Showing 1–6 of 6 results for author: Butola, M

Convergent-beam attosecond X-ray crystallography

Authors: Henry N. Chapman, Chufeng Li, Saša Bajt, Mansi Butola, J. Lukas Dresselhaus, Dmitry Egorov, Holger Fleckenstein, Nikolay Ivanov, Antonia Kiene, Bjarne Klopprogge, Viviane Kremling, Philipp Middendorf, Dominik Oberthuer, Mauro Prasciolu, T. Emilie S. Scheer, Janina Sprenger, Jia Chyi Wong, Oleksandr Yefanov, Margarita Zakharova, Wenhui Zhang

Abstract: Sub-angstrom spatial resolution of electron density coupled with sub-femtosecond temporal resolution is required to directly observe the dynamics of the electronic structure of a molecule after photoinitiation or some other ultrafast perturbation. Meeting this challenge, pushing the field of quantum crystallography to attosecond timescales, would bring insights into how the electronic and nuclear… ▽ More Sub-angstrom spatial resolution of electron density coupled with sub-femtosecond temporal resolution is required to directly observe the dynamics of the electronic structure of a molecule after photoinitiation or some other ultrafast perturbation. Meeting this challenge, pushing the field of quantum crystallography to attosecond timescales, would bring insights into how the electronic and nuclear degrees of freedom couple, enable the study of quantum coherences involved in molecular dynamics, and ultimately enable these dynamics to be controlled. Here we propose to reach this realm by employing convergent-beam X-ray crystallography with high-power attosecond pulses from a hard-X-ray free-electron laser. We show that with dispersive optics, such as multilayer Laue lenses of high numerical aperture, it becomes possible to encode time into the resulting diffraction pattern with deep sub-femtosecond precision. Each snapshot diffraction pattern consists of Bragg streaks that can be mapped back to arrival times and positions of X-rays on the face of a crystal. This can span tens of femtoseconds, and can be finely sampled as we demonstrate experimentally. The approach brings several other advantages, such as an increase of the number of observable reflections in a snapshot diffraction pattern, all fully integrated, to improve the speed and accuracy of serial crystallography -- especially for crystals of small molecules. △ Less

Submitted 17 September, 2024; originally announced September 2024.

Comments: 18 pages, 7 figures

3D Reconstruction of unstained cells from a single defocused hologram

Authors: Sunaina Rajora, Mansi Butola, Kedar Khare

Abstract: We investigate the problem of 3D complex field reconstruction corresponding to unstained red blood cells (RBCs) with a single defocused off-axis digital hologram. We employ recently introduced mean gradient descent (MGD) optimization framework, to solve the 3D recovery problem. While investigating volume recovery problem for a continuous phase object like RBC, we came across an interesting feature… ▽ More We investigate the problem of 3D complex field reconstruction corresponding to unstained red blood cells (RBCs) with a single defocused off-axis digital hologram. We employ recently introduced mean gradient descent (MGD) optimization framework, to solve the 3D recovery problem. While investigating volume recovery problem for a continuous phase object like RBC, we came across an interesting feature of the back-propagated field that it does not show clear focusing effect. Therefore the sparsity enforcement within the iterative optimization framework given the single hologram data cannot effectively restrict the true object volume. For phase objects, it is known that the amplitude contrast of the back-propagated object field at the focus plane is minimum and it increases at the defocus planes. We therefore use this information available in the detector field data to device weights as a function of inverse of amplitude contrast. This weight function is employed in the iterative steps of the optimization algorithm to assist the object volume localization. The experimental illustrations of 3D volume reconstruction of the healthy as well as the malaria infected RBCs are presented. The proposed methodology is simple to implement experimentally and provides an approximate tomographic solution which is axially restricted and is consistent with the object field data. △ Less

Submitted 22 October, 2022; originally announced October 2022.

Robust phase retrieval with complexity-guidance for coherent X-ray imaging

Authors: Mansi Butola, Sunaina Rajora, Kedar Khare

Abstract: Reconstruction of a stable and reliable solution from noisy incomplete Fourier intensity data recorded in a coherent X-ray imaging (CXI) experiment is a challenging problem. The Relaxed Averaged Alternating Reflections (RAAR) algorithm that is concluded with a number of Error Reduction (ER) iterations is a popular choice. The RAAR-ER algorithm is usually employed for several hundreds of times star… ▽ More Reconstruction of a stable and reliable solution from noisy incomplete Fourier intensity data recorded in a coherent X-ray imaging (CXI) experiment is a challenging problem. The Relaxed Averaged Alternating Reflections (RAAR) algorithm that is concluded with a number of Error Reduction (ER) iterations is a popular choice. The RAAR-ER algorithm is usually employed for several hundreds of times starting with independent random guesses to obtain trial solutions that are then averaged to obtain the phase retrieval transfer function (PRTF). In this paper, we examine the phase retrieval solution obtained using the RAAR-ER methodology from perspective of the complexity parameter that was introduced by us in recent works. We observe that a single run of the RAAR-ER algorithm produces a solution with higher complexity compared to what is expected based on the complexity parameter as manifested by spurious high frequency grainy artifacts in the solution that do not seem to go away completely even after a number of trial solutions are averaged. We then describe a CG-RAAR (Complexity Guided RAAR) phase retrieval method that can effectively address this inconsistency problem and provides artifact-free solutions. The CG-RAAR methodology is first illustrated with simulated unblocked noisy Fourier intensity data and later applied to centrally-blocked noisy cyanobacterium data which is available from the CXIDB database. Our simulation and experimental results using CG-RAAR suggest two important improvements over the popular RAAR-ER algorithm. The CG-RAAR solutions after the averaging procedure is more reliable in the sense that it contains smallest features consistent with the resolution estimated by the PRTF curve. Secondly, since the single run of the CG-RAAR solution does not have grainy artifacts, the number of trial solutions needed for the averaging process is reduced. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Journal ref: Intell. Comput. 2022, 9819716 (2022)

True 3D reconstruction in digital holography

Authors: Jasleen Birdi, Sunaina, Mansi Butola, Kedar Khare

Abstract: We examine the nature of the 3D image as obtained by replay (or back-propagation) of the object wave from the hologram recording plane to the original object volume. While recording of a hologram involves transferring information from a 3D volume to a 2D detector plane, the replay of the hologram involves creating information in a set of 3D voxels from a much smaller number of 2D detector pixels,… ▽ More We examine the nature of the 3D image as obtained by replay (or back-propagation) of the object wave from the hologram recording plane to the original object volume. While recording of a hologram involves transferring information from a 3D volume to a 2D detector plane, the replay of the hologram involves creating information in a set of 3D voxels from a much smaller number of 2D detector pixels, which at first look appears to be surprising. We point out that the hologram replay process is a Hermitian transpose (and not inverse) of the hologram formation process and therefore only provides an approximation to the original 3D object function. With the knowledge of this Hermitian transpose property, we show how one may realize true 3D image reconstruction via a regularized optimization algorithm. The numerical illustrations of this optimization approach as presented here show excellent slice-by-slice tomographic 3D reconstruction of the original object under the weak scattering approximation. In particular, the reconstructed 3D image field has near-zero numerical values at voxels where the original object did not exist. We note that 3D image reconstruction of this kind cannot be achieved by the traditional physical replay process. In this sense the proposed methodology for digital holographic image reconstruction goes beyond numerically mimicking the traditional film based holographic replay. The reconstruction approach may find potential applications in a number of digital holographic imaging systems. △ Less

Submitted 16 April, 2020; originally announced April 2020.

Mean Gradient Descent: An optimization approach for single-shot interferogram analysis

Authors: Sunaina, Mansi Butola, Kedar Khare

Abstract: Complex object wave recovery from single-shot interference pattern is an important practical problem in interferometry and digital holography. The most popular single-shot interferogram analysis method involves Fourier filtering of cross-term but this method suffers from poor resolution. For obtaining full pixel resolution, it is necessary to model the object wave recovery as an optimization probl… ▽ More Complex object wave recovery from single-shot interference pattern is an important practical problem in interferometry and digital holography. The most popular single-shot interferogram analysis method involves Fourier filtering of cross-term but this method suffers from poor resolution. For obtaining full pixel resolution, it is necessary to model the object wave recovery as an optimization problem. The optimization approach typically involves minimizing a cost function consisting of a data consistency term and one or more constraint terms. Despite its potential performance advantages, this method is not used widely due to several tedious and difficult tasks such as empirical tuning of free parameters. We introduce a new optimization approach Mean gradient descent (MGD) for single-shot interferogram analysis that is simple to implement, robust and does not require any free parameters. The MGD iteration does not try to achieve minimization of any cost function but instead aims to reach a solution point where the data consistency and the constraint terms balance each other. This is achieved by iteratively progressing the solution in the direction that bisects the descent directions associated with the error and constraint terms. Numerical illustrations are shown for recovery of a step phase object from its corresponding off-axis as well as on-axis interferograms simulated with multiple noise levels. Our results show full pixel resolution as evident from the recovery of phase step and excellent rms phase accuracy relative to the ground truth phase map. The concept of MGD as presented here can potentially find applications to wider class of optimization problems. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Phase retrieval with complexity guidance

Authors: Mansi Butola, Sunaina, Kedar Khare

Abstract: Iterative phase retrieval methods based on the Gerchberg-Saxton (GS) or Fienup algorithm require a large number of iterations to converge to a meaningful solution. For complex-valued or phase objects, these approaches also suffer from stagnation problems where the solution does not change much from iteration to iteration but the resultant solution shows artifacts such as presence of a twin. We int… ▽ More Iterative phase retrieval methods based on the Gerchberg-Saxton (GS) or Fienup algorithm require a large number of iterations to converge to a meaningful solution. For complex-valued or phase objects, these approaches also suffer from stagnation problems where the solution does not change much from iteration to iteration but the resultant solution shows artifacts such as presence of a twin. We introduce a complexity parameter $ζ$ that can be computed directly from the Fourier magnitude data and provides a measure of fluctuations in the desired phase retrieval solution. It is observed that when initiated with a uniformly random phase map, the complexity of the Fienup solution containing stagnation artifacts stabilizes at a numerical value that is much higher than $ζ$. We propose a modified Fienup algorithm that uses a controlled sparsity enhancing step such that in every iteration the complexity of the resulting solution is explicitly made close to $ζ$. This approach which we refer to as complexity guided phase retrieval (CGPR) is seen to significantly reduce the number of phase retrieval iterations required for convergence to a meaningful solution and automatically addresses the stagnation problems. The CGPR methodology can enable new applications of iterative phase retrieval that are considered practically difficult due to large number of iterations required for a reliable phase recovery. △ Less

Submitted 17 September, 2018; originally announced September 2018.