-
Sistema de sensoriamento sem fio aplicavel a deteccao de incendios florestais
Authors:
Lucas Santos Goncalves,
Celso Barbosa Carvalho
Abstract:
In this research work, a hardware and software system is developed that uses wireless sensors to monitor environmental variables such as temperature, gas concentration and luminosity, in order to detect the existence of forest fires. Lora technology was used for wireless sensor networks with communication range that can reach on average up to 5km in urban areas and 10km in rural areas. The develop…
▽ More
In this research work, a hardware and software system is developed that uses wireless sensors to monitor environmental variables such as temperature, gas concentration and luminosity, in order to detect the existence of forest fires. Lora technology was used for wireless sensor networks with communication range that can reach on average up to 5km in urban areas and 10km in rural areas. The developed system also has an integrated web application (dashboard) and that in real time, collects data from wireless sensors, which together form the sensor module, also called device. Then, this data is presented on a map associated with the positioning of each sensor module. The developed system was tested using practical experiments that used flames, gases and lighting, simulating the occurrence of fires. With the tests performed, it was observed the feasibility of the system, hardware/software developed, in detecting the fires in the simulated scenarios. Therefore, it was found that the research is promising, and may advance in the future for the detection of real fires.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Residential smart plug with bluetooth communication
Authors:
Thales Ruano Barros de Souza,
Gabriel Goes Rodrigues,
Luan da Silva Serrao,
Renata do Nascimento Mota Macambira,
Celso Barbosa Carvalho
Abstract:
Electricity forms the backbone of the modern world but increasing energy demand with the growth of urban areas in recent decades has overwhelmed the current power grid ecosystem. So, there is a need to move towards a more efficient and interconnected smart grid infrastructure. The growing popularity of the Internet of Things(IoT) has increased the demand for smart and connected devices. In this wo…
▽ More
Electricity forms the backbone of the modern world but increasing energy demand with the growth of urban areas in recent decades has overwhelmed the current power grid ecosystem. So, there is a need to move towards a more efficient and interconnected smart grid infrastructure. The growing popularity of the Internet of Things(IoT) has increased the demand for smart and connected devices. In this work we developed a hardware device based on the ATmega2560 microcontroller that can estimate the power consumption and control the state of electro-electronic devices interconnected to it through Bluetooth wireless technology. The developed hardware is a smart plug focusing on smart home applications. As a result, by using a smartphone device with Bluetooth communication, one can control and measure electrical parameters of the interconnected electro-electronic hardware such as the RMS (Root Mean Square) current and RMS power been consumed. The obtained results showed the technical viability in the construction of energy consumption measuring device using modules and components available in the Brazilian market.
△ Less
Submitted 6 January, 2021;
originally announced March 2021.
-
Localizacao em ambientes internos utilizando redes Wi-Fi
Authors:
David Alan de Oliveira Ferreira,
Celso Barbosa Carvalho,
Edjair de Souza Mota
Abstract:
This paper presents a localization method for indoor environments capable of improving the location accuracy that is hampered by instability in RSSI of the IEEE 802.11 networks. The method employs the k-Nearest Neighbors (kNN) algorithm and quartiles analysis in the data representation. The proposal had null error with only four APs and 10 readings per sample of each AP with just 0.69 second to lo…
▽ More
This paper presents a localization method for indoor environments capable of improving the location accuracy that is hampered by instability in RSSI of the IEEE 802.11 networks. The method employs the k-Nearest Neighbors (kNN) algorithm and quartiles analysis in the data representation. The proposal had null error with only four APs and 10 readings per sample of each AP with just 0.69 second to locate. These values are important contributions, confirming that the method is promising to locate objects in indoor environments.
△ Less
Submitted 29 December, 2020;
originally announced December 2020.
-
Disseminacao de mensagens DTN com base em grupos de interesses
Authors:
Eric V. das Neves,
Ronaldo N. Martins,
Celso B. Carvalho,
Edjair Mota
Abstract:
Recent works explore social characteristics of nodes to improve message delivery rate in Delay Tolerant Networks (DTN). This work uses machine learning techniques to create node groups organized by common interests. Messages are sent to target groups, and from there to the final destination. Simulation results using The ONE simulator show that the larger the group size the higher the message deliv…
▽ More
Recent works explore social characteristics of nodes to improve message delivery rate in Delay Tolerant Networks (DTN). This work uses machine learning techniques to create node groups organized by common interests. Messages are sent to target groups, and from there to the final destination. Simulation results using The ONE simulator show that the larger the group size the higher the message delivery rate, that reaches 100% in some cases. The paper also presents results related to the groups of interest such as message delivery rat, delivery delay and an average number of hops to deliver messages. The overall results indicate that group-based routing is a promising research filed.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Compressão de dados sem perdas para dispositivos IoT
Authors:
Abraão Caldas,
Renato Degelo,
Edjair Mota,
Celso B. Carvalho
Abstract:
In environments with energy and processing constraints, such as sensor networks and embedded devices, sending raw information over wireless networks can be costly. In order to reduce the amount of transmitted data and ultimately save energy, we can compress data before transmission. In this paper, we tackle such problem in the IoT domain by deploying two widely used libraries to deliver asynchrono…
▽ More
In environments with energy and processing constraints, such as sensor networks and embedded devices, sending raw information over wireless networks can be costly. In order to reduce the amount of transmitted data and ultimately save energy, we can compress data before transmission. In this paper, we tackle such problem in the IoT domain by deploying two widely used libraries to deliver asynchronous messages and data compression/decompression. We evaluate both our methodology and the compression/decompression performance of the embedded library in a micro-controller for IoT.
△ Less
Submitted 28 September, 2017;
originally announced September 2017.
-
Localizacao 3D em sistemas RFID com leitor movel
Authors:
Eric S. Ferraz,
Celso B. Carvalho
Abstract:
RFID has been widely used in applications for indoor objects location. This article proposes a 3D location algorithm based on a system that uses a mobile reader and a reference matrix of real (passive) and virtual tags. The proposed algorithm compares the RSSI of the target tag with the RSSI of the tags of the reference matrix and defines the estimated position. Preliminary results show that the l…
▽ More
RFID has been widely used in applications for indoor objects location. This article proposes a 3D location algorithm based on a system that uses a mobile reader and a reference matrix of real (passive) and virtual tags. The proposed algorithm compares the RSSI of the target tag with the RSSI of the tags of the reference matrix and defines the estimated position. Preliminary results show that the location scheme may be promising for indoor location of tags.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
