-
Transverse vortices induced by modulated granular shear flows of elongated particles
Authors:
Sára Lévay,
Philippe Claudin,
Ellák Somfai,
Tamás Börzsönyi
Abstract:
We have performed DEM simulations of elongated grains in a shear cell for various particle aspect ratios and contact frictions, with an additional heterogeneous force perturbation in the flow direction. For a perturbation in the form of a single Fourier mode, we show that the response of the system consists of transverse secondary flows that average onto a pattern of four vortices. We have also th…
▽ More
We have performed DEM simulations of elongated grains in a shear cell for various particle aspect ratios and contact frictions, with an additional heterogeneous force perturbation in the flow direction. For a perturbation in the form of a single Fourier mode, we show that the response of the system consists of transverse secondary flows that average onto a pattern of four vortices. We have also theoretically studied this phenomenon by generalizing the granular rheology $μ(I)$ to the case of elongated grains and computing the linear response to such a perturbation. Even if the agreement between theory and simulations remains qualitative only, we can reproduce and understand the inversion of the vortex pattern when the cell aspect ratio is increased from a vertically to a horizontally elongated cell shape, emphasizing the key role of the second normal stress difference as well as the cell geometry.
△ Less
Submitted 14 February, 2025;
originally announced February 2025.
-
Effect of particle shape on the flow of an hourglass
Authors:
Bo Fan,
Tivadar Pongó,
Raúl Cruz Hidalgo,
Tamás Börzsönyi
Abstract:
The flow rate of a granulate out of a cylindrical container is studied as a function of particle shape for flat and elongated ellipsoids experimentally and numerically. We find a nonmonotonic dependence of the flow rate on the grain aspect ratio a/b. Starting from spheres the flow rate grows and has two maxima around the aspect ratios of a/b = 0.6 (lentil-like ellipsoids) and a/b = 1.5 (rice-like…
▽ More
The flow rate of a granulate out of a cylindrical container is studied as a function of particle shape for flat and elongated ellipsoids experimentally and numerically. We find a nonmonotonic dependence of the flow rate on the grain aspect ratio a/b. Starting from spheres the flow rate grows and has two maxima around the aspect ratios of a/b = 0.6 (lentil-like ellipsoids) and a/b = 1.5 (rice-like ellipsoids) reaching a flow rate increase of about 15% for lentils compared to spheres. For even more anisometric shapes (a/b = 0.25 and a/b = 4) the flow rate drops. Our results reveal two contributing factors to the nonmonotonic nature of the flow rate: both the packing fraction and the particle velocity through the orifice are nonmonotonic functions of the grain shape. Thus, particles with slightly non-spherical shapes not only form a better packing in the silo but also move faster through the orifice than spheres. We also show that the resistance of the granulate against shearing increases with aspect ratio for both elongated and flat particles, thus change in the effective friction of the granulate due to changing particle shape does not coincide with the trend in the flow rate.
△ Less
Submitted 31 July, 2024;
originally announced July 2024.
-
Exploring noisy Jeffery orbits: A combined Fokker-Planck and Langevin analysis in 2D and 3D
Authors:
Julian Talbot,
Charles Antoine,
Philippe Claudin,
Ellák Somfai,
Tamás Börzsönyi
Abstract:
The behavior of non-spherical particles in a shear-flow is of significant practical and theoretical interest. These systems have been the object of numerous investigations since the pioneering work of Jeffery a century ago. His eponymous orbits describe the deterministic motion of an isolated, rod-like particle in a shear flow. Subsequently, the effect of adding noise was investigated. The theory…
▽ More
The behavior of non-spherical particles in a shear-flow is of significant practical and theoretical interest. These systems have been the object of numerous investigations since the pioneering work of Jeffery a century ago. His eponymous orbits describe the deterministic motion of an isolated, rod-like particle in a shear flow. Subsequently, the effect of adding noise was investigated. The theory has been applied to colloidal particles, macromolecules, anisometric granular particles and most recently to microswimmers, for example bacteria. We study the Jeffery orbits of elongated particles subject to noise using Langevin simulations and a Fokker-Planck equation. We extend the analytical solution for infinitely thin needles ($β=1$) obtained by Doi and Edwards to particles with arbitrary shape factor ($0\le β\le 1$) and validate the theory by comparing it with simulations. We examine the rotation of the particle around the vorticity axis and study the orientational order matrix. We use the latter to obtain scalar order parameters $s$ and $r$ describing nematic ordering and biaxiality from the orientational distribution function. The value of $s$ (nematic ordering) increases monotonically with increasing Péclet number, while $r$ (measure of biaxiality) displays a maximum value. From perturbation theory we obtain simple expressions that provide accurate descriptions at low noise (or large Péclet numbers). We also examine the orientational distribution in the v-grad v plane and in the perpendicular direction. Finally we present the solution of the Fokker-Planck equation for a strictly two-dimensional (2D) system. For the same noise amplitude the average rotation speed of the particle in 3D is larger than in 2D.
△ Less
Submitted 20 November, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Force on a sphere suspended in flowing granulate
Authors:
Jing Wang,
Bo Fan,
Tivadar Pongó,
Tamás Börzsönyi,
Raúl Cruz Hidalgo,
Ralf Stannarius
Abstract:
We investigate the force of flowing granular material on an obstacle. A sphere suspended in a discharging silo experiences both the weight of the overlaying layers and drag of the surrounding moving grains. In experiments with frictional hard glass beads, the force on the obstacle was practically flow-rate independent. In contrast, flow of nearly frictionless soft hydrogel spheres added drag to th…
▽ More
We investigate the force of flowing granular material on an obstacle. A sphere suspended in a discharging silo experiences both the weight of the overlaying layers and drag of the surrounding moving grains. In experiments with frictional hard glass beads, the force on the obstacle was practically flow-rate independent. In contrast, flow of nearly frictionless soft hydrogel spheres added drag to the gravitational force. The dependence of the total force on the obstacle diameter is qualitatively different for the two types of material: It grows quadratically with the obstacle diameter in the soft, low friction material, while it grows much weaker, nearly linearly with the obstacle diameter, in the bed of glass spheres. In addition to the drag, the obstacle embedded in flowing low-friction soft particles experiences a total force from the top as if immersed in a hydrostatic pressure profile, but a much lower counterforce acting from below. In contrast, when embedded in frictional, hard particles, a strong pressure gradient forms near the upper obstacle surface.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Flow of asymmetric elongated particles
Authors:
Bo Fan,
Ellák Somfai,
Ralf Stannarius,
Tamás Börzsönyi
Abstract:
Shear induced orientational ordering of asymmetric elongated particles is investigated experimentally. Corn grains and pegs with one end sharpened are studied using X-ray Computed Tomography (CT) during quasistatic shearing and silo discharge. We show that asymmetries can be detected in the orientational distributions of the particles, which are related to the modulated rotation of the particles d…
▽ More
Shear induced orientational ordering of asymmetric elongated particles is investigated experimentally. Corn grains and pegs with one end sharpened are studied using X-ray Computed Tomography (CT) during quasistatic shearing and silo discharge. We show that asymmetries can be detected in the orientational distributions of the particles, which are related to the modulated rotation of the particles during shear flow. Namely, when the particles rotate in a plane that is not horizontal, they spend more time with the sharper (lighter) end pointing up, which can be explained using energetic arguments. We quantify the resulting asymmetry of the orientational distribution in a split bottom Couette cell and in a silo discharge process.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Elongated particles discharged with a conveyor belt in a two-dimensional silo
Authors:
Bo Fan,
Iker Zuriguel,
Joshua A. Dijksman,
Jasper van der Gucht,
Tamás Börzsönyi
Abstract:
The flow of elliptical particles out of a 2-dimensional silo when extracted with a conveyor belt is analyzed experimentally. The conveyor belt - placed directly below the silo outlet - reduces the flow rate, increases the size of the stagnant zone, and it has a very strong influence on the relative velocity fluctuations as they strongly increase everywhere in the silo with decreasing belt speed. I…
▽ More
The flow of elliptical particles out of a 2-dimensional silo when extracted with a conveyor belt is analyzed experimentally. The conveyor belt - placed directly below the silo outlet - reduces the flow rate, increases the size of the stagnant zone, and it has a very strong influence on the relative velocity fluctuations as they strongly increase everywhere in the silo with decreasing belt speed. In other words, instead of slower but smooth flow, flow reduction by belt leads to intermittent flow. Interestingly, we show that this intermittency correlates with a strong reduction of the orientational order of the particles at the orifice region. Moreover, we observe that the average orientation of the grains passing through the outlet is modified when they are extracted with the belt, a feature that becomes more evident for large orifices.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Discharge of elongated grains in silos under rotational shear
Authors:
Tivadar Pongó,
Tamás Börzsönyi,
Raúl Cruz Hidalgo
Abstract:
The discharge of elongated particles from a silo with rotating bottom is investigated numerically. The introduction of a slight transverse shear reduces the flow rate $Q$ by up to 70% compared to stationary bottom, but the flow rate shows a modest increase by further increasing the external shear. Focusing on the dependency of flow rate $Q$ on orifice diameter $D$, the spheres and rods show two di…
▽ More
The discharge of elongated particles from a silo with rotating bottom is investigated numerically. The introduction of a slight transverse shear reduces the flow rate $Q$ by up to 70% compared to stationary bottom, but the flow rate shows a modest increase by further increasing the external shear. Focusing on the dependency of flow rate $Q$ on orifice diameter $D$, the spheres and rods show two distinct trends. For rods, in the small aperture limit $Q$ seems to follow an exponential trend, deviating from the classical power-law dependence. These macroscopic observations are in good agreement with our earlier experimental findings [Phys. Rev. E $\textbf{103}$, 062905 (2021)]. With the help of the coarse-graining methodology we obtain the spatial distribution of the macroscopic density, velocity, kinetic pressure, and orientation fields. This allows us detecting a transition from funnel to mass flow pattern, caused by the external shear. Additionally, averaging these fields in the region of the orifice reveals that the strong initial decrease in $Q$ is mostly attributed to changes in the flow velocity, while the weakly increasing trend at higher rotation rates is related to increasing packing fraction. Similar analysis of the grain orientation at the orifice suggests a correlation of the flow rate magnitude with the vertical orientation and the packing fraction at the orifice with the order of the grains. Lastly, the vertical profile of mean acceleration at the center of the silo denotes that the region where the acceleration is not negligible shrinks significantly due to the strong perturbation induced by the moving wall.
△ Less
Submitted 25 October, 2022;
originally announced October 2022.
-
Discharge of elongated grains from silo with rotating bottom
Authors:
Kiwing To,
Yi-Kai Mo,
Tivadar Pongó,
Tamás Börzsönyi
Abstract:
We study the flow of elongated grains (wooden pegs of length $L$=20 mm with circular cross section of diameter $d_c$=6 and 8 mm) from a silo with a rotating bottom and a circular orifice of diameter $D$. In the small orifice range ($D/d<5$) clogs are mostly broken by the rotating base, and the flow is intermittent with avalanches and temporary clogs. Here $d\equiv(\frac{3}{2}d_c^2L)^{1/3}$ is the…
▽ More
We study the flow of elongated grains (wooden pegs of length $L$=20 mm with circular cross section of diameter $d_c$=6 and 8 mm) from a silo with a rotating bottom and a circular orifice of diameter $D$. In the small orifice range ($D/d<5$) clogs are mostly broken by the rotating base, and the flow is intermittent with avalanches and temporary clogs. Here $d\equiv(\frac{3}{2}d_c^2L)^{1/3}$ is the effective grain diameter. Unlike for spherical grains, for rods the flow rate $W$ clearly deviates from the power law dependence $W\propto (D-kd)^{2.5}$ at lower orifice sizes in the intermittent regime, where $W$ is measured in between temporary clogs only. Instead, below about $D/d<3$ an exponential dependence $W\propto e^{κD}$ is detected. Here $k$ and $κ$ are constants of order unity. Even more importantly, rotating the silo base leads to a strong -- more than 50% -- decrease of the flow rate, which otherwise does not depend significantly on the value of $ω$ in the continuous flow regime. In the intermittent regime, $W(ω)$ appears to follow a non-monotonic trend, although with considerable noise. A simple picture, in terms of the switching from funnel flow to mass flow and the alignment of the pegs due to rotation, is proposed to explain the observed difference between spherical and elongated grains. We also observe shear induced orientational ordering of the pegs at the bottom such that their long axes in average are oriented at a small angle $\langleθ\rangle \approx 15^\circ$ to the motion of the bottom.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
Particle flow rate in silos under rotational shear
Authors:
D. Hernández-Delfin,
T. Pongó,
K. To,
T. Börzsönyi,
R. C. Hidalgo
Abstract:
Very recently, To et al.~have experimentally explored granular flow in a cylindrical silo, with a bottom wall that rotates horizontally with respect to the lateral wall \cite{Kiwing2019}. Here, we numerically reproduce their experimental findings, in particular, the peculiar behavior of the mass flow rate $Q$ as a function of the frequency of rotation $f$. Namely, we find that for small outlet dia…
▽ More
Very recently, To et al.~have experimentally explored granular flow in a cylindrical silo, with a bottom wall that rotates horizontally with respect to the lateral wall \cite{Kiwing2019}. Here, we numerically reproduce their experimental findings, in particular, the peculiar behavior of the mass flow rate $Q$ as a function of the frequency of rotation $f$. Namely, we find that for small outlet diameters $D$ the flow rate increased with $f$, while for larger $D$ a non-monotonic behavior is confirmed. Furthermore, using a coarse-graining technique, we compute the macroscopic density, momentum, and the stress tensor fields. These results show conclusively that changes in the discharge process are directly related to changes in the flow pattern from funnel flow to mass flow. Moreover, by decomposing the mass flux (linear momentum field) at the orifice into two main factors: macroscopic velocity and density fields, we obtain that the non-monotonic behavior of the linear momentum is caused by density changes rather than by changes in the macroscopic velocity. In addition, by analyzing the spatial distribution of the kinetic stress, we find that for small orifices increasing rotational shear enhances the mean kinetic pressure $\langle p^k \rangle$ and the system dilatancy. This reduces the stability of the arches, and, consequently, the volumetric flow rate increases monotonically. For large orifices, however, we detected that $\langle p^k \rangle$ changes non-monotonically, which might explain the non-monotonic behavior of $Q$ when varying the rotational shear.
△ Less
Submitted 29 April, 2021;
originally announced April 2021.
-
Flow in an hourglass: particle friction and stiffness matter
Authors:
Tivadar Pongó,
Viktória Stiga,
János Török,
Sára Lévay,
Balázs Szabó,
Ralf Stannarius,
Raúl Cruz Hidalgo,
Tamás Börzsönyi
Abstract:
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pr…
▽ More
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pressure of the order of 4 kPa lowering the friction coefficient leads to a gradual change in the discharge curve: the flow rate becomes filling height dependent, it decreases during the discharge process. For hard grains with a Young's modulus of about $Y_m\approx 500$ MPa the flow rate is much less sensitive to the value of the friction coefficient. Using DEM data combined with a coarse-graining methodology allows us to compute all the relevant macroscopic fields, namely, linear momentum, density and stress tensors. The observed difference in the discharge in the low friction limit is connected to a strong difference in the pressure field: while for hard grains Janssen-screening is effective, leading to high vertical stress near the silo wall and small pressure above the orifice region, for deformable grains the pressure above the orifice is larger and gradually decreases during the discharge process. We have analyzed the momentum balance in the region of the orifice (near the location of the outlet) for the case of soft particles with low friction coefficient, and proposed a phenomenological formulation that predicts the linear decrease of the flow rate with decreasing filling height.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Silo discharge of mixtures of soft and rigid grains
Authors:
Jing Wang,
Bo Fan,
Tivadar Pongó,
Kirsten Harth,
Torsten Trittel,
Ralf Stannarius,
Maja Illig,
Tamás Börzsönyi,
Raúl Cruz Hidalgo
Abstract:
We study the outflow dynamics and clogging phenomena of mixtures of soft, elastic low-friction spherical grains and hard frictional spheres of similar size in a quasi-two-dimensional (2D) silo with narrow orifice at the bottom. Previous work has demonstrated the crucial influence of elasticity and friction on silo discharge. We show that the addition of small amounts, even as low as 5\%, of hard g…
▽ More
We study the outflow dynamics and clogging phenomena of mixtures of soft, elastic low-friction spherical grains and hard frictional spheres of similar size in a quasi-two-dimensional (2D) silo with narrow orifice at the bottom. Previous work has demonstrated the crucial influence of elasticity and friction on silo discharge. We show that the addition of small amounts, even as low as 5\%, of hard grains to an ensemble of soft, low-friction grains already has significant consequences. The mixtures allow a direct comparison of the probabilities of the different types of particles to clog the orifice. We analyze these probabilities for the hard, frictional and the soft, slippery grains on the basis of their participation in the blocking arches, and compare outflow velocities and durations of non-permanent clogs for different compositions of the mixtures. Experimental results are compared with numerical simulations. The latter strongly suggest a significant influence of the inter-species particle friction.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Flow and rheology of frictional elongated grains
Authors:
Dániel B. Nagy,
Philippe Claudin,
Tamás Börzsönyi,
Ellák Somfai
Abstract:
The rheology of a 3-dimensional granular system consisting of frictional elongated particles was investigated by means of discrete element model (DEM) calculations. A homogenous shear flow of frictional spherocyliders was simulated, and a number of rheological quantities were calculated. In the framework of the $μ(I)$ rheology, the effective friction was found to be a non-monotonic function of the…
▽ More
The rheology of a 3-dimensional granular system consisting of frictional elongated particles was investigated by means of discrete element model (DEM) calculations. A homogenous shear flow of frictional spherocyliders was simulated, and a number of rheological quantities were calculated. In the framework of the $μ(I)$ rheology, the effective friction was found to be a non-monotonic function of the aspect ratio for interparticle friction coefficient $μ_p \lesssim 0.4$, while it was an increasing function for larger $μ_p$. We reveal the microscopic origin of this peculiar non-monotonic behavior. We show the non-trivial dependence of the velocity fluctuations on the dissipation regime, and trace back the behavior of the normal stress differences to particle-level quantities.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
Intermittent flow and transient congestions of soft spheres passing narrow orifices
Authors:
Kirsten Harth,
Jing Wang,
Tamás Börzsönyi,
Ralf Stannarius
Abstract:
Soft, low-friction particles in silos show peculiar features during their discharge. The outflow velocity and the clogging probability both depend upon the momentary silo fill height, in sharp contrast to silos filled with hard particles. The reason is the fill-height dependence of the pressure at the orifice. We study the statistics of silo discharge of soft hydrogel spheres. The outflow is found…
▽ More
Soft, low-friction particles in silos show peculiar features during their discharge. The outflow velocity and the clogging probability both depend upon the momentary silo fill height, in sharp contrast to silos filled with hard particles. The reason is the fill-height dependence of the pressure at the orifice. We study the statistics of silo discharge of soft hydrogel spheres. The outflow is found to become increasingly fluctuating and even intermittent with decreasing orifice size, and with decreasing fill height. In orifices narrower than two particle diameters, outflow can stop completely, but in contrast to clogs formed by rigid particles, these congestions may dissolve spontaneously. We analyze such non-permanent congestions and attribute them to slow reorganization processes in the container, caused by viscoelasticity of the material.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Interacting jammed granular systems
Authors:
Sára Lévay,
David Fischer,
Ralf Stannarius,
Ellák Somfai,
Tamás Börzsönyi,
Lothar Brendel,
János Török
Abstract:
More than 30 years ago Edwards and co-authors proposed a model to describe the statistics of granular packings by an ensemble of equiprobable jammed states. Experimental tests of this model remained scarce so far. We introduce a simple system to analyze statistical properties of jammed granular ensembles to test Edwards theory. Identical spheres packed in a nearly two-dimensional geometrical confi…
▽ More
More than 30 years ago Edwards and co-authors proposed a model to describe the statistics of granular packings by an ensemble of equiprobable jammed states. Experimental tests of this model remained scarce so far. We introduce a simple system to analyze statistical properties of jammed granular ensembles to test Edwards theory. Identical spheres packed in a nearly two-dimensional geometrical confinement were studied in experiments and numerical simulations. When tapped, the system evolves towards a ground state, but due to incompatible domain structures it gets trapped. Analytical calculations reproduce relatively well our simulation results, which allows us to test Edwards theory on a coupled system of two subsystems with different properties. We find that the joint system can only be described by the Edwards theory if considered as a single system due to the constraints in the stresses. The results show counterintuitive effects as in the coupled system the change in the order parameter is opposite to what is expected from the change in the compactivity.
△ Less
Submitted 12 April, 2021; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Flow of anisometric particles in a quasi-2D hopper
Authors:
Balazs Szabo,
Zsolt Kovacs,
Sandra Wegner,
Ahmed Ashour,
David Fischer,
Ralf Stannarius,
Tamas Borzsonyi
Abstract:
The stationary flow field in a quasi-two-dimensional hopper is investigated experimentally. The behavior of materials consisting of beads and elongated particles with different aspect ratio is compared. We show, that while the vertical velocity in the flowing region can be fitted with a Gaussian function for beads, in the case of elongated grains the flowing channel is narrower and is bordered wit…
▽ More
The stationary flow field in a quasi-two-dimensional hopper is investigated experimentally. The behavior of materials consisting of beads and elongated particles with different aspect ratio is compared. We show, that while the vertical velocity in the flowing region can be fitted with a Gaussian function for beads, in the case of elongated grains the flowing channel is narrower and is bordered with sharper velocity gradient. For this case, we quantify deviations from the Gaussian velocity profile. Relative velocity fluctuations are considerably larger and slower for elongated grains.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Rheology of dense granular flows for elongated particles
Authors:
Dániel B. Nagy,
Philippe Claudin,
Tamás Börzsönyi,
Ellák Somfai
Abstract:
We study the rheology of dense granular flows for frictionless spherocylinders by means of 3D numerical simulations. As in the case of spherical particles, the effective friction $μ$ is an increasing function of the inertial number $I$, and we systematically investigate the dependence of $μ$ on the particle aspect ratio $Q$, as well as that of the normal stress differences, the volume fraction and…
▽ More
We study the rheology of dense granular flows for frictionless spherocylinders by means of 3D numerical simulations. As in the case of spherical particles, the effective friction $μ$ is an increasing function of the inertial number $I$, and we systematically investigate the dependence of $μ$ on the particle aspect ratio $Q$, as well as that of the normal stress differences, the volume fraction and the coordination number. We show in particular that the quasi-static friction coefficient is non-monotonic with $Q$: from the spherical case $Q=1$, it first sharply increases, reaches a maximum around $Q \simeq 1.05$, and then gently decreases, reaching back its initial value for $Q \simeq 2$. We provide a microscopic interpretation for this unexpected behavior through the analysis of the distribution of dissipative contacts around the particles: as compared to spheres, slightly elongated grains enhance contacts in their central cylindrical band, whereas at larger aspect ratios particles tend to align and dissipate by preferential contacts at their hemispherical caps.
△ Less
Submitted 18 October, 2017;
originally announced October 2017.
-
Silo outflow of soft frictionless spheres
Authors:
Ahmed Ashour,
Torsten Trittel,
Tamas Börzsönyi,
Ralf Stannarius
Abstract:
Outflow of granular materials from silos is a remarkably complex physical phenomenon that has been extensively studied with simple objects like monodisperse hard disks in two dimensions (2D) and hard spheres in 2D and 3D. For those materials, empirical equations were found that describe the discharge characteristics. Softness adds qualitatively new features to the dynamics and to the character of…
▽ More
Outflow of granular materials from silos is a remarkably complex physical phenomenon that has been extensively studied with simple objects like monodisperse hard disks in two dimensions (2D) and hard spheres in 2D and 3D. For those materials, empirical equations were found that describe the discharge characteristics. Softness adds qualitatively new features to the dynamics and to the character of the flow. We report a study of the outflow of soft, practically frictionless hydrogel spheres from a quasi-2D bin. Prominent features are intermittent clogs, peculiar flow fields in the container and a pronounced dependence of the flow rate and clogging statistics on the container fill height. The latter is a consequence of the ineffectiveness of Janssen's law: the pressure at the bottom of a bin containing hydrogel spheres grows linearly with the fill height.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
Packing, alignment and flow of shape-anisotropic grains in a 3D silo experiment
Authors:
Tamás Börzsönyi,
Ellák Somfai,
Balázs Szabó,
Sandra Wegner,
Pascal Mier,
Georg Rose,
Ralf Stannarius
Abstract:
Granular material flowing through bottlenecks like the openings of silos tend to clog and to inhibit further flow. We study this phenomenon in a three-dimensional hopper for spherical and shape-anisotropic particles by means of X-ray tomography. The X-ray tomograms provide information on the bulk of the granular filling, and allows to determine the particle positions and orientations inside the si…
▽ More
Granular material flowing through bottlenecks like the openings of silos tend to clog and to inhibit further flow. We study this phenomenon in a three-dimensional hopper for spherical and shape-anisotropic particles by means of X-ray tomography. The X-ray tomograms provide information on the bulk of the granular filling, and allows to determine the particle positions and orientations inside the silo. In addition, it allows to calculate local packing densities in different parts of the container. We find that in the flowing zone of the silo particles show a preferred orientation and thereby a higher order. Similarly to simple shear flows, the average orientation of the particles is not parallel to the streamlines but encloses a certain angle with it. In most parts of the hopper, the angular distribution of the particles did not reach the one corresponding to stationary shear flow, thus the average orientation angle in the hopper deviates more from the streamlines than in stationary shear flows. In the flowing parts of the silo shear induced dilation is observed, which is more pronounced for elongated grains than for nearly spherical particles. The clogged state is characterized by a dome, i. e. the geometry of the layer of grains blocking the outflow. The shape of the dome depends on the particle shape.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
-
Heaping, Secondary Flows and Broken Symmetry in Flows of Elongated Granular Particles
Authors:
Geert Wortel,
Tamás Börzsönyi,
Ellák Somfai,
Sandra Wegner,
Balázs Szabó,
Ralf Stannarius,
Martin van Hecke
Abstract:
In this paper we report experiments where we shear granular rods in split-bottom geometries, and find that a significant heap of height of least 40% of the filling height can form at the particle surface. We show that heaping is caused by a significant secondary flow, absent for spherical particles. Flow reversal transiently reverses the secondary flow, leading to a quick collapse and slower regen…
▽ More
In this paper we report experiments where we shear granular rods in split-bottom geometries, and find that a significant heap of height of least 40% of the filling height can form at the particle surface. We show that heaping is caused by a significant secondary flow, absent for spherical particles. Flow reversal transiently reverses the secondary flow, leading to a quick collapse and slower regeneration of the heap. We present a symmetry argument and experimental data that show that the generation of the secondary flow is driven by a misalignment of the mean particle orientation with the streamlines of the flow. This general mechanism is expected to be important in all flows of sufficiently anisometric grains.
△ Less
Submitted 10 February, 2015; v1 submitted 12 November, 2014;
originally announced November 2014.
-
Evolution of shear zones in granular materials
Authors:
Balazs Szabo,
Janos Torok,
Ellak Somfai,
Sandra Wegner,
Ralf Stannarius,
Axel Bose,
Georg Rose,
Frank Angenstein,
Tamas Borzsonyi
Abstract:
The evolution of wide shear zones (or shear bands) was investigated experimentally and numerically for quasistatic dry granular flows in split bottom shear cells. We compare the behavior of materials consisting of beads, irregular grains (e.g. sand) and elongated particles. Shearing an initially random sample, the zone width was found to significantly decrease in the first stage of the process. Th…
▽ More
The evolution of wide shear zones (or shear bands) was investigated experimentally and numerically for quasistatic dry granular flows in split bottom shear cells. We compare the behavior of materials consisting of beads, irregular grains (e.g. sand) and elongated particles. Shearing an initially random sample, the zone width was found to significantly decrease in the first stage of the process. The characteristic shear strain associated with this decrease is about unity and it is systematically increasing with shape anisotropy, i.e. when the grain shape changes from spherical to irregular (e.g. sand) and becomes elongated (pegs). The strongly decreasing tendency of the zone width is followed by a slight increase which is more pronounced for rod like particles than for grains with smaller shape anisotropy (beads or irregular particles). The evolution of the zone width is connected to shear induced density change and for nonspherical particles it also involves grain reorientation effects. The final zone width is significantly smaller for irregular grains than for spherical beads.
△ Less
Submitted 7 August, 2014; v1 submitted 18 July, 2014;
originally announced July 2014.
-
Effects of grain shape on packing and dilatancy of sheared granular materials
Authors:
Sandra Wegner,
Ralf Stannarius,
Axel Boese,
Georg Rose,
Balázs Szabó,
Ellák Somfai,
Tamás Börzsönyi
Abstract:
Granular material exposed to shear shows a variety of unique phenomena: Reynolds dilatancy, positional order and orientational order effects may compete in the shear zone. We study granular packings consisting of macroscopic prolate, oblate and spherical grains and compare their behaviour. X-ray tomography is used to determine the particle positions and orientations in a cylindrical split bottom s…
▽ More
Granular material exposed to shear shows a variety of unique phenomena: Reynolds dilatancy, positional order and orientational order effects may compete in the shear zone. We study granular packings consisting of macroscopic prolate, oblate and spherical grains and compare their behaviour. X-ray tomography is used to determine the particle positions and orientations in a cylindrical split bottom shear cell. Packing densities and the arrangements of individual particles in the shear zone are evaluated. For anisometric particles, we observe the competition of two opposite effects. One the one hand, the sheared granulate is dilated, but on the other hand the particles reorient and align with respect to the streamlines. Even though aligned cylinders in principle may achieve higher packing densities, this alignment compensates for the effect of dilatancy only partially. The complex rearrangements lead to a depression of the surface above the well oriented region while neigbouring parts still show the effect of dilation in the form of heaps. For grains with isotropic shapes, the surface remains rather flat. Perfect monodisperse spheres crystallize in the shear zone, whereby positional order partially overcompensates dilatancy effects. However, already slight deviations from the ideal monodisperse sphere shape inhibit crystallization.
△ Less
Submitted 5 June, 2014;
originally announced June 2014.
-
Granular materials composed of shape-anisotropic grains
Authors:
Tamas Borzsonyi,
Ralf Stannarius
Abstract:
Granulate physics has made considerable progress during the past decades in the understanding of static and dynamic properties of large ensembles of interacting macroscopic particles, including the modeling of phenomena like jamming, segregation and pattern formation, the development of related industrial applications or traffic flow control. The specific properties of systems composed of shape-an…
▽ More
Granulate physics has made considerable progress during the past decades in the understanding of static and dynamic properties of large ensembles of interacting macroscopic particles, including the modeling of phenomena like jamming, segregation and pattern formation, the development of related industrial applications or traffic flow control. The specific properties of systems composed of shape-anisotropic (elongated or flattened) particles have attracted increasing interest in recent years. Orientational order and self-organization are among the characteristic phenomena that add to the special features of granular matter of spherical or irregular particles. An overview of this research field is given.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
Shear induced alignment and dynamics of elongated granular particles
Authors:
Tamas Borzsonyi,
Balazs Szabo,
Sandra Wegner,
Kirsten Harth,
Janos Torok,
Ellak Somfai,
Tomasz Bien,
Ralf Stannarius
Abstract:
The alignment, ordering and rotation of elongated granular particles was studied in shear flow. The time evolution of the orientation of a large number of particles was monitored in laboratory experiments by particle tracking using optical imaging and x-ray computed tomography. The experiments were complemented by discrete element simulations. The particles develop an orientational order. In the s…
▽ More
The alignment, ordering and rotation of elongated granular particles was studied in shear flow. The time evolution of the orientation of a large number of particles was monitored in laboratory experiments by particle tracking using optical imaging and x-ray computed tomography. The experiments were complemented by discrete element simulations. The particles develop an orientational order. In the steady state the time and ensemble averaged direction of the main axis of the particles encloses a small angle with the streamlines. This shear alignment angle is independent of the applied shear rate, and it decreases with increasing grain aspect ratio. At the grain level the steady state is characterized by a net rotation of the particles, as dictated by the shear flow. The distribution of particle rotational velocities was measured both in the steady state and also during the initial transients. The average rotation speed of particles with their long axis perpendicular to the shear alignment angle is larger, while shear aligned particles rotate slower. The ratio of this fast/slow rotation increases with particle aspect ratio. During the initial transient starting from an unaligned initial condition, particles having an orientation just beyond the shear alignment angle rotate opposite to the direction dictated by the shear flow.
△ Less
Submitted 13 November, 2012;
originally announced November 2012.
-
Orientational order and alignment of elongated particles induced by shear
Authors:
Tamas Borzsonyi,
Balazs Szabo,
Gabor Toros,
Sandra Wegner,
Janos Torok,
Ellak Somfai,
Tomasz Bien,
Ralf Stannarius
Abstract:
Shear induced alignment of elongated particles is studied experimentally and numerically. We show that shear alignment of ensembles of macroscopic particles is comparable even on a quantitative level to simple molecular systems, despite the completely different types of particle interactions. We demonstrate that for dry elongated grains the preferred orientation forms a small angle with the stream…
▽ More
Shear induced alignment of elongated particles is studied experimentally and numerically. We show that shear alignment of ensembles of macroscopic particles is comparable even on a quantitative level to simple molecular systems, despite the completely different types of particle interactions. We demonstrate that for dry elongated grains the preferred orientation forms a small angle with the streamlines, independent of shear rate across three decades. For a given particle shape, this angle decreases with increasing aspect ratio of the particles. The shear-induced alignment results in a considerable reduction of the effective friction of the granular material.
△ Less
Submitted 26 April, 2012;
originally announced April 2012.
-
Reflection and Exclusion of Shear Zones in Inhomogeneous Granular Materials
Authors:
Tamas Borzsonyi,
Tamas Unger,
Balazs Szabo,
Sandra Wegner,
Frank Angenstein,
Ralf Stannarius
Abstract:
Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle…
▽ More
Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle of refraction in optics. The zone leaves and reenters the high friction region at this critical angle and in between it stays near the interface in the low friction region. The formalism describing the geometry of the shear zones and that of refracted and reflected light beams is very similar. For the internal visualization of shear localization two independent experimental techniques were used (i) excavation and (ii) Magnetic Resonance Imaging.
△ Less
Submitted 17 August, 2011;
originally announced August 2011.
-
High speed imaging of traveling waves in a granular material during silo discharge
Authors:
Tamas Borzsonyi,
Zsolt Kovacs
Abstract:
We report experimental observations of sound waves in a granular material during resonant silo discharge called silo music. The grain motion was tracked by high speed imaging while the resonance of the silo was detected by accelerometers and acoustic methods. The grains do not oscillate in phase at neighboring vertical locations, but information propagates upward in this system in the form of soun…
▽ More
We report experimental observations of sound waves in a granular material during resonant silo discharge called silo music. The grain motion was tracked by high speed imaging while the resonance of the silo was detected by accelerometers and acoustic methods. The grains do not oscillate in phase at neighboring vertical locations, but information propagates upward in this system in the form of sound waves. We show that the wave velocity is not constant throughout the silo, but considerably increases towards the lower end of the system, suggesting increased pressure in this region, where the flow changes from cylindrical to converging flow. In the upper part of the silo the wave velocity matches the sound velocity measured in the same material when standing (in the absence of flow). Grain oscillations show a stick-slip character only in the upper part of the silo.
△ Less
Submitted 3 February, 2011;
originally announced February 2011.
-
Weakly faceted cellular patterns versus growth-induced plastic deformation in thin-sample directional solidification of monoclinic biphenyl
Authors:
Tamas Borzsonyi,
Silvere Akamatsu,
Gabriel Faivre
Abstract:
We present an experimental study of thin-sample directional solidification (T-DS) in impure biphenyl. The plate-like growth shape of the monoclinic biphenyl crystals includes two low-mobility (001) facets and four high-mobility {110} facets. Upon T-DS, biphenyl plates oriented with (001) facets parallel to the sample plane can exhibit either a strong growth-induced plastic deformation (GID), or…
▽ More
We present an experimental study of thin-sample directional solidification (T-DS) in impure biphenyl. The plate-like growth shape of the monoclinic biphenyl crystals includes two low-mobility (001) facets and four high-mobility {110} facets. Upon T-DS, biphenyl plates oriented with (001) facets parallel to the sample plane can exhibit either a strong growth-induced plastic deformation (GID), or deformation-free weakly faceted (WF) growth patterns. We determine the respective conditions of appearance of these phenomena. GID is shown to be a long-range thermal-stress effect, which disappears when the growth front has a cellular structure. An early triggering of the cellular instability allowed us to avoid GID and study the dynamics of WF patterns as a function of the orientation of the crystal.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
Patterns in Flowing Sand: Understanding the Physics of Granular Flow
Authors:
Tamas Borzsonyi,
Robert E. Ecke,
Jim N. McElwaine
Abstract:
Dense granular flows are often unstable and form inhomogeneous structures. Although significant advances have been recently made in understanding simple flows, instabilities of such flows are often not understood. We present experimental and numerical results that show the formation of longitudinal stripes that arise from instability of the uniform flowing state of granular media on a rough incl…
▽ More
Dense granular flows are often unstable and form inhomogeneous structures. Although significant advances have been recently made in understanding simple flows, instabilities of such flows are often not understood. We present experimental and numerical results that show the formation of longitudinal stripes that arise from instability of the uniform flowing state of granular media on a rough inclined plane. The form of the stripes depends critically on the mean density of the flow with a robust form of stripes at high density that consists of fast sliding plug-like regions (stripes) on top of highly agitated boiling material - a configuration reminiscent of the Leidenfrost effect when a droplet of liquid lifted by its vapor is hovering above a hot surface.
△ Less
Submitted 1 October, 2009;
originally announced October 2009.
-
Shear zone refraction and deflection in layered granular materials
Authors:
Tamas Borzsonyi,
Tamas Unger,
Balazs Szabo
Abstract:
Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure…
▽ More
Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure conditions (i.e. in the presence of gravity) the zone can also be deflected by the interface so that the deformation of the high friction material is avoided.
△ Less
Submitted 9 December, 2009; v1 submitted 11 June, 2009;
originally announced June 2009.
-
Avalanche dynamics on a rough inclined plane
Authors:
Tamas Borzsonyi,
Thomas C. Halsey,
Robert E. Ecke
Abstract:
Avalanche behavior of gravitationally-forced granular layers on a rough inclined plane are investigated experimentally for different materials and for a variety of grain shapes ranging from spherical beads to highly anisotropic particles with dendritic shape. We measure the front velocity, area and the height of many avalanches and correlate the motion with the area and height. We also measure t…
▽ More
Avalanche behavior of gravitationally-forced granular layers on a rough inclined plane are investigated experimentally for different materials and for a variety of grain shapes ranging from spherical beads to highly anisotropic particles with dendritic shape. We measure the front velocity, area and the height of many avalanches and correlate the motion with the area and height. We also measure the avalanche profiles for several example cases. As the shape irregularity of the grains is increased, there is a dramatic qualitative change in avalanche properties. For rough non-spherical grains, avalanches are faster, bigger and overturning in the sense that individual particles have down-slope speeds $u_p$ that exceed the front speed $u_f$ as compared with avalanches of spherical glass beads that are quantitatively slower, smaller and where particles always travel slower than the front speed. There is a linear increase of three quantities i) dimensionless avalanche height ii) ratio of particle to front speed and iii) the growth rate of avalanche speed with increasing avalanche size with increasing $\tanθ_r$ where $θ_r$ is the bulk angle of repose, or with increasing $β_P$, the slope of the depth averaged flow rule, where both $θ_r$ and $β_P$ reflect the grain shape irregularity. These relations provide a tool for predicting important dynamical properties of avalanches as a function of grain shape irregularity. A relatively simple depth-averaged theoretical description captures some important elements of the avalanche motion, notably the existence of two regimes of this motion.
△ Less
Submitted 31 March, 2008;
originally announced March 2008.
-
Phase Field Theory of Nucleation and Polycrystalline Pattern Formation
Authors:
L. Granasy,
T. Pusztai,
T. Borzsonyi
Abstract:
We review our recent modeling of crystal nucleation and polycrystalline growth using a phase field theory. First, we consider the applicability of phase field theory for describing crystal nucleation in a model hard sphere fluid. It is shown that the phase field theory accurately predicts the nucleation barrier height for this liquid when the model parameters are fixed by independent molecular d…
▽ More
We review our recent modeling of crystal nucleation and polycrystalline growth using a phase field theory. First, we consider the applicability of phase field theory for describing crystal nucleation in a model hard sphere fluid. It is shown that the phase field theory accurately predicts the nucleation barrier height for this liquid when the model parameters are fixed by independent molecular dynamics calculations. We then address various aspects of polycrystalline solidification and associated crystal pattern formation at relatively long timescales. This late stage growth regime, which is not accessible by molecular dynamics, involves nucleation at the growth front to create new crystal grains in addition to the effects of primary nucleation. Finally, we consider the limit of extreme polycrystalline growth, where the disordering effect due to prolific grain formation leads to isotropic growth patterns at long times, i.e., spherulite formation. Our model of spherulite growth exhibits branching at fixed grain misorientations, induced by the inclusion of a metastable minimum in the orientational free energy. It is demonstrated that a broad variety of spherulitic patterns can be recovered by changing only a few model parameters.
△ Less
Submitted 26 March, 2007;
originally announced March 2007.
-
Flow rule of dense granular flows down a rough incline
Authors:
Tamas Borzsonyi,
Robert E. Ecke
Abstract:
We present experimental findings on the flow rule for granular flows on a rough inclined plane using various materials including sand and glass beads of various sizes and four types of copper particles with different shapes. We characterize the materials by measuring $h_s$ (the thickness at which the flow subsides) as a function of the plane inclination $θ$ on various surfaces. Measuring the sur…
▽ More
We present experimental findings on the flow rule for granular flows on a rough inclined plane using various materials including sand and glass beads of various sizes and four types of copper particles with different shapes. We characterize the materials by measuring $h_s$ (the thickness at which the flow subsides) as a function of the plane inclination $θ$ on various surfaces. Measuring the surface velocity $u$ of the flow as a function of flow thickness $h$, we find that for sand and glass beads the Pouliquen flow rule $u/\sqrt{gh} \sim βh/h_s$ provides reasonable but not perfect collapse of the $u(h)$ curves measured for various $θ$ and mean particle diameter $d$. Improved collapse is obtained for sand and glass beads by using a recently proposed scaling of the form $u/\sqrt{gh} =β\cdot h \tan^2θ/h_s\ \tan^2θ_1$ where $θ_1$ is the angle at which the $h_s(θ)$ curves diverge. Measuring the slope $β$ for ten different sizes of sand and glass beads, we find a systematic, strong increase of $β$ with the divergence angle $θ_1$ of $h_s$. The copper materials with different shapes are not well described by either flow rule with $u \sim h^{3/2}$.
△ Less
Submitted 9 July, 2007; v1 submitted 5 March, 2007;
originally announced March 2007.
-
Rapid granular flows on a rough incline: phase diagram, gas transition, and effects of air drag
Authors:
Tamas Borzsonyi,
Robert E. Ecke
Abstract:
We report experiments on the overall phase diagram of granular flows on an incline with emphasis on high inclination angles where the mean layer velocity approaches the terminal velocity of a single particle free falling in air. The granular flow was characterized by measurements of the surface velocity, the average layer height, and the mean density of the layer as functions of the hopper openi…
▽ More
We report experiments on the overall phase diagram of granular flows on an incline with emphasis on high inclination angles where the mean layer velocity approaches the terminal velocity of a single particle free falling in air. The granular flow was characterized by measurements of the surface velocity, the average layer height, and the mean density of the layer as functions of the hopper opening, the plane inclination angle and the downstream distance x of the flow. At high inclination angles the flow does not reach an x-invariant steady state over the length of the inclined plane. For low volume flow rates, a transition was detected between dense and very dilute (gas) flow regimes. We show using a vacuum flow channel that air did not qualitatively change the phase diagram and did not quantitatively modify mean flow velocities of the granular layer except for small changes in the very dilute gas-like phase.
△ Less
Submitted 16 November, 2006;
originally announced November 2006.
-
Two scenarios for avalanche dynamics in inclined granular layers
Authors:
Tamas Borzsonyi,
Thomas C. Halsey,
Robert E. Ecke
Abstract:
We report experimental measurements of avalanche behavior of thin granular layers on an inclined plane for low volume flow rate. The dynamical properties of avalanches were quantitatively and qualitatively different for smooth glass beads compared to irregular granular materials such as sand. Two scenarios for granular avalanches on an incline are identified and a theoretical explanation for the…
▽ More
We report experimental measurements of avalanche behavior of thin granular layers on an inclined plane for low volume flow rate. The dynamical properties of avalanches were quantitatively and qualitatively different for smooth glass beads compared to irregular granular materials such as sand. Two scenarios for granular avalanches on an incline are identified and a theoretical explanation for these different scenarios is developed based on a depth-averaged approach that takes into account the differing rheologies of the granular materials.
△ Less
Submitted 12 April, 2005;
originally announced April 2005.
-
Surface effects in nucleation and growth of smectic B crystals in thin samples
Authors:
T. Borzsonyi,
S. Akamatsu
Abstract:
We present an experimental study of the surface effects (interactions with the container walls) during the nucleation and growth of smectic B crystals from the nematic in free growth and directional solidification of a mesogenic molecule ($C_4H_9-(C_6H_{10})_2CN$) called CCH4 in thin (of thickness in the 10 $μ$m range) samples. We follow the dynamics of the system in real time with a polarizing…
▽ More
We present an experimental study of the surface effects (interactions with the container walls) during the nucleation and growth of smectic B crystals from the nematic in free growth and directional solidification of a mesogenic molecule ($C_4H_9-(C_6H_{10})_2CN$) called CCH4 in thin (of thickness in the 10 $μ$m range) samples. We follow the dynamics of the system in real time with a polarizing microscope. The inner surfaces of the glass-plate samples are coated with polymeric films, either rubbed polyimid (PI) films or monooriented poly(tetrafluoroethylene) (PTFE) films deposited by friction at high temperature. The orientation of the nematic and the smectic B is planar. In PI-coated samples, the orientation effect of SmB crystals is mediated by the nematic, whereas, in PTFE-coated samples, it results from a homoepitaxy phenomenon occurring for two degenerate orientations. A recrystallization phenomenon partly destroys the initial distribution of crystal orientations. In directional solidification of polycrystals in PTFE-coated samples, a particular dynamics of faceted grain boundary grooves is at the origin of a dynamical mechanism of grain selection. Surface effects also are responsible for the nucleation of misoriented terraces on facets and the generation of lattice defects in the solid.
△ Less
Submitted 23 October, 2002;
originally announced October 2002.
-
Nucleation and Bulk Crystallization in Binary Phase Field Theory
Authors:
Laszlo Granasy,
Tamas Borzsonyi,
Tamas Pusztai
Abstract:
We present a phase field theory for binary crystal nucleation. In the one-component limit, quantitative agreement is achieved with computer simulations (Lennard-Jones system) and experiments (ice-water system) using model parameters evaluated from the free energy and thickness of the interface. The critical undercoolings predicted for Cu-Ni alloys accord with the measurements, and indicate homog…
▽ More
We present a phase field theory for binary crystal nucleation. In the one-component limit, quantitative agreement is achieved with computer simulations (Lennard-Jones system) and experiments (ice-water system) using model parameters evaluated from the free energy and thickness of the interface. The critical undercoolings predicted for Cu-Ni alloys accord with the measurements, and indicate homogeneous nucleation. The Kolmogorov exponents deduced for dendritic solidification and for "soft-impingement" of particles via diffusion fields are consistent with experiment.
△ Less
Submitted 5 April, 2002;
originally announced April 2002.
-
Dynamics of a faceted nematic-smectic B front in thin-sample directional solidification
Authors:
T. Borzsonyi,
S. Akamatsu,
G. Faivre
Abstract:
We present an experimental study of the directional-solidification patterns of a nematic - smectic B front. The chosen system is C_4H_9-(C_6H_{10})_2CN (in short, CCH4) in 12 μm-thick samples, and in the planar configuration (director parallel to the plane of the sample). The nematic - smectic B interface presents a facet in one direction -- the direction parallel to the smectic layers -- and is…
▽ More
We present an experimental study of the directional-solidification patterns of a nematic - smectic B front. The chosen system is C_4H_9-(C_6H_{10})_2CN (in short, CCH4) in 12 μm-thick samples, and in the planar configuration (director parallel to the plane of the sample). The nematic - smectic B interface presents a facet in one direction -- the direction parallel to the smectic layers -- and is otherwise rough, and devoid of forbidden directions. We measure the Mullins-Sekerka instability threshold and establish the morphology diagram of the system as a function of the solidification rate V and the angle theta_{0} between the facet and the isotherms. We focus on the phenomena occurring immediately above the instability threshold when theta_{0} is neither very small nor close to 90^{o}. Under these conditions we observe drifting shallow cells and a new type of solitary wave, called "faceton", which consists essentially of an isolated macroscopic facet traveling laterally at such a velocity that its growth rate with respect to the liquid is small. Facetons may propagate either in a stationary, or an oscillatory way. The detailed study of their dynamics casts light on the microscopic growth mechanisms of the facets in this system.
△ Less
Submitted 7 September, 2001;
originally announced September 2001.
-
Regular dendritic patterns induced by non-local time-periodic forcing
Authors:
T. Borzsonyi,
T. Toth-Katona,
A. Buka,
L. Granasy
Abstract:
The dynamic response of dendritic solidification to spatially homogeneous time-periodic forcing has been studied. Phase-field calculations performed in two dimensions (2D) and experiments on thin (quasi 2D) liquid crystal layers show that the frequency of dendritic side-branching can be tuned by oscillatory pressure or heating. The sensitivity of this phenomenon to the relevant parameters, the f…
▽ More
The dynamic response of dendritic solidification to spatially homogeneous time-periodic forcing has been studied. Phase-field calculations performed in two dimensions (2D) and experiments on thin (quasi 2D) liquid crystal layers show that the frequency of dendritic side-branching can be tuned by oscillatory pressure or heating. The sensitivity of this phenomenon to the relevant parameters, the frequency and amplitude of the modulation, the initial undercooling and the anisotropies of the interfacial free energy and molecule attachment kinetics, has been explored. It has been demonstrated that besides the side-branching mode synchronous with external forcing as emerging from the linear Wentzel-Kramers-Brillouin analysis, modes that oscillate with higher harmonic frequencies are also present with perceptible amplitudes.
△ Less
Submitted 19 June, 2000;
originally announced June 2000.
-
Director precession and nonlinear waves in nematic liquid crystals under elliptic shear
Authors:
T. Borzsonyi,
A. Buka,
A. P. Krekhov,
O. A. Scaldin,
L. Kramer
Abstract:
Elliptic shear applied to a homeotropically oriented nematic above the electric bend Freedericks transition (FT) generates slow precession of the director. The character of the accompanying nonlinear waves changes from diffusive phase waves to dispersive ones exhibiting spirals and spatio-temporal chaos as the FT is approached from above. An exact solution of the flow alignment equations capture…
▽ More
Elliptic shear applied to a homeotropically oriented nematic above the electric bend Freedericks transition (FT) generates slow precession of the director. The character of the accompanying nonlinear waves changes from diffusive phase waves to dispersive ones exhibiting spirals and spatio-temporal chaos as the FT is approached from above. An exact solution of the flow alignment equations captures the observed precession and predicts its reversal for non-flow aligning materials. The FT transforms into a Hopf bifurcation opening the way to understand the wave phenomena.
△ Less
Submitted 16 November, 1999;
originally announced November 1999.
