-
Estimating Dynamic Soft Continuum Robot States From Boundaries
Authors:
Tongjia Zheng,
Jessica Burgner-Kahrs
Abstract:
Accurate state estimation is essential for effective control of robots. For soft robots, this task is particularly challenging because their states are inherently infinite-dimensional functions due to the robots' continuous deformability. Traditional sensing techniques, however, can only provide discrete measurements. Recently, a dynamic state estimation method known as a boundary observer was int…
▽ More
Accurate state estimation is essential for effective control of robots. For soft robots, this task is particularly challenging because their states are inherently infinite-dimensional functions due to the robots' continuous deformability. Traditional sensing techniques, however, can only provide discrete measurements. Recently, a dynamic state estimation method known as a boundary observer was introduced, which leverages Cosserat rod theory to recover all infinite-dimensional states by measuring only the velocity twist at the robot's tip. In this work, we present a novel boundary observer that can also recover infinite-dimensional dynamic states, but instead relies on measuring the internal wrench at the robot's base. This design exploits the duality between the velocity twist at the tip and the internal wrench at the base, with both types of boundary observers being inspired by principles of energy dissipation. Despite the mathematical duality, the proposed approach offers a distinct advantage: it requires only a 6-axis force/torque sensor embedded at the base, eliminating the need for external sensing systems such as motion capture cameras. Moreover, combining both tip- and base-based techniques enhances energy dissipation, accelerates convergence, and improves estimation accuracy. We validate the proposed algorithms through both simulation studies and experiments based on tendon-driven continuum robots. Our results demonstrate that all boundary observers converge to the ground truth within 3 seconds, even with significantly deviated initial conditions. Furthermore, they recover from unknown perturbations and effectively track high-frequency vibrations. We also show that combining the dual techniques further improves convergence speed and accuracy. Finally, the computational efficiency of these algorithms indicates their feasibility for real-time state estimation.
△ Less
Submitted 7 May, 2025;
originally announced May 2025.
-
Toward Dynamic Control of Tendon-Driven Continuum Robots using Clarke Transform
Authors:
Christian Muhmann,
Reinhard M. Grassmann,
Max Bartholdt,
Jessica Burgner-Kahrs
Abstract:
In this paper, we propose a dynamic model and control framework for tendon-driven continuum robots with multiple segments and an arbitrary number of tendons per segment. Our approach leverages the Clarke transform, the Euler-Lagrange formalism, and the piecewise constant curvature assumption to formulate a dynamic model on a two-dimensional manifold embedded in the joint space that inherently sati…
▽ More
In this paper, we propose a dynamic model and control framework for tendon-driven continuum robots with multiple segments and an arbitrary number of tendons per segment. Our approach leverages the Clarke transform, the Euler-Lagrange formalism, and the piecewise constant curvature assumption to formulate a dynamic model on a two-dimensional manifold embedded in the joint space that inherently satisfies tendon constraints. We present linear controllers that operate directly on this manifold, along with practical methods for preventing negative tendon forces without compromising control fidelity. We validate these approaches in simulation and on a physical prototype with one segment and five tendons, demonstrating accurate dynamic behavior and robust trajectory tracking under real-time conditions.
△ Less
Submitted 26 March, 2025;
originally announced March 2025.
-
Displacement-Actuated Continuum Robots: A Joint Space Abstraction
Authors:
Reinhard M. Grassmann,
Jessica Burgner-Kahrs
Abstract:
The displacement-actuated continuum robot as an abstraction has been shown as a key abstraction to significantly simplify and improve approaches due to its relation to the Clarke transform. To highlight further potentials, we revisit and extend this abstraction that features an increasingly popular length extension and an underutilized twisting. For each extension, the corresponding mapping from t…
▽ More
The displacement-actuated continuum robot as an abstraction has been shown as a key abstraction to significantly simplify and improve approaches due to its relation to the Clarke transform. To highlight further potentials, we revisit and extend this abstraction that features an increasingly popular length extension and an underutilized twisting. For each extension, the corresponding mapping from the joint values to the local coordinates of the manifold embedded in the joint spaces is provided. Each mapping is characterized by its compactness and linearity.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
Clarke Coordinates Are Generalized Improved State Parametrization for Continuum Robots
Authors:
Reinhard M. Grassmann,
Jessica Burgner-Kahrs
Abstract:
In this letter, we demonstrate that previously proposed improved state parameterizations for soft and continuum robots are specific cases of Clarke coordinates. By explicitly deriving these improved parameterizations from a generalized Clarke transformation matrix, we unify various approaches into one comprehensive mathematical framework. This unified representation provides clarity regarding thei…
▽ More
In this letter, we demonstrate that previously proposed improved state parameterizations for soft and continuum robots are specific cases of Clarke coordinates. By explicitly deriving these improved parameterizations from a generalized Clarke transformation matrix, we unify various approaches into one comprehensive mathematical framework. This unified representation provides clarity regarding their relationships and generalizes them beyond existing constraints, including arbitrary joint numbers, joint distributions, and underlying modeling assumptions. This unification consolidates prior insights and establishes Clarke coordinates as a foundational tool, enabling systematic knowledge transfer across different subfields within soft and continuum robotics.
△ Less
Submitted 15 March, 2025;
originally announced March 2025.
-
Using Clarke Transform to Create a Framework on the Manifold: From Sampling via Trajectory Generation to Control
Authors:
Reinhard M. Grassmann,
Jessica Burgner-Kahrs
Abstract:
We present a framework based on Clarke coordinates for spatial displacement-actuated continuum robots with an arbitrary number of joints. This framework consists of three modular components, i.e., a planner, trajectory generator, and controller defined on the manifold. All components are computationally efficient, compact, and branchless, and an encoder can be used to interface existing framework…
▽ More
We present a framework based on Clarke coordinates for spatial displacement-actuated continuum robots with an arbitrary number of joints. This framework consists of three modular components, i.e., a planner, trajectory generator, and controller defined on the manifold. All components are computationally efficient, compact, and branchless, and an encoder can be used to interface existing framework components that are not based on Clarke coordinates. We derive the relationship between the kinematic constraints in the joint space and on the manifold to generate smooth trajectories on the manifold. Furthermore, we establish the connection between the displacement constraint and parallel curves. To demonstrate its effectiveness, a demonstration in simulation for a displacement-actuated continuum robot with four segments is presented.
△ Less
Submitted 6 February, 2025; v1 submitted 20 December, 2024;
originally announced December 2024.
-
Clarke Transform and Encoder-Decoder Architecture for Arbitrary Joints Locations in Displacement-Actuated Continuum Robots
Authors:
Reinhard M. Grassmann,
Jessica Burgner-Kahrs
Abstract:
In this paper, we consider an arbitrary number of joints and their arbitrary joint locations along the center line of a displacement-actuated continuum robot. To achieve this, we revisit the derivation of the Clarke transform leading to a formulation capable of considering arbitrary joint locations. The proposed modified Clarke transform opens new opportunities in mechanical design and algorithmic…
▽ More
In this paper, we consider an arbitrary number of joints and their arbitrary joint locations along the center line of a displacement-actuated continuum robot. To achieve this, we revisit the derivation of the Clarke transform leading to a formulation capable of considering arbitrary joint locations. The proposed modified Clarke transform opens new opportunities in mechanical design and algorithmic approaches beyond the current limiting dependency on symmetric arranged joint locations. By presenting an encoder-decoder architecture based on the Clarke transform, joint values between different robot designs can be transformed enabling the use of an analogous robot design and direct knowledge transfer. To demonstrate its versatility, applications of control and trajectory generation in simulation are presented, which can be easily integrated into an existing framework designed, for instance, for three symmetric arranged joints.
△ Less
Submitted 30 January, 2025; v1 submitted 20 December, 2024;
originally announced December 2024.
-
Clarke Transform -- A Fundamental Tool for Continuum Robotics
Authors:
Reinhard Grassmann,
Anastasiia Senyk,
Jessica Burgner-Kahrs
Abstract:
This article introduces the Clarke transform and Clarke coordinates, which present a solution to the disengagement of an arbitrary number of coupled displacement actuation of continuum and soft robots. The Clarke transform utilizes the generalized Clarke transformation and its inverse to reduce any number of joint values to a two-dimensional space without sacrificing any significant information. T…
▽ More
This article introduces the Clarke transform and Clarke coordinates, which present a solution to the disengagement of an arbitrary number of coupled displacement actuation of continuum and soft robots. The Clarke transform utilizes the generalized Clarke transformation and its inverse to reduce any number of joint values to a two-dimensional space without sacrificing any significant information. This space is the manifold of the joint space and is described by two orthogonal Clarke coordinates. Application to kinematics, sampling, and control are presented. By deriving the solution to the previously unknown forward robot-dependent mapping for an arbitrary number of joints, the forward and inverse kinematics formulations are branchless, closed-form, and singular-free. Sampling is used as a proxy for gauging the performance implications for various methods and frameworks, leading to a branchless, closed-form, and vectorizable sampling method with a 100 percent success rate and the possibility to shape desired distributions. Due to the utilization of the manifold, the fairly simple constraint-informed, two-dimensional, and linear controller always provides feasible control outputs. On top of that, the relations to improved representations in continuum and soft robotics are established, where the Clarke coordinates are their generalizations.
The Clarke transform offers valuable geometric insights and paves the way for developing approaches directly on the two-dimensional manifold within the high-dimensional joint space, ensuring compliance with the constraint. While being an easy-to-construct linear map, the proposed Clarke transform is mathematically consistent, physically meaningful, as well as interpretable and contributes to the unification of frameworks across continuum and soft robots.
△ Less
Submitted 24 September, 2024;
originally announced September 2024.
-
Clarke Transform and Clarke Coordinates -- A New Kid on the Block for State Representation of Continuum Robots
Authors:
Reinhard M. Grassmann,
Jessica Burgner-Kahrs
Abstract:
For almost all tendon-driven continuum robots, a segment is actuated by three or four tendons constrained by its mechanical design. For both cases, methods to account for the constraints are known. However, for an arbitrary number of tendons, a disentanglement method has yet to be formulated. Motivated by this unsolved general case, we explored state representations and exploited the two-dimension…
▽ More
For almost all tendon-driven continuum robots, a segment is actuated by three or four tendons constrained by its mechanical design. For both cases, methods to account for the constraints are known. However, for an arbitrary number of tendons, a disentanglement method has yet to be formulated. Motivated by this unsolved general case, we explored state representations and exploited the two-dimensional manifold. We found that the Clarke transformation, a mathematical transformation used in vector control, can be generalized to address this problem. We present the Clarke transform and Clarke coordinates, which can be used to overcome the troublesome interdependency between the tendons, simplify modeling, and unify different improved state representations. Further connection to arc parameters leads to the possibility to derive more generalizable approaches applicable to a wider range of robot types.
△ Less
Submitted 20 September, 2024;
originally announced September 2024.
-
Universal-jointed Tendon-driven Continuum Robot: Design, Kinematic Modeling, and Locomotion in Narrow Tubes
Authors:
Chengnan Shentu,
Jessica Burgner-Kahrs
Abstract:
Tendon-driven Continuum Robots (TDCRs) are promising candidates for applications in confined spaces due to their unique shape, compliance, and miniaturization capability. Non-parallel tendon routing for TDCRs have shown definite advantages including segments with higher degrees of freedom, larger workspace and higher dexterity. However, most works have focused on parallel tendons to achieve consta…
▽ More
Tendon-driven Continuum Robots (TDCRs) are promising candidates for applications in confined spaces due to their unique shape, compliance, and miniaturization capability. Non-parallel tendon routing for TDCRs have shown definite advantages including segments with higher degrees of freedom, larger workspace and higher dexterity. However, most works have focused on parallel tendons to achieve constant-curvature shapes, which yields analytically simple kinematics but overly restricts the design possibilities. We believe this under-utilization of general tendon routing can be attributed to the lack of a general kinematic model that estimates shape from only tendon geometry and displacements. Cosserat rod-based models are capable of modeling general tendon routing, but they require accurate tendon tension measurements and extensive system identification, hindering their usability for design purposes. Recent attempts in developing a kinematic model are limited to simple scenarios like actuation with a single tendon or tendons on perpendicular planes. Moreover, model formulations are often disconnected from hardware, making designs challenging to build under manufacturing constraints. Our first contribution is a novel design for TDCRs based on a synovial universal joint module, which provides a mechanically discretized and feasible design space. Based on the design, our second contribution is the formulation and evaluation of an optimization-based kinematic model, capable of handling actuation of multiple general routed tendons. Lastly, we present an example application of a TDCR designed for gaited locomotion, demonstrating our method's potential for an unified model-based design pipeline.
△ Less
Submitted 19 September, 2024;
originally announced September 2024.
-
Space-Time Continuum: Continuous Shape and Time State Estimation for Flexible Robots
Authors:
Spencer Teetaert,
Sven Lilge,
Jessica Burgner-Kahrs,
Timothy D. Barfoot
Abstract:
This extended abstract introduces a novel method for continuous state estimation of continuum robots. We formulate the estimation problem as a factor-graph optimization problem using a novel Gaussian-process prior that is parameterized over both arclength and time. We use this to introduce the first continuous-time-and-space state estimation method for continuum robots.
This extended abstract introduces a novel method for continuous state estimation of continuum robots. We formulate the estimation problem as a factor-graph optimization problem using a novel Gaussian-process prior that is parameterized over both arclength and time. We use this to introduce the first continuous-time-and-space state estimation method for continuum robots.
△ Less
Submitted 18 September, 2024;
originally announced September 2024.
-
A Non-Linear Model Predictive Task-Space Controller Satisfying Shape Constraints for Tendon-Driven Continuum Robots
Authors:
Maximillian Hachen,
Chengnan Shentu,
Sven Lilge,
Jessica Burgner-Kahrs
Abstract:
Tendon-Driven Continuum Robots (TDCRs) have the potential to be used in minimally invasive surgery and industrial inspection, where the robot must enter narrow and confined spaces. We propose a Model Predictive Control (MPC) approach to leverage the non-linear kinematics and redundancy of TDCRs for whole-body collision avoidance, with real-time capabilities for handling inputs at 30Hz. Key to our…
▽ More
Tendon-Driven Continuum Robots (TDCRs) have the potential to be used in minimally invasive surgery and industrial inspection, where the robot must enter narrow and confined spaces. We propose a Model Predictive Control (MPC) approach to leverage the non-linear kinematics and redundancy of TDCRs for whole-body collision avoidance, with real-time capabilities for handling inputs at 30Hz. Key to our method's effectiveness is the integration of a nominal Piecewise Constant Curvature (PCC) model for efficient computation of feasible trajectories, with a local feedback controller to handle modeling uncertainty and disturbances. Our experiments in simulation show that our MPC outperforms conventional Jacobian-based controller in position tracking, particularly under disturbances and user-defined shape constraints, while also allowing the incorporation of control limits. We further validate our method on a hardware prototype, showcasing its potential for enhancing the safety of teleoperation tasks.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
Towards Contact-Aided Motion Planning for Tendon-Driven Continuum Robots
Authors:
Priyanka Rao,
Oren Salzman,
Jessica Burgner-Kahrs
Abstract:
Tendon-driven continuum robots (TDCRs), with their flexible backbones, offer the advantage of being used for navigating complex, cluttered environments. However, to do so, they typically require multiple segments, often leading to complex actuation and control challenges. To this end, we propose a novel approach to navigate cluttered spaces effectively for a single-segment long TDCR which is the s…
▽ More
Tendon-driven continuum robots (TDCRs), with their flexible backbones, offer the advantage of being used for navigating complex, cluttered environments. However, to do so, they typically require multiple segments, often leading to complex actuation and control challenges. To this end, we propose a novel approach to navigate cluttered spaces effectively for a single-segment long TDCR which is the simplest topology from a mechanical point of view. Our key insight is that by leveraging contact with the environment we can achieve multiple curvatures without mechanical alterations to the robot. Specifically, we propose a search-based motion planner for a single-segment TDCR. This planner, guided by a specially designed heuristic, discretizes the configuration space and employs a best-first search. The heuristic, crucial for efficient navigation, provides an effective cost-to-go estimation while respecting the kinematic constraints of the TDCR and environmental interactions. We empirically demonstrate the efficiency of our planner-testing over 525 queries in environments with both convex and non-convex obstacles, our planner is demonstrated to have a success rate of about 80% while baselines were not able to obtain a success rate higher than 30%. The difference is attributed to our novel heuristic which is shown to significantly reduce the required search space.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
On the Disentanglement of Tube Inequalities in Concentric Tube Continuum Robots
Authors:
Reinhard M. Grassmann,
Anastasiia Senyk,
Jessica Burgner-Kahrs
Abstract:
Concentric tube continuum robots utilize nested tubes, which are subject to a set of inequalities. Current approaches to account for inequalities rely on branching methods such as if-else statements. It can introduce discontinuities, may result in a complicated decision tree, has a high wall-clock time, and cannot be vectorized. This affects the behavior and result of downstream methods in control…
▽ More
Concentric tube continuum robots utilize nested tubes, which are subject to a set of inequalities. Current approaches to account for inequalities rely on branching methods such as if-else statements. It can introduce discontinuities, may result in a complicated decision tree, has a high wall-clock time, and cannot be vectorized. This affects the behavior and result of downstream methods in control, learning, workspace estimation, and path planning, among others.
In this paper, we investigate a mapping to mitigate branching methods. We derive a lower triangular transformation matrix to disentangle the inequalities and provide proof for the unique existence. It transforms the interdependent inequalities into independent box constraints. Further investigations are made for sampling, control, and workspace estimation. Approaches utilizing the proposed mapping are at least 14 times faster (up to 176 times faster), generate always valid joint configurations, are more interpretable, and are easier to extend.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
State Estimation for Continuum Multi-Robot Systems on SE(3)
Authors:
Sven Lilge,
Timothy D. Barfoot,
Jessica Burgner-Kahrs
Abstract:
In contrast to conventional robots, accurately modeling the kinematics and statics of continuum robots is challenging due to partially unknown material properties, parasitic effects, or unknown forces acting on the continuous body. Consequentially, state estimation approaches that utilize additional sensor information to predict the shape of continuum robots have garnered significant interest. Thi…
▽ More
In contrast to conventional robots, accurately modeling the kinematics and statics of continuum robots is challenging due to partially unknown material properties, parasitic effects, or unknown forces acting on the continuous body. Consequentially, state estimation approaches that utilize additional sensor information to predict the shape of continuum robots have garnered significant interest. This paper presents a novel approach to state estimation for systems with multiple coupled continuum robots, which allows estimating the shape and strain variables of multiple continuum robots in an arbitrary coupled topology. Simulations and experiments demonstrate the capabilities and versatility of the proposed method, while achieving accurate and continuous estimates for the state of such systems, resulting in average end-effector errors of 3.3 mm and 5.02° depending on the sensor setup. It is further shown, that the approach offers fast computation times of below 10 ms, enabling its utilization in quasi-static real-time scenarios with average update rates of 100-200 Hz. An open-source C++ implementation of the proposed state estimation method is made publicly available to the community.
△ Less
Submitted 2 December, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
CIDGIKc: Distance-Geometric Inverse Kinematics for Continuum Robots
Authors:
Hanna Jiamei Zhang,
Matthew Giamou,
Filip Marić,
Jonathan Kelly,
Jessica Burgner-Kahrs
Abstract:
The small size, high dexterity, and intrinsic compliance of continuum robots (CRs) make them well suited for constrained environments. Solving the inverse kinematics (IK), that is finding robot joint configurations that satisfy desired position or pose queries, is a fundamental challenge in motion planning, control, and calibration for any robot structure. For CRs, the need to avoid obstacles in t…
▽ More
The small size, high dexterity, and intrinsic compliance of continuum robots (CRs) make them well suited for constrained environments. Solving the inverse kinematics (IK), that is finding robot joint configurations that satisfy desired position or pose queries, is a fundamental challenge in motion planning, control, and calibration for any robot structure. For CRs, the need to avoid obstacles in tightly confined workspaces greatly complicates the search for feasible IK solutions. Without an accurate initialization or multiple re-starts, existing algorithms often fail to find a solution. We present CIDGIKc (Convex Iteration for Distance-Geometric Inverse Kinematics for Continuum Robots), an algorithm that solves these nonconvex feasibility problems with a sequence of semidefinite programs whose objectives are designed to encourage low-rank minimizers. CIDGIKc is enabled by a novel distance-geometric parameterization of constant curvature segment geometry for CRs with extensible segments. The resulting IK formulation involves only quadratic expressions and can efficiently incorporate a large number of collision avoidance constraints. Our experimental results demonstrate >98% solve success rates within complex, highly cluttered environments which existing algorithms cannot account for.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Open Continuum Robotics -- One Actuation Module to Create them All
Authors:
Reinhard M. Grassmann,
Chengnan Shentu,
Taqi Hamoda,
Puspita Triana Dewi,
Jessica Burgner-Kahrs
Abstract:
Experiments on physical continuum robot are the gold standard for evaluations. Currently, as no commercial continuum robot platform is available, a large variety of early-stage prototypes exists. These prototypes are developed by individual research groups and are often used for a single publication. Thus, a significant amount of time is devoted to creating proprietary hardware and software hinder…
▽ More
Experiments on physical continuum robot are the gold standard for evaluations. Currently, as no commercial continuum robot platform is available, a large variety of early-stage prototypes exists. These prototypes are developed by individual research groups and are often used for a single publication. Thus, a significant amount of time is devoted to creating proprietary hardware and software hindering the development of a common platform, and shifting away scarce time and efforts from the main research challenges.
We address this problem by proposing an open-source actuation module, which can be used to build different types of continuum robots. It consists of a high-torque brushless electric motor, a high resolution optical encoder, and a low-gear-ratio transmission. For this letter, we create three different types of continuum robots. In addition, we illustrate, for the first time, that continuum robots built with our actuation module can proprioceptively detect external forces. Consequently, our approach opens untapped and under-investigated research directions related to the dynamics and advanced control of continuum robots, where sensing the generalized flow and effort is mandatory. Besides that, we democratize continuum robots research by providing open-source software and hardware with our initiative called the Open Continuum Robotics Project, to increase the accessibility and reproducibility of advanced methods.
△ Less
Submitted 22 February, 2024; v1 submitted 24 April, 2023;
originally announced April 2023.
-
MoSS: Monocular Shape Sensing for Continuum Robots
Authors:
Chengnan Shentu,
Enxu Li,
Chaojun Chen,
Puspita Triana Dewi,
David B. Lindell,
Jessica Burgner-Kahrs
Abstract:
Continuum robots are promising candidates for interactive tasks in medical and industrial applications due to their unique shape, compliance, and miniaturization capability. Accurate and real-time shape sensing is essential for such tasks yet remains a challenge. Embedded shape sensing has high hardware complexity and cost, while vision-based methods require stereo setup and struggle to achieve re…
▽ More
Continuum robots are promising candidates for interactive tasks in medical and industrial applications due to their unique shape, compliance, and miniaturization capability. Accurate and real-time shape sensing is essential for such tasks yet remains a challenge. Embedded shape sensing has high hardware complexity and cost, while vision-based methods require stereo setup and struggle to achieve real-time performance. This paper proposes the first eye-to-hand monocular approach to continuum robot shape sensing. Utilizing a deep encoder-decoder network, our method, MoSSNet, eliminates the computation cost of stereo matching and reduces requirements on sensing hardware. In particular, MoSSNet comprises an encoder and three parallel decoders to uncover spatial, length, and contour information from a single RGB image, and then obtains the 3D shape through curve fitting. A two-segment tendon-driven continuum robot is used for data collection and testing, demonstrating accurate (mean shape error of 0.91 mm, or 0.36% of robot length) and real-time (70 fps) shape sensing on real-world data. Additionally, the method is optimized end-to-end and does not require fiducial markers, manual segmentation, or camera calibration. Code and datasets will be made available at https://github.com/ContinuumRoboticsLab/MoSSNet.
△ Less
Submitted 27 June, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Continuum Robot State Estimation Using Gaussian Process Regression on $SE(3)$
Authors:
Sven Lilge,
Timothy D. Barfoot,
Jessica Burgner-Kahrs
Abstract:
Continuum robots have the potential to enable new applications in medicine, inspection, and countless other areas due to their unique shape, compliance, and size. Excellent progess has been made in the mechanical design and dynamic modelling of continuum robots, to the point that there are some canonical designs, although new concepts continue to be explored. In this paper, we turn to the problem…
▽ More
Continuum robots have the potential to enable new applications in medicine, inspection, and countless other areas due to their unique shape, compliance, and size. Excellent progess has been made in the mechanical design and dynamic modelling of continuum robots, to the point that there are some canonical designs, although new concepts continue to be explored. In this paper, we turn to the problem of state estimation for continuum robots that can been modelled with the common Cosserat rod model. Sensing for continuum robots might comprise external camera observations, embedded tracking coils or strain gauges. We repurpose a Gaussian process (GP) regression approach to state estimation, initially developed for continuous-time trajectory estimation in $SE(3)$. In our case, the continuous variable is not time but arclength and we show how to estimate the continuous shape (and strain) of the robot (along with associated uncertainties) given discrete, noisy measurements of both pose and strain along the length. We demonstrate our approach quantitatively through simulations as well as through experiments. Our evaluations show that accurate and continuous estimates of a continuum robot's shape can be achieved, resulting in average end-effector errors between the estimated and ground truth shape as low as 3.5mm and 0.016$^\circ$ in simulation or 3.3mm and 0.035$^\circ$ for unloaded configurations and 6.2mm and 0.041$^\circ$ for loaded ones during experiments, when using discrete pose measurements.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Making Sense of the Robotized Pandemic Response: A Comparison of Global and Canadian Robot Deployments and Success Factors
Authors:
T. Barfoot,
J. Burgner-Kahrs,
E. Diller,
A. Garg,
A. Goldenberg,
J. Kelly,
X. Liu,
H. E. Naguib,
G. Nejat,
A. P. Schoellig,
F. Shkurti,
H. Siegel,
Y. Sun,
S. L. Waslander,
.
Abstract:
From disinfection and remote triage, to logistics and delivery, countries around the world are making use of robots to address the unique challenges presented by the COVID-19 pandemic. Robots are being used to manage the pandemic in Canada too, but relative to other regions, we have been more cautious in our adoption -- this despite the important role that robots of Canadian origin are now playing…
▽ More
From disinfection and remote triage, to logistics and delivery, countries around the world are making use of robots to address the unique challenges presented by the COVID-19 pandemic. Robots are being used to manage the pandemic in Canada too, but relative to other regions, we have been more cautious in our adoption -- this despite the important role that robots of Canadian origin are now playing on the global stage. This white paper discusses why this is the case, and argues that strategic investment and support for the Canadian robotics industry are urgently needed to bring the benefits of robotics home, where we have more control in shaping the future of this game-changing technology. Such investments will not only serve to support Canada's current pandemic response and post pandemic recovery, but will also prepare this country to weather future crises. Without such support, Canada risks falling behind other developed nations that are investing heavily in hardware automation at this time.
△ Less
Submitted 21 September, 2020; v1 submitted 17 September, 2020;
originally announced September 2020.
