-
Extended Linearity in the High-Order Wavefront Sensor for the Roman Coronagraph
Authors:
Iva Laginja,
Pierre Baudoz,
Johan Mazoyer,
Axel Potier,
Raphaël Galicher,
Faouzi Boussaha
Abstract:
Context. The Coronagraphic Instrument (CGI) on the Roman Space Telescope aims for unprecedented contrast for direct imaging of exoplanets, serving as a critical tech demo for future missions like the Habitable Worlds Observatory. This requires advanced wavefront sensing and control (WFS&C), including pair-wise (PW) probing for electric field estimation in the focal plane. Optimizing PW probe desig…
▽ More
Context. The Coronagraphic Instrument (CGI) on the Roman Space Telescope aims for unprecedented contrast for direct imaging of exoplanets, serving as a critical tech demo for future missions like the Habitable Worlds Observatory. This requires advanced wavefront sensing and control (WFS&C), including pair-wise (PW) probing for electric field estimation in the focal plane. Optimizing PW probe designs is vital to enhance performance and reduce overheads.
Aims. We investigate different probe designs for PW probing in the context of Roman CGI. We compare classic sinc-sinc-sine probes, previously introduced single-actuator probes, and newly proposed sharp sinc probes in terms of effectiveness in focal-plane modulation, resilience to non-linearities, and overall impact on convergence and contrast.
Methods. We conducted experiments on the THD2 testbed, configured to emulate Roman CGI with a custom Hybrid Lyot Coronagraph. We evaluated the three probe designs through WFS&C experiments using PW probing for estimation and electric field conjugation for wavefront correction. Simulations and hardware tests assessed contrast convergence and the impact of non-linear terms at varying probe amplitudes. We also explored low-flux scenarios to demonstrate the use of high-amplitude probes in reducing exposure times or closing the loop on faint targets.
Results. Single-actuator probes emerged as the most effective, with faster convergence and reduced non-linear effects at high amplitudes. Sharp sinc probes performed moderately well but were less robust than single actuators. High-amplitude single-actuator probes showed advantages in dark-hole digging under low-flux, through faster iterations without significant degradation in contrast. The THD2 testbed, operating at contrasts analogous to Roman CGI, validated our results and underscored its role as a critical platform for advancing WFS&C techniques.
△ Less
Submitted 3 April, 2025; v1 submitted 1 April, 2025;
originally announced April 2025.
-
The MICADO first light imager for the ELT: Testing the Lyot coronograph prototypes
Authors:
Pierre Baudoz,
Elsa Huby,
Olivier Dupuis,
Faouzi Boussaha,
Yann Clénet,
Ric Davies
Abstract:
MICADO, the European Extremely Large Telescope first light imager will feature a dedicated high contrast imaging mode specifically designed for observing and characterizing exoplanets and circumstellar disks. Its improved sensitivity and angular resolution, compared to existing instruments will significantly increase our knowledge on these planetary systems. MICADO will include three classical Lyo…
▽ More
MICADO, the European Extremely Large Telescope first light imager will feature a dedicated high contrast imaging mode specifically designed for observing and characterizing exoplanets and circumstellar disks. Its improved sensitivity and angular resolution, compared to existing instruments will significantly increase our knowledge on these planetary systems. MICADO will include three classical Lyot coronagraphs, one vector phase-apodized pupil plane (vAPP) and two sparse apertures. After rapidly describing the final design of MICADO high contrast mode, we will describe the current state of development of the coronographic components and the testing of the first Lyot coronagraph prototypes.
△ Less
Submitted 20 November, 2024;
originally announced November 2024.
-
Investigation of reflection-based measurements of microwave kinetic inductance detectors in the optical bands
Authors:
Jie Hu,
Faouzi Boussaha,
Paul Nicaise,
Christine Chaumont,
Maria Appavou,
Viet Dung Pham,
Michel Piat
Abstract:
In this paper, we investigate the single photon response from the reflection of the Microwave Kinetic Inductance Detector (MKID) array. Reflection measurements are carried out using two configurations: one is measured simultaneously with the transmission, and the other is obtained with a single-ended MKID array terminated with an open load. Compared with the transmission, reflection measurements s…
▽ More
In this paper, we investigate the single photon response from the reflection of the Microwave Kinetic Inductance Detector (MKID) array. Reflection measurements are carried out using two configurations: one is measured simultaneously with the transmission, and the other is obtained with a single-ended MKID array terminated with an open load. Compared with the transmission, reflection measurements significantly reduce the readout noise of the single-ended MKID array. This is also reflected in the improvement of the median energy resolving power by around 20%-30% under pulsed photon illumination at $λ= 405$~nm, mainly due to an increase in the size of the resonance circle on the IQ plane. This method has the potential to be used to read out large MKID arrays.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Design and Simulation of TiN-Based Suspended Meander Kinetic Inductance Detectors (KIDs) for Visible and Near-Infrared Astronomy Applications
Authors:
Maria Appavou,
Lucas Ribeiro,
Paul Nicaise,
Jie Hu,
Jean-Marc Martin,
Josiane Firminy,
Christine Chaumont,
Piercarlo Bonifacio,
Faouzi Boussaha
Abstract:
We report on simulations of a novel design of optical titanium nitride (TiN)- based Kinetic Inductance Detectors (KIDs) in order to improve their response to optical photons. We propose to separate the meander from the substrate to trap hot phonons generated by optical photons, preventing their rapid propagation through the substrate. These phonons would in turn contribute to the breaking of more…
▽ More
We report on simulations of a novel design of optical titanium nitride (TiN)- based Kinetic Inductance Detectors (KIDs) in order to improve their response to optical photons. We propose to separate the meander from the substrate to trap hot phonons generated by optical photons, preventing their rapid propagation through the substrate. These phonons would in turn contribute to the breaking of more Cooper pairs, thereby increasing the response of the detector. In our design, the meander is suspended a few hundred nanometers above the substrate. Furthermore, reflective gold (Au) or aluminum (Al)-based layers can be placed under the meander to improve photon coupling in the optical wavelengths.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
Investigation of Quasi-particle Relaxation in Strongly Disordered Superconductor Resonators
Authors:
Jie Hu,
Jean-Marc Matin,
Paul Nicaise,
Faouzi Boussaha,
Christine Chaumont,
Michel Piat,
Pham Viet Dung,
Piercarlo Bonifacio
Abstract:
In this paper, we investigate the quasi-particle (QP) relaxation of strongly disordered superconducting resonators under optical illumination at different bath temperatures with the Rothwarf and Taylor equations and the gap-broadening theory described by the Usadal equation. The analysis is validated with various single-photon responses of Titanium Nitride (TiN) microwave kinetic inductance detect…
▽ More
In this paper, we investigate the quasi-particle (QP) relaxation of strongly disordered superconducting resonators under optical illumination at different bath temperatures with the Rothwarf and Taylor equations and the gap-broadening theory described by the Usadal equation. The analysis is validated with various single-photon responses of Titanium Nitride (TiN) microwave kinetic inductance detectors (MKIDs) under pulsed 405~nm laser illumination. The QP relaxation in TiN is dominated by QPs with energy below the energy gap smeared by the disorder, and its duration is still inversely proportional to the QP density. The QP lifetime versus temperature can be fitted. The relaxation of the resonator can be further modeled with QP diffusion. The fitted QP diffusion coefficient of TiN is significantly smaller than expected. Our result also shows a significant increase in QP generation efficiency as the bath temperature increases.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Development of MKIDs in the Optical and Near-infrared Bands for SPIAKID
Authors:
Jie Hu,
Paul Nicaise,
Faouzi Boussaha,
Jean-Marc Martin,
Christine Chaumont,
Alexine Marret,
Florent Reix,
Josiane Firminy,
Thibaut Vacelet,
Viet Dung Pham,
Michel Piat,
Elisabetta Caffau,
Piercarlo Bonifacio
Abstract:
SpectroPhotometric Imaging in Astronomy with Kinetic Inductance Detectors (SPIAKID) aims at designing, building, and deploying on the sky a spectrophotometric imager based on microwave kinetic inductance detectors (MKIDs) in the optical and near-infrared bands. MKIDs show a fast response and the ability to resolve photon energy compared to the conventional Charge-coupled Devices (CCDs). In this pa…
▽ More
SpectroPhotometric Imaging in Astronomy with Kinetic Inductance Detectors (SPIAKID) aims at designing, building, and deploying on the sky a spectrophotometric imager based on microwave kinetic inductance detectors (MKIDs) in the optical and near-infrared bands. MKIDs show a fast response and the ability to resolve photon energy compared to the conventional Charge-coupled Devices (CCDs). In this paper, we present the design and simulation of the MKID arrays for SPIAKID. The detectors consist of four arrays with each array of 20,000 lumped-element pixels, and each array will be read with 10 readout lines. %The array is designed to have resonances between 4-8GHz with a frequency spacing of 2 MHz and a coupling quality factor (Qc) of about 50000. The meander material of the resonators is trilayer TiN/Ti/TiN to have better uniformity of the critical temperature across the array. We also present the measurement result for a test array with $30\times30$ pixels which is a subset of the designed 2000-pixel array to verify the design and fabrication. The current measured best energy resolving power $R = E/ΔE$ is 2.4 at $λ= 405~$nm and the current medium R is around 1.7. We have also observed the response of the TiN/Ti/TiN is much smaller than expected.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
Investigation of Optical Coupling in Microwave Kinetic Inductance Detectors using Superconducting Reflective Plates
Authors:
Paul Nicaise,
Jie Hu,
Jean-Marc Martin,
Samir Beldi,
Christine Chaumont,
Piercarlo Bonifacio,
Michel Piat,
Hervé Geoffray,
Faouzi Boussaha
Abstract:
To improve the optical coupling in Microwave Kinetic Inductance Detectors (MKIDs), we investigate the use of a reflective plate beneath the meandered absorber. We designed, fabricated and characterized high-Q factors TiN-based MKIDs on sapphire operating at optical wavelengths with a Au/Nb reflective thin bilayer below the meander. The reflector is set at a quarter-wave distance from the meander u…
▽ More
To improve the optical coupling in Microwave Kinetic Inductance Detectors (MKIDs), we investigate the use of a reflective plate beneath the meandered absorber. We designed, fabricated and characterized high-Q factors TiN-based MKIDs on sapphire operating at optical wavelengths with a Au/Nb reflective thin bilayer below the meander. The reflector is set at a quarter-wave distance from the meander using a transparent Al$_2$O$_3$ dielectric layer to reach the peak photon absorption. We expect the plate to recover undetected photons by reflecting them back onto the absorber.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Large Inverse Transient Phase Response of Titanium-nitride-based Microwave Kinetic Inductance Detectors
Authors:
Jie Hu,
Faouzi Boussaha,
Jean-Marc Martin,
Paul Nicaise,
Christine Chaumont,
Samir Beldi,
Michel Piat,
Piercarlo Bonifacio
Abstract:
Following optical pulses ($λ=405~\text{nm}$) on titanium nitride (TiN) Microwave Kinetic Inductance Detectors (MKIDs) cooled down at temperatures $T \le T_c / 20$ ($T_c \simeq 4.6~\text{K}$), we observe a large phase-response highlighting two different modes simultaneously that are nevertheless related. The first corresponds to the well-known transition of cooper-pair breaking into quasi-particles…
▽ More
Following optical pulses ($λ=405~\text{nm}$) on titanium nitride (TiN) Microwave Kinetic Inductance Detectors (MKIDs) cooled down at temperatures $T \le T_c / 20$ ($T_c \simeq 4.6~\text{K}$), we observe a large phase-response highlighting two different modes simultaneously that are nevertheless related. The first corresponds to the well-known transition of cooper-pair breaking into quasi-particles which produces a known phase response. This is immediately followed by a large inverse response lasting several hundreds of microseconds to several milliseconds depending on the temperature. We propose to model this inverse pulse as the thermal perturbation of the superconductor and interaction with two level system (TLS) that reduces the dielectric constant which in turns modify the capacitance and therefore the resonance frequency. The ratio of the TLS responding to the illumination is on the order of that of the area of the inductor to the whole resonator
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
Design of Near Infrared and Visible Kinetic Inductance Detectors Using MIM Capacitors
Authors:
S. Beldi,
F. Boussaha,
C. Chaumont,
S. Mignot,
F. Reix,
A. Tartari,
T. Vacelet,
A. Traini,
M. Piat,
P. Bonifacio
Abstract:
We are developing superconducting Microwave Kinetic Inductance Detectors to operate at near infrared and optical wavelengths for astronomy. In order to efficiently meet with the requirements of astronomical applications, we propose to replace the interdigitated capacitor by a metal, insulator, metal capacitor which has the advantage of presenting a larger capacitance value within a much smaller sp…
▽ More
We are developing superconducting Microwave Kinetic Inductance Detectors to operate at near infrared and optical wavelengths for astronomy. In order to efficiently meet with the requirements of astronomical applications, we propose to replace the interdigitated capacitor by a metal, insulator, metal capacitor which has the advantage of presenting a larger capacitance value within a much smaller space. The pixel will occupy a space of typically 100 micrometers by 85 micrometers which is nine times less than a typical pixel size using the interdigitated capacitor operating at the same frequency, below 2 GHz.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Statics of non uniform Josephson junction parallel arrays: model vs. experiment
Authors:
F. Boussaha,
J. G. Caputo,
L. Loukitch,
M. Salez
Abstract:
We study experimentally and numerically the zero-voltage supercurrent vs. magnetic field of non-uniform arrays of Josephson junctions parallel-connected by a superconducting stripline. The measured curves are complex, unique and in excellent agreement with numerical simulations using a specially developed model. Using this, we can optimize the arrays to have any desired interference pattern. Suc…
▽ More
We study experimentally and numerically the zero-voltage supercurrent vs. magnetic field of non-uniform arrays of Josephson junctions parallel-connected by a superconducting stripline. The measured curves are complex, unique and in excellent agreement with numerical simulations using a specially developed model. Using this, we can optimize the arrays to have any desired interference pattern. Such new devices could find applications in magnetometry, quasiparticle mixers and detectors, flux-flow oscillators and superconducting electronics.
△ Less
Submitted 29 September, 2006;
originally announced September 2006.
