Showing 1–12 of 12 results for author: Briggs, R M

An SNSPD-based detector system for NASA's Deep Space Optical Communications project

Authors: Emma E. Wollman, Jason P. Allmaras, Andrew D. Beyer, Boris Korzh, Marcus C. Runyan, Lautaro Narváez, William H. Farr, Francesco Marsili, Ryan M. Briggs, Gregory J. Miles, Matthew D. Shaw

Abstract: We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diame… ▽ More We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diameter active area and embedded in an optical stack. The detector system also includes cryogenic optics for filtering and focusing the downlink signal and electronics for biasing the array and amplifying the output pulses. The detector system exhibits a peak system detection efficiency of 76% at 1550 nm, a background-limited false count rate as low as 3.7 kcps across the array, timing jitter less than 120 ps FWHM, and a maximum count rate of ~ 1 Gcps. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Comments: 14 pages, 8 figures

Scanning cavity OF-CEAS technique for rapid collection of high resolution spectra

Authors: Christopher A. Curwen, Mathieu Fradet, Ryan M. Briggs

Abstract: We present a modified approach to laser optical-feedback cavity-enhanced absorption spectroscopy. The technique involves continuously scanning the length of a high-finesse cavity to periodically lock a diode laser to the cavity resonance, resulting in a discrete set of transmission measurements that are evenly spaced in frequency. For a fixed laser bias, data can be collected spanning a spectral b… ▽ More We present a modified approach to laser optical-feedback cavity-enhanced absorption spectroscopy. The technique involves continuously scanning the length of a high-finesse cavity to periodically lock a diode laser to the cavity resonance, resulting in a discrete set of transmission measurements that are evenly spaced in frequency. For a fixed laser bias, data can be collected spanning a spectral bandwidth equivalent to the free-spectral range of the cavity, with spectral resolution inversely proportional to the distance from the laser to cavity. The center frequency of this scan can be tuned by tuning the free-running laser frequency. We demonstrate the concept using a fiber-coupled 1578-nm laser and a scanning Fabry-Perot cavity to measure a series of weak CO2 absorption lines with a frequency resolution of 15.6 MHz and a noise equivalent absorption coefficient of 10-7 cm-1, limited by the moderate finesse (~5000) and short length (~5 cm) of the cavity. Individual CO2 line shapes can be measured with high resolution in a single scan that takes 67 ms. The approach has a combination of characteristics that are advantageous for in situ instruments, such as small size, high spectral resolution, fast data collection, and minimal components. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Visible to Ultraviolet Frequency Comb Generation in Lithium Niobate Nanophotonic Waveguides

Authors: Tsung-Han Wu, Luis Ledezma, Connor Fredrick, Pooja Sekhar, Ryoto Sekine, Qiushi Guo, Ryan M. Briggs, Alireza Marandi, Scott A. Diddams

Abstract: The introduction of nonlinear nanophotonic devices to the field of optical frequency comb metrology has enabled new opportunities for low-power and chip-integrated clocks, high-precision frequency synthesis, and broad bandwidth spectroscopy. However, most of these advances remain constrained to the near-infrared region of the spectrum, which has restricted the integration of frequency combs with n… ▽ More The introduction of nonlinear nanophotonic devices to the field of optical frequency comb metrology has enabled new opportunities for low-power and chip-integrated clocks, high-precision frequency synthesis, and broad bandwidth spectroscopy. However, most of these advances remain constrained to the near-infrared region of the spectrum, which has restricted the integration of frequency combs with numerous quantum and atomic systems in the ultraviolet and visible. Here, we overcome this shortcoming with the introduction of multi-segment nanophotonic thin-film lithium niobate (LN) waveguides that combine engineered dispersion and chirped quasi-phase matching for efficient supercontinuum generation via the combination of $χ^{(2)}$ and $χ^{(3)}$ nonlinearities. With only 90 pJ of pulse energy at 1550 nm, we achieve gap-free frequency comb coverage spanning 330 to 2400 nm. The conversion efficiency from the near-infrared pump to the UV-Visible region of 350-550 nm is nearly 20%. Harmonic generation via the $χ^{(2)}$ nonlinearity in the same waveguide directly yields the carrier-envelope offset frequency and a means to verify the comb coherence at wavelengths as short as 350 nm. Our results provide an integrated photonics approach to create visible and UV frequency combs that will impact precision spectroscopy, quantum information processing, and optical clock applications in this important spectral window. △ Less

Submitted 13 May, 2023; originally announced May 2023.

Visible-to-mid-IR tunable frequency comb in nanophotonics

Authors: Arkadev Roy, Luis Ledezma, Luis Costa, Robert Gray, Ryoto Sekine, Qiushi Guo, Mingchen Liu, Ryan M. Briggs, Alireza Marandi

Abstract: Optical frequency comb is an enabling technology for a multitude of applications from metrology to ranging and communications. The tremendous progress in sources of optical frequency combs has mostly been centered around the near-infrared spectral region while many applications demand sources in the visible and mid-infrared, which have so far been challenging to achieve, especially in nanophotonic… ▽ More Optical frequency comb is an enabling technology for a multitude of applications from metrology to ranging and communications. The tremendous progress in sources of optical frequency combs has mostly been centered around the near-infrared spectral region while many applications demand sources in the visible and mid-infrared, which have so far been challenging to achieve, especially in nanophotonics. Here, we report frequency combs tunable from visible to mid-infrared on a single chip based on ultra-widely tunable optical parametric oscillators in lithium niobate nanophotonics. Using picosecond-long pump pulses around 1 $μ$m and tuning of the quasi-phase matching, we show sub-picosecond frequency combs tunable beyond an octave extending from 1.5 $μ$m up to 3.3 $μ$m with femtojoule-level thresholds. We utilize the up-conversion of the infrared combs to generate visible frequency combs reaching 620 nm on the same chip. The ultra-broadband tunability and visible-to-mid-infrared spectral coverage of our nanophotonic source can be combined with an on-chip picosecond source as its pump, as well as pulse shortening and spectral broadening mechanisms at its output, all of which are readily available in lithium niobate nanophotonics. Our results highlight a practical and universal path for the realization of efficient frequency comb sources in nanophotonics overcoming their spectral sparsity. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Octave-spanning tunable parametric oscillation in nanophotonics

Authors: Luis Ledezma, Arkadev Roy, Luis Costa, Ryoto Sekine, Robert Gray, Qiushi Guo, Rajveer Nehra, Ryan M. Briggs, Alireza Marandi

Abstract: Widely-tunable coherent sources are desirable in nanophotonics for a multitude of applications ranging from communications to sensing. The mid-infrared spectral region (wavelengths beyond 2 $μ$m) is particularly important for applications relying on molecular spectroscopy. Among tunable sources, optical parametric oscillators typically offer some of the broadest tuning ranges; however, their imple… ▽ More Widely-tunable coherent sources are desirable in nanophotonics for a multitude of applications ranging from communications to sensing. The mid-infrared spectral region (wavelengths beyond 2 $μ$m) is particularly important for applications relying on molecular spectroscopy. Among tunable sources, optical parametric oscillators typically offer some of the broadest tuning ranges; however, their implementations in nanophotonics have been limited to narrow tuning ranges and only at visible and near-infrared wavelengths. Here, we surpass these limits in dispersion-engineered periodically-poled lithium niobate nanophotonics and demonstrate ultra-widely tunable optical parametric oscillators. With a pump wavelength near 1 $μ$m, we generate output wavelengths tunable from 1.53 $μ$m to 3.25 $μ$m in a single chip with output powers as high as tens of milliwatts. Our results represent the first octave-spanning tunable source in nanophotonics extending into the mid-infrared which can be useful for numerous integrated photonic applications. △ Less

Submitted 11 November, 2022; v1 submitted 22 March, 2022; originally announced March 2022.

Journal ref: Sci. Adv. vol 9, no 30, eadf9711 (2023)

Impedance-matched differential superconducting nanowire detectors

Authors: Marco Colangelo, Boris Korzh, Jason P. Allmaras, Andrew D. Beyer, Andrew S. Mueller, Ryan M. Briggs, Bruce Bumble, Marcus Runyan, Martin J. Stevens, Adam N. McCaughan, Di Zhu, Stephen Smith, Wolfgang Becker, Lautaro Narváez, Joshua C. Bienfang, Simone Frasca, Angel E. Velasco, Cristián H. Peña, Edward E. Ramirez, Alexander B. Walter, Ekkehart Schmidt, Emma E. Wollman, Maria Spiropulu, Richard Mirin, Sae Woo Nam , et al. (2 additional authors not shown)

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Single-photon detection in the mid-infrared up to 10 micron wavelength using tungsten silicide superconducting nanowire detectors

Authors: V. B. Verma, B. Korzh, A. B. Walter, A. E. Lita, R. M. Briggs, M. Colangelo, Y. Zhai, E. E. Wollman, A. D. Beyer, J. P. Allmaras, B. Bumble, H. Vora, D. Zhu, E. Schmidt, K. K. Berggren, R. P. Mirin, S. W. Nam, M. D. Shaw

Abstract: We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectros… ▽ More We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectroscopy. △ Less

Submitted 17 December, 2020; originally announced December 2020.

Demonstration of a Thermally-Coupled Row-Column SNSPD Imaging Array

Authors: Jason P. Allmaras, Emma E. Wollman, Andrew D. Beyer, Ryan M. Briggs, Boris A. Korzh, Bruce Bumble, Matthew D. Shaw

Abstract: While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture… ▽ More While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture with the channels of one layer oriented in rows and the second layer in columns, we demonstrate imaging capability in 16-pixel arrays with accurate spot tracking at the few photon level. We also explore the performance tradeoffs of orienting the top layer nanowires parallel and perpendicular to the bottom layer. The thermally-coupled row-column scheme is readily able to scale to the kilopixel size with existing readout systems, and when combined with other multiplexing architectures, has the potential to enable megapixel scale SNSPD imaging arrays. △ Less

Submitted 24 February, 2020; originally announced February 2020.

UV superconducting nanowire single-photon detectors with high efficiency, low noise, and 4 K operating temperature

Authors: Emma E. Wollman, Varun B. Verma, Andrew D. Beyer, Ryan M. Briggs, Francesco Marsili, Jason P. Allmaras, Adriana E. Lita, Richard P. Mirin, Sae Woo Nam, Matthew D. Shaw

Abstract: For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for… ▽ More For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 $μ$m in diameter, 70 - 80% efficiency, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ~ 0.25 counts/hr for a 56 $μ$m diameter pixel. By using the amorphous superconductor MoSi, these UV SNSPDs are also able to operate at temperatures up to 4.2 K. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy. △ Less

Submitted 11 August, 2017; originally announced August 2017.

Comments: 9 pages, 6 figures

Efficient Dielectric Metasurface Collimating Lenses for Mid-Infrared Quantum Cascade Lasers

Authors: Amir Arbabi, Ryan M. Briggs, Yu Horie, Mahmood Bagheri, Andrei Faraon

Abstract: Light emitted from single-mode semiconductor lasers generally has large divergence angles, and high numerical aperture lenses are required for beam collimation. Visible and near infrared lasers are collimated using aspheric glass or plastic lenses, yet collimation of mid-infrared quantum cascade lasers typically requires more costly aspheric lenses made of germanium, chalcogenide compounds, or oth… ▽ More Light emitted from single-mode semiconductor lasers generally has large divergence angles, and high numerical aperture lenses are required for beam collimation. Visible and near infrared lasers are collimated using aspheric glass or plastic lenses, yet collimation of mid-infrared quantum cascade lasers typically requires more costly aspheric lenses made of germanium, chalcogenide compounds, or other infrared-transparent materials. Here we report mid-infrared dielectric metasurface flat lenses that efficiently collimate the output beam of single-mode quantum cascade lasers. The metasurface lenses are composed of amorphous silicon posts on a flat sapphire substrate and can be fabricated at low cost using a single step conventional UV binary lithography. Mid-infrared radiation from a 4.8 $μ$m distributed-feedback quantum cascade laser is collimated using a polarization insensitive metasurface lens with 0.86 numerical aperture and 79% transmission efficiency. The collimated beam has a half divergence angle of 0.36$^\circ$ and beam quality factor of $M^2$=1.02. △ Less

Submitted 25 November, 2015; originally announced November 2015.

Evolutionary approach for finding the atomic structure of steps on stable crystal surfaces

Authors: R. M. Briggs, C. V. Ciobanu

Abstract: The problem addressed here can be concisely formulated as follows: given a stable surface orientation with a known reconstruction and given a direction in the plane of this surface, find the atomic structure of the steps oriented along that direction. We report a robust and generally applicable variable-number genetic algorithm for step structure determination and exemplify it by determining the… ▽ More The problem addressed here can be concisely formulated as follows: given a stable surface orientation with a known reconstruction and given a direction in the plane of this surface, find the atomic structure of the steps oriented along that direction. We report a robust and generally applicable variable-number genetic algorithm for step structure determination and exemplify it by determining the structure of monatomic steps on Si(114)-$2\times 1$. We show how the location of the step edge with respect to the terrace reconstructions, the step width (number of atoms), and the positions of the atoms in the step region can all be simultaneously determined. △ Less

Submitted 26 February, 2007; originally announced February 2007.

Comments: some low resolution figures due to arxiv limits

Journal ref: Physical Review B 75, 195415 (2007) (7 pages)

The stability of strained H:Si(105) and H:Ge(105) surfaces

Authors: Cristian V. Ciobanu, Ryan M. Briggs

Abstract: We report atomic scale studies of the effect of applied strain and hydrogen environment on the reconstructions of the (105) Si and Ge surfaces. Surface energy calculations for monohydride-terminated (001) and (105) reconstructions reveal that the recently established single-height rebonded model is unstable not only with respect to (001), but also in comparison to other monohydride (105) structu… ▽ More We report atomic scale studies of the effect of applied strain and hydrogen environment on the reconstructions of the (105) Si and Ge surfaces. Surface energy calculations for monohydride-terminated (001) and (105) reconstructions reveal that the recently established single-height rebonded model is unstable not only with respect to (001), but also in comparison to other monohydride (105) structures. This finding persists for both Si and Ge, for applied biaxial strains from -4% to 4%, and for nearly the entire relevant domain of the chemical potential of hydrogen, thus providing an explanation for the recently observed H-induced destabilization of the Ge(105) surface. △ Less

Submitted 14 December, 2005; originally announced December 2005.

Journal ref: Applied Physics Letters 88, 133125 (2006)