Showing 1–50 of 52 results for author: Boulogne, F

Reducing Foam Friction with Self Slippery Liquid-Infused Porous Surfaces

Authors: Alexis Commereuc, Emmanuelle Rio, François Boulogne

Abstract: Acquiring a comprehensive understanding of the interplay between foam friction and surface roughness is essential for achieving precise control over their flow dynamics. In particular, a major challenge is to reduce friction, which can be achieved with rough surfaces in the situation where a liquid infuses the asperities. In this study, we propose to explore self-infused surfaces. We first present… ▽ More Acquiring a comprehensive understanding of the interplay between foam friction and surface roughness is essential for achieving precise control over their flow dynamics. In particular, a major challenge is to reduce friction, which can be achieved with rough surfaces in the situation where a liquid infuses the asperities. In this study, we propose to explore self-infused surfaces. We first present simple observations to demonstrate the effectiveness of our surface design by recording the motion of a foam puddle on a smooth surface and a self-SLIPS. To quantify friction reduction, we conduct stress measurements on surfaces moved at a constant velocity. Finally, we interpret the variation of the friction force with the velocity by a model considering an effective slip length of the surface. This research paves the way for a novel approach to mitigate dissipation in liquid foam flows, holding significant implications for reducing energy consumption in conveying foams for industrial processes and various end-use applications. △ Less

Submitted 18 December, 2024; originally announced December 2024.

Thermal effects on the lifetime of evaporating drops on fibers

Authors: Marie Corpart, Frédéric Restagno, François Boulogne

Abstract: We present an experimental study on the evaporation of drops on fibers. More specifically, we focus on the droplet lifetime both in quiescent air and in an air flow of constant velocity. We propose a model to describe the evaporation rate and lifetime in a purely diffusive regime, which includes the liquid cooling associated with evaporation and the thermal conductivity of the atmosphere and the f… ▽ More We present an experimental study on the evaporation of drops on fibers. More specifically, we focus on the droplet lifetime both in quiescent air and in an air flow of constant velocity. We propose a model to describe the evaporation rate and lifetime in a purely diffusive regime, which includes the liquid cooling associated with evaporation and the thermal conductivity of the atmosphere and the fiber. Our model effectively captures the primary physical behaviors, demonstrating a semi-quantiative agreement with our measurements across various liquids and fiber materials. Finally, the model is generalized to a convective air flow, which also rationalizes our experimental data. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Journal ref: Soft Matter, 2024, 20, 9622 - 9630

Self-assembly and non-equilibrium phase coexistence in a binary granular mixture

Authors: A. Plati, R. Maire, F. Boulogne, F. Restagno, F. Smallenburg, G. Foffi

Abstract: We report the experimental observation of a square crystalline phase in a vibrated binary mixture of spherical grains. This structure spontaneously forms from a disordered state, consistently with predictions obtained in an equilibrium system with similar geometrical properties under conservative dynamics. By varying the area fraction, we also observe stable coexistence between a granular fluid an… ▽ More We report the experimental observation of a square crystalline phase in a vibrated binary mixture of spherical grains. This structure spontaneously forms from a disordered state, consistently with predictions obtained in an equilibrium system with similar geometrical properties under conservative dynamics. By varying the area fraction, we also observe stable coexistence between a granular fluid and an isolated square crystal. Using realistic simulations based on the discrete element method and an idealized collisional model integrated via event-driven molecular dynamics, we not only reproduce experimental results but also help to gain further insights into the non-equilibrium phase coexistence. Through the direct phase coexistence method, we demonstrate that the system shows behavior highly similar to an equilibrium first-order phase transition. However, the crystal remains at a higher granular temperature than the fluid, which is a striking non-equilibrium effect. Through qualitative argument and supported by kinetic theory, we elucidate the role of the coupling between local structure and energy transfer mechanisms in sustaining kinetic temperature gradients across the fluid-solid interface. △ Less

Submitted 28 October, 2024; originally announced October 2024.

Comments: 15 pages, 14 figures

Flat-cupped transition in freezing drop impacts

Authors: Marion Berry, Christophe Josserand, Anniina Salonen, François Boulogne

Abstract: We present an experimental study on the freezing of alkane drops impacted on a liquid bath. More specifically, for drops of hexadecane and tetradecane on brine, we found a morphological transition of the solid between a flat disk and a cupped shape. We show that this transition depends mainly on melting temperature and thermal shock, and varies weakly with impact velocity. We observed that the imp… ▽ More We present an experimental study on the freezing of alkane drops impacted on a liquid bath. More specifically, for drops of hexadecane and tetradecane on brine, we found a morphological transition of the solid between a flat disk and a cupped shape. We show that this transition depends mainly on melting temperature and thermal shock, and varies weakly with impact velocity. We observed that the impact dynamics does not depend on the thermal shock before the drop starts to solid ify, which allows a rationalization of the solid size by models established for impact without phase change. Finally, we show that the relevant timescale setting the onset of solidification is associated with the formation of a thin solid layer between the drop and the bath, a timescale much shorter than the total solidification time. These findings offer the possibility to collapse the data for both liquids in a single phase diagram. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Straight to zigzag transition of foam pseudo Plateau borders on textured surfaces

Authors: Alexis Commereuc, Sandrine Mariot, Emmanuelle Rio, François Boulogne

Abstract: The structure of liquid foams follows simple geometric rules formulated by Plateau 150 years ago. By placing such foam on a microtextured hydrophilic surface, we show that the bubble footprint exhibits a morphological transition. This transition concerns the liquid channels, also called pseudo Plateau borders, which are straight between vertices on a smooth surface. We demonstrate experimentally t… ▽ More The structure of liquid foams follows simple geometric rules formulated by Plateau 150 years ago. By placing such foam on a microtextured hydrophilic surface, we show that the bubble footprint exhibits a morphological transition. This transition concerns the liquid channels, also called pseudo Plateau borders, which are straight between vertices on a smooth surface. We demonstrate experimentally that for a sufficiently large roughness size compared to the width of the liquid channels, the footprint adopts a zigzag shape. This transition is associated with the absence of a wetting film between the pillars caused by capillary suction of the foam, observed by confocal microscopy. We rationalize the number of zigzag segments by a geometric distribution describing the observations made with the footprint perimeter and the mesh size of the asperities. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Lifetime of vertical giant soap films: role of the relative humidity and film dimensions

Authors: Marina Pasquet, François Boulogne, Frédéric Restagno, Emmanuelle Rio

Abstract: We consider the lifetime of rectangular vertical soap films and we explore the influence of relative humidity and both dimensions on the stability of large soap films, reaching heights of up to 1.2 m. Using an automated rupture detection system, we achieve a robust statistical measurement of their lifetimes and we also measure the film thinning dynamics. We demonstrate that drainage has a negligib… ▽ More We consider the lifetime of rectangular vertical soap films and we explore the influence of relative humidity and both dimensions on the stability of large soap films, reaching heights of up to 1.2 m. Using an automated rupture detection system, we achieve a robust statistical measurement of their lifetimes and we also measure the film thinning dynamics. We demonstrate that drainage has a negligible impact on the film stability as opposed to evaporation. To do so, we compare the measured lifetimes with predictions from the Boulogne \& Dollet model \cite{BoulogneDollet2018}, originally designed to describe the convective evaporation of hydrogels. Interestingly, we show that this model can predict a maximum film lifetime for all sizes. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Interface-templated crystal growth in sodium dodecyl sulfate solutions with NaCl

Authors: Anna Kharlamova, François Boulogne, Philippe Fontaine, Stéphan Rouzière, Arnaud Hemmerle, Michel Goldmann, Anniina Salonen

Abstract: Many ionic surfactants, such as sodium dodecyl sulphate (SDS) crystallize out of solution if the temperature falls below the crystallization boundary. The crystallization temperature is impacted by solution properties, and can be decreased with the addition of salt. We have studied SDS crystallization a t the liquid/vapor interfaces from solutions at high ionic strength (sodium chloride). We show… ▽ More Many ionic surfactants, such as sodium dodecyl sulphate (SDS) crystallize out of solution if the temperature falls below the crystallization boundary. The crystallization temperature is impacted by solution properties, and can be decreased with the addition of salt. We have studied SDS crystallization a t the liquid/vapor interfaces from solutions at high ionic strength (sodium chloride). We show that the surfactant crystals at the surface grow from adsorbed SDS molecules, as evidenced by the preferential orientation of the crystals identified using grazing incidence X-ray diffraction. We find a unique timescale f or the crystal growth from the evolution of structure, surface tension, and visual inspection, which can be controlled through varying the SDS or NaCl concentrations. △ Less

Submitted 10 November, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Evaporation-induced temperature gradient in a foam column

Authors: François Boulogne, Emmanuelle Rio, Frédéric Restagno

Abstract: Various parameters affect the foam stability: surface and bulk rheology of the solution, gravitational drainage, mechanical vibrations, bubble gas composition, and also evaporation. Evaporation is often considered through the prism of a liquid loss, but it also induces a cooling effect due to the enthalpy of vaporization. In this study, we combine a theoretical and experimental approach to explore… ▽ More Various parameters affect the foam stability: surface and bulk rheology of the solution, gravitational drainage, mechanical vibrations, bubble gas composition, and also evaporation. Evaporation is often considered through the prism of a liquid loss, but it also induces a cooling effect due to the enthalpy of vaporization. In this study, we combine a theoretical and experimental approach to explore the temperature field in a foam column evaporating from the top. We show that a measurable temperature profile exists in this geometry with temperatures at the interface lower than the environmental temperature by few degrees. We demonstrate that the temperature profile is the result of a balance between the enthalpy of vaporization and heat fluxes originating from the thermal conduction of foam and air and the thermal radiation. For small foam thicknesses compared to the radius, we found that the temperature gradient is established over the foam thickness while for large aspect ratios, the gradient is spanning over a lengthscale comparable to the tube radius. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Measuring relative humidity from evaporation with a wet-bulb thermometer: the psychrometer

Authors: Marie Corpart, Frédéric Restagno, François Boulogne

Abstract: Measuring the relative humidity of air is an important challenge for meteorological measurements, food conservation, building design, and evaporation control, among other applications. Relative humidity can be measured with a psychrometer, which is a hygrometer composed of two identical thermometers. The bulb of one thermometer is covered by a wick soaked with water so that evaporative cooling mak… ▽ More Measuring the relative humidity of air is an important challenge for meteorological measurements, food conservation, building design, and evaporation control, among other applications. Relative humidity can be measured with a psychrometer, which is a hygrometer composed of two identical thermometers. The bulb of one thermometer is covered by a wick soaked with water so that evaporative cooling makes it indicate a lower temperature than the dry-bulb thermometer; it is possible to determine the relative humidity from the difference between these readings. We describe both a model and an experimental setup to illustrate the principle of a psychrometer for a pedagogical laboratory. The science of psychrometry could be more broadly taught at the undergraduate level to help introduce students to aspects of measurement techniques, fluid mechanics, heat transfer, and non-equilibrium thermodynamics. △ Less

Submitted 19 September, 2023; v1 submitted 12 September, 2023; originally announced September 2023.

Quasi-crystalline order in vibrated granular matter

Authors: Andrea Plati, Raphael Maire, Etienne Fayen, Francois Boulogne, Frederic Restagno, Frank Smallenburg, Giuseppe Foffi

Abstract: Quasi-crystals are aperiodic structures that present crystallographic properties which are not compatible with that of a single unit cell. Their revolutionary discovery in a metallic alloy, less than three decades ago, has required a full reconsideration of what we defined as a crystal structure. Surprisingly, quasi-crystalline structures have been discovered also at much larger length scales in d… ▽ More Quasi-crystals are aperiodic structures that present crystallographic properties which are not compatible with that of a single unit cell. Their revolutionary discovery in a metallic alloy, less than three decades ago, has required a full reconsideration of what we defined as a crystal structure. Surprisingly, quasi-crystalline structures have been discovered also at much larger length scales in different microscopic systems for which the size of elementary building blocks ranges between the nanometric to the micrometric scale. Here, we report the first experimental observation of spontaneous quasi-crystal self-assembly at the millimetric scale. This result is obtained in a fully athermal system of macroscopic spherical grains vibrated on a substrate. Starting from a liquid-like disordered phase, the grains begin to locally arrange into three types of squared and triangular tiles that eventually align, forming 8-fold symmetric quasi-crystal that has been predicted in simulation but not yet observed experimentally in non-atomic systems. These results are not only the proof of a novel route to spontaneously assemble quasi-crystals but are of fundamental interest for the connection between equilibrium and non-equilibrium statistical physics. △ Less

Submitted 27 November, 2024; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: 4 Pages, 3 Figures

Journal ref: Nature Physics volume 20, 465-471 (2024)

Analytical prediction of the temperature and the lifetime of an evaporating spherical droplet

Authors: Marie Corpart, Frédéric Restagno, François Boulogne

Abstract: In this paper, we propose to predict analytically the temperature of an evaporating spherical droplet. To do so, we first review, from data in the literature, the effect of temperature on the physical parameters involved in cooling-induced evaporation, namely the saturating vapor pressure, the diffusion coefficient of vapor in air, the liquid density, the enthalpy of vaporization and the thermal c… ▽ More In this paper, we propose to predict analytically the temperature of an evaporating spherical droplet. To do so, we first review, from data in the literature, the effect of temperature on the physical parameters involved in cooling-induced evaporation, namely the saturating vapor pressure, the diffusion coefficient of vapor in air, the liquid density, the enthalpy of vaporization and the thermal conductivity of air. These data support a series of approximations that allows us to derive an implicit equation for the liquid temperature. We propose a quadratic approximation of the variation of the saturating vapor concentration with temperature to obtain an explicit prediction of the drop temperature. As a result, an analytical prediction of the droplet lifetime including the cooling effect is proposed. △ Less

Submitted 30 June, 2023; originally announced June 2023.

Dynamics of bubbles spontaneously entering in a tube

Authors: Alexis Commereuc, Manon Marchand, Emmanuelle Rio, François Boulogne

Abstract: When an open tube of small diameter touches a bubble of a larger diameter, the bubble spontaneously shrinks and pushes a soap film in the tube. We characterize the dynamics for different bubble sizes and number of soap films in the tube. We rationalize this observation from a mechanical force balance involving the Laplace pressure of the bubble and the viscous force from the advancing soap lamella… ▽ More When an open tube of small diameter touches a bubble of a larger diameter, the bubble spontaneously shrinks and pushes a soap film in the tube. We characterize the dynamics for different bubble sizes and number of soap films in the tube. We rationalize this observation from a mechanical force balance involving the Laplace pressure of the bubble and the viscous force from the advancing soap lamellae in the tube. We propose a numerical resolution of this model, and an analytical solution in an asymptotic regime. These predictions are then compared to the experiments. The emptying duration is primarily affected by the initial bubble to tube diameter ratio and by the number of soap films in the tube. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Coffee stain effect on a fibre from axisymmetric droplets

Authors: Marie Corpart, Frédéric Restagno, François Boulogne

Abstract: The so-called coffee stain effect has been intensively studied over the past decades, but most of the studies are focused on sessile droplets. In this paper, we analyse the origin of the difference between the deposition of suspended particles in a sessile drop and in an axisymmetric drop deposited on a fibre. First, we model the shape of a drop on a fibre and its evaporative flux with some approx… ▽ More The so-called coffee stain effect has been intensively studied over the past decades, but most of the studies are focused on sessile droplets. In this paper, we analyse the origin of the difference between the deposition of suspended particles in a sessile drop and in an axisymmetric drop deposited on a fibre. First, we model the shape of a drop on a fibre and its evaporative flux with some approximations to derive analytical calculations. Then, for pinned contact lines, we solve the hydrodynamics equations in the liquid phase under the lubrication approximation to determine the flow velocity toward the contact lines. We comment these results by comparison to a sessile drop of similar evaporating conditions, and we show that the substrate curvature plays a role on the contact line depinning, the local evaporative flux, and the liquid flow field. The competition between the advection and the Brownian motion indicates that the transport of the particles toward the contact line occurs in a volume localised in the close vicinity of the contact lines for a drop on a fibre. Thus, the fibre geometry induces a weaker accumulation of particles at the contact line compared to a sessile drop, leading to the more homogeneous deposit observed experimentally. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Measurement of the temperature decrease in evaporating soap films

Authors: François Boulogne, Frédéric Restagno, Emmanuelle Rio

Abstract: Recent advances have demonstrated that evaporation can play a significant role on soap film stability, which is a key concern in many industrial areas but also for children playing with bubbles. Thus, evaporation leads to a film thinning but also to a film cooling, which has been overlooked for soapy objects. Here, we study the temperature variation of an evaporating soap film for different values… ▽ More Recent advances have demonstrated that evaporation can play a significant role on soap film stability, which is a key concern in many industrial areas but also for children playing with bubbles. Thus, evaporation leads to a film thinning but also to a film cooling, which has been overlooked for soapy objects. Here, we study the temperature variation of an evaporating soap film for different values of relative humidity and glycerol concentrations. We evidence that the temperature of soap films can decrease after their creation up to 8$~^\text{o}$C. We propose a model describing the temperature drop of soap films after their formation that is in quantitative agreement with our experiments. We emphasize that this cooling effect is significant and must be carefully considered in future studies on the dynamics of soap films. △ Less

Submitted 14 December, 2022; originally announced December 2022.

Comments: 6 pages

Evaporation of liquid coating a fiber

Authors: Marie Corpart, Julien Dervaux, Christophe Poulard, Frédéric Restagno, François Boulogne

Abstract: We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux furthe… ▽ More We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux further localized at the edge as the aspect ratio increases. The evaporation of axisymmetric drops on a fiber is studied with numerical simulations. For sufficiently large volumes, we evidence that the evaporation rate is almost independent of the wetting properties of the liquid, even for small contact angles, and that the droplets evaporate as spheres of the same volume. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 8 pages + supplementary materials

Impact of physical-chemistry on the film thinning in surface bubbles

Authors: Marina Pasquet, François Boulogne, Julien Saint-Anna, Frédéric Restagno, Emmanuelle Rio

Abstract: In this paper, we investigate the thinning dynamics of evaporating surfactant-stabilised surface bubbles by considering the role of the physical-chemistry of solutions used in the liquid bath. We study the impact of the surfactant concentration below and above the cmc (critical micelle concentration) and the role of ambient humidity. First, in a humidity-saturated atmosphere, we show that if the i… ▽ More In this paper, we investigate the thinning dynamics of evaporating surfactant-stabilised surface bubbles by considering the role of the physical-chemistry of solutions used in the liquid bath. We study the impact of the surfactant concentration below and above the cmc (critical micelle concentration) and the role of ambient humidity. First, in a humidity-saturated atmosphere, we show that if the initial thickness depends on the surfactant concentration and is limited by the surface elasticity, the drainage dynamics are very well described from the capillary and gravity contributions. These dynamics are independent of the surfactant concentration. In a second part, our study reveals that the physical-chemistry impacts the thinning dynamics through evaporation. We include in the model the additional contribution due to evaporation, which shows a good description of the experimental data below the cmc. Above the cmc, although this model is unsatisfactory at short times, the dynamics at long times is correctly rendered and we establish that the increase of the surfactant concentration decreases the impact of evaporation. Finally, the addition of a hygroscopic compound, glycerol, can be also rationalized by our model. We demonstrate that glycerol decreases the bubble thinning rate at ambient humidity, thus increasing their stability. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: 7 pages, 5 figures. Submitted

Drop freezing: fine detection of contaminants by measuring the tip angle

Authors: François Boulogne, Anniina Salonen

Abstract: In this Letter, we show that the shape of a freezing drop of water can be sensitive to the presence of impurities. We measure the tip angle of water drops frozen on a cold plate. The fine changes in tip angle are robustly captured by our image analysis method, which shows a deviation from that of pure water in solutions with salt (NaCl), polymer (PEG) and surfactant (TTAB) starting at concentratio… ▽ More In this Letter, we show that the shape of a freezing drop of water can be sensitive to the presence of impurities. We measure the tip angle of water drops frozen on a cold plate. The fine changes in tip angle are robustly captured by our image analysis method, which shows a deviation from that of pure water in solutions with salt (NaCl), polymer (PEG) and surfactant (TTAB) starting at concentrations of $10^{-6}$, $10^{-4}$ and $10^{-6}$ M respectively. The method could be adapted into a portable water purity tester, but the work also highlights the complexity of water freezing as it is influenced by trace concentrations of impurities. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Roughness-induced friction in liquid foams

Authors: Manon Marchand, Frédéric Restagno, Emmanuelle Rio, François Boulogne

Abstract: Complex liquids flow is known to be drastically affected by the roughness condition at the interfaces. We combined stresses measurements and observations of the flow during the motion of different rough surfaces in dry liquid foams. We visually show that three distinct friction regimes exists: slippage, stick-slip motion, and anchored soap films. Our stress measurements are validated for slippage… ▽ More Complex liquids flow is known to be drastically affected by the roughness condition at the interfaces. We combined stresses measurements and observations of the flow during the motion of different rough surfaces in dry liquid foams. We visually show that three distinct friction regimes exists: slippage, stick-slip motion, and anchored soap films. Our stress measurements are validated for slippage and anchored regimes based on existing models, and we propose a leverage rule to describe the stresses during the stick-slip regime. We find that the occurrence of the stick-slip or anchored regimes is controlled by the roughness factor, defined as the ratio between the size of the surface asperities and the radius of curvature of the Plateau borders. △ Less

Submitted 10 February, 2020; v1 submitted 23 January, 2020; originally announced January 2020.

Comments: 12 pages, Supplemental information included

Journal ref: Phys. Rev. Lett. 124, 118003 (2020)

Cheap and versatile humidity regulator for environmentally controlled experiments

Authors: F. Boulogne

Abstract: The control of environmental conditions is crucial in many experimental work across scientific domains. In this technical note, we present how to realize a cheap humidity regulator based on a PID controller driven by an Arduino microcontroller. We argue our choices on the components and we show that the presented designs can serve as a basis to the reader for the realization of humidity regulators… ▽ More The control of environmental conditions is crucial in many experimental work across scientific domains. In this technical note, we present how to realize a cheap humidity regulator based on a PID controller driven by an Arduino microcontroller. We argue our choices on the components and we show that the presented designs can serve as a basis to the reader for the realization of humidity regulators with specific requirements and experimental constraints. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 5 pages

Influence of evaporation on soap film rupture

Authors: Lorène Champougny, Robin Henaff, Frédéric Restagno, François Boulogne, Emmanuelle Rio

Abstract: Although soap films are prone to evaporate due to their large surface to volume ratio, the effect of evaporation on macroscopic film features has often been disregarded in the literature. In this work, we investigate experimentally the influence of environmental humidity on soap film stability. An original experiment allows to measure both the maximum length of a film pulled at constant velocity a… ▽ More Although soap films are prone to evaporate due to their large surface to volume ratio, the effect of evaporation on macroscopic film features has often been disregarded in the literature. In this work, we investigate experimentally the influence of environmental humidity on soap film stability. An original experiment allows to measure both the maximum length of a film pulled at constant velocity and its thinning dynamics in a controlled atmosphere for various values of the relative humidity $\RH$. At first order, the environmental humidity seems to have almost no impact on most of the film thinning dynamics. However, we find that the film length at rupture increases continuously with $\RH$. To rationalize our observations, we propose that the film bursting occurs when the thinning due to evaporation becomes comparable to the thinning due to liquid drainage. This rupture criterion turns out to be in reasonable agreement with an estimation of the evaporation rate in our experiment. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Convective evaporation of vertical films

Authors: François Boulogne, Benjamin Dollet

Abstract: Motivated by the evaporation of soap films, which has a significant effect on their lifetime, we performed an experimental study on the evaporation of vertical surfaces with model systems based on hydrogels. From the analogy between heat and mass transfer, we adopt a model describing the natural convection in the gas phase due to a density contrast between dry and saturated air. Our measurements s… ▽ More Motivated by the evaporation of soap films, which has a significant effect on their lifetime, we performed an experimental study on the evaporation of vertical surfaces with model systems based on hydrogels. From the analogy between heat and mass transfer, we adopt a model describing the natural convection in the gas phase due to a density contrast between dry and saturated air. Our measurements show a good agreement with this model, both in terms of scaling law with the Grashof number and in terms of order of magnitude. We discuss the corrections to take into account, notably the contribution of edge effects, which have a small but visible contribution when lateral and bottom surface areas are not negligible compared to the main evaporating surface area. △ Less

Submitted 6 February, 2018; v1 submitted 25 January, 2018; originally announced January 2018.

Journal ref: Soft Matter, 2018

Water-based peeling of thin hydrophobic films

Authors: Sepideh Khodaparast, François Boulogne, Christophe Poulard, Howard A. Stone

Abstract: Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered… ▽ More Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered to a substrate, into a bath of pure water allows complete removal of the hydrophobic coatings. Upon dipping, the air-water interface in the bath forms a contact line on the substrate, which exerts a capillary-induced peeling force at the edge of the hydrophobic thin film. We highlight that this capillary peeling process is more effective at lower velocities of the air-liquid interface and lower viscosities. Capillary peeling not only removes such thin films from the substrate but also transfers them flawlessly onto the air-water interface. △ Less

Submitted 1 September, 2017; originally announced September 2017.

Diffusiophoretic manipulation of particles in a drop deposited on a hydrogel

Authors: François Boulogne, Sangwoo Shin, Julien Dervaux, Laurent Limat, Howard A. Stone

Abstract: We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficu… ▽ More We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficult to achieve. We show that diffusiophoresis can cause the particles to move either toward or away from the liquid-air interface depending on the direction of the solute gradient and the surface charge of the particles. We measure the particle adsorption experimentally and rationalize the results with a one-dimensional numerical model. We show that diffusiophoretic motion is significant at the lengthscale of a drop deposited on a hydrogel, which suggests a simple method for the deposition of particles on hydrogels. △ Less

Submitted 20 June, 2017; originally announced June 2017.

Protocol to perform pressurized blister tests on thin elastic films

Authors: François Boulogne, Sepideh Khodaparast, Christophe Poulard, Howard A. Stone

Abstract: This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred… ▽ More This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred from donor substrates to an air-water interface, which is then used as a platform to locate them on a receiver substrate. We embed a microchannel at the back of the device to evacuate the air trapped in the opening, through which the pressure is applied. We quantify the height and the radius of the blister to estimate the adhesion energy using the available expressions correlating the normal force and the moment with the shape of the blister. The present blister test provided adhesion energy per unit area of $G = 18 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ for polystyrene on glass, which is in good agreement with the measurement of $G = 14 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ found in our independent cleavage test. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Natural convection above circular disks of evaporating liquids

Authors: Benjamin Dollet, François Boulogne

Abstract: We investigate theoretically and experimentally the evaporation of liquid disks in the presence of natural convection due to a density difference between the vapor and the surrounding gas. From the analogy between thermal convection above a heated disk and our system, we derive scaling laws to describe the evaporation rate. The local evaporation rate depends on the presence of a boundary layer in… ▽ More We investigate theoretically and experimentally the evaporation of liquid disks in the presence of natural convection due to a density difference between the vapor and the surrounding gas. From the analogy between thermal convection above a heated disk and our system, we derive scaling laws to describe the evaporation rate. The local evaporation rate depends on the presence of a boundary layer in the gas phase such that the total evaporation rate is given by a combination of different scaling contributions, which reflect the structure of the boundary layer. We compare our theoretical predictions to experiments performed with water in an environment controlled in humidity, which validate our approach. △ Less

Submitted 14 May, 2017; v1 submitted 11 April, 2017; originally announced April 2017.

Withdrawing a solid from a bath: how much liquid is coated?

Authors: Emmanuelle Rio, François Boulogne

Abstract: A solid withdrawn from a liquid bath entrains a film. In this review, after recalling the predictions and results for pure Newtonian liquids coated on simple solids, we analyze the deviations to this ideal case exploring successively three potential sources of complexity: the liquid-air interface, the bulk rheological properties of the liquid and the mechanical or chemical properties of the solid.… ▽ More A solid withdrawn from a liquid bath entrains a film. In this review, after recalling the predictions and results for pure Newtonian liquids coated on simple solids, we analyze the deviations to this ideal case exploring successively three potential sources of complexity: the liquid-air interface, the bulk rheological properties of the liquid and the mechanical or chemical properties of the solid. For these different complexities, we show that significant effects on the film thickness are observed experimentally and we summarize the theoretical analysis presented in the literature, which attempt to rationalize these measurements. △ Less

Submitted 31 January, 2017; v1 submitted 14 December, 2016; originally announced December 2016.

Journal ref: Advances in Colloid and Interface Science, Volume 247, 2017, Pages 100-114

Coffee-stain growth dynamics on dry and wet surfaces

Authors: François Boulogne, François Ingremeau, Howard A. Stone

Abstract: The drying of a drop containing particles often results in the accumulation of the particles at the contact line. In this work, we investigate the drying of an aqueous colloidal drop surrounded by a hydrogel that is also evaporating. We combine theoretical and experimental studies to understand how the surrounding vapor concentration affects the particle deposit during the constant radius evaporat… ▽ More The drying of a drop containing particles often results in the accumulation of the particles at the contact line. In this work, we investigate the drying of an aqueous colloidal drop surrounded by a hydrogel that is also evaporating. We combine theoretical and experimental studies to understand how the surrounding vapor concentration affects the particle deposit during the constant radius evaporation mode. In addition to the common case of evaporation on an otherwise dry surface, we show that in a configuration where liquid is evaporating from a flat surface around the drop, the singularity of the evaporative flux at the contact line is suppressed and the drop evaporation is homogeneous. For both conditions, we derive the velocity field and we establish the temporal evolution of the number of particles accumulated at the contact line. We predict the growth dynamics of the stain and the drying timescales. Thus, dry and wet conditions are compared with experimental results and we highlight that only the dynamics is modified by the evaporation conditions, not the final accumulation at the contact line. △ Less

Submitted 23 November, 2016; originally announced November 2016.

Drop morphologies on flexible fibers: influence of elastocapillary effects

Authors: Alban Sauret, Francois Boulogne, Katarzyna Somszor, Emilie Dressaire, Howard A. Stone

Abstract: Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liqu… ▽ More Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liquid on a pair of crossed flexible fibers, through a model situation. We characterize the liquid morphologies as we vary the volume of liquid, the angle between the fibers, and the length of the fibers. The drop morphologies previously reported for rigid crossed fibers, i.e., a drop, a column and a mixed morphology, are also observed on flexible crossed fibers with modified domains of existence. In addition, at small tilting angles between the fibers, a new behavior is observed: the fibers bend and collapse. Depending on the volume of liquid, a thin column with or without a drop is reported on the collapsed fibers. Our study suggests that the fiber flexibility adds a rich variety of behaviors that may be important for some applications. △ Less

Submitted 8 October, 2016; originally announced October 2016.

Effect of the polydispersity of a colloidal drop on the drying induced stress as measured by the buckling of a floating sheet

Authors: François Boulogne, Yong Lin Kong, Janine K. Nunes, Howard A. Stone

Abstract: We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decrease… ▽ More We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decreases the expected stress, which we interpret as the formation of lower hydrodynamic resistance paths in the porous material. As colloidal suspensions are usually polydisperse, we show for different average particle sizes that the stress is effectively dominated by the larger particles of the distribution and not by the average particle size. △ Less

Submitted 19 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. Lett. 116, 238001 (2016)

Tuning the receding contact angle on hydrogels by addition of particles

Authors: François Boulogne, François Ingremeau, Laurent Limat, Howard A. Stone

Abstract: Control of the swelling, chemical functionalization, and adhesivity of hydrogels are finding new applications in a wide range of material systems. We investigate experimentally the effect of adsorbed particles on hydrogels on the depinning of contact lines. In our experiments, a water drop containing polystyrene microspheres is deposited on a swelling hydrogel, which leads to the drop absorption a… ▽ More Control of the swelling, chemical functionalization, and adhesivity of hydrogels are finding new applications in a wide range of material systems. We investigate experimentally the effect of adsorbed particles on hydrogels on the depinning of contact lines. In our experiments, a water drop containing polystyrene microspheres is deposited on a swelling hydrogel, which leads to the drop absorption and particle deposition. Two regimes are observed: a decreasing drop height with a pinned contact line followed by a receding contact line. We show that increasing the particles concentration increases the duration of the first regime and significantly decreases the total absorption time. The adsorbed particles increase the pinning force at the contact line. Finally, we develop a method to measure the receding contact angle with the consideration of the hydrogel swelling. △ Less

Submitted 24 May, 2016; v1 submitted 17 May, 2016; originally announced May 2016.

Controlled uniform coating from the interplay of Marangoni flows and surface-adsorbed macromolecules

Authors: Hyoungsoo Kim, François Boulogne, Eujin Um, Ian Jacobi, Ernie Button, Howard A. Stone

Abstract: Surface coatings and patterning technologies are essential for various physicochemical applications. In this Letter, we describe key parameters to achieve uniform particle coatings from binary solutions: First, multiple sequential Marangoni flows, set by solute and surfactant simultaneously, prevent non-uniform particle distributions and continuously mix suspended materials during droplet evapor… ▽ More Surface coatings and patterning technologies are essential for various physicochemical applications. In this Letter, we describe key parameters to achieve uniform particle coatings from binary solutions: First, multiple sequential Marangoni flows, set by solute and surfactant simultaneously, prevent non-uniform particle distributions and continuously mix suspended materials during droplet evaporation. Second, we show the importance of particle-surface interactions that can be established by surface-adsorbed macromolecules. To achieve a uniform deposit in a binary mixture, a small concentration of surfactant and surface-adsorbed polymer (0.05 wt% each) is sufficient, which offers a new physicochemical avenue for control of coatings. △ Less

Submitted 22 March, 2016; v1 submitted 25 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. Lett. 116, 124501 (2016)

Solid Capillarity: When and How does Surface Tension Deform Soft Solids?

Authors: Bruno Andreotti, Oliver Baeumchen, Francois Boulogne, Karen E. Daniels, Eric R. Dufresne, Hugo Perrin, Thomas Salez, Jacco H. Snoeijer, Robert W. Style

Abstract: Soft solids differ from stiff solids in an important way: their surface stresses can drive large deformations. Based on a topical workshop held in the Lorentz Center in Leiden, this Opinion highlights some recent advances in the growing field of solid capillarity and poses key questions for its advancement. Soft solids differ from stiff solids in an important way: their surface stresses can drive large deformations. Based on a topical workshop held in the Lorentz Center in Leiden, this Opinion highlights some recent advances in the growing field of solid capillarity and poses key questions for its advancement. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: 5 pages, 1 figure

Journal ref: Soft Matter, 12 2993 (2016) [Opinion]

Homogeneous deposition of particles by absorption on hydrogels

Authors: François Boulogne, François Ingremeau, Julien Dervaux, Laurent Limat, Howard A. Stone

Abstract: When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while m… ▽ More When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while maintaining the drying process. However, substitution of evaporation by absorption into the substrate of the solvent has been investigated less. Here, we show that a droplet containing colloidal particles deposited on swelling hydrogels can lead to a nearly uniform coating. We report experiments and theory to explore the relation between the gel swelling, uniformity of deposition and the adsorption dynamics of the particles at the substrate. Our findings suggest that draining the solvent by absorption provides a robust route to homogeneous coatings. △ Less

Submitted 18 November, 2015; originally announced November 2015.

Deposition of quantum dots in a capillary tube

Authors: Yong Lin Kong, François Boulogne, Hyoungsoo Kim, Janine Nunes, Jie Feng, Howard A. Stone

Abstract: The ability to assemble nanomaterials, such as quantum dots, enables the creation of functional devices that present unique optical and electronic properties. For instance, light-emitting diodes with exceptional color purity can be printed via the evaporative-driven assembly of quantum dots. Nevertheless, current studies of the colloidal deposition of quantum dots have been limited to the surfaces… ▽ More The ability to assemble nanomaterials, such as quantum dots, enables the creation of functional devices that present unique optical and electronic properties. For instance, light-emitting diodes with exceptional color purity can be printed via the evaporative-driven assembly of quantum dots. Nevertheless, current studies of the colloidal deposition of quantum dots have been limited to the surfaces of a planar substrate. Here, we investigate the evaporation-driven assembly of quantum dots inside a confined cylindrical geometry. Specifically, we observe distinct deposition patterns, such as banding structures along the length of a capillary tube. Such coating behavior can be influenced by the evaporation speed as well as the concentration of quantum dots. Understanding the factors governing the coating process can provide a means to control the assembly of quantum dots inside a capillary tube, ultimately enabling the creation of novel photonic devices. △ Less

Submitted 18 November, 2015; originally announced November 2015.

Tunable transport of drops on a vibrating inclined fiber

Authors: Alison Bick, François Boulogne, Alban Sauret, Howard A. Stone

Abstract: Transport of liquid drops in fibrous media occurs in various engineering systems such as fog harvesting or cleaning of textiles. The ability to tune or to control liquid movement can increase the system efficiency and enable new engineering applications. In this Letter, we experimentally investigate how partially wetting drops on a single fiber can be manipulated by vibrating the fiber. We show th… ▽ More Transport of liquid drops in fibrous media occurs in various engineering systems such as fog harvesting or cleaning of textiles. The ability to tune or to control liquid movement can increase the system efficiency and enable new engineering applications. In this Letter, we experimentally investigate how partially wetting drops on a single fiber can be manipulated by vibrating the fiber. We show that a sliding motion along the fiber or a dripping of the drop can be triggered by standing waves. We identify the conditions on the drop volume, the fiber tilt angle and the amplitude and frequency of oscillations to observe these different behaviors. Finally, we experimentally illustrate that vibrations can be used to control the transport and the collection of water drops along a fiber using a combination of the sliding and dripping transitions. △ Less

Submitted 25 October, 2015; originally announced October 2015.

Drop impact on a flexible fiber

Authors: Emilie Dressaire, Alban Sauret, François Boulogne, Howard A. Stone

Abstract: When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understandin… ▽ More When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understanding of the capture process for soft substrates. Here, we study experimentally the dynamics of a single drop impacting on a thin flexible fiber. Our results demonstrate that the threshold capture velocity depends on the flexibility of fibers in a non-monotonic way. We conclude that tuning the mechanical properties of fibers can optimize the efficiency of droplet capture. △ Less

Submitted 6 October, 2015; originally announced October 2015.

Comments: Soft Matter (2015)

Wetting morphologies on randomly oriented fibers

Authors: Alban Sauret, François Boulogne, Beatrice Soh, Emilie Dressaire, Howard A. Stone

Abstract: We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Dep… ▽ More We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Depending on the volume of liquid, the spacing distance between fibers and the angle between the fibers, we highlight that the liquid can adopt three different equilibrium morphologies: (1) a column morphology in which the liquid spreads between the fibers, (2) a mixed morphology where a drop grows at one end of the column or (3) a single drop located at the node. We capture the different morphologies observed using an analytical model that predicts the equilibrium configuration of the liquid based on the geometry of the fibers and the volume of liquid. △ Less

Submitted 28 August, 2015; originally announced August 2015.

Journal ref: Eur. Phys. J. E (2015)

Wetting morphologies on an array of fibers of different radii

Authors: Alban Sauret, François Boulogne, David Cébron, Emilie Dressaire, Howard A. Stone

Abstract: We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the… ▽ More We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the polydispersity of the fibers. Using energy considerations, we analytically predict the critical inter-fiber distance corresponding to the transition between the column and the drop morphologies occurs. This distance depends both on the radii of the fibers and on the contact angle of the liquid. We perform experiments using a perfectly wetting liquid on two parallel nylon fibers: the results are in good agreement with our analytical model. The morphology of the capillary bridges between fibers of different radii is relevant to the modeling of large arrays of polydisperse fibers. △ Less

Submitted 22 April, 2015; v1 submitted 18 February, 2015; originally announced February 2015.

Mechanical tuning of the evaporation rate of liquid on crossed fibers

Authors: François Boulogne, Alban Sauret, Beatrice Soh, Emilie Dressaire, Howard A. Stone

Abstract: We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics.… ▽ More We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics. We find that the evaporation rate depends significantly on the liquid morphology and that the drying of liquid column is faster than the evaporation of the drop and the mixed morphology for a given liquid volume. Finally, we illustrate that shearing a network of fibers reduces the angle between them, changes the morphology towards the column state, and so enhances the drying rate of a volatile liquid deposited on it. △ Less

Submitted 11 March, 2015; v1 submitted 7 January, 2015; originally announced January 2015.

Journal ref: Langmuir, 2015

Damping of liquid sloshing by foams

Authors: Alban Sauret, François Boulogne, Jean Cappello, Emilie Dressaire, Howard A. Stone

Abstract: When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on slo… ▽ More When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the damping coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines. △ Less

Submitted 1 February, 2015; v1 submitted 24 November, 2014; originally announced November 2014.

Comments: 17 pages, accepted in Physics of Fluids

Damping of liquid sloshing by foams: from everyday observations to liquid transport

Authors: Jean Cappello, Alban Sauret, François Boulogne, Emilie Dressaire, Howard A. Stone

Abstract: We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport. We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport. △ Less

Submitted 8 November, 2014; originally announced November 2014.

Comments: Accepted for publication in Journal of Visualization

Self-crumpling elastomers: bending induced by the drying stimulus of a nanoparticle suspension

Authors: François Boulogne, Howard A. Stone

Abstract: We report an experimental study of the drying-induced peeling of a bilayer, consisting of an elastomeric disk coated with a suspension of nanoparticles. We show that although capillary forces associated with the scale of the droplet can not compete with the adhesion of the elastomer on a surface, nevertheless large tensile stresses develop in the coating, which results in a moment bending the bila… ▽ More We report an experimental study of the drying-induced peeling of a bilayer, consisting of an elastomeric disk coated with a suspension of nanoparticles. We show that although capillary forces associated with the scale of the droplet can not compete with the adhesion of the elastomer on a surface, nevertheless large tensile stresses develop in the coating, which results in a moment bending the bilayer. We attribute this stress to the nano-menisci in the pores of the colloidal material and we propose a model that describes successfully the early stage curvature of the bilayer. Thus, we show that the peeling can be conveniently controlled by the particle size and the coating thickness. △ Less

Submitted 24 September, 2014; originally announced September 2014.

Comments: 6 pages, 5 figures, 1 table, accepted in EPL

scikit-image: Image processing in Python

Authors: Stefan van der Walt, Johannes L. Schönberger, Juan Nunez-Iglesias, François Boulogne, Joshua D. Warner, Neil Yager, Emmanuelle Gouillart, Tony Yu, the scikit-image contributors

Abstract: scikit-image is an image processing library that implements algorithms and utilities for use in research, education and industry applications. It is released under the liberal "Modified BSD" open source license, provides a well-documented API in the Python programming language, and is developed by an active, international team of collaborators. In this paper we highlight the advantages of open sou… ▽ More scikit-image is an image processing library that implements algorithms and utilities for use in research, education and industry applications. It is released under the liberal "Modified BSD" open source license, provides a well-documented API in the Python programming language, and is developed by an active, international team of collaborators. In this paper we highlight the advantages of open source to achieve the goals of the scikit-image library, and we showcase several real-world image processing applications that use scikit-image. △ Less

Submitted 23 July, 2014; originally announced July 2014.

Comments: Distributed under Creative Commons CC-BY 4.0. Published in PeerJ

Surface patterns in drying films of silica colloidal dispersions

Authors: François Boulogne, Frédérique Giorgiutti-Dauphiné, Ludovic Pauchard

Abstract: We report an experimental study on the drying of silica colloidal dispersions. Here we focus on a surface instability occurring in a drying paste phase before crack formation which affects the final film quality. Observations at macroscopic and microscopic scales reveal the occurrence of the instability, and the morphology of the film surface. Furthermore, we show that the addition of adsorbing po… ▽ More We report an experimental study on the drying of silica colloidal dispersions. Here we focus on a surface instability occurring in a drying paste phase before crack formation which affects the final film quality. Observations at macroscopic and microscopic scales reveal the occurrence of the instability, and the morphology of the film surface. Furthermore, we show that the addition of adsorbing polymers on silica particles can be used to suppress the instability under particular conditions of molecular weight and concentration. We relate this suppression to the increase of the paste elastic modulus. △ Less

Submitted 18 October, 2014; v1 submitted 7 February, 2014; originally announced February 2014.

Comments: 8 pages, accepted in Soft Matter

Structural anisotropy of directionally dried colloids

Authors: François Boulogne, Ludovic Pauchard, Frédérique Giorgiutti-Dauphiné, Robert Botet, Ralf Schweins, Michael Sztucki, Joaquim Li, Bernard Cabane, Lucas Goehring

Abstract: Aqueous colloidal dispersions of silica particles become anisotropic when they are dried through evaporation. This anisotropy is generated by a uniaxial strain of the liquid dispersions as they are compressed by the flow of water toward a solidification front. Part of the strain produced by the compression is relaxed, and part of it is stored and transferred to the solid. This stored elastic strai… ▽ More Aqueous colloidal dispersions of silica particles become anisotropic when they are dried through evaporation. This anisotropy is generated by a uniaxial strain of the liquid dispersions as they are compressed by the flow of water toward a solidification front. Part of the strain produced by the compression is relaxed, and part of it is stored and transferred to the solid. This stored elastic strain has consequences for the properties of the solid, where it may facilitate the growth of shear bands, and generate birefringence. △ Less

Submitted 28 January, 2014; v1 submitted 4 September, 2013; originally announced September 2013.

Comments: 6 pages, 6 figures

Journal ref: EPL (Europhysics Letters) 105, 38005 (2014)

Suppression of the Rayleigh-Plateau instability on a vertical fibre coated with wormlike micelle solutions

Authors: François Boulogne, Marc-Antoine Fardin, Sandra Lerouge, Ludovic Pauchard, Frédérique Giorgiutti-Dauphiné

Abstract: We report on the Rayleigh-Plateau instability in films of giant micelles solutions coating a vertical fibre. We observe that the dynamics of thin films coating the fibre could be very different from the Newtonian or standard Non-Newtonian cases. By varying the concentration of the components of the solutions and depending on the film thickness, we show for the first time that the Rayleigh-Plateau… ▽ More We report on the Rayleigh-Plateau instability in films of giant micelles solutions coating a vertical fibre. We observe that the dynamics of thin films coating the fibre could be very different from the Newtonian or standard Non-Newtonian cases. By varying the concentration of the components of the solutions and depending on the film thickness, we show for the first time that the Rayleigh-Plateau instability can be stabilized using surfactant solutions. Using global rheology and optical visualisations, we show that the development of shear-induced structures is required to stabilize the micellar film along the fibre. Assuming that the viscoelastic properties of the shear-induced state can be described by a simple model, we suggest that, in addition to the presence of shear-induced structures, the latter must have an elastic modulus greater than a critical value evaluated from a linear stability analysis. Finally, our analysis provides a way of estimating the bulk elasticity of the shear-induced state. △ Less

Submitted 17 June, 2013; originally announced June 2013.

Comments: 14 pages, 9 figures. Accepted in Soft Matter

Annular cracks in thin films of nanoparticle suspensions drying on a fiber

Authors: François Boulogne, Ludovic Pauchard, Frédérique Giorgiutti-Dauphiné

Abstract: We report an experimental study of the crack pattern formed during the drying of a colloidal suspension. A horizontal fiber, which provides a one dimensional, boundary-free substrate, is coated by a film of micronic thickness. The geometry imposes a remarkable annular crack pattern and allowing precise measurements of the crack spacing over a short range of film thickness (between 2 and 10 $μ$m) w… ▽ More We report an experimental study of the crack pattern formed during the drying of a colloidal suspension. A horizontal fiber, which provides a one dimensional, boundary-free substrate, is coated by a film of micronic thickness. The geometry imposes a remarkable annular crack pattern and allowing precise measurements of the crack spacing over a short range of film thickness (between 2 and 10 $μ$m) which varies linearly with the film height. We compare our experimental data with a model proposed by Kitsunezaki which suggests that the variation of the crack spacing with the film thickness depends on the ratio between a critical stress at cracking and a critical stress for slipping on the substrate. By measuring the friction force of the colloidal gels on a hydrophobic surface through a cantilever technique, we can deduce the critical crack stress for these colloidal gels simply by measuring the crack spacing of the pattern. △ Less

Submitted 20 May, 2013; originally announced May 2013.

Comments: Accepted in EPL

How to reduce the crack density in drying colloidal material?

Authors: François Boulogne, Frédérique Giorgiutti-Dauphiné, Ludovic Pauchard

Abstract: The drying of a colloidal dispersion can result in a gel phase defined as a porous matrix saturated in solvent. During the drying process, high mechanical stresses are generated. When these stresses exceed the strength of the material, they can be released in the formation of cracks. This process strongly depends on both the mechanical properties of the material and the way the gel consolidates. I… ▽ More The drying of a colloidal dispersion can result in a gel phase defined as a porous matrix saturated in solvent. During the drying process, high mechanical stresses are generated. When these stresses exceed the strength of the material, they can be released in the formation of cracks. This process strongly depends on both the mechanical properties of the material and the way the gel consolidates. In this report, we give experimental evidences that the number of cracks formed in the consolidating film depend on the drying rate, the nature of the solvent and the mechanical properties of the colloidal particles. △ Less

Submitted 14 February, 2013; originally announced February 2013.

Comments: Accepted in Oil and Gas Science and technology

The buckling and invagination process during consolidation of colloidal droplets

Authors: François Boulogne, Frédérique Giorgiutti-Dauphiné, Ludovic Pauchard

Abstract: Drying a droplet of colloidal dispersion can result in complex pattern formation due to both development and deformation of a skin at the drop surface. The present study focus on the drying process of droplets of colloidal dispersions in a confined geometry where direct observations of the skin thickness are allowed. During the drying, a buckling process is followed by a single depression growth i… ▽ More Drying a droplet of colloidal dispersion can result in complex pattern formation due to both development and deformation of a skin at the drop surface. The present study focus on the drying process of droplets of colloidal dispersions in a confined geometry where direct observations of the skin thickness are allowed. During the drying, a buckling process is followed by a single depression growth inside the drop. The deformation of the droplet is found to be generic and is studied for various colloidal dispersions. The final shape can be partly explained by simple energy analysis based on the competition between bending and stretching deformations. Particularly, the final shape enables us to determine precisely the critical thickness of the shell for buckling. This study allow us to validate theory in 2D droplets and apply it to the case of 3D droplets where the thickness is not accessible by direct observation. △ Less

Submitted 7 November, 2012; originally announced November 2012.

Comments: 17 pages. Accepted in Soft Matter

Effect of a non-volatile cosolvent on crack pattern induced by desiccation of a colloidal gel

Authors: François Boulogne, Ludovic Pauchard, Frédérique Giorgiutti-Dauphiné

Abstract: Consolidation of colloidal gels results in enormous stresses that are usually released in the formation of undesirable cracks. The capacity of a gel network to crack during drying depends on the existence and significance of a pressure gradient in the pore liquid; in addition it depends on the way the gel relaxes the resulting drying stresses. In this paper the effect of a binary mixture of solven… ▽ More Consolidation of colloidal gels results in enormous stresses that are usually released in the formation of undesirable cracks. The capacity of a gel network to crack during drying depends on the existence and significance of a pressure gradient in the pore liquid; in addition it depends on the way the gel relaxes the resulting drying stresses. In this paper the effect of a binary mixture of solvents saturating the gel network on the crack patterns formation is investigated. Indeed, incorporation of a small quantity of non-volatile cosolvent, i.e. glycerol, inhibits drying-induced cracks; moreover addition of a concentration greater than 10% to a colloidal dispersion leads to a crack free coating in room conditions. Mass variation with time reveals that both evaporation rate and cracking time are not affected by glycerol, in the range of added glycerol contents studied. In addition measurements of mechanical properties show that the elastic modulus is reduced with glycerol content. The decrease of the number of cracks with the glycerol content is related to the flattening of the pressure gradient in the pore liquid. The mechanism is shown to be due to the combination of two processes: flow driven by the pressure gradient and diffusion mechanisms in accordance with Scherer work (1989). △ Less

Submitted 27 June, 2012; originally announced June 2012.

Comments: Accepted in Soft Matter