold atoms in the fcc regions of the Au(111) surface. Distortion of the herringbone structure for Pd coverages higher than 0.25 ML indicates strong interaction between the growing islands and the topmost Au(111) layer. △ Less

Submitted 22 September, 2009; v1 submitted 19 November, 2008; originally announced November 2008.

Comments: 25 pages, 10 figures

Journal ref: PHYSICAL REVIEW B 79, 195402 (2009)

Hierarchically organized nanostructured TiO2 for photocatalysis applications

Authors: F. Di Fonzo, C. S. Casari, V. Russo, M. F. Brunella, A. Li Bassi, C. E. Bottani

Abstract: A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of TiO2 microstructures is demonstrated, going from classical compact/columnar films to a dense forest of distinct hierarchical assemblies of ultrafine nanoparticl… ▽ More A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of TiO2 microstructures is demonstrated, going from classical compact/columnar films to a dense forest of distinct hierarchical assemblies of ultrafine nanoparticles (<10 nm), up to a more disordered, aerogel-type structure. Correspondingly, film density varies with respect to bulk TiO2 anatase, with a degree of porosity going from 48% to over 90%. These structures are stable with respect to heat treatment at 400 centigrade degrees, which results in crystalline ordering but not in morphological changes down to the nanoscale. Both as deposited and annealed films exhibit very promising photocatalytic properties, even superior to standard Degussa P25 powder, as demonstrated by the degradation of stearic acid as a model molecule. The observed kinetics are correlated to the peculiar morphology of the PLD grown material. We show that the 3D multi-scale hierarchical morphology enhances reaction kinetics and creates an ideal environment for mass transport and photon absorption, maximizing the surface area-to-volume ratio while at the same time providing readily accessible porosity through the large inter-tree spaces that act as distributing channels. The reported strategy provides a versatile technique to fabricate high aspect ratio 3D titania microstuctures through a hierarchical assembly of ultrafine nanoparticles. Beyond photocatalytic and catalytic applications, this kind of material could be of interest for those applications where high surface-to-volume and efficient mass transport are required at the same time. △ Less

Submitted 4 November, 2008; originally announced November 2008.

Comments: 10 pages, 7 figures, Nanotechnology (accepted)

Journal ref: Nanotechnology 20, 015604 (2009)

Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by Dip Pen Nanolithography

Authors: Andrea Baserga, Marco Vigano', Carlo S. Casari, Stefano Turri, Andrea Li Bassi, Marinella Levi, Carlo E. Bottani

Abstract: We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-i… ▽ More We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-instrument and multi-technique local detection and analysis. Moreover the smooth surface of the Au squares (abput 5-10 angstrom roughness) allows to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label free detection methods for DNA nanoarrays based on the use of scanning probes. △ Less

Submitted 15 September, 2008; originally announced September 2008.

Comments: Langmuir (accepted)

Journal ref: Langmuir 24, 13212-13217 (2008)

Investigation of sp carbon chain interaction with silver nanoparticles by Surface Enhanced Raman Scattering

Authors: A. Lucotti, C. S. Casari, M. Tommasini, A. Li Bassi, D. Fazzi, V. Russo, M. Del Zoppo, C. Castiglioni, F. Cataldo, C. E. Bottani, G. Zerbi

Abstract: Surface Enhanced Raman Spectroscopy (SERS) is exploited here to investigate the interaction of isolated sp carbon chains (polyynes) in a methanol solution with silver nanoparticles. Hydrogen-terminated polyynes show a strong interaction with silver colloids used as the SERS active medium revealing a chemical SERS effect. SERS spectra after mixing polyynes with silver colloids show a noticeable t… ▽ More Surface Enhanced Raman Spectroscopy (SERS) is exploited here to investigate the interaction of isolated sp carbon chains (polyynes) in a methanol solution with silver nanoparticles. Hydrogen-terminated polyynes show a strong interaction with silver colloids used as the SERS active medium revealing a chemical SERS effect. SERS spectra after mixing polyynes with silver colloids show a noticeable time evolution. Experimental results, supported by density functional theory (DFT) calculations of the Raman modes, allow us to investigate the behavior and stability of polyynes of different lengths and the overall sp conversion towards sp2 phase. △ Less

Submitted 22 September, 2009; v1 submitted 28 March, 2008; originally announced March 2008.

Comments: 19 pages, 7 figures, 1 tables

Journal ref: Chemical Physics Letters 478 (2009) 45-50

Low-frequency modes in the Raman spectrum of sp-sp2 nanostructured carbon

Authors: C. S. Casari, A. Li Bassi, A. Baserga, L. Ravagnan, P. Piseri, C. Lenardi, M. Tommasini, A. Milani, D. Fazzi, C. E. Bottani, P. Milani

Abstract: A novel form of amorphous carbon with sp-sp2 hybridization has been recently produced by supersonic cluster beam deposition showing the presence in the film of both polyynic and cumulenic species [L. Ravagnan et al. Phys. Rev. Lett. 98, 216103 (2007)]. Here we present a in situ Raman characterization of the low frequency vibrational region (400-800 cm-1) of sp-sp2 films at different temperatures… ▽ More A novel form of amorphous carbon with sp-sp2 hybridization has been recently produced by supersonic cluster beam deposition showing the presence in the film of both polyynic and cumulenic species [L. Ravagnan et al. Phys. Rev. Lett. 98, 216103 (2007)]. Here we present a in situ Raman characterization of the low frequency vibrational region (400-800 cm-1) of sp-sp2 films at different temperatures. We report the presence of two peaks at 450 cm-1 and 720 cm-1. The lower frequency peak shows an evolution with the variation of the sp content and it can be attributed, with the support of density functional theory (DFT) simulations, to bending modes of sp linear structures. The peak at 720 cm-1 does not vary with the sp content and it can be attributed to a feature in the vibrational density of states activated by the disorder of the sp2 phase. △ Less

Submitted 27 March, 2008; originally announced March 2008.

Comments: 15 pages, 5 figures, 1 table

Journal ref: PHYSICAL REVIEW B 77, 195444 (2008)

Bulk Cr tips for scanning tunneling microscopy and spin-polarized scanning tunneling microscopy

Authors: A. Li Bassi, C. S. Casari, D. Cattaneo, F. Donati, S. Foglio, M. Passoni, C. E. Bottani, P. Biagioni, A. Brambilla, M. Finazzi, F. Ciccacci, L. Duo'

Abstract: A simple, reliable method for preparation of bulk Cr tips for Scanning Tunneling Microscopy (STM) is proposed and its potentialities in performing high-quality and high-resolution STM and Spin Polarized-STM (SP-STM) are investigated. Cr tips show atomic resolution on ordered surfaces. Contrary to what happens with conventional W tips, rest atoms of the Si(111)-7x7 reconstruction can be routinely… ▽ More A simple, reliable method for preparation of bulk Cr tips for Scanning Tunneling Microscopy (STM) is proposed and its potentialities in performing high-quality and high-resolution STM and Spin Polarized-STM (SP-STM) are investigated. Cr tips show atomic resolution on ordered surfaces. Contrary to what happens with conventional W tips, rest atoms of the Si(111)-7x7 reconstruction can be routinely observed, probably due to a different electronic structure of the tip apex. SP-STM measurements of the Cr(001) surface showing magnetic contrast are reported. Our results reveal that the peculiar properties of these tips can be suited in a number of STM experimental situations. △ Less

Submitted 29 October, 2007; v1 submitted 17 September, 2007; originally announced September 2007.

Journal ref: Applied Physics Letters 91, 173120 (2007)

Influence of cumulenic chains on the vibrational and electronic properties of sp/sp2 amorphous carbon

Authors: L. Ravagnan, P. Piseri, M. Bruzzi, S. Miglio, G. Bongiorno, A. Baserga, C. S. Casari, A. Li Bassi, C. Lenardi, Y. Yamaguchi, T. Wakabayashi, C. E. Bottani, P. Milani

Abstract: We report the production and characterization of a form of amorphous carbon films with sp/sp2 hybridization (atomic fraction of sp hybridized species > 20%) where the predominant sp bonding appears to be (=C=C=)n cumulene. Vibrational and electronic properties have been studied by in situ Raman spectroscopy and electrical conductivity measurements. Cumulenic chains are substantially stable for t… ▽ More We report the production and characterization of a form of amorphous carbon films with sp/sp2 hybridization (atomic fraction of sp hybridized species > 20%) where the predominant sp bonding appears to be (=C=C=)n cumulene. Vibrational and electronic properties have been studied by in situ Raman spectroscopy and electrical conductivity measurements. Cumulenic chains are substantially stable for temperatures lower than 250 K and they influence the electrical transport properties of the sp/sp2 carbon through a self-doping mechanism by pinning the Fermi level closer to one of the mobility gap edges. Upon heating above 250 K the cumulenic species decay to form graphitic nanodomains embedded in the sp2 amorphous matrix thus reducing the activation energy of the material. This is the first example of a pure carbon system where the sp hybridization influences bulk properties. △ Less

Submitted 27 March, 2007; originally announced March 2007.

Comments: 14 pages, 3 figures

Journal ref: Physical Review Letters 98, 216103 (2007)

Different W cluster deposition regimes in pulsed laser ablation observed by in situ Scanning Tunneling Microscopy

Authors: D. Cattaneo, S. Foglio, C. S. Casari, A. Li Bassi, M. Passoni, C. E. Bottani

Abstract: We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster… ▽ More We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster deposition-diffusion-aggregation (DDA), cluster melting and coalescence and cluster implantation were observed, depending on background gas pressure and target-to-substrate distance which influence the kinetic energy of the ablated species. These parameters can thus be easily employed for surface modification by cluster bombardment, deposition of supported clusters and growth of films with different morphologies. The variation in cluster mobility on different substrates and its influence on aggregation and growth mechanisms has also been investigated. △ Less

Submitted 20 February, 2007; originally announced February 2007.

Comments: 12 pages (3 figures); Surface Science (accepted)

Journal ref: Surface Science 601, 1892-1897 (2007)

Stabilization of linear carbon structures in a solid Ag nanoparticle assembly

Authors: C. S. Casari, V. Russo, A. Li Bassi, C. E. Bottani, F. Cataldo, A. Lucotti, M. Tommasini, M. Del Zoppo, C. Castiglioni, G. Zerbi

Abstract: Linear sp carbon nanostructures are gathering interest for the physical properties of one-dimensional (1D) systems. At present, the main obstacle to the synthesis and study of these systems is their instability. Here we present a simple method to obtain a solid system where linear sp chains (i.e. polyynes) in a silver nanoparticle assembly display a long term stability at ambient conditions. The… ▽ More Linear sp carbon nanostructures are gathering interest for the physical properties of one-dimensional (1D) systems. At present, the main obstacle to the synthesis and study of these systems is their instability. Here we present a simple method to obtain a solid system where linear sp chains (i.e. polyynes) in a silver nanoparticle assembly display a long term stability at ambient conditions. The presence and the behavior of linear carbon is investigated by Surface Enhanced Raman Scattering (SERS) exploiting the plasmon resonance of the silver nanoparticles assembly. This model system opens the possibility to investigate an intriguing form of carbon nanostructures. △ Less

Submitted 3 October, 2006; originally announced October 2006.

Journal ref: Applied Physics Letters 90, 13111 (2007); Virtual Journal of Nanoscale Science and Technology (22 gennaio, 2007)

Leaving the Fullerene Road: Presence and Stability of sp Chains in sp2 Carbon Clusters and Cluster-Assembled Solids

Authors: M. Bogana, L. Ravagnan, C. S. Casari, A. Zivelonghi, A. Baserga, A. Li Bassi, C. E. Bottani, S. Vinati, E. Salis, P. Piseri, E. Barborini, L. Colombo, P. Milani

Abstract: We report the experimental and theoretical investigation of the growth and of the structure of large carbon clusters produced in a supersonic expansion by a pulsed microplasma source. The absence of a significant thermal annealing during the cluster growth causes the formation of disordered structures where sp2 and sp hybridizations coexist for particles larger than roughly 90 atoms. Among diffe… ▽ More We report the experimental and theoretical investigation of the growth and of the structure of large carbon clusters produced in a supersonic expansion by a pulsed microplasma source. The absence of a significant thermal annealing during the cluster growth causes the formation of disordered structures where sp2 and sp hybridizations coexist for particles larger than roughly 90 atoms. Among different structures we recognize sp2 closed networks encaging sp chains. This "nutshell" configuration can prevent the fragmentation of sp species upon deposition of the clusters thus allowing the formation of nanostructured films containing carbynoid species, as shown by Raman spectroscopy. Atomistic simulations confirm that the observed Raman spectra are the signature of the sp/sp2 hybridization characteristic of the isolated clusters and surviving in the film and provide information about the structure of the sp chains. Endohedral sp chains in sp2 cages represent a novel way in which carbon nanostructures may be organized with potential interesting functional properties. △ Less

Submitted 14 January, 2005; originally announced January 2005.

Comments: 13 pages, 4 figures

Journal ref: New Journal of Physics 7, 81 1-8 (2005)