Showing 1–11 of 11 results for author: Brodnik, G

Activating high-power parametric oscillation in photonic-crystal resonators

Authors: Grant M. Brodnik, Lindell M. Williams, Haixin Liu, David R. Carlson, Atasi Dan, Jennifer A. Black, Scott B. Papp

Abstract: By engineering the mode spectrum of a Kerr microresonator, we selectively activate nonlinear phase matching amongst broadband parametric gain. At threshold, optical parametric oscillators (OPOs) emerge from vacuum fluctuations in the presence of a pump laser, and above threshold, OPOs seed the formation of intraresonator patterns and states, such as chaos and solitons. These competing nonlinear pr… ▽ More By engineering the mode spectrum of a Kerr microresonator, we selectively activate nonlinear phase matching amongst broadband parametric gain. At threshold, optical parametric oscillators (OPOs) emerge from vacuum fluctuations in the presence of a pump laser, and above threshold, OPOs seed the formation of intraresonator patterns and states, such as chaos and solitons. These competing nonlinear processes hinder an important application of OPOs as wavelength-variable, low-noise sources. Recently, nanopatterned microresonator OPOs have leveraged photonic crystal bandgaps to enable universal phase matching and control of nonlinear interactions. Here, we explore a design paradigm optimized for high-output power that uses geometric dispersion to suppress nonlinear interactions and a photonic crystal bandgap to activate only a single OPO interaction. Our devices convert an input pump laser to output signal and idler waves with powers exceeding 40 mW while maintaining spectral purity and side-mode suppression ratios greater than 40 dB. We show that this approach suits custom wavelengths by measuring four independent oscillators that vary only photonic crystal parameters to select output waves. Our experiments demonstrate that microresonators functionalized by photonic crystals offer a versatile and lossless palette of controls for nonlinear laser conversion. △ Less

Submitted 10 April, 2025; originally announced April 2025.

Comments: 6 pages, 3 figure panels

Heterogeneous tantala photonic integrated circuits for sub-micron wavelength applications

Authors: Nima Nader, Eric J. Stanton, Grant M. Brodnik, Nusrat Jahan, Skyler C. Wright, Lindell M. Williams, Ali Eshaghian Dorche, Kevin L. Silverman, Sae Woo Nam, Scott B. Papp, Richard P. Mirin

Abstract: Atomic and trapped-ion systems are the backbone of a new generation of quantum-based positioning, navigation, and timing (PNT) technologies. The miniaturization of such quantum systems offers tremendous technological advantages, especially the reduction of system size, weight, and power consumption. Yet, this has been limited by the absence of compact, standalone photonic integrated circuits (PICs… ▽ More Atomic and trapped-ion systems are the backbone of a new generation of quantum-based positioning, navigation, and timing (PNT) technologies. The miniaturization of such quantum systems offers tremendous technological advantages, especially the reduction of system size, weight, and power consumption. Yet, this has been limited by the absence of compact, standalone photonic integrated circuits (PICs) at the wavelengths suitable for these instruments. Mobilizing such photonic systems requires development of fully integrated, on-chip, active components at sub-micrometer wavelengths. We demonstrate heterogeneous photonic integrated circuits operating at 980 nm based on wafer-scale bonding of InGaAs quantum well active regions to tantalum pentoxide passive components. This high-yield process provides > 95 % surface area yield and enables integration of > 1300 active components on a 76.2 mm (3 inch) silicon wafer. We present a diverse set of functions, including semiconductor optical amplifiers, Fabry-Perot lasers, and distributed feedback lasers with 43 dB side-mode suppression ratio and > 250 GHz single-mode tuning range. We test the precise wavelength control and system level functionality of the on-chip lasers by pumping optical parametric oscillation processes in microring resonators fabricated on the same platform, generating short-wavelength signals at 778 nm and 752 nm. These results provide a pathway to realize fully functional integrated photonic engines for operation of compact quantum sensors based on atomic and trapped-ion systems. △ Less

Submitted 1 January, 2025; originally announced January 2025.

Comments: 12 pages, 5 figures

Nanophotonic oscillators for laser conversion beyond an octave

Authors: Grant M. Brodnik, Haixin Liu, David R. Carlson, Jennifer A. Black, Scott B. Papp

Abstract: Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and o… ▽ More Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and often prohibitively mismatched in scalability to early quantum-based sensing and information systems. Here, we demonstrate a microresonator optical-parametric oscillator (OPO) that converts a pump laser to an output wave within a frequency span exceeding an octave. We achieve phase matching for oscillation by nanopatterning the microresonator to open a photonic-crystal bandgap on the mode of the pump laser. By adjusting the nanophotonic pattern and hence the bandgap, the ratio of output OPO wave frequency span to required pump laser tuning is more than 10,000. We also demonstrate tuning the oscillator in free-spectral-range steps, more finely with temperature, and minimal additive frequency noise of the laser-conversion process. Our work shows that nanophotonics offers control of laser conversion in microresonators, bridging phase-matching of nonlinear optics and application requirements for laser designs. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 8 pages, 3 figures

Threshold and laser-conversion in nanostructured-resonator parametric oscillators

Authors: Haixin Liu, Grant M. Brodnik, Jizhao Zang, David R. Carlson, Jennifer A. Black, Scott B. Papp

Abstract: We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to… ▽ More We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to achieve universal phase-matching for OPO-laser conversion, but coherent backscattering also induces a counterpropagating pump laser. This depletes the intra-resonator optical power in either direction, increasing the OPO threshold power and limiting laser-conversion efficiency, the ratio of optical power in target signal and idler frequencies to the pump. We develop an analytical model of this system that emphasizes an understanding of optimal laser conversion and threshold behaviors, and we use the model to guide experiments with nanostructured-resonator OPO laser-conversion circuits, fully integrated on chip and unlimited by group-velocity dispersion. Our work demonstrates the fundamental connection between OPO laser-conversion efficiency and the resonator coupling rate, subject to the relative phase and power of counterpropagating pump fields. We achieve $(40\pm4)$ mW of on-chip power, corresponding to $(41\pm4)$% conversion efficiency, and discover a path toward near-unity OPO laser conversion efficiency. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Tunable lasers with optical-parametric oscillation in photonic-crystal resonators

Authors: Jennifer A. Black, Grant Brodnik, Haixin Liu, Su-Peng Yu, David R. Carlson, Jizhao Zang, Travis C. Briles, Scott B. Papp

Abstract: By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, bu… ▽ More By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, but the principle of nonlinear conversion of a pump laser to a designed wavelength is extensible. We report on laser-wavelength access by versatile customization of optical-parametric oscillation (OPO) with a photonic-crystal resonator (PhCR). By controlling the bandgap of a PhCR, we enable OPO generation across a wavelength range of 1234-2093 nm with a 1550 nm pump and 1016-1110 nm with a 1064 nm pump. Moreover, our tunable laser platform offers pump-to-sideband conversion efficiency of >10% and negligible additive optical-frequency noise across the output range. From laser design to simulation of nonlinear dynamics, we use a Lugiato-Lefever framework that predicts the system characteristics, including bi-directional OPO generation in the PhCR and conversion efficiency in agreement with our observations. Our experiments introduce tunable lasers by design with PhCR OPOs, providing critical functionalities in integrated photonics. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Comments: 6 pages, 5 figures

36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator

Authors: Kaikai Liu, Nitesh Chauhan, Jiawei Wang, Andrei Isichenko, Grant M. Brodnik, Paul A. Morton, Ryan Behunin, Scott B. Papp, Daniel J. Blumenthal

Abstract: Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology and atomic timekeeping. These systems narrow the laser linewidth and stabilize the carrier by use of Pound-Drever-Hall (PDH) locking to a table-scale, ultra-high quality factor (Q), vacuum spaced Fabry-Perot reference cavity. Integrating these cavities,… ▽ More Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology and atomic timekeeping. These systems narrow the laser linewidth and stabilize the carrier by use of Pound-Drever-Hall (PDH) locking to a table-scale, ultra-high quality factor (Q), vacuum spaced Fabry-Perot reference cavity. Integrating these cavities, to bring characteristics of PDH stabilization to the chip-scale, is critical to reduce their size, cost, and weight, and enable a wide range of portable and system-on-chip applications. We report a significant advance in integrated laser linewidth narrowing, stabilization and noise reduction, by use of a photonic integrated 4.0-meter-long coil resonator to stabilize a semiconductor laser. We achieve a 36 Hz 1/π-integral linewidth, an Allan deviation (ADEV) of 1.8x10^{-13} at 10 ms measurement time, and a 2.3 kHz/sec drift, to the best of our knowledge the lowest integral linewidth and highest stability demonstrated for an integrated reference cavity. Two coil designs, stabilizing lasers operating at 1550 nm and 1319 nm are demonstrated. The resonator is bus coupled to a 4.0-meter-long coil, with a 49 MHz free spectral range (FSR), a mode volume of 1.0x10^{10} μm^3 and a 142 million intrinsic Q, fabricated in a CMOS compatible, ultra-low loss silicon nitride waveguide platform. Our measurements and simulations show that the thermorefractive noise floor for this particular cavity is reached for frequencies down to 20 Hz in an ambient environment with simple passive vibration isolation and without vacuum or thermal isolation. The TRN limited performance is estimated to be an 8 Hz 1/π integral linewidth and ADEV of 5x10^{-14} at 10 ms, opening a stability regime that heretofore has only been available in fundamentally un-integrated systems. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Comments: arXiv admin note: text overlap with arXiv:2107.03595

Thermal and driven noise in Brillouin Lasers

Authors: John H. Dallyn, Kaikai Liu, Mark Harrington, Grant Brodnik, Peter T. Rakich, Daniel J. Blumenthal, Ryan O. Behunin

Abstract: Owing to their highly coherent emission and compact form factor, Brillouin lasers have been identified as a valuable asset for applications including portable atomic clocks, precision sensors, coherent microwave synthesis and energy-efficient approaches to coherent communications. While the fundamental emission linewidth of these lasers can be very narrow, noise within dielectric materials leads t… ▽ More Owing to their highly coherent emission and compact form factor, Brillouin lasers have been identified as a valuable asset for applications including portable atomic clocks, precision sensors, coherent microwave synthesis and energy-efficient approaches to coherent communications. While the fundamental emission linewidth of these lasers can be very narrow, noise within dielectric materials leads to drift in the carrier frequency, posing vexing challenges for applications requiring ultra-stable emission. A unified understanding of Brillouin laser performance may provide critical insights to reach new levels of frequency stability, however existing noise models focus on only one or a few key noise sources, and do not capture the thermo-optic drift in the laser frequency produced by thermal fluctuations or absorbed power. Here, we develop a coupled mode theory of Brillouin laser dynamics that accounts for dominant forms of noise in non-crystalline systems, capturing the salient features of the frequency and intensity noise for a variety of systems. As a result, theory and experiment can be directly compared to identify key sources of noise and the frequency bands they impact, revealing strategies to improve the performance of Brillouin lasers and pave the way for highly-coherent sources of light on a chip. △ Less

Submitted 1 December, 2021; v1 submitted 19 November, 2021; originally announced November 2021.

Photonic circuits for laser stabilization with ultra-low-loss and nonlinear resonators

Authors: Kaikai Liu, John H. Dallyn, Grant M. Brodnik, Andrei Isichenko, Mark W. Harrington, Nitesh Chauhan, Debapam Bose, Paul A. Morton, Scott B. Papp, Ryan O. Behunin, Daniel J. Blumenthal

Abstract: Laser-frequency stabilization with on-chip photonic integrated circuits will provide compact, low cost solutions to realize spectrally pure laser sources. Developing high-performance and scalable lasers is critical for applications including quantum photonics, precision navigation and timing, spectroscopy, and high-capacity fiber communications. We demonstrate a significant advance in compact, sta… ▽ More Laser-frequency stabilization with on-chip photonic integrated circuits will provide compact, low cost solutions to realize spectrally pure laser sources. Developing high-performance and scalable lasers is critical for applications including quantum photonics, precision navigation and timing, spectroscopy, and high-capacity fiber communications. We demonstrate a significant advance in compact, stabilized lasers to achieve a record low integral emission linewidth and precision carrier stabilization by combining integrated waveguide nonlinear Brillouin and ultra-low loss waveguide reference resonators. Using a pair of 56.4 Million quality factor (Q) Si$_3$N$_4$ waveguide ring-resonators, we reduce the free running Brillouin laser linewidth by over an order of magnitude to 330 Hz integral linewidth and stabilize the carrier to 6.5$\times$10$^{-13}$ fractional frequency at 8 ms, reaching the cavity-intrinsic thermorefractive noise limit for frequencies down to 80 Hz. This work demonstrates the lowest linewidth and highest carrier stability achieved to date using planar, CMOS compatible photonic integrated resonators, to the best of our knowledge. These results pave the way to transfer stabilized laser technology from the tabletop to the chip-scale. This advance makes possible scaling the number of stabilized lasers and complexity of atomic and molecular experiments as well as reduced sensitivity to environmental disturbances and portable precision atomic, molecular and optical (AMO) solutions. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Optically synchronized fiber links with spectrally pure integrated lasers

Authors: Grant M. Brodnik, Mark W. Harrington, John H. Dallyn, Debapam Bose, Wei Zhang, Liron Stern, Paul A. Morton, Ryan O. Behunin, Scott B. Papp, Daniel J. Blumenthal

Abstract: Precision frequency and phase synchronization between distinct fiber interconnected nodes is critical for a wide range of applications, including atomic timekeeping, quantum networking, database synchronization, ultra-high-capacity coherent optical communications and hyper-scale data centers. Today, many of these applications utilize precision, tabletop laser systems, and would benefit from integr… ▽ More Precision frequency and phase synchronization between distinct fiber interconnected nodes is critical for a wide range of applications, including atomic timekeeping, quantum networking, database synchronization, ultra-high-capacity coherent optical communications and hyper-scale data centers. Today, many of these applications utilize precision, tabletop laser systems, and would benefit from integration in terms of reduced size, power, cost, and reliability. In this paper we report a record low 3x10^-4 rad^2 residual phase error variance for synchronization based on independent, spectrally pure, ultra-high mutual coherence, photonic integrated lasers. This performance is achieved with stimulated Brillouin scattering lasers that are stabilized to independent microcavity references, realizing sources with 30 Hz integral linewidth and a fractional frequency instability less than or equal to 2x10^-13 at 50 ms. This level of low phase noise and carrier stability enables a new type of optical-frequency-stabilized phase-locked loop (OFS-PLL) that operates with a less than 800 kHz loop bandwidth, eliminating traditional power consuming high bandwidth electronics and digital signal processors used to phase lock optical carriers. Additionally, we measure the residual phase error down to a received carrier power of -34 dBm, removing the need to transmit in-band or out-of-band synchronized carriers. These results highlight the promise for a path to spectrally pure, ultra-stable, integrated lasers for network synchronization, precision time distribution protocols, quantum-clock networks, and multiple-Terabit per second coherent DSP-free fiber-optic interconnects. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Journal ref: Nat. Photon. 15, 588-593. (2021)

Sub-Hz Linewidth Photonic-Integrated Brillouin Laser

Authors: Sarat Gundavarapu, Ryan Behunin, Grant M. Brodnik, Debapam Bose, Taran Huffman, Peter T. Rakich, Daniel J. Blumenthal

Abstract: Photonic systems and technologies traditionally relegated to table-top experiments are poised to make the leap from the laboratory to real-world applications through integration. Stimulated Brillouin scattering (SBS) lasers, through their unique linewidth narrowing properties, are an ideal candidate to create highly-coherent waveguide integrated sources. In particular, cascaded-order Brillouin las… ▽ More Photonic systems and technologies traditionally relegated to table-top experiments are poised to make the leap from the laboratory to real-world applications through integration. Stimulated Brillouin scattering (SBS) lasers, through their unique linewidth narrowing properties, are an ideal candidate to create highly-coherent waveguide integrated sources. In particular, cascaded-order Brillouin lasers show promise for multi-line emission, low-noise microwave generation and other optical comb applications. Photonic integration of these lasers can dramatically improve their stability to environmental and mechanical disturbances, simplify their packaging, and lower cost. While single-order silicon and cascade-order chalcogenide waveguide SBS lasers have been demonstrated, these lasers produce modest emission linewidths of 10-100 kHz. We report the first demonstration of a sub-Hz (~0.7 Hz) fundamental linewidth photonic-integrated Brillouin cascaded-order laser, representing a significant advancement in the state-of-the-art in integrated waveguide SBS lasers. This laser is comprised of a bus-ring resonator fabricated using an ultra-low loss Si3N4 waveguide platform. To achieve a sub-Hz linewidth, we leverage a high-Q, large mode volume, single polarization mode resonator that produces photon generated acoustic waves without phonon guiding. This approach greatly relaxes phase matching conditions between polarization modes, and optical and acoustic modes. Using a theory for cascaded-order Brillouin laser dynamics, we determine the fundamental emission linewidth of the first Stokes order by measuring the beat-note linewidth between and the relative powers of the first and third Stokes orders. Extension to the visible and near-IR wavebands is possible due to the low optical loss from 405 nm to 2350 nm, paving the way to photonic-integrated sub-Hz lasers for visible-light applications. △ Less

Submitted 27 February, 2018; originally announced February 2018.

Journal ref: nature.photon 13 (2019) 60-67

Integrated Waveguide Brillouin Laser

Authors: Sarat Gundavarapu, Matthew Puckett, Taran Huffman, Ryan Behunin, Jianfeng Wu, Tiequn Qiu, Grant M. Brodnik, Cátia Pinho, Debapam Bose, Peter T. Rakich, Jim Nohava, Karl D. Nelson, Mary Salit, Daniel J. Blumenthal

Abstract: The demand for high-performance chip-scale lasers has driven rapid growth in integrated photonics. The creation of such low-noise laser sources is critical for emerging on-chip applications, ranging from coherent optical communications, photonic microwave oscillators remote sensing and optical rotational sensors. While Brillouin lasers are a promising solution to these challenges, new strategies a… ▽ More The demand for high-performance chip-scale lasers has driven rapid growth in integrated photonics. The creation of such low-noise laser sources is critical for emerging on-chip applications, ranging from coherent optical communications, photonic microwave oscillators remote sensing and optical rotational sensors. While Brillouin lasers are a promising solution to these challenges, new strategies are needed to create robust, compact, low power and low cost Brillouin laser technologies through wafer-scale integration. To date, chip-scale Brillouin lasers have remained elusive due to the difficulties in realization of these lasers on a commercial integration platform. In this paper, we demonstrate, for the first time, monolithically integrated Brillouin lasers using a wafer-scale process based on an ultra-low loss Si3N4/SiO2 waveguide platform. Cascading of stimulated Brillouin lasing to 10 Stokes orders was observed in an integrated bus-coupled resonator with a loaded Q factor exceeding 28 million. We experimentally quantify the laser performance, including threshold, slope efficiency and cascading dynamics, and compare the results with theory. The large mode volume integrated resonator and gain medium supports a TE-only resonance and unique 2.72 GHz free spectral range, essential for high performance integrated Brillouin lasing. The laser is based on a non-acoustic guiding design that supplies a broad Brillouin gain bandwidth. Characteristics for high performance lasing are demonstrated due to large intra-cavity optical power and low lasing threshold power. Consistent laser performance is reported for multiple chips across multiple wafers. This design lends itself to wafer-scale integration of practical high-yield, highly coherent Brillouin lasers on a chip. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 15 pages, 6 figures, methods

Journal ref: nature.photon 13 (2019) 60-67