-
Nanomechanical behavior of pentagraphyne-based single-layer and nanotubes through reactive classical molecular dynamics
Authors:
J. M. De Sousa,
W. H. S. Brandão,
W. L. A. P. Silva,
L. A. Ribeiro Junior,
D. S. Galvão,
M. L. Pereira Júnior
Abstract:
In a recent theoretical study, a new 2D carbon allotrope called pentagraphyne (PG-yne) was proposed. This allotrope is derived from pentagraphene by introducing acetylenic linkages between sp3 and sp2 hybridized carbon atoms. Due to its interesting electronic and structural properties, it is of interest to investigate the mechanical behavior of PG-yne in both monolayer and nanotube topologies. To…
▽ More
In a recent theoretical study, a new 2D carbon allotrope called pentagraphyne (PG-yne) was proposed. This allotrope is derived from pentagraphene by introducing acetylenic linkages between sp3 and sp2 hybridized carbon atoms. Due to its interesting electronic and structural properties, it is of interest to investigate the mechanical behavior of PG-yne in both monolayer and nanotube topologies. To achieve this, we performed fully atomistic reactive (ReaxFF) molecular dynamics simulations, and our results show that Young's modulus average of PG-yne monolayers is approximately 913 GPa, at room temperature. In comparison, it ranges from 497-789 GPa for the nanotubes studied. Furthermore, we observed that PG-yne monolayers exhibit a direct transition from elastic to complete fracture under critical strain without a plastic regime. In contrast, some PG-yne nanotubes exhibit an extended flat plastic regime before total fracture.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Exploring the Elastic Properties and Fracture Patterns of Me-Graphene Monolayers and Nanotubes through Reactive Molecular Dynamics Simulations
Authors:
Marcelo L. Pereira Junior,
José. M. De Sousa,
Wjefferson H. S. Brandão,
Douglas. S. Galvão,
Alexandre F. Fonseca,
Luiz A. Ribeiro Junior
Abstract:
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patte…
▽ More
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patterns. Our results indicate that Young's modulus of MeG monolayers is about 414 GPa and in the range of 421-483 GPa for the nanotubes investigated here. MeG monolayers and MeGNTs directly undergo from elastic to complete fracture under critical strain without a plastic regime.
△ Less
Submitted 23 October, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
First-Principles and Reactive Molecular Dynamics Study of the Elastic Properties of Pentahexoctite-based Nanotubes
Authors:
W. H. S. Brandão,
J. M. De Sousa,
A. L. Aguiar,
D. S. Galvão,
L. A. Ribeiro Junior,
Alexandre F. Fonseca
Abstract:
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculat…
▽ More
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculations. Here, we carried out fully-atomistic simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the PHNTs elastic properties and fracture patterns. We have investigated the mechanical properties behavior as a function of the tube diameter and temperature regimes. Our results showed that the PHNTs, when subjected to large tensile strains, undergo abrupt structural transitions exhibiting brittle fracture patterns without a plastic regime.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
A Computational Study On the Mechanical Properties of Pentahexoctite Single-layer: Combining DFT and Classical Molecular Dynamics Simulations
Authors:
W. H. S. Brandão,
A. L. Aguiar,
L. A. Ribeiro Júnior,
D. S. Galvão,
J. M. De Sousa
Abstract:
Studies aimed at designing new allotropic forms of carbon have received much attention. Recently, a new 2D graphene-like allotrope named Pentahexoctite was theoretically proposed. Pentahexoctite has a metallic signature, and its structure consists of continuous 5-6-8 rings of carbon atoms with sp2 hybridization. Here, we carried out fully-atomistic computational simulations, combining reactive (Re…
▽ More
Studies aimed at designing new allotropic forms of carbon have received much attention. Recently, a new 2D graphene-like allotrope named Pentahexoctite was theoretically proposed. Pentahexoctite has a metallic signature, and its structure consists of continuous 5-6-8 rings of carbon atoms with sp2 hybridization. Here, we carried out fully-atomistic computational simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the elastic properties and fracture patterns of Pentahexoctite monolayer. Results revealed a Young's Modulus of 0.74 TPa, smaller than the graphene one (about 1.0 TPa). The Pentahexoctite monolayer, when subjected to a critical strain, goes directly from elastic to completely fractured regimes. This process occurs with no plasticity stages between these two regimes. Importantly, graphene presents a similar fracture process. The elastic properties calculated with both DFT and MD are in good agreement. Keywords: Reactive Molecular Dynamics, DFT, Mechanical Properties, Carbon Allotrope,
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Fully Atomistic Molecular Dynamics Simulations of Elastic Properties of Tetragraphene Monolayer
Authors:
Wjefferson H. S. Brandão,
Acrisio L. Aguiar,
Alexandre F. Fonseca,
D. S. Galvão,
J. M. De Sousa
Abstract:
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under differe…
▽ More
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under different temperatures is still lacking. In this work, using fully atomistic reactive molecular dynamics (MD) simulations, we investigate the mechanical properties of monolayer tetragraphene under tensile strain from the linear regime up to the complete structural failure (fracture). Different temperatures were considered and the results were compared to that of two other known planar carbon allotropes: graphene and penta-graphene. One interesting result is that tetragraphene experiences a transition from crystalline to an amorphous structure by either temperature or tension application. At room temperature, the critical strains along the two orthogonal unit-cell directions of tetragraphene are 38\% and 30\%, which is higher than that for graphene and penta-graphene. Tetragraphene Young's modulus values along its directions are from three to six times smaller than that of graphene and about 57\% that of penta-graphene at room temperature. Ultimate tensile strength values along the two directions of tetragraphene were obtained and also shown to be smaller than that of graphene and penta-graphene.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Atomistic Computational Modeling of Temperature Effects in Fracture Toughness and Degradation of Penta-graphene Monolayer
Authors:
W. H. S. Brandão,
A. L. Aguiar,
J. M. De Sousa
Abstract:
The novel carbon allotrope with particular and unique 2D arrangement of carbon atoms similar to a Cairo pentagonal tiling, with interplay of $sp^{3}$ and $sp^{2}$ hybridized carbon atoms is called of Penta-graphene (PG). Previous theoretical investigations have shown that PG monolayer is mechanically and thermodynamically stable, possessing also a large band gap of $3.25eV$. This new carbon allotr…
▽ More
The novel carbon allotrope with particular and unique 2D arrangement of carbon atoms similar to a Cairo pentagonal tiling, with interplay of $sp^{3}$ and $sp^{2}$ hybridized carbon atoms is called of Penta-graphene (PG). Previous theoretical investigations have shown that PG monolayer is mechanically and thermodynamically stable, possessing also a large band gap of $3.25eV$. This new carbon allotrope with unique carbon atom arrangement in a network (non-coplanar pentagons) is the focus of the theoretical investigations in this work. Using the non-equilibrium molecular dynamics simulations with reactive modern force field ReaxFF, we performed computational modeling of the nanostructural, dynamics e mechanical properties of penta-graphene monolayer under high temperature conditions. We obtained in our results the effect of the temperature in mechanical properties of penta-graphene monolayer up to $2000K$, where our results show that strain rate was strong effect on the mechanical properties with reduction of the $67$\%, reduction in the Ultimate Tensile Streght (UTS) $ 35.88 - 11.83GPa.nm $ and Young's Modulus ($Y_{Mod}$) of the $ 227.15 - 154.76GPa.nm $.
In this work we also calculated the reactive degradation of monolayer of penta-graphene at temperatures changes of $10K$ up to $2000K$. Thus, our averages show that penta-graphene monolayer loss atomic configurations with temperature effect up to $600K$, where the monolayer show nanostructural transition with several islands of graphene, large regions of porosity, small 1D carbon chains, and also negative curved layer.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
On the Mechanical Properties of Popgraphene-based Nanotubes: a Reactive Molecular Dynamics Study
Authors:
W. H. S. Brandão,
A. L. Aguiar,
L. A. Ribeiro,
D. S. Galvão,
J. M. De Sousa
Abstract:
Carbon-based tubular materials have sparked a great interest for future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of $5-8-5$ rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different ch…
▽ More
Carbon-based tubular materials have sparked a great interest for future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of $5-8-5$ rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different chiralities ($(n,0)$ and $(0,n)$) and/or diameters and at different temperatures (from 300 up to 1200K). Results showed that the tubes are thermally stable (at least up to 1200K). All tubes presented stress/strain curves with a quasi-linear behavior followed by an abrupt drop of stress values. Interestingly, armchair-like PopNTs ($(0,n)$) can stand a higher strain load before fracturing when contrasted to the zigzag-like ones ($(n,0)$). Moreover, it was obtained that the Young's modulus ($Y_{Mod}$) (750-900 GPa) and ultimate strength ($σ_{US}$) (120-150 GPa) values are similar to the ones reported for conventional armchair and zigzag carbon nanotubes. $Y_{Mod}$ values obtained for PopNTs are not significantly temperature dependent. While the $σ_{US}$ values for the $(0,n)$ showed a quasi-linear dependence with the temperature, the $(n,0)$ exhibited no clear trends.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
On the Elastic Properties of Single-Walled Phagraphene Nanotubes
Authors:
M. L. Pereira Junior,
J. M. De Sousa,
W. H. S. Brandão,
A. L. Aguiar,
R. A. Bizão,
L. A. Ribeiro Junior,
D. S. Galvão
Abstract:
Phagraphene (PhaG) is a quasi-planar 2D structure composed of $5-6-7$ ring sequence. We have investigated the structural and mechanical properties of phagraphene nanotubes (PhaNTs) through fully atomistic reactive molecular dynamics (MD) simulations. For comparison purposes, the results were also contrasted to similar carbon nanotubes (CNTs). Results showed that PhaNTs and CNTs present similar bri…
▽ More
Phagraphene (PhaG) is a quasi-planar 2D structure composed of $5-6-7$ ring sequence. We have investigated the structural and mechanical properties of phagraphene nanotubes (PhaNTs) through fully atomistic reactive molecular dynamics (MD) simulations. For comparison purposes, the results were also contrasted to similar carbon nanotubes (CNTs). Results showed that PhaNTs and CNTs present similar brittle fracture mechanisms. The Young's modulus values obtained for PhaNTs were smaller than the corresponding ones for CNTs. Both, PhaNTs and CNTs, present equivalent fracture strains ranging between 15\%-20\%. For the ultimate strength values, CNTs present values about 30\% higher than the corresponding ones for PhaNTs.
△ Less
Submitted 30 September, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Temperature Effects on the Fracture Dynamics and Elastic Properties of Popgraphene Membranes
Authors:
Marcelo L. Pereira Júnior,
Luiz A. Ribeiro Júnior,
Wjefferson H. S. Brandão,
Acrisio L. Aguiar,
Douglas S. Galvão,
José M. De Sousa
Abstract:
Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of $5-8-5$ carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG p…
▽ More
Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of $5-8-5$ carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG presents very distinct fracture mechanisms depending on the temperature and direction of the applied stretching. The main fracture dynamics trends are temperature independent and exhibit an abrupt rupture followed by fast crack propagation. The reason for this anisotropy is due to the fact that y-direction stretching leads to a deformation in the shape of the rings that cause the breaking of bonds in the pentagon-octagon and pentagon-pentagon ring connections, which is not observed for the x-direction. PopG is less stiff than graphene membranes, but the Young's modulus value is only 15% smaller.
△ Less
Submitted 30 September, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
