Showing 1–50 of 146 results for author: Brandt, L

Transport of spherical microparticles in a 3D vortex flow

Authors: Marine Aulnette, Noa Burshtein, Arash Alizad Banaei, Luca Brandt, Simon J. Haward, Amy Q. Shen, Blaise Delmotte, Anke Lindner

Abstract: Particles are common in biological and environmental flows and are widely used in industrial and pharmaceutical applications. Their motion and flow dynamics are strongly affected by interactions with the surrounding flow structure. While particle-flow interactions have been extensively studied in low Reynolds number (Re) flows as well as in fully developed turbulence, the transport mechanisms of t… ▽ More Particles are common in biological and environmental flows and are widely used in industrial and pharmaceutical applications. Their motion and flow dynamics are strongly affected by interactions with the surrounding flow structure. While particle-flow interactions have been extensively studied in low Reynolds number (Re) flows as well as in fully developed turbulence, the transport mechanisms of these particles in intermediate flow regimes remain less explored. Here, we investigate the response of neutrally buoyant spherical particles to a single vortex flow field. Using a microfluidic cross-slot geometry, we generate a well-characterized, stationary, three-dimensional streamwise vortex at moderate $\text{Re}$ ($\sim 50$). Our experimental results, supported by numerical simulations, show that with increasing particle diameter, they are progressively excluded from the vortex core. Initially, small particles follow a Burgers vortex-like self-similar motion, but for larger particle diameters, deviations from this trend emerge due to fluid inertia and finite-size effects. These findings enhance our understanding of particle dynamics in vortical flows and have implications for microfluidic applications involving particle sorting and separation. △ Less

Submitted 3 June, 2025; originally announced June 2025.

Comments: 20 pages, 8 figures

Anomalies by Synthesis: Anomaly Detection using Generative Diffusion Models for Off-Road Navigation

Authors: Siddharth Ancha, Sunshine Jiang, Travis Manderson, Laura Brandt, Yilun Du, Philip R. Osteen, Nicholas Roy

Abstract: In order to navigate safely and reliably in off-road and unstructured environments, robots must detect anomalies that are out-of-distribution (OOD) with respect to the training data. We present an analysis-by-synthesis approach for pixel-wise anomaly detection without making any assumptions about the nature of OOD data. Given an input image, we use a generative diffusion model to synthesize an edi… ▽ More In order to navigate safely and reliably in off-road and unstructured environments, robots must detect anomalies that are out-of-distribution (OOD) with respect to the training data. We present an analysis-by-synthesis approach for pixel-wise anomaly detection without making any assumptions about the nature of OOD data. Given an input image, we use a generative diffusion model to synthesize an edited image that removes anomalies while keeping the remaining image unchanged. Then, we formulate anomaly detection as analyzing which image segments were modified by the diffusion model. We propose a novel inference approach for guided diffusion by analyzing the ideal guidance gradient and deriving a principled approximation that bootstraps the diffusion model to predict guidance gradients. Our editing technique is purely test-time that can be integrated into existing workflows without the need for retraining or fine-tuning. Finally, we use a combination of vision-language foundation models to compare pixels in a learned feature space and detect semantically meaningful edits, enabling accurate anomaly detection for off-road navigation. Project website: https://siddancha.github.io/anomalies-by-diffusion-synthesis/ △ Less

Submitted 28 May, 2025; originally announced May 2025.

Comments: Presented at ICRA 2025

Training RL Agents for Multi-Objective Network Defense Tasks

Authors: Andres Molina-Markham, Luis Robaina, Sean Steinle, Akash Trivedi, Derek Tsui, Nicholas Potteiger, Lauren Brandt, Ransom Winder, Ahmed Ridley

Abstract: Open-ended learning (OEL) -- which emphasizes training agents that achieve broad capability over narrow competency -- is emerging as a paradigm to develop artificial intelligence (AI) agents to achieve robustness and generalization. However, despite promising results that demonstrate the benefits of OEL, applying OEL to develop autonomous agents for real-world cybersecurity applications remains a… ▽ More Open-ended learning (OEL) -- which emphasizes training agents that achieve broad capability over narrow competency -- is emerging as a paradigm to develop artificial intelligence (AI) agents to achieve robustness and generalization. However, despite promising results that demonstrate the benefits of OEL, applying OEL to develop autonomous agents for real-world cybersecurity applications remains a challenge. We propose a training approach, inspired by OEL, to develop autonomous network defenders. Our results demonstrate that like in other domains, OEL principles can translate into more robust and generalizable agents for cyber defense. To apply OEL to network defense, it is necessary to address several technical challenges. Most importantly, it is critical to provide a task representation approach over a broad universe of tasks that maintains a consistent interface over goals, rewards and action spaces. This way, the learning agent can train with varying network conditions, attacker behaviors, and defender goals while being able to build on previously gained knowledge. With our tools and results, we aim to fundamentally impact research that applies AI to solve cybersecurity problems. Specifically, as researchers develop gyms and benchmarks for cyber defense, it is paramount that they consider diverse tasks with consistent representations, such as those we propose in our work. △ Less

Submitted 28 May, 2025; originally announced May 2025.

accLB: A High-Performance Lattice Boltzmann Code for Multiphase Turbulence on Multi-Gpu Architectures

Authors: Marco Lauricella, Aritra Mukherjee, Luca Brandt, Sauro Succi, Daulet Izbassarov, Andrea Montessori

Abstract: In this work, we present accLB, a high-performance Fortran-based lattice Boltzmann (LB) solver tailored to multiphase turbulent flows on multi-GPU architectures. The code couples a conservative phase-field formulation of the Allen-Cahn equation with a thread-safe, regularized LB method to capture complex interface dynamics. Designed from the ground up for HPC environments, accLB employs MPI for di… ▽ More In this work, we present accLB, a high-performance Fortran-based lattice Boltzmann (LB) solver tailored to multiphase turbulent flows on multi-GPU architectures. The code couples a conservative phase-field formulation of the Allen-Cahn equation with a thread-safe, regularized LB method to capture complex interface dynamics. Designed from the ground up for HPC environments, accLB employs MPI for distributed memory parallelism and OpenACC for GPU acceleration, achieving excellent portability and scalability on leading pre-exascale systems such as Leonardo and LUMI. Benchmark tests demonstrate strong and weak scaling efficiencies on multiple GPUs. Physical validation includes direct numerical simulations of homogeneous isotropic turbulence (HIT). Further, we examine bubble-laden HIT and observe a transition to a $-3$ energy scaling, as in experiments and theoretical predictions, due to bubble-induced dissipation, along with enhanced small-scale intermittency. These results highlight accLB as a robust and scalable platform for the simulation of multiphase turbulence in extreme computational regimes. △ Less

Submitted 2 May, 2025; originally announced May 2025.

Evaporation of Finite-Size Ammonia and n-Heptane Droplets in Weakly Compressible Turbulence: An Interface-Resolved DNS Study

Authors: Salar Zamani Salimi, Andrea Gruber, Nicolò Scapin, Luca Brandt

Abstract: This study presents direct numerical simulation (DNS) of finite-size, interface-resolved ammonia and n-heptane droplets evaporating in decaying homogeneous isotropic turbulence. Simulations are conducted for each fuel to model the dynamics in a dense spray region, where the liquid volume fraction exceeds $\mathcal{O}(10^{-2})$. The focus is on investigating the complex interactions between droplet… ▽ More This study presents direct numerical simulation (DNS) of finite-size, interface-resolved ammonia and n-heptane droplets evaporating in decaying homogeneous isotropic turbulence. Simulations are conducted for each fuel to model the dynamics in a dense spray region, where the liquid volume fraction exceeds $\mathcal{O}(10^{-2})$. The focus is on investigating the complex interactions between droplets, turbulence, and phase change, with emphasis on droplet-droplet interactions and their influence on the evaporation process. The present study also explores how varying turbulence intensities affect the evaporation rates of each fuel, unveiling the differences in the coalescence and energy transfer from the liquid to the gaseous phase. The results reveal that, when comparing ammonia with n-heptane with equal liquid volume fractions, ammonia exhibits faster initial evaporation due to its higher volatility. However, this rate declines over time as frequent droplet coalescence reduces the total surface area available for evaporation. When numerical experiments are initialized with equal energy content, increasing turbulence intensity enhances the evaporation of n-heptane throughout the simulation, while ammonia evaporation soon becomes less sensitive to turbulence due to rapid vapor saturation. These findings are relevant to improving predictive CFD models and optimizing fuel injection in spray-combustion applications, especially under high-pressure conditions. △ Less

Submitted 29 May, 2025; v1 submitted 23 April, 2025; originally announced April 2025.

Interface-Induced Stability of Nontrivial Topological Spin Textures: Unveiling Room-Temperature Hopfions and Skyrmions

Authors: F. Katmis, V. Lauter, R. Yagan, L. S. Brandt, A. M. Cheghabouri, H. Zhou, J. W. Freeland, C. I. L. de Araujo, M. E. Jamer, D. Heiman, M. C. Onbasli, J. S. Moodera

Abstract: Topological spin configurations, such as soliton-like spin texture and Dirac electron assemblies, have emerged in recent years in both fundamental science and technological applications. Achieving stable topological spin textures at room-temperature is crucial for enabling these structures as long-range information carriers. However, their creation and manipulation processes have encountered diffi… ▽ More Topological spin configurations, such as soliton-like spin texture and Dirac electron assemblies, have emerged in recent years in both fundamental science and technological applications. Achieving stable topological spin textures at room-temperature is crucial for enabling these structures as long-range information carriers. However, their creation and manipulation processes have encountered difficulties due to multi-step field training techniques and competitive interactions. Thus, a spontaneous ground state for multi-dimensional topological spin textures is desirable, as skyrmions form swirling, hedgehog-like spin structures in two dimensions, while hopfions emerge as their twisted three-dimensional counterparts. Here, we report the first observation of robust and reproducible topological spin textures of hopfions and skyrmions observed at room temperature and in zero magnetic field, which are stabilized by geometric confinement and protected by interfacial magnetism in a ferromagnet/topological insulator/ferromagnet trilayer heterostructure. These skyrmion-hopfion configurations are directly observed at room temperature with Lorenz transmission electron microscopy. Using micromagnetic modelling, the experimental observations of hopfion-skyrmion assemblies are reproduced. Our model reveals a complete picture of how spontaneously organized skyrmion lattices encircled by hopfion rings are controlled by surface electrons, uniaxial anisotropy and Dzyaloshinskii-Moriya interaction, all at ambient temperature. Our study provides evidence that topological chiral spin textures can facilitate the development of magnetically defined information carriers. These stable structures hold promise for ultralow-power and high-density information processing, paving the way for the next generation of topologically defined devices. △ Less

Submitted 13 April, 2025; originally announced April 2025.

Thread-safe multiphase lattice Boltzmann model for droplet and bubble dynamics at high density and viscosity contrasts

Authors: Marco Lauricella, Adriano Tiribocchi, Sauro Succi, Luca Brandt, Aritra Mukherjee, Michele La Rocca, Andrea Montessori

Abstract: This study presents a high-order, thread-safe version of the lattice Boltzmann (LBM) method, incorporating an interface-capturing equation, based on the conservative Allen-Cahn equation, to simulate incompressible two-component systems with high-density and viscosity contrasts. The method utilizes a recently proposed thread-safe implementation optimized for shared memory architectures and it is em… ▽ More This study presents a high-order, thread-safe version of the lattice Boltzmann (LBM) method, incorporating an interface-capturing equation, based on the conservative Allen-Cahn equation, to simulate incompressible two-component systems with high-density and viscosity contrasts. The method utilizes a recently proposed thread-safe implementation optimized for shared memory architectures and it is employed to reproduce the dynamics of droplets and bubbles on several test cases with results in agreement with experiments and other numerical simulations from the literature. The proposed approach offers promising opportunities for high-performance computing simulations of realistic fluid systems with high-density and viscosity contrasts for advanced applications in environmental, atmospheric and meteorological flows, all the way down to microfluidic and biological systems, particularly on GPU-based architectures. △ Less

Submitted 1 January, 2025; originally announced January 2025.

Dense Suspensions in Rotary Shear

Authors: Naveen Kumar Agrawal, Zhouyang Ge, Martin Trulsson, Outi Tammisola, Luca Brandt

Abstract: We introduce a novel unsteady shear protocol, which we name Rotary Shear (RS), where the flow and vorticity directions are continuously rotated around the velocity gradient direction by imposing two out-of-phase oscillatory shear (OS) in orthogonal directions. We perform numerical simulations of dense suspensions of rigid non-Brownian spherical particles at volume fractions ($φ$) between 0.40 and… ▽ More We introduce a novel unsteady shear protocol, which we name Rotary Shear (RS), where the flow and vorticity directions are continuously rotated around the velocity gradient direction by imposing two out-of-phase oscillatory shear (OS) in orthogonal directions. We perform numerical simulations of dense suspensions of rigid non-Brownian spherical particles at volume fractions ($φ$) between 0.40 and 0.55 subject to this new RS protocol and compare to the classical OS protocol. We find that the suspension viscosity displays a similar non-monotonic response as the strain amplitude ($γ_0$) is increased: a minimum viscosity is found at an intermediate, volume-fraction dependent strain amplitude. However, the suspension dynamics is different in the new protocol. Unlike the OS protocol, suspensions under RS do not show self-adsorbing states at any $γ_0$ and do not undergo the reversible-irreversible transition: the stroboscropic particle dynamics are always diffusive, which we attribute to the fact that the RS protocol is irreversible. To validate this hypothesis, we introduce a reversible-RS (RRS) protocol, a combination of RS and OS, where we rotate the shear direction (as in RS) until it is instantaneously reversed (as in OS), and find the resulting rheology and dynamics to be closer to OS. Detailed microstructure analysis shows that both the OS and RRS protocols result in a contact-free, isotropic to an in-contact, anisotropic microstructure at the dynamically reversible-to-irreversible transition. The RS protocol does not render such a transition, and the dynamics remain diffusive with an in-contact, anisotropic microstructure for all strain amplitudes. △ Less

Submitted 20 November, 2024; originally announced November 2024.

Turbulent pipe flow with spherical particles: drag as a function of particle size and volume fraction

Authors: Martin Leskovec, Sagar Zade, Mehdi Niazi, Pedro Costa, Fredrik Lundell, Luca Brandt

Abstract: Suspensions of finite-size solid particles in a turbulent pipe flow are found in many industrial and technical flows. Due to the ample parameter space consisting of particle size, concentration, density and Reynolds number, a complete picture of the particle-fluid interaction is still lacking. Pressure drop predictions are often made using viscosity models only considering the bulk solid volume fr… ▽ More Suspensions of finite-size solid particles in a turbulent pipe flow are found in many industrial and technical flows. Due to the ample parameter space consisting of particle size, concentration, density and Reynolds number, a complete picture of the particle-fluid interaction is still lacking. Pressure drop predictions are often made using viscosity models only considering the bulk solid volume fraction. For the case of turbulent pipe flow laden with neutrally buoyant spherical particles, we investigate the pressure drop and overall drag (friction factor), fluid velocity and particle distribution in the pipe. We use a combination of experimental (MRV) and numerical (DNS) techniques and a continuum flow model. We find that the particle size and the bulk flow rate influence the mean fluid velocity, velocity fluctuations and the particle distribution in the pipe for low flow rates. However, the effects of the added solid particles diminish as the flow rate increases. We created a master curve for drag change compared to single-phase flow for the particle-laden cases. This curve can be used to achieve more accurate friction factor predictions than the traditional modified viscosity approach that does not account for particle size. △ Less

Submitted 15 November, 2024; originally announced November 2024.

Journal ref: Int. J. Multiph. Flow 179 (2024) 104931

Turbulent convection in emulsions: the Rayleigh-Bénard configuration

Authors: Abbas Moradi Bilondi, Nicolò Scapin, Luca Brandt, Parisa Mirbod

Abstract: This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The… ▽ More This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The Rayleigh, Prandtl, Weber, and Froude numbers are held constant at $10^8$, $4$, $6000$, and $1$, respectively. Initially, when both fluids share the same properties, a 10\% Nusselt number increase is observed at the highest volume fractions. In this case, despite a reduction in turbulent kinetic energy, droplets enhance energy transfer to smaller scales, smaller than those of single-phase flow, promoting local mixing. By varying viscosity ratios, while maintaining a constant Rayleigh number based on the average mixture properties, the global heat transfer rises by approximately 25\% at $\Upphi=0.2$ and $λ_μ=10$. This is attributed to increased small-scale mixing and turbulence in the less viscous carrier phase. In addition, a dispersed phase with higher thermal diffusivity results in a 50\% reduction in the Nusselt number compared to the single-phase counterpart, owing to faster heat conduction and reduced droplet presence near walls. The study also addresses droplet-size distributions, confirming two distinct ranges dominated by coalescence and breakup with different scaling laws. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Comments: Accepted on the Journal of Fluid Mechanics

Report number: 5808749

Predicting State Transitions in Autonomous Nonlinear Bistable Systems with Hidden Stochasticity

Authors: Léopold Van Brandt, Jean-Charles Delvenne

Abstract: Bistable autonomous systems can be found inmany areas of science. When the intrinsic noise intensity is large, these systems exhibits stochastic transitions from onemetastable steady state to another. In electronic bistable memories, these transitions are failures, usually simulated in a Monte-Carlo fashion at a high CPU-time price. Existing closed-form formulas, relying on near-stable-steady-stat… ▽ More Bistable autonomous systems can be found inmany areas of science. When the intrinsic noise intensity is large, these systems exhibits stochastic transitions from onemetastable steady state to another. In electronic bistable memories, these transitions are failures, usually simulated in a Monte-Carlo fashion at a high CPU-time price. Existing closed-form formulas, relying on near-stable-steady-state approximations of the nonlinear system dynamics to estimate the mean transition time, have turned out inaccurate. Our contribution is twofold. From a unidimensional stochastic model of overdamped autonomous systems, we propose an extended Eyring-Kramers analytical formula accounting for both nonlinear drift and state-dependent white noise variance, rigorously derived from Itô stochastic calculus. We also adapt it to practical system engineering situations where the intrinsic noise sources are hidden and can only be inferred from the fluctuations of observables measured in steady states. First numerical trials on an industrial electronic case study suggest that our approximate prediction formula achieve remarkable accuracy, outperforming previous non-Monte-Carlo approaches. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: Accepted for IEEE L-CSS

The MEMENTO code for modelling of macroscopic melt motion in fusion devices

Authors: K. Paschalidis, F. Lucco Castello, S. Ratynskaia, P. Tolias, L. Brandt

Abstract: The MEMENTO (MEtallic Melt Evolution in Next-step TOkamaks) code is a new numerical implementation of the physics model originally developed for the MEMOS-U code with the objective to self-consistently describe the generation of melt and its subsequent large scale dynamics in fusion devices and to assess the damage of metallic reactor armor under powerful normal and off-normal plasma events. The m… ▽ More The MEMENTO (MEtallic Melt Evolution in Next-step TOkamaks) code is a new numerical implementation of the physics model originally developed for the MEMOS-U code with the objective to self-consistently describe the generation of melt and its subsequent large scale dynamics in fusion devices and to assess the damage of metallic reactor armor under powerful normal and off-normal plasma events. The model has been validated in multiple dedicated EUROfusion experiments. MEMENTO solves the heat and phase transfer problem coupled with the incompressible Navier-Stokes equations in the shallow water approximation for the thin liquid film over the solid metal and with the current propagation equations on a domain that features a time-evolving deforming metal-plasma interface. The code utilizes non-uniform and adaptive meshing along with sub-cycling in time facilitated by the AMReX open-source framework as well as AMReX's built-in parallelization capabilities. △ Less

Submitted 15 July, 2024; v1 submitted 19 April, 2024; originally announced April 2024.

Comments: 15 pages, 12 figures

Journal ref: Fusion Engineering and Design 206, 114603 (2024)

Moments of Entropy Production in Dissipative Devices

Authors: Jean-Charles Delvenne, Léopold Van Brandt

Abstract: We characterize the possible moments of entropy production for general overdamped Markovian systems. We find a general formulation of the problem, and derive a new necessary condition between the second and third moment. We determine all possible first, second and third moments of entropy production for a white noise process. As a consequence, we obtain a lower bound for the skewness of the curren… ▽ More We characterize the possible moments of entropy production for general overdamped Markovian systems. We find a general formulation of the problem, and derive a new necessary condition between the second and third moment. We determine all possible first, second and third moments of entropy production for a white noise process. As a consequence, we obtain a lower bound for the skewness of the current fluctuations in dissipative devices such as transistors, thereby demonstrating that the Gaussianity assumption widely used in electronic engineering is thermodynamically inconsistent. △ Less

Submitted 30 March, 2024; originally announced April 2024.

FeatUp: A Model-Agnostic Framework for Features at Any Resolution

Authors: Stephanie Fu, Mark Hamilton, Laura Brandt, Axel Feldman, Zhoutong Zhang, William T. Freeman

Abstract: Deep features are a cornerstone of computer vision research, capturing image semantics and enabling the community to solve downstream tasks even in the zero- or few-shot regime. However, these features often lack the spatial resolution to directly perform dense prediction tasks like segmentation and depth prediction because models aggressively pool information over large areas. In this work, we in… ▽ More Deep features are a cornerstone of computer vision research, capturing image semantics and enabling the community to solve downstream tasks even in the zero- or few-shot regime. However, these features often lack the spatial resolution to directly perform dense prediction tasks like segmentation and depth prediction because models aggressively pool information over large areas. In this work, we introduce FeatUp, a task- and model-agnostic framework to restore lost spatial information in deep features. We introduce two variants of FeatUp: one that guides features with high-resolution signal in a single forward pass, and one that fits an implicit model to a single image to reconstruct features at any resolution. Both approaches use a multi-view consistency loss with deep analogies to NeRFs. Our features retain their original semantics and can be swapped into existing applications to yield resolution and performance gains even without re-training. We show that FeatUp significantly outperforms other feature upsampling and image super-resolution approaches in class activation map generation, transfer learning for segmentation and depth prediction, and end-to-end training for semantic segmentation. △ Less

Submitted 1 April, 2024; v1 submitted 15 March, 2024; originally announced March 2024.

Comments: Accepted to the International Conference on Learning Representations (ICLR) 2024

How small droplets form in turbulent multiphase flows

Authors: Marco Crialesi-Esposito, Guido Boffetta, Luca Brandt, Sergio Chibbaro, Stefano Musacchio

Abstract: The formation of small droplets and bubbles in turbulent flows is a crucial process in geophysics and engineering, whose underlying physical mechanism remains a puzzle. In this letter, we address this problem by means of high-resolution numerical simulations, comparing a realistic multiphase configuration with a numerical experiment in which we attenuate the presence of strong velocity gradients e… ▽ More The formation of small droplets and bubbles in turbulent flows is a crucial process in geophysics and engineering, whose underlying physical mechanism remains a puzzle. In this letter, we address this problem by means of high-resolution numerical simulations, comparing a realistic multiphase configuration with a numerical experiment in which we attenuate the presence of strong velocity gradients either across the whole mixture or in the disperse phase only. Our results show unambiguously that the formation of small droplets is governed by the internal dynamics which occur during the break-up of large drops and that the high vorticity and the extreme dissipation associated to these events are the consequence and not the cause of the breakup. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Stochastic Nonlinear Dynamical Modelling of SRAM Bitcells in Retention Mode

Authors: Léopold Van Brandt, Denis Flandre, Jean-Charles Delvenne

Abstract: SRAM bitcells in retention mode behave as autonomous stochastic nonlinear dynamical systems. From observation of variability-aware transient noise simulations, we provide an unidimensional model, fully characterizable by conventional deterministic SPICE simulations, insightfully explaining the mechanism of intrinsic noise-induced bit flips. The proposed model is exploited to, first, explain the re… ▽ More SRAM bitcells in retention mode behave as autonomous stochastic nonlinear dynamical systems. From observation of variability-aware transient noise simulations, we provide an unidimensional model, fully characterizable by conventional deterministic SPICE simulations, insightfully explaining the mechanism of intrinsic noise-induced bit flips. The proposed model is exploited to, first, explain the reported inaccuracy of existing closed-form near-equilibrium formulas aimed at predicting the mean time to failure and, secondly, to propose a closer estimate attractive in terms of CPU time. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Comments: Accepted proceeding for invited talk at IEEE EDTM 2024, Bangalore, India

Variability-Aware Noise-Induced Dynamic Instability of Ultra-Low-Voltage SRAM Bitcells

Authors: Léopold Van Brandt, Jean-Charles Delvenne, Denis Flandre

Abstract: Stability of ultra-low-voltage SRAM bitcells in retention mode is threatened by two types of uncertainty: process variability and intrinsic noise. While variability dominates the failure probability, noise-induced bit flips in weakened bitcells lead to dynamic instability. We study both effects jointly in a unified SPICE simulation framework. Starting from a synthetic representation of process var… ▽ More Stability of ultra-low-voltage SRAM bitcells in retention mode is threatened by two types of uncertainty: process variability and intrinsic noise. While variability dominates the failure probability, noise-induced bit flips in weakened bitcells lead to dynamic instability. We study both effects jointly in a unified SPICE simulation framework. Starting from a synthetic representation of process variations introduced in a previous work, we identify the cases of poor noise immunity that require thorough noise analyses. Relying on a rigorous and systematic methodology, we simulate them in the time domain so as to emulate a true data retention operation. Short times to failure, unacceptable for a practical ultra-low-power memory system application, are recorded. The transient bit-flip mechanism is analysed and a dynamic failure criterion involving the unstable point is established. We conclude that, beyond static variability, the dynamic noise inflates defectiveness among SRAM bitcells. We also discuss the limits of existing analytical formulas from the literature, which rely on a linear near-equilibrium approximation of the SRAM dynamics to, inaccurately, predict the mean time to failure. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Comments: Accepted proceeding of IEEE LASCAS 2024, Punta del Este, Uruguay

GWP-ASan: Sampling-Based Detection of Memory-Safety Bugs in Production

Authors: Kostya Serebryany, Chris Kennelly, Mitch Phillips, Matt Denton, Marco Elver, Alexander Potapenko, Matt Morehouse, Vlad Tsyrklevich, Christian Holler, Julian Lettner, David Kilzer, Lander Brandt

Abstract: Despite the recent advances in pre-production bug detection, heap-use-after-free and heap-buffer-overflow bugs remain the primary problem for security, reliability, and developer productivity for applications written in C or C++, across all major software ecosystems. Memory-safe languages solve this problem when they are used, but the existing code bases consisting of billions of lines of C and C+… ▽ More Despite the recent advances in pre-production bug detection, heap-use-after-free and heap-buffer-overflow bugs remain the primary problem for security, reliability, and developer productivity for applications written in C or C++, across all major software ecosystems. Memory-safe languages solve this problem when they are used, but the existing code bases consisting of billions of lines of C and C++ continue to grow, and we need additional bug detection mechanisms. This paper describes a family of tools that detect these two classes of memory-safety bugs, while running in production, at near-zero overhead. These tools combine page-granular guarded allocation and low-rate sampling. In other words, we added an "if" statement to a 36-year-old idea and made it work at scale. We describe the basic algorithm, several of its variants and implementations, and the results of multi-year deployments across mobile, desktop, and server applications. △ Less

Submitted 13 January, 2024; v1 submitted 15 November, 2023; originally announced November 2023.

The non-Landauer Bound for the Dissipation of Bit Writing Operation

Authors: Léopold Van Brandt, Jean-Charles Delvenne

Abstract: We propose a novel bound on the mimimum dissipation required in any circumstances to transfer a certain amount of charge through any resistive device. We illustrate it on the task of writing a logical 1 (encoded as a prescribed voltage) into a capacitance, through various linear or nonlinear devices. We show that, even though the celebrated Landauer bound (which only applies to bit erasure) does n… ▽ More We propose a novel bound on the mimimum dissipation required in any circumstances to transfer a certain amount of charge through any resistive device. We illustrate it on the task of writing a logical 1 (encoded as a prescribed voltage) into a capacitance, through various linear or nonlinear devices. We show that, even though the celebrated Landauer bound (which only applies to bit erasure) does not apply here, one can still formulate a "non- Landauer" lower bound on dissipation, that crucially depends on the time budget to perform the operation, as well as the average conductance of the driving device. We compare our bound with empirical results reported in the literature and realistic simulations of CMOS pass and transmission gates in decananometer technology. Our non-Landauer bound turns out to be a quantitative benchmark to assess the (non-)optimality of a writing operation. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Noise-dissipation relation for nonlinear electronic circuits

Authors: Léopold Van Brandt, Jean-Charles Delvenne

Abstract: An extension of fluctuation-dissipation theorem is used to derive a "speed limit" theorem for nonlinear electronic devices. This speed limit provides a lower bound on the dissipation that is incurred when transferring a given amount of electric charge in a certain amount of time with a certain noise level (average variance of the current). This bound, which implies a high energy dissipation for fa… ▽ More An extension of fluctuation-dissipation theorem is used to derive a "speed limit" theorem for nonlinear electronic devices. This speed limit provides a lower bound on the dissipation that is incurred when transferring a given amount of electric charge in a certain amount of time with a certain noise level (average variance of the current). This bound, which implies a high energy dissipation for fast, low-noise operations (such as switching a bit in a digital memory), brings together recent results of stochastic thermodynamics into a form that is usable for practical nonlinear electronic circuits, as we illustrate on a switching circuit made of an nMOS pass gate in a state-of-the-art industrial technology. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Journal ref: VAN BRANDT, Léopold et DELVENNE, Jean-Charles. Noise-dissipation relation for nonlinear electronic circuits. Applied Physics Letters, 2023, vol. 122, no 26

Elastoviscoplastic fluid flow past a circular cylinder

Authors: S. Parvar, K. T. Iqbal, M. N. Ardekani, L. Brandt, O. Tammisola

Abstract: The combined effect of fluid elasticity and yield-stress on the flow past a circular cylinder is studied by two-dimensional direct numerical simulation. We analyze the effects of yield-stress, elasticity, shear-thinning, and shear-thickening on the wake characteristics using the Saramito constitutive model. The elastoviscoplastic (EVP) wake flow is studied at a moderate Reynolds number (Re = 100)… ▽ More The combined effect of fluid elasticity and yield-stress on the flow past a circular cylinder is studied by two-dimensional direct numerical simulation. We analyze the effects of yield-stress, elasticity, shear-thinning, and shear-thickening on the wake characteristics using the Saramito constitutive model. The elastoviscoplastic (EVP) wake flow is studied at a moderate Reynolds number (Re = 100) where two-dimensional vortex shedding occurs in the Newtonian case. We find that in the shear-thinning elastoviscoplastic flow, when yield stress increases, the drag coefficient and root mean square of the lift coefficient both decrease, while the length of the recirculation bubble $L_{RB}$ increases. These changes indicate that the wake oscillation amplitude decreases with an increasing yield stress. For shear-thickening however, the drag coefficient $C_D$ increases at a large Bingham number, and the wake becomes chaotic. The comparison of viscoelastic fluid and EVP fluid reveals that the polymer stresses, tr($τ^p$), decay considerably less downstream of the cylinder in the EVP case, indicating that significant stresses persist at large distances. We observe that shear-thinning competes with elastic and yield stresses and counteracts their effect, while shear-thickening enhances elastic and yield stress effects, so that the flow pattern can change from periodic to a chaotic flow. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Intermittency in turbulent emulsions

Authors: Marco Crialesi-Esposito, Guido Boffetta, Luca Brandt, Sergio Chibbaro, Stefano Musacchio

Abstract: We investigate the statistics of turbulence in emulsions of two-immiscible fluids of same density. We compute for the first time velocity increments between points conditioned to be located in the same phase or in different phases and examine their probability density functions (PDF) and the associated structure functions (SF). This enables us to demonstrate that the the presence of the interface… ▽ More We investigate the statistics of turbulence in emulsions of two-immiscible fluids of same density. We compute for the first time velocity increments between points conditioned to be located in the same phase or in different phases and examine their probability density functions (PDF) and the associated structure functions (SF). This enables us to demonstrate that the the presence of the interface reduces the skewness of the PDF at scales below the Kolmogorov-Hinze scale and therefore the magnitude of the energy flux towards the dissipative scales, which is quantified by the third-order SF. The analysis of the higher order SFs shows that multiphase turbulence is more intermittent than single-phase turbulence. In particular, the local scaling exponents of the SFs display a saturation about the Kolmogorov-Hinze scale and below, which indicates the presence of large velocity gradients across the interface. Interestingly, the statistics approach of classic homogeneous isotropic turbulence when significantly increasing the viscosity of the dispersed phase. △ Less

Submitted 4 January, 2023; originally announced January 2023.

Rheology of dense fiber suspensions: Origin of yield stress, shear thinning and normal stress differences

Authors: Monsurul Khan, Rishabh V. More, Luca Brandt, Arezoo M. Ardekani

Abstract: We explain the origins of yield stress, shear-thinning, and normal stress differences in rigid fiber suspensions. We investigate the interplay between the hydrodynamic, colloidal attractive and repulsive, and inter-fiber contact interactions. The shear-thinning viscosity and finite yield stress obtained from the computational model are in quantitative agreement with experiential results from the l… ▽ More We explain the origins of yield stress, shear-thinning, and normal stress differences in rigid fiber suspensions. We investigate the interplay between the hydrodynamic, colloidal attractive and repulsive, and inter-fiber contact interactions. The shear-thinning viscosity and finite yield stress obtained from the computational model are in quantitative agreement with experiential results from the literature. In this study, we show that attractive interactions result in yield stress and shear-thinning rheology in the suspensions of rigid fibers. This is an important finding, given the ongoing discussion regarding the origin of the yield stress for suspensions of fibers. The ability of the proposed model to quantitatively predict the rheology is not limited to only shear thinning and yield stress but also extends to normal stresses. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 17 pages, 12 figures

The role of wetting on the flow of two immiscible fluids in porous media

Authors: Armin Shahmardi, Salar Zamani Salimi, Outi Tammisola, Luca Brandt, Marco Edoardo Rosti

Abstract: We study the role of the capillary number, $Ca$ and of the surface wettability on the dynamics of the interface between an invading and a defending phase in a porous medium by means of numerical simulations. We employ a hybrid phase field-immersed boundary approach to successfully model the contact line dynamics over the solid objects. Using a phase-field method which naturally incorporates dynami… ▽ More We study the role of the capillary number, $Ca$ and of the surface wettability on the dynamics of the interface between an invading and a defending phase in a porous medium by means of numerical simulations. We employ a hybrid phase field-immersed boundary approach to successfully model the contact line dynamics over the solid objects. Using a phase-field method which naturally incorporates dynamic wetting we eliminate the need for empirical contact line models to address contact line singularity. We map the two dominant modes governing the motion of the interface, namely, capillary fingering, and stable penetration, in the ($Ca$-$θ$) plane, with $θ$ the static contact angle prescribed at the solid pores. Capillary fingering dominates at lower values of $Ca$ and pores hydrophobic to the invading phase, while a stable penetration is observed on hydrophillic surfaces. We present new measurements and analyses, including curvature probability density functions (pdf) and average curvature. We also show that the pressure needed for the invading phase to advance at constant flow rate decreases with the capillary number, and increases with the contact angle at the capillary numbers considered. The latter is due to a significant increase of the length of the interface in the case of capillary fingering. Finally, we show that it is possible to identify the different interfacial modes by measuring the penetration length and velocity during the medium filling. △ Less

Submitted 30 May, 2024; v1 submitted 22 October, 2022; originally announced October 2022.

Comments: 42 pages, 14 figures

Direct TEM observation and quantification of the Gibbs-Thomson effect in a nickel superalloy

Authors: Chryssanthi Papadaki, Wei Li, Christopher S. Allen, Mohsen Danaie, León Romano Brandt, Alexander M. Korsunsky

Abstract: Gibbs-Thompson effect is the general term referring to the influence of interfaces on the course of phase transformations such as precipitation or solidification. Whilst attention is most often focused on the Gibbs-Thomson effect on nucleation, growth and coarsening, the present study considers the reverse process of precipitate dissolution in a nickel-base superalloy during in situ TEM observatio… ▽ More Gibbs-Thompson effect is the general term referring to the influence of interfaces on the course of phase transformations such as precipitation or solidification. Whilst attention is most often focused on the Gibbs-Thomson effect on nucleation, growth and coarsening, the present study considers the reverse process of precipitate dissolution in a nickel-base superalloy during in situ TEM observation. The presence of several distinct populations of gamma-prime precipitates (primary, secondary, tertiary and grain boundary) allows the differences due to particle size to be quantified and interpreted. Important implications arise for the selection of heat treatment schedules for nickel-base superalloys and other alloy systems. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Comments: 9 pages, 4 Figures

Bounding Variance and Skewness of Fluctuations in Nonlinear Mesoscopic Systems with Stochastic Thermodynamics

Authors: Jean-Charles Delvenne, Léopold Van Brandt

Abstract: Fluctuations arising in nonlinear dissipative systems (diode, transistors, chemical reaction, etc.) subject to an external drive (voltage, chemical potential, etc.) are well known to elude any simple characterization such as the fluctuation-dissipation theorem (also called Johnson-Nyquist law, or Einstein's law in specific contexts). Using results from stochastic thermodynamics, we show that the v… ▽ More Fluctuations arising in nonlinear dissipative systems (diode, transistors, chemical reaction, etc.) subject to an external drive (voltage, chemical potential, etc.) are well known to elude any simple characterization such as the fluctuation-dissipation theorem (also called Johnson-Nyquist law, or Einstein's law in specific contexts). Using results from stochastic thermodynamics, we show that the variance of these fluctuations exceeds the variance predicted by a suitably extended version of Johnson-Nyquist's formula, by an amount that is controlled by the skewness (third moment) of the fluctuations. As a consequence, symmetric fluctuations necessarily obey the extended Johnson-Nyquist formula. This shows the physical inconsistency of Gaussian approximation for the noise arising in some nonlinear models, such as MOS transistors or chemical reactions. More generally, this suggests the need for a stochastic nonlinear systems theory that is compatible with the teachings of thermodynamics. △ Less

Submitted 7 July, 2023; v1 submitted 30 August, 2022; originally announced August 2022.

Comments: 7 pages, 3 figures

Viscoelasticity of suspension of red blood cells under oscillatory shear flow

Authors: Naoki Takeishi, Marco Edoardo Rosti, Naoto Yokoyama, Luca Brandt

Abstract: We present a numerical analysis of the rheology of a suspension of red blood cells (RBCs) for different volume fractions in a wall-bounded, effectively inertialess, small amplitude oscillatory shear (SAOS) flow for a wide range of applied frequencies. The RBCs are modeled as biconcave capsules, whose membrane is an isotropic and hyperelastic material following the Skalak constitutive law. The freq… ▽ More We present a numerical analysis of the rheology of a suspension of red blood cells (RBCs) for different volume fractions in a wall-bounded, effectively inertialess, small amplitude oscillatory shear (SAOS) flow for a wide range of applied frequencies. The RBCs are modeled as biconcave capsules, whose membrane is an isotropic and hyperelastic material following the Skalak constitutive law. The frequency-dependent viscoelasticity in the bulk suspension is quantified by the complex viscosity, defined by the amplitude of the particle shear stress and the phase difference between the stress and shear. SAOS flow basically impedes the deformation of individual RBCs as well as the magnitude of fluid-membrane interactions, resulting in a lower specific viscosity and first and second normal stress differences than in steady shear flow. Although it is known that the RBC deformation alone is sufficient to give rise to shear-thinning, our results show that the complex viscosity weakly depends on the frequency-modulated deformations or orientations of individual RBCs, but rather depends on combinations of the frequency-dependent amplitude and phase difference. The effect of the viscosity ratio between the cytoplasm and plasma and of the capillary number are also assessed. △ Less

Submitted 17 March, 2024; v1 submitted 19 July, 2022; originally announced July 2022.

The interaction of droplet dynamics and turbulence cascade

Authors: Marco Crialesi-Esposito, Sergio Chibbaro, Luca Brandt

Abstract: The dynamics of droplet fragmentation in turbulence is described in the Kolmogorov-Hinze framework. Yet, a quantitative theory is lacking at higher concentrations when strong interactions between the phases and coalescence become relevant, which is common in most flows. Here, we address this issue through a fully-coupled numerical study of the droplet dynamics in a turbulent flow at high Reynolds… ▽ More The dynamics of droplet fragmentation in turbulence is described in the Kolmogorov-Hinze framework. Yet, a quantitative theory is lacking at higher concentrations when strong interactions between the phases and coalescence become relevant, which is common in most flows. Here, we address this issue through a fully-coupled numerical study of the droplet dynamics in a turbulent flow at high Reynolds number. By means of time-space spectral statistics, not currently accessible to experiments, we demonstrate that the characteristic scale of the process, the Hinze scale, can be precisely identified as the scale at which the net energy exchange due to capillarity is zero. Droplets larger than this scale preferentially break up absorbing energy from the flow; smaller droplets, instead, undergo rapid oscillations and tend to coalesce releasing energy to the flow. Further, we link the droplet-size-distribution with the probability distribution of the turbulent dissipation. This shows that key in the fragmentation process is the local flux of energy which dominates the process at large scales, vindicating its locality. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Experimental and numerical investigation of bubble migration in shear flow: deformability-driven chaining and repulsion

Authors: Blandine Feneuil, Kazi Tassawar Iqbal, Atle Jensen, Luca Brandt, Outi Tammisola, Andreas Carlson

Abstract: We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we… ▽ More We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we notice that, for all fluids, the interaction type depends on the relative position of the bubbles. If they are aligned in the vorticity direction, they repel, if not, they attract each other. The simulations show a similar behavior in Newtonian fluids as in viscoelastic and elastoviscoplastic fluids, as long as the capillary number is sufficiently large. This shows that the interaction-related migration of the bubbles is strongly affected by the bubble deformation. We suggest that the cause of migration is the interaction between the heterogeneous pressure fields around the deformed bubbles, due to capillary pressure. △ Less

Submitted 21 April, 2023; v1 submitted 13 May, 2022; originally announced May 2022.

Comments: 20 pages, 19 figures

Evaporating Rayleigh-Bénard convection: prediction of interface temperature and global heat transfer modulation

Authors: Nicoló Scapin, Andreas D. Demou, Luca Brandt

Abstract: We propose an analytical model to estimate the interface temperature $Θ_Γ$ and the Nusselt number $Nu$ for an evaporating two-layer Rayleigh-Bénard configuration in statistically stationary conditions. The model is based on three assumptions: (i) the Oberbeck-Boussinesq approximation can be applied to the liquid phase, while the gas thermophysical properties are generic functions of thermodynamic… ▽ More We propose an analytical model to estimate the interface temperature $Θ_Γ$ and the Nusselt number $Nu$ for an evaporating two-layer Rayleigh-Bénard configuration in statistically stationary conditions. The model is based on three assumptions: (i) the Oberbeck-Boussinesq approximation can be applied to the liquid phase, while the gas thermophysical properties are generic functions of thermodynamic pressure, local temperature, and vapour composition, (ii) the Grossmann-Lohse theory for thermal convection can be applied to the liquid and gas layers separately, (iii) the vapour content in the gas can be taken as the mean value at the gas-liquid interface. We validate this setting using direct numerical simulations (DNS) in a parameter space composed of the Rayleigh number ($10^6\leq Ra\leq 10^8$) and the temperature differential ($0.05\leq\varepsilon\leq 0.20$), which modulates the variation of state variables in the gas layer. To better disentangle the variable property effects on $Θ_Γ$ and $Nu$, simulations are performed in two conditions. First, we consider the case of uniform gas properties except for the gas density and gas-liquid diffusion coefficient. Second, we include the variation of specific heat capacity, dynamic viscosity, and thermal conductivity using realistic equations of state. Irrespective of the employed setting, the proposed model agrees very well with the numerical simulations over the entire range of $Ra-\varepsilon$ investigated. △ Less

Submitted 28 November, 2022; v1 submitted 5 May, 2022; originally announced May 2022.

FluTAS: A GPU-accelerated finite difference code for multiphase flows

Authors: Marco Crialesi-Esposito, Nicolo Scapin, Andreas D. Demou, Marco Edoardo Rosti, Pedro Costa, Filippo Spiga, Luca Brandt

Abstract: We present the Fluid Transport Accelerated Solver, FluTAS, a scalable GPU code for multiphase flows with thermal effects. The code solves the incompressible Navier-Stokes equation for two-fluid systems, with a direct FFT-based Poisson solver for the pressure equation. The interface between the two fluids is represented with the Volume of Fluid (VoF) method, which is mass conserving and well suited… ▽ More We present the Fluid Transport Accelerated Solver, FluTAS, a scalable GPU code for multiphase flows with thermal effects. The code solves the incompressible Navier-Stokes equation for two-fluid systems, with a direct FFT-based Poisson solver for the pressure equation. The interface between the two fluids is represented with the Volume of Fluid (VoF) method, which is mass conserving and well suited for complex flows thanks to its capacity of handling topological changes. The energy equation is explicitly solved and coupled with the momentum equation through the Boussinesq approximation. The code is conceived in a modular fashion so that different numerical methods can be used independently, the existing routines can be modified, and new ones can be included in a straightforward and sustainable manner. FluTAS is written in modern Fortran and parallelized using hybrid MPI/OpenMP in the CPU-only version and accelerated with OpenACC directives in the GPU implementation. We present different benchmarks to validate the code, and two large-scale simulations of fundamental interest in turbulent multiphase flows: isothermal emulsions in HIT and two-layer Rayleigh-Bénard convection. FluTAS is distributed through a MIT license and arises from a collaborative effort of several scientists, aiming to become a flexible tool to study complex multiphase flows. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Numerical simulation of the coalescence-induced polymeric droplet jumping on superhydrophobic surfaces

Authors: Kazem Bazesefidpar, Luca Brandt, Outi Tammisola

Abstract: Self-propelled jumping of two polymeric droplets on superhydrophobic surfaces is investigated by three-dimensional direct numerical simulations. Two identical droplets of a viscoelastic fluid slide, meet and coalesce on a surface with contact angle 180 degrees. The droplets are modelled by the Giesekus constitutive equation, introducing both viscoelasticity and a shear-thinning effects. The Cahn-H… ▽ More Self-propelled jumping of two polymeric droplets on superhydrophobic surfaces is investigated by three-dimensional direct numerical simulations. Two identical droplets of a viscoelastic fluid slide, meet and coalesce on a surface with contact angle 180 degrees. The droplets are modelled by the Giesekus constitutive equation, introducing both viscoelasticity and a shear-thinning effects. The Cahn-Hilliard Phase-Field method is used to capture the droplet interface. The simulations capture the spontaneous coalescence and jumping of the droplets. The effect of elasticity and shear-thinning on the coalescence and jumping is investigated at capillary-inertial and viscous regimes. The results reveal that the elasticity of the droplet changes the known capillary-inertial velocity scaling of the Newtonian drops at large Ohnesorge numbers; the resulting viscoelastic droplet jumps from the surface at larger Ohnesorge numbers than a Newtonian drop, when elasticity gives rise to visible shape oscillations of the merged droplet. The numerical results show that polymer chains are stretched during the coalescence and prior to the departure of two drops, and the resulting elastic stresses at the interface induce the jumping of the liquid out of the surface. This study shows that viscoelasticity, typical of many biological and industrial applications, affects the droplet behaviour on superhydrophobic and self-cleaning surfaces. △ Less

Submitted 15 February, 2022; originally announced February 2022.

Journal ref: Journal of Non-Newtonian Fluid Mechanics 307 (2022), 104872

A dual resolution phase-field solver for wetting of viscoelastic droplets

Authors: Kazem Bazesefidpar, Luca Brandt, Outi Tammisola

Abstract: We present a new and efficient phase-field solver for viscoelastic fluids with moving contact line based on a dual-resolution strategy. The interface between two immiscible fluids is tracked by using the Cahn-Hilliard phase-field model, and the viscoelasticity incorporated into the phase-field framework. The main challenge of this approach is to have enough resolution at the interface to approach… ▽ More We present a new and efficient phase-field solver for viscoelastic fluids with moving contact line based on a dual-resolution strategy. The interface between two immiscible fluids is tracked by using the Cahn-Hilliard phase-field model, and the viscoelasticity incorporated into the phase-field framework. The main challenge of this approach is to have enough resolution at the interface to approach the sharp-interface methods. The method presented here addresses this problem by solving the phase field variable on a mesh twice as fine as that used for the velocities, pressure, and polymer-stress constitutive equations. The method is based on second-order finite differences for the discretization of the fully coupled Navier-Stokes, polymeric constitutive and Cahn-Hilliard equations, and it is implemented in a 2D pencil-like domain decomposition to benefit from existing highly-scalable parallel algorithms. A FFT-based solver is used for the Helmholtz and Poisson equations with different global sizes. The splitting method proposed by previous authors is used to impose the dynamic contact angle boundary conditions in the case of large density and viscosity ratios. The implementation is validated against experimental data and previous numerical studies in 2D and 3D. The results indicate that the dual-resolution approach produces nearly identical results while saving computational time for both Newtonian and viscoelastic flows in 3D. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Journal ref: International Journal for Numerical Methods for Fluids 94 (2022), 1517-1541

Modulation of homogeneous and isotropic turbulence in emulsions

Authors: Marco Crialesi-Esposito, Marco Edoardo Rosti, Sergio Chibbaro, Luca Brandt

Abstract: We present a numerical study of emulsions in homogeneous and isotropic turbulence at $Re_λ=137$. The problem is addressed via Direct Numerical Simulations (DNS), where the Volume of Fluid (VOF) is used to represent the complex features of the liquid-liquid interface. We consider a mixture of two iso-density fluids, where fluid properties are varied with the goal of understanding their role in turb… ▽ More We present a numerical study of emulsions in homogeneous and isotropic turbulence at $Re_λ=137$. The problem is addressed via Direct Numerical Simulations (DNS), where the Volume of Fluid (VOF) is used to represent the complex features of the liquid-liquid interface. We consider a mixture of two iso-density fluids, where fluid properties are varied with the goal of understanding their role in turbulence modulation, in particular the volume fraction ($0.03<α<0.5$), viscosity ratio ($0.01<μ_d/μ_c<100$) and large scale Weber number ($10.6<We_\mathcal{L}<106.5$). The analysis, performed by studying integral quantities and spectral scale-by-scale analysis, reveals that energy is consistently transported from large to small scales by the interface, and no inverse cascade is observed. Furthermore, the total surface is found to be directly proportional to the amount of energy transported, while viscosity and surface tension alter the dynamic that regulates energy transport. We also observe the $-10/3$ and $-3/2$ scaling on droplet size distributions, suggesting that the dimensional arguments which led to their derivation are verified in HIT conditions. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Spin transport-induced damping of coherent THz spin dynamics in iron

Authors: L. Brandt, R. Verba, N. Liebing, M. Ribow, I. Razdolski, V. Tyberkevych, A. Slavin, G. Woltersdorf, A. Melnikov

Abstract: We study the damping of perpendicular standing spin-waves (PSSWs) in ultrathin Fe films at frequencies up to 2.4 THz. The PSSWs are excited by optically generated ultrashort spin current pulses, and probed optically in the time domain. Analyzing the wavenumber and thickness dependence of the damping, we demonstrate that at sufficiently large wave vectors $k$ the damping is dominated by spin transp… ▽ More We study the damping of perpendicular standing spin-waves (PSSWs) in ultrathin Fe films at frequencies up to 2.4 THz. The PSSWs are excited by optically generated ultrashort spin current pulses, and probed optically in the time domain. Analyzing the wavenumber and thickness dependence of the damping, we demonstrate that at sufficiently large wave vectors $k$ the damping is dominated by spin transport effects scaling with k^4 and limiting the frequency range of observable PSSWs. Although this contribution is known to originate in the spin diffusion, we argue that at moderate and large k a more general description is necessary and develop a model where the 'transverse spin mean free path' is the a key parameter, and estimate it to be ~0.5 nm. △ Less

Submitted 5 October, 2021; v1 submitted 27 July, 2021; originally announced July 2021.

Control of ultrashort spin current pulses in metallic multilayers

Authors: Alexey Melnikov, Liane Brandt, Niklas Liebing, Mirko Ribow, Ingrid Mertig, Georg Woltersdorf

Abstract: We study the emission of femtosecond spin current pulses at Fe/Au interfaces. Using optical second harmonic generation we demonstrate the control of pulse shape and duration by varying the emitter thickness and show that it is determined by the parameters of hot electrons emission and the diffusive transport. Using a simple model of electron emission we develop a description of superdiffusive spin… ▽ More We study the emission of femtosecond spin current pulses at Fe/Au interfaces. Using optical second harmonic generation we demonstrate the control of pulse shape and duration by varying the emitter thickness and show that it is determined by the parameters of hot electrons emission and the diffusive transport. Using a simple model of electron emission we develop a description of superdiffusive spin transport in Au allowing to extract electron velocity and scattering rates from the experimental data. The importance of carrier multiplication in Fe is demonstrated. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Irreversibility and rate dependence in sheared adhesive suspensions

Authors: Zhouyang Ge, Raffaella Martone, Luca Brandt, Mario Minale

Abstract: Recent experiments report that slowly-sheared noncolloidal particle suspensions can exhibit unexpected rate($ω$)-dependent complex viscosities in oscillatory shear, despite a constant relative viscosity in steady shear. Using a minimal hydrodynamic model, we show that a weak interparticle attraction reproduces this behavior. At volume fractions $φ=20\sim50$%, the complex viscosities in both experi… ▽ More Recent experiments report that slowly-sheared noncolloidal particle suspensions can exhibit unexpected rate($ω$)-dependent complex viscosities in oscillatory shear, despite a constant relative viscosity in steady shear. Using a minimal hydrodynamic model, we show that a weak interparticle attraction reproduces this behavior. At volume fractions $φ=20\sim50$%, the complex viscosities in both experiments and simulations display power-law reductions in shear, with a $φ$-dependent exponent maximum at $φ=40$%, resulting from the interplay between hydrodynamic, collision and adhesive interactions. Furthermore, this rate dependence is accompanied by diverging particle diffusivities and pronounced cluster formations even at small oscillation amplitudes $γ_0$. Previous studies established that suspensions transition from reversible absorbing states to irreversible diffusing states when $γ_0$ exceeds a $φ$-dependent critical value $γ_{0,φ}^c$. Here, we show that a second transition to irreversibility occurs below an $ω$-dependent critical amplitude, $γ_{0,ω}^c \leq γ_{0,φ}^c$, in the presence of weak attractions. △ Less

Submitted 27 June, 2021; originally announced June 2021.

Comments: 5 pages, 5 figures

Rheology of concentrated suspension of fibers with load dependent friction coefficient

Authors: Monsurul Khan, Rishabh V. More, Arash Alizad Banaei, Luca Brandt, Arezoo M. Ardekani

Abstract: We numerically investigate the effects of fiber aspect ratio, roughness, flexibility, and flow inertia on the rheology of concentrated suspensions. We perform direct numerical simulations modeling the fibers, suspended in an incompressible Newtonian fluid, as continuous flexible slender bodies obeying the Euler-Bernoulli beam equation. An immersed Boundary Method (IBM) is employed to solve for the… ▽ More We numerically investigate the effects of fiber aspect ratio, roughness, flexibility, and flow inertia on the rheology of concentrated suspensions. We perform direct numerical simulations modeling the fibers, suspended in an incompressible Newtonian fluid, as continuous flexible slender bodies obeying the Euler-Bernoulli beam equation. An immersed Boundary Method (IBM) is employed to solve for the motion of fibers. In concentrated suspensions, fibers come into contact due to the presence of asperities on their surface. We assume a normal load-dependent friction coefficient to model contact dynamics and friction, which successfully recovers the shear-thinning behaviour observed in experiments. First, we report the shear rate dependent behavior and the increase in the suspension viscosity with the increasing volume fraction of fibers, fiber roughness, and rigidity. The increase in the viscosity is stronger at a lower shear rate and finite inertia. Simulation results indicate that for the concentrated suspensions, contact stresses between fibers form the dominant contribution to the viscosity. Moreover, we find the first normal stress difference to be positive and to increase with the Reynolds number for flexible fibers. Lastly, we explore the divergence of viscosity for different aspect ratios and roughness of the fibers and predict the jamming volume fraction by fitting the data to the Maron-Pierce law. The jamming volume fraction decreases with increasing the aspect ratio and roughness. We conclude that the contact forces and interparticle friction become one of the crucial factors governing the rheology of flexible fiber suspensions at high concentrations. △ Less

Submitted 22 January, 2025; v1 submitted 14 June, 2021; originally announced June 2021.

Toward Automatic Interpretation of 3D Plots

Authors: Laura E. Brandt, William T. Freeman

Abstract: This paper explores the challenge of teaching a machine how to reverse-engineer the grid-marked surfaces used to represent data in 3D surface plots of two-variable functions. These are common in scientific and economic publications; and humans can often interpret them with ease, quickly gleaning general shape and curvature information from the simple collection of curves. While machines have no su… ▽ More This paper explores the challenge of teaching a machine how to reverse-engineer the grid-marked surfaces used to represent data in 3D surface plots of two-variable functions. These are common in scientific and economic publications; and humans can often interpret them with ease, quickly gleaning general shape and curvature information from the simple collection of curves. While machines have no such visual intuition, they do have the potential to accurately extract the more detailed quantitative data that guided the surface's construction. We approach this problem by synthesizing a new dataset of 3D grid-marked surfaces (SurfaceGrid) and training a deep neural net to estimate their shape. Our algorithm successfully recovers shape information from synthetic 3D surface plots that have had axes and shading information removed, been rendered with a variety of grid types, and viewed from a range of viewpoints. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Comments: 16 pages, 12 figures, accepted to the 16th International Conference on Document Analysis and Recognition (ICDAR21)

The effect of droplet coalescence on drag in turbulent channel flows

Authors: Ianto Cannon, Daulet Izbassarov, Outi Tammisola, Luca Brandt, Marco E. Rosti

Abstract: We study the effect of droplet coalescence on turbulent wall-bounded flows, by means of direct numerical simulations. In particular, the volume-of-fluid and front-tracking methods are used to simulate turbulent channel flows containing coalescing and non-coalescing droplets, respectively. We find that coalescing droplets have a negligible effect on the drag, whereas the non-coalescing ones steadil… ▽ More We study the effect of droplet coalescence on turbulent wall-bounded flows, by means of direct numerical simulations. In particular, the volume-of-fluid and front-tracking methods are used to simulate turbulent channel flows containing coalescing and non-coalescing droplets, respectively. We find that coalescing droplets have a negligible effect on the drag, whereas the non-coalescing ones steadily increase drag as the volume fraction of the dispersed phase increases: indeed, at 10\% volume fraction, the non-coalescing droplets show a 30\% increase in drag, whereas the coalescing droplets show less than 4\% increase. We explain this by looking at the wall-normal location of droplets in the channel and show that non-coalescing droplets enter the viscous sublayer, generating an interfacial shear stress which reduces the budget for viscous stress in the channel. On the other hand, coalescing droplets migrate towards the bulk of the channel forming large aggregates, which hardly affect the viscous shear stress while damping the Reynolds shear stress. We prove this by relating the mean viscous shear stress integrated in the wall-normal direction to the centreline velocity. △ Less

Submitted 19 July, 2021; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 11 pages, 7 figures

MSC Class: 76T10

Journal ref: Physics of Fluids 33, 085112 (2021)

Effective exchange interaction for terahertz spin waves in iron layers

Authors: Liane Brandt, Ulrike Ritzmann, Niklas Liebing, Mirko Ribow, Ilya Razdolski, Piet Brouwer, Alexey Melnikov, Georg Woltersdorf

Abstract: The exchange stiffness is a central material parameter of all ferromagnetic materials. Its value controls the Curie temperature as well as the dynamic properties of spin waves to a large extend. Using ultrashort spin current pulses we excite perpendicular standing spin waves (PSSW) in ultrathin epitaxial iron layers at frequencies of up to 2.4 THz. Our analysis shows that for the PSSWs the observe… ▽ More The exchange stiffness is a central material parameter of all ferromagnetic materials. Its value controls the Curie temperature as well as the dynamic properties of spin waves to a large extend. Using ultrashort spin current pulses we excite perpendicular standing spin waves (PSSW) in ultrathin epitaxial iron layers at frequencies of up to 2.4 THz. Our analysis shows that for the PSSWs the observed exchange stiffness of iron is about 20% smaller compared to the established iron bulk value. In addition, we find an interface-related reduction of the effective exchange stiffness for layers with the thickness below 10 nm. To understand and discuss the possible mechanisms of the exchange stiffness reduction we develop an analytical 1D-model. In doing so we find that the interface induced reduction of the exchange stiffness is mode-dependent. △ Less

Submitted 2 June, 2021; originally announced June 2021.

Journal ref: Phys. Rev. B 104, 094415 (2021)

Plasmonic Spin-Hall Effect of propagating Surface Plasmon Polaritons in Ni$_{80}$Fe$_{20}$ microstructures

Authors: Maximilian Paleschke, Cheng-Tien Chiang, Liane Brandt, Niklas Liebing, Georg Woltersdorf, Wolf Widdra

Abstract: Photoexcitation and shaping of a propagating surface plasmon polariton (SPP) on silver and gold microstructures are well established and lead to the discovery of the plasmonic spin-Hall effect recently. Whereas silver is often the material of choice due to its exceptional low plasma frequency and weak damping, similar observations have not been reported for ferromagnetic metals. In this work, we r… ▽ More Photoexcitation and shaping of a propagating surface plasmon polariton (SPP) on silver and gold microstructures are well established and lead to the discovery of the plasmonic spin-Hall effect recently. Whereas silver is often the material of choice due to its exceptional low plasma frequency and weak damping, similar observations have not been reported for ferromagnetic metals. In this work, we report on propagating SPPs on Ni$_{80}$Fe$_{20}$ microstructures imaged by photoemission electron microscopy (PEEM) in combination with a tunable femtosecond laser system at MHz repetition rate. Circular dichroic (CD) images in threshold PEEM show clear edge-induced SPPs with sub-micrometer wavelength and propagation length of about 3.5 $μ$m. Analysis of the interference patterns as well as the coupling of the optical spin angular momentum to the observed fringe fields reveal propagation characteristics exclusive to evanescent waves and the presence of the plasmonic spin-Hall effect. Our work provides direct evidence that many materials with a high plasma frequency allow for excitation and observation of propagating SPPs at the dielectric/metal interface via CD PEEM imaging, enabling magnetoplasmonic investigation of common ferromagnets on nanometer length and femtosecond time scales. △ Less

Submitted 4 June, 2021; v1 submitted 26 May, 2021; originally announced May 2021.

Comments: 13 pages, 5 figures, to be published in New Journal of Physics

Orientation instability of settling spheroids in a linearly density stratified fluid

Authors: Rishabh V. More, Mehdi N. Ardekani, Luca Brandt, Arezoo M. Ardekani

Abstract: Much work has been done to understand the settling dynamics of spherical particles in a homogeneous and a stratified fluid. However, the effects of shape anisotropy on the settling dynamics of a particle in a stratified fluid are not completely understood. To this end, we perform numerical simulations for settling oblate and prolate spheroids in a stratified fluid. We present the results for the R… ▽ More Much work has been done to understand the settling dynamics of spherical particles in a homogeneous and a stratified fluid. However, the effects of shape anisotropy on the settling dynamics of a particle in a stratified fluid are not completely understood. To this end, we perform numerical simulations for settling oblate and prolate spheroids in a stratified fluid. We present the results for the Reynolds number, $Re$, in the range $80-250$ and the Richardson number, $Ri$, in the range $0-10$. We find that both the oblate and prolate spheroids reorient to the edge-wise and partially edge-wise orientations, respectively, as they settle in a stratified fluid completely different from the steady-state broad-side on orientation observed in a homogeneous fluid. We observe that reorientation instabilities emerge when the velocity magnitude of the spheroids fall below a particular threshold. We also report the enhancement of the drag on the particle from stratification. The torque due to buoyancy effects tries to orient the spheroid in an edge-wise orientation while the hydrodynamic torque tries to orient it to a broad-side on orientation. Below the velocity threshold, the buoyancy torque dominates; resulting in the onset of reorientation instability. Finally, the asymmetry in the distribution of the baroclinic vorticity generation term around the spheroids explains the onset of the reorientation instability. △ Less

Submitted 21 January, 2025; v1 submitted 20 April, 2021; originally announced April 2021.

Finite-size evaporating droplets in weakly compressible homogeneous shear turbulence

Authors: Nicolò Scapin, Federico Dalla Barba, Giandomenico Lupo, Marco Edoardo Rosti, Christophe Duwig, Luca Brandt

Abstract: We perform interface-resolved simulations of finite-size evaporating droplets in weakly-compressible homogeneous shear turbulence (HST). The study is conducted by varying three dimensionless physical parameters: the initial gas temperature over the critical temperature $T_{g,0}/T_c$, the initial droplet diameter over the Kolmogorov scale $d_0/η$ and the surface tension, i.e. the shear-based Weber… ▽ More We perform interface-resolved simulations of finite-size evaporating droplets in weakly-compressible homogeneous shear turbulence (HST). The study is conducted by varying three dimensionless physical parameters: the initial gas temperature over the critical temperature $T_{g,0}/T_c$, the initial droplet diameter over the Kolmogorov scale $d_0/η$ and the surface tension, i.e. the shear-based Weber number, $We_{\mathcal{S}}$. For the smallest $We_{\mathcal{S}}$, we first discuss the impact on the evaporation rate of the three thermodynamic models employed to evaluate the gas thermophysical properties: a constant property model and two variable-properties approaches where either the gas density or all the gas properties are allowed to vary. Taking this last approach as reference, the model assuming constant gas properties and evaluated with the "1/3" rule, is shown to predict the evaporation rate better than the model where the only variable property is the gas density. Moreover, we observe that the well-known Frössling/Ranz-Marshall correlation underpredicts the Sherwood number at low temperatures, $T_{g,0}/T_c=0.75$. Next, we show that the ratio between the actual evaporation rate in turbulence and the one computed in stagnant condition is always much higher than one for weakly deformable droplets: it decreases with $T_{g,0}/T_c$ without approaching unity at the highest $T_{g,0}/T_c$ considered. This suggests an evaporation enhancement due to turbulence also in conditions typical of combustion applications. Finally, we examine the overall evaporation rate and the local interfacial mass-flux at higher $We_{\mathcal{S}}$, showing a positive correlation between evaporation rate and interfacial curvature, especially at the lowest $T_{g,0}/T_c$. △ Less

Submitted 9 February, 2022; v1 submitted 20 April, 2021; originally announced April 2021.

A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer

Authors: Andreas D. Demou, Nicoló Scapin, Marica Pelanti, Luca Brandt

Abstract: This study presents a novel pressure-based methodology for the efficient numerical solution of a four-equation two-phase diffuse interface model. The proposed methodology has the potential to simulate low-Mach flows with mass transfer. In contrast to the classical conservative four-equation model formulation, the adopted set of equations features volume fraction, temperature, velocity and pressure… ▽ More This study presents a novel pressure-based methodology for the efficient numerical solution of a four-equation two-phase diffuse interface model. The proposed methodology has the potential to simulate low-Mach flows with mass transfer. In contrast to the classical conservative four-equation model formulation, the adopted set of equations features volume fraction, temperature, velocity and pressure as the primary variables. The model includes the effects of viscosity, surface tension, thermal conductivity and gravity, and has the ability to incorporate complex equations of state. Additionally, a Gibbs free energy relaxation procedure is used to model mass transfer. A key characteristic of the proposed methodology is the use of high performance and scalable solvers for the solution of the Helmholtz equation for the pressure, which drastically reduces the computational cost compared to analogous density-based approaches. We demonstrate the capabilities of the methodology to simulate flows with large density and viscosity ratios through extended verification against a range of different test cases. Finally, the potential of the methodology to tackle challenging phase change flows is demonstrated with the simulation of three-dimensional nucleate boiling. △ Less

Submitted 11 October, 2021; v1 submitted 2 April, 2021; originally announced April 2021.

Journal ref: Journal of Computational Physics, Volume 448 (2022) 110730

A fully Eulerian hybrid Immersed Boundary-Phase Field Model for contact line dynamics on complex geometries

Authors: Armin Shahmardi, Marco Edoardo Rosti, Outi Tammisola, Luca Brandt

Abstract: We present a fully Eulerian hybrid immersed-boundary/phase-field model to simulate wetting and contact line motion over any arbitrary geometry. The solid wall is described with a volume-penalisation ghost-cell immersed boundary whereas the interface between the two fluids by a diffuse-interface method. The contact line motion on the complex wall is prescribed via slip velocity in the momentum equa… ▽ More We present a fully Eulerian hybrid immersed-boundary/phase-field model to simulate wetting and contact line motion over any arbitrary geometry. The solid wall is described with a volume-penalisation ghost-cell immersed boundary whereas the interface between the two fluids by a diffuse-interface method. The contact line motion on the complex wall is prescribed via slip velocity in the momentum equation and static/dynamic contact angle condition for the order parameter of the Cahn-Hilliard model. This combination requires accurate computations of the normal and tangential gradients of the scalar order parameter and of the components of the velocity. However, the present algorithm requires the computation of averaging weights and other geometrical variables as a preprocessing step. Several validation tests are reported in the manuscript, together with 2D simulations of a droplet spreading over a sinusoidal wall with different contact angles and slip length and a spherical droplet spreading over a sphere, showing that the proposed algorithm is capable to deal with the three-phase contact line motion over any complex wall. The Eulerian feature of the algorithm facilitates the implementation and provides a straight-forward and potentially highly scalable parallelisation. The employed parallelisation of the underlying Navier-Stokes solver can be efficiently used for the multiphase part as well. The procedure proposed here can be directly employed to impose any types of boundary conditions (Neumann, Dirichlet and mixed) for any field variable evolving over a complex geometry, modelled with an immersed-boundary approach (for instance, modelling deformable biological membranes, red blood cells, solidification, evaporation and boiling, to name a few) △ Less

Submitted 25 May, 2021; v1 submitted 1 April, 2021; originally announced April 2021.

Comments: 52 pages, 19 figures, Submitted to Journal of Computational Physics

Laser-induced terahertz spin transport in magnetic nanostructures arises from the same force as ultrafast demagnetization

Authors: R. Rouzegar, L. Brandt, L. Nadvornik, D. A. Reiss, A. L. Chekhov, O. Gueckstock, C. In, M. Wolf, T. S. Seifert, P. W. Brouwer, G. Woltersdorf, T. Kampfrath

Abstract: Laser-induced terahertz spin transport (TST) and ultrafast demagnetization (UDM) are central but so far disconnected phenomena in femtomagnetism and terahertz spintronics. Here, we use broadband terahertz emission spectroscopy to reliably measure both processes in one setup. We find that the rate of UDM of a single ferromagnetic metal film F has the same time evolution as the flux of TST from F in… ▽ More Laser-induced terahertz spin transport (TST) and ultrafast demagnetization (UDM) are central but so far disconnected phenomena in femtomagnetism and terahertz spintronics. Here, we use broadband terahertz emission spectroscopy to reliably measure both processes in one setup. We find that the rate of UDM of a single ferromagnetic metal film F has the same time evolution as the flux of TST from F into an adjacent normal-metal layer N. This remarkable agreement shows that UDM and TST are driven by the same force, which is fully determined by the state of the ferromagnet. An analytical model consistently and quantitatively explains our observations. It reveals that both UDM in F and TST in the F|N stack arise from a generalized spin voltage, which is defined for arbitrary, nonthermal electron distributions. We also conclude that contributions due to a possible temperature difference between F and N are minor and that the spin-current amplitude can, in principle, be increased by one order of magnitude. In general, our findings allow one to apply the vast knowledge of UDM to TST, thereby opening up new pathways toward large-amplitude terahertz spin currents and, thus, energy-efficient ultrafast spintronic devices. △ Less

Submitted 25 May, 2021; v1 submitted 22 March, 2021; originally announced March 2021.

Comments: 23 pages

Near-wall turbulence modulation by small inertial particles

Authors: Pedro Costa, Luca Brandt, Francesco Picano

Abstract: We use interface-resolved simulations to study near-wall turbulence modulation by small inertial particles, much denser than the fluid, in dilute/semi-dilute conditions. We considered three bulk solid mass fractions, $Ψ=0.34\%$, $3.37\%$ and $33.7\%$, with only the latter two showing turbulence modulation. The increase of the drag is strong at $Ψ=3.37\%$, but mild in the densest case. Actually, tw… ▽ More We use interface-resolved simulations to study near-wall turbulence modulation by small inertial particles, much denser than the fluid, in dilute/semi-dilute conditions. We considered three bulk solid mass fractions, $Ψ=0.34\%$, $3.37\%$ and $33.7\%$, with only the latter two showing turbulence modulation. The increase of the drag is strong at $Ψ=3.37\%$, but mild in the densest case. Actually, two distinct regimes of turbulence modulation emerge: for smaller mass fractions, the turbulence statistics are weakly affected and the near-wall particle accumulation increases the drag so the flow appears as a single phase flow at slightly higher Reynolds number. Conversely, at higher mass fractions, the particles modulate the turbulent dynamics over the entire flow, and the interphase coupling becomes more complex. In this case, fluid Reynolds stresses are attenuated, but the inertial particle dynamics increases the drag via correlated velocity fluctuations leading to an overall drag increase. Hence, we conclude that, although particles at high mass fractions reduce the fluid turbulent drag, the solid phase inertial dynamics may still increase the overall drag. However, inspection of the streamwise momentum budget in the two-way coupling limit of vanishing volume fraction, but finite mass fraction, indicates that this trend could reverse at even higher particle load. △ Less

Submitted 16 July, 2021; v1 submitted 23 February, 2021; originally announced February 2021.

Journal ref: J. Fluid Mech. 922 (2021) A9

Fiber Tracking Velocimetry for two-point statistics of turbulence

Authors: Stefano Brizzolara, Marco Edoardo Rosti, Stefano Olivieri, Luca Brandt, Markus Holzner, Andrea Mazzino

Abstract: We propose and validate a novel experimental technique to measure two-point statistics of turbulent flows. It consists in spreading rigid fibers in the flow and tracking their position and orientation in time and therefore been named ``Fiber Tracking Velocimetry'' (FTV). By choosing different fiber lengths, i.e. within the inertial or dissipative range of scales, the statistics of turbulence fluct… ▽ More We propose and validate a novel experimental technique to measure two-point statistics of turbulent flows. It consists in spreading rigid fibers in the flow and tracking their position and orientation in time and therefore been named ``Fiber Tracking Velocimetry'' (FTV). By choosing different fiber lengths, i.e. within the inertial or dissipative range of scales, the statistics of turbulence fluctuations at the selected lengthscale can be probed accurately by simply measuring the fiber velocity at its two ends, and projecting it along the transverse-to-the-fiber direction. By means of fully-resolved direct numerical simulations and experiments, we show that these fiber-based transverse velocity increments are statistically equivalent to the (unperturbed) flow transverse velocity increments. Moreover, we show that the turbulent energy dissipation rate can be accurately measured exploiting sufficiently short fibers. The technique has been tested against standard Particle Tracking Velocimetry (PTV) of flow tracers with excellent agreement. Our technique overcomes the well-known problem of PTV to probe two-point statistics reliably because of the fast relative diffusion in turbulence that prevents the mutual distance between particles to remain constant at the lengthscale of interest. This problem, making it difficult to obtain converged statistics for a fixed separation distance, is even more dramatic for natural flows in open domains. A prominent example are oceanic currents, where drifters (i.e.~the tracer-particle counterpart used in field measurements) disperse quickly, but at the same time their number has to be limited to save costs. Inspired by our laboratory experiments, we propose pairs of connected drifters as a viable option to solve the issue. △ Less

Submitted 13 July, 2021; v1 submitted 29 October, 2020; originally announced October 2020.

Comments: 15 pages, 15 figures

Journal ref: Phys. Rev. X 11, 031060 (2021)

Suspensions of deformable particles in Poiseuille flows at finite inertia

Authors: Luigi Filippo Chiara, Marco Edoardo Rosti, Francesco Picano, Luca Brandt

Abstract: We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive… ▽ More We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive relation, and the flow is characterized by three main dimensionless parameters, namely the solid volume fraction, the Reynolds and capillary numbers. The dependency of the effective viscosity on these three quantities is investigated to study the inertial effects on a suspension of deformable particles. It can be observed that the suspension has a shear-thinning behavior, and the reduction in effective viscosity for high shear rates is emphasized in denser configurations. The separate analysis of the Reynolds and capillary numbers reveal that the effective viscosity depends more on the capillary than on the Reynolds number. In addition, our simulations exhibit a consistent tendency for deformable particles to move towards the center of the channel, where the shear rate is low. This phenomenon is particularly marked for very dilute suspensions, where a whole region near the wall is empty of particles. Furthermore, when the volume fraction is increased this near-wall region is gradually occupied, because of higher mutual particle interactions. Deformability also plays an important role in the process. Indeed, at high capillary numbers, particles are more sensitive to shear rate variations and can modify their shape more easily to accommodate a greater number of particles in the central region of the channel. △ Less

Submitted 20 October, 2020; originally announced October 2020.