-
Very High-Resolution Bridge Deformation Monitoring Using UAV-based Photogrammetry
Authors:
Mehdi Maboudi,
Jan Backhaus,
Yahya Ghassoun,
Yogesh Khedar,
Dirk Lowke,
Inka Mai,
Bjoern Riedel,
Ulf Bestmann,
Markus Gerke
Abstract:
Accurate and efficient structural health monitoring of infrastructure objects such as bridges is a vital task, as many existing constructions have already reached or are approaching their planned service life. In this contribution, we address the question of the suitability of UAV-based monitoring for SHM, in particular focusing on the geometric deformation under load. Such an advanced technology…
▽ More
Accurate and efficient structural health monitoring of infrastructure objects such as bridges is a vital task, as many existing constructions have already reached or are approaching their planned service life. In this contribution, we address the question of the suitability of UAV-based monitoring for SHM, in particular focusing on the geometric deformation under load. Such an advanced technology is becoming increasingly popular due to its ability to decrease the cost and risk of tedious traditional inspection methods. To this end, we performed extensive tests employing a research reinforced concrete bridge that can be exposed to a predefined load via ground anchors. Very high-resolution image blocks have been captured before, during, and after the application of controlled loads. From those images, the motion of distinct points on the bridge has been monitored, and in addition, dense image point clouds were computed to evaluate the performance of surface-based data acquisition. Moreover, a geodetic control network in stable regions is used as control information for bundle adjustment. We applied different sensing technologies in order to be able to judge the image-based deformation results: displacement transducers, tachymetry, and laser profiling. As a platform for the photogrammetric measurements, a multi-rotor UAV DJI Matrice 600 Pro was employed, equipped with two RTK-GNSS receivers. The mounted camera was a PhaseOne iXM-100 (100MP) with an 80 mm lens. With a flying height of 30 m above the terrain, this resulted in a GSD of 1.3 mm while a forward and sideward overlap of 80% was maintained. The comparison with reference data (displacement transducers) reveals a difference of less than 1 mm. We show that by employing the introduced UAV-based monitoring approach, a full area-wide quantification of deformation is possible in contrast to classical point or profile measurements.
△ Less
Submitted 9 October, 2024;
originally announced October 2024.
-
OpenREALM: Real-time Mapping for Unmanned Aerial Vehicles
Authors:
Alexander Kern,
Markus Bobbe,
Yogesh Khedar,
Ulf Bestmann
Abstract:
This paper presents OpenREALM, a real-time mapping framework for Unmanned Aerial Vehicles (UAVs). A camera attached to the onboard computer of a moving UAV is utilized to acquire high resolution image mosaics of a targeted area of interest. Different modes of operation allow OpenREALM to perform simple stitching assuming an approximate plane ground, or to fully recover complex 3D surface informati…
▽ More
This paper presents OpenREALM, a real-time mapping framework for Unmanned Aerial Vehicles (UAVs). A camera attached to the onboard computer of a moving UAV is utilized to acquire high resolution image mosaics of a targeted area of interest. Different modes of operation allow OpenREALM to perform simple stitching assuming an approximate plane ground, or to fully recover complex 3D surface information to extract both elevation maps and geometrically corrected orthophotos. Additionally, the global position of the UAV is used to georeference the data. In all modes incremental progress of the resulting map can be viewed live by an operator on the ground. Obtained, up-to-date surface information will be a push forward to a variety of UAV applications. For the benefit of the community, source code is public at https://github.com/laxnpander/OpenREALM.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
InfraRed Astronomy Satellite Swarm Interferometry (IRASSI): Overview and Study Results
Authors:
Hendrik Linz,
Divya Bhatia,
Luisa Buinhas,
Matthias Lezius,
Eloi Ferrer,
Roger Förstner,
Kathrin Frankl,
Mathias Philips-Blum,
Meiko Steen,
Ulf Bestmann,
Wolfgang Hänsel,
Ronald Holzwarth,
Oliver Krause,
Thomas Pany
Abstract:
The far-infrared (FIR) is one of the few wavelength ranges where no astronomical data with sub-arcsec resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. Information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, highly excited CO, and especially from water lines would, however, op…
▽ More
The far-infrared (FIR) is one of the few wavelength ranges where no astronomical data with sub-arcsec resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. Information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, highly excited CO, and especially from water lines would, however, open the door for transformative science. This calls for interferometric concepts. We present first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for a FIR space interferometer. Extending on the principal concept of the ESPRIT study, it features heterodyne interferometry within a swarm of 5 satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1" over the whole wavelength range of 1-6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by us. We first show how the science requirements translate into operational and design parameters. We have put much emphasis on the navigational aspects of such a free-flying satellite swarm operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard. We also address questions regarding the spacecraft architecture and how a thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. (abridged)
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
