-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Superradiant Undulator Radiation for Selective THz Control Experiments at XFELs
Authors:
Takanori Tanikawa,
Suren Karabekyan,
Sergey Kovalev,
Sara Casalbuoni,
Vivek Asgekar,
Svitozar Serkez,
Michael Gensch,
Gianluca Geloni
Abstract:
The generation of frequency-tunable, narrow-bandwidth and carrier-envelope-phase stable THz pulses with fields in the MV/cm regime that can be appropriately timed to the femtosecond X-ray pulses from free-electron-lasers is of highest scientific interest. It will enable to follow the electronic and structural dynamics stimulated by (non)linear selective excitations of matter on few femtosecond tim…
▽ More
The generation of frequency-tunable, narrow-bandwidth and carrier-envelope-phase stable THz pulses with fields in the MV/cm regime that can be appropriately timed to the femtosecond X-ray pulses from free-electron-lasers is of highest scientific interest. It will enable to follow the electronic and structural dynamics stimulated by (non)linear selective excitations of matter on few femtosecond time and Ångstrom length scales. In this article, a scheme based on superradiant undulator radiation generated just after the XFEL is proposed. The concept utilizes cutting edge superconducting undulator technology and provides THz pulses in a frequency range between 3 and 30 THz with exceptional THz pulse energies. Relevant aspects for realization and operation are discussed point by point on the example of the European XFEL.
△ Less
Submitted 12 April, 2019; v1 submitted 14 March, 2018;
originally announced March 2018.
-
Longitudinal Bunch Diagnostics using Coherent Transition Radiation Spectroscopy
Authors:
Bernhard Schmidt,
Stephan Wesch,
Toke Kövener,
Christopher Behrens,
Eugen Hass,
Sara Casalbuoni,
Peter Schmüser
Abstract:
The generation and properties of transition radiation (TR) are thoroughly treated. The spectral energy density, as described by the Ginzburg-Frank formula, is computed analytically, and the modifications caused by the finite size of the TR screen and by near-field diffraction effects are carefully analyzed. The principles of electron bunch shape reconstruction using coherent transition radiation a…
▽ More
The generation and properties of transition radiation (TR) are thoroughly treated. The spectral energy density, as described by the Ginzburg-Frank formula, is computed analytically, and the modifications caused by the finite size of the TR screen and by near-field diffraction effects are carefully analyzed. The principles of electron bunch shape reconstruction using coherent transition radiation are outlined. Spectroscopic measure- ments yield only the magnitude of the longitudinal form factor but not its phase. Two phase retrieval methods are investigated and illustrated with model calculations: analytic phase computation by means of the Kramers- Kronig dispersion relation, and iterative phase retrieval. Particular attention is paid to the ambiguities which are unavoidable in the reconstruction of longitudinal charge density profiles from spectroscopic data. The origin of these ambiguities has been identified and a thorough mathematical analysis is presented. The experimental part of the paper comprises a description of our multichannel infrared and THz spectrometer and a selection of measurements at FLASH, comparing the bunch profiles derived from spectroscopic data with those determined with a transversely deflecting microwave structure. A rigorous derivation of the Kramers-Kronig phase formula is presented in Appendix A. Numerous analytic model calculations can be found in Appendix B. The differences between normal and truncated Gaussians are discussed in Appendix C. Finally, Appendix D contains a short description of the propagation of an electromagnetic wave front by two-dimensional fast Fourier transformation. This is the basis of a powerful numerical Mathematica code THzTransport, which permits the propagation of electromagnetic wave fronts through a beam line consisting of drift spaces, lenses, mirrors and apertures.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
Beam heat load in superconducting wigglers
Authors:
S. Casalbuoni
Abstract:
The beam heat load is a fundamental input parameter for the design of superconducting wigglers since it is needed to specify the cooling power. In this presentation I will review the possible beam heat load sources and the measurements of beam heat load performed and planned onto the cold vacuum chambers installed at different synchrotron light sources.
The beam heat load is a fundamental input parameter for the design of superconducting wigglers since it is needed to specify the cooling power. In this presentation I will review the possible beam heat load sources and the measurements of beam heat load performed and planned onto the cold vacuum chambers installed at different synchrotron light sources.
△ Less
Submitted 31 July, 2013;
originally announced July 2013.
-
Status of COLDDIAG: A Cold Vacuum Chamber for Diagnostics
Authors:
S. Gerstl,
T. Baumbach,
S. Casalbuoni,
A. W. Grau,
M. Hagelstein,
D. Saez de Jauregui,
C. Boffo,
G. Sikler,
V. Baglin,
M. P. Cox,
J. C. Schouten,
R. Cimino,
M. Commisso,
B. Spataro,
A. Mostacci,
E. J. Wallén,
R. Weigel,
J. Clarke,
D. Scott,
T. W. Bradshaw,
R. M. Jones,
I. R. R. Shinton
Abstract:
One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analy…
▽ More
One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analyzers to measure the electron energy and flux, ii) temperature sensors to measure the total heat load, iii) pressure gauges, iv) and mass spectrometers to measure the gas content. The inner vacuum chamber will be removable in order to test different geometries and materials. This will allow the installation of the cryostat in different synchrotron light sources. COLDDIAG will be built to fit in a short straight section at ANKA. A first installation at the synchrotron light source Diamond is foreseen in June 2011. Here we describe the technical design report of this device and the planned measurements with beam.
△ Less
Submitted 1 June, 2010;
originally announced June 2010.
-
Surface Superconductivity in Niobium for Superconducting RF Cavities
Authors:
S. Casalbuoni,
E. -A. Knabbe,
J. Koetzler,
L. Lilje,
L. von Sawilski,
P. Schmueser,
B. Steffen
Abstract:
A systematic study is presented on the superconductivity (sc) parameters of the ultrapure niobium used for the fabrication of the nine-cell 1.3 GHz cavities for the linear collider project TESLA. Cylindrical Nb samples have been subjected to the same surface treatments that are applied to the TESLA cavities: buffered chemical polishing (BCP), electrolytic polishing (EP), low-temperature bakeout…
▽ More
A systematic study is presented on the superconductivity (sc) parameters of the ultrapure niobium used for the fabrication of the nine-cell 1.3 GHz cavities for the linear collider project TESLA. Cylindrical Nb samples have been subjected to the same surface treatments that are applied to the TESLA cavities: buffered chemical polishing (BCP), electrolytic polishing (EP), low-temperature bakeout (LTB). The magnetization curves and the complex magnetic susceptibility have been measured over a wide range of temperatures and dc magnetic fields, and also for di erent frequencies of the applied ac magnetic field. The bulk superconductivity parameters such as the critical temperature Tc = 9.26 K and the upper critical field Bc2(0) = 410 mT are found to be in good agreement with previous data. Evidence for surface superconductivity at fields above Bc2 is found in all samples. The critical surface field exceeds the Ginzburg-Landau field Bc3 = 1.695Bc2 by about 10% in BCP-treated samples and increases even further if EP or LTB are applied. From the field dependence of the susceptibility and a power-law analysis of the complex ac conductivity and resistivity the existence of two different phases of surface superconductivity can be established which resemble the Meissner and Abrikosov phases in the bulk: (1) coherent surface superconductivity, allowing sc shielding currents flowing around the entire cylindrical sample, for external fields B in the range between Bc2 and Bcohc3, and (2) incoherent surface superconductivity with disconnected sc domains between Bcohc3 and Bc3. The coherent critical surface field separating the two phases is found to be Bcoh c3 = 0.81Bc3 for all samples. The exponents in the power law analysis are different for BCP and EP samples, pointing to different surface topologies.
△ Less
Submitted 5 March, 2004;
originally announced March 2004.
-
Superconductivity Above H_{c2} as a Probe for Niobium RF-Cavity Surfaces
Authors:
Sara Casalbuoni,
Lars von Sawilski,
Jürgen Kötzler
Abstract:
From the magnetic response of Nb-cylinders to time-varying fields the AC-conductivity, $σ'-iσ''$, and the critical current density $J_c^s$ are determined above the upper critical field $H_{c2}$. The field dependencies of $σ'$ and $σ''$ allow us to identify the nucleation of incoherent surface superconductivity (SSC) at $H_{c3}$ and of coherent SSC at $H_{c3}^c\approx 0.81H_{c3}$. The latter resu…
▽ More
From the magnetic response of Nb-cylinders to time-varying fields the AC-conductivity, $σ'-iσ''$, and the critical current density $J_c^s$ are determined above the upper critical field $H_{c2}$. The field dependencies of $σ'$ and $σ''$ allow us to identify the nucleation of incoherent surface superconductivity (SSC) at $H_{c3}$ and of coherent SSC at $H_{c3}^c\approx 0.81H_{c3}$. The latter result turns out to be independent on different surface roughnesses and surface impurities obtained by surface treatments like chemical (BCP) and electrolytical polishing (EP), and low temperature baking (LTB). They all have a large impact on $H_{c3}$ itself, which is associated with a change of electron mean free path $\ell$ due to impurities in a surface layer. A detailed analysis of $σ'$, $σ''$ and $J_c^s$ near $H_{c3}^c$ reveals that the coherence of the SSC results from a percolation transition. For EP cylinders, this transition appears to be strictly two dimensional (2D), while the analysis for BCP cylinders with a rougher surface reveal much smaller $J_c^s$ and indicate a crossover to 3D. As a rather surprising feature, we detected large concentrations of paramagnetic moments, which increased under LTB and were reduced by EP.
△ Less
Submitted 23 October, 2003;
originally announced October 2003.
