-
Bandwidth-tunable Telecom Single Photons Enabled by Low-noise Optomechanical Transduction
Authors:
Liu Chen,
Alexander Rolf Korsch,
Cauê Moreno Kersul,
Rodrigo Benevides,
Yong Yu,
Thiago P. Mayer Alegre,
Simon Gröblacher
Abstract:
Single-photon sources are of fundamental importance to emergent quantum technologies. Nano-structured optomechanical crystals provide an attractive platform for single photon generation due to their unique engineering freedom and compatibility with on-chip silicon fabrication. However, optical absorption heating has thus far prevented these systems from being widely used in practical applications.…
▽ More
Single-photon sources are of fundamental importance to emergent quantum technologies. Nano-structured optomechanical crystals provide an attractive platform for single photon generation due to their unique engineering freedom and compatibility with on-chip silicon fabrication. However, optical absorption heating has thus far prevented these systems from being widely used in practical applications. Here, we overcome this limitation through the use of a quasi-two-dimensional optomechanical crystal structure and demonstrate an on-chip source of single photons natively at telecom wavelength. We verify the low thermal noise and resulting high purity of the generated single photons through a Hanbury Brown-Twiss experiment with $g^{(2)}(0)=0.35^{+0.10}_{-0.08}$. Furthermore, we perform Hong-Ou-Mandel interference of the emitted photons showcasing the indistinguishability and coherence of photons generated from our source with visibility $V=0.52 \pm 0.15$ after 1.43 km of fiber delay line. With the possibility of using the mechanical mode as a quantum memory, we can retrieve the single photons on-demand. Crucial for applications, the optomechanical interaction at the heart of our device allows the bandwidth of emitted single photons to be tuned over a large range from 100 kHz to several hundreds of MHz, which makes them directly compatible with leading quantum memory platforms.
△ Less
Submitted 14 October, 2024;
originally announced October 2024.
-
Quasiparticle dynamics in a superconducting qubit irradiated by a localized infrared source
Authors:
Rodrigo Benevides,
Maxwell Drimmer,
Giacomo Bisson,
Francesco Adinolfi,
Uwe von Lüpke,
Hugo Michiel Doeleman,
Gianluigi Catelani,
Yiwen Chu
Abstract:
A known source of decoherence in superconducting qubits is the presence of broken Cooper pairs, or quasiparticles. These can be generated by high-energy radiation, either present in the environment or purposefully introduced, as in the case of some hybrid quantum devices. Here, we systematically study the properties of a transmon qubit under illumination by focused infrared radiation with various…
▽ More
A known source of decoherence in superconducting qubits is the presence of broken Cooper pairs, or quasiparticles. These can be generated by high-energy radiation, either present in the environment or purposefully introduced, as in the case of some hybrid quantum devices. Here, we systematically study the properties of a transmon qubit under illumination by focused infrared radiation with various powers, durations, and spatial locations. Despite the high energy of incident photons, our observations agree well with a model of low-energy quasiparticle dynamics dominated by trapping. This technique can be used for understanding and potentially mitigating the effects of high-energy radiation on superconducting circuits with a variety of geometries and materials.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
Brillouin optomechanics in the quantum ground state
Authors:
H. M. Doeleman,
T. Schatteburg,
R. Benevides,
S. Vollenweider,
D. Macri,
Y. Chu
Abstract:
Bulk acoustic wave (BAW) resonators are attractive as intermediaries in a microwave-to-optical transducer, due to their long coherence times and controllable coupling to optical photons and superconducting qubits. However, for an optomechanical transducer to operate without detrimental added noise, the mechanical modes must be in the quantum ground state. This has proven challenging in recent demo…
▽ More
Bulk acoustic wave (BAW) resonators are attractive as intermediaries in a microwave-to-optical transducer, due to their long coherence times and controllable coupling to optical photons and superconducting qubits. However, for an optomechanical transducer to operate without detrimental added noise, the mechanical modes must be in the quantum ground state. This has proven challenging in recent demonstrations of transduction based on other types of mechanical resonators, where absorption of laser light caused heating of the phonon modes. In this work, we demonstrate ground state operation of a Brillouin optomechanical system composed of a quartz BAW resonator inside an optical cavity. The system is operated at $\sim$200 mK temperatures inside a dilution refrigerator, which is made possible by designing the system so that it self-aligns during cooldown and is relatively insensitive to mechanical vibrations. We show optomechanical coupling to several phonon modes and perform sideband asymmetry thermometry to demonstrate a thermal occupation below 0.5 phonons at base temperature. This constitutes the heaviest ($\sim$494 $μ$g) mechanical object measured in the quantum ground state to date. Further measurements confirm a negligible effect of laser heating on this phonon occupation. Our results pave the way toward low-noise, high-efficiency microwave-to-optical transduction based on BAW resonators.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Dissipative Optomechanics in High-Frequency Nanomechanical Resonators
Authors:
André G. Primo,
Pedro V. Pinho,
Rodrigo Benevides,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large…
▽ More
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large photon population in the cavity. Additionally, one could use dissipative optomechanics, where photons can be scattered directly from a waveguide into a resonator hence increasing the degree of control of the acousto-optic interplay. Hitherto, such dissipative optomechanical interaction was only demonstrated at low mechanical frequencies, precluding prominent applications such as the quantum state transfer between photonic and phononic domains. Here, we show the first dissipative optomechanical system operating in the sideband-resolved regime, where the mechanical frequency is larger than the optical linewidth. Exploring this unprecedented regime, we demonstrate the impact of dissipative optomechanical coupling in reshaping both mechanical and optical spectra. Our figures represent a two-order-of-magnitude leap in the mechanical frequency and a tenfold increase in the dissipative optomechanical coupling rate compared to previous works. Further advances could enable the individual addressing of mechanical modes and help mitigate optical nonlinearities and absorption in optomechanical devices.
△ Less
Submitted 1 September, 2023; v1 submitted 29 December, 2022;
originally announced December 2022.
-
Silicon anisotropy in a bi-dimensional optomechanical cavity
Authors:
Cauê M. Kersul,
Rodrigo Benevides,
Flávio Moraes,
Gabriel H. M. de Aguiar,
Andreas Wallucks,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mecha…
▽ More
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mechanical band structure, which makes the devices more susceptible to fabrication imperfections. Finally, we show that our device is compatible with cryogenic measurements reaching ground state occupancy of 0.2 phonons at mK temperature.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Optomechanical quantum teleportation
Authors:
Niccolò Fiaschi,
Bas Hensen,
Andreas Wallucks,
Rodrigo Benevides,
Jie Li,
Thiago P. Mayer Alegre,
Simon Gröblacher
Abstract:
Quantum teleportation, the faithful transfer of an unknown input state onto a remote quantum system, is a key component in long distance quantum communication protocols and distributed quantum computing. At the same time, high frequency nano-optomechanical systems hold great promise as nodes in a future quantum network, operating on-chip at low-loss optical telecom wavelengths with long mechanical…
▽ More
Quantum teleportation, the faithful transfer of an unknown input state onto a remote quantum system, is a key component in long distance quantum communication protocols and distributed quantum computing. At the same time, high frequency nano-optomechanical systems hold great promise as nodes in a future quantum network, operating on-chip at low-loss optical telecom wavelengths with long mechanical lifetimes. Recent demonstrations include entanglement between two resonators, a quantum memory and microwave to optics transduction. Despite these successes, quantum teleportation of an optical input state onto a long-lived optomechanical memory is an outstanding challenge. Here we demonstrate quantum teleportation of a polarization-encoded optical input state onto the joint state of a pair of nanomechanical resonators. Our protocol also allows for the first time to store and retrieve an arbitrary qubit state onto a dual-rail encoded optomechanical quantum memory. This work demonstrates the full functionality of a single quantum repeater node, and presents a key milestone towards applications of optomechanical systems as quantum network nodes.
△ Less
Submitted 25 November, 2022; v1 submitted 5 April, 2021;
originally announced April 2021.
-
Accurate modeling and characterization of photothermal forces in optomechanics
Authors:
André G. Primo,
Cauê M. Kersul,
Rodrigo Benevides,
Natália C. Carvalho,
Michaël Ménard,
Newton C. Frateschi,
Pierre-Louis de Assis,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experi…
▽ More
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices.
△ Less
Submitted 7 July, 2021; v1 submitted 22 August, 2020;
originally announced August 2020.
-
High-Frequency GaAs Optomechanical Bullseye Resonator
Authors:
N. C. Carvalho,
R. Benevides,
M. Ménard,
G. S. Wiederhecker,
N. C. Frateschi,
T. P. Mayer Alegre
Abstract:
The integration of optomechanics and optoelectronics in a single device opens new possibilities for developing information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical res…
▽ More
The integration of optomechanics and optoelectronics in a single device opens new possibilities for developing information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical resonator with a ring-type bullseye geometry that is unprecedented in this platform. We measured mechanical modes up to 3.4 GHz with quality factors of 4000 (at 77 K) and optomechanical coupling rates up to 39 kHz at telecom wavelengths. Moreover, we investigated the material symmetry break due to elastic anisotropy and its impact on the mechanical mode spectrum. Finally, we assessed the temperature dependence of the mechanical losses and demonstrated the efficiency and anisotropy resilience of the bullseye anchor loss suppression, indicating that lower temperature operation may allow mechanical quality factors over $10^4$. Such characteristics are valuable for active optomechanics, coherent microwave-to-optics conversion via piezo-mechanics and other implementations of high-frequency oscillators in III-V materials.
△ Less
Submitted 23 October, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Proposal for optomechanical quantum teleportation
Authors:
Jie Li,
Andreas Wallucks,
Rodrigo Benevides,
Niccolo Fiaschi,
Bas Hensen,
Thiago P. Mayer Alegre,
Simon Gröblacher
Abstract:
We present a novel discrete-variable quantum teleportation scheme using pulsed optomechanics. In our proposal, we demonstrate how an unknown optical input state can be transferred onto the joint state of a pair of mechanical oscillators, without physically interacting with one another. We further analyze how experimental imperfections will affect the fidelity of the teleportation and highlight how…
▽ More
We present a novel discrete-variable quantum teleportation scheme using pulsed optomechanics. In our proposal, we demonstrate how an unknown optical input state can be transferred onto the joint state of a pair of mechanical oscillators, without physically interacting with one another. We further analyze how experimental imperfections will affect the fidelity of the teleportation and highlight how our scheme can be realized in current state-of-the-art optomechanical systems.
△ Less
Submitted 3 September, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Bright and Vivid Diffractive-Plasmonic Structural Colors
Authors:
Emerson G. Melo,
Ana L. A. Ribeiro,
Rodrigo S. Benevides,
Antonio A. G. V. Zuben,
Marcos V. P. Santos,
Alexandre A. Silva,
Gustavo S. Wiederhecker,
Thiago P. M. Alegre
Abstract:
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Cr…
▽ More
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Creating vivid color reflecting surfaces is still a major challenge and could revolutionize low power consumption image displays. Here we combine diffraction and plasmonic effects to design bright and vivid-color reflecting surfaces. The periodic reflection patterns are designed through genetic algorithm optimization and are defined in aluminum coated silicon chips.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Ar/Cl$_{2}$ etching of GaAs optomechanical microdisks fabricated with positive electroresist
Authors:
Rodrigo Benevides,
Michaël Ménard,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality…
▽ More
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality factors of $Q_\text{opt}>2\times 10^{5}$, among the largest already reported for dry-etching devices. The final devices are also shown to present high mechanical quality factors and an optomechanical vacuum coupling constant of $g_{0}=2π\times 13.6$ kHz enabling self-sustainable mechanical oscillations for an optical input power above $1$ mW.
△ Less
Submitted 15 September, 2019;
originally announced September 2019.
-
Dynamic Epistemic Logic with Communication Actions
Authors:
Mario Roberto Folhadela Benevides,
Isaque Macalam Saab Lima
Abstract:
This work proposes a Dynamic Epistemic Logic with Communication Actions that can be performed concurrently. Unlike Concurrent Epistemic Action Logic introduced by Ditmarsch, Hoek and Kooi, where the concurrency mechanism is the so called true concurrency, here we use an approach based on process calculus, like CCS and CSP, and Action Models Logic. Our approach makes possible the proof of soundness…
▽ More
This work proposes a Dynamic Epistemic Logic with Communication Actions that can be performed concurrently. Unlike Concurrent Epistemic Action Logic introduced by Ditmarsch, Hoek and Kooi, where the concurrency mechanism is the so called true concurrency, here we use an approach based on process calculus, like CCS and CSP, and Action Models Logic. Our approach makes possible the proof of soundness, completeness and decidability, different from the others approaches. We present an axiomatization and show that the proof of soundness, completeness and decidability can be done using a reduction method.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Ultrahigh-Q optomechanical crystals cavities fabricated on a CMOS foundry
Authors:
Rodrigo Benevides,
Felipe G. S. Santos,
Gustavo O. Luiz,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challengi…
▽ More
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challenging design, these cavities are traditionally fabricated using dedicated high-resolution electron-beam lithography tools that are inherently slow, limiting this solution to small-scale applications or research. Here we show how to overcome this problem by using a deep-UV photolithography process to fabricate optomechanical crystals on a commercial CMOS foundry. We show that a careful design of the photonic crystals can withstand the limitations of the photolithography process, producing cavities with measured intrinsic optical quality factors as high as $Q_{i}=(1.21\pm0.02)\times10^{6}$. Optomechanical crystals are also created using phononic crystals to tightly confine the sound waves within the optical cavity that results in a measured vacuum optomechanical coupling rate of $g_{0}=2π\times(91\pm4)$ kHz. Efficient sideband cooling and amplification are also demonstrated since these cavities are in the resolved sideband regime. Further improvement in the design and fabrication process suggest that commercial foundry-based optomechanical cavities could be used for quantum ground-state cooling.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Efficient anchor loss suppression in coupled near-field optomechanical resonators
Authors:
Gustavo O. Luiz,
Felipe G. S. Santos,
Rodrigo S. Benevides,
Yovanny A. V. Espinel,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limit…
▽ More
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limited silicon near-field optomechanical resonators oscillating at tens of MHz. The effectiveness of our dissipation suppression scheme is investigated at room and cryogenic temperatures. While at room temperature we can reach a maximum quality factor of 7.61k ($fQ$-product of the order of $10^{11}$~Hz), at 22~K the quality factor increases to 37k, resulting in a $fQ$-product of $2\times10^{12}$~Hz.
△ Less
Submitted 2 October, 2017; v1 submitted 12 January, 2017;
originally announced January 2017.
-
Hybrid confinement of optical and mechanical modes in a bullseye optomechanical resonator
Authors:
Felipe G. S. Santos,
Yovanny A. V. Espinel,
Gustavo O. Luiz,
Rodrigo S. Benevides,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband lim…
▽ More
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband limit. Here we demonstrate a novel optomechanical cavity based on a disk with a radial mechanical bandgap. This design confines light and mechanical waves through distinct physical mechanisms which allows for independent control of the mechanical and optical properties. Our device design is not limited by unique material properties and could be easily adapted to allow large optomechanical coupling and high mechanical quality factors with other promising materials. Finally, our demonstration is based on devices fabricated on a commercial silicon photonics facility, demonstrating that our approach can be easily scalable.
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
CCS-Based Dynamic Logics for Communicating Concurrent Programs
Authors:
Mario R. F. Benevides,
L. Menasché Schechter
Abstract:
This work presents three increasingly expressive Dynamic Logics in which the programs are CCS processes (sCCS-PDL, CCS-PDL and XCCS-PDL). Their goal is to reason about properties of concurrent programs and systems described using CCS. In order to accomplish that, CCS's operators and constructions are added to a basic modal logic in order to create dynamic logics that are suitable for the descrip…
▽ More
This work presents three increasingly expressive Dynamic Logics in which the programs are CCS processes (sCCS-PDL, CCS-PDL and XCCS-PDL). Their goal is to reason about properties of concurrent programs and systems described using CCS. In order to accomplish that, CCS's operators and constructions are added to a basic modal logic in order to create dynamic logics that are suitable for the description and verification of properties of communicating, concurrent and non-deterministic programs and systems, in a similar way as PDL is used for the sequential case. We provide complete axiomatizations for the three logics. Unlike Peleg's Concurrent PDL with Channels, our logics have a simple Kripke semantics, complete axiomatizations and the finite model property.
△ Less
Submitted 31 March, 2009;
originally announced April 2009.
