-
Minimal gap for higher dimensional sequences
Authors:
Tanmoy Bera
Abstract:
In this note, we extend the notion of minimal gaps to the higher dimensional sequences. We bound the minimal gap for $(\{\boldsymbol{a}_n\boldsymbolα\}),$ $(\{a_n\boldsymbolα\})$ and $(\{\boldsymbol{a}_n\cdot\boldsymbolα\})$ in terms of cardinality of the difference set of $a_n$ and $\boldsymbol{a}_n,$ where $a_n$ and $a_n^{(1)},\dots,a_n^{(d)}$ are sequences of distinct integers.
In this note, we extend the notion of minimal gaps to the higher dimensional sequences. We bound the minimal gap for $(\{\boldsymbol{a}_n\boldsymbolα\}),$ $(\{a_n\boldsymbolα\})$ and $(\{\boldsymbol{a}_n\cdot\boldsymbolα\})$ in terms of cardinality of the difference set of $a_n$ and $\boldsymbol{a}_n,$ where $a_n$ and $a_n^{(1)},\dots,a_n^{(d)}$ are sequences of distinct integers.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Poissonian pair correlation for higher dimensional real sequences
Authors:
Tanmoy Bera,
Mithun Kumar Das,
Anirban Mukhopadhyay
Abstract:
In this article, we examine the Poissonian pair correlation (PPC) statistic for higher-dimensional real sequences. Specifically, we demonstrate that for $d\geq 3$, almost all $(α_1,\ldots,α_d) \in \mathbb{R}^d$, the sequence $\big(\{x_nα_1\},\dots,\{x_nα_d\}\big)$ in $[0,1)^d$ has PPC conditionally on the additive energy bound of $(x_n).$ This bound is more relaxed compared to the additive energy…
▽ More
In this article, we examine the Poissonian pair correlation (PPC) statistic for higher-dimensional real sequences. Specifically, we demonstrate that for $d\geq 3$, almost all $(α_1,\ldots,α_d) \in \mathbb{R}^d$, the sequence $\big(\{x_nα_1\},\dots,\{x_nα_d\}\big)$ in $[0,1)^d$ has PPC conditionally on the additive energy bound of $(x_n).$ This bound is more relaxed compared to the additive energy bound for one dimension as discussed in [1]. More generally, we derive the PPC for $\big(\{x_n^{(1)}α_1\},\dots,\{x_n^{(d)}α_d\}\big) \in [0,1)^d$ for almost all $(α_1,\ldots,α_d) \in \mathbb{R}^d.$ As a consequence we establish the metric PPC for $(n^{θ_1},\ldots,n^{θ_d})$ provided that all of the $θ_i$'s are greater than two.
△ Less
Submitted 24 July, 2024; v1 submitted 14 October, 2023;
originally announced October 2023.
-
Single-photon induced instabilities in a cavity electromechanical device
Authors:
Tanmoy Bera,
Mridul Kandpal,
G. S. Agarwal,
Vibhor Singh
Abstract:
Cavity-electromechanical systems are extensively used for sensing and controlling the vibrations of mechanical resonators down to their quantum limit. The nonlinear radiation-pressure interaction in these systems could result in an unstable response of the mechanical resonator showing features such as frequency-combs, period-doubling bifurcations and chaos. However, due to weak light-matter intera…
▽ More
Cavity-electromechanical systems are extensively used for sensing and controlling the vibrations of mechanical resonators down to their quantum limit. The nonlinear radiation-pressure interaction in these systems could result in an unstable response of the mechanical resonator showing features such as frequency-combs, period-doubling bifurcations and chaos. However, due to weak light-matter interaction, typically these effects appear at very high driving strengths. By using polariton modes formed by a strongly coupled flux-tunable transmon and a microwave cavity, here we demonstrate an electromechanical device and achieve a single-photon coupling rate $g_0/2π$ of $160~$kHz, which is nearly 4\% of the mechanical frequency $ω_m$. Due to large $g_0/ω_m$ ratio, the device shows an unstable mechanical response resulting in frequency combs in sub-single photon limit. We systematically investigate the boundary of the unstable response and identify two important regimes governed by the optomechanical backaction and the nonlinearity of the electromagnetic mode. Such an improvement in the single-photon coupling rate and the observations of microwave frequency combs at single-photon levels may have applications in the quantum control of the motional states and critical parametric sensing. Our experiments strongly suggest the requirement of newer approaches to understand instabilities.
△ Less
Submitted 2 May, 2024; v1 submitted 13 September, 2023;
originally announced September 2023.
-
Enhancing Efficiency of Quadrupedal Locomotion over Challenging Terrains with Extensible Feet
Authors:
Lokesh Kumar,
Sarvesh Sortee,
Titas Bera,
Ranjan Dasgupta
Abstract:
Recent advancements in legged locomotion research have made legged robots a preferred choice for navigating challenging terrains when compared to their wheeled counterparts. This paper presents a novel locomotion policy, trained using Deep Reinforcement Learning, for a quadrupedal robot equipped with an additional prismatic joint between the knee and foot of each leg. The training is performed in…
▽ More
Recent advancements in legged locomotion research have made legged robots a preferred choice for navigating challenging terrains when compared to their wheeled counterparts. This paper presents a novel locomotion policy, trained using Deep Reinforcement Learning, for a quadrupedal robot equipped with an additional prismatic joint between the knee and foot of each leg. The training is performed in NVIDIA Isaac Gym simulation environment. Our study investigates the impact of these joints on maintaining the quadruped's desired height and following commanded velocities while traversing challenging terrains. We provide comparison results, based on a Cost of Transport (CoT) metric, between quadrupeds with and without prismatic joints. The learned policy is evaluated on a set of challenging terrains using the CoT metric in simulation. Our results demonstrate that the added degrees of actuation offer the locomotion policy more flexibility to use the extra joints to traverse terrains that would be deemed infeasible or prohibitively expensive for the conventional quadrupedal design, resulting in significantly improved efficiency.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
On the Collaborative Object Transportation Using Leader Follower Approach
Authors:
Sumanta Ghosh,
Subhajit Nath,
Sarvesh Sortee,
Lokesh Kumar,
Titas Bera
Abstract:
In this paper we address the multi-agent collaborative object transportation problem in a partially known environment with obstacles under a specified goal condition. We propose a leader follower approach for two mobile manipulators collaboratively transporting an object along specified desired trajectories. The proposed approach treats the mobile manipulation system as two independent subsystems:…
▽ More
In this paper we address the multi-agent collaborative object transportation problem in a partially known environment with obstacles under a specified goal condition. We propose a leader follower approach for two mobile manipulators collaboratively transporting an object along specified desired trajectories. The proposed approach treats the mobile manipulation system as two independent subsystems: a mobile platform and a manipulator arm and uses their kinematics model for trajectory tracking. In this work we considered that the mobile platform is subject to non-holonomic constraints, with a manipulator carrying a rigid load. The desired trajectories of the end points of the load are obtained from Probabilistic RoadMap-based planning approach. Our method combines Proportional Navigation Guidance-based approach with a proposed Stop-and-Sync algorithm to reach sufficiently close to the desired trajectory, the deviation due to the non-holonomic constraints is compensated by the manipulator arm. A leader follower approach for computing inverse kinematics solution for the position of the end-effector of the manipulator arm is proposed to maintain the load rigidity. Further, we compare the proposed approach with other approaches to analyse the efficacy of our algorithm.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Instabilities near ultrastrong coupling in microwave optomechanical cavity
Authors:
Soumya Ranjan Das,
Sourav Majumder,
Sudhir Kumar Sahu,
Ujjawal Singhal,
Tanmoy Bera,
Vibhor Singh
Abstract:
With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can…
▽ More
With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can nearly reach 81% of the mechanical frequency, overwhelming all the dissipation rates. Approaching the USC limit, the steady-state response becomes unstable. We systematically measure the boundary of the unstable response while varying the pump parameters. The unstable dynamics display rich phases, such as self-induced oscillations, period-doubling bifurcation, period-tripling oscillations, and ultimately leading to the chaotic behavior. The experimental results and their theoretical modeling suggest the importance of residual nonlinear interaction terms in the weak-dissipative regime.
△ Less
Submitted 18 August, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
On higher dimensional Poissonian pair correlation
Authors:
Tanmoy Bera,
Mithun Kumar Das,
Anirban Mukhopadhyay
Abstract:
In this article we study the pair correlation statistic for higher dimensional sequences. We show that for any $d\geq 2$, strictly increasing sequences $(a_n^{(1)}),\ldots, (a_n^{(d)})$ of natural numbers have metric Poissonian pair correlation with respect to sup-norm if their joint additive energy is $O(N^{3-δ})$ for any $δ>0$. Further, in two dimension, we establish an analogous result with res…
▽ More
In this article we study the pair correlation statistic for higher dimensional sequences. We show that for any $d\geq 2$, strictly increasing sequences $(a_n^{(1)}),\ldots, (a_n^{(d)})$ of natural numbers have metric Poissonian pair correlation with respect to sup-norm if their joint additive energy is $O(N^{3-δ})$ for any $δ>0$. Further, in two dimension, we establish an analogous result with respect to $2$-norm. As a consequence, it follows that $(\{nα\}, \{n^2β\})$ and $(\{nα\}, \{[n\log^An]β\})$ ($A \in [1,2]$) have Poissonian pair correlation for almost all $(α,β)\in \mathbb{R}^2$ with respect to sup-norm and $2$-norm. This gives a negative answer to the question raised by Hofer and Kaltenböck [15]. The proof uses estimates for 'Generalized' GCD-sums.
△ Less
Submitted 17 August, 2023; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Prospects of cooling a mechanical resonator with a transmon qubit in c-QED setup
Authors:
Sourav Majumder,
Tanmoy Bera,
Vibhor Singh
Abstract:
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode…
▽ More
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by modulation of the SQUID inductance. In such a tri-partite system, we analyze the steady-state occupation of the mechanical mode when all three modes are dispersively coupled. We use the quantum-noise and the Lindblad formalism to show that the sideband cooling of the mechanical mode to its ground state is achievable. We further experimentally demonstrate that measurements of the thermomechanical motion is possible in the dispersive limit, while maintaining a large coupling between qubit and mechanical mode. Our theoretical calculations suggest that single-photon strong coupling is within the experimental reach in such hybrid devices.
△ Less
Submitted 14 May, 2022;
originally announced May 2022.
-
A fast tunable 3D-transmon architecture for superconducting qubit-based hybrid devices
Authors:
Sourav Majumder,
Tanmoy Bera,
Ramya Suresh,
Vibhor Singh
Abstract:
Superconducting qubits utilize the strong non-linearity of the Josephson junctions. Control over the Josephson nonlinearity, either by a current bias or by the magnetic flux, can be a valuable resource that brings tunability in the hybrid system consisting of superconducting qubits. To enable such a control, here we incorporate a fast-flux line for a frequency tunable transmon qubit in 3D cavity a…
▽ More
Superconducting qubits utilize the strong non-linearity of the Josephson junctions. Control over the Josephson nonlinearity, either by a current bias or by the magnetic flux, can be a valuable resource that brings tunability in the hybrid system consisting of superconducting qubits. To enable such a control, here we incorporate a fast-flux line for a frequency tunable transmon qubit in 3D cavity architecture. We investigate the flux-dependent dynamic range, relaxation from unconfined states, and the bandwidth of the flux-line. Using time-domain measurements, we probe transmon's relaxation from higher energy levels after populating the cavity with $\approx 2.1\times10^4$ photons. For the device used in the experiment, we find a resurgence time corresponding to the recovery of coherence to be 4.8~$μ$s. We use a fast-flux line to tune the qubit frequency and demonstrate the swap of a single excitation between cavity and qubit mode. By measuring the deviation in the transferred population from the theoretical prediction, we estimate the bandwidth of the flux line to be $\approx$~100~MHz, limited by the parasitic effect in the design. These results suggest that the approach taken here to implement a fast-flux line in a 3D cavity could be helpful for the hybrid devices based on the superconducting qubit.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
A Levy Flight based Narrow Passage Sampling Method for Probabilistic Roadmap Planners
Authors:
Shubham Shukla,
Lokesh Kumar,
Titas Bera,
Ranjan Dasgupta
Abstract:
Sampling based probabilistic roadmap planners (PRM) have been successful in motion planning of robots with higher degrees of freedom, but may fail to capture the connectivity of the configuration space in scenarios with a critical narrow passage. In this paper, we show a novel technique based on Levy Flights to generate key samples in the narrow regions of configuration space, which, when combined…
▽ More
Sampling based probabilistic roadmap planners (PRM) have been successful in motion planning of robots with higher degrees of freedom, but may fail to capture the connectivity of the configuration space in scenarios with a critical narrow passage. In this paper, we show a novel technique based on Levy Flights to generate key samples in the narrow regions of configuration space, which, when combined with a PRM, improves the completeness of the planner. The technique substantially improves sample quality at the expense of a minimal additional computation, when compared with pure random walk based methods, however, still outperforms state of the art random bridge building method, in terms of number of collision calls, computational overhead and sample quality. The method is robust to the changes in the parameters related to the structure of the narrow passage, thus giving an additional generality. A number of 2D & 3D motion planning simulations are presented which shows the effectiveness of the method.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Large flux-mediated coupling in hybrid electromechanical system with a transmon qubit
Authors:
Tanmoy Bera,
Sourav Majumder,
Sudhir Kumar Sahu,
Vibhor Singh
Abstract:
Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been q…
▽ More
Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we realize a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a novel platform to realize rich interactions and could potentially provide full control over the quantum motional states.
△ Less
Submitted 28 October, 2020; v1 submitted 16 January, 2020;
originally announced January 2020.
-
Analysis of Obstacle based Probabilistic RoadMap Method using Geometric Probability
Authors:
Titas Bera,
M. Seetharama Bhat,
Debasish Ghose
Abstract:
Sampling based planners have been successful in robot motion planning, with many degrees of freedom, but still remain ineffective in the presence of narrow passages within the configuration space. There exist several heuristics, which generate samples in the critical regions and improve the efficiency of probabilistic roadmap planners. In this paper, we present an evaluation of success probability…
▽ More
Sampling based planners have been successful in robot motion planning, with many degrees of freedom, but still remain ineffective in the presence of narrow passages within the configuration space. There exist several heuristics, which generate samples in the critical regions and improve the efficiency of probabilistic roadmap planners. In this paper, we present an evaluation of success probability of one such heuristic method, called obstacle based probabilistic roadmap planners or OBPRM, using geometric probability theory. The result indicates that the probability of success of generating free sample points around the surface of the $n$ dimensional configuration space obstacle is directly proportional to the surface area of the obstacles.
△ Less
Submitted 31 May, 2019;
originally announced June 2019.
-
Asymptotic Optimality of Rapidly Exploring Random Tree
Authors:
Titas Bera,
Debasish Ghose,
Sundaram Suresh
Abstract:
In this paper we investigate the asymptotic optimality property of a randomized sampling based motion planner, namely RRT. We prove that a RRT planner is not an asymptotically optimal motion planner. Our result, while being consistent with similar results which exist in the literature, however, brings out an important characteristics of a RRT planner. We show that the degree distribution of the tr…
▽ More
In this paper we investigate the asymptotic optimality property of a randomized sampling based motion planner, namely RRT. We prove that a RRT planner is not an asymptotically optimal motion planner. Our result, while being consistent with similar results which exist in the literature, however, brings out an important characteristics of a RRT planner. We show that the degree distribution of the tree vertices follows a power law in an asymptotic sense. A simulation result is presented to support the theoretical claim. Based on these results we also try to establish a simple necessary condition for sampling based motion planners to be asymptotically optimal.
△ Less
Submitted 13 July, 2017;
originally announced July 2017.
-
An Integrated Decision and Control Theoretic Solution to Multi-Agent Co-Operative Search Problems
Authors:
Titas Bera,
Rajarshi Bardhan,
Sundaram Suresh
Abstract:
This paper considers the problem of autonomous multi-agent cooperative target search in an unknown environment using a decentralized framework under a no-communication scenario. The targets are considered as static targets and the agents are considered to be homogeneous. The no-communication scenario translates as the agents do not exchange either the information about the environment or their act…
▽ More
This paper considers the problem of autonomous multi-agent cooperative target search in an unknown environment using a decentralized framework under a no-communication scenario. The targets are considered as static targets and the agents are considered to be homogeneous. The no-communication scenario translates as the agents do not exchange either the information about the environment or their actions among themselves. We propose an integrated decision and control theoretic solution for a search problem which generates feasible agent trajectories. In particular, a perception based algorithm is proposed which allows an agent to estimate the probable strategies of other agents' and to choose a decision based on such estimation. The algorithm shows robustness with respect to the estimation accuracy to a certain degree. The performance of the algorithm is compared with random strategies and numerical simulation shows considerable advantages.
△ Less
Submitted 11 March, 2020; v1 submitted 24 April, 2017;
originally announced April 2017.
-
n-type SnSe$_{1-x}$ for Thermoelectric Application
Authors:
Tutul Bera,
Anup V. Sanchela,
C. V. Tomy,
Ajay D. Thakur
Abstract:
We report the synthesis of n-type SnSe$_{1-x}$ using a self-sacrificial, facile, solvo-thermal synthesis route. Electrical and thermal transport measurements suggest a low thermal conductivity and a significant thermopower in the temperature range 100 - 400\,K. We also propose the possibility of developing an all SnSe thermoelectric module.
We report the synthesis of n-type SnSe$_{1-x}$ using a self-sacrificial, facile, solvo-thermal synthesis route. Electrical and thermal transport measurements suggest a low thermal conductivity and a significant thermopower in the temperature range 100 - 400\,K. We also propose the possibility of developing an all SnSe thermoelectric module.
△ Less
Submitted 6 January, 2016; v1 submitted 5 January, 2016;
originally announced January 2016.
-
Generalised intuitionistic fuzzy soft sets and its application in decision making
Authors:
Bivas Dinda,
Tuhin Bera,
T. K. Samanta
Abstract:
In this paper, generalised intuitionistic fuzzy soft sets and relations on generalised intuitionistic fuzzy soft sets are defined and a few of their properties are studied. An application of generalised intuitionistic fuzzy soft sets in decision making with respect to degree of preference is investigated.
In this paper, generalised intuitionistic fuzzy soft sets and relations on generalised intuitionistic fuzzy soft sets are defined and a few of their properties are studied. An application of generalised intuitionistic fuzzy soft sets in decision making with respect to degree of preference is investigated.
△ Less
Submitted 12 October, 2010;
originally announced October 2010.
-
Measuring the Penetration Depth Anisotropy in MgB$_2$ using Small-Angle Neutron Scattering
Authors:
D. Pal,
L. DeBeer-Schmitt,
T. Bera,
R. Cubitt,
C. D. Dewhurst,
J. Jun,
N. D. Zhigadlo,
J. Karpinski,
V. G. Kogan,
M. R. Eskildsen
Abstract:
Using small-angle neutron scattering we have measured the misalignment between an applied field of 4 kOe and the flux-line lattice in MgB$_2$, as the field is rotated away from the c axis by an angle $θ$. The measurements, performed at 4.9 K, showed the vortices canting towards the c axis for all field orientations. Using a two-band/two-gap model to calculate the magnetization we are able to fit…
▽ More
Using small-angle neutron scattering we have measured the misalignment between an applied field of 4 kOe and the flux-line lattice in MgB$_2$, as the field is rotated away from the c axis by an angle $θ$. The measurements, performed at 4.9 K, showed the vortices canting towards the c axis for all field orientations. Using a two-band/two-gap model to calculate the magnetization we are able to fit our results yielding a penetration depth anisotropy, $\glam = 1.1 \pm 0.1$.
△ Less
Submitted 13 February, 2006; v1 submitted 15 November, 2005;
originally announced November 2005.
