-
Dynamical Sweet and Sour Regions in Bichromatically Driven Floquet Qubits
Authors:
D. Dominic Briseño-Colunga,
Bibek Bhandari,
Debmalya Das,
Long B. Nguyen,
Yosep Kim,
David I. Santiago,
Irfan Siddiqi,
Andrew N. Jordan,
Justin Dressel
Abstract:
Modern superconducting and semiconducting quantum hardware use external charge and microwave flux drives to both tune and operate devices. However, each external drive is susceptible to low-frequency (e.g., $1/f$) noise that can drastically reduce the decoherence lifetime of the device unless the drive is placed at specific operating points that minimize the sensitivity to fluctuations. We show th…
▽ More
Modern superconducting and semiconducting quantum hardware use external charge and microwave flux drives to both tune and operate devices. However, each external drive is susceptible to low-frequency (e.g., $1/f$) noise that can drastically reduce the decoherence lifetime of the device unless the drive is placed at specific operating points that minimize the sensitivity to fluctuations. We show that operating a qubit in a driven frame using two periodic drives of distinct commensurate frequencies can have advantages over both monochromatically driven frames and static frames with constant offset drives. Employing Floquet theory, we analyze the spectral and lifetime characteristics of a two-level system under weak and strong bichromatic drives, identifying drive-parameter regions with high coherence (sweet spots) and highlighting regions where coherence is limited by additional sensitivity to noise at the drive frequencies (sour spots). We present analytical expressions for quasienergy gaps and dephasing rates, demonstrating that bichromatic driving can alleviate the trade-off between DC and AC noise robustness observed in monochromatic drives. This approach reveals continuous manifolds of doubly dynamical sweet spots, along which drive parameters can be varied without compromising coherence. Our results motivate further study of bichromatic Floquet engineering as a powerful strategy for maintaining tunability in high-coherence quantum systems.
△ Less
Submitted 28 May, 2025;
originally announced May 2025.
-
Capturing an Electron in the Virtual State
Authors:
Alok Nath Singh,
Bibek Bhandari,
Rafael Sánchez,
Andrew N. Jordan
Abstract:
We address a foundational question in quantum mechanics: can a particle be directly found in a classically forbidden virtual state? We instantiate this conceptual question by investigating the traversal of electrons through a tunnel barrier, which we define in a triple quantum dot (TQD) system where the occupation of the central dot is energetically avoided. The motivation behind this setup is to…
▽ More
We address a foundational question in quantum mechanics: can a particle be directly found in a classically forbidden virtual state? We instantiate this conceptual question by investigating the traversal of electrons through a tunnel barrier, which we define in a triple quantum dot (TQD) system where the occupation of the central dot is energetically avoided. The motivation behind this setup is to answer whether the central dot is occupied or not during a virtual transition when it is being explicitly monitored. We investigate this problem in two different limits of continuous measurements: the stochastic quantum diffusion and the quantum jump. We find that, even though individual trajectories differ considerably across these limits, measuring leads to a higher occupation in the central dot on average. Our results demonstrate that the act of observation fundamentally reshapes tunneling dynamics, resolving the seeming paradox of detecting a particle in a classically forbidden region: weak measurements partially localize the particle, while strong measurements enforce a discontinuous either/or detection or no detection outcome.
△ Less
Submitted 13 March, 2025;
originally announced March 2025.
-
Kerr-cat Qubit Operations Below the Fault-tolerant Threshold
Authors:
Bingcheng Qing,
Ahmed Hajr,
Ke Wang,
Gerwin Koolstra,
Long B. Nguyen,
Jordan Hines,
Irwin Huang,
Bibek Bhandari,
Zahra Padramrazi,
Larry Chen,
Ziqi Kang,
Christian Jünger,
Noah Goss,
Nikitha Jain,
Hyunseong Kim,
Kan-Heng Lee,
Akel Hashim,
Nicholas E. Frattini,
Justin Dressel,
Andrew N. Jordan,
David I. Santiago,
Irfan Siddiqi
Abstract:
The ubiquitous noise in quantum system hinders the advancement of quantum information processing and has driven the emergence of different quantum error correction protocols. Among them, quantum error correction codes tailored for noise-biased qubits exhibit comparatively high error thresholds, making them a promising platform to achieve fault-tolerance. Nevertheless, their quantum operations are…
▽ More
The ubiquitous noise in quantum system hinders the advancement of quantum information processing and has driven the emergence of different quantum error correction protocols. Among them, quantum error correction codes tailored for noise-biased qubits exhibit comparatively high error thresholds, making them a promising platform to achieve fault-tolerance. Nevertheless, their quantum operations are challenging and the demonstration of their performance beyond the fault-tolerant threshold remains incomplete. Here, we leverage Schrödinger cat states in scalable planar superconducting circuits to thoroughly characterize the high-fidelity single-qubit quantum operations on noise-biased qubits with systematic quantum tomography and benchmarking tools, demonstrating their state-of-the-art performance beyond the fault-tolerant threshold of the surface code. These results thus embody a transformative milestone in the exploration of quantum systems with structured noises. Notably, our framework is extensible to other structured-noise systems, paving the way for systematic characterization and validation of novel quantum platforms with structured noise.
△ Less
Submitted 8 April, 2025; v1 submitted 7 November, 2024;
originally announced November 2024.
-
Artificially intelligent Maxwell's demon for optimal control of open quantum systems
Authors:
Paolo Andrea Erdman,
Robert Czupryniak,
Bibek Bhandari,
Andrew N. Jordan,
Frank Noé,
Jens Eisert,
Giacomo Guarnieri
Abstract:
Feedback control of open quantum systems is of fundamental importance for practical applications in various contexts, ranging from quantum computation to quantum error correction and quantum metrology. Its use in the context of thermodynamics further enables the study of the interplay between information and energy. However, deriving optimal feedback control strategies is highly challenging, as it…
▽ More
Feedback control of open quantum systems is of fundamental importance for practical applications in various contexts, ranging from quantum computation to quantum error correction and quantum metrology. Its use in the context of thermodynamics further enables the study of the interplay between information and energy. However, deriving optimal feedback control strategies is highly challenging, as it involves the optimal control of open quantum systems, the stochastic nature of quantum measurement, and the inclusion of policies that maximize a long-term time- and trajectory-averaged goal. In this work, we employ a reinforcement learning approach to automate and capture the role of a quantum Maxwell's demon: the agent takes the literal role of discovering optimal feedback control strategies in qubit-based systems that maximize a trade-off between measurement-powered cooling and measurement efficiency. Considering weak or projective quantum measurements, we explore different regimes based on the ordering between the thermalization, the measurement, and the unitary feedback timescales, finding different and highly non-intuitive, yet interpretable, strategies. In the thermalization-dominated regime, we find strategies with elaborate finite-time thermalization protocols conditioned on measurement outcomes. In the measurement-dominated regime, we find that optimal strategies involve adaptively measuring different qubit observables reflecting the acquired information, and repeating multiple weak measurements until the quantum state is "sufficiently pure", leading to random walks in state space. Finally, we study the case when all timescales are comparable, finding new feedback control strategies that considerably outperform more intuitive ones. We discuss a two-qubit example where we explore the role of entanglement and conclude discussing the scaling of our results to quantum many-body systems.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
-
Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
H. Bae,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
S. Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev
, et al. (84 additional authors not shown)
Abstract:
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und…
▽ More
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction. This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array.
△ Less
Submitted 3 March, 2025; v1 submitted 16 July, 2024;
originally announced July 2024.
-
Improved limit on neutrinoless double beta decay of $^{100}$Mo from AMoRE-I
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate c…
▽ More
AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate crystals, at the Yangyang Underground Laboratory for over two years. The exposure was 8.02 kg$\cdot$year (or 3.89 kg$_{\mathrm{^{100}Mo}}\cdot$year) and the total background rate near the Q-value was 0.025 $\pm$ 0.002 counts/keV/kg/year. We observed no indication of $0νββ$ decay and report a new lower limit of the half-life of $^{100}$Mo $0νββ$ decay as $ T^{0ν}_{1/2}>2.9\times10^{24}~\mathrm{yr}$ at 90\% confidence level. The effective Majorana mass limit range is $m_{ββ}<$(210--610) meV using nuclear matrix elements estimated in the framework of different models, including the recent shell model calculations.
△ Less
Submitted 3 March, 2025; v1 submitted 8 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 14 October, 2024; v1 submitted 13 June, 2024;
originally announced June 2024.
-
Comparing Deep Learning Models for Rice Mapping in Bhutan Using High Resolution Satellite Imagery
Authors:
Biplov Bhandari,
Timothy Mayer
Abstract:
The Bhutanese government is increasing its utilization of technological approaches such as including Remote Sensing-based knowledge in their decision-making process. This study focuses on crop type and crop extent in Paro, one of the top rice-yielding districts in Bhutan, and employs publicly available NICFI high-resolution satellite imagery from Planet. Two Deep Learning (DL) approaches, point-ba…
▽ More
The Bhutanese government is increasing its utilization of technological approaches such as including Remote Sensing-based knowledge in their decision-making process. This study focuses on crop type and crop extent in Paro, one of the top rice-yielding districts in Bhutan, and employs publicly available NICFI high-resolution satellite imagery from Planet. Two Deep Learning (DL) approaches, point-based (DNN) and patch-based (U-Net), models were used in conjunction with cloud-computing platforms. Three different models per DL approaches (DNN and U-Net) were trained: 1) RGBN channels from Planet; 2) RGBN and elevation data (RGBNE); 3) RGBN and Sentinel-1 (S1) data (RGBNS), and RGBN with E and S1 data (RGBNES). From this comprehensive analysis, the U-Net displayed higher performance metrics across both model training and model validation efforts. Among the U-Net model sets, the RGBN, RGBNE, RGBNS, and RGBNES models had an F1-score of 0.8546, 0.8563, 0.8467, and 0.8500 respectively. An independent model evaluation was performed and found a high level of performance variation across all the metrics. For this independent model evaluation, the U-Net RGBN, RGBNE, RGBNES, and RGBN models displayed the F1-scores of 0.5935, 0.6154, 0.5882, and 0.6582, suggesting U-Net RGBNES as the best model. The study shows that the DL approaches can predict rice. Also, DL methods can be used with the survey-based approaches currently utilized by the Bhutan Department of Agriculture. Further, this study demonstrated the usage of regional land cover products such as SERVIR's RLCMS as a weak label approach to capture different strata addressing the class imbalance problem and improving the sampling design for DL application. Finally, through preliminary model testing and comparisons outlined it was shown that using additional features such as NDVI, EVI, and NDWI did not drastically improve model performance.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Gap between the number of facets of the two poset polytopes
Authors:
Binaya Bhandari,
Debra Cunningham,
Grace Morrell,
SuHo Oh,
Paxton Smith
Abstract:
We study the difference between the number of facets of the order polytope and the chain polytope of a poset. Hibi and Li classified posets where the gap is exactly zero. We describe the bounds on this gap using the new notion of crossing numbers, and then use this result to classify the posets where the gap is exactly one.
We study the difference between the number of facets of the order polytope and the chain polytope of a poset. Hibi and Li classified posets where the gap is exactly zero. We describe the bounds on this gap using the new notion of crossing numbers, and then use this result to classify the posets where the gap is exactly one.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Symmetrically Threaded SQUIDs As Next Generation Kerr-cat Qubits
Authors:
Bibek Bhandari,
Irwin Huang,
Ahmed Hajr,
Kagan Yanik,
Bingcheng Qing,
Ke Wang,
David I Santiago,
Justin Dressel,
Irfan Siddiqi,
Andrew N Jordan
Abstract:
Kerr-cat qubits are bosonic qubits with autonomous protection against bit-flips. They have been studied widely using driven Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) oscillators. We theoretically investigate an alternate circuit for the Kerr-cat qubit, namely Symmetrically Threaded SQUIDs (STS). We perform the circuit analysis and derive the Gorini-Kossakowski-Sudarshan-Lindbl…
▽ More
Kerr-cat qubits are bosonic qubits with autonomous protection against bit-flips. They have been studied widely using driven Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) oscillators. We theoretically investigate an alternate circuit for the Kerr-cat qubit, namely Symmetrically Threaded SQUIDs (STS). We perform the circuit analysis and derive the Gorini-Kossakowski-Sudarshan-Lindblad (GKLS) master equation for the Kerr-cat qubit attached to a thermal environment. We find that the lifetime time of the coherent states ($T_α$) of the Kerr-cat qubit is the same in both the STS and SNAIL circuits for weak Kerr nonlinearity. However, the STS Kerr-cat qubits have the additional benefit of being resistant against higher order photon dissipation effects, resulting in significantly longer $T_α$ even with stronger Kerr nonlinearity on the order of $10{~\rm MHz}$. We also examine the effects of strong flux driving and asymmetric Josephson junctions on $T_α$. Unlike the SNAIL design, we find a dip in $T_α$ of the STS Kerr-cat qubit for weak two-photon drive. However, we show that the dip can be mitigated by applying a suitable drive-dependent detuning. With the proposed design and considering a cat size of 10 photons, we predict $T_α$ of the order of tens of milliseconds even in the presence of multi-photon heating and dephasing effects. The robustness of the STS Kerr-cat qubit makes it a promising component for fault-tolerant quantum processors.
△ Less
Submitted 18 May, 2024;
originally announced May 2024.
-
Giant Thermoelectric Response of Fluxons in Superconductors
Authors:
Alok Nath Singh,
Bibek Bhandari,
Alessandro Braggio,
Francesco Giazotto,
Andrew N. Jordan
Abstract:
Thermoelectric devices that operate on quantum principles have been under extensive investigation in the past decades. These devices are at the fundamental limits of miniaturized heat engines and refrigerators, advancing the field of quantum thermodynamics. Most research in this area concerns the use of conduction electrons and holes as charge and heat carriers, and only very recently have superco…
▽ More
Thermoelectric devices that operate on quantum principles have been under extensive investigation in the past decades. These devices are at the fundamental limits of miniaturized heat engines and refrigerators, advancing the field of quantum thermodynamics. Most research in this area concerns the use of conduction electrons and holes as charge and heat carriers, and only very recently have superconductors been considered as thermal engines and thermoelectric devices. Here, we investigate the thermoelectric response of an Abrikosov vortex in type-II superconductors in the deep quantum limit. We consider two thermoelectric geometries, a type-II SIN junction and a local Scanning Tunneling Microscope (STM)-tip normal metal probe over the superconductor. We exploit the strong breaking of particle-hole symmetry in bound states at sub-gap energies within the superconducting vortex to realize a giant thermoelectric response in the presence of fluxons. We predict a thermovoltage of a few mV/K at sub-Kelvin temperatures using both semi-analytic and numerical self-consistent solutions of the Bogoliubov-de Gennes equations. Relevant thermoelectric coefficients and figures of merit are found within our model, both in linear and nonlinear regimes. The ZT of the SIN junction is around 1, rising to above 3 for the STM junction centered at the vortex core. We also discuss how this system can be used as a sensitive thermocouple, diode, or localized bolometer to detect low-energy single photons.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
High-Coherence Kerr-cat qubit in 2D architecture
Authors:
Ahmed Hajr,
Bingcheng Qing,
Ke Wang,
Gerwin Koolstra,
Zahra Pedramrazi,
Ziqi Kang,
Larry Chen,
Long B. Nguyen,
Christian Junger,
Noah Goss,
Irwin Huang,
Bibek Bhandari,
Nicholas E. Frattini,
Shruti Puri,
Justin Dressel,
Andrew N. Jordan,
David Santiago,
Irfan Siddiqi
Abstract:
The Kerr-cat qubit is a bosonic qubit in which multi-photon Schrodinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions neces…
▽ More
The Kerr-cat qubit is a bosonic qubit in which multi-photon Schrodinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on-chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum non-demolition readout fidelity of 99.6% for a cat with 8 photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X(90) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to 10 photons in the oscillator achieving a bit-flip time higher than 1 ms and only a linear decrease in the phase-flip time, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint.
△ Less
Submitted 19 May, 2024; v1 submitted 25 April, 2024;
originally announced April 2024.
-
Background study of the AMoRE-pilot experiment
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (83 additional authors not shown)
Abstract:
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental conf…
▽ More
We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental configurations with the results of Monte Carlo simulations and identified the background sources in each configuration. We replaced several detector components and enhanced the neutron shielding to lower the background level between configurations. A limit on the half-life of $0νββ$ decay of $^{100}$Mo was found at $T_{1/2}^{0ν} \ge 3.0\times 10^{23}$ years at 90\% confidence level, based on the measured background and its modeling. Further reduction of the background rate in the AMoRE-I and AMoRE-II are discussed.
△ Less
Submitted 7 April, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Measurement-based quantum thermal machines with feedback control
Authors:
Bibek Bhandari,
Robert Czupryniak,
Paolo Andrea Erdman,
Andrew N. Jordan
Abstract:
We investigate coupled-qubit-based thermal machines powered by quantum measurements and feedback. We consider two different versions of the machine: 1) a quantum Maxwell's demon where the coupled-qubit system is connected to a detachable single shared bath, and 2) a measurement-assisted refrigerator where the coupled-qubit system is in contant with a hot and cold bath. In the quantum Maxwell's dem…
▽ More
We investigate coupled-qubit-based thermal machines powered by quantum measurements and feedback. We consider two different versions of the machine: 1) a quantum Maxwell's demon where the coupled-qubit system is connected to a detachable single shared bath, and 2) a measurement-assisted refrigerator where the coupled-qubit system is in contant with a hot and cold bath. In the quantum Maxwell's demon case we discuss both discrete and continuous measurements. We find that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further find that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we use continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We find that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.
△ Less
Submitted 2 May, 2023; v1 submitted 2 December, 2022;
originally announced December 2022.
-
Programmable Heisenberg interactions between Floquet qubits
Authors:
Long B. Nguyen,
Yosep Kim,
Akel Hashim,
Noah Goss,
Brian Marinelli,
Bibek Bhandari,
Debmalya Das,
Ravi K. Naik,
John Mark Kreikebaum,
Andrew N. Jordan,
David I. Santiago,
Irfan Siddiqi
Abstract:
The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequenc…
▽ More
The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequency superconducting circuits into modifiable Floquet qubits, we demonstrate an XXZ Heisenberg interaction with fully adjustable anisotropy. This interaction model is on one hand the basis for many-body quantum simulation of spin systems, and on the other hand the primitive for an expressive quantum gate set. To illustrate the robustness and versatility of our Floquet protocol, we tailor the Heisenberg Hamiltonian and implement two-qubit iSWAP, CZ, and SWAP gates with estimated fidelities of 99.32(3)%, 99.72(2)%, and 98.93(5)%, respectively. In addition, we implement a Heisenberg interaction between higher energy levels and employ it to construct a three-qubit CCZ gate with a fidelity of 96.18(5)%. Importantly, the protocol is applicable to various fixed-frequency high-coherence platforms, thereby unlocking a suite of essential interactions for high-performance quantum information processing. From a broader perspective, our work provides compelling avenues for future exploration of quantum electrodynamics and optimal control using the Floquet framework.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Measurement of the Neutron Cross Section on Argon Between 95 and 720 MeV
Authors:
S. Martynenko,
B. Bhandari,
J. Bian,
K. Bilton,
C. Callahan,
J. Chaves,
H. Chen,
D. Cline,
R. L. Cooper,
D. L. Danielson,
J. Danielson,
N. Dokania,
S. Elliott,
S. Fernandes,
S. Gardiner,
G. Garvey,
V. Gehman,
F. Giuliani,
S. Glavin,
M. Gold,
C. Grant,
E. Guardincerri,
T. Haines,
A. Higuera,
J. Y. Ji
, et al. (50 additional authors not shown)
Abstract:
We report an extended measurement of the neutron cross section on argon in the energy range of 95-720 MeV. The measurement was obtained with a 4.3-hour exposure of the Mini-CAPTAIN detector to the WNR/LANSCE beam at LANL. Compared to an earlier analysis of the same data, this extended analysis includes a reassessment of systematic uncertainties, in particular related to unused wires in the upstrea…
▽ More
We report an extended measurement of the neutron cross section on argon in the energy range of 95-720 MeV. The measurement was obtained with a 4.3-hour exposure of the Mini-CAPTAIN detector to the WNR/LANSCE beam at LANL. Compared to an earlier analysis of the same data, this extended analysis includes a reassessment of systematic uncertainties, in particular related to unused wires in the upstream part of the detector. Using this information we doubled the fiducial volume in the experiment and increased the statistics by a factor of 2.4. We also shifted the analysis from energy bins to time-of-flight bins. This change reduced the overall considered energy range, but improved the understanding of the energy spectrum of incoming neutrons in each bin. Overall, the new measurements are extracted from a fit to the attenuation of the neutron flux in five time-of-flight regions: 140 ns - 180 ns, 120 ns - 140 ns, 112 ns - 120 ns, 104 ns - 112 ns, 96 ns - 104 ns. The final cross sections are given for the flux-averaged energy in each time-of-flight bin: $σ(146~\rm{MeV})=0.60^{+0.14}_{-0.14}\pm0.08$(syst) b, $σ(236~\rm{MeV})=0.72^{+0.10}_{-0.10}\pm0.04$(syst) b, $σ(319~\rm{MeV})=0.80^{+0.13}_{-0.12}\pm0.040$(syst) b, $σ(404~\rm{MeV})=0.74^{+0.14}_{-0.09}\pm0.04$(syst) b, $σ(543~\rm{MeV})=0.74^{+0.09}_{-0.09}\pm0.04$(syst) b.
△ Less
Submitted 14 March, 2023; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Thermodynamics of Quantum Measurement and the Demon's Arrow of Time
Authors:
Kagan Yanik,
Bibek Bhandari,
Sreenath K. Manikandan,
Andrew N. Jordan
Abstract:
We discuss the thermodynamic aspects of a single qubit based device, powered by weak quantum measurements, and feedback controlled by a quantum Maxwell's demon. We discuss both discrete and time-continuous operation of the measurement based device at finite temperature of the reservoir. In the discrete example where a demon acquires information via discrete weak measurements, we find that the ther…
▽ More
We discuss the thermodynamic aspects of a single qubit based device, powered by weak quantum measurements, and feedback controlled by a quantum Maxwell's demon. We discuss both discrete and time-continuous operation of the measurement based device at finite temperature of the reservoir. In the discrete example where a demon acquires information via discrete weak measurements, we find that the thermodynamic variables including the heat exchanged, extractable work, and the entropy produced are completely determined by an information theoretic measure of the demon's perceived arrow of time. We also discuss a realistic time-continuous operation of the device where the feedback is applied after a sequence of weak measurements. In the time-continuous limit, we derive the exact finite-time statistics of work, heat and entropy changes along individual quantum trajectories of the quantum measurement process, and relate them to the demon's arrow of time.
△ Less
Submitted 30 September, 2022; v1 submitted 16 May, 2022;
originally announced May 2022.
-
Continuous Measurement Boosted Adiabatic Quantum Thermal Machines
Authors:
Bibek Bhandari,
Andrew N. Jordan
Abstract:
We present a unified approach to study continuous measurement based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate def…
▽ More
We present a unified approach to study continuous measurement based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomena of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as non-linear system-bath couplings. We observe that non-linear coupling produces cooling effects in certain regime where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement based refrigerators can have similar or better coefficient of performance (COP) in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement based quantum thermal machines to refrigeration in quantum processing networks.
△ Less
Submitted 3 August, 2022; v1 submitted 7 December, 2021;
originally announced December 2021.
-
Heat rectification through single and coupled quantum dots
Authors:
Ludovico Tesser,
Bibek Bhandari,
Paolo Andrea Erdman,
Elisabetta Paladino,
Rosario Fazio,
Fabio Taddei
Abstract:
We study heat rectification through quantum dots in the Coulomb blockade regime using a master equation approach. We consider both cases of two-terminal and four-terminal devices. In the two-terminal configuration, we analyze the case of a single quantum dot with either a doubly-degenerate level or two non-degenerate levels. In the sequential tunneling regime we analyze the behaviour of heat curre…
▽ More
We study heat rectification through quantum dots in the Coulomb blockade regime using a master equation approach. We consider both cases of two-terminal and four-terminal devices. In the two-terminal configuration, we analyze the case of a single quantum dot with either a doubly-degenerate level or two non-degenerate levels. In the sequential tunneling regime we analyze the behaviour of heat currents and rectification as functions of the position of the energy levels and of the temperature bias. In particular, we derive an upper bound for rectification in the closed-circuit setup with the doubly-degenerate level. We also prove the absence of a bound for the case of two non-degenerate levels and identify the ideal system parameters to achieve nearly perfect rectification. The second part of the paper deals with the effect of second-order cotunneling contributions, including both elastic and inelastic processes. In all cases we find that there exists ranges of values of parameters (such as the levels' position) where rectification is enhanced by cotunneling. In particular, in the doubly-degenerate level case we find that cotunneling corrections can enhance rectification when they reduce the magnitude of the heat currents. For the four-terminal configuration, we analyze the non-local situation of two Coulomb-coupled quantum dots, each connected to two terminals: the temperature bias is applied to the two terminals connected to one quantum dot, while the heat currents of interest are the ones flowing in the other quantum dot. Remarkably, in this situation we find that non-local rectification can be perfect as a consequence of the fact that the heat currents vanish for properly tuned parameters.
△ Less
Submitted 1 March, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
Minimal two-body quantum absorption refrigerator
Authors:
Bibek Bhandari,
Andrew N. Jordan
Abstract:
We study the phenomenon of absorption refrigeration, where refrigeration is achieved by heating instead of work, in two different setups: a minimal set up based on coupled qubits, and two non-linearly coupled resonators. Considering ZZ interaction between the two qubits, we outline the basic ingredients required to achieve cooling. Using local as well as global master equations, we observe that in…
▽ More
We study the phenomenon of absorption refrigeration, where refrigeration is achieved by heating instead of work, in two different setups: a minimal set up based on coupled qubits, and two non-linearly coupled resonators. Considering ZZ interaction between the two qubits, we outline the basic ingredients required to achieve cooling. Using local as well as global master equations, we observe that inclusion of XX type term in the qubit-qubit coupling is detrimental to cooling. We compare the cooling effect obtained in the qubit case with that of non-linearly coupled resonators (multi-level system) where the ZZ interaction translates to a Kerr-type non-linearity. For small to intermediate strengths of non-linearity, we observe that multi-level quantum systems, for example qutrits, give better cooling effect compared to the qubits. Using Keldysh non-equilibrium Green's function formalism, we go beyond first order sequential tunneling processes and study the effect of higher order processes on refrigeration. We find reduced cooling effect compared to the master equation calculations.
△ Less
Submitted 13 August, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Thermal control across a chain of electronic nanocavities
Authors:
Étienne Jussiau,
Sreenath K. Manikandan,
Bibek Bhandari,
Andrew N. Jordan
Abstract:
We study a chain of alternating hot and cold electronic nanocavities -- connected to one another via resonant-tunneling quantum dots -- with the intent of achieving precise thermal control across the chain. This is accomplished by positioning the dots' energy levels such that a predetermined distribution of heat currents is realized across the chain in the steady state. The number of electrons in…
▽ More
We study a chain of alternating hot and cold electronic nanocavities -- connected to one another via resonant-tunneling quantum dots -- with the intent of achieving precise thermal control across the chain. This is accomplished by positioning the dots' energy levels such that a predetermined distribution of heat currents is realized across the chain in the steady state. The number of electrons in each cavity is conserved in the steady state which constrains the cavities' chemical potentials. We determine these chemical potentials analytically in the linear response regime where the energy differences between the dots' resonant levels and the neighboring chemical potentials are much smaller than the thermal energy. In this regime, the thermal control problem can be solved exactly, while, in the general case, thermal control can only be achieved in a relative sense, that is, when one only preassigns the ratios between different heat currents. We apply our results to two different cases: We first demonstrate that a "heat switch" can be easily realized with three coupled cavities, then we show that our linear response results can provide accurate results in situations with a large number of cavities.
△ Less
Submitted 5 August, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
From non-equilibrium Green's functions to quantum master equations for the density matrix and out-of-time-order correlators: steady state and adiabatic dynamics
Authors:
Bibek Bhandari,
Rosario Fazio,
Fabio Taddei,
Liliana Arrachea
Abstract:
We consider a finite quantum system under slow driving and weakly coupled to thermal reservoirs at different temperatures. We present a systematic derivation of the quantum master equation for the density matrix and the out-of-time-order correlators. We start from the microscopic Hamiltonian and we formulate the equations ruling the dynamics of these quantities by recourse to the Schwinger-Keldysh…
▽ More
We consider a finite quantum system under slow driving and weakly coupled to thermal reservoirs at different temperatures. We present a systematic derivation of the quantum master equation for the density matrix and the out-of-time-order correlators. We start from the microscopic Hamiltonian and we formulate the equations ruling the dynamics of these quantities by recourse to the Schwinger-Keldysh non-equilibrium Green's function formalism, performing a perturbative expansion in the coupling between the system and the reservoirs. We focus on the adiabatic dynamics, which corresponds to considering the linear response in the ratio between the relaxation time due to the system-reservoir coupling and the time scale associated to the driving. We calculate the particle and energy fluxes. We illustrate the formalism in the case of a qutrit coupled to bosonic reservoirs and of a pair of interacting quantum dots attached to fermionic reservoirs, also discussing the relevance of coherent effects.
△ Less
Submitted 7 March, 2021;
originally announced March 2021.
-
Thermal rectification through a nonlinear quantum resonator
Authors:
Bibek Bhandari,
Paolo Andrea Erdman,
Rosario Fazio,
Elisabetta Paladino,
Fabio Taddei
Abstract:
We present a comprehensive and systematic study of thermal rectification in a prototypical low-dimensional quantum system -- a non-linear resonator: we identify necessary conditions to observe thermal rectification and we discuss strategies to maximize it. We focus, in particular, on the case where anharmonicity is very strong and the system reduces to a qubit. In the latter case, we derive genera…
▽ More
We present a comprehensive and systematic study of thermal rectification in a prototypical low-dimensional quantum system -- a non-linear resonator: we identify necessary conditions to observe thermal rectification and we discuss strategies to maximize it. We focus, in particular, on the case where anharmonicity is very strong and the system reduces to a qubit. In the latter case, we derive general upper bounds on rectification which hold in the weak system-bath coupling regime, and we show how the Lamb shift can be exploited to enhance rectification. We then go beyond the weak-coupling regime by employing different methods: i) including co-tunneling processes, ii) using the non-equilibrium Green's function formalism and iii) using the Feynman-Vernon path integral approach. We find that the strong coupling regime allows us to violate the bounds derived in the weak-coupling regime, providing us with clear signatures of high order coherent processes visible in the thermal rectification. In the general case, where many levels participate to the system dynamics, we compare the heat rectification calculated with the equation of motion method and with a mean-field approximation. We find that the former method predicts, for a small or intermediate anharmonicity, a larger rectification coefficient.
△ Less
Submitted 4 May, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
The Mini-CAPTAIN Liquid Argon Time Projection Chamber
Authors:
CAPTAIN Collaboration,
C. E. Taylor,
B. Bhandari,
J. Bian,
K. Bilton,
C. Callahan,
J. Chaves,
H. Chen,
D. Cline,
R. L. Cooper,
D. L. Danielson,
J. Danielson,
N. Dokania,
S. Elliot,
S. Fernandes,
S. Gardiner,
G. Garvey,
V. Gehman,
F. Giuliani,
S. Glavin,
M. Gold,
C. Grant,
E. Guardincerri,
T. Haines,
A. Higuera
, et al. (51 additional authors not shown)
Abstract:
This manuscript describes the commissioning of the Mini-CAPTAIN liquid argon detector in a neutron beam at the Los Alamos Neutron Science Center (LANSCE), which led to a first measurement of high-energy neutron interactions in argon. The Mini-CAPTAIN detector consists of a Time Projection Chamber (TPC) with an accompanying photomultiplier tube (PMT) array sealed inside a liquid-argon-filled cryost…
▽ More
This manuscript describes the commissioning of the Mini-CAPTAIN liquid argon detector in a neutron beam at the Los Alamos Neutron Science Center (LANSCE), which led to a first measurement of high-energy neutron interactions in argon. The Mini-CAPTAIN detector consists of a Time Projection Chamber (TPC) with an accompanying photomultiplier tube (PMT) array sealed inside a liquid-argon-filled cryostat. The liquid argon is constantly purified and recirculated in a closed-loop cycle during operation. The specifications and assembly of the detector subsystems and an overview of their performance in a neutron beam are reported.
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Finite-size effects in cylindrical topological insulators
Authors:
Michele Governale,
Bibek Bhandari,
Fabio Taddei,
Ken-Ichiro Imura,
Ulrich Zülicke
Abstract:
We present a theoretical study of a nanowire made of a three-dimensional topological insulator. The bulk topological insulator is described by a continuum-model Hamiltonian, and the cylindrical-nanowire geometry is modelled by a hard-wall boundary condition. We provide the secular equation for the eigenergies of the systems (both for bulk and surface states) and the analytical form of the energy e…
▽ More
We present a theoretical study of a nanowire made of a three-dimensional topological insulator. The bulk topological insulator is described by a continuum-model Hamiltonian, and the cylindrical-nanowire geometry is modelled by a hard-wall boundary condition. We provide the secular equation for the eigenergies of the systems (both for bulk and surface states) and the analytical form of the energy eigenfunctions. We describe how the surface states of the cylinder are modified by finite-size effects. In particular, we provide a $1/R$ expansion for the energy of the surface states up to second order. The knowledge of the analytical form for the wavefunctions enables the computation of matrix elements of any single-particle operators. In particular, we compute the matrix elements of the optical dipole operator, which describe optical absorption and emission, treating intra- and inter-band transition on the same footing. Selection rules for optical transitions require conservation of linear momentum parallel to the nanowire axis, and a change of $0$ or $\pm 1$ in the total-angular-momentum projection parallel to the nanowire axis. The magnitude of the optical-transition matrix elements is strongly affected by the finite radius of the nanowire.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Geometric properties of adiabatic quantum thermal machines
Authors:
Bibek Bhandari,
Pablo Terrén Alonso,
Fabio Taddei,
Felix von Oppen,
Rosario Fazio,
Liliana Arrachea
Abstract:
We present a general unified approach for the study of quantum thermal machines, including both heat engines and refrigerators, operating under periodic adiabatic driving and in contact with thermal reservoirs kept at different temperatures. We show that many observables characterizing this operating mode and the performance of the machine are of geometric nature. Heat-work conversion mechanisms a…
▽ More
We present a general unified approach for the study of quantum thermal machines, including both heat engines and refrigerators, operating under periodic adiabatic driving and in contact with thermal reservoirs kept at different temperatures. We show that many observables characterizing this operating mode and the performance of the machine are of geometric nature. Heat-work conversion mechanisms and dissipation of energy can be described, respectively, by the antisymmetric and symmetric components of a thermal geometric tensor defined in the space of time-dependent parameters generalized to include the temperature bias. The antisymmetric component can be identified as a Berry curvature, while the symmetric component defines the metric of the manifold. We show that the operation of adiabatic thermal machines, and consequently also their efficiency, are intimately related to these geometric aspects. We illustrate these ideas by discussing two specific cases: a slowly driven qubit asymmetrically coupled to two bosonic reservoirs kept at different temperatures, and a quantum dot driven by a rotating magnetic field and strongly coupled to electron reservoirs with different polarizations. Both examples are already amenable for an experimental verification.
△ Less
Submitted 9 June, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
First Measurement of the Total Neutron Cross Section on Argon Between 100 and 800 MeV
Authors:
B. Bhandari,
J. Bian,
K. Bilton,
C. Callahan,
J. Chaves,
H. Chen,
D. Cline,
R. L. Cooper,
D. Danielson,
J. Danielson,
N. Dokania,
S. Elliott,
S. Fernandes,
S. Gardiner,
G. Garvey,
V. Gehman,
F. Giuliani,
S. Glavin,
M. Gold,
C. Grant,
E. Guardincerri,
T. Haines,
A. Higuera,
J. Y. Ji,
R. Kadel
, et al. (51 additional authors not shown)
Abstract:
We report the first measurement of the neutron cross section on argon in the energy range of 100-800 MeV. The measurement was obtained with a 4.3-hour exposure of the Mini-CAPTAIN detector to the WNR/LANSCE beam at LANL. The total cross section is measured from the attenuation coefficient of the neutron flux as it traverses the liquid argon volume. A set of 2,631 candidate interactions is divided…
▽ More
We report the first measurement of the neutron cross section on argon in the energy range of 100-800 MeV. The measurement was obtained with a 4.3-hour exposure of the Mini-CAPTAIN detector to the WNR/LANSCE beam at LANL. The total cross section is measured from the attenuation coefficient of the neutron flux as it traverses the liquid argon volume. A set of 2,631 candidate interactions is divided in bins of the neutron kinetic energy calculated from time-of-flight measurements. These interactions are reconstructed with custom-made algorithms specifically designed for the data in a time projection chamber the size of the Mini-CAPTAIN detector. The energy averaged cross section is $0.91 \pm{} 0.10~\mathrm{(stat.)} \pm{} 0.09~\mathrm{(sys.)}~\mathrm{barns}$. A comparison of the measured cross section is made to the GEANT4 and FLUKA event generator packages.
△ Less
Submitted 26 June, 2019; v1 submitted 12 March, 2019;
originally announced March 2019.
-
Non-Linear Thermovoltage in a Single-Electron Transistor
Authors:
Paolo A. Erdman,
Joonas T. Peltonen,
Bibek Bhandari,
Bivas Dutta,
Hervé Courtois,
Rosario Fazio,
Fabio Taddei,
Jukka P. Pekola
Abstract:
We perform direct thermovoltage measurements in a single-electron transistor, using on-chip local thermometers, both in the linear and non-linear regimes. Using a model which accounts for co-tunneling, we find excellent agreement with the experimental data with no free parameters even when the temperature difference is larger than the average temperature (far-from-linear regime). This allows us to…
▽ More
We perform direct thermovoltage measurements in a single-electron transistor, using on-chip local thermometers, both in the linear and non-linear regimes. Using a model which accounts for co-tunneling, we find excellent agreement with the experimental data with no free parameters even when the temperature difference is larger than the average temperature (far-from-linear regime). This allows us to confirm the sensitivity of the thermovoltage on co-tunneling and to find that in the non-linear regime the temperature of the metallic island is a crucial parameter. Surprisingly, the metallic island tends to overheat even at zero net charge current, resulting in a reduction of the thermovoltage.
△ Less
Submitted 16 December, 2018;
originally announced December 2018.
-
Optimal probabilistic work extraction beyond the free energy difference with a single-electron device
Authors:
Olivier Maillet,
Paolo A. Erdman,
Vasco Cavina,
Bibek Bhandari,
Elsa T. Mannila,
Joonas T. Peltonen,
Andrea Mari,
Fabio Taddei,
Christopher Jarzynski,
Vittorio Giovannetti,
Jukka P. Pekola
Abstract:
We experimentally realize protocols that allow to extract work beyond the free energy difference from a single electron transistor at the single thermodynamic trajectory level. With two carefully designed out-of-equilibrium driving cycles featuring kicks of the control parameter, we demonstrate work extraction up to large fractions of $k_BT$ or with probabilities substantially greater than 1/2, de…
▽ More
We experimentally realize protocols that allow to extract work beyond the free energy difference from a single electron transistor at the single thermodynamic trajectory level. With two carefully designed out-of-equilibrium driving cycles featuring kicks of the control parameter, we demonstrate work extraction up to large fractions of $k_BT$ or with probabilities substantially greater than 1/2, despite zero free energy difference over the cycle. Our results are explained in the framework of nonequilibrium fluctuation relations. We thus show that irreversibility can be used as a resource for optimal work extraction even in the absence of feedback from an external operator.
△ Less
Submitted 25 February, 2019; v1 submitted 15 October, 2018;
originally announced October 2018.
-
A Preliminary Study On Emerging Cloud Computing Security Challenges
Authors:
Babin Bhandari,
James Zheng
Abstract:
Cloud computing is the internet based provisioning of the computing resources, software, and information on demand. Cloud Computing is referred to as one of most recent emerging paradigms of computing utilities. Since Cloud computing is the dominant infrastructure of the shared services over the internet, it is important to be aware of the security risk and the challenges associated with this emer…
▽ More
Cloud computing is the internet based provisioning of the computing resources, software, and information on demand. Cloud Computing is referred to as one of most recent emerging paradigms of computing utilities. Since Cloud computing is the dominant infrastructure of the shared services over the internet, it is important to be aware of the security risk and the challenges associated with this emerging computing paradigm. This survey provides a brief introduction to the cloud computing, its major characteristics, and service models. It also explores cloud security threats, lists a few security solutions , and proposes a promsing research direction to deal with the evolving security challenges in Cloud computing.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Absorption refrigerators based on Coulomb-coupled single-electron systems
Authors:
Paolo Andrea Erdman,
Bibek Bhandari,
Rosario Fazio,
Jukka P. Pekola,
Fabio Taddei
Abstract:
We analyze a simple implementation of an absorption refrigerator, a system that requires heat and not work to achieve refrigeration, based on two Coulomb coupled single-electron systems. We analytically determine the general condition to achieve cooling-by-heating, and we determine the system parameters that simultaneously maximize the cooling power and cooling coefficient of performance (COP) fin…
▽ More
We analyze a simple implementation of an absorption refrigerator, a system that requires heat and not work to achieve refrigeration, based on two Coulomb coupled single-electron systems. We analytically determine the general condition to achieve cooling-by-heating, and we determine the system parameters that simultaneously maximize the cooling power and cooling coefficient of performance (COP) finding that the system displays a particularly simple COP that can reach Carnot's upper limit. We also find that the cooling power can be indirectly determined by measuring a charge current. Analyzing the system as an autonomous Maxwell demon, we find that the highest efficiencies for information creation and consumption can be achieved, and we relate the COP to these efficiencies. Finally, we propose two possible experimental setups based on quantum dots or metallic islands that implement the non-trivial cooling condition. Using realistic parameters, we show that these systems, which resemble existing experimental setups, can develop an observable cooling power.
△ Less
Submitted 1 August, 2018; v1 submitted 4 May, 2018;
originally announced May 2018.
-
Thermal drag in electronic conductors
Authors:
Bibek Bhandari,
Giuliano Chiriacò,
Paolo A. Erdman,
Rosario Fazio,
Fabio Taddei
Abstract:
We study the electronic thermal drag in two different Coulomb-coupled systems, the first one composed of two Coulomb blockaded metallic islands and the second one consisting of two parallel quantum wires. The two conductors of each system are electrically isolated and placed in the two circuits (the drive and the drag) of a four-electrode setup. The systems are biased, either by a temperature…
▽ More
We study the electronic thermal drag in two different Coulomb-coupled systems, the first one composed of two Coulomb blockaded metallic islands and the second one consisting of two parallel quantum wires. The two conductors of each system are electrically isolated and placed in the two circuits (the drive and the drag) of a four-electrode setup. The systems are biased, either by a temperature $ΔT$ or a voltage $V$ difference, on the drive circuit, while no biases are present on the drag circuit. In the case of a pair of metallic islands we use a master equation approach to determine the general properties of the dragged heat current $I^{\rm (h)}_{\rm drag}$, accounting also for co-tunneling contributions and the presence of large biases. Analytic results are obtained in the sequential tunneling regime for small biases, finding, in particular, that $I^{\rm (h)}_{\rm drag}$ is quadratic in $ΔT$ or $V$ and non-monotonous as a function of the inter-island coupling. Finally, by replacing one of the electrodes in the drag circuit with a superconductor, we find that heat can be extracted from the other normal electrode. In the case of the two interacting quantum wires, using the Luttinger liquid theory and the bosonization technique, we derive an analytic expression for the thermal trans-resistivity $ρ^{\rm (h)}_{12}$, in the weak-coupling limit and at low temperatures. $ρ^{\rm (h)}_{12}$ turns out to be proportional to the electric trans-resistivity $ρ^{\rm (c)}_{12}$, in such a way that their ratio (a kind of Wiedemann-Franz law) is proportional to $T^3$. We find that the thermal trans-resistivity is proportional to $T$ for low temperatures and decreases like $1/T$ for intermediate temperatures or like $1/T^3$ for high temperatures. We complete our analyses by performing numerical simulations that confirm the above results and allow to access the strong coupling regime.
△ Less
Submitted 11 July, 2018; v1 submitted 28 February, 2018;
originally announced February 2018.
-
Spin Resolved Scattering and Spin-Orbital Entanglement in Mesoscopic Conductors
Authors:
Bibek Bhandari
Abstract:
In this article, we have discussed about the scattering of charge and spin in spin-resolved mesoscopic systems. We have proposed a method to generate and detect the entanglement of electronic spin and electronic orbital degrees of freedom. It is observed that in a spin-resolved mesoscopic system, all form of entanglement existing between different electronic degrees of freedom can be generated. A…
▽ More
In this article, we have discussed about the scattering of charge and spin in spin-resolved mesoscopic systems. We have proposed a method to generate and detect the entanglement of electronic spin and electronic orbital degrees of freedom. It is observed that in a spin-resolved mesoscopic system, all form of entanglement existing between different electronic degrees of freedom can be generated. A method to detect Bell's inequality violation in terms of zero frequency current cross-correlators has been mentioned. Further, we have also studied the effect of quantum interference between spin flip and non-spin flip scattering matrices in determining the current and noise. We have obtained the expression for shot noise of spin and charge current when an arbitrarily polarised charge current is scattered at the spin resolved potential.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 1: The LBNF and DUNE Projects
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (780 additional authors not shown)
Abstract:
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modu…
▽ More
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modular liquid argon time-projection chamber (LArTPC) located deep underground, coupled to the LBNF multi-megawatt wide-band neutrino beam. DUNE will also have a high-resolution and high-precision near detector.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report, Volume 4 The DUNE Detectors at LBNF
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (779 additional authors not shown)
Abstract:
A description of the proposed detector(s) for DUNE at LBNF
A description of the proposed detector(s) for DUNE at LBNF
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 2: The Physics Program for DUNE at LBNF
Authors:
DUNE Collaboration,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz
, et al. (780 additional authors not shown)
Abstract:
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
△ Less
Submitted 22 January, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Wettability Induced Crack Dynamics and Morphology
Authors:
Udita Uday Ghosh,
Monojit Chakraborty,
Aditya Bikram Bhandari,
Suman Chakraborty,
Sunando DasGupta
Abstract:
Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural drying to outline the effects of substrate surface energies over the dry-out characteristics with emphasis on crack dynamics, crack morphology and underlying par…
▽ More
Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural drying to outline the effects of substrate surface energies over the dry-out characteristics with emphasis on crack dynamics, crack morphology and underlying particle arrangements. Experimental findings indicate that number of cracks formed decreases with increase in substrate hydrophobicity. These physical phenomena have been explained based on the magnitude of stress dissipation incurred by the substrate. DLVO predictions are also found to be in tune with the reported experimental investigations.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
The Long-Baseline Neutrino Experiment: Exploring Fundamental Symmetries of the Universe
Authors:
LBNE Collaboration,
Corey Adams,
David Adams,
Tarek Akiri,
Tyler Alion,
Kris Anderson,
Costas Andreopoulos,
Mike Andrews,
Ioana Anghel,
João Carlos Costa dos Anjos,
Maddalena Antonello,
Enrique Arrieta-Diaz,
Marina Artuso,
Jonathan Asaadi,
Xinhua Bai,
Bagdat Baibussinov,
Michael Baird,
Baha Balantekin,
Bruce Baller,
Brian Baptista,
D'Ann Barker,
Gary Barker,
William A. Barletta,
Giles Barr,
Larry Bartoszek
, et al. (461 additional authors not shown)
Abstract:
The preponderance of matter over antimatter in the early Universe, the dynamics of the supernova bursts that produced the heavy elements necessary for life and whether protons eventually decay --- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our Universe, its current state and its eventual fate. The Long-Baseline Neutrino Exp…
▽ More
The preponderance of matter over antimatter in the early Universe, the dynamics of the supernova bursts that produced the heavy elements necessary for life and whether protons eventually decay --- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our Universe, its current state and its eventual fate. The Long-Baseline Neutrino Experiment (LBNE) represents an extensively developed plan for a world-class experiment dedicated to addressing these questions. LBNE is conceived around three central components: (1) a new, high-intensity neutrino source generated from a megawatt-class proton accelerator at Fermi National Accelerator Laboratory, (2) a near neutrino detector just downstream of the source, and (3) a massive liquid argon time-projection chamber deployed as a far detector deep underground at the Sanford Underground Research Facility. This facility, located at the site of the former Homestake Mine in Lead, South Dakota, is approximately 1,300 km from the neutrino source at Fermilab -- a distance (baseline) that delivers optimal sensitivity to neutrino charge-parity symmetry violation and mass ordering effects. This ambitious yet cost-effective design incorporates scalability and flexibility and can accommodate a variety of upgrades and contributions. With its exceptional combination of experimental configuration, technical capabilities, and potential for transformative discoveries, LBNE promises to be a vital facility for the field of particle physics worldwide, providing physicists from around the globe with opportunities to collaborate in a twenty to thirty year program of exciting science. In this document we provide a comprehensive overview of LBNE's scientific objectives, its place in the landscape of neutrino physics worldwide, the technologies it will incorporate and the capabilities it will possess.
△ Less
Submitted 22 April, 2014; v1 submitted 28 July, 2013;
originally announced July 2013.
-
Overview of MC CDMA PAPR Reduction Techniques
Authors:
B. Sarala,
D. S. Venkateswarulu,
B. N. Bhandari
Abstract:
High Peak to Average Power Ratio (PAPR) of the transmitted signal is a critical problem in multicarrier modulation systems (MCM) such as Orthogonal Frequency Division Multiplexing (OFDM), and Multi-Carrier Code Division Multiple Access (MC CDMA) systems, due to large number of subcarriers. High PAPR leads to reduced resolution, and battery life. It also deteriorates system performance. This paper…
▽ More
High Peak to Average Power Ratio (PAPR) of the transmitted signal is a critical problem in multicarrier modulation systems (MCM) such as Orthogonal Frequency Division Multiplexing (OFDM), and Multi-Carrier Code Division Multiple Access (MC CDMA) systems, due to large number of subcarriers. High PAPR leads to reduced resolution, and battery life. It also deteriorates system performance. This paper focuses on review of different PAPR reduction techniques with attendant technical issues as well as criteria for selection of PAPR reduction technique. To reduce PAPR the constraints are low power consumption, and low Bit Error Rate (BER). Spectral bandwidth is improved by better spectral characteristics, and low complexity/cost.
△ Less
Submitted 10 April, 2012;
originally announced April 2012.