-
Efficient Superconductor Arithmetic Logic Unit for Ultra-Fast Computing
Authors:
Sasan Razmkhah,
Ali Bozbey
Abstract:
We present a 4-bit Arithmetic Logic Unit (ALU) utilizing superconductor technology. The ALU serves as the central processing unit of a processor, performing crucial arithmetic and logical operations. We have adopted a bit-parallel architecture to ensure an efficient and streamlined design with minimal fanin/fanout and optimal latency. In terms of fabrication, the ALU has been fabricated using a st…
▽ More
We present a 4-bit Arithmetic Logic Unit (ALU) utilizing superconductor technology. The ALU serves as the central processing unit of a processor, performing crucial arithmetic and logical operations. We have adopted a bit-parallel architecture to ensure an efficient and streamlined design with minimal fanin/fanout and optimal latency. In terms of fabrication, the ALU has been fabricated using a standard commercial process. It operates at an impressive clock frequency exceeding 30 GHz while consuming a mere 4.75 mW of power, including applied reverse current, encompassing static and dynamic components. The ALU contains over 9000 Josephson junctions, with approximately 7000 JJs dedicated to wiring, delay lines, and path balancing, and it has over 18% bias margin. Designed as a co-processor, this arithmetic logic unit will work with external CMOS memory and processors via interface circuits. Thorough testing and validation of the ALU's functionality have been conducted with digital and analog simulations, and all the components were fabricated and measured within a 4K pulse-tube cryocooler. Experimental verification has confirmed the successful operation of both the arithmetic and logic units. These results have been analyzed and are presented alongside the experimental data to provide comprehensive insights into the ALU's behavior and capabilities.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Hybrid Synaptic Structure for Spiking Neural Network Realization
Authors:
Sasan Razmkhah,
Mustafa Altay Karamuftuoglu,
Ali Bozbey
Abstract:
Neural networks and neuromorphic computing play pivotal roles in deep learning and machine vision. Due to their dissipative nature and inherent limitations, traditional semiconductor-based circuits face challenges in realizing ultra-fast and low-power neural networks. However, the spiking behavior characteristic of single flux quantum (SFQ) circuits positions them as promising candidates for spiki…
▽ More
Neural networks and neuromorphic computing play pivotal roles in deep learning and machine vision. Due to their dissipative nature and inherent limitations, traditional semiconductor-based circuits face challenges in realizing ultra-fast and low-power neural networks. However, the spiking behavior characteristic of single flux quantum (SFQ) circuits positions them as promising candidates for spiking neural networks (SNNs). Our previous work showcased a JJ-Soma design capable of operating at tens of gigahertz while consuming only a fraction of the power compared to traditional circuits, as documented in [1]. This paper introduces a compact SFQ-based synapse design that applies positive and negative weighted inputs to the JJ-Soma. Using an RSFQ synapse empowers us to replicate the functionality of a biological neuron, a crucial step in realizing a complete SNN. The JJ-Synapse can operate at ultra-high frequencies, exhibits orders of magnitude lower power consumption than CMOS counterparts, and can be conveniently fabricated using commercial Nb processes. Furthermore, the network's flexibility enables modifications by incorporating cryo-CMOS circuits for weight value adjustments. In our endeavor, we have successfully designed, fabricated, and partially tested the JJ-Synapse within our cryocooler system. Integration with the JJ-Soma further facilitates the realization of a high-speed inference SNN.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Superconductor modulation circuits for Qubit control at microwave frequencies
Authors:
Sasan Razmkhah,
Ali Bozbey,
Pascal Febvre
Abstract:
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach u…
▽ More
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.
△ Less
Submitted 27 September, 2023; v1 submitted 12 November, 2022;
originally announced November 2022.
-
A Compact High Frequency Voltage Amplifier for Superconductor-Semiconductor Logic Interface
Authors:
Sasan Razmkhah,
Ali Bozbey,
Pascal Febvre
Abstract:
The many advantages of cryogenically-cooled Single-Flux Quantum (SFQ) circuits imply that the high speed and low voltage output signals must be amplified and interfaced with standard electronics. State-of-the-art low-noise and wide-band amplifiers are required to interface with room temperature electronics. One solution is to place preamplifiers at the cryogenic stage, which requires specific semi…
▽ More
The many advantages of cryogenically-cooled Single-Flux Quantum (SFQ) circuits imply that the high speed and low voltage output signals must be amplified and interfaced with standard electronics. State-of-the-art low-noise and wide-band amplifiers are required to interface with room temperature electronics. One solution is to place preamplifiers at the cryogenic stage, which requires specific semiconductor design and fabrication. However, a more viable and energy-efficient approach is to integrate the pulsed logic circuit output stages with on-chip superconductor preamplifiers. We designed, fabricated, and tested an on-chip compact voltage multiplier integrated with the output stage of SFQ circuits to increase the voltage amplitude of SFQ pulses. The circuit is designed with the same technology as the logic circuit hence its noise level is lower, and it works at higher frequencies compared to CMOS amplifiers and due to quantized nature of it there is no added noise. The fabricated circuit has a compact size of 160 um x 320um and provides about 10 dB gain with measured 600 uV output voltage at frequencies up to ~25 GHz in simulations. By stacking more levels, over 20 dB gain at circuit level is achievable as shown in simulations. Moreover the gain of the superconductor voltage amplifier is quantized and programmable.
△ Less
Submitted 5 March, 2021; v1 submitted 6 November, 2020;
originally announced November 2020.
-
Single Flux Quantum Based Ultrahigh Speed Spiking Neuromorphic Processor Architecture
Authors:
Ali Bozbey,
Mustafa Altay Karamuftuoglu,
Sasan Razmkhah,
Murat Ozbayoglu
Abstract:
Artificial neural networks inspired by brain operations can improve the possibilities of solving complex problems more efficiently. Today's computing hardware, on the other hand, is mainly based on von Neumann architecture and CMOS technology, which is inefficient at implementing neural networks. For the first time, we propose an ultrahigh speed, spiking neuromorphic processor architecture built u…
▽ More
Artificial neural networks inspired by brain operations can improve the possibilities of solving complex problems more efficiently. Today's computing hardware, on the other hand, is mainly based on von Neumann architecture and CMOS technology, which is inefficient at implementing neural networks. For the first time, we propose an ultrahigh speed, spiking neuromorphic processor architecture built upon single flux quantum (SFQ) based artificial neurons (JJ-Neuron). Proposed architecture has the potential to provide higher performance and power efficiency over the state of the art including CMOS, memristors and nanophotonics devices. JJ-Neuron has the ultrafast spiking capability, trainability with commodity design software even after fabrication and compatibility with commercial CMOS and SFQ foundry services. We experimentally demonstrate the soma part of the JJ-Neuron for various activation functions together with peripheral SFQ logic gates. Then, the neural network is trained for the IRIS dataset and we have shown 100% match with the results of the offline training with 1.2x${10}^{10}$ synaptic operations per second (SOPS) and 8.57x${10}^{11}$ SOPS/W performance and power efficiency, respectively. In addition, scalability for ${10}^{18}$ SOPS and ${10}^{17}$ SOPS/W is shown which is at least five orders of magnitude more efficient than the state of the art CMOS circuits and one order of magnitude more efficient than estimations of nanophotonics-based architectures.
△ Less
Submitted 6 July, 2020; v1 submitted 26 December, 2018;
originally announced December 2018.
-
Current Status of the SANAEM RFQ Accelerator Beamline
Authors:
G. Turemen,
B. Yasatekin,
S. Ogur,
V. Yildiz,
O. Mete,
S. Oz,
A. Ozbey,
H. Yildiz,
F. Yaman,
Y. Akgun,
A. Alacakir,
S. Bolukdemir,
A. Bozbey,
A. Sahin,
G. Unel,
S. Erhan
Abstract:
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability…
▽ More
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability tests are ongoing for the Inductively Coupled Plasma ion source. The measured magnetic field maps of the Low Energy Beam Transport solenoids are being used for matching various beam configurations of the ion source to the RFQ by computer simulations. The installation of the low energy diagnostics box was completed in Q1 of 2015. The production of the RFQ cavity was started with aluminum 7075-T6 which will be subsequently coated by Copper to reduce the RF (Ohmic) losses. On the RF side, the development of the hybrid power supply based on solid state and tetrode amplifiers continues. All RF transmission components have already produced with the exception of the circulator and the power coupling antenna which are in the manufacturing and design phases, respectively. The acceptance tests of the produced RF components are ongoing. This work summarizes the design, production and test phases of the above-mentioned SPP proton beamline components.
△ Less
Submitted 30 September, 2015; v1 submitted 28 April, 2015;
originally announced April 2015.
