-
Calculation of the transient response of lossless transmission lines
Authors:
Takamitsu Koyano,
Jake S. Bobowski
Abstract:
We present an analytical calculation of the transient response of ideal (i.e. lossless) transmission lines. The calculation presented considers a length of transmission line connected to a signal generator with output impedance $Z_\mathrm{g}$ and terminated with a load impedance $Z_\mathrm{L}$. The approach taken is to analyze a circuit model of the system in the complex-frequency or $s$-domain an…
▽ More
We present an analytical calculation of the transient response of ideal (i.e. lossless) transmission lines. The calculation presented considers a length of transmission line connected to a signal generator with output impedance $Z_\mathrm{g}$ and terminated with a load impedance $Z_\mathrm{L}$. The approach taken is to analyze a circuit model of the system in the complex-frequency or $s$-domain and then apply an inverse Laplace transform to recover the time-domain response. We consider both rectangular pulses and voltage steps (i.e. the Heaviside function) applied to the input of the transmission line. Initially, we assume that $Z_\mathrm{g}$ and $Z_\mathrm{L}$ are purely real/resistive. At the end of the paper, we demonstrate how the calculations can be generalized to consider reactive impedances.
△ Less
Submitted 20 May, 2023;
originally announced June 2023.
-
Novel setup for detecting short-range anisotropic corrections to gravity
Authors:
Jake S. Bobowski,
Hrishikesh Patel,
Mir Faizal
Abstract:
In this paper we argue that, even though there are strong theoretical and empirical reasons to expect a violation of spatial isotropy at short distances, contemporary setups for probing gravitational interactions at short distances have not been configured to measure such spatial anisotropies. We propose a simple modification to the state-of-the-art torsion pendulum design and numerically demonstr…
▽ More
In this paper we argue that, even though there are strong theoretical and empirical reasons to expect a violation of spatial isotropy at short distances, contemporary setups for probing gravitational interactions at short distances have not been configured to measure such spatial anisotropies. We propose a simple modification to the state-of-the-art torsion pendulum design and numerically demonstrate that it suppresses signals due to the large spatially-isotropic component of the gravitational force while maintaining a high sensitivity to short-range spatial anisotropies. We incorporate anisotropy using both Yukawa-type and power-law-type short-distance corrections to gravity. The proposed differential torsion pendulum is shown to be capable of making sensitive measurements of small gravitational anisotropies and the resulting anisotropic torques are largely independent of the details of the underlying short-distance modification to gravity. Thus, if there is an anisotropic modification to gravity, from any theory, in any form of the modified potential, the proposed setup provides a practical means of detecting it.
△ Less
Submitted 1 April, 2024; v1 submitted 2 August, 2022;
originally announced August 2022.
-
Non-local electrodynamics in ultra-pure PdCoO$_{2}$
Authors:
Graham Baker,
Timothy W. Branch,
J. S. Bobowski,
James Day,
Davide Valentinis,
Mohamed Oudah,
Philippa McGuinness,
Seunghyun Khim,
Piotr Surówka,
Yoshiteru Maeno,
Roderich Moessner,
Jörg Schmalian,
Andrew P. Mackenzie,
D. A. Bonn
Abstract:
The motion of electrons in the vast majority of conductors is diffusive, obeying Ohm's law. However, the recent discovery and growth of high-purity materials with extremely long electronic mean free paths has sparked interest in non-ohmic alternatives, including viscous and ballistic flow. Although non-ohmic transport regimes have been discovered across a range of materials, including two-dimensio…
▽ More
The motion of electrons in the vast majority of conductors is diffusive, obeying Ohm's law. However, the recent discovery and growth of high-purity materials with extremely long electronic mean free paths has sparked interest in non-ohmic alternatives, including viscous and ballistic flow. Although non-ohmic transport regimes have been discovered across a range of materials, including two-dimensional electron gases, graphene, topological semimetals, and the delafossite metals, determining their nature has proved to be challenging. Here, we report on a new approach to the problem, employing broadband microwave spectroscopy of the delafossite metal PdCoO$_{2}$ in three distinct sample geometries that would be identical for diffusive transport. The observed differences, which go as far as differing power laws, take advantage of the hexagonal symmetry of PdCoO$_{2}$. This permits a particularly elegant symmetry-based diagnostic for non-local electrodynamics, with the result favouring ballistic over strictly hydrodynamic flow. Furthermore, it uncovers a new effect for ballistic electron flow, owing to the highly facetted shape of the hexagonal Fermi surface. We combine our extensive dataset with an analysis of the Boltzmann equation to characterize the non-local regime in PdCoO$_{2}$. More broadly, our results highlight the potential of broadband microwave spectroscopy to play a central role in investigating exotic transport regimes in the new generation of ultra-high conductivity materials.
△ Less
Submitted 1 March, 2023; v1 submitted 29 April, 2022;
originally announced April 2022.
-
The Superconducting Transition and Mixed State of YBa$_2$Cu$_3$O$_{6.95}$: An Undergraduate Experiment
Authors:
Zhongda Huang,
Yihang Tong,
Jake S. Bobowski
Abstract:
We describe a simple AC susceptometer built in-house that can be used to make high-resolution measurements of the magnetic susceptibility of high-temperature superconductors in an undergraduate physics lab. Our system, cooled using liquid nitrogen, can reach a base temperature of 77 K. Our apparatus does not require gas handling systems or PID temperature controllers. Instead, it makes use of a th…
▽ More
We describe a simple AC susceptometer built in-house that can be used to make high-resolution measurements of the magnetic susceptibility of high-temperature superconductors in an undergraduate physics lab. Our system, cooled using liquid nitrogen, can reach a base temperature of 77 K. Our apparatus does not require gas handling systems or PID temperature controllers. Instead, it makes use of a thermal circuit that is designed to allow the sample to cool on a time scale that is suitable for an undergraduate lab. Furthermore, the temperature drift rate at the superconducting transition temperature $T_\mathrm{c}$ is low enough to allow for precise measurements of the complex magnetic susceptibility through $T_\mathrm{c}$, even for single-crystal samples with exceedingly sharp superconducting transitions. Using an electromagnet, we were able to apply static magnetic fields up to 63 mT at the sample site. By measuring the change in susceptibility as a function of the strength of an applied of static magnetic field, we were able to estimate the lower critical field $H_\mathrm{c1}$ of a single-crystal sample of optimally-doped YBa$_2$Cu$_3$O$_{6.95}$ at 77 K. We also investigated the mixed state of a sintered polycrystalline sample of YBa$_2$Cu$_3$O$_{6+y}$.
△ Less
Submitted 15 May, 2021;
originally announced May 2021.
-
Inductive Power Transfer Through Saltwater
Authors:
J. N. Wandinger,
D. M. Roberts,
J. S. Bobowski,
T. Johnson
Abstract:
We investigated inductive power transfer (IPT) through a rectangular slab of saltwater. Our inductively-coupled transmitters and receivers were made from loop-gap resonators (LGRs) having resonant frequencies near 100 MHz. Electric fields are confined within the narrow gaps of the LGRs making it possible to strongly suppress the power dissipation associated with electric fields in a conductive med…
▽ More
We investigated inductive power transfer (IPT) through a rectangular slab of saltwater. Our inductively-coupled transmitters and receivers were made from loop-gap resonators (LGRs) having resonant frequencies near 100 MHz. Electric fields are confined within the narrow gaps of the LGRs making it possible to strongly suppress the power dissipation associated with electric fields in a conductive medium. Therefore, the power transfer efficiency in our system was limited by magnetic field dissipation in the conducting medium. We measured the power transfer efficiency as a function of both the conductivity of the water and the resonant frequency of the LGRs. We also present an equivalent circuit model that can be used to model IPT through a conductive medium. Finally, we show that using dividers to partition the saltwater volume provides another means of enhancing power transfer efficiency.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Mid-Range Wireless Power Transfer at 100 MHz using Magnetically-Coupled Loop-Gap Resonators
Authors:
David M. Roberts,
Aaron P. Clements,
Rowan McDonald,
Jake S. Bobowski,
Thomas Johnson
Abstract:
We describe efficient four-coil inductive power transfer (IPT) systems that operate at 100 MHz. The magnetically-coupled transmitter and receiver were made from electrically-small and high-Q loop-gap resonators (LGRs). In contrast to the commonly-used helical and spiral resonators, the LGR design has the distinct advantage that electric fields are strongly confined to the capacitive gap of the res…
▽ More
We describe efficient four-coil inductive power transfer (IPT) systems that operate at 100 MHz. The magnetically-coupled transmitter and receiver were made from electrically-small and high-Q loop-gap resonators (LGRs). In contrast to the commonly-used helical and spiral resonators, the LGR design has the distinct advantage that electric fields are strongly confined to the capacitive gap of the resonator. With negligible fringing electric fields in the surrounding space, the IPT system is immune to interference from nearby dielectric objects, even when they are in close proximity to the transmitter and/or receiver. We experimented with both cylindrical and split-toroidal LGR geometries. Although both systems performed well under laboratory conditions, the toroidal geometry has the additional advantage that the magnetic flux is weak everywhere except within the bore of the LGR and in the space directly between the transmitter and receiver. Furthermore, we show that the toroidal LGR system can be operated efficiently at a fixed frequency for a wide range of transmitter-receiver distances. The experimental results are complimented by 3-D finite-element simulations which were used to investigate the electromagnetic field profiles and surface current density distributions. Finally, we demonstrate the use of our IPT system at powers up to 32 W and discuss possible applications.
△ Less
Submitted 30 April, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
The Hydraulic Analogues of Basic Circuits: Labs for Online Learning Environments
Authors:
J. S. Bobowski
Abstract:
In this paper we describe a couple of exercises that we developed for our online first-year EM course. The labs that we describe are focused on basic concepts from circuit analysis, namely Ohm's law and charging a capacitor with a constant voltage source and a series resistor. To give students a visual demonstration of these concepts and, simultaneously, provide a means for students to collect the…
▽ More
In this paper we describe a couple of exercises that we developed for our online first-year EM course. The labs that we describe are focused on basic concepts from circuit analysis, namely Ohm's law and charging a capacitor with a constant voltage source and a series resistor. To give students a visual demonstration of these concepts and, simultaneously, provide a means for students to collect their own unique dataset, hydraulic analogues of these electric circuits were built and a series of videos were recorded. Incidentally, the visual demonstrations may also help to alleviate some of the commonly-held student misconceptions about basic circuits. For this reason, even once in-person labs resume, we expect that the hydraulic analogue demonstrations will continue to be useful.
△ Less
Submitted 28 November, 2020;
originally announced November 2020.
-
Transients in lossy transmission lines
Authors:
J. S. Bobowski
Abstract:
Numerical inverse Laplace transforms are used to analyze the transient response of non-ideal transmission lines to a voltage step. We find that the detailed shape of the transient response is sensitive conductor losses, but insensitive to dielectric losses. Furthermore, we find that the low-loss approximations for the transmission line propagation constant and characteristic impedance in the compl…
▽ More
Numerical inverse Laplace transforms are used to analyze the transient response of non-ideal transmission lines to a voltage step. We find that the detailed shape of the transient response is sensitive conductor losses, but insensitive to dielectric losses. Furthermore, we find that the low-loss approximations for the transmission line propagation constant and characteristic impedance in the complex-frequency domain are sufficient to accurately model the observed transient response. We also investigate the effects of: (1) a parasitic capacitance terminating the open end of the coaxial transmission line, (2) the input impedance of the oscilloscope used to make the measurements, and (3) the finite rise time of the voltage step. Finally, we cool a semi-rigid coaxial cable in liquid nitrogen so as to reduced conductor lossless and observe a transient response that is closer to that expected from an ideal lossless line.
△ Less
Submitted 16 June, 2023; v1 submitted 1 November, 2020;
originally announced November 2020.
-
SNEWS 2.0: A Next-Generation SuperNova Early Warning System for Multi-messenger Astronomy
Authors:
S. Al Kharusi,
S. Y. BenZvi,
J. S. Bobowski,
W. Bonivento,
V. Brdar,
T. Brunner,
E. Caden,
M. Clark,
A. Coleiro,
M. Colomer-Molla,
J. I. Crespo-Anadón,
A. Depoian,
D. Dornic,
V. Fischer,
D. Franco,
W. Fulgione,
A. Gallo Rosso,
M. Geske,
S. Griswold,
M. Gromov,
D. Haggard,
A. Habig,
O. Halim,
A. Higuera,
R. Hill
, et al. (46 additional authors not shown)
Abstract:
The next core-collapse supernova in the Milky Way or its satellites will represent a once-in-a-generation opportunity to obtain detailed information about the explosion of a star and provide significant scientific insight for a variety of fields because of the extreme conditions found within. Supernovae in our galaxy are not only rare on a human timescale but also happen at unscheduled times, so i…
▽ More
The next core-collapse supernova in the Milky Way or its satellites will represent a once-in-a-generation opportunity to obtain detailed information about the explosion of a star and provide significant scientific insight for a variety of fields because of the extreme conditions found within. Supernovae in our galaxy are not only rare on a human timescale but also happen at unscheduled times, so it is crucial to be ready and use all available instruments to capture all possible information from the event. The first indication of a potential stellar explosion will be the arrival of a bright burst of neutrinos. Its observation by multiple detectors worldwide can provide an early warning for the subsequent electromagnetic fireworks, as well as signal to other detectors with significant backgrounds so they can store their recent data. The Supernova Early Warning System (SNEWS) has been operating as a simple coincidence between neutrino experiments in automated mode since 2005. In the current era of multi-messenger astronomy there are new opportunities for SNEWS to optimize sensitivity to science from the next Galactic supernova beyond the simple early alert. This document is the product of a workshop in June 2019 towards design of SNEWS 2.0, an upgraded SNEWS with enhanced capabilities exploiting the unique advantages of prompt neutrino detection to maximize the science gained from such a valuable event.
△ Less
Submitted 18 March, 2021; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Permittivity of waste-activated sludge by an open-ended coaxial line
Authors:
J. S. Bobowski,
T. Johnson,
C. Eskicioglu
Abstract:
The complex permittivity of thickened waste activated sludge (WAS) was measured from 3 MHz to 40 GHz. The solid content of the thickened WAS sample was varied from 4.5% to 18% by weight. The permittivity spectra exhibit features typical of biological tissues that have a high water content. At high frequencies, a Debye-type dispersion is observed with a relaxation rate of 19 GHz characteristic of t…
▽ More
The complex permittivity of thickened waste activated sludge (WAS) was measured from 3 MHz to 40 GHz. The solid content of the thickened WAS sample was varied from 4.5% to 18% by weight. The permittivity spectra exhibit features typical of biological tissues that have a high water content. At high frequencies, a Debye-type dispersion is observed with a relaxation rate of 19 GHz characteristic of the bulk water in the sample ($γ$-dispersion). At lower frequencies, the solid content of the samples determines the properties of the permittivity. The onset of the so-called $β$-dispersion, attributed to the charging of cell membranes, occurs between 10-100 MHz. For samples with higher solid concentrations, a weak dispersion of the real part of the permittivity, characteristic of bound water, was observed at intermediate frequencies ($δ$-dispersion).
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Permittivity measurements of biological samples by an open-ended coaxial line
Authors:
J. S. Bobowski,
T. Johnson
Abstract:
We previously reported on the complex permittivity and dc conductivity of waste-activated sludge. The measurements, spanning a frequency range of 3 MHz to 40 GHz, were made using an open-ended coaxial transmission line. Although this technique is well established in the literature, we found that it was necessary to combine methods from several papers to use the open-ended coaxial probe to reliably…
▽ More
We previously reported on the complex permittivity and dc conductivity of waste-activated sludge. The measurements, spanning a frequency range of 3 MHz to 40 GHz, were made using an open-ended coaxial transmission line. Although this technique is well established in the literature, we found that it was necessary to combine methods from several papers to use the open-ended coaxial probe to reliably characterize biological samples having a high dc conductivity. Here, we provide a set of detailed and practical guidelines that can be used to determine the permittivity and conductivity of biological samples over a broad frequency range. Due to the electrode polarization effect, low frequency measurements of conducting samples require corrections to extract the intrinsic electrical properties. We describe one practical correction scheme and verify its reliability using a control sample.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Calibrated Single-Contact Voltage Sensor for High-Voltage Monitoring Applications
Authors:
Jake S. Bobowski,
Saimoom Ferdous,
Thomas Johnson
Abstract:
A single-contact voltage sensor designed for accurate measurements of ac voltages across a pair of conductors is described. The sensor design is motivated by remote monitoring applications where accurate voltage measurement of high-voltage transmission lines is required. The body of the sensor is electrically and mechanically attached to a single conductor: either the neutral or high-voltage condu…
▽ More
A single-contact voltage sensor designed for accurate measurements of ac voltages across a pair of conductors is described. The sensor design is motivated by remote monitoring applications where accurate voltage measurement of high-voltage transmission lines is required. The body of the sensor is electrically and mechanically attached to a single conductor: either the neutral or high-voltage conductor. A capacitive sensing plate attached to the sensor creates a capacitive voltage divider using the stray capacitance to the non-contacted line. A very high-impedance buffer is used to measure the voltage across the divider output and estimate the line voltage. An important part of the work includes a method of calibrating the sensor such that blind voltage measurements can be made without knowing the exact geometry of the conductors. Other important aspects of the design include a two-stage voltage divider for retaining accuracy and increasing the voltage range of the sensor. The work is supported by extensive numerical simulation models which were used to determine the optimum design for the sensing plate and to evaluate the sensitivity to different configurations including conductor spacing and the height above ground. For calibration values which are accurate to 1%, the line voltage can be measured with an accuracy of 10%. The paper describes the theory, design, and experimental verification of the sensor up to a line voltage of 7.5 kVrms.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Modeling and measuring the non-ideal characteristics of transmission lines
Authors:
J. S. Bobowski
Abstract:
We describe a simple method to experimentally determine the frequency dependencies of the per-unit-length resistance and conductance of transmission lines. The experiment is intended as a supplement to the classic measurement of the transient response of a transmission line to a voltage step or pulse. In the transient experiment, an ideal (lossless) model of the transmission line is used to determ…
▽ More
We describe a simple method to experimentally determine the frequency dependencies of the per-unit-length resistance and conductance of transmission lines. The experiment is intended as a supplement to the classic measurement of the transient response of a transmission line to a voltage step or pulse. In the transient experiment, an ideal (lossless) model of the transmission line is used to determine the characteristic impedance and signal propagation speed. In our experiment, the insertion losses of various coaxial cables are measured as a function of frequency from 1 to 2000 MHz. A full distributed circuit model of the transmission line that includes both conductor and dielectric losses is needed to fit the frequency dependence of the measured insertion losses. Our model assumes physically-sensible frequency dependencies for the per-unit-length resistance and conductance that are determined by the geometry of the coaxial transmission lines used in the measurements.
△ Less
Submitted 10 August, 2020; v1 submitted 24 June, 2020;
originally announced June 2020.
-
The Complex Permeability of Split-Ring Resonator Arrays Measured at Microwave Frequencies
Authors:
Sabrina L. Madsen,
Jake S. Bobowski
Abstract:
We have measured the relative permeability of split-ring resonator (SRR) arrays used in metamaterials designed to have $μ^\prime< 0$ over a narrow range of microwave frequencies. The SRR arrays were loaded into the bore of a loop-gap resonator (LGR) and reflection coefficient measurements were used to determine both the real and imaginary parts of the array's effective permeability. Data were coll…
▽ More
We have measured the relative permeability of split-ring resonator (SRR) arrays used in metamaterials designed to have $μ^\prime< 0$ over a narrow range of microwave frequencies. The SRR arrays were loaded into the bore of a loop-gap resonator (LGR) and reflection coefficient measurements were used to determine both the real and imaginary parts of the array's effective permeability. Data were collected as a function of array size and SRR spacing. The results were compared to those obtained from continuous extended split-ring resonators (ESRRs). The arrays of planar SRRs exhibited enhanced damping and a narrower range of frequencies with $μ^\prime<0$ when compared to the ESRRs. The observed differences in damping, however, were diminished considerably when the array size was expanded from a one-dimensional array of $N$ SRRs to a $2\times 2\times N$ array. Our method can also be used to experimentally determine the effective permeability of other metamaterial designs.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Split superconducting and time-reversal symmetry-breaking transitions, and magnetic order in Sr$_2$RuO$_4$ under uniaxial stress
Authors:
Vadim Grinenko,
Shreenanda Ghosh,
Rajib Sarkar,
Jean-Christophe Orain,
Artem Nikitin,
Matthias Elender,
Debarchan Das,
Zurab Guguchia,
Felix Brückner,
Mark E. Barber,
Joonbum Park,
Naoki Kikugawa,
Dmitry A. Sokolov,
Jake S. Bobowski,
Takuto Miyoshi,
Yoshiteru Maeno,
Andrew P. Mackenzie,
Hubertus Luetkens,
Clifford W. Hicks,
Hans-Henning Klauss
Abstract:
Among unconventional superconductors, Sr$_2$RuO$_4$ has become a benchmark for experimentation and theoretical analysis because its normal-state electronic structure is known with exceptional precision, and because of experimental evidence that its superconductivity has, very unusually, a spontaneous angular momentum, i.e. a chiral state. This hypothesis of chirality is however difficult to reconc…
▽ More
Among unconventional superconductors, Sr$_2$RuO$_4$ has become a benchmark for experimentation and theoretical analysis because its normal-state electronic structure is known with exceptional precision, and because of experimental evidence that its superconductivity has, very unusually, a spontaneous angular momentum, i.e. a chiral state. This hypothesis of chirality is however difficult to reconcile with recent evidence on the spin part of the order parameter. Measurements under uniaxial stress offer an ideal way to test for chirality, because under uniaxial stress the superconducting and chiral transitions are predicted to split, allowing the empirical signatures of each to be identified separately. Here, we report zerofield muon spin relaxation (ZF-$μ$SR) measurements on crystals placed under uniaxial stresses of up to 1.05 GPa. We report a clear stress-induced splitting between the onset temperatures of superconductivity and time-reversal symmetry breaking, consistent with qualitative expectations for chiral superconductivity. We also report the appearance of unexpected bulk magnetic order under a uniaxial stress of ~ 1.0 GPa in clean Sr$_2$RuO$_4$.
△ Less
Submitted 6 February, 2020; v1 submitted 22 January, 2020;
originally announced January 2020.
-
Permittivity and Conductivity Measured using a Novel Toroidal Split-Ring Resonator
Authors:
Jake S. Bobowski,
Aaron P. Clements
Abstract:
We describe and demonstrate the use of a novel toroidal split-ring resonator to make accurate and precise measurements of the permittivity of liquids and gases. We first analytically show how the resonance frequency and quality factor of the resonator are related to the complex permittivity of the material filling its gap. We then use the resonator to experimentally determine the permittivity of a…
▽ More
We describe and demonstrate the use of a novel toroidal split-ring resonator to make accurate and precise measurements of the permittivity of liquids and gases. We first analytically show how the resonance frequency and quality factor of the resonator are related to the complex permittivity of the material filling its gap. We then use the resonator to experimentally determine the permittivity of a number of different materials. First, the compact and high-Q resonator is used to measure both the real and imaginary parts of the complex permittivity of methyl alcohol at 185 MHz. Second, the resonator was placed inside a vacuum-tight Dewar. We measured the resonance frequency with the resonator suspended in vacuum and then immersed in an atmosphere of air. From these data, the dielectric constant of air was accurately determined. Next, the resonator was submerged in liquid nitrogen and the boiling temperature of the nitrogen bath was manipulated by regulating its vapor pressure. This system allowed for a precise measurement of the dielectric constant of liquid nitrogen over a temperature range of 64 to 77 K. Finally, we monitored the quality factor of the copper resonator as its temperature drifted from 80 K to room temperature. From these data, we extracted the linear temperature dependence of copper's resistivity.
△ Less
Submitted 4 January, 2019;
originally announced January 2019.
-
Automation of the Cavendish Experiment to 'Weigh the Earth'
Authors:
J. J. Andrews,
J. S. Bobowski
Abstract:
We describe a simple and inexpensive method for automating the data collection in the well-known Cavendish torsion balance experiment to determine the gravitational constant $G$. The method uses a linear array of phototransistors and requires no moving parts. Multiplexers and a data-acquisition device are used to sample the state of each phototransistor sequentially. If the sampled phototransistor…
▽ More
We describe a simple and inexpensive method for automating the data collection in the well-known Cavendish torsion balance experiment to determine the gravitational constant $G$. The method uses a linear array of phototransistors and requires no moving parts. Multiplexers and a data-acquisition device are used to sample the state of each phototransistor sequentially. If the sampled phototransistor is illuminated by the laser spot, the position and time are recorded to a data file. The recorded data does an excellent job of capturing the damped harmonic oscillations. The resulting data were analysed to extract an experimental value of $G$ that was within 5% of the accepted value.
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
Quantitative Stirling Cycle Measurements: P-V Diagram and Refrigeration
Authors:
Y. J. Lu,
Hiroko Nakahara,
J. S. Bobowski
Abstract:
This paper describes simple modifications to a demonstration Stirling engine that allows one to make quantitative measurements of the Stirling cycle. First, we describe measurements of the $P$-$V$ diagram using an inexpensive pressure sensor and a common photogate. Then, as a supplement, the engine was run as a refrigerator by using a rotary tool to turn the flywheel of the engine. A small, but me…
▽ More
This paper describes simple modifications to a demonstration Stirling engine that allows one to make quantitative measurements of the Stirling cycle. First, we describe measurements of the $P$-$V$ diagram using an inexpensive pressure sensor and a common photogate. Then, as a supplement, the engine was run as a refrigerator by using a rotary tool to turn the flywheel of the engine. A small, but measurable, temperature difference developed across the body of the engine.
△ Less
Submitted 4 November, 2018;
originally announced December 2018.
-
Non-radiative mid-range wireless power transfer: An experiment for senior physics undergraduates
Authors:
S. D. Delichte,
Y. J. Lu,
J. S. Bobowski
Abstract:
A wireless power transfer experiment suitable for senior physics undergraduates that operates between 3 and 4 MHz is described and demonstrated in detail. The apparatus consists of a pair of identical resonant coils that can be moved relative to one another. A signal generator circuit is inductively coupled to the transmitting coil using a single loop of wire. Likewise, a single loop of wire coupl…
▽ More
A wireless power transfer experiment suitable for senior physics undergraduates that operates between 3 and 4 MHz is described and demonstrated in detail. The apparatus consists of a pair of identical resonant coils that can be moved relative to one another. A signal generator circuit is inductively coupled to the transmitting coil using a single loop of wire. Likewise, a single loop of wire couples the receiving coil to a load impedance. A matching circuit was used to tune the impedance of the system of coupled resonators to match the 50-$\ohm$ output impedance of the signal generator. A low-cost vector network analyzer was used to characterize the system performance as the distance between the pair of coils was changed. When the distance between the transmitting and receiving coils was small, a double resonance emerged. The frequency difference between the pair resonances was inversely proportional to the distance between the coils. After the system was fully characterized, it was operated with up to 20 W of incident power. Our measurements revealed that, at weak coupling, the fraction of the incident power lost to radiation increases linearly with the distance between the coils. Finally, we were able to transmit enough power to dimly light a 60-W incandescent light bulb.
△ Less
Submitted 4 November, 2018;
originally announced December 2018.
-
Improved Single-Crystal Growth of Sr$_2$RuO$_4$
Authors:
J. S. Bobowski,
N. Kikugawa,
T. Miyoshi,
H. Suwa,
S. Yonezawa,
D. A. Sokolov,
A. P. Mackenzie,
Y. Maeno
Abstract:
High-quality single crystals are essentially needed for the investigation of the novel bulk properties of unconventional superconductors. The availability of such crystals grown by the floating-zone method has helped to unveil the unconventional superconductivity of the layered perovskite Sr$_2$RuO$_4$, which is considered as a strong candidate of a topological spin-triplet superconductor. Yet, re…
▽ More
High-quality single crystals are essentially needed for the investigation of the novel bulk properties of unconventional superconductors. The availability of such crystals grown by the floating-zone method has helped to unveil the unconventional superconductivity of the layered perovskite Sr$_2$RuO$_4$, which is considered as a strong candidate of a topological spin-triplet superconductor. Yet, recent progress of investigations urges further efforts to obtain ultimately high-quality crystalline samples. In this paper, we focus on the method of preparation of feed rods for the floating-zone melting and report on the improvements of the crystal growth. We present details of the improved methods used to obtain crystals with superconducting transition temperatures $T_\mathrm{c}$ that are consistently as high as 1.4 K, as well as the properties of these crystals.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
Design and characterization of a novel toroidal split-ring resonator
Authors:
J. S. Bobowski,
Hiroko Nakahara
Abstract:
The design and characterization of a novel toroidal split-ring resonator (SRR) is described in detail. In conventional cylindrical SRRs, there is a large magnetic flux within the bore of the resonator. However, there also exists a non-negligible magnetic flux in the free space surrounding the resonator. The energy losses associated with this radiated power diminish the resonator's quality factor.…
▽ More
The design and characterization of a novel toroidal split-ring resonator (SRR) is described in detail. In conventional cylindrical SRRs, there is a large magnetic flux within the bore of the resonator. However, there also exists a non-negligible magnetic flux in the free space surrounding the resonator. The energy losses associated with this radiated power diminish the resonator's quality factor. In the toroidal SRR, on the other hand, the magnetic field lines are strongly confined within the bore of the resonator resulting in high intrinsic quality factors and stable resonance frequencies without requiring additional electromagnetic shielding. This paper describes the design and construction of a toroidal SRR as well as an experimental investigation of its cw response in the frequency-domain and its time-domain response to an rf pulse. Additionally, the dependence of the toroidal SRR's resonant frequency and quality factor on the strength of inductive coupling to external circuits is investigated both theoretically and experimentally.
△ Less
Submitted 4 November, 2018;
originally announced November 2018.
-
Using split-ring resonators to measure the electromagnetic properties of materials: An experiment for senior physics undergraduates
Authors:
J. S. Bobowski
Abstract:
A spilt-ring resonator experiment suitable for senior physics undergraduates is described and demonstrated in detail. The apparatus consists of a conducting hollow cylinder with a narrow slit along its length and can be accurately modelled as a series $LRC$ circuit. The resonance frequency and quality factor of the split-ring resonator are measured when the apparatus is suspended in air, submerged…
▽ More
A spilt-ring resonator experiment suitable for senior physics undergraduates is described and demonstrated in detail. The apparatus consists of a conducting hollow cylinder with a narrow slit along its length and can be accurately modelled as a series $LRC$ circuit. The resonance frequency and quality factor of the split-ring resonator are measured when the apparatus is suspended in air, submerged in water, and submerged in an aqueous solution of various concentrations of NaCl. The experimental results are used to extract the dielectric constant of water and to investigate the dependence of the resonator quality factor on the conductivity of the NaCl solution. The apparatus provides opportunities to experimentally examine radiative losses, complex permittivity, the electromagnetic skin depth, and cutoff frequencies of rf propagation in cylindrical waveguides, which are all concepts introduced in an undergraduate course in electrodynamics. To connect with current research, the use of split-ring resonators as a tool to precisely measure the electromagnetic properties of materials is emphasized
△ Less
Submitted 4 November, 2018;
originally announced November 2018.
-
Ferromagnetic resonance in the complex permeability of an Fe$_3$O$_4$ nanosuspension at radio and microwave frequencies
Authors:
J. Dubreuil,
J. S. Bobowski
Abstract:
The complex permeability of an iron-oxide nanosuspension has been measured as a function of magnetic field strength at RF and microwave frequencies using a loop-gap resonator. The particles were suspended in water and had an 8-nm diameter Fe$_3$O$_4$ core that was coated by Dextran. The real part of the permeability increased sharply beyond a frequency-dependent threshold value of the static magne…
▽ More
The complex permeability of an iron-oxide nanosuspension has been measured as a function of magnetic field strength at RF and microwave frequencies using a loop-gap resonator. The particles were suspended in water and had an 8-nm diameter Fe$_3$O$_4$ core that was coated by Dextran. The real part of the permeability increased sharply beyond a frequency-dependent threshold value of the static magnetic field before saturating. Just beyond this threshold field, there was a peak in the imaginary part of the permeability. The permeability measurements, which exhibited features associated with ferromagnetic resonance, were used to determine the dependence of the microwave absorption on static magnetic field strength. Using the absorption data, the $g$-factor of the nanosuspension was found to be $1.86\pm 0.07$.
△ Less
Submitted 3 November, 2018;
originally announced November 2018.
-
Probing Split-Ring Resonator Permeabilities with Loop-Gap Resonators
Authors:
Jake S. Bobowski
Abstract:
A method is proposed to experimentally determine the effective complex permeability of split-ring resonator (SRR) arrays used in the design of metamaterials at microwave frequencies. We analyze the microwave response of a loop-gap resonator (LGR) whose bore has been partially loaded with one or more SRRs. Our analysis reveals that the resonance frequency, magnetic plasma frequency, and damping con…
▽ More
A method is proposed to experimentally determine the effective complex permeability of split-ring resonator (SRR) arrays used in the design of metamaterials at microwave frequencies. We analyze the microwave response of a loop-gap resonator (LGR) whose bore has been partially loaded with one or more SRRs. Our analysis reveals that the resonance frequency, magnetic plasma frequency, and damping constant of the effective permeability of the SRR array can be extracted from fits to the reflection coefficient (S11) of an inductively-coupled LGR. We propose LGR designs that would allow both a one-dimensional array of SRRs and small three-dimensional arrays of SRRs to be characterized. Finally, we demonstrate the method using a toroidal LGR loaded with a single extended SRR of length z.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Precision Microwave Electrodynamic Measurements of K- and Co-doped BaFe$_2$As$_2$
Authors:
J. S. Bobowski,
J. C. Baglo,
James Day,
P. Dosanjh,
Rinat Ofer,
B. J. Ramshaw,
Ruixing Liang,
D. A. Bonn,
W. N. Hardy,
Huiqian Luo,
Zhao-Sheng Wang,
Lei Fang,
Hai-Hu Wen
Abstract:
We have studied the microwave electrodynamics of single crystal iron-based superconductors Ba$_{0.72}$K$_{0.28}$Fe$_2$As$_2$ (hole-doped, $T_\mathrm{c}$ $\approx $30 K) and Ba(Fe$_{0.95}$Co$_{0.05}$)$_2$As$_2$ (electron-doped, $T_\mathrm{c}$ $\approx$20 K), by cavity perturbation and broadband spectroscopy. SQUID magnetometry was used to confirm the quality and homogeneity of the samples under stu…
▽ More
We have studied the microwave electrodynamics of single crystal iron-based superconductors Ba$_{0.72}$K$_{0.28}$Fe$_2$As$_2$ (hole-doped, $T_\mathrm{c}$ $\approx $30 K) and Ba(Fe$_{0.95}$Co$_{0.05}$)$_2$As$_2$ (electron-doped, $T_\mathrm{c}$ $\approx$20 K), by cavity perturbation and broadband spectroscopy. SQUID magnetometry was used to confirm the quality and homogeneity of the samples under study. Through cavity perturbation techniques, the temperature dependence of the in-plane London penetration depth $Δλ(T)$, and therefore the superfluid phase stiffness $λ^2(0)/λ^2(T)$ was measured. Down to 0.4 K, the data do not show the exponential saturation at low temperatures expected from a singly-, fully-gapped superconductor. Rather, both the electron- and the hole-doped systems seem to be best described by a power law behavior, with $λ^2(0)/λ^2(T)$ $\sim$ $T^n$ and \emph{n} $\approx$ 2.5. In the three samples we studied, a weak feature near the sensitivity limit of our measurements appears near $T/T_\mathrm{c}$ =~0.04, hinting at a corresponding low energy feature in the superconducting density of states. The data can also be relatively well-described by a simple two-gap s-wave model of the order parameter, but this yields parameters which seem unrealistic and dependent on the fit range. Broadband surface resistance measurements reveal a sample dependent residual loss whose origin is unclear. The data from the \FeAs samples can be made to scale as $ω^2$ if the extrinsic loss is treated as an additive component, indicating large scattering rates. Finally, the temperature dependence of the surface resistance at 13 GHz obeys a power law very similar to those observed for $Δλ(T)$.
△ Less
Submitted 22 September, 2010; v1 submitted 20 September, 2010;
originally announced September 2010.
-
Stability of nodal quasiparticles in underdoped YBa2Cu3O6+y probed by penetration depth and microwave spectroscopy
Authors:
W. A. Huttema,
J. S. Bobowski,
P. J. Turner,
Ruixing Liang,
W. N. Hardy,
D. A. Bonn,
D. M. Broun
Abstract:
High resolution measurements of superfluid density and broadband quasiparticle conductivity have been used to probe the low energy excitation spectrum of nodal quasiparticles in underdoped YBCO. Penetration depth is measured to temperatures as low as 0.05 K. Microwave conductivity is measured from 0.1 to 20 GHz and is a direct probe of zero-energy quasiparticles. The data are compared with predi…
▽ More
High resolution measurements of superfluid density and broadband quasiparticle conductivity have been used to probe the low energy excitation spectrum of nodal quasiparticles in underdoped YBCO. Penetration depth is measured to temperatures as low as 0.05 K. Microwave conductivity is measured from 0.1 to 20 GHz and is a direct probe of zero-energy quasiparticles. The data are compared with predictions for a number of theoretical scenarios that compete with or otherwise modify pure d-wave superconductivity, in particular commensurate and incommensurate spin and charge density waves; d + i s and d + i d superconductivity; circulating current phases; and the BCS--BEC crossover. We conclude that the data are consistent with a pure d-wave state in the presence of a small amount of strong scattering disorder, and are able to rule out most candidate competing states either completely, or to a level set by the energy scale of the disorder, ~ 4 K. Commensurate spin and charge density orders, however, are not expected to alter the nodal spectrum and therefore cannot be excluded.
△ Less
Submitted 17 October, 2008;
originally announced October 2008.
-
Oxygen Chain Disorder as the Weak Scattering Source in YBa$_2$Cu$_3$O$_{6.50}$
Authors:
J. S. Bobowski,
P. J. Turner,
R. Harris,
Ruixing Liang,
D. A. Bonn,
W. N. Hardy
Abstract:
The microwave conductivity of an ultra-pure single crystal of YBa$_2$Cu$_3$O$_{6.50}$ has been measured deep in the superconducting state as a continuous function of frequency from $0.5\to20$ GHz. Conductivity spectra were first measured at four temperatures below 10 K after having prepared the crystal in the so called ortho-II phase in which the CuO chain oxygen are ordered into alternating ful…
▽ More
The microwave conductivity of an ultra-pure single crystal of YBa$_2$Cu$_3$O$_{6.50}$ has been measured deep in the superconducting state as a continuous function of frequency from $0.5\to20$ GHz. Conductivity spectra were first measured at four temperatures below 10 K after having prepared the crystal in the so called ortho-II phase in which the CuO chain oxygen are ordered into alternating full and empty chains. These spectra exhibit features expected for quasiparticle scattering from dilute weak impurities (small scattering phaseshift) in an otherwise clean d-wave superconductor. The measurements were repeated on the same crystal after heating and then rapidly quenching the sample to reduce the degree of oxygen order in the CuO chains. With the increased disorder, the conductivity spectra retain the distinctive weak-limit scattering features, but have increased widths reflecting an increase in quasiparticle scattering. These measurements unambiguously establish that CuO chain oxygen disorder is the dominant source of in-plane quasiparticle scattering in high purity YBCO.
△ Less
Submitted 13 December, 2006;
originally announced December 2006.
-
Phenomenology of a-axis and b-axis charge dynamics from microwave spectroscopy of highly ordered YBa2Cu3O6.50 and YBa2Cu3O6.993
Authors:
R. Harris,
P. J. Turner,
Saeid Kamal,
A. R. Hosseini,
P. Dosanjh,
G. K. Mullins,
J. S. Bobowski,
C. P. Bidinosti,
D. M. Broun,
Ruixing Liang,
W. N. Hardy,
D. A. Bonn
Abstract:
Extensive measurements of the microwave conductivity of highly pure and oxygen-ordered \YBCO single crystals have been performed as a means of exploring the intrinsic charge dynamics of a d-wave superconductor. Broadband and fixed-frequency microwave apparatus together provide a very clear picture of the electrodynamics of the superconducting condensate and its thermally excited nodal quasiparti…
▽ More
Extensive measurements of the microwave conductivity of highly pure and oxygen-ordered \YBCO single crystals have been performed as a means of exploring the intrinsic charge dynamics of a d-wave superconductor. Broadband and fixed-frequency microwave apparatus together provide a very clear picture of the electrodynamics of the superconducting condensate and its thermally excited nodal quasiparticles. The measurements reveal the existence of very long-lived excitations deep in the superconducting state, as evidenced by sharp cusp-like conductivity spectra with widths that fall well within our experimental bandwidth. We present a phenomenological model of the microwave conductivity that captures the physics of energy-dependent quasiparticle dynamics in a d-wave superconductor which, in turn, allows us to examine the scattering rate and oscillator strength of the thermally excited quasiparticles as functions of temperature. Our results are in close agreement with the Ferrell-Glover-Tinkham sum rule, giving confidence in both our experiments and the phenomenological model. Separate experiments for currents along the $\hat a$ and $\hat b$ directions of detwinned crystals allow us to isolate the role of the CuO chain layers in \YBCO, and a model is presented that incorporates both one-dimensional conduction from the chain electrons and two-dimensional transport associated with the \cuplane plane layers.
△ Less
Submitted 17 May, 2006;
originally announced May 2006.
-
Absolute values of the London penetration depth in YBa2Cu3O6+y measured by zero field ESR spectroscopy on Gd doped single crystals
Authors:
T. Pereg-Barnea,
P. J. Turner,
R. Harris,
G. K. Mullins,
J. S. Bobowski,
M. Raudsepp,
Ruixing Liang,
D. A. Bonn,
W. N. Hardy
Abstract:
Zero-field electron spin resonance (ESR) of dilute Gd ions substituted for Y in the cuprate superconductor YBa$_2$Cu$_3$O$_{\rm 6+y}$ is used as a novel technique for measuring the absolute value of the low temperature magnetic penetration depth $λ(T\to 0)$. The Gd ESR spectrum of samples with $\approx 1%$ substitution was obtained with a broadband microwave technique that measures power absorpt…
▽ More
Zero-field electron spin resonance (ESR) of dilute Gd ions substituted for Y in the cuprate superconductor YBa$_2$Cu$_3$O$_{\rm 6+y}$ is used as a novel technique for measuring the absolute value of the low temperature magnetic penetration depth $λ(T\to 0)$. The Gd ESR spectrum of samples with $\approx 1%$ substitution was obtained with a broadband microwave technique that measures power absorption bolometrically from 0.5 GHz to 21 GHz. This ESR spectrum is determined by the crystal field that lifts the level degeneracy of the spin 7/2 Gd$^{3+}$ ion and details of this spectrum provide information concerning oxygen ordering in the samples. The magnetic penetration depth is obtained by relating the number of Gd ions exposed to the microwave magnetic field to the frequency-integrated intensity of the observed ESR transitions. This technique has allowed us to determine precise values of $λ$ for screening currents flowing in the three crystallographic orientations ($\hat a$, $\hat b$ and $\hat c$) in samples of Gd$_{\rm x}$Y$_{\rm 1-x}$Ba$_2$Cu$_3$O$_{6+{\rm y}}$ of three different oxygen contents ${\rm y}=0.993$ ($T_c = 89$ K), ${\rm y}=0.77$ ($T_c=75$ K) and ${\rm y}=0.52$ ($T_c=56$ K). The in-plane values are found to depart substantially from the widely reported relation $T_c\propto 1/λ^2$.
△ Less
Submitted 26 February, 2004; v1 submitted 24 November, 2003;
originally announced November 2003.
-
Bolometric technique for high-resolution broadband microwave spectroscopy of ultra-low-loss samples
Authors:
P. J. Turner,
D. M. Broun,
Saeid Kamal,
M. E. Hayden,
J. S. Bobowski,
R. Harris,
D. C. Morgan,
J. S. Preston,
D. A. Bonn,
W. N. Hardy
Abstract:
A novel low temperature bolometric method has been devised and implemented for high-precision measurements of the microwave surface resistance of small single-crystal platelet samples having very low absorption, as a continuous function of frequency. The key to the success of this non-resonant method is the in-situ use of a normal metal reference sample that calibrates the absolute rf field stre…
▽ More
A novel low temperature bolometric method has been devised and implemented for high-precision measurements of the microwave surface resistance of small single-crystal platelet samples having very low absorption, as a continuous function of frequency. The key to the success of this non-resonant method is the in-situ use of a normal metal reference sample that calibrates the absolute rf field strength. The sample temperature can be controlled independently of the 1.2 K liquid helium bath, allowing for measurements of the temperature evolution of the absorption. However, the instrument's sensitivity decreases at higher temperatures, placing a limit on the useful temperature range. Using this method, the minimum detectable power at 1.3 K is 1.5 pW, corresponding to a surface resistance sensitivity of $\approx$1 $μΩ$ for a typical 1 mm$\times$1 mm platelet sample.
△ Less
Submitted 15 July, 2003;
originally announced July 2003.
