-
Active volatile drops on liquid baths
Authors:
Benjamin Reichert,
Jean-Benoît Le Cam,
Arnaud Saint-Jalmes,
Giuseppe Pucci
Abstract:
In most experimental studies, active drops propel in a liquid bulk due to self-generated interfacial stresses of solutal origin. Here, we demonstrate the self-propulsion of a volatile drop on the surface of a liquid bath due to stresses of thermal origin. Evaporative heat pumping is converted into directed motion driven by thermocapillary stresses, which emerge on the drop surface as a result of a…
▽ More
In most experimental studies, active drops propel in a liquid bulk due to self-generated interfacial stresses of solutal origin. Here, we demonstrate the self-propulsion of a volatile drop on the surface of a liquid bath due to stresses of thermal origin. Evaporative heat pumping is converted into directed motion driven by thermocapillary stresses, which emerge on the drop surface as a result of a symmetry breaking of the drop temperature field. The dependence of the drop speed on the activity source, i.e. the evaporation flux, is derived with scaling arguments and captures the experimental data.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
The polarized spectral energy distribution of NGC 4151
Authors:
F. Marin,
J. Le Cam,
E. Lopez-Rodriguez,
M. Kolehmainen,
B. L. Babler,
M. R. Meade
Abstract:
NGC 4151 is among the most well-studied Seyfert galaxies that does not suffer from strong obscuration along the observer's line-of-sight. This allows to probe the central active galactic nucleus (AGN) engine with photometry, spectroscopy, reverberation mapping or interferometry. Yet, the broadband polarization from NGC 4151 has been poorly examined in the past despite the fact that polarimetry giv…
▽ More
NGC 4151 is among the most well-studied Seyfert galaxies that does not suffer from strong obscuration along the observer's line-of-sight. This allows to probe the central active galactic nucleus (AGN) engine with photometry, spectroscopy, reverberation mapping or interferometry. Yet, the broadband polarization from NGC 4151 has been poorly examined in the past despite the fact that polarimetry gives us a much cleaner view of the AGN physics than photometry or spectroscopy alone. In this paper, we compile the 0.15 -- 89.0 $μ$m total and polarized fluxes of NGC 4151 from archival and new data in order to examine the physical processes at work in the heart of this AGN. We demonstrate that, from the optical to the near-infrared (IR) band, the polarized spectrum of NGC 4151 shows a much bluer power-law spectral index than that of the total flux, corroborating the presence of an optically thick, locally heated accretion flow, at least in its near-IR emitting radii. Specific signatures from the atmosphere of the accretion structure are tentatively found at the shortest ultraviolet (UV) wavelengths, before the onset of absorption opacity. Otherwise, dust scattering appears to be the dominant contributor from the near-UV to near-IR polarized spectrum, superimposed onto a weaker electron component. We also identify a change in the polarization processes from the near-IR to the mid-IR, most likely associated with the transition from Mie scattering to dichroic absorption from aligned dust grains in the dusty torus or narrow-line region. Finally, we present and dicuss the very first far-infrared polarization measurement of NGC 4151 at 89 $μ$m.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Identification of constitutive parameters from full thermal and kinematic fields: application to hyperelasticity
Authors:
S. Charlès,
Jean-Benoit Le Cam
Abstract:
In this paper, a new inverse identification method is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source from two approaches, a first one that requires the measurement of the temperature field and the value of the thermophysical parameters, and a second one based on the measurement of the kinematics field and a thermo-hyperelastic model that…
▽ More
In this paper, a new inverse identification method is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source from two approaches, a first one that requires the measurement of the temperature field and the value of the thermophysical parameters, and a second one based on the measurement of the kinematics field and a thermo-hyperelastic model that contains the parameters to be identified. The identification does not require any boundary conditions since it is carried out at the local scale. In the present work, the method is applied to the identification of hyperelastic parameters from a heterogeneous heat source field. Due to large deformation undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and thermal fields at the same points before reconstructing the heat source.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Development of an inverse identification method for identifying constitutive parameters by metaheuristic optimization algorithm: Application to hyperelastic materials
Authors:
G Bastos,
A Tayeb,
N. Di Cesare,
Jean-Benoit Le Cam,
E Robin
Abstract:
In the present study, a numerical method based on a metaheuristic parametric algorithm has been developed to identify the constitutive parameters of hyperelastic models, by using FE simulations and full kinematic field measurements. The full kinematic field is measured at the surface of a cruciform specimen submitted to equibiaxial tension. The sample is reconstructed by FE to obtain the numerical…
▽ More
In the present study, a numerical method based on a metaheuristic parametric algorithm has been developed to identify the constitutive parameters of hyperelastic models, by using FE simulations and full kinematic field measurements. The full kinematic field is measured at the surface of a cruciform specimen submitted to equibiaxial tension. The sample is reconstructed by FE to obtain the numerical kinematic field to be compared with the experimental one. The constitutive parameters used in the numerical model are then modified through the optimization process, for the numerical kinematic field to fit with the experimental one. The cost function is then formulated as the minimization of the difference between these two kinematic fields. The optimization algorithm is an adaptation of the Particle Swarm Optimization algorithm, based on the PageRank algorithm used by the famous search engine Google. INTRODUCTION The constitutive parameters of hyperelastic models are generally identified from three homogeneous tests, basically the uniaxial tension, the pure shear and the equibiaxial tension. From about 10 years, an alternative methodology has been developed [1, 2, 3, 4], and consists in performing only one heterogeneous test as long as the field is sufficiently heterogeneous. This is tipically the case when a multiaxial loading is applied to a 3 branch or a 4-branch cruciform specimen, which induces a large number of mechanical states at the specimen surface. The induced heterogeneity is generally analysed through the distribution of the biaxiality ratio and the maximal eigen value of the strain. The Digital Image Correlation (DIC) technique is generally used to retrieve the different mechanical states induces, and provides the full kinematic field at the specimen surface, i.e. a large number of experimental data to be analysed to identify the constitutive parameters of the behaviour model considered.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
A post mortem analysis of the strain-induced crystallization effects on fatigue of elastomers
Authors:
B. Ruellan,
Jean-Benoit Le Cam,
E. Robin,
I. Jeanneau,
F. Canevet,
G. Mauvoisin,
D. Loison
Abstract:
Natural rubber (NR) is the most commonly used elastomer in the automotive industry thanks to its outstanding fatigue resistance. Strain-induced crystallization (SIC) is found to play a role of paramount importance in the great crack growth resistance of NR [1]. Typically, NR exhibits a lifetime reinforcement for non-relaxing loadings [2-3]. At the microscopic scale, fatigue striations were observe…
▽ More
Natural rubber (NR) is the most commonly used elastomer in the automotive industry thanks to its outstanding fatigue resistance. Strain-induced crystallization (SIC) is found to play a role of paramount importance in the great crack growth resistance of NR [1]. Typically, NR exhibits a lifetime reinforcement for non-relaxing loadings [2-3]. At the microscopic scale, fatigue striations were observed on the fracture surface of Diabolo samples tested in fatigue. They are the signature of SIC [2,4,5]. In order to provide additional information on the role of SIC in the fatigue crack growth resistance of NR, striations are investigated through post-mortem analysis after fatigue experiments using loading ranging from-0.25 to 0.25. No striation was observed in the case of tests performed at 90{\textdegree}C. This confirms that the formation of striation requires a certain crystallinity level in the material. At 23{\textdegree}C, two striation regimes were identified: small striation patches with different orientations (Regime 1) and zones with large and well-formed striations (Regime 2). Since fatigue striations are observed for all the loading ratios applied, they are therefore not the signature of the reinforcement. Nevertheless, increasing the minimum value of the strain amplified the striation phenomenon and the occurrence of Regime 2.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Identification of Constitutive Parameters Governing the Hyperelastic Response of Rubber by Using Full-field Measurement and the Virtual Fields Method
Authors:
A Tayeb,
Jean-Benoit Le Cam,
M. Grédiac,
E. Toussaint,
F. Canevet,
E. Robin,
X. Balandraud
Abstract:
In this study, the Virtual Fields Method (VFM) is applied to identify constitutive parameters of hyperelastic models from a heterogeneous test. Digital image correlation (DIC) was used to estimate the displacement and strain fields required by the identification procedure. Two different hyperelastic models were considered: the Mooney model and the Ogden model. Applying the VFM to the Mooney model…
▽ More
In this study, the Virtual Fields Method (VFM) is applied to identify constitutive parameters of hyperelastic models from a heterogeneous test. Digital image correlation (DIC) was used to estimate the displacement and strain fields required by the identification procedure. Two different hyperelastic models were considered: the Mooney model and the Ogden model. Applying the VFM to the Mooney model leads to a linear system that involves the hyperelastic parameters thanks to the linearity of the stress with respect to these parameters. In the case of the Ogden model, the stress is a nonlinear function of the hyperelastic parameters and a suitable procedure should be used to determine virtual fields leading to the best identification. This complicates the identification and affects its robustness. This is the reason why the sensitivity-based virtual field approach recently proposed in case of anisotropic plasticity by Marek et al. (2017) [1] has been successfully implemented to be applied in case of hyperelasticity. Results obtained clearly highlight the benefits of such an inverse identification approach in case of non-linear systems.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
