Showing 1–29 of 29 results for author: Carlevaro, C M

Molecular Mechanisms Underlying the Effects of Urea and the Structural Dynamics of Bovine Serum Albumin

Authors: Y. Ricardo Espinosa, C. Manuel Carlevaro, C. Gastón Ferrara

Abstract: The disruption of protein structures by denaturants like urea is well studied, though its molecular mechanisms remain unclear. Using Molecular Dynamics (MD) simulations, we investigated how urea affects the structural stability of Bovine Serum Albumin (BSA) at concentrations from 0 M to 5 M. Our results reveal that urea induces a dehydration/rehydration cycle, characterized by displacement and par… ▽ More The disruption of protein structures by denaturants like urea is well studied, though its molecular mechanisms remain unclear. Using Molecular Dynamics (MD) simulations, we investigated how urea affects the structural stability of Bovine Serum Albumin (BSA) at concentrations from 0 M to 5 M. Our results reveal that urea induces a dehydration/rehydration cycle, characterized by displacement and partial replacement of water molecules in BSAs hydration shell. At low concentrations, urea reduces protein/water hydrogen bonds while enhancing protein-urea interactions. At higher concentrations, urea aggregation limits these interactions, promoting rehydration and changes in tertiary structure, while secondary structure remains largely intact. These findings provide insights into the mechanisms of protein denaturation and stability by urea. △ Less

Submitted 22 April, 2025; originally announced April 2025.

Comments: 9 pages, 7 figures

Intruder in a two-dimensional granular system: statics and dynamics of force networks in an experimental system experiencing stick-slip dynamics

Authors: R. Basak, R. Kozlowski, L. A. Pugnaloni, M. Kramar, E. S. Socolar, C. M. Carlevaro, L. Kondic

Abstract: In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data doe… ▽ More In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data does not include precise information about individual contact forces, we use an approach developed in our previous work (Basak et al, J. Eng. Mechanics (2021)) based on networks constructed from measurements of the integrated strain magnitude on each particle. These networks are analyzed using topological measures based on persistence diagrams, revealing that force networks evolve smoothly but in a nontrivial manner throughout each sticking period, even though the intruder and granular particles are stationary. Characteristic features of persistence diagrams show identifiable changes as a slip is approaching, indicating the existence of slip precursors. Key features of the dynamics are similar for granular materials composed of disks or pentagons, but some details are consistently different. In particular, we find significantly larger fluctuations of the measures computed based on persistence diagrams, and therefore of the underlying networks, for systems of pentagonal particles. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Computational model for tumor response to adoptive cell transfer therapy

Authors: Luciana Melina Luque, Carlos Manuel Carlevaro, Enrique Rodríguez-Lomba, Enrique Lomba

Abstract: One of the barriers to the development of effective adoptive cell transfer therapies (ACT), specifically for genetically engineered T-cell receptors (TCRs), and chimeric antigen receptor (CAR) T-cells, is target antigen heterogeneity. It is thought that intratumor heterogeneity is one of the leading determinants of therapeutic resistance and treatment failure. While understanding antigen heterogen… ▽ More One of the barriers to the development of effective adoptive cell transfer therapies (ACT), specifically for genetically engineered T-cell receptors (TCRs), and chimeric antigen receptor (CAR) T-cells, is target antigen heterogeneity. It is thought that intratumor heterogeneity is one of the leading determinants of therapeutic resistance and treatment failure. While understanding antigen heterogeneity is important for effective therapeutics, a good therapy strategy could enhance the therapy efficiency. In this work we introduce an agent-based model to rationalize the outcomes of two types of ACT therapies over heterogeneous tumors: antigen specific ACT therapy and multi-antigen recognition ACT therapy. We found that one dose of antigen specific ACT therapy should be expected to reduce the tumor size as well as its growth rate, however it may not be enough to completely eliminate it. A second dose also reduced the tumor size as well as the tumor growth rate, but, due to the intratumor heterogeneity, it turned out to be less effective than the previous dose. Moreover, an interesting emergent phenomenon results from the simulations, namely the formation of a shield-like structure of cells with low oncoprotein expression. This shield turns out to protect cells with high oncoprotein expression. On the other hand, our studies suggest that the earlier the multi-antigen recognition ACT therapy is applied, the more efficient it turns. In fact, it could completely eliminate the tumor. Based on our results, it is clear that a proper therapeutic strategy could enhance the therapies outcomes. In that direction, our computational approach provides a framework to model treatment combinations in different scenarios and explore the characteristics of successful and unsuccessful treatments. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Physics-based tissue simulator to model multicellular systems: A study of liver regeneration and hepatocellular carcinoma recurrence

Authors: Luciana Melina Luque, Carlos Manuel Carlevaro, Camilo Llamoza Torres, Enrique Lomba

Abstract: We present a multiagent-based model that captures the interactions between different types of cells with their microenvironment, and enables the analysis of the emergent global behavior during tissue regeneration and tumor development. Using this model, we are able to reproduce the temporal dynamics of regular healthy cells and cancer cells, as well as the evolution of their three-dimensional spat… ▽ More We present a multiagent-based model that captures the interactions between different types of cells with their microenvironment, and enables the analysis of the emergent global behavior during tissue regeneration and tumor development. Using this model, we are able to reproduce the temporal dynamics of regular healthy cells and cancer cells, as well as the evolution of their three-dimensional spatial distributions. By tuning the system with the characteristics of the individual patients, our model reproduces a variety of spatial patterns of tissue regeneration and tumor growth, resembling those found in clinical imaging or biopsies. In order to calibrate and validate our model we study the process of liver regeneration after surgical hepatectomy in different degrees. In the clinical context, our model is able to predict the recurrence of a hepatocellular carcinoma after a 70% partial hepatectomy. The outcomes of our simulations are in agreement with experimental and clinical observations. By fitting the model parameters to specific patient factors, it might well become a useful platform for hypotheses testing in treatments protocols. △ Less

Submitted 30 January, 2023; v1 submitted 7 February, 2022; originally announced February 2022.

Comments: 52 pages, 11 figures

On the use of magnetic particles to enhance the flow of vibrated grains through narrow apertures

Authors: C. Manuel Carlevaro, Marcelo N Kuperman, Sebastián Bouzat, Luis A Pugnaloni, Marcos A Madrid

Abstract: The flow of grains through narrow apertures posses an extraordinary challenge: clogging. Strategies to alleviate the effect of clogging, such as the use of external vibration, are always part of the design of machinery for the handling of bulk materials. It has recently been shown that one way to reduce clogging is to use a small fraction of small particles as an additive. Besides, several works r… ▽ More The flow of grains through narrow apertures posses an extraordinary challenge: clogging. Strategies to alleviate the effect of clogging, such as the use of external vibration, are always part of the design of machinery for the handling of bulk materials. It has recently been shown that one way to reduce clogging is to use a small fraction of small particles as an additive. Besides, several works reported that self-repelling magnetic grains can flow through narrow apertures with little clogging, which suggest these are excellent candidates as "lubricating" additives for other granular materials. In this work, we study the effect of adding self-repelling magnetic particles to a sample of grains in two-dimensions. We find that, in contrast with intuition, the added magnetic grains not necessarily aid the flow of the original species. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Enhancement of the flow of vibrated grains through narrow apertures by addition of small particles

Authors: Marcos A. Madrid, C. Manuel Carlevaro, Luis A. Pugnaloni, Marcelo Kuperman, Sebastián Bouzat

Abstract: We analyze the flow and clogging of circular grains passing through a small aperture under vibration in two dimensions. Via Discrete Element Method simulations, we show that when grains smaller than the original ones are introduced in the system as an additive, the net flow of the original species can be significantly increased. Moreover, there is an optimal radius of the additive particles that m… ▽ More We analyze the flow and clogging of circular grains passing through a small aperture under vibration in two dimensions. Via Discrete Element Method simulations, we show that when grains smaller than the original ones are introduced in the system as an additive, the net flow of the original species can be significantly increased. Moreover, there is an optimal radius of the additive particles that maximizes the effect. This finding may constitute the basis for technological applications not only concerning the flow of granular materials but also regarding active matter, including pedestrian evacuation. △ Less

Submitted 9 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. E 103, 030901 (2021)

Two approaches to quantification of force networks in particulate systems

Authors: Rituparna Basak, C. Manuel Carlevaro, Ryan Kozlowski, Chao Cheng, Luis A. Pugnaloni, Miroslav Kramar, Hu Zheng, Joshua E. S. Socolar, Lou Kondic

Abstract: The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interpartic… ▽ More The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interparticle forces. In this work, we show by analysis of the data extracted from simulations that such detailed information about interparticle forces may not be necessary, as long as the focus is on extracting the most dominant features of these networks. The main finding is that a reasonable understanding of the time evolution of force networks can be obtained from incomplete information such as total force on the particles. To compare the evolution of the networks based on the completely known particle interactions and the networks based on incomplete information (total force each grain) we use tools of algebraic topology. In particular we will compare simple measures defined on persistence diagrams that provide useful summaries of the force network features. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Intruder in a two-dimensional granular system: Effects of dynamic and static basal friction on stick-slip and clogging dynamics

Authors: C. Manuel Carlevaro, Ryan Kozlowski, Luis A. Pugnaloni, Hu Zheng, Joshua E. S. Socolar, Lou Kondic

Abstract: We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to s… ▽ More We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to stick-slip. Here we first show that our simulation results are in excellent agreement with the experimental data for a variety of experimentally accessible friction coefficients governing interactions of particles with each other and with boundaries. Then, we use simulations to explore a broader range of parameter space, focusing on the friction between the particles and the base. We consider a range of both static and dynamic basal friction coefficients, which are difficult to vary smoothly in experiments. The simulations show that dynamic friction strongly affects the stick-slip behaviour when the coefficient is decreased below 0.1, while static friction plays only a marginal role in the intruder dynamics. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Comments: 19 pages, 10 figures, 2 tables

Journal ref: Phys. Rev. E 101, 012909 (2020)

Phaseless Microwave Imaging Of Dielectric Cylinders: An Artificial Neural Networks-Based Approach

Authors: Jesús E. Fajardo, Julián Galván, Fernando Vericat, Carlos M. Carlevaro, Ramiro M. Irastorza

Abstract: An inverse method for parameters estimation of infinite cylinders (the dielectric properties, location, and radius) in two dimensions from amplitude-only microwave information is presented. To this end two different Artificial Neural Networks (ANN) topologies are compared; Multilayer Perceptron (MLP) and a Convolutional Neural Network (CNN). Several simulations employing the Finite Differences in… ▽ More An inverse method for parameters estimation of infinite cylinders (the dielectric properties, location, and radius) in two dimensions from amplitude-only microwave information is presented. To this end two different Artificial Neural Networks (ANN) topologies are compared; Multilayer Perceptron (MLP) and a Convolutional Neural Network (CNN). Several simulations employing the Finite Differences in Time Domain (FDTD) method are performed to solve the direct electromagnetic problem and generate training, validation, and test sets for the ANN models. The magnitude of the mean errors in estimating the position and size of the cylinder are up to (1.9 $\pm$ 3.3) mm and (0.2 $\pm$ 0.8) mm for the MLP and CNN, respectively. The magnitude of the mean percentage relative errors in estimating the dielectric properties of the cylinder are up to (6.5 $\pm$ 13.8) % and (0.0 $\pm$ 7.2) % for the MLP and CNN, respectively. The errors in the parameters estimation from the MLP model are low, however, significantly lower errors were obtained with the CNN model. A validation example is shown using a simulation in three dimensions. Measurement examples with homogeneous and heterogeneous cylinders are presented aiming to prove the feasibility of the described method. △ Less

Submitted 25 July, 2019; originally announced August 2019.

Comments: 19 pages, 7 figures

Dynamics of a grain-scale intruder in a two-dimensional granular medium with and without basal friction

Authors: Ryan Kozlowski, C. Manuel Carlevaro, Karen E. Daniels, Lou Kondic, Luis A. Pugnaloni, Joshua E. S. Socolar, Hu Zheng, Robert P. Behringer

Abstract: We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical… ▽ More We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical regimes: intermittent flow, in which the intruder moves freely most of the time but occasionally gets stuck, and stick-slip dynamics, in which the intruder advances via a sequence of distinct, rapid events. When basal friction is present, we observe a smooth crossover between the two regimes as a function of packing fraction, and we find that reducing the interparticle friction coefficient causes the stick-slip regime to shift to higher packing fractions. When basal friction is eliminated, we observe intermittent flow at all accessible packing fractions. For all cases, we present results for the statistics of stick events, the intruder velocity, and the force exerted on the intruder by the grains. Our results indicate the qualitative importance of basal friction at high packing fractions and suggest a possible connection between intruder dynamics in a static material and clogging dynamics in granular flows. △ Less

Submitted 8 October, 2019; v1 submitted 30 May, 2019; originally announced May 2019.

Comments: 10 pages, 11 figures, 1 table. V2: What is now Fig. 5 was added to clarify the raw data measured. References [27] and [37] were updated since they were published only recently

Journal ref: Phys. Rev. E 100, 032905 (2019)

Microwave Tomography with phaseless data on the calcaneus by means of artificial neural networks

Authors: Jesús E. Fajardo, Federico P. Lotto, Fernando Vericat, C. Manuel Carlevaro, Ramiro M. Irastorza

Abstract: The aim of this study is to use a Multilayer Perceptron (MLP) Artificial Neural Network (ANN) for phaseless imaging the human heel (modeled as a bilayer dielectric media: bone and surrounding tissue) and the calcaneus cross-section size and location using a two dimensional (2D) microwave tomographic array. Computer simulations were performed over 2D dielectric maps inspired by Computed Tomography… ▽ More The aim of this study is to use a Multilayer Perceptron (MLP) Artificial Neural Network (ANN) for phaseless imaging the human heel (modeled as a bilayer dielectric media: bone and surrounding tissue) and the calcaneus cross-section size and location using a two dimensional (2D) microwave tomographic array. Computer simulations were performed over 2D dielectric maps inspired by Computed Tomography (CT) images of human heels for training and testing the MLP. A morphometric analysis was performed to account for the scatterer shape influence on the results. A robustness analysis was also conducted in order to study the MLP performance in noisy conditions. The standard deviations of the relative percentage errors on estimating the dielectric properties of the calcaneus bone were relatively high. Regarding the calcaneus surrounding tissue, the dielectric parameters estimations are better, with relative percentage error standard deviations up to $\approx$ 15 %. The location and size of the calcaneus are always properly estimated with absolute error standard deviations up to $\approx $ 3 mm. △ Less

Submitted 20 February, 2019; originally announced February 2019.

Comments: 8 pages, 6 figures

Behavior of H-FABP-fatty acid complex in a protein crystal simulation

Authors: Yanis R. Espinosa, H. Ariel Alvarez, Eduardo I. Howard, C. Manuel Carlevaro

Abstract: Crystallographic data comes from a space-time average over all the unit cells within the crystal, so dynamic phenomena do not contribute significantly to the diffraction data. Many efforts have been made to reconstitute the movement of the macromolecules and explore the microstates that the confined proteins can adopt in the crystalline network. In this paper, we explored different strategies to s… ▽ More Crystallographic data comes from a space-time average over all the unit cells within the crystal, so dynamic phenomena do not contribute significantly to the diffraction data. Many efforts have been made to reconstitute the movement of the macromolecules and explore the microstates that the confined proteins can adopt in the crystalline network. In this paper, we explored different strategies to simulate a heart fatty acid binding proteins (H-FABP) crystal starting from high resolution coordinates obtained at room temperature, describing in detail the procedure to study protein crystals (in particular H-FABP) by means of Molecular Dynamics simulations, and exploring the role of ethanol as a co-solute that can modify the stability of the protein and facilitate the interchange of fatty acids. Also, we introduced crystallographic restraints in our crystal models, according to experimental isotropic B-factors and analyzed the H-FABP crystal motions using Principal Component Analysis, isotropic and anisotropic B-factors. Our results suggest that restrained MD simulations based in experimental B-factors produce lower simulated B-factors than simulations without restraints, leading to more accurate predictions of the temperature factors. However, the systems without positional restraints represent a higher microscopic heterogeneity in the crystal. △ Less

Submitted 15 June, 2018; originally announced June 2018.

Uncertainties in permittivities computed from molecular dynamics simulations and temperature correction of dielectric properties of condensed polar systems

Authors: Hernán R. Sánchez, Ramiro M. Irastorza, C. Manuel Carlevaro

Abstract: A robust, simple and fast procedure for the calculation of uncertainties in relative static dielectric permittivity ($\varepsilon_s$) computed via molecular dynamics (MD) is proposed. It arises as a direct application of well founded statistical methods for auto-correlated variables. Also, in order to deal with the lack of experimental data about $\varepsilon_s$ and relaxation times ($τ$) at diffe… ▽ More A robust, simple and fast procedure for the calculation of uncertainties in relative static dielectric permittivity ($\varepsilon_s$) computed via molecular dynamics (MD) is proposed. It arises as a direct application of well founded statistical methods for auto-correlated variables. Also, in order to deal with the lack of experimental data about $\varepsilon_s$ and relaxation times ($τ$) at different temperatures, a method for their prediction is suggested. It requires one experimental value and at least two MD simulations. In the case of relaxation times, a theoretical justification is provided. △ Less

Submitted 16 March, 2018; originally announced March 2018.

Comments: 10 pages, 5 figures and 2 tables

Hierarchical evolutive systems, fuzzy categories and the living single cell

Authors: Alejandro M. Mesón, C. Manuel Carlevaro, Fernando Vericat

Abstract: In this article, the theory of hierarchical evolutive systems of Ehresmann and Vandremeersch [Bull. Math. Bio. 49, 13-50 (1987)] is improved by considering the categories of the theory as fuzzy sets whose elements are the composite objects formed by the arrows and corresponding vertices of their embedded graphs. This way each category can be represented as a point in the states space [0.1]**N. The… ▽ More In this article, the theory of hierarchical evolutive systems of Ehresmann and Vandremeersch [Bull. Math. Bio. 49, 13-50 (1987)] is improved by considering the categories of the theory as fuzzy sets whose elements are the composite objects formed by the arrows and corresponding vertices of their embedded graphs. This way each category can be represented as a point in the states space [0.1]**N. The introduction of a diffeomorphism, that acts in this context as a functor between categories, allows to define a measure preserving dynamical system. In particular, we apply this formalism to describe a living single cell. We propose for its state at a given time a hirerchical category with three levels (molecular, coarse-grained and cellular levels) related by adequate colimits. Each level involves the main functional and structural modules in which the cell can be partitioned. The time evolution of the cell is drived by a transformation which is a N-dimensional generalization of the Ricker map whose parameters we propose to be determined by requiring that, as hallmark of its behavior, the living cell to evolve at the edge of chaos. From the dynamical point of view this property manifests in the fact that the largest Lyapunov exponent is equal to zero. Since in a rather complete model of the living cell the huge number of involved parameters can make of the calculations a hard task, we also propose a toy model, with fewer parameters to be determined, which emphasizes the cellular fission. △ Less

Submitted 31 January, 2018; originally announced February 2018.

Comments: 39 pages, 9 figures

Sensitivity analysis on imaging the calcaneus using microwaves

Authors: Jesús E. Fajardo, Fernando Vericat, Guadalupe Irastorza, C. Manuel Carlevaro, Ramiro M. Irastorza

Abstract: The bone quality is asociated with changes in its dielectric properties (permittivity and conductivity). The feasibility of detecting changes in these properties is evaluated using a tomographic array of 16 monopole antennas with z-polarized microwaves at 1.3GHz. The direct problem was evaluated computationally with the Finite-Difference-Time-Domain (FDTD) method. Local and global sensitivity anal… ▽ More The bone quality is asociated with changes in its dielectric properties (permittivity and conductivity). The feasibility of detecting changes in these properties is evaluated using a tomographic array of 16 monopole antennas with z-polarized microwaves at 1.3GHz. The direct problem was evaluated computationally with the Finite-Difference-Time-Domain (FDTD) method. Local and global sensitivity analysis were considered for identifiyng the parameters that most affect the detection. We observed that the direct problem is highly sensitive to the conductivity of the tissues that surround the calcaneus and the one of the calcaneus itself. Global and local sensitivity methods have shown evidences for feasible detection of variation in dielectric properties of bone. △ Less

Submitted 14 September, 2017; originally announced September 2017.

Comments: 19 pages, 5 figures

MSC Class: 92C55

Chirality in a quaternionic representation of the genetic code

Authors: C. Manuel Carlevaro, Ramiro M. Irastorza, Fernando Vericat

Abstract: A quaternionic representation of the genetic code, previously reported by the authors, is updated in order to incorporate chirality of nucleotide bases and amino acids. The original representation assigns to each nucleotide base a prime integer quaternion of norm 7 and involves a function that associates with each codon, represented by three of these quaternions, another integer quaternion (amino… ▽ More A quaternionic representation of the genetic code, previously reported by the authors, is updated in order to incorporate chirality of nucleotide bases and amino acids. The original representation assigns to each nucleotide base a prime integer quaternion of norm 7 and involves a function that associates with each codon, represented by three of these quaternions, another integer quaternion (amino acid type quaternion) in such a way that the essentials of the standard genetic code (particulaty its degeneration) are preserved. To show the advantages of such a quaternionic representation we have, in turn, associated with each amino acid of a given protein, besides of the type quaternion, another real one according to its order along the protein (order quaternion) and have designed an algorithm to go from the primary to the tertiary structure of the protein by using type and order quaternions. In this context, we incorporate chirality in our representation by observing that the set of eight integer quaternions of norm 7 can be partitioned into a pair of subsets of cardinality four each with their elements mutually conjugates and by putting they in correspondence one to one with the two sets of enantiomers (D and L) of the four nucleotide bases adenine, cytosine, guanine and uracil, respectively. Thus, guided by two diagrams proposed for the codes evolution, we define functions that in each case assign a L- (D-) amino acid type integer quaternion to the triplets of D- (L-) bases. The assignation is such that for a given D-amino acid, the associated integer quaternion is the conjugate of that one corresponding to the enantiomer L. The chiral type quaternions obtained for the amino acids are used, together with a common set of order quaternions, to describe the folding of the two classes, L and D, of homochiral proteins. △ Less

Submitted 30 December, 2015; originally announced February 2016.

Comments: 17 pages, 9 figures. arXiv admin note: substantial text overlap with arXiv:1505.04656

Structure of force networks in tapped particulate systems of disks and pentagons (Part 2): Persistence analysis

Authors: L. Kondic, M. Kramar, L. A. Pangolin, C. M. Carlevaro, K. Mischaikow

Abstract: In the companion paper~\cite{paper1}, we use classical measures based on force probability density functions (PDFs), as well as Betti numbers (quantifying the number of components, related to force chains, and loops), to describe the force networks in tapped systems of disks and pentagons. In the present work, we focus on the use of persistence analysis, that allows to describe these networks in m… ▽ More In the companion paper~\cite{paper1}, we use classical measures based on force probability density functions (PDFs), as well as Betti numbers (quantifying the number of components, related to force chains, and loops), to describe the force networks in tapped systems of disks and pentagons. In the present work, we focus on the use of persistence analysis, that allows to describe these networks in much more detail. This approach allows not only to describe, but also to quantify the differences between the force networks in different realizations of a system, in different parts of the considered domain, or in different systems. We show that persistence analysis clearly distinguishes the systems that are very difficult or impossible to differentiate using other means. One important finding is that the differences in force networks between disks and pentagons are most apparent when loops are considered: the quantities describing properties of the loops may differ significantly even if other measures (properties of components, Betti numbers, or force PDFs) do not distinguish clearly the investigated systems. △ Less

Submitted 14 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. E 93, 062903 (2016)

Structure of force networks in tapped particulate systems of disks and pentagons (Part 1): Clusters and Loops

Authors: L. A. Pugnaloni, C. M. Carlevaro, M. Kramar, K. Mischaikow, L. Kondic

Abstract: The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of… ▽ More The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of tapped systems built from frictional disks and pentagons, and study the structure of the force networks of granular packings by considering network's topology as force thresholds are varied. We show that the number of clusters and loops observed in the force networks as a function of the force threshold are markedly different for disks and pentagons if the tangential contact forces are considered, whereas they are surprisingly similar for the network defined by the normal forces. In particular, the results indicate that, overall, the force network is more heterogeneous for disks than for pentagons. Additionally, we show that the states obtained by tapping with different intensities that display similar packing fraction are difficult to distinguish based on simple topological invariants. △ Less

Submitted 11 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. E 93, 062902 (2016)

Flow rate of polygonal grains through a bottleneck: Interplay between shape and size

Authors: Ezequiel Goldberg, C. Manuel Carlevaro, Luis A. Pugnaloni

Abstract: We report two-dimensional simulations of circular and polygonal grains passing through an aperture at the bottom of a silo. The mass flow rate for regular polygons is lower than for disks as observed by other authors. We show that both the exit velocity of the grains and the packing fraction are lower for polygons, which leads to the reduced flow rate. We point out the importance of the criteria u… ▽ More We report two-dimensional simulations of circular and polygonal grains passing through an aperture at the bottom of a silo. The mass flow rate for regular polygons is lower than for disks as observed by other authors. We show that both the exit velocity of the grains and the packing fraction are lower for polygons, which leads to the reduced flow rate. We point out the importance of the criteria used to define when two objects of different shape are considered to be of the same size. Depending on this criteria, the mass flow rate may vary significantly for some polygons. Moreover, the particle flow rate is non-trivially related to a combination of mass flow rate, particle shape and particle size. For some polygons, the particle flow rate may be lower or higher than that of the corresponding disks depending on the size comparison criteria. △ Less

Submitted 21 May, 2015; originally announced May 2015.

Comments: 9 pages, 8 figures

Quaternionic representation of the genetic code

Authors: C. Manuel Carlevaro, Ramiro M. Irastorza, Fernando Vericat

Abstract: A heuristic diagram of the evolution of the standard genetic code is presented. It incorporates, in a way that resembles the energy levels of an atom, the physical notion of broken symmetry and it is consistent with original ideas by Crick on the origin and evolution of the code as well as with the chronological order of appearence of the amino acids along the evolution as inferred from work that… ▽ More A heuristic diagram of the evolution of the standard genetic code is presented. It incorporates, in a way that resembles the energy levels of an atom, the physical notion of broken symmetry and it is consistent with original ideas by Crick on the origin and evolution of the code as well as with the chronological order of appearence of the amino acids along the evolution as inferred from work that mixtures known experimental results with theoretical speculations. Suggested by the diagram we propose a Hamilton quaternions based mathematical representation of the code as it stands now-a-days. The central object in the description is a codon function that assigns to each amino acid an integer quaternion in such a way that the observed code degeneration is preserved. We emphasize the advantages of a quaternionic representation of amino acids taking as an example the folding of proteins. With this aim we propose an algorithm to go from the quaternions sequence to the protein three dimensional structure which can be compared with the corresponding experimental one stored at the Protein Data Bank. In our criterion the mathematical representation of the genetic code in terms of quaternions merits to be taken into account because it describes not only most of the known properties of the genetic code but also opens new perspectives that are mainly derived from the close relationship between quaternions and rotations. △ Less

Submitted 29 December, 2015; v1 submitted 18 May, 2015; originally announced May 2015.

Comments: 19 pages, 11 figures

Modelling of the dielectric properties of trabecular bone samples at microwave frequency

Authors: Ramiro M. Irastorza, Eugenia Blangino, Carlos M. Carlevaro, Fernando Vericat

Abstract: In this paper the dielectric properties of human trabecular bone are evaluated under physiological condition in the microwave range. Assuming a two components medium, simulation and experimental data are presented and discussed. A special experimental setup is developed in order to deal with inhomogeneous samples. Simulation data are obtained using finite difference time domain from a realistic sa… ▽ More In this paper the dielectric properties of human trabecular bone are evaluated under physiological condition in the microwave range. Assuming a two components medium, simulation and experimental data are presented and discussed. A special experimental setup is developed in order to deal with inhomogeneous samples. Simulation data are obtained using finite difference time domain from a realistic sample. The bone mineral density of the samples are also measured. The simulation and experimental results of the present study suggest that there is a negative relation between bone volume fraction (BV/TV) and permittivity (conductivity): the higher the BV/TV the lower the permittivity (conductivity). This is in agreement with the recently published in vivo data. Keywords: Bone dielectric properties, Microwave tomography, Finite difference time domain. △ Less

Submitted 9 December, 2013; originally announced December 2013.

Comments: 10 pages, 5 figures, 4 tables

Exact predictions from Edwards ensemble vs. realistic simulations of tapped narrow two-dimensional granular columns

Authors: Ramiro M. Irastorza, C. Manuel Carlevaro, Luis A. Pugnaloni

Abstract: We simulate via a Discrete Element Method the tapping of a narrow column of disk under gravity. For frictionless disks, this system has a simple analytic expression for the density of states in the Edwards volume ensemble. We compare the predictions of the ensemble at constant compactivity against the results for the steady states obtained in the simulations. We show that the steady states cannot… ▽ More We simulate via a Discrete Element Method the tapping of a narrow column of disk under gravity. For frictionless disks, this system has a simple analytic expression for the density of states in the Edwards volume ensemble. We compare the predictions of the ensemble at constant compactivity against the results for the steady states obtained in the simulations. We show that the steady states cannot be properly described since the microstates sampled are not in correspondence with the predicted distributions, suggesting that the postulates of flat measure and ergodicity are, either or both, invalid for this simple realization of a static granular system. However, we show that certain qualitative features of the volume fluctuations difficult to predict from simple arguments are captured by the theory. △ Less

Submitted 5 November, 2013; originally announced November 2013.

Comments: 11 pages, 6 figures

Is there any information on micro-structure in microwave tomography of bone tissue?

Authors: Ramiro M. Irastorza, C. Manuel Carlevaro, Fernando Vericat

Abstract: In this work, two-dimensional simulations of the microwave dielectric properties of models with ellipses and realistic models of trabecular bone tissue are performed. In these simulations, finite difference time domain methodology has been applied to simulate two-phase structures containing inclusions. The results presented here show that the micro-structure is an important factor in the effective… ▽ More In this work, two-dimensional simulations of the microwave dielectric properties of models with ellipses and realistic models of trabecular bone tissue are performed. In these simulations, finite difference time domain methodology has been applied to simulate two-phase structures containing inclusions. The results presented here show that the micro-structure is an important factor in the effective dielectric properties of trabecular bone. We consider the feasibility of using the dielectric behaviour of bone tissue to be an indicator of bone health. The frequency used was 950 MHz. It was found that the dielectric properties can be used as an estimate of the degree of anisotropy of the micro-structure of the trabecular tissue. Conductivity appears to be the most sensitive parameter in this respect. Models with ellipse shaped-inclusions are also tested to study their application to modelling bone tissue. Models with ellipses that had an aspect ratio of a/b = 1.5 showed relatively good agreement when compared with realistic models of bone tissue. According to the results presented here, the anisotropy of trabecular bone must be accounted for when measuring its dielectric properties using microwave imaging. △ Less

Submitted 4 December, 2012; v1 submitted 3 July, 2012; originally announced July 2012.

Comments: 21 pages, 7 figures

Journal ref: Med Eng Phys. 2013 Aug;35(8):1173-80

Arches and contact forces in a granular pile

Authors: C. Manuel Carlevaro, Luis A. Pugnaloni

Abstract: Assemblies of granular particles mechanically stable under their own weight contain arches. These are structural units identified as sets of mutually stable grains. It is generally assumed that these arches shield the weight above them and should bear most of the stress in the system. We test such hypothesis by studying the stress born by in-arch and out-of-arch grains. We show that, indeed, parti… ▽ More Assemblies of granular particles mechanically stable under their own weight contain arches. These are structural units identified as sets of mutually stable grains. It is generally assumed that these arches shield the weight above them and should bear most of the stress in the system. We test such hypothesis by studying the stress born by in-arch and out-of-arch grains. We show that, indeed, particles in arches withstand larger stresses. In particular, the isotropic stress tends to be larger for in-arch-grains whereas the anisotropic component is marginally distinguishable between the two types of particles. The contact force distributions demonstrate that an exponential tail (compatible with the maximization of entropy under no extra constraints) is followed only by the out-of-arch contacts. In-arch contacts seem to be compatible with a Gaussian distribution consistent with a recently introduced approach that takes into account constraints imposed by the local force balance on grains. △ Less

Submitted 29 May, 2012; v1 submitted 21 October, 2011; originally announced October 2011.

Comments: 7 pages, 7 figures, major revision

Journal ref: Eur. Phys. J. E 35, 44 (2012)

Nonlinear dynamic analysis of an optimal particle damper

Authors: Martín Sánchez, C. Manuel Carlevaro

Abstract: We study the dynamical behavior of a single degree of freedom mechanical system with a particle damper. The particle (granular) damping was optimized for the primary system operating condition by using an appropriate gap size for a prismatic enclosure. The particles absorb the kinetic energy of the vibrating structure and convert it into heat through the inelastic collisions and friction. This res… ▽ More We study the dynamical behavior of a single degree of freedom mechanical system with a particle damper. The particle (granular) damping was optimized for the primary system operating condition by using an appropriate gap size for a prismatic enclosure. The particles absorb the kinetic energy of the vibrating structure and convert it into heat through the inelastic collisions and friction. This results in a highly nonlinear mechanical system. Considering linear signal analysis, state space reconstruction, Poincaré sections and the determination of maximal Lyapunov exponents, the motion of the granular system inside the enclosure is characterized for a wide frequency range. With the excitation frequency as control parameter, either regular and chaotic motion of the granular bed are found and their influence on the damping is analyzed. △ Less

Submitted 12 October, 2011; originally announced October 2011.

Comments: 18 pages, 8 figures. arXiv admin note: text overlap with arXiv:1105.0304

Genetic algorithm for the pair distribution function of the electron gas

Authors: Fernando Vericat, César O. Stoico, C. Manuel Carlevaro, Danilo G. Renzi

Abstract: The pair distribution function of the electron gas is calculated using a parameterized generalization of quantum hypernetted chain approximation with the parameters being obtained by optimizing the system energy with a genetic algorithm. The functions so obtained are compared with Monte Carlo simulations performed by other authors in its variational and diffusion versions showing a very good agree… ▽ More The pair distribution function of the electron gas is calculated using a parameterized generalization of quantum hypernetted chain approximation with the parameters being obtained by optimizing the system energy with a genetic algorithm. The functions so obtained are compared with Monte Carlo simulations performed by other authors in its variational and diffusion versions showing a very good agreement especially with the diffusion Monte Carlo results. △ Less

Submitted 12 May, 2011; originally announced May 2011.

Comments: 13 pages, 3 figures, 1 table

Steady state of tapped granular polygons

Authors: Carlos M. Carlevaro, Luis A. Pugnaloni

Abstract: The steady state packing fraction of a tapped granular bed is studied for different grain shapes via a discrete element method. Grains are monosized regular polygons, from triangles to icosagons. Comparisons with disk packings show that the steady state packing fraction as a function of the tapping intensity presents the same general trends in polygon packings. However, better packing fractions ar… ▽ More The steady state packing fraction of a tapped granular bed is studied for different grain shapes via a discrete element method. Grains are monosized regular polygons, from triangles to icosagons. Comparisons with disk packings show that the steady state packing fraction as a function of the tapping intensity presents the same general trends in polygon packings. However, better packing fractions are obtained, as expected, for shapes that can tessellate the plane (triangles, squares and hexagons). In addition, we find a sharp transition for packings of polygons with more than 13 vertices signaled by a discontinuity in the packing fraction at a particular tapping intensity. Density fluctuations for most shapes are consistent with recent experimental findings in disk packing; however, a peculiar behavior is found for triangles and squares. △ Less

Submitted 19 October, 2010; originally announced October 2010.

Comments: 10 pages, 5 figures

Journal ref: J. Stat. Mech. P01007 (2011)

Quantum hypernetted chain approximation for one dimensional fermionic systems

Authors: C. O. Stoico, C. M. Carlevaro, D. G. Renzi, F. Vericat

Abstract: In this comprehensible article we develop, following Fantoni and Rosati formalism, a hypernetted chain approximation for one dimensional systems of fermions. Our scheme differs from previous treatments in the form that the whole set of diagrams is grouped: we do it in terms of non-nodal, non-composite and elementary graphs. This choice makes the deduction of equations more transparent. Equations… ▽ More In this comprehensible article we develop, following Fantoni and Rosati formalism, a hypernetted chain approximation for one dimensional systems of fermions. Our scheme differs from previous treatments in the form that the whole set of diagrams is grouped: we do it in terms of non-nodal, non-composite and elementary graphs. This choice makes the deduction of equations more transparent. Equations for the pair distribution functions of one component systems as well as binary mixtures are obtained. We apply they to experimentally realizable quasi-one dimensional systems, the so called quantum wires which we model, within Sommerfeld-Pauli spirit, as a 1D electron gas or as an electron-hole mixture. In order to use our one-dimensional equations we consider pair potentials that depend on the wires width. △ Less

Submitted 2 October, 2009; originally announced October 2009.

Comments: 41 pages, 14 figures

Nonmonotonic reversible branch in four model granular beds subjected to vertical vibration

Authors: Luis A. Pugnaloni, Martin Mizrahi, Carlos M. Carlevaro, Fernando Vericat

Abstract: We present results from four independent models of a granular assembly subjected to tapping. We find that the steady-state packing fraction as a function of the tapping intensity is nonmonotonic. In particular, for high tapping intensities, we observe an increase of the packing fraction with tapping strength. This finding challenges the current understanding of compaction of granular media since… ▽ More We present results from four independent models of a granular assembly subjected to tapping. We find that the steady-state packing fraction as a function of the tapping intensity is nonmonotonic. In particular, for high tapping intensities, we observe an increase of the packing fraction with tapping strength. This finding challenges the current understanding of compaction of granular media since the steady-state packing fraction is believed to decrease monotonically with increasing tapping intensity. We propose an explanation of our results based on the properties of the arches formed by the particles. △ Less

Submitted 17 February, 2010; v1 submitted 7 March, 2008; originally announced March 2008.

Comments: 8 pages, 7 figures

Journal ref: Phys. Rev. E 78, 051305 (2008)