-
Triboelectric Pixels as building blocks for microscale and large area integration of drop energy harvesters
Authors:
Ali Ghaffarinejad,
Xabier Garcia-Casas,
Fernando Nunez-Galvez,
Jorge Budagosky,
Vanda Godinho,
Carmen Lopez-Santos,
Juan Ramon Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, wher…
▽ More
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, where triboelectric nanogenerators have been revealed as the most promising relevant actors. However, despite widespread attempts by researchers, the drop energy harvesters' output power is still low, mainly because of the limitations in candidates endowed with ideal triboelectric and wetting properties and also the non-optimal and centimetre-scale device architecture that prevents the conversion of the complete kinetic energy of impinging drops. Herein, we disclose a microscale triboelectric nanogenerator that can harvest a high density of electrical power from drops through a single, submillisecond, long-lasting step. The mechanism relies on an instantaneous electrical capacitance variation owing to the high-speed contact of the drops with the electrodes' active area. We discuss the role of the precharged effect of the triboelectric surface in the time characteristic of the conversion event. The capacitive and microscale structure of the device is endowed with a small form factor that allows for the production of densely packed arrays. The proposed architecture can be adjusted to different liquids and scales and is compatible with a variety of triboelectric surfaces, including flexible, transparent, and thin-film approaches.
△ Less
Submitted 15 August, 2024; v1 submitted 3 May, 2024;
originally announced May 2024.
-
Paper-based ZnO self-powered sensors and nanogenerators by plasma technology
Authors:
Xabier Garcia-Casas,
Francisco J. Aparicio,
Jorge Budagosky,
Ali Ghaffarinejad,
Noel Orozco-Corrales,
Kostya,
Ostrikov,
Juan R. Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
Nanogenerators and self-powered nanosensors have shown the potential to power low-consumption electronics and human-machine interfaces, but their practical implementation requires reliable, environmentally friendly and scalable, processes for manufacturing and processing. This article presents a plasma synthesis approach for the fabrication of piezoelectric nanogenerators (PENGs) and self-powered…
▽ More
Nanogenerators and self-powered nanosensors have shown the potential to power low-consumption electronics and human-machine interfaces, but their practical implementation requires reliable, environmentally friendly and scalable, processes for manufacturing and processing. This article presents a plasma synthesis approach for the fabrication of piezoelectric nanogenerators (PENGs) and self-powered sensors on paper substrates. Polycrystalline ZnO nanocolumnar thin films are deposited by plasma-enhanced chemical vapour deposition on common paper supports using a microwave electron cyclotron resonance reactor working at room temperature yielding high growth rates and low structural and interfacial stresses. Applying Kinetic Monte Carlo simulation, we elucidate the basic shadowing mechanism behind the characteristic microstructure and porosity of the ZnO thin films, relating them to an enhanced piezoelectric response to periodic and random inputs. The piezoelectric devices are assembled by embedding the ZnO films in PMMA and using Au electrodes in two different configurations: laterally and vertically contacted devices. We present the response of the laterally connected devices as a force sensor for low-frequency events with different answers to the applied force depending on the impedance circuit, i.e. load values range, a behaviour that is theoretically analyzed. The vertical devices reach power densities as high as 80 nW/cm2 with a mean power output of 20 nW/cm2. We analyze their actual-scenario performance by activation with a fan and handwriting. Overall, this work demonstrates the advantages of implementing plasma deposition for piezoelectric films to develop robust, flexible, stretchable, and enhanced-performance nanogenerators and self-powered piezoelectric sensors compatible with inexpensive and recyclable supports
△ Less
Submitted 21 July, 2023; v1 submitted 7 May, 2023;
originally announced May 2023.
-
Coarse-grained approach to amorphous and anisotropic materials in Kinetic Monte Carlo thin-films growth simulations: a case study of TiO2 and ZnO by Plasma Enhanced Chemical Vapor Deposition
Authors:
Jorge Budagosky,
Xabier Garcia-Casas,
Juan R. Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
The growth of amorphous TiO2 and anisotropic-polycrystalline ZnO thin-films is studied by means of coarse-grained three-dimensional kinetic Montecarlo simulations under conditions typically encountered in Plasma Enhanced Chemical Vapor Deposition experiments. The approach developed considers fluctuations in the activation energy for surface diffusion of the coarse particles that are calculated on-…
▽ More
The growth of amorphous TiO2 and anisotropic-polycrystalline ZnO thin-films is studied by means of coarse-grained three-dimensional kinetic Montecarlo simulations under conditions typically encountered in Plasma Enhanced Chemical Vapor Deposition experiments. The approach developed considers fluctuations in the activation energy for surface diffusion of the coarse particles that are calculated on-the-fly and depends on the mesoscale local morphological/structural landscape. The basis of this approach --which is known to work well to simulate the growth of amorphous materials using a much simpler cubic grid-- has been extended in this work to reproduce not only the morphological characteristics and scaling properties of amorphous TiO2 but also the growth of polycrystalline ZnO with a good approximation, including the evolution of the film texture and textured-grain competition during growth and its dependence on experimental conditions. The results of the simulations have been compared with available experimental data obtained by X-Ray Diffraction, analysis of the texture coefficients, Atomic Force Microscopy and Scanning Electron Microscopy
△ Less
Submitted 11 October, 2021; v1 submitted 27 August, 2021;
originally announced August 2021.
-
An all-electron product-basis set: application to plasmon anisotropy in simple metals
Authors:
J. A. Budagosky,
E. E. Krasovskii
Abstract:
An efficient basis set for products of all-electron wave functions is proposed, which comprises plane waves defined over the entire unit cell and orbitals confined to small non-overlapping spheres. The size of the set and the basis functions are, in principle, independent of the computational parameters of the band structure method. The approach is implemented in the extended LAPW method, and its…
▽ More
An efficient basis set for products of all-electron wave functions is proposed, which comprises plane waves defined over the entire unit cell and orbitals confined to small non-overlapping spheres. The size of the set and the basis functions are, in principle, independent of the computational parameters of the band structure method. The approach is implemented in the extended LAPW method, and its properties and accuracy are discussed. The method is applied to analyze the dielectric response of the simple metals Al, Na, Li, K, Rb, and Cs with a focus on the origin of the anisotropy of the plasmon dispersion in Al and Na. The anisotropy is traced to tiny structures of the one-particle excitation spectra of Al and Na, and relevant experimental observations are explained.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Cross-section geometry effects in the subband structure and spin-related properties of a HgTe/CdTe nanowire
Authors:
Jorge A. Budagosky
Abstract:
By means of a multiband effective mass Hamiltonian, a theoretical characterization of the effect of the geometrical features of the confinement profile --in particular, a longitudinal groove-- on the subbands dispersion and spin-related properties of a rectangular HgTe/CdTe nanowire is presented. Through an external electric field applied perpendicular to the wire, the interplay of the induced Ras…
▽ More
By means of a multiband effective mass Hamiltonian, a theoretical characterization of the effect of the geometrical features of the confinement profile --in particular, a longitudinal groove-- on the subbands dispersion and spin-related properties of a rectangular HgTe/CdTe nanowire is presented. Through an external electric field applied perpendicular to the wire, the interplay of the induced Rashba spin splitting and these geometrical features is investigated. It is found that by exploiting this interplay a rich complexity of the subband structure arises, permitting the generation and modulation of spin-polarized currents without magnetic fields.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Optical properties of wurtzite GaN/AlN quantum dots grown on non-polar planes: the effect of stacking faults in the reduction of the internal electric field
Authors:
J. A. Budagosky,
N. Garro,
A. Cros,
A. García-Cristóbal,
S. Founta,
B. Daudin
Abstract:
The optical emission of non-polar GaN/AlN quantum dots has been investigated. The presence of stacking faults inside these quantum dots is evidenced in the dependence of the photoluminescence with temperature and excitation power. A theoretical model for the electronic structure and optical properties of non-polar quantum dots, taking into account their realistic shapes, is presented which predict…
▽ More
The optical emission of non-polar GaN/AlN quantum dots has been investigated. The presence of stacking faults inside these quantum dots is evidenced in the dependence of the photoluminescence with temperature and excitation power. A theoretical model for the electronic structure and optical properties of non-polar quantum dots, taking into account their realistic shapes, is presented which predicts a substantial reduction of the internal electric field but a persisting quantum confined Stark effect, comparable to that of polar GaN/AlN quantum dots. Modeling the effect of a 3 monolayer stacking fault inside the quantum dot, which acts as zinc-blende inclusion into the wurtzite matrix, results in an additional 30 % reduction of the internal electric field and gives a better account of the observed optical features.
△ Less
Submitted 19 January, 2016;
originally announced January 2016.
-
Shaped electric fields for fast optimal manipulation of electron spin and position in a double quantum dot
Authors:
J. A. Budagosky,
D. V. Khomitsky,
E. Ya. Sherman,
Alberto Castro
Abstract:
We use quantum optimal control theory algorithms to design external electric fields that drive the coupled spin and orbital dynamics of an electron in a double quantum dot, subject to the spin-orbit interaction and Zeeman magnetic fields. We obtain time-profiles of multi-frequency electric pulses which increase the rate of spin-flip transitions by several orders of magnitude in comparison with mon…
▽ More
We use quantum optimal control theory algorithms to design external electric fields that drive the coupled spin and orbital dynamics of an electron in a double quantum dot, subject to the spin-orbit interaction and Zeeman magnetic fields. We obtain time-profiles of multi-frequency electric pulses which increase the rate of spin-flip transitions by several orders of magnitude in comparison with monochromatic fields, where the spin Rabi oscillations were predicted to be very slow. This precise, with the accuracy higher than $10^{-4}$, and fast, at the timescale of the order of 0.1 ns, simultaneous control of the electron spin orientation and position is achieved while keeping the electron in the four lowest tunneling- and Zeeman-split levels through the duration of the pulse, facilitating high fidelity and suggesting useful applications in spintronics and quantum information devices.
△ Less
Submitted 17 December, 2015; v1 submitted 15 October, 2015;
originally announced October 2015.
-
Ultrafast single electron spin manipulation in 2D semiconductor quantum dots with optimally controlled time-dependent electric fields through spin-orbit coupling
Authors:
J. A. Budagosky,
A. Castro
Abstract:
We have studied theoretically the possibility of ultra-fast manipulation of a single electron spin in 2D semiconductor quantum dots, by means of high-frequency time-dependent electric fields. The electron spin degree of freedom is excited through spin-orbit coupling, and the procedure may be enhanced by the presence of a static magnetic field. We use quantum optimal control theory to tailor the te…
▽ More
We have studied theoretically the possibility of ultra-fast manipulation of a single electron spin in 2D semiconductor quantum dots, by means of high-frequency time-dependent electric fields. The electron spin degree of freedom is excited through spin-orbit coupling, and the procedure may be enhanced by the presence of a static magnetic field. We use quantum optimal control theory to tailor the temporal profile of the electric field in order to achieve the most effective manipulation. The scheme predicts significant control over spin operations in times of the order of picoseconds -- an ultrafast time scale that permits to avoid the effects of decoherence if this scheme is to be used as a tool for quantum information processing.
△ Less
Submitted 23 October, 2014;
originally announced October 2014.
-
Optimal control of high-harmonic generation by intense few-cycle pulses
Authors:
J. Solanpää,
J. A. Budagosky,
N. I. Shvetsov-Shilovski,
A. Castro,
A. Rubio,
E. Räsänen
Abstract:
At the core of attosecond science lies the ability to generate laser pulses of sub-femtosecond duration. In tabletop devices the process relies on high-harmonic generation, where a major challenge is to obtain high yields and high cutoff energies required for the generation of attosecond pulses. We develop a computational method that can simultaneously resolve these issues by optimizing the drivin…
▽ More
At the core of attosecond science lies the ability to generate laser pulses of sub-femtosecond duration. In tabletop devices the process relies on high-harmonic generation, where a major challenge is to obtain high yields and high cutoff energies required for the generation of attosecond pulses. We develop a computational method that can simultaneously resolve these issues by optimizing the driving pulses using quantum optimal control theory. Our target functional, an integral over the harmonic yield over a desired energy range, leads to a remarkable cutoff extension and yield enhancement for a one-dimensional model H-atom. The physical enhancement process is shown to be twofold: the cutoff extension is of classical origin, whereas the yield enhancement arises from increased tunneling probability. The scheme is directly applicable to more realistic models and, within straightforward refinements, also to experimental verification.
△ Less
Submitted 9 October, 2014; v1 submitted 23 June, 2014;
originally announced June 2014.
