-
6G communications through sub-Terahertz CMOS power amplifiers: Design challenges and trends
Authors:
Jun Yan Lee,
Duo Wu,
Xuanrui Guo,
Jian Ding Tan,
Teh Jia Yew,
Zi Neng Ng,
Mohammad Arif Sobhan Bhuiyan,
Mahdi H. Miraz
Abstract:
The fifth-generation (5G) network faces limitations in supporting emerging applications, such as artificial intelligence (AI), virtual reality (VR) and digital twins. To overcome these confines, sub-Terahertz (sub-THz) and Terahertz (THz) technologies are considered to be key enablers of effective 6G wireless communications, offering higher transmission speeds, longer range and wider bandwidth. Ac…
▽ More
The fifth-generation (5G) network faces limitations in supporting emerging applications, such as artificial intelligence (AI), virtual reality (VR) and digital twins. To overcome these confines, sub-Terahertz (sub-THz) and Terahertz (THz) technologies are considered to be key enablers of effective 6G wireless communications, offering higher transmission speeds, longer range and wider bandwidth. Achieving these capabilities requires careful engineering of 6G transceivers, with a focus on efficient power amplifiers (PAs) in the front-end, which play a critical role in effectively amplifying and transmitting signals over long distances. Complimentary metal-oxidesemiconductor (CMOS) technology-based PA in sub-THz suffers severe parasitic and limited maximum frequency, however, this has eventually been solved by different design architectures and scaling down of CMOS technology to break through the frequency limitations. In this article, we reviewed the potentials and capabilities of CMOS technology for designing 6G hardware, identified the state-of-art PA designs in the sub-THz band and then examined as well as compared the designs to identify the suitable design strategies for better performance. The circuit optimisation techniques, such as coupled-line, passive gain boosting method, zero-degree power splitting, load-pull matching, diode and capacitor linearisation for better gain, saturated output power and power added efficiency, are considered for the PA design architectures at different sub-THz bands. Furthermore, these methods are summarised and discussed with their advantages and disadvantages in lieu with their performances. The PA design trends, challenges and future perspectives are also presented and discussed. Therefore, this comprehensive review article will serve as a comparative study and reference for future PA designs for radio frequency integrated circuits (RFIC).
△ Less
Submitted 19 May, 2025;
originally announced May 2025.
-
Low latency FPGA implementation of twisted Edward curve cryptography hardware accelerator over prime field
Authors:
Md Rownak Hossain,
Md Sazedur Rahman,
Kh Shahriya Zaman,
Walid El Fezzani,
Mohammad Arif Sobhan Bhuiyan,
Chia Chao Kang,
Teh Jia Yew,
Mahdi H. Miraz
Abstract:
The performance of any elliptic curve cryptography hardware accelerator significantly relies on the efficiency of the underlying point multiplication (PM) architecture. This article presents a hardware implementation of field-programmable gate array (FPGA) based modular arithmetic, group operation, and point multiplication unit on the twisted Edwards curve (Edwards25519) over the 256-bit prime fie…
▽ More
The performance of any elliptic curve cryptography hardware accelerator significantly relies on the efficiency of the underlying point multiplication (PM) architecture. This article presents a hardware implementation of field-programmable gate array (FPGA) based modular arithmetic, group operation, and point multiplication unit on the twisted Edwards curve (Edwards25519) over the 256-bit prime field. An original hardware architecture of a unified point operation module in projective coordinates that executes point addition and point doubling within a single module has been developed, taking only 646 clock cycles and ensuring a better security level than conventional approaches. The proposed point multiplication module consumes 1.4 ms time, operating at a maximal clock frequency of 117.8 MHz utilising 164,730 clock cycles having 183.38 kbps throughput on the Xilinx Virtex-5 FPGA platform for 256-bit length of key. The comparative assessment of latency and throughput across various related recent works indicates the effectiveness of our proposed PM architecture. Finally, this high throughput and low latency PM architecture will be a good candidate for rapid data encryption in high-speed wireless communication networks.
△ Less
Submitted 30 April, 2025;
originally announced April 2025.
-
Optimised Design of a Current Mirror in 150 nm GaAs Technology
Authors:
Lua Ying Qian,
Chia Chao Kang,
Tan Jian Ding,
Mohammad Arif Sobhan Bhuiyan,
Khairun Nisa Minhad,
Mahdi H. Miraz
Abstract:
The Current Mirror (CM) is a basic building block commonly used in analogue and mixed-signal integrated circuits. Its significance lies in its ability to replicate and precisely regulate the current, making it crucial in various applications such as amplifiers, filters and data converters. Recently, there has been a growing need for smaller and more energy-efficient Radio Frequency (RF) devices du…
▽ More
The Current Mirror (CM) is a basic building block commonly used in analogue and mixed-signal integrated circuits. Its significance lies in its ability to replicate and precisely regulate the current, making it crucial in various applications such as amplifiers, filters and data converters. Recently, there has been a growing need for smaller and more energy-efficient Radio Frequency (RF) devices due to the advancements in wireless communication, the Internet of Things (IoT) and portable electronics. This research aims to propose an improved and optimised CM design focusing on compactness and energy-efficient operation. Through a comprehensive methodology involving transistor sizing, biasing techniques, load resistance selection, frequency response stabilisation and noise analysis, the proposed high swing CM design achieves a gain of at least 6.005 dB, a reduced power consumption of 91.17 mW, a wide bandwidth of 22.60 kHz and improved linearity as well as accuracy through precise current matching and minimised mismatch. This optimised CM design will further boost the realisation of compact and lower power RF devices, contributing to the advancement of analogue circuit design techniques and enhancing system performance, accuracy and reliability.
△ Less
Submitted 20 February, 2025;
originally announced February 2025.
-
Design of a W-band High-PAE Class A&AB Power Amplifier in 150nm GaAs Technology
Authors:
Jun Yan Leea,
Duo Wu,
Xuanrui Guoc,
Mohammad Mahdi Ariannejad,
Mohammad Arif Sobhan Bhuiyan,
Mahdi H. Miraz
Abstract:
Nanometer scale power amplifiers (PA) at sub-THz suffer from severe parasitic effects that lead to experience limited maximum frequency and reduced power performance at the device transceiver front end. The integrated circuits researchers proposed different PA design architecture combinations at scaled down technologies to overcome these limitations. Although the designs meet the minimum requireme…
▽ More
Nanometer scale power amplifiers (PA) at sub-THz suffer from severe parasitic effects that lead to experience limited maximum frequency and reduced power performance at the device transceiver front end. The integrated circuits researchers proposed different PA design architecture combinations at scaled down technologies to overcome these limitations. Although the designs meet the minimum requirements, the power added efficiency (PAE) of PA is still quite low. In this paper, a W-band single-ended common-source (CS) and cascode integrated 3-stage 2-way PA design is proposed. The design integrated different key design methodologies to mitigate the parasitic; such as combined Class AB and Class A stages for gain-boosting and efficiency enhancement, Wilkinson power combiner for higher output power, linearity, and bandwidth, and transmission line (TL)-based wide band matching network for better inter-stage matching and compact size. The proposed PA design is validated using UMS 150-nm GaAs pHEMT using advanced design system (ADS) simulator. The results show that the proposed PA achieved a gain of 20.1 dB, an output power of 17.2 dBm, a PAE of 33 % and a 21 GHz bandwidth at 90 GHz Sub-THz band. The PA layout consumes only 5.66 X 2.51 mm2 die space including pads. Our proposed PA design will boost the research on sub-THz integrated circuits research and will smooth the wide spread adoption of 6G in near future.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Optimisation and Performance Computation of a Phase Frequency Detector Module for IoT Devices
Authors:
Md. Shahriar Khan Hemel,
Mamun Bin Ibne Reaz,
Sawal Hamid Bin Md Ali,
Mohammad Arif Sobhan Bhuiyan,
Mahdi H. Miraz
Abstract:
The Internet of Things (IoT) is pivotal in transforming the way we live and interact with our surroundings. To cope with the advancement in technologies, it is vital to acquire accuracy with the speed. A phase frequency detector (PFD) is a critical device to regulate and provide accurate frequency in IoT devices. Designing a PFD poses challenges in achieving precise phase detection, minimising dea…
▽ More
The Internet of Things (IoT) is pivotal in transforming the way we live and interact with our surroundings. To cope with the advancement in technologies, it is vital to acquire accuracy with the speed. A phase frequency detector (PFD) is a critical device to regulate and provide accurate frequency in IoT devices. Designing a PFD poses challenges in achieving precise phase detection, minimising dead zones, optimising power consumption, and ensuring robust performance across various operational frequencies, necessitating complex engineering and innovative solutions. This study delves into optimising a PFD circuit, designed using 90 nm standard CMOS technology, aiming to achieve superior operational frequencies. An efficient and high-frequency PFD design is crafted and analysed using cadence virtuoso. The study focused on investigating the impact of optimising PFD design. With the optimised PFD, an operational frequency of 5 GHz has been achieved, along with a power consumption of only 29 μW. The dead zone of the PFD was only 25 ps.
△ Less
Submitted 6 January, 2024;
originally announced January 2024.
-
Evaluating Performance of Machine Learning Models for Diabetic Sensorimotor Polyneuropathy Severity Classification using Biomechanical Signals during Gait
Authors:
Fahmida Haque,
Mamun Bin Ibne Reaz,
Muhammad Enamul Hoque Chowdhury,
Serkan Kiranyaz,
Mohamed Abdelmoniem,
Emadeddin Hussein,
Mohammed Shaat,
Sawal Hamid Md Ali,
Ahmad Ashrif A Bakar,
Geetika Srivastava,
Mohammad Arif Sobhan Bhuiyan,
Mohd Hadri Hafiz Mokhtar,
Edi Kurniawan
Abstract:
Diabetic sensorimotor polyneuropathy (DSPN) is one of the prevalent forms of neuropathy affected by diabetic patients that involves alterations in biomechanical changes in human gait. In literature, for the last 50 years, researchers are trying to observe the biomechanical changes due to DSPN by studying muscle electromyography (EMG), and ground reaction forces (GRF). However, the literature is co…
▽ More
Diabetic sensorimotor polyneuropathy (DSPN) is one of the prevalent forms of neuropathy affected by diabetic patients that involves alterations in biomechanical changes in human gait. In literature, for the last 50 years, researchers are trying to observe the biomechanical changes due to DSPN by studying muscle electromyography (EMG), and ground reaction forces (GRF). However, the literature is contradictory. In such a scenario, we are proposing to use Machine learning techniques to identify DSPN patients by using EMG, and GRF data. We have collected a dataset consists of three lower limb muscles EMG (tibialis anterior (TA), vastus lateralis (VL), gastrocnemius medialis (GM) and 3-dimensional GRF components (GRFx, GRFy, and GRFz). Raw EMG and GRF signals were preprocessed, and a newly proposed feature extraction technique scheme from literature was applied to extract the best features from the signals. The extracted feature list was ranked using Relief feature ranking techniques, and highly correlated features were removed. We have trained different ML models to find out the best-performing model and optimized that model. We trained the optimized ML models for different combinations of muscles and GRF components features, and the performance matrix was evaluated. This study has found ensemble classifier model was performing in identifying DSPN Severity, and we optimized it before training. For EMG analysis, we have found the best accuracy of 92.89% using the Top 14 features for features from GL, VL and TA muscles combined. In the GRF analysis, the model showed 94.78% accuracy by using the Top 15 features for the feature combinations extracted from GRFx, GRFy and GRFz signals. The performance of ML-based DSPN severity classification models, improved significantly, indicating their reliability in DSPN severity classification, for biomechanical data.
△ Less
Submitted 21 May, 2022;
originally announced May 2022.
-
Myoelectric Pattern Recognition Performance Enhancement Using Nonlinear Features
Authors:
Md. Johirul Islam,
Shamim Ahmad,
Fahmida Haque,
Mamun Bin Ibne Reaz,
Mohammad A. S. Bhuiyan,
Md. Rezaul Islam
Abstract:
The multichannel electrode array used for electromyogram (EMG) pattern recognition provides good performance, but it has a high cost, is computationally expensive, and is inconvenient to wear. Therefore, researchers try to use as few channels as possible while maintaining improved pattern recognition performance. However, minimizing the number of channels affects the performance due to the least s…
▽ More
The multichannel electrode array used for electromyogram (EMG) pattern recognition provides good performance, but it has a high cost, is computationally expensive, and is inconvenient to wear. Therefore, researchers try to use as few channels as possible while maintaining improved pattern recognition performance. However, minimizing the number of channels affects the performance due to the least separable margin among the movements possessing weak signal strengths. To meet these challenges, two time-domain features based on nonlinear scaling, the log of the mean absolute value (LMAV) and the nonlinear scaled value (NSV), are proposed. In this study, we validate the proposed features on two datasets, existing four feature extraction methods, variable window size and various signal to noise ratios (SNR). In addition, we also propose a feature extraction method where the LMAV and NSV are grouped with the existing 11 time-domain features. The proposed feature extraction method enhances accuracy, sensitivity, specificity, precision, and F1 score by 1.00%, 5.01%, 0.55%, 4.71%, and 5.06% for dataset 1, and 1.18%, 5.90%, 0.66%, 5.63%, and 6.04% for dataset 2, respectively. Therefore, the experimental results strongly suggest the proposed feature extraction method, for taking a step forward with regard to improved myoelectric pattern recognition performance.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Subgrid-scale energy transfer and associated coherent structures in turbulent flow over a forest-like canopy
Authors:
Md. Abdus Samad Bhuiyan,
Jahrul M Alam
Abstract:
Large eddy simulation allows to incorporate the important driving physics of turbulent flow through forest- or vegetation-like canopies. In this paper we investigate the effects of vortex stretching and coherent structures on the subgrid-scale (SGS) turbulence kinetic energy (TKE). We present three simulations (SGS-d/s/w) of turbulence-canopy interactions. SGS-d assumes a local, dynamic balance of…
▽ More
Large eddy simulation allows to incorporate the important driving physics of turbulent flow through forest- or vegetation-like canopies. In this paper we investigate the effects of vortex stretching and coherent structures on the subgrid-scale (SGS) turbulence kinetic energy (TKE). We present three simulations (SGS-d/s/w) of turbulence-canopy interactions. SGS-d assumes a local, dynamic balance of SGS production with SGS dissipation. SGS-s averages the SGS contributions of coherent structures over Lagrangian pathlines. SGS-w assumes that an average cascade of TKE from large- to small-scales occurs through the process of vortex stretching. We compare the consequences of considering a forest of the same morphology as immersed solids or an immersed canopy. Our results show clear differences in the characteristics of flow and turbulence, while both the cases exhibit canopy mixing layers. The results also show that the consideration of vortex stretching resolves about $18$% more TKE with respect to classical Deardorff's TKE model. These observations indicate that the aerodynamic response of the forest canopy is linked to the morphology of the forest cover. Sweep- and ejection-events of the spatially intermittent coherent structures in forests as well as their role in transporting momentum, energy, and scalars are discussed.
△ Less
Submitted 3 October, 2020;
originally announced October 2020.
