-
Local Thermal Non-Equilibrium Models in Porous Media: A Comparative Study of Conduction Effects
Authors:
Anna Mareike Kostelecky,
Ivar Stefansson,
Carina Bringedal,
Tufan Ghosh,
Helge K. Dahle,
Rainer Helmig
Abstract:
Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) mo…
▽ More
Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) models aim to describe heat transfer processes when the LTE assumption may fail. In this work, we compare three continuum-scale models from the pore to the representative elementary volume (REV) scale. Specifically, dual-network and REV-scale models are evaluated against a pore-resolved model, which we perceive as a reference in the absence of experimental results. Different effective models are used to obtain upscaled properties on the REV scale and to compare resulting temperature profiles. The systems investigated are fully saturated, consisting of one fluid and one solid phase. This study focuses on purely conductive systems without significant differences in thermal properties. Results show that LTE holds then for low interfacial resistances. However, for large interfacial resistances, solid and fluid temperatures differ. The REV-scale model with effective parameters obtained by homogenization leads to similar results as the pore-resolved model, whereas the dual-network model shows greater deviation due to its fixed spatial resolution. Among the evaluated effective parameter formulations for the REV-scale model, only the homogenization-based approach captures the LTNE behavior, as it incorporates the interfacial heat transfer coefficient. Convection is relevant for most practical applications, and its impact will be addressed in a follow-up article.
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
Impact of saturation on evaporation-driven density instabilities in porous media: mathematical and numerical analysis
Authors:
C. Bringedal,
S. Kiemle,
C. J. van Duijn,
R. Helmig
Abstract:
Evaporation from a porous medium partially saturated with saline water, causes the salinity (salt concentration) to increase near the top of the porous medium as water leaves while salt stays behind. As the density of the water increases with increased salt concentration, the evaporation leads to a gravitational unstable setting, where density instabilities can form. Whether density instabilities…
▽ More
Evaporation from a porous medium partially saturated with saline water, causes the salinity (salt concentration) to increase near the top of the porous medium as water leaves while salt stays behind. As the density of the water increases with increased salt concentration, the evaporation leads to a gravitational unstable setting, where density instabilities can form. Whether density instabilities form, depends on a large range of parameters like the evaporation rate and intrinsic permeability of the porous medium, but also on the water saturation. As water saturation decreases, the storage, convection and diffusion of salt also decrease, which all influence the onset of instabilities. By performing a linear stability analysis on the governing equations, we give criteria for onset of instabilities. Numerical simulations give information about the further development of these instabilities. With this knowledge we can predict whether and when density instabilities occur, and how they will influence the further development of salt concentration in the porous medium.
△ Less
Submitted 22 January, 2025;
originally announced January 2025.
-
Sharp-Interface Limit of the Cahn-Hilliard-Biot Equations
Authors:
Erlend Storvik,
Carina Bringedal
Abstract:
In this letter, we derive the sharp-interface limit of the Cahn-Hilliard-Biot equations using formal matched asymptotic expansions. We find that in each sub-domain, the quasi-static Biot equations are obtained with domain-specific material parameters. Moreover, across the interface, material displacement and pore pressure are continuous, while volumetric fluid content and normal stress are balance…
▽ More
In this letter, we derive the sharp-interface limit of the Cahn-Hilliard-Biot equations using formal matched asymptotic expansions. We find that in each sub-domain, the quasi-static Biot equations are obtained with domain-specific material parameters. Moreover, across the interface, material displacement and pore pressure are continuous, while volumetric fluid content and normal stress are balanced. By utilizing the energy of the system, the phase-field potential is shown to be influenced by the curvature, along with contributions from both flow and elasticity at the interface. The normal velocity of the interface is proportional to the jump in normal derivative of the phase-field potential across the interface. Finally, we present a numerical experiment that demonstrates how the location of each phase evolves consistently as the diffuse-interface width parameter becomes smaller; only the width of the diffuse interface changes.
△ Less
Submitted 5 December, 2024;
originally announced December 2024.
-
Phase-field modeling and effective simulation of non-isothermal reactive transport
Authors:
Carina Bringedal,
Alexander Jaust
Abstract:
We consider single-phase flow with solute transport where ions in the fluid can precipitate and form a mineral, and where the mineral can dissolve and release solute into the fluid. Such a setting includes an evolving interface between fluid and mineral. We approximate the evolving interface with a diffuse interface, which is modeled with an Allen-Cahn equation. We also include effects from temper…
▽ More
We consider single-phase flow with solute transport where ions in the fluid can precipitate and form a mineral, and where the mineral can dissolve and release solute into the fluid. Such a setting includes an evolving interface between fluid and mineral. We approximate the evolving interface with a diffuse interface, which is modeled with an Allen-Cahn equation. We also include effects from temperature such that the reaction rate can depend on temperature, and allow heat conduction through fluid and mineral. As Allen-Cahn is generally not conservative due to curvature-driven motion, we include a reformulation that is conservative. This reformulation includes a non-local term which makes the use of standard Newton iterations for solving the resulting non-linear system of equations very slow. We instead apply L-scheme iterations, which can be proven to converge for any starting guess, although giving only linear convergence. The three coupled equations for diffuse interface, solute transport and heat transport are solved via an iterative coupling scheme. This allows the three equations to be solved more efficiently compared to a monolithic scheme, and only few iterations are needed for high accuracy. Through numerical experiments we highlight the usefulness and efficiency of the suggested numerical scheme and the applicability of the resulting model.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
Upscaling and Effective Behavior for Two-Phase Porous-Medium Flow using a Diffuse Interface Model
Authors:
Mathis Kelm,
Carina Bringedal,
Bernd Flemisch
Abstract:
We investigate two-phase flow in porous media and derive a two-scale model, which incorporates pore-scale phase distribution and surface tension into the effective behavior at the larger Darcy scale. The free-boundary problem at the pore scale is modeled using a diffuse interface approach in the form of a coupled Allen-Cahn Navier-Stokes system with an additional momentum flux due to surface tensi…
▽ More
We investigate two-phase flow in porous media and derive a two-scale model, which incorporates pore-scale phase distribution and surface tension into the effective behavior at the larger Darcy scale. The free-boundary problem at the pore scale is modeled using a diffuse interface approach in the form of a coupled Allen-Cahn Navier-Stokes system with an additional momentum flux due to surface tension forces. Using periodic homogenization and formal asymptotic expansions, a two-scale model with cell problems for phase evolution and velocity contributions is derived. We investigate the computed effective parameters and their relation to the saturation for different fluid distributions, in comparison to commonly used relative permeability saturation curves. The two-scale model yields non-monotone relations for relative permeability and saturation. The strong dependence on local fluid distribution and effects captured by the cell problems highlights the importance of incorporating pore-scale information into the macro-scale equations.
△ Less
Submitted 30 June, 2023;
originally announced June 2023.
-
Solution approaches for evaporation-driven density instabilities in a slab of saturated porous media
Authors:
Leon H. Kloker,
Carina Bringedal
Abstract:
This work considers the gravitational instability of a saline boundary layer formed by an evaporation-induced flow through a fully-saturated porous slab. Evaporation of saline waters can eventually result in the formation of salt lakes as salt accumulates. As natural convection can impede the accumulation of salt, establishing a relation between its occurrence and the value of physical parameters…
▽ More
This work considers the gravitational instability of a saline boundary layer formed by an evaporation-induced flow through a fully-saturated porous slab. Evaporation of saline waters can eventually result in the formation of salt lakes as salt accumulates. As natural convection can impede the accumulation of salt, establishing a relation between its occurrence and the value of physical parameters such as evaporation rate, height of the slab or porosity is crucial. One step towards determining when gravitational instabilities can arise is to compute the ground-state salinity, that evolves due to the uniform upwards flow caused by evaporation. The resulting salt concentration profile exhibits a sharply increasing salt concentration near the surface, which can lead to a gravitationally unstable setting. In this work, this ground state is analytically derived within the framework of Sturm-Liouville theory. Then, the method of linear stability in conjunction with the quasi-steady state approach is employed to investigate the occurrence of instabilities. These instabilities can develop and grow over time depending on the Rayleigh number and the dimensionless height of the porous medium. To calculate the critical Rayleigh number, which can determine the stability of a particular system, the eigenvalues of the linear perturbation equations have to be computed. Here, a novel fundamental matrix method is proposed to solve this eigenvalue problem and shown to coincide with an established Chebyshev-Galerkin method in their shared range of applicability. Finally, a 2-dimensional direct numerical simulation of the full equation system via the finite volume method is employed to validate the time of onset of convective instabilities predicted by the linear theory. Moreover, the fully nonlinear convection patterns are analyzed.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Two-phase flow dynamics at the interface between GDL and gas distributor channel using a pore-network model
Authors:
Cynthia Michalkowski,
Maziar Veyskarami,
Carina Bringedal,
Rainer Helmig,
Veronika Schleper
Abstract:
For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a fa…
▽ More
For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a favorable technique to investigate the ongoing processes.
Investigating the interface between the cathode layers, a particular challenge is the combination and interaction of the multi-phase flow in the porous material of the gas diffusion layer (GDL) with the free flow in the gas distributor channels. The formation, growth and detachment of water droplets on the hydrophobic, porous surface of the GDL have a major influence on the mass, momentum and energy exchange between the layers.
A dynamic pore-network model is used to describe the flow through the porous GDL on the pore-scale. To capture the droplet occurrence and its influence on the flow, this dynamic two-phase pore-network model is extended to capture droplet formation and growth at the surface of the GDL as well as droplet detachment due to the gas flow in the gas distributor channels. In this article, the developed model is applied to single- and multi-tube systems to investigate the general drop behavior. These rather simple test-cases are compared to experimental and numerical data available in the literature. Finally, the model is applied to a GDL unit cell to analyse the interaction between two-phase flow through the GDL and drop formation at the interface between GDL and gas distributor channel.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
A phase-field approach to model evaporation from porous media: Modeling and upscaling
Authors:
Tufan Ghosh,
Carina Bringedal,
Christian Rohde,
Rainer Helmig
Abstract:
We develop a phase-field model for evaporation from a porous medium by explicitly considering a vapor component together with the liquid and gas phases in the system. The phase-field model consists of the conservation of mass (for phases and vapor component), momentum, and energy. In addition, the evolution of the phase field is described by the Allen-Cahn equation. In the limit of vanishing inter…
▽ More
We develop a phase-field model for evaporation from a porous medium by explicitly considering a vapor component together with the liquid and gas phases in the system. The phase-field model consists of the conservation of mass (for phases and vapor component), momentum, and energy. In addition, the evolution of the phase field is described by the Allen-Cahn equation. In the limit of vanishing interface width, matched asymptotic expansions reveal that the phase-field model reduces to the sharp-interface model with all the relevant transmission conditions on the moving interface. An energy estimate is derived, which suggests that for the diffusion-dominated regime, energy always decreases with time. However, this is not trivial in the case of other regimes. Through numerical examples, we analyze the efficiency of the developed phase-field formulation in modeling the evaporation process. We observe that our formulation is able to capture shrinking liquid droplet, in other words evaporation. Further, the phase-field model is upscaled to the Darcy scale using periodic homogenization for the diffusion-dominated regime. The effective parameters at the Darcy scale are connected to the pore scale through corresponding cell problems.
△ Less
Submitted 25 July, 2024; v1 submitted 24 December, 2021;
originally announced December 2021.
-
Evaporation-driven density instabilities in saturated porous media
Authors:
Carina Bringedal,
Theresa Schollenberger,
G. J. M. Pieters,
C. J. van Duijn,
Rainer Helmig
Abstract:
Soil salinization is a major cause of soil degradation and hampers plant growth. For soils saturated with saline water, the evaporation of water induces accumulation of salt near the top of the soil. The remaining liquid gets an increasingly larger density due to the accumulation of salt, giving a gravitationally unstable situation, where instabilities in the form of fingers can form. These finger…
▽ More
Soil salinization is a major cause of soil degradation and hampers plant growth. For soils saturated with saline water, the evaporation of water induces accumulation of salt near the top of the soil. The remaining liquid gets an increasingly larger density due to the accumulation of salt, giving a gravitationally unstable situation, where instabilities in the form of fingers can form. These fingers can hence lead to a net downwards transport of salt. We here investigate the appearance of these fingers through a linear stability analysis and through numerical simulations. The linear stability analysis gives criteria for onset of instabilities for a large range of parameters. Simulations using a set of parameters give information also about the development of the fingers after onset. With this knowledge we can predict whether and when the instabilities occur, and their effect on the salt concentration development near the top boundary.
△ Less
Submitted 28 August, 2021;
originally announced August 2021.
-
An adaptive multi-scale iterative scheme for a phase-field model for precipitation and dissolution in porous media
Authors:
Manuela Bastidas,
Carina Bringedal,
Iuliu Sorin Pop
Abstract:
Mineral precipitation and dissolution processes in a porous medium can alter the structure of the medium at the scale of pores. Such changes make numerical simulations a challenging task as the geometry of the pores changes in time in an apriori unknown manner. To deal with such aspects, we here adopt a two-scale phase-field model, and propose a robust scheme for the numerical approximation of the…
▽ More
Mineral precipitation and dissolution processes in a porous medium can alter the structure of the medium at the scale of pores. Such changes make numerical simulations a challenging task as the geometry of the pores changes in time in an apriori unknown manner. To deal with such aspects, we here adopt a two-scale phase-field model, and propose a robust scheme for the numerical approximation of the solution. The scheme takes into account both the scale separation in the model, as well as the non-linear character of the model. After proving the convergence of the scheme, an adaptive two-scale strategy is incorporated, which improves the efficiency of the simulations. Numerical tests are presented, showing the efficiency and accuracy of the scheme in the presence of anisotropies and heterogeneities.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Multi-scale three-domain approach for coupling free flow and flow in porous media including droplet-related interface processes
Authors:
Sina Ackermann,
Carina Bringedal,
Rainer Helmig
Abstract:
Drops on a free-flow/porous-medium-flow interface have a strong influence on the exchange of mass, momentum and energy between the two macroscopic flow regimes. Modeling droplet-related pore-scale processes in a macro-scale context is challenging due to the scale gap, but might be rewarding due to relatively low computational costs. We develop a three-domain approach to model drop formation, growt…
▽ More
Drops on a free-flow/porous-medium-flow interface have a strong influence on the exchange of mass, momentum and energy between the two macroscopic flow regimes. Modeling droplet-related pore-scale processes in a macro-scale context is challenging due to the scale gap, but might be rewarding due to relatively low computational costs. We develop a three-domain approach to model drop formation, growth, detachment and film flow in a lower-dimensional interface domain. A simple upscaling technique allows to compute the drop-covered interface area fraction which affects the coupling fluxes. In a first scenario, only drop formation, growth and detachment are taken into account. Then, spreading and merging due to lateral fluxes are considered as well. The simulation results show that the impact of these droplet-related processes can be captured. However, extensions are necessary to represent the influence on the free flow more precisely.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Adaptive numerical homogenization of non-linear diffusion problems
Authors:
Manuela Bastidas,
Carina Bringedal,
Sorin Pop,
Florin Radu
Abstract:
We propose an efficient numerical strategy for simulating fluid flow through porous media with highly oscillatory characteristics. Specifically, we consider non-linear diffusion models. This scheme is based on the classical homogenization theory and uses a locally mass-conservative formulation. In addition, we discuss some properties of the standard non-linear solvers and use an error estimator to…
▽ More
We propose an efficient numerical strategy for simulating fluid flow through porous media with highly oscillatory characteristics. Specifically, we consider non-linear diffusion models. This scheme is based on the classical homogenization theory and uses a locally mass-conservative formulation. In addition, we discuss some properties of the standard non-linear solvers and use an error estimator to perform a local mesh refinement. The main idea is to compute the effective parameters in such a way that the computational complexity is reduced without affecting the accuracy. We perform some numerical examples to illustrate the behaviour of the adaptive scheme and of the non-linear solvers. Finally, we discuss the advantages of the implementation of the numerical homogenization in a periodic media and the applicability of the same scheme in non-periodic test cases such as SPE10th project.
△ Less
Submitted 31 January, 2020; v1 submitted 24 April, 2019;
originally announced April 2019.
